SCHURTER EF11.0035.0010.01

Power entry modules without line filter EF11 https://www.schurter.com /PG05 IEC Appliance Inlet C20 with Circuit Breaker TA45 C20 See below: Approvals and Compliances 70° C Description Characteristics - Panel Mount : - All single elements are already wired Screw-on version from front or rear side, snap-in version from front - Unwired versions available on request - Circuit Breaker non-illuminated or illuminated side - Suitable for use in equipment according to IEC/UL 60950 - 2 Functions : Appliance Inlet Protection class I , circuit breaker type TA45 2-pole Other versions on request - Quick connect terminals 6.3 x 0.8 mm - Unwired versions - Variant with notch for V-Lock mating Cordsets References Alternative: version with line filter EF12 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 16 A / 250 VAC; 50 Hz appliance inlet/-outlet C20 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 Ratings UL/CSA 20 A / 250 VAC; 60 Hz (for cold conditions) pin-temperature 70 Dielectric Strength > 1.5 kVAC between L-N °C, 16 A, Protection Class I > 3 kVAC between L/N-PE Circuit Breakers Acc. IEC/EN 60934, UL 1077, CSA (1 min/50 Hz) 22.2 no. 235 Allowable Operation Tempe- -10 °C to 55 °C 2-pole rocker switch, illuminated or non- rature illuminated. Optional with undervoltage- IP-Protection from front side IP 40 acc. to IEC 60529 or remote trip release Insulation cover Suitable for appliances with protection Short circuit capacity Icn: class I acc. to IEC 61140 at In < 3A/240VAC : 10 x In Terminal Quick connect terminals 6.3 x 0.8 mm at In ≥ 3A/240VAC : 300A Panel Thickness S Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: EF11 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40001029 UL Approvals UL UL File Number: E96454 Connectors 1 R 2.55 Power entry modules without line filter EF11 https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Dimensions [mm] Screw-on mounting 76.7 2.3 36 31.7 32.2 10.6 41.7 3.6/M3 0.8 ±0.10 ø 3.3 26.6 4.8 32.5 ø 6.4 ** --- Version TA45 with undervoltage relaese 2 Connectors R 2.8 ±0.05 R 2.95 R 4.7 R 6 100 90 5 12.2 40.55 10.4 79.2 78.7 12 ±0.10 90 ±0.05 ±0.10 5.25 79.5 R 2.55 Power entry modules without line filter EF11 https://www.schurter.com /PG05 Snap-in mounting 76.7 2.3 +0.05 10.6 41.7 - 0.10 36 31.7 32.5 32.2 S ±0.05 26.6 4.8 **--- Version TA45 with undervoltage release Diagrams 1 L' P L 1) 2) PE PE' N 2 N' P 1) Line 2) Load Connectors 3 R 2.8 ±0.05 R 2.95 R 4.7 83 12.2 40.55 79.2 78.7 12 +0.05 79.5 - 0.15 Power entry modules without line filter EF11 https://www.schurter.com /PG05 Table 1 Selection for type TA45 ABT W F 150 C0 Order example • Circuit Breaker of Equipment • 2-pole, rocker actuated • Quick connect terminal Other variants on request Diagram 1-pole 2-pole Thermal overload protection P2 P1 P2 P1 3 43 6 Without illumination ABT ABD With illumination 220…240 V A12 A32 } A14 A34 110…120 V Colours Switch front Rocker W black white – B black black – 6 black – orange transp. Rocker legend Surface Illustration Colour of print Surface Illustration Colour of print F embossed M printed black I O H printed white P printed white I O K printed black R printed black L printed white Position of the rocker legend Rated current circuit breaker of equipment e.g F I Code I Code I Code I Code n n n n 10,0 100 16,0 160 19,0 190 13,0 130 20,0 200 11,0 110 14,0 140 17,0 170 12,0 120 18,0 180 15,0 150 Other rated currents on request Without release: code C0 Undervoltage release Remote trip release P2 P1 P2 P1 P2 P1 P2 P1 b a c b U< U< U< Rated voltage U UE ZA Code n 2 240 V AC • • • • 3 230 V AC • • • • 4 120 V AC • • • • 4 Connectors 5 3 P1 a l ON ON l O OFF OFF O l O Power entry modules without line filter EF11 https://www.schurter.com /PG05 Technical data (continued) Circuit breaker Tripping characteristics Tripping characteristics Tripping characteristics I < 3 A I > 3… < 18 A I > 18 A n n n [ min ] [ sec ] [ min ] [ sec ] [ min ] [ sec ] 10'000 10'000 10'000 Type TA45 Type TA45 Type TA45 Rated current I <3 A n Rated current I > 3 A... < 18 A Rated current I > 18 A n n 60 60 60 1 pole protected 1 pole protected 1 pole protected 2`000 2`000 2`000 30 30 30 2 pole protected 2 pole protected 2 pole protected 20 20 20 1`000 1`000 1`000 Ambient temp. Ambient temp. +23 °C Ambient temp. +23 °C +23 °C 10 10 10 500 500 500 5 5 5 200 200 200 100 100 100 1 1 1 50 50 50 20 20 20 10 10 10 5 5 5 2 2 2 1 1 1 0,5 0,5 0,5 0,3 0,3 0,3 0,2 0,2 0,2 0,1 0,1 0,1 1,05 1,32 2 3 4 5 8 10 1,05 1,32 2 3 4 5 8 10 1,05 1,32 2 3 4 5 8 10 [ x In ] [ x In ] [ x In ] Multiple of rated current Multiple of rated current Multiple of rated current 1) Effect of ambient temperature * Temperature must be measured at the rear of the breaker next The unit is calibrated for an ambient tem pe rature of +23 °C. To to the terminals after equipment operating temperature has been determine the rated current for a lower or higher ambient tempera- reached. ture, use a correction factor from the table below: 1) * Ambient temperature [°C] Correction factor Example –10 0,89 Rated current at +23 °C 6,0 A – 5 0,91 Ambient temperature +40 °C 0 0,92 Correction factor 1,08 +23 1,00 Chosen rated current at +30 1,03 +40 °C ambient temperature 6 A x 1,08 = 6,5 A +40 1,08 +55 1,16 Configurtation code (example) Optional Variants Order code TA45 Type 0 standard (2-pole rocker-switch 9 V-Lock notch without accessories) Colour EF11 - ABTWF150C0 - 000 - 111 - 000 0 black see table 1 Mounting 0 Screw mounting 2 Snap-in mounting s = 1.5 3 Snap-in mounting s = 2.0 4 Snap-in mounting s = 2.5 Terminal PE 1 Quick-connect terminals 6.3x0.8mm Terminal N 1 Quick-connect terminals 6.3x0.8mm, without connection to TA45 3 connection to TA45 non insulated Terminal L 1 Quick-connect terminals 6.3x0.8mm, without connection to TA45 3 connection to TA45 non insulated Connectors 5 Tripping time Tripping time Tripping time Power entry modules without line filter EF11 https://www.schurter.com /PG05 Packaging unit 16 Pcs Accessories Description Assorted Covers Rear Cover 0859.0109 Cord retaining kits Cord retaining strain relief Flat head, H 4700.0008 Mating Outlets/Connectors Category / Description Connector Overview complete IEC Connector C19, Rewireable, Straight 4795 IEC Connector C19, Rewireable, Angled 4790 IEC Connector C19, Rewireable, Straight 0104U Connector further types to EF11 Power Supply Cord Overview complete Cord Sets 10 A, North America, 3.0 m, Connector IEC C13, SJT 3x18 AWG, Transparent 4300.0920 Cord Sets 16 A, Europlug, 2.5 m, Connector IEC C19, H05VV-F3G1.5, black 6004.0395 Cord Sets 16 A, Interconnection, 1.0 m, Connector IEC C19, H05VV-F3G1.5, black 6020.0392 Cord Sets 16 A, Interconnection, 2.0 m, Connector IEC C19, H05VV-F3G1.5, black 6020.0394 Cord Sets 16 A, North America, 2.5 m, Connector IEC C19, SJT 3x14 AWG, black 6009.5195 Power Supply Cord further types to EF11 Mating Outlets/Connectors shuttered Power Cord Overview complete Overview Power Cord with IEC Appliance Connector C19, V-Lock, straight VAC19KS Power Cord further types to EF11 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 03.05.2018