Power Entry Modules with Line Filter C20F https://www.schurter.com /PG06 IEC Appliance Inlet C20 with Filter, Front or Rear Side Mounting Screw-on mounting Snap-in mounting Screw-on mounting from front side from front side from rear side with wires (stranded) C20 See below: Approvals and Compliances 70° C Description Characteristics - Panel Mount : - Compact design with optimal shielding Screw-on version from front or rear side, snap-in version from front Suitable for assembly in metal plated plastic housings - Version with class X1 and X2 (standard version) capacitors side - Universal line filter for standard applications - 2 Functions : - Suitable for use in equipment according to IEC/UL 60950 Appliance Inlet Protection class I , Line filter in standard and medical Suitable for use in medical equipment according to IEC/UL 60601-1 version - Solder, quick connect or wires (stranded) Other versions on request - 16A according to UL Unique Selling Proposition - Capacity CX 330 nF - Attractive flat front design - Highly resistant since fully potted References - Various filter variants Alternative: version without line filter 4793; 4798 - V-Lock cord retaining Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 16 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C20 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 20 A @ Ta 40 °C / 250 VAC; 60 Hz conditions) pin-temperature 70 °C, 16 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I medical < 5 µA (250 V / 60 Hz) Line Filter Standard and Medical Version, IEC Dielectric Strength > 1.7 kVDC between L-N 60939, UL 1283, CSA C22.2 no. 8 > 2.7 kVDC between L/N-PE Technical Details Test voltage (2 sec) MTBF > 3'000'000 h acc. to MIL-HB-217 F Impulse Withstand Voltage > 2.5 kV between L-N (CX2) > 4 kV between L-N (CX1) > 5 kV between L/N-PE (Cy2) voltage (1.2/50 μs) Allowable Operation Tempe- -25 °C to 85 °C rature Climatic Category 25/085/21 acc. to IEC 60068-1 IP-Protection from front side IP 40 acc. to IEC 60529 Protection Class Suitable for appliances with protection class I acc. to IEC 61140 Terminal Solder, quick connect or wires (stran- ded) Panel Thickness S Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1 mm to 3 mm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 Power Entry Modules with Line Filter C20F https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: C20F Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 104884 UL Approvals UL UL File Number: E72928 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products Power Entry Modules with Line Filter C20F https://www.schurter.com /PG06 Dimensions [mm] Screw-on from front side 10.7 6.3 x 0.8 * 3.5/M3 R6 9.4 R3 +0.20 30 64.65 3.85 26.8 0 79.2 * Solder terminal: identical outer dimensions Screw-on mounting from rear side with metal flange 3 10.7 6.3 x 0.8 * 3.5 R 6 9.4 R 0.5 max. R 0.5 +0.20 28 64.65 3.85 28.3 0 30 79.2 Snap-in mounting from front side 10.7 9.4 R2 R3 +0.20 30 64.65 3.85 26.3 0 79.2 EMC Products 3 36 42 42 53 38 53 33.90 x 25.90 33.90 33.90 x 25.90 x 25.85 3.5 ø 6.3x95° M 3 +0.20 +0.20 34.8 34.8 +0.20 0 0 36.4 0 ±0.15 ±0.15 42 42 Power Entry Modules with Line Filter C20F https://www.schurter.com /PG06 Screw-on mounting from front side with flexible wire ±2 7 +10 150 0 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 16 Standard Version 2 x 0.3 100 2.2 1 16 Medical Version (M5) 2 x 0.3 100 - 1 16 Medical Version (M80) 2 x 0.3 100 0.47 1 Diagrams Standard or medical version (M80) Medical version (M5) L L’ L L’ L1 L1 Cy 1) R 2) 1) R 2) PE PE’ PE PE’ Cx Cx L2 L2 Cy N N’ N N’ 1) Line 1) Line 2) Load 2) Load - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 20 A 4 EMC Products Power Entry Modules with Line Filter C20F https://www.schurter.com /PG06 Medical version (M5) 20 A All Variants Rated Current Rated Current Filter-Type Panel mounting Mounting side Terminal Capacitor V-Lock Order Number IEC UL 16 20 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 X2 100nF C20F.0111 █ mm 16 20 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 X1 100nF C20F.0113 mm █ 16 20 Standard Version Snap-in Front Side Solder terminals X2 100nF C20F.0011 16 20 Standard Version Snap-in Front Side Solder terminals X1 100nF C20F.0013 l 16 20 Standard Version Screw Front Side Quick connect terminals 6.3 x 0.8 X2 100nF C20F.0101 █ mm 16 20 Standard Version Screw Front Side Quick connect terminals 6.3 x 0.8 X1 100nF l C20F.0103 mm 16 20 Standard Version Screw Front Side Solder terminals X2 100nF l C20F.0001 █ 16 20 Standard Version Screw Front Side Solder terminals X1 100nF l C20F.0003 16 20 Standard Version Screw Rear Side Flexible wire AWG14 X2 100nF C20F.0221 16 20 Standard Version Screw Rear Side Flexible wire AWG14 X1 100nF C20F.0223 16 20 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 X2 100nF C20F.0121 mm 16 20 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 X1 100nF C20F.0123 mm 16 20 Standard Version Screw Rear Side Solder terminals X2 100nF C20F.0021 16 20 Standard Version Screw Rear Side Solder terminals X1 100nF C20F.0023 16 20 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 X2 100nF C20F.0112 mm 16 20 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 X1 100nF C20F.0114 mm 16 20 Medical Version (M5) Snap-in Front Side Solder terminals X2 100nF C20F.0012 16 20 Medical Version (M5) Snap-in Front Side Solder terminals X1 100nF C20F.0014 16 20 Medical Version (M5) Screw Front Side Quick connect terminals 6.3 x 0.8 X2 100nF l C20F.0102 mm 16 20 Medical Version (M5) Screw Front Side Quick connect terminals 6.3 x 0.8 X1 100nF l C20F.0104 mm l █ 16 20 Medical Version (M5) Screw Front Side Solder terminals X2 100nF C20F.0002 16 20 Medical Version (M5) Screw Front Side Solder terminals X1 100nF l C20F.0004 16 20 Medical Version (M5) Screw Rear Side Flexible wire AWG14 X2 100nF C20F.0222 16 20 Medical Version (M5) Screw Rear Side Flexible wire AWG14 X1 100nF C20F.0224 16 20 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 X2 100nF C20F.0122 mm 16 20 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 X1 100nF C20F.0124 mm 16 20 Medical Version (M5) Screw Rear Side Solder terminals X2 100nF C20F.0022 16 20 Medical Version (M5) Screw Rear Side Solder terminals X1 100nF C20F.0024 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Wire length: 150 mm EMC Products 5 Power Entry Modules with Line Filter C20F https://www.schurter.com /PG06 Packaging unit 20 Pcs Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0047 Cord retaining kits Cord retaining strain relief Countersunk, K 4700.0010 Flat head, L 4700.0011 Mating Outlets/Connectors Category / Description Connector Overview complete IEC Connector C19, Rewireable, Straight 4795 IEC Connector C19, Rewireable, Angled 4790 IEC Connector C19, Rewireable, Straight 0104U Connector further types to C20F Mating Outlets/Connectors shuttered Power Cord Overview complete Overview Power Cord with IEC Appliance Connector C19, V-Lock, straight VAC19KS Power Cord further types to C20F The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 EMC Products to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 29.05.2018