GL OBAL POWER SOL UTIONS SKYNET SKYNET GL OBAL POWER SOL UTIONS SNP-G12 Series SNP-G12 SERIES 150 Watt ITE & Medical Power Supply 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.28” Measures: 4.00 x 2.00 x 1.26” Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 120W Convection www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 • ITE & Medical Safety Approvals Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 150W with 8 CFM • 2 MOPP Medical Safety Approvals 200W Peak • Appropriate for BF applicaiton • Built-in active PFC • With ITE & Medical safety • Rated load by convection • Max. load by forced air • High torque good for motor start up • I/P < 0.5W when O/P < 50mW • With 12V/0.5A output for fan • 10 Year Warranty green power ITE Approved Models -A -A -A -A -A -A -A Medical Approved Models -MA A -M -MA -MA -MA -MA Power supplies which require <0.5W standby mode will create audible burst sound at light load. Suffix A designates no burst sound by removing standby mode operation at 0.5W (which is the stocking standard part number). If Standby mode with audible burst noise is required, remove suffix A (minimum quantities may apply). Notes o o Note: All specifications without special notices are defined at nominal line, rated load and 25 C. Inrush current is defined at 25 C cold start and EMI capacitors are excluded. To order medical model, please add suffix "-M" in the end of the ITE model name, e.g. SNP-G127-M. Over voltage protection mode is defined at 60% rated load. Initial accuracy is set at 60% rated load and 115VAC input. Average efficiency is the average efficiency value of 25%, 50%, 75% and 100% rated load at nominal line input. o 1. Peak load can last 2 seconds with 10% duty cycle and average power < 100W Standby Power Cosumption with System:For computers and displays, ENERG . Y MTBF is calculated according to MIL-HDBK-217F at rated load/nominal line input and 45 4. Isolation Grade: C ambient temperature. Ripple & Noise is defined with 20MHz BWL oscilloscope and 1X probe with 0.47uF output capacitor. All specifications subject to change without notice. STAR in U.S. and ErP regulation in Europe require the input power should be Primary Ground : 1MOPP (1500Vac) less than 0.5W at standby mode. Primary Secondary : 2MOPP (4000Vac) 2. Output Load: 120W for convection cooling; 150W for forced air cooling. Secondary Ground : 1MOPP (1500Vac) 3. Peak Load Duration: Peak 200W can last for 5 sec. 5. Earth leakage current < 300uA, Touch current < 100uA 6. EMI Grounding: If there is a metal sheet under the power supply, connect the EMI ground to the metal sheet. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 (866) 588-1750 power@sager .com http://power.sager.com/skynet-SNP-G12-power-supply.html sales@powergatellc.com http://www.powergatellc.com/skynet-snp-g12-power-supply.html h t t p: / / pow e r. sa ge r. c om ww w. po w ergatellc . c o m Rated 120W Max. 150W Medical & ITE Peak 200W General Purpose SNP-G12 Series GL OBAL POWER SOL UTIONS Features: ● Design for BF applicaiton ● Built-in active PFC ● With ITE & Medical safety ● Rated load by convection ● Max. load by forced air ● High torque good for motor start up ● I/P < 0.5W when O/P < 50mW ● With 12V/0.5A output for fan Applications: SKYNET SKYNET GL OBAL POWER SOL UTIONS SNP-G12 Series ● For dental, laboratory products, pumps, monitors, sleep SNP-G12 SERIES 150 Watt ITE & Medical Power Supply 2" x 4" x 1.28" 150 Watt Open Frame Power Supply apnea devices and many other uses. Measures: 4.00 x 2.00 x 1.28” Measures: 4.00 x 2.00 x 1.26” General Specifications: Input voltage ......................................... 90 VAC to 264 VAC EMI .......................................... EN55022 "B", EN61000-3-3 Input frequency ............................................. 47 Hz to 63 Hz Harmonics............................................ EN61000-3-2, class D Inrush current ................................ < 30/60A at 115/230VAC EMS...................................... EN61000-4-2,-3,-4,-5,-6,-8,-11 nd Hold up time ...................................................... 20ms typical Safety ................................. UL/CSA/EN60950-1, 2 edition rd Over load/Short circuit protection ................... auto recovery ANSI/AMMI/CSA/EN60601-1, 3 edition Over voltage protection ............................................ latch off CB report, CE mark, RM report/file Rated 120W o o Operating temperature ..................................... -20 C to 70 C Energy Saving (for w/o -A suffix) ...................... ENERGY STAR o o Max. 150W derating: 2.5% / C > 45 C for convection cooling for computers version 6.0 Medical & ITE o o Peak for displays version 6.0 200W Storage temperature ..................................... -40 C to +85 C ErP regulation EC(No) 1275/2008 General Purpose SNP-G12 Series Mechanical Specifications: Notes: 1. Size: Performance for SNP-G127: 106.6 (4") 2" x 4" x 1.28" 2. Mounting Hole: 44.5 x 95.3 (mm) 1. Switching frequency ripple 2. Line frequency ripple 3. Connectors: AC input: JST B2P3-VH or equivalent 50.8 (2") DC output: JST 710--VH04 Fan: Molex 5045-02A or equivalent 4. Output Pin assignment: Function Pin assignment: TB3 1 2 3 4 Function FAN Output Vo Vo GND GND Pin +12V/10A 1 GND +12V/10A 2 +12V 5. Packing: Net weight: 160 g approx. / unit Gross weight: 10 kg approx. / carton, 80 units / carton 32.0 max. (1.28") Carton size (mm): 422 (L) x 412 (W) x 287 (H) -Hui- 10 years Warranty (contact Skynet's Distributors for details) 50mV/div, 5us/div 50mV/div, 5ms/div ** This data sheet is only for models selection. For business, engineering specification by model must be used. JUL. 2014 4-1 3. Output turn on wave form 4. Output turn off wave form +12V/10A +12V/10A 5.0V/div, 10ms/div 5.0V/div, 20ms/div 5. Hold-up time 6. Over voltage protection Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: Trip point around 14.2V (60% Rated load) Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 (866) 588-1750 power@sager .com http://power.sager.com/skynet-SNP-G12-power-supply.html sales@powergatellc.com http://www.powergatellc.com/skynet-snp-g12-power-supply.html h t t p: / / pow e r. sa ge r. c om ww w. po w ergatellc . c o m 5.0V/div 200V/div Primary DC 10ms/div 5.0V/div, 20ms/div -Hui- ** This data sheet is only for models selection. For business, engineering specification by model must be used. JUL. 2014 4-3 Rated 120W Max. 150W Medical & ITE Peak 200W General Purpose SNP-G12 Series Performance for SNP-G127: 1. Switching frequency ripple 2. Line frequency ripple +12V/10A +12V/10A GL OBAL POWER SOL UTIONS 50mV/div, 5us/div 50mV/div, 5ms/div 3. Output turn on wave form 4. Output turn off wave form +12V/10A +12V/10A Rated 120W Max. 150W Medical & ITE Peak 200W SKYNET SKYNET General Purpose SNP-G12 Series GL OBAL POWER SOL UTIONS SNP-G12 Series SNP-G12 SERIES 150 Watt ITE & Medical Power Supply 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.28” Measures: 4.00 x 2.00 x 1.26” 5.0V/div, 10ms/div 5.0V/div, 20ms/div 5. Hold-up time 7. +12V step response 6. Over voltage protection 8. +12V peak load Trip point around 14.2V (60% Rated load) Rated 120W Max. 150W Medical & ITE Peak 200W +12V 5.0V/div General Purpose SNP-G12 Series 200V/div Primary DC +12V/16.7A 0.5V/div, 2ms/div 2.00V/div, 1s/div 10ms/div 5.0V/div, 20ms/div +12V step from 3A to 10A -Hui- 7. +12V step response 8. +12V peak load 9. FCC B 10. CISPR 22 B ** This data sheet is only for models selection. For business, engineering specification by model must be used. JUL. 2014 4-3 +12V +12V/16.7A 0.5V/div, 2ms/div 2.00V/div, 1s/div +12V step from 3A to 10A 9. FCC B 10. CISPR 22 B 11. Power derating curve 12. Capability for driving motor SNP-G127 (SNP-G129) ( ) 2V 5V 12V/24A ● ( ) 24V/12A ( ) 2.5V 8V 12V/23A ● (24V/11.5A) 8V(11V) 12V/22A ● (24V/11A) ( ) 9V 14V 12V/21A ● (24V/10.5A) 9.3V(18V) 12V/20A ● ( ) 24V/10A 0 20 40 60 80 100 120 140 160 180 Operation time (ms) -Hui- 11. Power derating curve 12. Capability for driving motor SNP-G127 ** This data sheet is only for models selection. For business, engineering specification by model must be used. 4-4 JUL. 2014 (SNP-G129) ( ) 2V 5V 12V/24A ● (24V/12A) 2.5V(8V) 12V/23A ● (24V/11.5A) ( ) 8V 11V 12V/22A ● (24V/11A) 9V(14V) 12V/21A ● (24V/10.5A) 9.3V(18V) 12V/20A ● (24V/10A) 0 20 40 60 80 100 120 140 160 180 Operation time (ms) Specifications are subject to change without notice. It is r -Hui- esponsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 ** This data sheet is only for models selection. For business, engineering specification by model must be used. (866) 588-1750 4-4 JUL. 2014 power@sager .com http://power.sager.com/skynet-SNP-G12-power-supply.html sales@powergatellc.com http://www.powergatellc.com/skynet-snp-g12-power-supply.html h t t p: / / pow e r. sa ge r. c om ww w. po w ergatellc . c o m Rated 120W Max. 150W Medical & ITE Peak 200W General Purpose SNP-G12 Series Features: ● Design for BF applicaiton ● Built-in active PFC ● With ITE & Medical safety ● Rated load by convection ● Max. load by forced air ● High torque good for motor start up ● I/P < 0.5W when O/P < 50mW ● With 12V/0.5A output for fan Applications: ● For dental, laboratory products, pumps, monitors, sleep 2" x 4" x 1.28" apnea devices and many other uses. Rated 120W Max. 150W Medical & General Specifications: ITE GL OBAL POWER SOL UTIONS Peak 200W General Purpose SNP-G12 Series Input voltage ......................................... 90 VAC to 264 VAC EMI .......................................... EN55022 "B", EN61000-3-3 Input frequency ............................................. 47 Hz to 63 Hz Harmonics............................................ EN61000-3-2, class D Inrush current ................................ < 30/60A at 115/230VAC EMS...................................... EN61000-4-2,-3,-4,-5,-6,-8,-11 nd Hold up time ...................................................... 20ms typical Safety ................................. UL/CSA/EN60950-1, 2 edition Features: rd Over load/Short circuit protection ................... auto recovery ANSI/AMMI/CSA/EN60601-1, 3 edition ● Design for BF applicaiton Over voltage protection ............................................ latch off CB report, CE mark, RM report/file o o ● Built-in active PFC Operating temperature ..................................... -20 C to 70 C Energy Saving (for w/o -A suffix) ...................... ENERGY STAR ● SKYNET With ITE & Medical safety o o SKYNET derating: 2.5% / C > 45 C for convection cooling for computers version 6.0 GL OBAL POWER SOL UTIONS ● SNP-G12 Series Rated load by convection SNP-G12 SERIES o o 150 Watt ITE & Medical Power Supply for displays version 6.0 ● 150 Watt Open Frame Power Supply Storage temperature ..................................... -40 C to +85 C Max. load by forced air Measures: 4.00 x 2.00 x 1.28” Measures: 4.00 x 2.00 x 1.26” ● High torque good for motor start up ErP regulation EC(No) 1275/2008 ● I/P < 0.5W when O/P < 50mW ● With 12V/0.5A output for fan MECHANICAL DRAWING Mechanical Specifications: Applications: Notes: 1. Size: ● For dental, laboratory products, pumps, monitors, sleep 106.6 (4") 2" x 4" x 1.28" 2" x 4" x 1.28" apnea devices and many other uses. 2. Mounting Hole: 44.5 x 95.3 (mm) 3. Connectors: AC input: JST B2P3-VH or equivalent General Specifications: 50.8 (2") DC output: JST 710--VH04 Fan: Molex 5045-02A or equivalent 4. Output Pin assignment: Function Pin assignment: Input voltage ......................................... 90 VAC to 264 VAC EMI .......................................... EN55022 "B", EN61000-3-3 Input frequency ............................................. 47 Hz to 63 Hz Harmonics............................................ EN61000-3-2, class D TB3 1 2 3 4 Function Inrush current ................................ < 30/60A at 115/230VAC EMS...................................... EN61000-4-2,-3,-4,-5,-6,-8,-11 FAN Output nd Vo Vo GND GND Pin Hold up time ...................................................... 20ms typical Safety ................................. UL/CSA/EN60950-1, 2 edition 1 GND rd Over load/Short circuit protection ................... auto recovery ANSI/AMMI/CSA/EN60601-1, 3 edition 2 +12V 5. Packing: Over voltage protection ............................................ latch off CB report, CE mark, RM report/file o o Net weight: 160 g approx. / unit Operating temperature ..................................... -20 C to 70 C Energy Saving (for w/o -A suffix) ...................... ENERGY STAR Gross weight: 10 kg approx. / carton, 80 units / carton 32.0 max. o o derating: 2.5% / C > 45 C for convection cooling for computers version 6.0 (1.28") Carton size (mm): 422 (L) x 412 (W) x 287 (H) o o for displays version 6.0 Storage temperature ..................................... -40 C to +85 C ErP regulation EC(No) 1275/2008 -Hui- 10 years Warranty (contact Skynet's Distributors for details) Mechanical Specifications: Notes: ** This data sheet is only for models selection. For business, engineering specification by model must be used. JUL. 2014 4-1 1. Size: 106.6 (4") 2" x 4" x 1.28" 2. Mounting Hole: 44.5 x 95.3 (mm) 3. Connectors: AC input: JST B2P3-VH or equivalent 50.8 (2") DC output: JST 710--VH04 Fan: Molex 5045-02A or equivalent 4. Output Pin assignment: Function Pin assignment: TB3 1 2 3 4 Function FAN Output Vo Vo GND GND Pin 1 GND 2 +12V 5. Packing: Net weight: 160 g approx. / unit Gross weight: 10 kg approx. / carton, 80 units / carton 32.0 max. (1.28") Carton size (mm): 422 (L) x 412 (W) x 287 (H) -Hui- 10 years Warranty (contact Skynet's Distributors for details) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: ** This data sheet is only for models selection. For business, en Click below for more details, to buy on-line or request volume pricing: gineering specification by model must be used. (866) 588-1750 JUL. 2014 4-1 (866) 588-1750 power@sager .com http://power.sager.com/skynet-SNP-G12-power-supply.html sales@powergatellc.com http://www.powergatellc.com/skynet-snp-g12-power-supply.html h t t p: / / pow e r. sa ge r. c om ww w. po w ergatellc . c o m