SCHURTER DF12.0470.7310.1

Power Entry Modules with Line Filter DF12 https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Circuit Breaker TA45 (recessed) C14 See below: Approvals and Compliances 70° C Description Characteristics - Panel Mount : - All single elements are already wired Screw-on mounting from front side - Circuit Breaker non-illuminated or illuminated - Suitable for use in equipment according to IEC/UL 60950 - 3 Functions : Suitable for use in medical equipment according to IEC/UL 60601-1 Appliance Inlet Protection class I , circuit breaker type TA45 2-pole , Line filter in standard and medical version Other versions on request - Quick connect terminals 6.3 x 0.8 mm - Unwired versions - Other rocker marking - Medical version M80 - Capacitance CX1 - Variant with notch for V-Lock mating Cordsets References Alternative: version without line filter DF11 Substitute for type 5145 Alternative: Standard version Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Technical Data Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 1 - 15 A @ Ta 40 °C / 250 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I medical < 5 µA (250 V / 60 Hz) Circuit Breakers Acc. IEC/EN 60934, UL 1077, CSA Dielectric Strength > 1.7 kVDC between L-N 22.2 no. 235 > 2.7 kVDC between L/N-PE 2-pole rocker switch, illuminated or non- Test voltage (2 sec) illuminated. Optional with undervoltage- Allowable Operation Tempe- -10 °C to 55 °C or remote trip release rature Short circuit capacity Icn: Climatic Category 10/055/21 acc. to IEC 60068-1 at In < 3A/240VAC : 10 x In IP-Protection from front side IP 40 acc. to IEC 60529 at In ≥ 3A/240VAC : 300A Protection Class Suitable for appliances with protection Line Filter Standard and Medical Version, IEC class I acc. to IEC 61140 60939, UL 1283, CSA C22.2 no. 8 Terminal Quick connect terminals 6.3 x 0.8 mm Technical Details Panel Thickness S Screw: max 8 mm MTBF > 100'000 h acc. to MIL-HB-217 F Mounting screw torque max 0.5 Nm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 Power Entry Modules with Line Filter DF12 https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DF12 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40012935 UL Approvals UL UL File Number: E72928 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products R 3.3 Power Entry Modules with Line Filter DF12 https://www.schurter.com /PG06 Dimensions [mm] Screw-on mounting 76.2 33.5 10.6 41.2 2.8 28.7 36 29.4 Ø 3.3 0.8 29.8 ±0.10 30.8 Ø 6.4 9.7 47.2 5.3 * --- Version TA45 with undervoltage release Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard 2 x 11 100 2.2 1 2 Standard 2 x 4 100 2.2 1 3 Standard 2 x 2.5 100 2.2 1 4 Standard 2 x 1.6 100 2.2 1 6 Standard 2 x 0.7 100 2.2 1 8 Standard 2 x 0.6 100 2.2 1 10 Standard 2 x 0.4 100 2.2 1 15 Standard 2 x 0.1 100 2.2 1 2 Medical (M5) 2 x 4 100 - 1 3 Medical (M5) 2 x 2.5 100 - 1 4 Medical (M5) 2 x 1.6 100 - 1 6 Medical (M5) 2 x 0.7 100 - 1 8 Medical (M5) 2 x 0.6 100 - 1 10 Medical (M5) 2 x 0.4 100 - 1 15 Medical (M5) 2 x 0.1 100 - 1 EMC Products 3 R 2.8 ±0.05 R 3.75 /M3 Ø 3.6 R 3.05 R 4.7 R 6.5 92.5 5 82.5 9.7 37.1 9.65 73.2 21.1 9.2 74.3 10.15 ±0.10 82.5 ±0.05 ±0.10 3.5 75.5 Power Entry Modules with Line Filter DF12 https://www.schurter.com /PG06 Diagrams Standard version Medical version (M5) L’ P1 L’ P1 L L L1 L1 1) 2) 1) 2) Cy PE’ R PE’ PE PE Cx Cx L2 L2 N’ P2 N’ P2 Cy N N 1) Line 1) Line 2) Load 2) Load - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 1 A 2 A 3 A 4 A 6 A 8 A 10 A 15 A Medical version (M5) 1 A 2 A 3 A 4 A 6 A 8 A 10 A 15 A 4 EMC Products TA 45 TA 45 Power Entry Modules with Line Filter DF12 https://www.schurter.com /PG06 Table 1 Selection for type TA45 ABT W F 150 C0 Order example • Circuit Breaker of Equipment • 2-pole, rocker actuated • Quick connect terminal Other types on request Diagram 1-pole 2-pole Thermal overload protection P2 P1 P2 P1 3 6 43 Without illumination ABT ABD With illumination 220…240 V A12 A32 } 110…120 V A14 A34 Colours Switch front Rocker W black white – B black black – 6 black – orange transp. Rocker legend Surface Illustration Colour of print Surface Illustration Colour of print F embossed / Relief M printed black I O H printed / bedruckt white / weiss P printed white I O K printed / bedruckt black / schwarz R printed black L printed / bedruckt white / weiss Position of the rocker legend Rated current circuit breaker of equipment e.g F I Code I Code I Code I Code n n n n 10,0 100 0,1 J01 1,3 J13 2,8 J28 11,0 110 0,2 J02 1,4 J14 3,0 030 12,0 120 0,3 J03 1,5 J15 3,5 035 13,0 130 0,4 J04 1,6 J16 4,0 040 14,0 140 0,5 J05 1,7 J17 4,5 045 15,0 150 0,6 J06 1,8 J18 5,0 050 20,0 200 0,7 J07 1,9 J19 6,0 060 0,8 J08 2,0 J20 6,5 065 0,9 J09 2,1 J21 7,0 070 1,0 J10 7,5 075 2,2 J22 1,1 J11 8,0 080 2,3 J23 1,2 J12 9,0 090 2,5 J25 Without release: code C0 Undervoltage release Remote trip release P2 P1 P2 P1 P2 P1 P2 P1 c b b a U< U< U< Rated voltage U UE ZA Code n 2 240 V AC • • • • 3 230 V AC • • • • 4 120 V AC • • • • EMC Products 5 l ON ON l O OFF OFF O l O Power Entry Modules with Line Filter DF12 https://www.schurter.com /PG06 Technical data (continued) Circuit breaker Tripping characteristics Tripping characteristics I < 3 A I > _ 3… < _ 15 A n n [ min ] [ sec ] [ min ] [ sec ] 10’000 10’000 Typ TA45 Typ TA45 Nennstrom In < 3 A Nennstrom I n > 3... < 15 A 60 60 1-polig geschützt 1-polig geschützt 2000 2’000 30 30 2-polig geschützt 2-polig geschützt 20 20 1000 1’000 Umgebungstemp. +23 °C Umgebungstemp. +23 °C 10 10 500 500 5 5 200 200 100 100 1 1 50 50 20 20 10 10 5 5 2 2 1 1 0,5 0,5 0,3 0,3 0,2 0,2 0,1 0,1 1,05 1,32 2 3 4 5 8 10 1,05 1,32 2 3 4 5 8 10 Nennstrom-Vielfaches Nennstrom-Vielfaches [ x In ] [ x In ] 1) Effect of ambient temperature * Temperature must be measured at the rear of the breaker next The unit is calibrated for an ambient temperature of +23 °C. To to the terminals after equipment operating temperature has been deter mine the rated current for a lower or higher ambient tempera- reached. ture, use a correction factor from the table below. 1) * Ambient temperature [°C] Correction factor Example –10 0,89 Rated current at +23 °C 6,0 A – 5 0,91 Ambient temperature +40 °C 0 0,92 Correction factor 1,08 +23 1,00 Chosen rated current at +30 1,03 + 40 °C ambient temperature 6 A x 1,08 = 6,5 A +40 1,08 +55 1,16 Configuration code (example) Optional Variants 00 standard Type Order code TA 45 21 V-Lock notch (2-pole rocker-switch without accessories) Colour 0 black DF12 - ABTWF150C0 - 000 - 1111 - 00 - 21 see table 1 Mounting 0 Screw mounting Terminal PE 1 QC 6.3x0.8 Terminal L and N 1 QC 6.3x0.8, without connection to TA45 3 Connection to TA45 non insulated Type of mains filter / capacitor / bleed resistor 1 standard X2, Y2 with bleed resistor 3 medical M5 X2 with bleed resistor Rated current 1) 1 1A 2 2A 3 3A 4 4A 5 6A 6 8A 7 10A 9 15A 1) The rated current of the line-filter must be equal or more than the rated current of TA45 20 Pcs Packaging unit 6 EMC Products Auslösezeit Auslösezeit Power Entry Modules with Line Filter DF12 https://www.schurter.com /PG06 Accessories Description Assorted Covers Rear Cover 0859.0109 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to DF12 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to DF12 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power Cord further types to DF12 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed EMC Products 7 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 29.05.2018