Power Entry Modules with Line Filter DC12 https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Line Switch 1- or 2-pole, Front or Rear Side Mounting Screw-on Version Snap-in version Screw-on Version from front side from front side from front side, protection class II C14 C18 See below: Approvals and Compliances 70° C 70° C Description Characteristics - Panel Mount : - Compact design with optimal shielding Screw-on version from front or rear side, snap-in version from front Rear side mounting for efficient costsaving assembly - All single elements are already wired side - Line switch non-illuminated or illuminated - 3 Functions : - Universal line filter for standard applications Appliance Inlet protection class I or II , Line Switch 1- or 2-pole , Line - Ideal for application with high transient loads filter in standard and medical version - Suitable for use in equipment according to IEC/UL 60950 - Quick connect terminals 6.3 x 0.8 mm Suitable for use in medical equipment according to IEC/UL 60601-1 Unique Selling Proposition Other versions on request - Compact power entry module - Solder terminals - Available in white or black - Other rocker marking - Switch for high inrush current - Capacitance CX1 - V-Lock cord retaining References Alternative: version without line filter DC11 Substitute for type KFB1; KFB2 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I or II medical < 5 µA (250 V / 60 Hz) Line Switch Rocker switch 1 or 2 pole, non-illumina- Dielectric Strength > 1.7 kVDC between L-N ted or illuminated, acc. to IEC 61058-1 > 2.7 kVDC between L/N-PE Technical Details Test voltage (2 sec) Line Filter Standard and Medical Version, IEC Allowable Operation Tempe- -25 °C to 85 °C 60939, UL 1283, CSA C22.2 no. 8 rature Technical Details Climatic Category 25/085/21 acc. to IEC 60068-1 MTBF > 1'900'000 h acc. to MIL-HB-217 F IP-Protection from front side IP 40 acc. to IEC 60529 Protection Class Suitable for appliances with protection class I or II acc. to IEC 61140 Terminal Quick connect terminals 6.3 x 0.8 mm Panel Thickness S Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1 mm to 3 mm Material: Housing Thermoplastic, black / white, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 Power Entry Modules with Line Filter DC12 https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DC12 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40001522 UL Approvals UL UL File Number: E72928 CQC Approvals CQC CCC Certificate Number: CQC14001117747 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products Power Entry Modules with Line Filter DC12 https://www.schurter.com /PG06 Dimensions [mm] Screw-on mounting from front side ±0.15 3 R 4 27.2 R 2.5 36 R 6 ±0.10 R 3.0 36 9.5 46 5 29.1 44.3 60.5 Screw-On Version from rear side (metal flange) ±0.15 27.2 2.2 36 R 5 R 2.5 ±0.10 30 R 4 9.5 46.8 4.2 30.4 R 4 36 60.5 44.3 Snap-in mounting from front side R 4 27.2 3 R 2.5 +0.10 - 0.05 30 9.5 46 5 29.4 R 3.0 R 5.5 32.5 60.5 EMC Products 3 R 4 34 M 3 6.3x90° 36.5 3.2 9.5 9.5 2.65 31.2 2.65 31.2 1.6 31.2 34 36.5 34.4 32.6 32.70 32.70 x28.5 x28.5 x28.5 3.6/M3 3.6 ±0.10 33.1 ±0.10 33.1 ±0.10 34.4 Power Entry Modules with Line Filter DC12 https://www.schurter.com /PG06 Screw-on mounting from front side (protection class II) ±0.15 3 R 4 27.2 R 2.5 36 R 6 ±0.10 R 3.0 36 8 46 5 29.1 44.3 59 Screw-on version from rear side (protection class II) ±0.15 27.2 2.2 36 R 5 R 2.5 ±0.10 30 R 4 8 46.8 4.2 30.4 R 4 36 59 44.3 Snap-in mounting from front side (protection class II) R 4 27.2 3 R 2.5 +0.10 - 0.05 30 8 46 5 29.4 R 3.0 R 5.5 32.5 59 4 EMC Products R 4 34 M 3 6.3x90° 36.5 3.2 9.5 9.5 2.65 31.2 2.65 31.2 1.6 31.2 34 36.5 34.4 32.6 32.70 32.70 x28.5 x28.5 x28.5 3.6/M3 3.6 ±0.10 33.1 ±0.10 33.1 ±0.10 34.4 Power Entry Modules with Line Filter DC12 https://www.schurter.com /PG06 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard Version 2 x 10 100 2.2 1 2 Standard Version 2 x 4 100 2.2 1 4 Standard Version 2 x 1.5 100 2.2 1 6 Standard Version 2 x 0.8 100 2.2 1 10 Standard Version 2 x 0.3 100 2.2 1 1 Medical Version (M5) 2 x 10 100 - 1 2 Medical Version (M5) 2 x 4 100 - 1 4 Medical Version (M5) 2 x 1.5 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 10 Medical Version (M5) 2 x 0.3 100 - 1 1 Medical Version (M80) 2 x 10 100 0.47 1 2 Medical Version (M80) 2 x 4 100 0.47 1 4 Medical Version (M80) 2 x 1.5 100 0.47 1 6 Medical Version (M80) 2 x 0.8 100 0.47 1 10 Medical Version (M80) 2 x 0.3 100 0.47 1 EMC Products 5 Power Entry Modules with Line Filter DC12 https://www.schurter.com /PG06 Diagrams Standard filter 1-pole Standard filter 2-pole L L’ L L’ L1 L1 1) 2) 1) 2) Cy Cy R R PE PE’ PE PE’ Cx Cx L2 L2 Cy Cy N N’ N N’ 1) Line 1) Line 2) Load 2) Load Medical filter 1-pole (M5) Medical filter 2-pole (M5) L L’ L L’ L1 L1 1) 2) 1) 2) R R PE PE’ PE PE’ Cx Cx L2 L2 N N’ N N’ 1) Line 1) Line 2) Load 2) Load Standard filter 2-pole Medical Filter 2-pole (M5) illuminated illuminated L L’ L L’ L1 L1 1) 2) 1) 2) Cy PE PE’ PE PE’ Cx Cx L2 L2 Cy N N’ N N’ 1) Line 1) Line 2) Load 2) Load Medical filter 2-pole (M5) protection class II L L’ L1 1) 2) R Cx L2 N N’ 1) Line 2) Load 6 EMC Products Power Entry Modules with Line Filter DC12 https://www.schurter.com /PG06 - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 1 A 2 A 4 A 6 A 10 A Medical version (M5) 1 A 2 A 4 A 6 A 10 A All Variants Rated current Filter-Type Panel mounting Mounting side Line Switch Illumination Color Pro- V-Lock Order Number tection 1 Standard Version Snap-in Front Side 1-pole non-illuminated black I l DC12.1102.103 2 Standard Version Snap-in Front Side 1-pole non-illuminated black I l DC12.2102.103 4 Standard Version Snap-in Front Side 1-pole non-illuminated black I l DC12.3102.103 6 Standard Version Snap-in Front Side 1-pole non-illuminated black I l DC12.4102.103 10 Standard Version Snap-in Front Side 1-pole non-illuminated black I l DC12.5102.103 1 Standard Version Snap-in Front Side 2-pole non-illuminated black I l DC12.1102.101 2 Standard Version Snap-in Front Side 2-pole non-illuminated black I l DC12.2102.101 █ █ 4 Standard Version Snap-in Front Side 2-pole non-illuminated black I l DC12.3102.101 l █ 6 Standard Version Snap-in Front Side 2-pole non-illuminated black I DC12.4102.101 10 Standard Version Snap-in Front Side 2-pole non-illuminated black I l DC12.5102.101 █ 1 Standard Version Screw Front Side 1-pole non-illuminated black I l DC12.1102.003 2 Standard Version Screw Front Side 1-pole non-illuminated black I l DC12.2102.003 4 Standard Version Screw Front Side 1-pole non-illuminated black I l DC12.3102.003 6 Standard Version Screw Front Side 1-pole non-illuminated black I l DC12.4102.003 █ EMC Products 7 Power Entry Modules with Line Filter DC12 https://www.schurter.com /PG06 Rated current Filter-Type Panel mounting Mounting side Line Switch Illumination Color Pro- V-Lock Order Number tection █ 10 Standard Version Screw Front Side 1-pole non-illuminated black I l DC12.5102.003 1 Standard Version Screw Front Side 2-pole non-illuminated black I l DC12.1102.001 █ 2 Standard Version Screw Front Side 2-pole non-illuminated black I l DC12.2102.001 █ 4 Standard Version Screw Front Side 2-pole non-illuminated black I l DC12.3102.001 █ █ 6 Standard Version Screw Front Side 2-pole non-illuminated black I l DC12.4102.001 l █ 10 Standard Version Screw Front Side 2-pole non-illuminated black I DC12.5102.001 1 Standard Version Screw Rear Side 1-pole non-illuminated black I l DC12.1102.203 2 Standard Version Screw Rear Side 1-pole non-illuminated black I l DC12.2102.203 4 Standard Version Screw Rear Side 1-pole non-illuminated black I l DC12.3102.203 6 Standard Version Screw Rear Side 1-pole non-illuminated black I l DC12.4102.203 l 10 Standard Version Screw Rear Side 1-pole non-illuminated black I DC12.5102.203 1 Standard Version Screw Rear Side 2-pole non-illuminated black I l DC12.1102.201 2 Standard Version Screw Rear Side 2-pole non-illuminated black I l DC12.2102.201 4 Standard Version Screw Rear Side 2-pole non-illuminated black I l DC12.3102.201 6 Standard Version Screw Rear Side 2-pole non-illuminated black I l DC12.4102.201 10 Standard Version Screw Rear Side 2-pole non-illuminated black I l DC12.5102.201 1 Medical Version (M5) Snap-in Front Side 1-pole non-illuminated black I l DC12.1202.103 2 Medical Version (M5) Snap-in Front Side 1-pole non-illuminated black I l DC12.2202.103 4 Medical Version (M5) Snap-in Front Side 1-pole non-illuminated black I l DC12.3202.103 6 Medical Version (M5) Snap-in Front Side 1-pole non-illuminated black I l DC12.4202.103 10 Medical Version (M5) Snap-in Front Side 1-pole non-illuminated black I l DC12.5202.103 1 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black I l DC12.1202.101 1 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black II l DC12.1202.121 1 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated white II l DC12.1202.131 l 2 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black I DC12.2202.101 2 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black II l DC12.2202.121 2 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated white II l DC12.2202.131 4 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black I l DC12.3202.101 4 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black II l DC12.3202.121 4 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated white II l DC12.3202.131 6 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black I l DC12.4202.101 6 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black II l DC12.4202.121 6 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated white II l DC12.4202.131 10 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black I l DC12.5202.101 10 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black II l DC12.5202.121 10 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated white II l DC12.5202.131 6 Medical Version (M5) Snap-in Front Side 2-pole illuminated green black I l DC12.4232.101 1 Medical Version (M5) Screw Front Side 1-pole non-illuminated black I l DC12.1202.003 2 Medical Version (M5) Screw Front Side 1-pole non-illuminated black I l DC12.2202.003 4 Medical Version (M5) Screw Front Side 1-pole non-illuminated black I l DC12.3202.003 6 Medical Version (M5) Screw Front Side 1-pole non-illuminated black I l DC12.4202.003 10 Medical Version (M5) Screw Front Side 1-pole non-illuminated black I l DC12.5202.003 1 Medical Version (M5) Screw Front Side 2-pole non-illuminated black I l DC12.1202.001 1 Medical Version (M5) Screw Front Side 2-pole non-illuminated black II l DC12.1202.021 1 Medical Version (M5) Screw Front Side 2-pole non-illuminated white II l DC12.1202.031 2 Medical Version (M5) Screw Front Side 2-pole non-illuminated black I l DC12.2202.001 2 Medical Version (M5) Screw Front Side 2-pole non-illuminated black II l DC12.2202.021 2 Medical Version (M5) Screw Front Side 2-pole non-illuminated white II l DC12.2202.031 8 EMC Products Power Entry Modules with Line Filter DC12 https://www.schurter.com /PG06 Rated current Filter-Type Panel mounting Mounting side Line Switch Illumination Color Pro- V-Lock Order Number tection 4 Medical Version (M5) Screw Front Side 2-pole non-illuminated black I l DC12.3202.001 4 Medical Version (M5) Screw Front Side 2-pole non-illuminated black II l DC12.3202.021 4 Medical Version (M5) Screw Front Side 2-pole non-illuminated white II l DC12.3202.031 6 Medical Version (M5) Screw Front Side 2-pole non-illuminated black I l DC12.4202.001 6 Medical Version (M5) Screw Front Side 2-pole non-illuminated black II l DC12.4202.021 6 Medical Version (M5) Screw Front Side 2-pole non-illuminated white II l DC12.4202.031 10 Medical Version (M5) Screw Front Side 2-pole non-illuminated black I l DC12.5202.001 10 Medical Version (M5) Screw Front Side 2-pole non-illuminated black II l DC12.5202.021 10 Medical Version (M5) Screw Front Side 2-pole non-illuminated white II l DC12.5202.031 1 Medical Version (M5) Screw Rear Side 2-pole non-illuminated black I l DC12.1202.201 2 Medical Version (M5) Screw Rear Side 2-pole non-illuminated black I l DC12.2202.201 l 4 Medical Version (M5) Screw Rear Side 2-pole non-illuminated black I DC12.3202.201 l 6 Medical Version (M5) Screw Rear Side 2-pole non-illuminated black I DC12.4202.201 10 Medical Version (M5) Screw Rear Side 2-pole non-illuminated black I l DC12.5202.201 1 Medical Version (M80) Screw Rear Side 2-pole non-illuminated black I l DC12.1602.201 2 Medical Version (M80) Screw Rear Side 2-pole non-illuminated black I l DC12.2602.201 4 Medical Version (M80) Screw Rear Side 2-pole non-illuminated black I l DC12.3602.201 6 Medical Version (M80) Screw Rear Side 2-pole non-illuminated black I l DC12.4602.201 10 Medical Version (M80) Screw Rear Side 2-pole non-illuminated black I l DC12.5602.201 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 10 Pcs Accessories Description Wire Harness Wire harness for SCHURTER products Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, B 4700.0002 EMC Products 9 Power Entry Modules with Line Filter DC12 https://www.schurter.com /PG06 Mating Outlets/Connectors Category / Description Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to DC12 ... Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214 Interconnection Cord further types to DC12 Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.0 m, Connector IEC C13, H05VV-F3G0.75, black 6004.0114 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, Europlug, Black, 2.5 m, H05VV-F 3G1,0mm2, Connector IEC C13, 002500 mm, H05VV-F3G1.0, black 6004.0225 Cord Sets 10 A, diverse, Black, 5.0 m, H05VV-F 3G1,0mm2, Connector IEC C13, 002500 mm, H05VV-F3G1.0, black 6052.0026 Power Supply Cord further types to DC12 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to DC12 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 10 EMC Products to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 26.01.2018