SCHURTER KE10.6100.151

Power entry modules without line filter KE https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole and Voltage Selector Order required accessories separately C14 Approvals and Compliances 70° C Description Characteristics - Panel Mount : - Available with or without internal partial wired connections Screw-on version from front or rear side, snap-in version from front - For added safety "Extra-Safe" fuse drawers are available - Suitable for use in equipment according to IEC/UL 60950 side - 3 Functions : Other versions on request Appliance Inlet Protection class I , Fuseholder with interchangeable - For protection class II fuse drawer for Fuse-links 5x20 mm or 6.3x32 mm 1- or 2-pole , Vol- References tage Selector (series-parallel) Meets the requirements of IEC 60335-1 Alternative: version with line filter CE for appliances in unattended use. This includes the enhanced require- Weblinks ments of glow wire tests acc. to IEC 60695-2-12 and -13. pdf datasheet, html-datasheet, General Product Information, Distributor- - Quick connect terminals 4.8 x 0.8 mm Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 10 A / 125 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Dielectric Strength > 3 kVAC between L-N Protection Class I > 4 kVAC between L/N-PE Fuseholder 1 or 2 pole, Shocksafe category PC2 (1 min/50 Hz) acc. to IEC 60127-6, Allowable Operation Tempe- -25 °C to 70 °C for fuse-links 5 x 20 or 6.3 x 32 mm rature Rated Power Acceptance @ 5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per IP-Protection from front side IP 40 acc. to IEC 60529 Ta 23 °C pole Insulation cover Suitable for appliances with protection 6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole) class I acc. to IEC 61140 per pole Terminal Quick connect terminals 4.8 x 0.8 mm Power Acceptance @ Ta > Admissible power acceptance at higher Panel Thickness S Screw: max 8 mm 23°C ambient temperature see derating cur- Mounting screw torque max 0.5 Nm ves Snap-in: 1.5/2/2.5 mm Voltage Selector series-parallel, 4, 3 or 2 switch positions Material: Housing Thermoplastic, black, UL 94V-0 or usable as 2-pole change-over switch Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Connectors 1 Power entry modules without line filter KE https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: KE Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40030339 UL Approvals UL UL File Number: E93617 CSA Approvals CSA CSA Certification Record: 38456 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 Connectors Power entry modules without line filter KE https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 30 55 M3/ø 3.6 R 6 R 4.5 4.8x0.8 0 -0.2 R 3 18 R 3.1 2 +0.2 27.5 2.2 27.5 0 27.3 Snap-in mounting 55 ±0.1 S 30 R 4.5 4.8x0.8 0 -0.2 R 3 18 R 3.1 2 +0.2 27.5 2.2 27.5 0 27.3 Diagrams with partial wired internal connec- with partial wired without internal connections without internal connections tions 4 N N 4 N B N 3 3 L 3 A L A L 3 L 2-pole 1-pole 2-pole 1-pole Connectors 3 5 6 7 8 9 10 69.8 55 61.5 230 230 5 6 7 8 9 10 52.2 52.2 5 6 7 8 9 10 ø 3.2 ø 6.3x90° +0.3 0 52.5 5 6 7 8 9 10 +0.3 52.5 0 ±0.15 61.5 Power entry modules without line filter KE https://www.schurter.com /PG05 Derating Curves Fuses Fuses 5 x 20 mm (1-pole) 5 x 20 mm (2-pole, per pole) 2.5 2.0 2.0 1.5 I = 1.0 I n I = 1.0 I n 1.5 I = 0.7 I n I = 0.7 I n 1.0 I = << I n I = << I 1.0 n 0.5 0.5 0.0 0.0 020406080 100 020406080 100 Ambient air temperature T °C Ambient air temperature T °C a a Fuses Fuses 6.3 x 32 mm (1-pole) 6.3 x 32 mm (2-pole, per pole) 3.15 2.5 2.0 2.5 I = 1.0 I n I = 1.0 I 2.0 n 1.5 I = 0.7 I n I = 0.7 I n 1.5 I = << I n I = << I 1.0 n 1.0 0.5 0.5 0.0 0.0 020406080100 020406080 100 Ambient air temperature T °C Ambient air temperature T °C a a All Variants Panel mounting Panel Thickness Fuseholder Internally wired V-Lock Order Number s [mm] Snap-in 1.5 1-pole unwired KE15.1100.105 Snap-in 1.5 1-pole partially wired KE16.5100.105 Snap-in 2 1-pole partially wired KE16.5100.107 Snap-in 2.5 1-pole partially wired KE16.5100.109 Snap-in 1.5 2-pole unwired KE10.2100.105 Snap-in 2 2-pole unwired KE10.2100.107 Snap-in 2.5 2-pole unwired KE10.2100.109 Snap-in 1.5 2-pole partially wired KE10.6100.105 Snap-in 2 2-pole partially wired KE10.6100.107 Snap-in 2.5 2-pole partially wired KE10.6100.109 Screw - 1 or 2 pole prewired or unwired KE20.2100.151 Screw - 1-pole unwired KE15.1100.151 Screw - 1-pole partially wired KE16.5100.151 Screw - 2-pole unwired KE10.2100.151 █ █ Screw - 2-pole partially wired KE10.6100.151 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check- SCHURTER 20 Pcs Packaging unit 4 Connectors Admissible power acceptance in Watt Admissible power acceptance in Watt Admissible power acceptance in Watt Admissible power acceptance in Watt per pole per pole Power entry modules without line filter KE https://www.schurter.com /PG05 Required Accessory Description Fusedrawer 1 Fusedrawer for Fuse Links 5x20 mm resp. 6.3x32 mm 5 x 20, 2-pole 4305.0001 5 x 20, 1-pole 4305.0006 6.3 x 32, 2-pole 4305.0011 6.3 x 32, 1-pole 4305.0016 ... Jumper Wire 1 Connection with Stranded Cable Type A, 70 mm 0881.0074 Type A, 100 mm 0881.0075 Type B, 70 mm 0881.0076 Type B, 100 mm 0881.0077 Voltage Selectors Insert 1 Voltage Selector Insert to KE, CE, KG, CG 3 or 4 switch positions 4305.0048.00 1, 3 or 4 switch positions, 100, 120, 220, 240 4305.0048.01 3, 3 or 4 switch positions, 130, 110, 240, 220 4305.0048.02 2, 2 switch positions, 110, 220 4305.0048.03 ... Accessories Assorted Covers Rear Cover 0859.0076 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to KE Connectors 5 Power entry modules without line filter KE https://www.schurter.com /PG05 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to KE ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to KE The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 01.12.2017