SCHURTER KM01.1205.11

Power entry modules without line filter KM https://www.schurter.com /PG05 IEC Appliance Inlet C14 or C18 with Fuseholder 2-pole, Line Switch 1- or 2-pole Order required accessories separately KM with shield Snap-in version C14 C18 See below: Approvals and Compliances 70° C 70° C Description Characteristics - Panel Mount : - Ultra-compact design. Small dimensions in front of and behind the pa- Snap-in version from front side nel - All single elements are already wired - 3 Functions : - For added safety "Extra-Safe" fuse drawers are available Appliance Inlet protection class I or II , Line Switch 2-pole , Fuseholder - Ideal for application with high transient loads for fuse-links 5 x 20 mm 1- or 2-pole - Suitable for use in equipment according to IEC/UL 60950 - Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. Other versions on request to IEC 60695-2-12 and -13. - Fuse drawer 1-pole, plus spare fuse case - Quick connect terminals 4.8 x 0.8 mm - Fuse drawer 2-pole, with shorting bar - With cover on rear-side - Line switch 1-pole - Other rocker marking References Alternative: version with line filter KMF Alternative: version for screw mounting DD11 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 10 A / 250 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Dielectric Strength > 2.5 kVAC between L-N Protection Class I or II > 3 kVAC between L/N-PE Fuseholder 1 or 2 pole, Shocksafe category PC2 (1 min/50 Hz) acc. to IEC 60127-6, Allowable Operation Tempe- -25 °C to 70 °C for fuse-links 5 x 20 mm rature Rated Power Acceptance @ 5 x 20: 2 W (1 pole)/ 1.4 W (2-pole) per IP-Protection from front side IP 40 acc. to IEC 60529 Ta 23 °C pole Insulation cover Suitable for appliances with protection Choose fuse-links for 2-pole version class I or II acc. to IEC 61140 in such a way that the typical power Terminal Quick connect terminals 4.8 x 0.8 mm acceptance is less than 1.4 W for each , tin-plated pole Panel Thickness S Snap-in: 1/1.5/2/2.5 mm Power Acceptance @ Ta > Admissible power acceptance at higher (all steps with one variant) 23°C ambient temperature see derating cur- Material: Housing Thermoplastic, black, UL 94V-0 ves Line Switch Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1 Technical Details Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Connectors 1 Power entry modules without line filter KM https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: KM Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40046933 UL Approvals UL UL File Number: E93617 CQC Approvals CQC CCC Certificate Number: Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White paperGlow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 Connectors R1.5 R1.5 Power entry modules without line filter KM https://www.schurter.com /PG05 Dimensions [mm] KM without shield 30.35 25.7 L 0 N ±0.05 S +0.10 27.8 28 -0.05 30.5 3.2 26.15 2.5 KM with shield 30.4 25.7 L 0 N ±0.05 S +0.10 28.5 28.8 -0.05 30.5 10 26.2 2.5 Diagrams with shield L L' 2) 1) F1 PE PE' F2 N N' 1) Line 2) Load Connectors 3 max. R 0.3 max. R 0.3 50 50 10.7 10.7 47.5 46.8 +0.10 +0.10 47.8 -0.05 47 -0.05 Power entry modules without line filter KM https://www.schurter.com /PG05 Derating Curves 1-pole 2-pole 2.0 1.4 1.2 1.5 1.0 I = 1.0 I I = 1.0 I n n 0.8 I = 0.7 I I = 0.7 I n n 1.0 0.6 I = << I I = << I n n 0.4 0.5 0.2 0.0 0.0 020406080 100 020406080 100 Ambient air temperature Ta °C Ambient air temperature Ta °C All Variants Protection Class Fuseholder Line Switch EMC-Shielding Order Number I 1-pole 2-pole - KM00.1205.11 █ I 2-pole 2-pole - KM00.1105.11 █ █ II 2-pole 2-pole - KM00.2105.11 I 1-pole 2-pole With EMC-shield and without line filter KM01.1205.11 █ I 2-pole 2-pole With EMC-shield and without line filter KM01.1105.11 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 50 Pcs Packaging unit Required Accessory Description Fusedrawer 2 Fusedrawer für Fuse Links 5x20 mm, with or without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... 4 Connectors Admissible power acceptance in Watt Admissible power acceptance in Watt per pole Power entry modules without line filter KM https://www.schurter.com /PG05 Accessories Wire Harness Wire harness for SCHURTER products Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to KM Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to KM ... Mating Outlets/Connectors shuttered Power Cord Overview complete Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to KM The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Connectors 5 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 09.04.2018