Power entry modules without line filter DF11 https://www.schurter.com /PG05 IEC Appliance Inlet C14 or C18 with recessed Circuit Breaker TA45 C14 C18 See below: Approvals and Compliances 70° C 70° C Description Characteristics - Panel Mount : - All single elements are already wired Screw-on version from front or rear side, snap-in version from front - Circuit Breaker non-illuminated or illuminated - Suitable for use in equipment according to IEC/UL 60950 side - 2 Functions : Other versions on request Appliance Inlet protection class I or II , circuit breaker type TA45 2-pole - Unwired versions - Quick connect terminals 6.3 x 0.8 mm - Other rocker marking - Variant with notch for V-Lock mating Cordsets References Alternative: version with line filter DF12 Substitute for type 6145 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 Ratings UL/CSA 15 A / 250 VAC; 60 Hz (for cold conditions) pin-temperature 70 Dielectric Strength > 2.5 kVAC between L-N °C, 10 A, Protection Class I or II > 3 kVAC between L/N-PE Circuit Breakers Acc. IEC/EN 60934, UL 1077, CSA (1 min/50 Hz) 22.2 no. 235 Allowable Operation Tempe- -10 °C to 55 °C 2-pole rocker switch, illuminated or non- rature illuminated. Optional with undervoltage- IP-Protection from front side IP 40 acc. to IEC 60529 or remote trip release Insulation cover Suitable for appliances with protection Short circuit capacity Icn: class I or II acc. to IEC 61140 at In < 3A/240VAC : 10 x In Terminal Quick connect terminals 6.3 x 0.8 mm at In ≥ 3A/240VAC : 300A Panel Thickness S Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1/1.5/2/2.5/3 mm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Connectors 1 Power entry modules without line filter DF11 https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DF11 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40011305 UL Approvals UL UL File Number: E96454 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. 2 Connectors R 2.55 R 2.55 Power entry modules without line filter DF11 https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 32.5 76.7 2.3 28.7 10.6 41.7 28.2 ±0.10 29 Ø 3.3 0.8 Ø 6.4 27.9 4.8 Snap-in version 76.7 2.3 ±0.10 28.7 10.6 41.7 28.2 29 32.5 S ±0.1 27.9 4.8 * --- Version TA45 with undervoltage release Connectors 3 R 2.8 R 2.8 ±0.05 R 2.95 ±0.05 R 2.95 ø 3.6/M3 R 4.7 R 6 R 4.7 91.5 77 4.5 82.5 9.7 37.1 9.7 37.1 1.9 73.2 9.15 73.2 2.15 72.7 9.4 72.7 9.45 9.45 ±0.10 82.5 ±0.10 73.5 ±0.10 ±0.05 73.5 4.5 Power entry modules without line filter DF11 https://www.schurter.com /PG05 Diagrams 1 L' P L 1) 2) PE PE' N 2 N' P 1) Line 2) Load 4 Connectors Power entry modules without line filter DF11 https://www.schurter.com /PG05 Table 1 Selection for type TA45 ABT W F 150 C0 Order example • Circuit Breaker of Equipment • 2-pole, rocker actuated • Quick connect terminal Other types on request Diagram 1-pole 2-pole Thermal overload protection P2 P1 P2 P1 3 6 43 Without illumination ABT ABD With illumination 220…240 V A12 A32 } 110…120 V A14 A34 Colours Switch front Rocker W black white – B black black – 6 black – orange transp. Rocker legend Surface Illustration Colour of print Surface Illustration Colour of print F embossed / Relief M printed black I O H printed / bedruckt white / weiss P printed white I O K printed / bedruckt black / schwarz R printed black L printed / bedruckt white / weiss Position of the rocker legend Rated current circuit breaker of equipment e.g F I Code I Code I Code I Code n n n n 10,0 100 0,1 J01 1,3 J13 2,8 J28 11,0 110 0,2 J02 1,4 J14 3,0 030 12,0 120 0,3 J03 1,5 J15 3,5 035 13,0 130 0,4 J04 1,6 J16 4,0 040 14,0 140 0,5 J05 1,7 J17 4,5 045 15,0 150 0,6 J06 1,8 J18 5,0 050 20,0 200 0,7 J07 1,9 J19 6,0 060 0,8 J08 2,0 J20 6,5 065 0,9 J09 2,1 J21 7,0 070 1,0 J10 7,5 075 2,2 J22 1,1 J11 8,0 080 2,3 J23 1,2 J12 9,0 090 2,5 J25 Without release: code C0 Undervoltage release Remote trip release P2 P1 P2 P1 P2 P1 P2 P1 c b b a U< U< U< Rated voltage U UE ZA Code n 2 240 V AC • • • • 3 230 V AC • • • • 4 120 V AC • • • • Connectors 5 l ON ON l O OFF OFF O l O Power entry modules without line filter DF11 https://www.schurter.com /PG05 Technical data (continued) Circuit breaker Tripping characteristics Tripping characteristics I < 3 A I > _ 3… < _ 15 A n n [ min ] [ sec ] [ min ] [ sec ] 10’000 10’000 Type TA45 Type TA45 Rated current In < 3 A Rated current I n > 3... < 15 A 60 60 1-pole protected 1-pole protected 2000 2’000 30 30 2-pole protected 2-pole protected 20 20 1000 1’000 Ambient temp. +23 °C Ambient temp. +23 °C 10 10 500 500 5 5 200 200 100 100 1 1 50 50 20 20 10 10 5 5 2 2 1 1 0,5 0,5 0,3 0,3 0,2 0,2 0,1 0,1 1,05 1,32 2 3 4 5 8 10 1,05 1,32 2 3 4 5 8 10 Multiple of rated current [ x I ] Multiple of rated current [ x I ] n n 1) Effect of ambient temperature * Temperature must be measured at the rear of the breaker next The unit is calibrated for an ambient temperature of +23 °C. To to the terminals after equipment operating temperature has been deter mine the rated current for a lower or higher ambient tempera- reached. ture, use a correction factor from the table below. 1) Example * Ambient temperature [°C] Correction factor Rated current at +23 °C 6,0 A –10 0,89 Ambient temperature +40 °C – 5 0,91 Correction factor 1,08 0 0,92 Chosen rated current at +23 1,00 + 40 °C ambient temperature 6 A x 1,08 = 6,5 A +30 1,03 +40 1,08 +55 1,16 Configuratorcode (example) Optional Variants Type Order code TA 45 0 standard (2-pole rocker-switch 9 V-Lock without accessories) DF11 - ABTWF150C0 - 000 - 111 - 009 Colour see table 1 0 black Mounting 0 Screw mounting 1 Snap-in mounting s = 1.0 mm 2 Snap-in mounting s = 1.5 mm 3 Snap-in mounting s = 2.0 mm 4 Snap-in mounting s = 2.5 mm 5 Snap-in mounting s = 3.0 mm Terminal PE 0 without terminal (PCII) 1 Quick-connect terminal 6.3x0.8 mm Terminal N 1 Quick-connect terminals 6.3x0.8mm, without connection to TA45 3 connection to TA45 non insulated Terminal L 1 Quick-connect terminals 6.3x0.8mm, without connection to TA45 3 connection to TA45 non insulated 6 Connectors Tripping time Tripping time Power entry modules without line filter DF11 https://www.schurter.com /PG05 Packaging unit 20 Pcs Accessories Description Assorted Covers Rear Cover Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to DF11 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to DF11 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power Cord further types to DF11 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Connectors 7 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 03.05.2018