SENSATA AIRPAX ATR11-C-X-63-WB-3.0A

ATR ATR T Th he er rm ma all C Ciir rc cu uiit t P Pr ro ot te ec ct to or r for Equipment for Equipment Application: Typical applications include power strips, single-phase motors, transformers, solenoids, UPS, etc. Operation: The trip mechanism of the circuit protector is designed to open the contacts in the event of a current flow in excess of the rated current and in accordance with the time/current characteristics of the device. A bimetal strip deflects and releases the latch mechanism when heated by an overload. The strip has the advantage of being immune to high inrush currents and line transients. The contacts open and close with a positive snap action, and the tripped state is clearly indicated by the protruding reset button. Shunt Terminal (Option N): Available on units of up to 6 amps equipped with a heater winding, an optional additional Specifications: terminal can be provided as a parallel circuit to the main Current Ratings: 0.5A - 16A, Standard Ratings Available current-sensing circuit. The shunt circuit between terminals Rated Voltage: 240 Vac, 50/60HZ, 32Vdc, 24Vdc (VDE) 1 and 3 may be used for any signal that may be required in Resettable Overload Capacity: 8x I for < 6A, addition to the main circuit. However, since the circuit makes n use of the bimetal strip as a current-carrying path, the trip 6x I or 60A max. ≥ 6A n time of the circuit protector may be slightly influenced. Operating Temperature: 60°C Max. Ambient Max. Interrupting Capacity: 1000A Time/Current Characteristics: The standard characteristic Insulation Resistance: >100 megohms is valid for an ambient temperature of 23°C. However, if the Dielectric Strength: 1.5 KV for 1 min. (per IEC 60934) device is to be used in an ambient temperature other than Operational Life: 1000 Cycles @ 2 x I n 23°C, an allowance must be made when selecting the Designed to meet: Shock: per MIL-STD-202, method 213, current rating. See the following guidelines: test condition I Vibration: per MIL-STD-202, method 204 test condition A Ambient Temperature Correction Factor Warranty: 24 months from date of Ambient Temp. -20 -5 0 +10 +20 +30 +40 +50 +60 (°C ) manufacture, as marked on unit Multiplication 0.8 0.88 0.9 0.96 1 1.05 1.12 1.2 1.3 Factor Example: Operating Characteristics: Normal Continuous Current: Airpax Airpax 1.8 A (min) 60 Ambient Temp.: 30 Expands Offering Expands Offering 40°C 20 Multiplication Factor: 10 1.12 Airpax, a global leader in the supply of Recommended Rating: 5 1.8 x 1.12 = 2.016 power protection products, has expanded its Select the Nearest Rating: offering to include the new ATR thermal circuit 1 2 A (S) 50 protector for equipment. The ATR is a single 20 Approvals: pole, thermally operated overload protector with a 10 snap-acting trip mechanism that provides reliable, 5 trip-free operation on current overloads. 2 Up to 16A 1 The ATR comes with an unequaled 24-month warranty. 0.5 Please contact Airpax for assistance in applying the ATR 0.2 thermal circuit protector to meet your power protection needs. Up to 12A 0.1 1.05 1.32 2 3 4 5 8 10 R R R Ro o o oH H H HS S S S Multiple of Current Rating (x I ) n C Co om mp plliia an nt t Airpax Corporation C Co om mp plliia an nt t Rated Current < 6A 807 Woods Road ≥ 6A Ambient Cambridge, Maryland 21613 USA Temperature 23°C Tel: 410.228.1500 Fax: 410.228.3456 Trip-Time inch Mounting Options: Knurled Nut: Protective Cover: mm P/N 053-000-0002 Dust/Splash (IP54) .402 C - Central Nut Mounting P/N 053-000-0001 10.2 .157 .394 .354 .571 9 4 .472 10 .236 .512 14.5 12 A/F 6 .370 13 .748 9.4 .118 1.083 19 .433 Torque not 3 27.5 11 .591 .100 to exceed 2.5 15 4 inch-pounds M10 x 1 .276 Shunt M10 x 1 7 Terminal .032 .512 1 .630 0.8 13 .079 2 16.0 3 2 .630 16 W - Wing Clip Mounting .157 .472 12 4 .571 .591 .472 .118 .626 14.5 3 15.0 12 15.9 .433 .547 1.087 .748 11 .635 13.9 27.6 19 16.13 “W” Type “D” Type .276 Shunt 1 .032 7 Double “D” Single “D” Terminal 2 0.8 Panel Cutout Panel Cutout 3 S - Snap-in Mounting X Panel .472 .512 .157 .441 Thickness 'X' 12 13 .335 4 11.2 8.5 .445 .862 .032 11.3 .866 .039 .854 .079 .059 .870 21.7 1.008 2 .079 .878 .551 25.6 .118 .890 14 .276 Shunt 1 7 Terminal 2 .032 .362 9.2 0.8 3 B - Integral Mounting .157 .394 .354 9 4 10 .441 .335 11.2 8.5 Airpax Corporation .748 .433 807 Woods Road 1.083 19 11 27.5 Cambridge, Maryland 1 .276 Shunt 21613 USA 2 3 Terminal 7 .032 Tel: 410.228.1500 0.8 Fax: 410.228.3456 P - PCB Mounting .157 .394 .354 9 10 4 .441 .335 11.2 8.5 All holes are 1.18 .051 Dia. .748 30 1.3 .433 1.083 19 11 27.5 .295 .276 .039 7.5 7 1 1 .689 .032 .110 .197 .590 17.5 2 0.8 2.8 15 5 1 First Decision 6 Sixth Decision Type Standard Current Ratings* ATR11 - C - X - 63 - R - 7.0A ATR11 Single pole, series, thermal circuit protector 0.5, 0.9, 1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.5, 2.7, 3.0, 3.3, 1 4.0, 5.0, 6.0, 6.5, 7.0, 8.0, 9.0, 10.0, 12.0, 15.0, 16.0 23 4 5 6 *For other ratings, please consult the factory. 2 Second Decision Note: Terminals 1 & 2 are Mounting 5 Fifth Decision standard for current Central hex nut C 3 ratings ≤ 6A Third Decision 4 Fourth Decision Reset Button Color Terminals 1 & 3 are W Wing clips Terminal Configuration R Red standard for current Terminal D Wing clips ratings > 6A B Black X Terminal 1 & 2 63 .250 Q.C. terminal Terminals 1 & 2 are W White S Snap-in optional for current 48 .187 Q.C. terminal RB Red w/trip band Y Terminal 1 & 3 B Integral ratings ≤ 8A 28 .110 Q.C. terminal BB Black w/trip band N Shunt Terminal P PCB PCB .040 solder terminal WB White w/trip band .354 9 ATR11 245-500-5032 02/06 Reset Condition Reset Condition Reset Condition Reset Condition Reset Condition