SCHURTER DD22.2121.1111

Power Entry Modules with Line Filter DD22 https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole, Line Switch 2-pole, for PCB Mounting Order required accessories separately C14 Approvals and Compliances 70° C Description Characteristics - Panel Mount : - Ultra-compact design. Ideal for low profile designs Screw-on mounting on PCB , from rear-side - All single elements are already wired - For added safety "Extra-Safe" fuse drawers are available - 4 Functions : - Ideal for application with high transient loads Appliance Inlet Protection class I , Line Switch 2-pole , Fuseholder for - Suitable for use in equipment according to IEC/UL 60950 fuse-links 5 x 20 mm 1- or 2-pole , Line filter in standard and medical Suitable for use in medical equipment according to IEC/UL 60601-1 version - V-Lock notch standard Other versions on request - PCB terminals - Fuse drawer 1-pole, plus spare fuse case - Fuse drawer 2-pole, with shorting bar Unique Selling Proposition - Other rocker marking - Most compact power entry module - Line switch, illuminated - Attractive flat design - Line switch 1-pole - Switch for highest inrush current - Medical version M80 - V-Lock cord retaining - Protection class II, 70°C References Alternative: version without line filter DD21 Alternative: Standard version Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Technical Data Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1 UL 498 CSA C22.2 no. 42 (for cold Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 250 VAC; 50/60 Hz conditions) pin-temperature 70 °C, 10 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I medical < 5 µA (250 V / 60 Hz) Fuseholder 1 or 2 pole, Shocksafe category PC2 Dielectric Strength > 1.7 kVDC between L-N acc. to IEC 60127-6, > 2.7 kVDC between L/N-PE for fuse-links 5 x 20 mm Test voltage (1 min/50 Hz) Rated Power Acceptance @ 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per Allowable Operation Tempe- -25 °C to 85 °C Ta 23 °C pole rature Power Acceptance @ Ta > Admissible power acceptance at higher Climatic Category 25/085/21 acc. to IEC 60068-1 23°C ambient temperature see derating cur- IP-Protection from front side IP 40 acc. to IEC 60529 ves Protection Class Suitable for appliances with protection Line Switch Rocker switch 2-pole, non-illuminated, class I acc. to IEC 61140 acc. to IEC 61058-1 Terminal For PCB mounting 3 mm additional Technical Details quick connect 6.3 x 0.8 mm Line Filter Standard and Medical Version, IEC Panel Thickness S Screw-on mounting: max 3 mm 60939, UL 1283, CSA C22.2 no. 8 Mounting screw torque max 0.5 Nm Technical Details Material: Housing Thermoplastic, black, UL 94V-0 MTBF > 2'000'000 h acc. to MIL-HB-217 F Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 Power Entry Modules with Line Filter DD22 https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DD22 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40001522 UL Approvals UL UL File Number: E72928 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products R 4.4 +0.10 0 +0.10 0 1.6 1.6 3.6 3.6 Power Entry Modules with Line Filter DD22 https://www.schurter.com /PG06 Dimension [mm] Screw version 66.3 60.9 49.2 9.8 47.6 3.5 11.55 0.85 1) ±0.10 3.55 30.8 16.25 49.6 ±0.15 11.5 14.75 58.5 58.5 ±0.20 30.8 ±0.1 57.5 6.05 2) 6.2 48 1) all terminals with 1.25 x 0.8 2) Quick connect terminal 6.3 x 0.8 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard Version 2 x 10 100 2.2 1 2 Standard Version 2 x 4 100 2.2 1 4 Standard Version 2 x 1.5 100 2.2 1 6 Standard Version 2 x 0.8 100 2.2 1 10 Standard Version 2 x 0.3 100 2.2 1 1 Medical Version (M5) 2 x 10 100 - 1 2 Medical Version (M5) 2 x 4 100 - 1 4 Medical Version (M5) 2 x 1.5 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 10 Medical Version (M5) 2 x 0.3 100 - 1 EMC Products 3 +0.10 1.6 0 3.4 R 4.35 3.4 ±0.05 R 4.5 3.6 4.5 17 2.15 29.7 33 2.8 41 6.6 31.5 ±0.2 ±0.15 ±0.15 ±0.10 30.1 ±0.1 57.5 11.5 14.75 3.55 Power Entry Modules with Line Filter DD22 https://www.schurter.com /PG06 Diagrams Filter Standard Filter Medical M5 non-illuminated non-illuminated PE” PE” L L’ L L’ L1 L1 F1 F1 1) 2) 1) 2) Cy S R S R PE PE PE’ PE’ Cx Cx L2 L2 F2 F2 Cy Cy N N’ N N’ 1) Line 1) Line 2) Load 2) Load Derating Curves 1-pole 2-pole 2.0 1.6 1.4 1.5 1.2 I = 1.0 In I = 1.0 In 1.0 I = 0.7 I I = 0.7 I n n 1.0 0.8 I = << I I = << I n n 0.6 0.4 0.5 0.2 0.0 0.0 020406080 100 020406080 100 Ambient air temperature T °C Ambient air temperature T °C a a - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 1 A 2 A 4 A 6 A 10 A 4 EMC Products Admissible power acceptance in Watt Admissible power acceptance in Watt Power Entry Modules with Line Filter DD22 https://www.schurter.com /PG06 Medical version (M5) 1 A 2 A 4 A 6 A 10 A All Variants Rated Current Filter-Type Fuseholder Line Switch Illumination Order Number [A] 1 Standard Version 1-pole 2-pole non-illuminated DD22.1111.1111 █ 2 Standard Version 1-pole 2-pole non-illuminated DD22.2111.1111 4 Standard Version 1-pole 2-pole non-illuminated DD22.4111.1111 6 Standard Version 1-pole 2-pole non-illuminated DD22.6111.1111 10 Standard Version 1-pole 2-pole non-illuminated DD22.9111.1111 1 Standard Version 2-pole 2-pole non-illuminated DD22.1121.1111 █ 2 Standard Version 2-pole 2-pole non-illuminated DD22.2121.1111 4 Standard Version 2-pole 2-pole non-illuminated DD22.4121.1111 6 Standard Version 2-pole 2-pole non-illuminated DD22.6121.1111 10 Standard Version 2-pole 2-pole non-illuminated DD22.9121.1111 █ 1 Medical Version (M5) 2-pole 2-pole non-illuminated DD22.1321.1111 2 Medical Version (M5) 2-pole 2-pole non-illuminated DD22.2321.1111 4 Medical Version (M5) 2-pole 2-pole non-illuminated DD22.4321.1111 █ 6 Medical Version (M5) 2-pole 2-pole non-illuminated DD22.6321.1111 10 Medical Version (M5) 2-pole 2-pole non-illuminated DD22.9321.1111 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 20 Pcs Packaging unit Required Accessory Description Fusedrawer 2 Fusedrawer für Fuse Links 5x20 mm, with or without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... EMC Products 5 Power Entry Modules with Line Filter DD22 https://www.schurter.com /PG06 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to DD22 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to DD22 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power Cord further types to DD22 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 EMC Products to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 02.12.2017