SENSATA AIRPAX LEJBXV6-41069-20-T

LEJ & LEJA Series Hydraulic-Magnetic Circuit Breakers Introduction • 133 Configurations • 134 Delay Curves • 142 Decision Tables • 143 LEJ & LEJA Series Hydraulic-Magnetic Circuit Breakers INTRODUCTION The LEJ/LEJA series circuit breaker meets the evolving demand for the high performance protection of critical data center and telecommunications applications requiring up to 277VAC per pole, UL 489 listing in the smallest case size currently available in the marketplace. The LEJ/LEJA platform is based on the highly successful and field proven LEG/LEGA designs while incorporating state-of-the-art arc quenching technologies and offering voltage ratings that are well suited for global applications that require 208VAC through 277VAC ratings for increased power efficiency. Typical applications include power distribution units (PDUs) used in data center enclosures, telecom AC power supplies and a variety of Industrial applications benefiting from the higher power density. Like the LEG/LEGA product family, the LEJ/LEJA series offers a variety of features including different terminations and actuators to meet most any requirements. FEATURES • Up to two poles, 2 amps to 20 amps rated current at 240VAC per pole • UL 489 listed and TÜV approvals available • Up to 10,000AIC short circuit amperage rating • Low Depth “A” option provides a 31% lower depth compared to standard LEJ product • Maintains the high performance characteristics, reliability, panel cut out and mounting dimensions of LEG/LEGA products SPECIFICATIONS Agency Certification Rated Amperage Maximum Voltage per Pole Short Circuit Amperage UL 489 2 to 20 amps 240 VAC, 50/60 Hz 5000 TÜV (EN60947-2) 2 to 20 amps 240 VAC, 50/60 Hz 5000 UL489 2 to 20 amps 240 VAC, 50/60 Hz 10000 UL489 2 to 20 amps 277 VAC, 50/60 Hz 10000 133 LEJ & LEJA Series - Introduction http://airpax.sensata.com CONFIGURATIONS: LEJ TOGGLE HANDLE SINGLE POLE TWO POLE, 1 HANDLE BARRIER 0.590 1.687 0.240 Ø MAX 0.420 [14.99] [42.85] [6.10] [10.67] ON LINE 32º 2.250 [57.15] 1.660 32º [42.16] 1.220 [30.99] OFF 2.075 0.690 MAX 2x 6-32 THREAD 0.750 1.515 [52.71] [17.53] MAX 0.140 [3.56] DEEP [19.05] [38.48] (M3 ISO THREAD OPTIONAL) OPTIONAL, HANDLE MAY BE IN TWO POLE, 2 HANDLE POLE 1 INSTEAD OF POLE 2 1.687 0.240 0.590 Ø MAX [42.85] [6.10] 4x 6-32 THREAD [14.99] 0.140 [3.56] DEEP (M3 ISO THREAD OPTIONAL) ON LINE 32º 2.250 [57.15] 1.660 [42.16] 32º 1.220 [30.99] OFF 0.690 2.075 1.515 MAX MAX [17.53] [52.71] [38.48] BARRIER PANEL MOUNT CUTOUT - 1 POLE PANEL MOUNT CUTOUT - 2 POLE, 1 HANDLE PANEL MOUNT CUTOUT - 2 POLE, 2 HANDLE +.010 Ø 0.625 -0.00 +0.25 15.88 1.660 1.660 1.660 -0.00 [42.16] [42.16] [42.16] +.010 1.050 1.050 1.050 2x Ø 0.625 -0.00 +.010 [26.67] [26.67] [26.67] Ø 0.625 -0.00 +0.25 15.88 -0.00 +0.25 15.88 -0.00 0.750 0.750 0.156 0.156 0.156 4x Ø 4x Ø 2x Ø [19.05] [19.05] [3.96] [3.96] [3.96] NOTES: 1. All mounting inserts shall be utilized when panel mounting circuit breakers. Panel mounting screws shall have recommended torque applied: 6/32 mounting inserts 6 - 8 inch pounds. M3 mounting inserts 4 - 5 inch pounds. 2. Panel mounting screws shall not extend beyond back of mounting panel more than specied mounting insert depth. 3. Mounting detail tolerance: ± 0.005 [0.13] unless noted. LEJ & LEJA Series - Configurations 134 LEJ & LEJA Series CONFIGURATIONS: LEJZX ROCKER HANDLE SINGLE POLE 2.378 0.420 MAX [60.40] [10.67] 2x 6-32 THREAD 0.750 1.687 0.125 (M3 ISO THREAD [19.05] [42.85] OPTIONAL) [3.18] 1.220 [30.99] 2.250 2.250 1.660 [57.15] [42.16] [57.15] 1.239 [31.47] 2.077 0.191 OPTIONAL OPTIONAL GUARD [52.76] 0.430 [4.85] HANDLE GUARDS (SEE DETAIL “A”) [10.92] TWO POLE PANEL MOUNT CUTOUT - 1 or 2 POLE 1.515 MAX [38.48] 0.156 2x Ø [3.96] 1.660 1.260 1.660 [42.16] [32.00] [42.16] 2.250 [57.15] 0.750 0.200 4x 6-32 THREAD [19.05] [5.08] BARRIER (M3 ISO THREAD OPTIONAL, HANDLE MAY BE IN OPTIONAL) POLE 2 INSTEAD OF POLE 1 NOTES: 1. All mounting inserts shall be utilized when panel mounting circuit breakers. Panel mounting screws shall have recommended torque applied: 6/32 mounting inserts 6 - 8 inch pounds. M3 mounting inserts 4 - 5 inch pounds. 2. Panel mounting screws shall not extend beyond back of mounting panel more than specied mounting insert depth. 3. Mounting detail tolerance: ± 0.005 [0.13] unless noted. 4. Two pole ZX has standoffs (as shown). It uses 2 panel screws. A higher shock capability (4 panel screws) is available (consult factory). 135 LEJ & LEJA Series - Series - Configurations http://airpax.sensata.com CONFIGURATIONS: LEJBX ROCKER HANDLE SINGLE POLE TWO POLE 2.470 0.387 MAX 1.515 [62.74] [9.83] MAX [38.48] 1.687 0.125 0.750 [42.85] [3.18] [19.05] 2x 6-32 THREAD (M3 ISO THREAD OPTIONAL) 1.220 [30.99] ON 2.250 2.250 [57.15] 1.660 [57.15] [42.16] OFF LINE 1.239 [31.47] 2.000 0.191 BARRIER [50.80] [4.85] OPTIONAL, HANDLE MAY BE BARRIER IN POLE 2 INSTEAD OF POLE 1 BX HANDLE WITHOUT GUARD GUARD (LIMITED ACCESS ACTUATE-OFF) ACCESS TO ACTUATE OFF IS LIMITED TO A DEVICE SMALLER THAN 0.069 [1.75] x 0.155 [3.94] PANEL MOUNT CUTOUT (1 POLE) PANEL MOUNT CUTOUT (2 POLE) PANEL PLUG (CONSULT FACTORY FOR AVAILABILITY) 0.750 0.750 0.125 [19.05] [19.05] [3.18] P/N: 121-710-2450 6-32 THD. (BLACK) 1.260 1.260 P/N: 121-710-2451 1.660 1.660 [32.00] [32.00] M3 THD. (BLACK) [42.16] [42.16] 1.660 [42.16] P/N: 121-450-3000 6-32 THD. (BLACK) 0.750 P/N: 121-450-3001 [19.05] M3 THD. (BLACK) 0.156 0.156 2x Ø 2x Ø [3.96] [3.96] LEJ & LEJA Series - Configurations 136 LEJ & LEJA Series CONFIGURATIONS: LEJA, TOGGLE HANDLE SINGLE POLE 0.735 TWO POLE 0.590 [18.67] Ø MAX 0.240 [14.99] [6.10] 1.028 [26.11] ON LINE 32º 2.250 3.455 1.660 [57.15] [87.76] 3.663 [42.16] [93.04] 32º 1.220 1.687 [30.99] [42.85] OFF 3.663 [93.04] 2x 6-32 THREAD 0.690 0.140 [3.56] DEEP (M3 ISO THREAD [17.53] OPTIONAL) 0.750 FLERXIBLE 1.760 1.515 [19.05] BARRIER [44.70] [38.48] 0.255 OPTIONAL, HANDLE MAY BE IN [6.48] POLE 1 INSTEAD OF POLE 2 LINE 0.070 [1.78] 2.960 [75.18] 1.734 [44.03] BARRIER REMOVED FOR CLARITY PANEL MOUNT CUTOUT - 1 POLE PANEL MOUNT CUTOUT - 2 POLE, 1 HANDLE NOTES: +.010 1. All mounting inserts shall be utilized when panel Ø 0.625 -0.00 mounting circuit breakers. Panel mounting +0.25 screws shall have recommended torque applied: 15.88 1.660 1.660 -0.00 6/32 mounting inserts 6 - 8 inch pounds. [42.16] [42.16] M3 mounting inserts 4 - 5 inch pounds. 2. Panel mounting screws shall not extend beyond back of mounting panel more than specied 1.050 1.050 +.010 mounting insert depth. [26.67] [26.67] Ø 0.625 -0.00 3. Mounting detail tolerance: ± 0.005 [0.13] unless noted. +0.25 15.88 -0.00 0.767 0.156 0.156 4x Ø 2x Ø [19.48] [3.96] [3.96] 137 LEJ & LEJA Series - Configurations http://airpax.sensata.com CONFIGURATIONS: LEJBXA ROCKER HANDLE SINGLE POLE TWO POLE 0.750 0.387 [19.05] [9.84] 0.125 [3.18] 3.663 [93.04] 1.220 1.687 [30.99] [42.85] ON ON 2.250 3.455 3.663 1.660 [57.15] [87.76] [93.04] [42.16] OFF OFF LINE 1.239 0.799 [31.47] [20.29] OPTIONAL 2.074 2x 6-32 THREAD 1.515 FLERXIBLE HANDLE GUARD [52.68] 0.140 [3.56] DEEP [38.48] BARRIER (M3 ISO THREAD OPTIONAL, HANDLE MAY BE IN OPTIONAL) POLE 2 INSTEAD OF POLE 1 2.960 [75.18] 0.070 [1.78] LINE 0.255 [6.48] BARRIER REMOVED FOR CLARITY PANEL MOUNT CUTOUT - 1 POLE PANEL MOUNT CUTOUT - 2 POLE 0.156 0.750 NOTES: 4x Ø 0.750 [3.96] 1. All mounting inserts shall be utilized when panel [19.05] [19.05] mounting circuit breakers. Panel mounting screws shall have recommended torque applied: 6/32 mounting inserts 6 - 8 inch pounds. M3 mounting inserts 4 - 5 inch pounds. 2. Panel mounting screws shall not extend beyond 1.660 1.260 1.260 back of mounting panel more than specied 1.660 [42.16] mounting insert depth. [32.00] [32.00] [42.16] 3. Mounting detail tolerance: ± 0.005 [0.13] unless noted. 0.200 0.767 0.200 0.156 [5.08] 2x Ø [19.48] [5.08] [3.96] LEJ & LEJA Series - Configurations 138 LEJ & LEJA Series CONFIGURATIONS: LEJZXA, ROCKER HANDLE FLERXIBLE 0.750 SINGLE POLE TWO POLE BARRIER [19.05] 0.430 [10.92] 2x 6-32 THREAD 0.140 [3.56] DEEP (M3 ISO THREAD OPTIONAL) 1.229 3.663 1.687 [31.22] [93.04] [42.85] 3.455 1.239 1.660 [87.76] [31.47] [42.16] 2.250 [57.15] LINE OPTIONAL HANDLE 0.799 GUARD [20.29] 0.125 [3.18] 2.150 1.515 [54.61] [38.48] 0.240 [6.10] 2.960 [75.18] 0.070 [1.78] 1.830 BARRIER REMOVED FOR CLARITY [46.49] PANEL MOUNT CUTOUT - 1 POLE PANEL MOUNT CUTOUT - 2 POLE 2x STANDARD 0.156 Ø 0.750 0.750 4x HIGHER SHOCK [3.96] NOTES: [19.05] [19.05] 1. All mounting inserts shall be utilized when panel mounting circuit breakers. Panel mounting screws shall have recommended torque applied: 6/32 mounting inserts 6 - 8 inch pounds. M3 mounting inserts 4 - 5 inch pounds. 1.260 1.660 1.260 2. Panel mounting screws shall not extend beyond [32.00] [42.16] [32.00] back of mounting panel more than specied mounting insert depth. 3. Mounting detail tolerance: ± 0.005 [0.13] unless noted. 0.200 0.767 [5.08] 0.200 [19.48] [5.08] 0.156 2x Ø [3.96] 139 LEJ & LEJA Series - Configurations http://airpax.sensata.com BARRIER OPTIONS FOR MULTI-POLE UNITS STANDARD BARRIER - TOGGLE HANDLE STANDARD BARRIER - ZX & BX HANDLE 0.102 1.893 0.601 [2.59] [48.08] [15.27] LINE 0.879 3.207 3.207 0.879 [22.33] [81.46] [81.46] [22.33] LINE 0.601 1.893 0.102 [15.27] [48.08] [2.59] OPTIONAL (-Z) BARRIER - ZX & BX HANDLE OPTIONAL (-Z) BARRIER - TOGGLE HANDLE 0.097 0.110 [2.46] [2.79] LINE 2.475 2.475 0.875 0.875 [62.86] [62.86] [22.23] [22.23] LINE 0.110 0.097 [2.46] [2.79] LEJ & LEJA Series - Barrier Options 140 LEJ & LEJA Series TERMINAL OPTIONS STANDARD - QUICK CONNECT & SCREW TERMINALS OPTIONAL - FLAT BUS CONNECT SCREW TERMINAL 0.370 0.354 [9.40] [8.99] 0.354 LINE [8.99] 1.675 1.643 [42.55] [41.73] NOTES: 1. Terminals: Quick Connect = 0.250 [6.35] wide x 0.031 [0.79] thick Screw = 10-32 or M5 x 0.8 TÜV approval with screw terminals include external tooth lockwashers 2. 10000 AIC available only with screw terminals OPTIONAL HANDLE LOCK FOR TOGGLE HANDLE A handle lock option is available to prevent accidental actuation of the handle. The handle lock may be used in the ON or OFF position. This option is available pre-assembled or seperately. Consult factory for ordering information. Retainer (required for single pole only) 386-000-9030 Handle Lock (Single Pole) RED: 762-600-7651 BLACK: 762-600-7650 Handle Lock (Multi-Pole) RED: 762-600-7654 BLACK: 762-600-7653 Handle lock installed in factory will be mounted from the logo case side on single pole on two pole units, handle lock will latch into pole 2 141 LEJ & LEJA Series - Terminations http://airpax.sensata.com DELAY CURVES 50/60Hz Short Delay 50/60Hz Medium Delay 10000 10000 1000 1000 DELAY 61 DELAY 62 100 100 10 10 1 1 .1 .1 .01 .01 .001 .001 0 100 150 200 300 400 500 600 700 800 900 1000 0 100 150 200 300 400 500 600 700 800 900 1000 125 125 PERCENT OF RATED CURRENT PERCENT OF RATED CURRENT 50/60Hz Long Delay (Motor Start) 50/60Hz 125% Instant Trip 10000 10000 1000 DELAY 63 1000 DELAY 69 100 100 10 10 1 1 .1 .1 .01 .01 .001 .001 0 100 150 200 300 400 500 600 700 800 900 1000 0 100 150 200 300 400 500 600 700 800 900 1000 125 125 PERCENT OF RATED CURRENT PERCENT OF RATED CURRENT PERCENTAGE OF RATED CURRENT VS TRIP TIME IN SECONDS Delay 100% 125% 150% 200% 400% 600% 800% 1000% 61 No Trip .700 to 12 .35 to 7.0 .130 to 3.0 .030 to 1 .015 to .3 .01 to .15 .008 to .1 62 No Trip 10 to 120 6 to 60 2 to 20 .2 to 3.0 .015 to 2 .015 to .8 .01 to .25 63 No Trip 50 to 700 30 to 400 10 to 150 1.5 to 20 .015 to 10 .013 to .85 .013 to .5 69 No Trip 0.120 max 0.100 max 0.050 max 0.022 max 0.017 max 0.017 max 0.017 max INRUSH PULSE TOLERANCE TYPICAL RESISTANCE / IMPEDANCE Delay Pulse Tolerance Impedance Current DCR and Impedance based on Ratings AC, 50/60Hz (ohms) 61, 62, 63 10 times rated current (approx) 100% rated current applied and (Amps) 61, 62, 63, 69 stabilized for a minimum of one The table above provides a comparison of inrush pulse hour. Tolerance .05-2.5 amperes 2.00 0.29 ± 20%: 2.6 -20 amperes ± 25%. tolerance for each of the 50/60Hz delays. Pulse tolerance is Consult factory for special 5.00 0.051 defined as a single pulse of half sine wave peak current values and for coil impedance amplitude of 8 milliseconds duration that will not trip the 10.0 0.016 of delays not shown. circuit breaker. Consult Sensata Technologies for further 20.0 0.006 assistance. LEJ & LEJA Series - Delay Curves 142 TIME IN SECONDS TIME IN SECONDS MAY TRIP MAY TRIP TIME IN SECONDS TIME IN SECONDS MAY TRIP MAY TRIP LEJ & LEJA Series DECISION TABLES 1. Type & Handle Step 1a Step 1b (optional) Step 1c (optional) One Handle Standard toggle Flat bus connect LEJ F per Unit, & mounting screw terminal UL 489 Listed, (no entry, proceed (ex. LUJZXF) CSA, TÜV* to step 1c) 7. Handle Colors, Indicators & Markings BX at rocker with One Handle BX Low depth construction LEJH A integral mounting Toggle Handle per Pole, (ex. LEJA) UL 489 Listed, ZX rocker with ZX Unmarked Marked Handle Unmarked Marked Handle Unmarked Marked Handle Unmarked Marked Handle CSA, TÜV* integral mounting ON - OFF Color ON - OFF Color ON - OFF Color ON - OFF Color I - O I - O I - O I - O One Handle LUJ * TÜV approval (EN60947-2) requires “T” added to end of part number per Unit, - 00 - 01 Black - 10 - 11 Yellow - 20 - 21 Red - 30 - 31 Blue UL 489 Listed “ZX” & “BX” versions are single handle construction only. 2-pole units handle may be located on either - 40 - 41 Green - 60 - 61 Orange - 90 - 91 White pole, other than standard handle locations shown. Units must be ordered as non descript part numbers. One Handle LUJH per Pole, ZX Rocker Handle (Two-Color Rocker, Marking Detail “A”) UL 489 Listed 8. Approvals Vertical Mount Vertical Mount Vertical Mount Horizontal Mount Horizontal Mount Horizontal Mount ON - OFF I - O ON - OFF ON - OFF I - O ON - OFF Handle Indicating Marking Indicates I - O I - O Color Color Color 2. Poles & Terminals T TÜV approved (fig 1) (fig 2) (fig 3) (fig 4) (fig 5) (fig 6) Certied to EN60947-2 Includes the CE mark 1 Single Pole, Quick Connect Terminals - F1 - F2 - F3 - F4 - F5 - F6 Black White White OFF 11 Two Poles, Quick Connect Terminals - G1 - G2 - G3 - G4 - G5 - G6 Black Red White OFF LEJBXA 66 –1– 62 – 20.0 – AG – M6– T Single Pole, Screw Terminals* 6 BX Rocker Handle (Two-Color Rocker, Marking Detail ”A”) Two Poles, Screw Terminals* 66 *Screw terminals only for 10KAIC Vertical Mount Vertical Mount Vertical Mount Horizontal Mount Horizontal Mount Horizontal Mount ON - OFF I - O ON - OFF ON - OFF I - O ON - OFF Handle Indicating Marking Indicates I - O I - O Color Color Color (fig 1) (fig 2) (fig 3) (fig 4) (fig 5) (fig 6) 3. Internal Configuration — - M2 - M3 — — - M6 Black White White OFF 1 Series — - N2 - N3 — — - N6 Black Red Red OFF For BX: Bezel of BX is black. BX markings are same color as indicating color. Consult factory for other marking options. For ZX: Black, red, blue and green handles have white marking. White, yellow and orange handles have black marking. 4. Frequency & Delay Note, these are just a few of the options/orientations/colors available, please consult the factory for additional information. 61 50/60Hz Short Delay 62 50/60Hz Medium Delay LOAD ON ON 50/60Hz Long Delay 63 LINE LOAD LINE LOAD LINE LOAD (Motor Start) OFF ON O OFF ON OFF O OFF LINE 50/60Hz 69 125% Instant Trip FIG. 1 FIG. 2 FIG. 3 FIG. 4 FIG. 5 FIG. 6 6. Additional Options Standard hardware, MARKING DETAIL “A” 5. Rated Current no options required Metric thread mounting inserts A NOTE: “ON” actuates towards the “up” and “right” direction Use three numbers in build and terminal hardware (2.00 or 15.0 or 20.0) Handle guard w/ limited access G (available for ZX & BX versions only) Required value between 2.00 amps minimum and Handle in opposite pole M 20.0 amps maximum, (2-pole only) full integers only Optional “Z” barrier Z (not available on “A” low depth) (specials available upon request) R 240VAC, 10KAIC E 277VAC, 10KAIC 143 LEJ & LEJA Series - Decision Tables http://airpax.sensata.com O O 1. Type & Handle Step 1a Step 1b (optional) Step 1c (optional) One Handle Standard toggle Flat bus connect LEJ F per Unit, & mounting screw terminal UL 489 Listed, (no entry, proceed (ex. LUJZXF) CSA, TÜV* to step 1c) 7. Handle Colors, Indicators & Markings BX at rocker with One Handle BX Low depth construction LEJH A integral mounting Toggle Handle per Pole, (ex. LEJA) UL 489 Listed, ZX rocker with ZX Unmarked Marked Handle Unmarked Marked Handle Unmarked Marked Handle Unmarked Marked Handle CSA, TÜV* integral mounting ON - OFF Color ON - OFF Color ON - OFF Color ON - OFF Color I - O I - O I - O I - O One Handle LUJ * TÜV approval (EN60947-2) requires “T” added to end of part number per Unit, - 00 - 01 Black - 10 - 11 Yellow - 20 - 21 Red - 30 - 31 Blue UL 489 Listed “ZX” & “BX” versions are single handle construction only. 2-pole units handle may be located on either - 40 - 41 Green - 60 - 61 Orange - 90 - 91 White pole, other than standard handle locations shown. Units must be ordered as non descript part numbers. One Handle LUJH per Pole, ZX Rocker Handle (Two-Color Rocker, Marking Detail “A”) UL 489 Listed 8. Approvals Vertical Mount Vertical Mount Vertical Mount Horizontal Mount Horizontal Mount Horizontal Mount ON - OFF I - O ON - OFF ON - OFF I - O ON - OFF Handle Indicating Marking Indicates I - O I - O Color Color Color T TÜV approved (g 1) (g 2) (g 3) (g 4) (g 5) (g 6) Certied to EN60947-2 2. Poles & Terminals Includes the CE mark - F1 - F2 - F3 - F4 - F5 - F6 Black White White OFF 1 Single Pole, Quick Connect Terminals - G1 - G2 - G3 - G4 - G5 - G6 Black Red White OFF LEJBXA 66 –1– 62 – 20.0 – AG – M6– T 11 Two Poles, Quick Connect Terminals Single Pole, Screw Terminals BX Rocker Handle (Two-Color Rocker, Marking Detail ”A”) 6 Two Poles, Screw Terminals 66 Vertical Mount Vertical Mount Vertical Mount Horizontal Mount Horizontal Mount Horizontal Mount ON - OFF I - O ON - OFF ON - OFF I - O ON - OFF Handle Indicating Marking Indicates I - O I - O Color Color Color (g 1) (g 2) (g 3) (g 4) (g 5) (g 6) 3. Internal Conguration — - M2 - M3 — — - M6 Black White White OFF 1 Series — - N2 - N3 — — - N6 Black Red Red OFF For BX: Bezel of BX is black. BX markings are same color as indicating color. Consult factory for other marking options. For ZX: Black, red, blue and green handles have white marking. White, yellow and orange handles have black marking. 4. Frequency & Delay Note, these are just a few of the options/orientations/colors available, please consult the factory for additional information. 61 50/60Hz Short Delay 62 50/60Hz Medium Delay LOAD ON ON 50/60Hz Long Delay 63 LINE LOAD LINE LOAD LINE LOAD (Motor Start) OFF ON O OFF ON OFF O OFF LINE 50/60Hz 69 125% Instant Trip FIG. 1 FIG. 2 FIG. 3 FIG. 4 FIG. 5 FIG. 6 6. Additional Options Standard hardware, MARKING DETAIL “A” 5. Rated Current no options required Metric thread mounting inserts A NOTE: “ON” actuates towards the “up” and “right” direction Use three numbers in build and terminal hardware (2.00 or 15.0 or 20.0) Handle guard w/ limited access G (available for ZX & BX versions only) Required value between 2.00 amps minimum and Handle in opposite pole M 20.0 amps maximum, (2-pole only) full integers only Optional “Z” barrier Z (not available on “A” low depth) (specials available upon request) LEJ & LEJA Series - Decision Tables 144 LEJ & LEJA Series O O