SCHURTER GSF1.2002.51

Power entry modules without line filter GSF1 https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole Screw-on Version Snap-in version Pick & Place Version C14 Approvals and Compliances 70° C Description Characteristics - Panel Mount : - PCB mount with snap-in or screw-on feet Sandwich/rear-side Suitable for automatic PCB assembling - All single elements are already wired - 2 Functions : - Fuseholder on the inside of the equipment prevents accidental use of Appliance Inlet Protection class I , with or without Fuseholder for fuse- incorrect fuse-links by the user links 5 x 20 mm on the rear-side 1- or 2-pole - With or without rear-side insulation cover - Meets the requirements of IEC 60335-1 for appliances in unattended - Blister tray as optional packaging variant use. This includes the enhanced requirements of glow wire tests acc. - Suitable for use in equipment according to IEC/UL 60950 to IEC 60695-2-12 and -13. - For PCB mounting Other versions on request - Pick and place version - Ground terminal with quick-connect terminal 6,3 x 0,8 mm - Ground terminal with solder terminal - For protection class II Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 10 A / 250 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, ␣ without fuseholder 16A (UL) Protection Class I Dielectric Strength > 3 kVAC between L-N Fuseholder optional, 1 or 2 pole, Shocksafe cate- > 4 kVAC between L/N-PE gory PC2 acc. to IEC 60127-6, (1 min/50 Hz) for fuse-links 5 x 20 mm Allowable Operation Tempe- -25 °C to 70 °C Rated Power Acceptance @ 5 x 20: 3.15 W (1 pole)/ 2.5 W (2-pole) rature Ta 23 °C per pole IP-Protection from front side IP 40 acc. to IEC 60529 Power Acceptance @ Ta > Admissible power acceptance at higher Insulation cover Suitable for appliances with protection 23°C ambient temperature see derating cur- class I acc. to IEC 61140 ves Terminal For PCB mounting Panel Thickness S Snap-in: 1.5/2/2.5/3 mm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Connectors 1 Power entry modules without line filter GSF1 https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: GSF1 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40024857 UL Approvals UL UL File Number: E93617, E96454 CSA Approvals CSA CSA Certification Record: 38456 CQC Approvals CQC CCC File Number: 2006010204183182 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. 2 Connectors Power entry modules without line filter GSF1 https://www.schurter.com /PG05 Dimensions [mm] with insulation cover 19.3 6 AS max. R4.5 26.8 ±0.1 30.3 1.5 11.5 29.9 15.9 34 A = 6 mm for standard versions for mounting from rear-side A = 5 mm for pick and place versions S = 0 mm for mounting from rear-side 27 max. R2 ±0.1 27.7 27.5 A = 6 mm for standard versions for sandwich mounting A = 5 mm for pick and place versions Drilling diagrams without fuseholder with 1-pole fuseholder with 2-pole fuseholder Pick and Place versions without / with 1-pole or 18.1 9.05 12.7 25.4 2-pole fuseholder ±0.10 25.4 1.4 1.4 1.4 1.4 3.5 1.6 D1 1.6 D1 1.6 D1 1.6 5.8 1.6 27 27 27 ±0.05 ±0.05 2.3 1.6 2.3 ±0.10 26.7 D1 for snap-in mounting = 6 ± 0.05 D1 for snap-in mounting = 6 ± 0.05 D1 for snap-in mounting = 6 ± 0.05 D1 for self-tapping screw = 3.6 ± 0.1 D1 for self-tapping screw = 3.6 ± 0.1 D1 for self-tapping screw = 3.6 ± 0.1 1* only for protection class II Derating Curves 1-pole 2-pole 3.15 2.5 2.0 2.5 I = 1.0 I n I = 1.0 I 2.0 n 1.5 I = 0.7 I n I = 0.7 I n 1.5 I = << I n I = << I 1.0 n 1.0 0.5 0.5 0.0 0.0 020406080100 020406080 100 Ambient Air Temperature T °C Ambient Air Temperature T °C a a Connectors 3 Admissible Power Acceptance in Watt 12 9.9 21.9 24.45 9.9 19.35 ±0.1 5.5 19.7 Admissible power acceptance in Watt per pole 9.9 25.5 5.5 ±0.05 10.9 2.5 1* ±0.05 6.5 ±0.1 22.3 Power entry modules without line filter GSF1 https://www.schurter.com /PG05 All Variants Mounting side Panel mounting Panel Thickness Fuseholder Ground terminal 4.8 Ground terminal direction Packaging V-Lock Order Number s [mm] x 0.8 mm l Sandwich Snap-in 1.5 - angled to pin axis - GSF1.0202.31 Sandwich Snap-in 1.5 - l straight - GSF1.0201.31 Sandwich Snap-in 2 - l angled to pin axis - GSF1.0202.41 Sandwich Snap-in 2 - l straight - GSF1.0201.41 Sandwich Snap-in 2.5 - l angled to pin axis - GSF1.0202.51 Sandwich Snap-in 2.5 - l straight - GSF1.0201.51 Sandwich Snap-in 3 - l angled to pin axis - GSF1.0202.61 Sandwich Snap-in 3 - l straight - GSF1.0201.61 Sandwich Snap-in 1.5 1-pole l angled to pin axis - GSF1.1202.31 Sandwich Snap-in 1.5 1-pole l straight - GSF1.1201.31 Sandwich Snap-in 2 1-pole l angled to pin axis - GSF1.1202.41 Sandwich Snap-in 2 1-pole l straight - GSF1.1201.41 Sandwich Snap-in 2.5 1-pole l angled to pin axis - GSF1.1202.51 Sandwich Snap-in 2.5 1-pole l straight - GSF1.1201.51 l Sandwich Snap-in 3 1-pole angled to pin axis - GSF1.1202.61 Sandwich Snap-in 3 1-pole l straight - GSF1.1201.61 █ Sandwich Snap-in 1.5 2-pole l angled to pin axis - GSF1.2202.31 l Sandwich Snap-in 1.5 2-pole straight - GSF1.2201.31 l Sandwich Snap-in 2 2-pole angled to pin axis - GSF1.2202.41 Sandwich Snap-in 2 2-pole l straight - GSF1.2201.41 Sandwich Snap-in 2.5 2-pole l angled to pin axis - GSF1.2202.51 Sandwich Snap-in 2.5 2-pole l straight - GSF1.2201.51 Sandwich Snap-in 3 2-pole l straight - GSF1.2201.61 Sandwich Screw 1.5 - l angled to pin axis - GSF1.0002.31 Sandwich Screw 1.5 - l straight - GSF1.0001.31 Sandwich Screw 2 - l angled to pin axis - GSF1.0002.41 Sandwich Screw 2 - l straight - GSF1.0001.41 Sandwich Screw 2.5 - l angled to pin axis - GSF1.0002.51 Sandwich Screw 2.5 - l straight - GSF1.0001.51 Sandwich Screw 3 - l angled to pin axis - GSF1.0002.61 Sandwich Screw 3 - l straight - GSF1.0001.61 l █ Sandwich Screw 1.5 1-pole angled to pin axis - GSF1.1002.31 Sandwich Screw 1.5 1-pole l straight - GSF1.1001.31 Sandwich Screw 2 1-pole l angled to pin axis - GSF1.1002.41 Sandwich Screw 2 1-pole l straight - GSF1.1001.41 l Sandwich Screw 2.5 1-pole angled to pin axis - GSF1.1002.51 l Sandwich Screw 2.5 1-pole straight - GSF1.1001.51 Sandwich Screw 2.5 1-pole l straight - GSF1.1006.51 Sandwich Screw 3 1-pole l angled to pin axis - GSF1.1002.61 Sandwich Screw 3 1-pole l straight - GSF1.1001.61 Sandwich Screw 1.5 2-pole l angled to pin axis - GSF1.2002.31 Sandwich Screw 1.5 2-pole l straight - GSF1.2001.31 Sandwich Screw 2 2-pole l angled to pin axis - GSF1.2002.41 Sandwich Screw 2 2-pole l straight - GSF1.2001.41 Sandwich Screw 2.5 2-pole l angled to pin axis - GSF1.2002.51 Sandwich Screw 2.5 2-pole l straight - GSF1.2001.51 4 Connectors Power entry modules without line filter GSF1 https://www.schurter.com /PG05 Mounting side Panel mounting Panel Thickness Fuseholder Ground terminal 4.8 Ground terminal direction Packaging V-Lock Order Number s [mm] x 0.8 mm Sandwich Screw 3 2-pole l angled to pin axis - GSF1.2002.61 Sandwich Screw 3 2-pole l straight - GSF1.2001.61 Rear Side Snap-in 6 - l angled to pin axis - GSF1.0202.01 Rear Side Snap-in 6 - l straight - GSF1.0201.01 Rear Side Snap-in 6 1-pole l angled to pin axis - GSF1.1202.01 Rear Side Snap-in 6 1-pole l straight - GSF1.1201.01 Rear Side Snap-in 6 2-pole l angled to pin axis - GSF1.2202.01 █ Rear Side Snap-in 6 2-pole l straight - GSF1.2201.01 █ █ Rear Side Screw 6 - l angled to pin axis - GSF1.0002.01 Rear Side Screw 6 - l straight - GSF1.0001.01 l Rear Side Screw 6 1-pole angled to pin axis - GSF1.1002.01 l Rear Side Screw 6 1-pole straight - GSF1.1001.01 Rear Side Screw 6 2-pole l angled to pin axis - GSF1.2002.01 Rear Side Screw 6 2-pole l straight - GSF1.2001.01 Rear Side Metal snaps 6 - l angled to pin axis Blister tray GSF1.3402.01 Rear Side Metal snaps 6 1-pole l angled to pin axis Blister tray GSF1.4402.01 Rear Side Metal snaps 6 2-pole l angled to pin axis Blister tray GSF1.5402.01 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Insulation cover must be ordered separately. Order No. 0098.0078 Optional blister tray packaging 250 Pcs 50 Pcs Packaging unit Accessories Description Assorted Covers Rear Cover 0098.0078 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to GSF1 Connectors 5 Power entry modules without line filter GSF1 https://www.schurter.com /PG05 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to GSF1 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to GSF1 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 01.12.2017