SCHURTER DC22.2121.111

Power Entry Modules with Line Filter DC22 https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Line Switch 1- or 2-pole, PCB Mounting C14 Approvals and Compliances 70° C Description Characteristics - Panel Mount : - Ultra-compact design Screw-on mounting on PCB from rear-side - All single elements are already wired - Line switch non-illuminated or illuminated - 3 Functions : - With EMC-shield Appliance Inlet Protection class I , Line Switch 1- or 2-pole , Line filter - Especially suitable for use in switching power supplies in standard and medical version Ideal for application with high transient loads - For PCB mounting - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 Other versions on request - Fixing on PCB with self-tapping screws 3 mm or pre-inserted nuts M3 - Other rocker marking - Illuminated green - Medical version M80 - Capacitance CX1 References Alternative: version without line filter DC21 Alternative: Standard version DC21 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 498 CSA C22.2 no. 42 (for cold Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I medical < 5 µA (250 V / 60 Hz) Line Switch Rocker switch 1 or 2 pole, non-illumi- Dielectric Strength > 1.7 kVDC between L-N nated or illuminated red, acc. to IEC > 2.7 kVDC between L/N-PE 61058-1 Test voltage (2 sec) Technical Details Allowable Operation Tempe- -25 °C to 85 °C Line Filter Standard and Medical Version, IEC rature 60939, UL 1283, CSA C22.2 no. 8 Climatic Category 25/085/21 acc. to IEC 60068-1 Technical Details IP-Protection from front side IP 40 acc. to IEC 60529 MTBF > 2'100'000 h acc. to MIL-HB-217 F Protection Class Suitable for appliances with protection class I acc. to IEC 61140 Terminal For PCB mounting ; Ground terminal: Quick connect terminals 6.3 x 0.8 mm angled to pin axis Panel Thickness S Screw: max 4 mm Mounting screw torque max 0.5 Nm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances EMC Products 1 Power Entry Modules with Line Filter DC22 https://www.schurter.com /PG06 Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DC22 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40001522 UL Approvals UL UL File Number: E72928 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products R4.4 Power Entry Modules with Line Filter DC22 https://www.schurter.com /PG06 Dimension [mm] Screw-on mounting 46.8 57.6 39 5.8 47.6 4.2 2.2 R 4 30 R 5.1 ±0.05 R4.2 NPEL 1) ±0.10 32.7 0.85 30.4 4.3 1.25 ±0.15 8.1 39 47.05 16.2 1) all pins ±0.10 6.05 38 2) L ±0.20 32.7 3.4 PE N 28.4 1.6 1.6 3.6 2) PE additionally as quick-connect terminal 6.3 x 0.8 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard Version 2 x 10 100 2.2 1 2 Standard Version 2 x 4 100 2.2 1 4 Standard Version 2 x 1.5 100 2.2 1 6 Standard Version 2 x 0.8 100 2.2 1 10 Standard Version 2 x 0.3 100 2.2 1 1 Medical Version (M5) 2 x 10 100 - 1 2 Medical Version (M5) 2 x 4 100 - 1 4 Medical Version (M5) 2 x 1.5 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 10 Medical Version (M5) 2 x 0.3 100 - 1 EMC Products 3 +0.10 0 +0.10 0 19.5 6.05 2.5 34 4.5 37.6 3.95 10.5 41 6.6 ±0.20 38 2.8 ±0.15 16.2 32.5 3.6 ±0.10 34.4 Power Entry Modules with Line Filter DC22 https://www.schurter.com /PG06 Diagrams Standard filter 1-pole Standard filter 2-pole L L’ L L’ L1 L1 1) 2) 1) 2) Cy Cy R R PE PE’ PE PE’ Cx Cx L2 L2 Cy Cy N N’ N N’ 1) Line 1) Line 2) Load 2) Load Medical filter 1-pole (M5) Medical filter 2-pole (M5) L L’ L L’ L1 L1 1) 2) 1) 2) R R PE PE’ PE PE’ Cx Cx L2 L2 N N’ N N’ 1) Line 1) Line 2) Load 2) Load Standard filter 2-pole Medical Filter 2-pole (M5) illuminated illuminated L L’ L L’ L1 L1 1) 2) 1) 2) Cy PE PE’ PE PE’ Cx Cx L2 L2 Cy N N’ N N’ 1) Line 1) Line 2) Load 2) Load 4 EMC Products Power Entry Modules with Line Filter DC22 https://www.schurter.com /PG06 - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 1 A 2 A 4 A 6 A 10 A Medical version (M5) 1 A 2 A 4 A 6 A 10 A All Variants Rated current Filter-Type Line Switch Illumination Color V-Lock 1 Standard Version 1-pole - 1 2 Standard Version 1-pole - 1 4 Standard Version 1-pole - 1 6 Standard Version 1-pole - 1 10 Standard Version 1-pole - 1 1 Standard Version 2-pole - 1 2 Standard Version 2-pole - 1 4 Standard Version 2-pole - 1 6 Standard Version 2-pole - 1 10 Standard Version 2-pole - 1 1 Standard Version 2-pole l red 1 2 Standard Version 2-pole l red 1 4 Standard Version 2-pole l red 1 6 Standard Version 2-pole l red 1 10 Standard Version 2-pole l red 1 EMC Products 5 Power Entry Modules with Line Filter DC22 https://www.schurter.com /PG06 Rated current Filter-Type Line Switch Illumination Color V-Lock 1 Medical Version (M5) 2-pole - 1 2 Medical Version (M5) 2-pole - 1 4 Medical Version (M5) 2-pole - 1 6 Medical Version (M5) 2-pole - 1 10 Medical Version (M5) 2-pole - 1 l 1 Medical Version (M5) 2-pole red 1 2 Medical Version (M5) 2-pole l red 1 4 Medical Version (M5) 2-pole l red 1 6 Medical Version (M5) 2-pole l red 1 l 10 Medical Version (M5) 2-pole red 1 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 10 Pcs Packaging unit Accessories Description Cord retaining kits Cord retaining strain relief Flat head, H 4700.0008 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to DC22 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to DC22 ... 6 EMC Products Power Entry Modules with Line Filter DC22 https://www.schurter.com /PG06 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power Cord further types to DC22 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed EMC Products 7 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 02.12.2017