Electronics Finder Manufacturers S SCHURTER EF12.0924.1210.01
About product Specifications Datasheet FAQ

SCHURTER EF12.0924.1210.01

Image of SCHURTER EF12.0924.1210.01

Description

AC Power Entry Modules 10 A 2 Poles Prot Screw Mount W/Filter
EF12.0924.1210.01

Part Number

EF12.0924.1210.01

Price

Request Quote

Manufacturer

SCHURTER

Lead Time

Request Quote

Category

Connectors »  Power Entry Module

Specifications

Manufacturer

Schurter

Manufacturers Part #

EF12.0924.1210.01

Lead Time

10 Week Lead Time

Industry Aliases

EF12.0924.1210.01, EF12.A324L200C0.1210.01

Sub-Category

Power Entry Modules

Factory Pack Quantity

1

Datasheet

pdf file

typ_EF12.pdf

612 KiB

Extracted Text

Power Entry Modules with Line Filter EF12 https://www.schurter.com /PG06 IEC Appliance Inlet C20 with Filter, Circuit Breaker TA45 (recessed) C20 Approvals and Compliances 70° C Description Characteristics - Panel Mount : - All single elements are already wired Screw-on mounting from front side - Circuit Breaker non-illuminated or illuminated - With EMC-shield - 3 Functions : - Suitable for use in equipment according to IEC/UL 60950 Appliance Inlet Protection class I , circuit breaker type TA45 2-pole Suitable for use in medical equipment according to IEC/UL 60601-1 , Line filter in standard and medical version - Quick connect terminals 6.3 x 0.8 mm Other versions on request - Variant with notch for V-Lock mating Cordsets References Alternative: version without line filter EF11 Alternative: Standard version Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Technical Data Ratings IEC 12 - 16 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C20 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 12 - 20 A @ Ta 40 °C / 250 VAC; 60 Hz conditions) pin-temperature 70 °C, 16 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I medical < 5 µA (250 V / 60 Hz) Circuit Breakers Acc. IEC/EN 60934, UL 1077, CSA Dielectric Strength > 1.7 kVDC between L-N 22.2 no. 235 > 2.7 kVDC between L/N-PE 2-pole rocker switch, illuminated or non- Test voltage (2 sec) illuminated. Optional with undervoltage- Allowable Operation Tempe- -10 °C to 55 °C or remote trip release rature Short circuit capacity Icn: Climatic Category 10/055/21 acc. to IEC 60068-1 at In < 3A/240VAC : 10 x In IP-Protection from front side IP 40 acc. to IEC 60529 at In ≥ 3A/240VAC : 300A Protection Class Suitable for appliances with protection Line Filter Standard and Medical Version, IEC class I acc. to IEC 61140 60939, UL 1283, CSA C22.2 no. 8 Terminal Quick connect terminals 6.3 x 0.8 mm Technical Details Panel Thickness S Screw: max 8 mm MTBF > 100'000 h acc. to MIL-HB-217 F Mounting screw torque max 0.5 Nm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: EF12 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40001520 UL Approvals UL UL File Number: E72928 EMC Products 1 Power Entry Modules with Line Filter EF12 https://www.schurter.com /PG06 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products R 3.05 Power Entry Modules with Line Filter EF12 https://www.schurter.com /PG06 Dimension [mm] 37 76.2 2.8 32.2 10.6 41.2 32.9 ø3.6/M3 0.8 9.5 59.5 ±0.10 ø3.3 5.3 33.9 ø6.4 * --- Version TA45 with undervoltage release Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 12 Standard Version 2 x 0.8 100 2.2 1 16 Standard Version 2 x 0.6 100 2.2 1 20 Standard Version 2 x 0.3 100 2.2 1 12 Medical Version (M5) 2 x 0.8 100 - 1 16 Medical Version (M5) 2 x 0.6 100 - 1 20 Medical Version (M5) 2 x 0.3 100 - 1 Diagrams Standard version Medical version (M5) L’ P1 L’ P1 L L L1 L1 2) 2) 1) 1) Cy R PE’ R PE’ PE PE Cx Cx L2 L2 N’ P2 N’ P2 Cy N N 1) Line 1) Line 2) Load 2) Load EMC Products 3 R 2.8 ±0.05 R 3.55 R 4.7 R 6.5 101 5.5 90 12.2 40.55 10.9 79.2 TA 45 80.05 12.6 ±0.10 90 TA 45 ±0.05 ±0.10 4.55 81 Power Entry Modules with Line Filter EF12 https://www.schurter.com /PG06 - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 12 A 16 A 20 A Medical version (M5) 12 A 16 A 20 A 4 EMC Products Power Entry Modules with Line Filter EF12 https://www.schurter.com /PG06 Table 1 Selection for type TA45 ABT W F 150 C0 Order example • Circuit Breaker of Equipment • 2-pole, rocker actuated • Quick connect terminal Other variants on request Diagram 1-pole 2-pole Thermal overload protection P2 P1 P2 P1 3 43 6 Without illumination ABT ABD With illumination 220…240 V A12 A32 } A14 A34 110…120 V Colours Switch front Rocker W black white – B black black – 6 black – orange transp. Rocker legend Surface Illustration Colour of print Surface Illustration Colour of print F embossed M printed black I O H printed white P printed white I O K printed black R printed black L printed white Position of the rocker legend Rated current circuit breaker of equipment e.g F I Code I Code I Code I Code n n n n 10,0 100 16,0 160 19,0 190 13,0 130 20,0 200 11,0 110 14,0 140 17,0 170 12,0 120 18,0 180 15,0 150 Other rated currents on request Without release: code C0 Undervoltage release Remote trip release P2 P1 P2 P1 P2 P1 P2 P1 b a c b U< U< U< Rated voltage U UE ZA Code n 2 240 V AC • • • • 3 230 V AC • • • • 4 120 V AC • • • • EMC Products 5 5 3 a P1 l ON ON l O OFF OFF O l O Power Entry Modules with Line Filter EF12 https://www.schurter.com /PG06 Technical data (continued) Circuit breaker Tripping characteristics Tripping characteristics Tripping characteristics I < 3 A I > 3… < 18 A I > 18 A n n n [ min ] [ sec ] [ min ] [ sec ] [ min ] [ sec ] 10'000 10'000 10'000 Type TA45 Type TA45 Type TA45 Rated current I <3 A n Rated current I > 3 A... < 18 A n Rated current I > 18 A n 60 60 60 1 pole protected 1 pole protected 1 pole protected 2`000 2`000 2`000 30 30 30 2 pole protected 2 pole protected 2 pole protected 20 20 20 1`000 1`000 1`000 Ambient temp. +23 °C Ambient temp. +23 °C Ambient temp. 10 10 +23 °C 10 500 500 500 5 5 5 200 200 200 100 100 100 1 1 1 50 50 50 20 20 20 10 10 10 5 5 5 2 2 2 1 1 1 0,5 0,5 0,5 0,3 0,3 0,3 0,2 0,2 0,2 0,1 0,1 0,1 1,05 1,32 2 3 4 5 8 10 1,05 1,32 2 3 4 5 8 10 1,05 1,32 2 3 4 5 8 10 [ x I ] [ x In ] n [ x In ] Multiple of rated current Multiple of rated current Multiple of rated current 1) Effect of ambient temperature * Temperature must be measured at the rear of the breaker next The unit is calibrated for an ambient tem pe rature of +23 °C. To de- to the terminals after equipment operating temperature has been termine the rated current for a lower or higher ambient temperature, reached. use a correction factor from the table on the right side: 1) Example * Ambient temperature [°C] Correction factor Rated current at +23 °C 6,0 A –10 0,89 Ambient temperature +40 °C –5 0,91 Correction factor 1,08 0 0,92 Chosen rated current at +23 1,00 +40 °C ambient temperature 6 A x 1,08 = 6,5 A +30 1,03 +40 1,08 +55 1,16 Configuration code (example) Color Order code TA45 Type 0 black (2-pole rocker-switch without accessories) Interlocking 0 without V-Lock EF12 - ABTWF150C0 - 000 - 1111 - 00 - 00 1 with V-Lock see table 1 Terminal PE 1 QC 6.3x0.8 Terminal L and N 1 QC 6.3x0.8, without connection to TA45 3 Connection to TA45 non insulated Type of mains fi lter / capacitor / bleed resistor 1 standard X2,Y2 with bleed resistor 2 medical M5 X2 with bleed resistor Rated current 1) 1 20 A 2 16 A 3 12 A 1) The rated current of the line-fi lter must be equal or more than the rated current of TA45. 6 EMC Products Tripping time Tripping time Tripping time Power Entry Modules with Line Filter EF12 https://www.schurter.com /PG06 Packaging unit 16 Pcs Accessories Description Cord retaining kits Cord retaining strain relief Flat head, H 4700.0008 Mating Outlets/Connectors Category / Description Connector Overview complete IEC Connector C19, Rewireable, Straight 4795 IEC Connector C19, Rewireable, Angled 4790 IEC Connector C19, Rewireable, Straight 0104U Connector further types to EF12 Mating Outlets/Connectors shuttered Power Cord Overview complete Overview Power Cord with IEC Appliance Connector C19, V-Lock, straight VAC19KS Power Cord further types to EF12 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed EMC Products 7 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 02.12.2017

Frequently asked questions

How does Electronics Finder differ from its competitors?

chervon down
Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

Is there a warranty for the EF12.0924.1210.01?

chervon down
The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

Which carrier will Electronics Finder use to ship my parts?

chervon down
We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Can I buy parts from Electronics Finder if I am outside the USA?

chervon down
Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Which payment methods does Electronics Finder accept?

chervon down
Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Power Entry Module Unfiltered M 3 POS 250VAC 10A Fuse ST 1 Port 0040.5000.2

product

Power Entry Module Unfiltered M 2 POS 250VAC 10A Fuse ST 1 Port 0040.5015

product

Power Entry Module Filtered M 3 POS 250VAC 1A ST 1 Port 4300.5051

product

Power Entry Module Filtered M 3 POS 250VAC 2A ST 1 Port 4300.5052

product

Power Entry Module Filtered M 3 POS 250VAC 4A ST 1 Port 4300.5053

product

Power Entry Module Filtered M 3 POS 250VAC 6A ST 1 Port 4300.5054