Connectors (Inlets/Outlets) GSP1 https://www.schurter.com /PG07 IEC Appliance Inlet C14 or C18, Screw-on Mounting, Rear Side, PCB terminals C14 C18 See below: Approvals and Compliances 70° C 70° C Description Other versions on request - Panel Mount , Screw-on mounting from rear-side - Ground terminal with quick-connect terminal 6,3 x 0,8 mm - 1 Function : - With solder terminals - Variant with notch for V-Lock mating Cordsets - Appliance Inlet , Pin temperature 70 °C , protection class I or II Weblinks - For PCB mounting pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 Ratings UL/CSA 15 A / 250 VAC; 60 Hz (for cold conditions) pin-temperature 70 Dielectric Strength > 3 kVAC between L-N °C, 10 A, Protection Class I or II > 3 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Tempe- -25 °C to 70 °C rature IP-Protection from front side IP 40 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class I or II acc. to IEC 61140 Terminal For PCB mounting ; Ground terminal: Quick connect terminals 4.8 x 0.8 mm angled or straight Solder terminal on request Panel Thickness S Screw: max 3 mm Mounting screw torque max 0.5 Nm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: GSP1 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40012767 UL Approvals UL UL File Number: E96454 CQC Approvals CQC CCC Certificate Number: 2006010204183838 Connectors 1 Connectors (Inlets/Outlets) GSP1 https://www.schurter.com /PG07 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Dimensions [mm] 24.3 25.5 3.6 22 49.6 ±0.15 40 29.9 R6 3.5 ±0.05 8.7 max.R5.9 +0.2 30.3 0 without insulation cover with insulation cover ±0.15 40 Ground terminal Ground terminal 31.45 +0.1 ø 3.4 0 ±0.05 8.7 angled to pin axis straight 2 Connectors 27.8 ±0.5 3.5 +0.1 ø 3.4 0 ±0.1 15.85 ±0.1 15.85 21.9 14.25 +0.2 22.5 0 Connectors (Inlets/Outlets) GSP1 https://www.schurter.com /PG07 Drilling diagrams Variants GSP1.9xxx Variants GSP1.8xxx +0.1 +0.1 ±0.05 ±0.05 _ _ 9.05 0.2 9.05 0.2 7 7 ±0.15 40 ±0.15 40 X deleted for protection class II X deleted for protection class II All Variants Protection PCB terminal Mounting flange with Ground terminal 4.8 x 0.8 mm Cover Order Number Class spacing I 7/7.3 PCB side through holes, panel side pre-inserted nuts straight l GSP1.9413.1 I 7/7.3 holes for screws M3 angled to pin axis GSP1.9101.1 I 7/7.3 holes for screws M3 straight GSP1.9103.1 █ I 7/7.3 holes for screws M3 straight l GSP1.9113.1 █ I 7/7.3 holes for self-tapping screws 3mm, 4 screws enclosed straight GSP1.9503.1 █ I 7/7.3 pre-inserted nuts M3, 4 pcs. straight GSP1.9203.1 I 7/7.3 pre-inserted nuts M3, 4 pcs. straight GSP1.9203.121 I 9.05/9.7 PCB side through holes, panel side pre-inserted nuts angled to pin axis GSP1.8401.1 I 9.05/9.7 holes for screws M3 angled to pin axis GSP1.8101.1 █ █ I 9.05/9.7 holes for screws M3 angled to pin axis l GSP1.8111.1 I 9.05/9.7 holes for screws M3 straight GSP1.8103.1 I 9.05/9.7 holes for self-tapping screws 3mm, 2 screws enclosed angled to pin axis GSP1.8601.1 I 9.05/9.7 holes for self-tapping screws 3mm, 2 screws enclosed straight l GSP1.8613.1 █ I 9.05/9.7 holes for self-tapping screws 3mm, 4 screws enclosed angled to pin axis GSP1.8501.1 I 9.05/9.7 holes for self-tapping screws 3mm, without screws angled to pin axis GSP1.8701.1 I 9.05/9.7 pre-inserted nuts M3, 4 pcs. angled to pin axis GSP1.8201.1 █ I 9.05/9.7 pre-inserted nuts M3, 4 pcs. angled to pin axis l GSP1.8211.1 I 9.05/9.7 pre-inserted nuts M3, 4 pcs. straight GSP1.8203.1 II 7/7.3 holes for screws M3 - GSP1.9100.1 II 7/7.3 holes for screws M3 - l GSP1.9110.1 II 7/7.3 holes for self-tapping screws 3mm, 4 screws enclosed - GSP1.9500.1 II 7/7.3 pre-inserted nuts M3, 4 pcs. - GSP1.9200.1 II 9.05/9.7 holes for screws M3 - GSP1.8100.1 II 9.05/9.7 holes for screws M3 - l GSP1.8110.1 II 9.05/9.7 holes for self-tapping screws 3mm, 4 screws enclosed - GSP1.8500.1 II 9.05/9.7 pre-inserted nuts M3, 4 pcs. - GSP1.8200.1 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Suffix "21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching sys- tem prevents against accidental removal of the cordset. 50 Pcs Packaging unit Connectors 3 ±0.1 7.3 1.6 3.6 ±0.1 9.7 1.6 3.6 Connectors (Inlets/Outlets) GSP1 https://www.schurter.com /PG07 Mating Outlets/Connectors Category / Description Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to GSP1 ... Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black 6007.0204 Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214 Interconnection Cord further types to GSP1 Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0224 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0214 Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6044.0215 Power Supply Cord further types to GSP1 ... Power Supply or Interconnection Cord Overview complete Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black 6044.0204 Power Supply or Interconnection Cord further types to GSP1 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to GSP1 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 4 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 27.02.2018