CINT1150 SL POWER 150W Single Output CINT1150 SERIES 150 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30”” Features  2” x 4” x 1.3” Package  For 1U Applications  150W w/air, 100W convection cooled  Universal Input 90-264 VAC  Power Fail/Output Good Signal  Approved to CSA/EN/IEC/UL60950, 2nd Edition  3 Year Warranty  RoHS Compliant Description The CINT1150 family is the latest offering in high density single output open-frame AC/DC power supplies. Approved to EN/IEC/UL60950-1, 2nd edition, the CINT1150 family is ideal for lighting, industrial printers, gaming equipment, and many other applications where power density and cost are critical. The CINT1150 operates at universal input range of 90 to 264Vac and wide temperature range -10°C to +70°C, delivering full rated output power up to +50°C. In addition, these models feature Power Fail and DC OK signals. Model Selection Model Output Current Ripple & Total OVP Number Volts w/200LFM air Convection* Noise** Regulation Threshold*** CINT1150A1206K01 12V 12.5A 8.33A 0.5%RMS, 1.2% pk-pk ±5% 14.0 ± 1.1V CINT1150A2406K01 24V 6.25A 4.17A 0.5%RMS, 1.0% pk-pk ±5% 28.0 ± 2.5V CINT1150A4806K01 48V 3.13A 2.08A 0.5%RMS, 1.0% pk-pk ±5% 55.0 ± 4.0V CINT1150A5606K01 56V 2.68A 1.79A 0.5%RMS, 1.0% pk-pk ±5% <59.9V Notes: * Maximum output power is 95 Watts for input voltage of 90-105VAC at 50°C convection. For input voltage of 105Vac or more, the total power is 100 Watts at 50°C convection. ** Measured with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR capacitors. General Specifications Less than 2 sec. @115Vac (inversely 100-240Vac, ±10%, 47-63Hz, 1∅ AC Input Turn On Time proportional to input voltage and thermistor 120–370Vdc temperature) Input Current 115Vac: 2A, 230Vac: 1A Hold-up Time >12mS at full load, 120Vac 264Vac, cold start: will not exceed 50A AC Power Fail, DC OK Inrush Current Signals F1, F2: 4A, 250Vac fuses provided on all Overload Hiccup Mode Input Fuses models Protection Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.slpower.com CINT1150 REV 2.7, 11-JUNE-13 1 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1150-power-supply.html http://power.sager.com CINT1150 SL POWER 150W Single Output CINT1150 SERIES 150 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30”” General Specifications (continued) Earth Leakage Short Circuit Provided - no damage will occur if the output <750A@264Vac, 60Hz, NC is shorted. Hiccup Mode Current Protection OVP firing reduces output voltage to <50% Overvoltage 88% typical at 115Vac of nominal in <50mS. See chart for trip Efficiency Protection range. 150W continuous with 200 lfm airflow, 100W PFC: Variable 30-400kHz. Output Power convection cooled – See chart for specific Switching Frequency Main Converter: Variable 35-180kHz, 65- voltage model ratings. 70kHz at full load. Input-Output: 4000Vac Transient 50% load step. Δi/Δt: <0.2A/S Isolation Input-Ground: 1800Vac Response Max Volt Deviation = 3% Output-Ground: 500Vac Operating -10°C to +70°C Ripple and Noise See chart -40C Start Up Temperature Temperature Derate output power linearly above 50°C to See chart Output Voltage 50% at 70°C Derating Voltage +/-5% from nominal S torage Temperature -40°C to +85°C Adjustability Operating: -500 to 10,000 ft Minimum Load Not required Altitude Non-operating: -500 to 40,000 ft. Total Regulation +/- 5%. See chart Relative Humidity 5% to 95%, non-condensing Operating: 0.003g/Hz, 1.5grms overall, 3 Operating: Half-sine, 20gpk, 10ms, 3 axes, 6 axes, 10 min/axis shocks total Vibration Shock Non-Operating: 0.026g2/Hz, 5.0grms overall, Non-Operating: Half-sine, 40 gpk, 10 ms, 3 3 axes, 1 hr/axis axes, 6 shocks total Dimensions W: 2.0” x L: 4.0” x H: 1.3” Safety Standards EN/CSA/UL/IEC60950-1, 2nd Edition 640,000 hours at 100W convection, 183g Weight MTBF 1,500,000 hours at 150W with 200LFM air Auxiliary Signals Goes LOW with 5 mS warning before loss AC Power Fail: During normal operations, stays HIGH. Power Fail: of output power due to AC failure Open collector logic signal goes and stays HIGH DC OK: 100mS to 500mS after main output reaches regulation. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.slpower.com CINT1150 REV 2.7, 11-JUNE-13 2 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1150-power-supply.html http://power.sager.com CINT1150 SL POWER 150W Single Output CINT1150 SERIES 150 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30”” EMI/EMC Compliance Conducted Emissions EN55011/22 Class B, FCC Part 15, Subpart B, Class B Radiated Emissions EN55011/22 Class A, FCC Part 15, Subpart B, Class A w/6db margin Static Discharge Immunity EN61000-4-2, Criteria A, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. Criteria A EFT/Burst Immunity EN61000-4-4, 2kV/5kHz, Criteria A Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode, Criteria A Conducted RF Immunity EN61000-4-6, 3Vrms, Criteria A Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m, Criteria A EN61000-4-11, 0% Vin, 0.5cycle; 40% Vin, 5 cycles; 70% Vin, 25 cycles; Voltage Dip Immunity Criteria A Line Harmonic Emissions EN61000-3-2, Class A, B, C, & D Flicker Test EN61000-3-3, Complies (dmax<6%) Mechanical Drawing Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: www.slpower.com CINT1150 REV 2.7, 11-JUNE-13 (866) 588-1750 3 power@sager .com http://power.sager.com/sl-power-CINT1150-power-supply.html http://power.sager.com CINT1150 SL POWER 150W Single Output CINT1150 SERIES 150 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30”” Connector Information Input Connector Ground DC Output Connector Signal Connector J100 J101 J200 J300 PIN 1) AC LINE PIN 1) +Vout PIN 4) -Vout PIN 1) PF/DC OK PIN 2) EMPTY 0.187” FASTON TAB PIN 2) +Vout PIN 5) -Vout PIN 2) Common PIN 3) AC NEUTRAL PIN 3) +Vout PIN 6) -Vout Mating Connector: Mating Connector: Mating Connector: Mating Connector: Molex 09-50-3031 AMP 640250-6 Molex 1375820-2 Molex 01-90020009 Pins= 08-52-0072 Pins = 640252-1 Pins = 1375819 Power Fail/DC OK Signals – J300 J300–Pin 1 J300 – Pin 2 AC POWER FAIL SIGNAL DC OK SIGNAL Isolation Specifications Parameter Conditions/Description Min Nom Max Units Input/Ground Basic Input/Output Reinforced Insulation Safety Rating Output/Ground n/a Input/Ground 1800 Vac Input/Output 4000 Vac Electric Strength Test Voltage - - Output/Ground 500 Vac Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: www.slpower.com CINT1150 REV 2.7, 11-JUNE-13 4 (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1150-power-supply.html http://power.sager.com CINT1150 SL POWER 150W Single Output CINT1150 SERIES 150 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30”” Input Specifications All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted. Parameter Conditions/Description Min Nom Max Units Input Voltage 90 115/230 264 Vac Turn-On Input Voltage Ramping up 82.7 Vac Turn-Off Input Voltage Ramping down 67.0 Vac Input Frequency 47 50/60 63 Hz Inrush Current Limitation 264Vac, cold start - - 50 A Power Factor Vi Io 0.9 - - nom, nom Vi Io nom, nom CINT1150A1206K01 CINT1150A2406K01 Efficiency 88% - % - CINT1150A4806K01 CINT1150A5606K01 Protection All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted Parameter Conditions/Description Min Nom Max Units Input Fuse Not user accessible Input Transient Protection 2KV(CM) and 1KV(DM) surge 2 KV (CM) No-load Hiccup Mode Output Short Circuit Hiccup Mode Overload Hiccup Mode Overvoltage Protection Latch style See Models chart for trip ranges Over temperature Protection Automatic power shutdown at TC =155°C Characteristic Curves Output vs. Temperature 100W convection cooled and 150W continuous with 200 LFM airflow, Derating output power to 50% at 70°C. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: www.slpower.com CINT1150 REV 2.7, 11-JUNE-13 (866) 588-1750 5 power@sager .com http://power.sager.com/sl-power-CINT1150-power-supply.html http://power.sager.com CINT115 SL POWER 0 CINT1150 SERIES 150W Single Output 150 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30”” Efficiency vs. Loading The high efficiency is achieved by using LLC technology, PFC topology minimizing switching losses. Synchronous SCHOTTKY or ultra-fast diode is used as rectifier in CINT1150 family because of high output voltage level. Ripple & Noise To verify that the output ripple and noise does not exceed the level specified in the product specification. Measured using a scope probe socket with 0.1uF ceramic and a 10uF electrolytic capacitor connected in parallel across it, 20MHz BW. 24V OUT, NO LOAD, 90VAC, 60HZ 24V OUT, FULL LOAD, 90VAC, 60HZ 24V OUT, NO LOAD, 264VAC, 50HZ 24V OUT, FULL LOAD, 264VAC, 50HZ www.slpower.com CINT1150 REV 2.7, 11-JUNE-13 6 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1150-power-supply.html http://power.sager.com CINT1150 SL POWER 150W Single Output CINT1150 SERIES 150 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30”” Output Transient Response 50% load step within the regulation limits of minimum and maximum load, dI/dt< 0.2A/Sec. Recovery time not specified as there is no laps in regulation with a 50% Load Step. Maximum voltage deviation is 3%, This test is performed on the MAIN OUTPUT ONLY. 24V OUT, 120VAC, 25% TO 75% LOAD STEP 24V OUT, 240VAC, 25% TO 75% LOAD STEP Output Overload Characteristic Supply shall protect itself against Overload conditions. The Power Supply shall recover from Overload Conditions without operator intervention. 24V OUT, 90VAC 24V OUT, 264VAC Short Circuit Protection Supply shall protect itself against Short Circuit conditions. No damage will occur if the output is shorted.. 24V OUT, 90VAC 24V OUT, 264VAC Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.slpower.com CINT1150 REV 2.7, 11-JUNE-13 7 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1150-power-supply.html http://power.sager.com CINT1150 SL POWER 150W Single Output CINT1150 SERIES 150 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30”” Overvoltage Protection OVP firing reduces output voltage to <50% of nominal in <50ms. See models chart for trip ranges. 24V OUT, NO LOAD 24V OUT, FULL LOAD Turn On Time 90VAC, FULL LOAD 264VAC, FULL LOAD Hold Up Time 120VAC, FULL LOAD Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Click below for more details, to buy on-line or request volume pricing: www.slpower.com CINT1150 REV 2.7, 11-JUNE-13 (866) 588-1750 8 power@sager .com http://power.sager.com/sl-power-CINT1150-power-supply.html http://power.sager.com