CINT1175 SL POWER 175W Single Output CINT1175 SERIES 175 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30” Features  2” x 4” x 1.3” Package  For 1U Applications  175W w/air, 120W convection cooled  Universal Input 90-264 VAC  Average Efficiency meets Level V Requirements  Approved to CSA/EN/IEC/UL60950, 2nd Edition  12V fan output  Efficiency 90% typical at Full Load  3 Year Warranty  RoHS Compliant Description A highly dense 175Watts AC to DC power supply designed for industrial and ITE applications. With convection rating of 120 Watts, CINT1175 family leads the market in power density and low leakage makes it a perfect solution for lighting applications. With input & output monitoring alarms plus isolated 12V/0.4A fan, it is one the most feature rich supplies and can easily fit in 1U chassis. All 5 models are CE marked to low voltage directive and approved to ITE standards of EN60950, 2nd edition. Model Selection Model Output Current Ripple & Total OVP*** Number Volts w/200LFM air Convection Fan Output Noise** Regulation Threshold*** 0.5%RMS, CINT1175A1206K01 12V 14.6A 10.0A 12Vdc/04.A ±3% 14.0 ± 1.1V 1.2% pk-pk 0.5%RMS, CINT1175A1506K01 15V 11.7A 8.0A 12Vdc/04.A ±3% 18.5 ± 1.5V 1.0% pk-pk 0.5%RMS, CINT1175A2406K01 24V 7.3A 5.0A 12Vdc/04.A ±3% 28.0 ± 2.5V 1.2% pk-pk 0.5%RMS, CINT1175A4806K01 48V 3.6A 2.5A 12Vdc/04.A ±3% 55.0 ± 4.0V 1.0% pk-pk 0.5%RMS, CINT1175A5606K01 56V 3.1A 2.1A 12Vdc/04.A ±3% 59.0 ± 1.0V 1.0% pk-pk Notes: * Total convection power is 120 Watts. ** Measured with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR capacitors. *** Output adjustment on 56V model will not exceed 56.2 volts. General Specifications Less than 2 sec. @115Vac (inversely 100-240Vac, ±10%, 47-63Hz, 1∅ AC Input Turn On Time proportional to input voltage and thermistor 120–370Vdc temperature) Input Current 115Vac: 2A, 230Vac: 1A Hold-up Time 16mS, typical Inrush Current 264Vac, cold start: will not exceed 50A Signals AC Power Fail, DC OK Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.slpower.com CINT1175 REV 5.4, 6 April-15 1 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1175-power-supply.html http://power.sager.com CINT1175 SL POWER 175W Single Output CINT1175 SERIES 175 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30” General Specifications (continued) Input Fuse 4A, 250VAC fuse provided on all models Overload Protection Hiccup Mode Earth Leakage Short Circuit Provided - no damage will occur if the output <350A@264Vac, 60Hz, NC is shorted. Current Protection OVP firing reduces output voltage to <50% Overvoltage 90% typical at 115Vac of nominal in <50ms. See chart for trip Efficiency Protection range. 175W continuous, with 200 lfm airflow, 120W Output Power convection cooled – See chart for specific Switching Frequency PFC: 65kHz typical voltage model ratings. Input-Output: 4000Vac Transient 50% load step. Δi/Δt: <0.2A/S Isolation Input-Ground: 1800Vac Max Volt Deviation = 3% Response Output-Ground: 1500Vac Operating -10°C to +70°C Ripple and Noise See chart Temperature Start Up at -40°C, full load Temperature Derate output power linearly above 50°C to Output Voltage See chart Derating 50% at 70°C Voltage +/-5% from nominal S torage Temperature -40°C to +85°C Adjustability Operating: -500 to 10,000 ft. Minimum Load Not required Altitude Non-operating: -500 to 40,000 ft. +/- 3%. See chart 5% to 95%, non-condensing Total Regulation Relative Humidity Operating: 0.003g/Hz, 1.5grms overall, 3 Operating: Half-sine, 20gpk, 10ms, 3 axes, 6 axes, 10 min/axis shocks total Vibration Shock Non-Operating: 0.026g2/Hz, 5.0grms overall, Non-Operating: Half-sine, 40 gpk, 10 ms, 3 3 axes, 1 hr/axis axes, 6 shocks total Dimensions W: 2.0” x L: 4.0” x H: 1.3” Safety Standards EN/CSA/UL/IEC 60950-1, 2nd Edition 331,105 hours, 175W load, 110Vac input, Weight 210g MTBF 25°C ambient Auxiliary Signals During normal operations, stays HIGH. Signal Open collector logic signal goes and stays HIGH AC Power Fail: goes LOW with 5mS warning before loss of DC OK: 100mS to 500mS after main output reaches DC output from AC failure. regulation. Connect to inhibit pin to output common to Inhibit: inhibit the DC output. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: www.slpower.com CINT1175 REV 5.4, 6 April-15 2 (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1175-power-supply.html http://power.sager.com CINT1175 SL POWER 175W Single Output CINT1175 SERIES 175 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30” EMI / EMC Compliance Conducted Emissions EN55011/22 Class B, FCC Part 15, Subpart B, Class B Radiated Emissions EN55011/22 Class A, FCC Part 15, Subpart B, Class A w/6db margin Static Discharge Immunity EN61000-4-2, Criteria A, 6kV Contact Discharge, 8kV air discharge EN61000-4-3, 3V/m. Criteria A Radiated RF Immunity EFT/Burst Immunity EN61000-4-4, 2kV/5kHz, Criteria A Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode, Criteria A Conducted RF Immunity EN61000-4-6, 3Vrms, Criteria A EN61000-4-8, 3A/m, Criteria A Power Frequency Magnetic Field Immunity EN61000-4-11, 0% Vin, 0.5cycle; 40% Vin, 5 cycles; 70% Vin, 25 cycles; Voltage Dip Immunity Criteria A Line Harmonic Emissions EN61000-3-2, Class A, B, C, & D Flicker Test EN61000-3-3, Complies (dmax<6%) Mechanical Drawing When installing the power supply into the end-product, a non-conductive Insulator should be placed between the unit and any conductive metal chassis or mounting platform. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.slpower.com CINT1175 REV 5.4, 6 April-15 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1175-power-supply.html http://power.sager.com CINT1175 SL POWER 175W Single Output CINT1175 SERIES 175 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30” Connector Information Input Connector Ground DC Output Connector Fan Output Connector Signal Connector J100 J101 J300 J500 J600 PIN 1) AC LINE PIN 1) +Vout PIN 4) -Vout PIN 1) Inhibit PIN 1) +12Vfan PIN 2) EMPTY .187 x .032 FASTON TAB PIN 2) +Vout PIN 5) -Vout PIN 2) PF/DC OK PIN 2) RTN PIN 3) AC NEUTRAL PIN 3) +Vout PIN 6) -Vout PIN 3, 4) Common Mating Connector: Mating Connector: Mating Connector: Mating Connector: Mating Connector: Molex 09-50-3031 AMP 640250-6 Molex 1375820-2 Molex 1375820-4 Molex 01-90020009 Pins= 08-52-0072 Pins = 640252-1 Pins = 1375819 Pins = 1375819 Fan Output – J500 J500 provides a 12V@0.4mA output to support a system cooling fan. The fan output is always available when AC input is present, so it also can be used for a 12V standby output is so desired. AC Power Failure/DC OK and Inhibit Signals – J600 Timing Sequence www.slpower.com CINT1175 REV 5.4, 6 April-15 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1175-power-supply.html http://power.sager.com SL POWER CINT1175 CINT1175 SERIES 175W Single Output 175 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30” Isolation Specifications Parameter Conditions/Description Min Nom Max Units Input/Ground Basic Input/Output Reinforced Insulation Safety Rating Output/Ground n/a Input/Ground 1800 Vac Input/Output 4000 Vac Electric Strength Test Voltage - - Output/Ground 1500 Vac Input Specifications All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted. Parameter Conditions/Description Min Nom Max Units Input Voltage 90 115/230 264 Vac Turn-On Input Voltage Ramping up 82.7 Vac Turn-Off Input Voltage Ramping down 67.0 Vac Input Frequency 47 50/60 63 Hz Inrush Current Limitation 264Vac, cold start - - 50 A Power Factor Vi Io 0.9 - - nom, nom Vi Io nom, nom CINT1175A1206K01 CINT1175A1506K01 Efficiency 90% - % - CINT1175A2406K01 CINT1175A4806K01 CINT1175A5606K01 Output Specifications Parameter Conditions/Description Min Nom Max Units Output Voltage Setpoint Accuracy Vi nom,, Io1 @ ADC, TC = 25 °C -3 - 3 % Vo nom CINT1175A1206K01 Output Voltage Setpoint Accuracy Vi , Io1 @ ADC, TC = 25 °C -3 - 3 % Vo nom nom, CINT1175A1506K01 Output Voltage Setpoint Accuracy Vi , Io1 @ ADC, TC = 25 °C -3 - 3 % Vo nom nom, CINT1175A2406K01 Output Voltage Setpoint Accuracy Vi , Io1 @ ADC, TC = 25 °C -3 - 3 % Vo nom nom, CINT1175A4806K01 Output Voltage Setpoint Accuracy Vi , Io1 @ ADC, TC = 25 °C -3 - 3 % Vo nom nom, CINT1175A5606K01 ADC Output Current V1 0 10.0 14.6 CINT1175A1206K01 Output Current V2 0 - 0.4 ADC Output Current V1 0 8.0 11.7 ADC CINT1175A1506K01 Output Current V2 0 - 0.4 ADC Output Current V1 0 5.0 7.3 ADC CINT1175A2406K01 Output Current V2 0 - 0.4 ADC ADC Output Current V1 0 2.5 3.6 CINT1175A4806K01 Output Current V2 0 - 0.4 ADC ADC Output Current V1 0 2.1 3.1 CINT1175A5606K01 Output Current V2 0 - 0.4 ADC Static Line Regulation V1 Vi min-Vi max, Vi 0-100% Io nom -1 - 1 % Vo nom nom, Static Load Regulation V1 Vi min-Vi max, Vi 0-100% Io nom -3 - 3 % Vo nom nom, (Droop Characteristic) www.slpower.com CINT1175 REV 5.4, 6 April-15 5 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1175-power-supply.html http://power.sager.com CINT117 SL POWER 5 CINT1175 SERIES 175W Single Output 175 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30” Output Specifications (continued) Parameter Conditions/Description Min Nom Max Units Hold-Up Time Starting at Vi = 230 VAC, Po nom - 16 - ms Load change =50%, di/dt =0.2A/S Dynamic Load Regulation 0 3 % Vo nom voltage deviation 3% Start-Up Time Vi Io nom 0 - 2 s nom, Protection All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted Parameter Conditions/Description Min Nom Max Units Input Fuse Not user accessible Input Transient Protection 2KV(CM) and 1KV(DM) surge 2 KV (CM) No-load and short circuit proof Hiccup or Latch Output short circuit proof Hiccup or Latch overload (latch style) Hiccup Overvoltage Protection Latch style Latch Over temperature Protection Automatic power shutdown at TC =155°C Characteristic Curves Output vs. Temperature 120W convection cooled and 175W continuous with 200 LFM airflow, Derating output power to 50% at 70°C. www.slpower.com CINT1175 REV 5.4, 6 April-15 6 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1175-power-supply.html http://power.sager.com CINT1175 SL POWER 175W Single Output CINT1175 SERIES 175 Watt Power Supply Industrial Series Measures: 4.00 x 2.00 x 1.30” Efficiency vs. Loading The high efficiency is achieved by using LLC technology, PFC topology minimizing switching losses. Synchronous SCHOTTKY or ultra-fast diode is used as rectifier in CINT1175 family because of high output voltage level. Noise & Ripple To verify that the output ripple and noise does not exceed the level specified in the product specification. Measured using a scope probe socket with 0.1uF ceramic and a 10uF electrolysis capacitor connected in parallel across it, BW limit with 20MHz. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.slpower.com CINT1175 REV 5.4, 6 April-15 7 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1175-power-supply.html http://power.sager.com CINT1175 SL POWER 175W Single Output CINT1175 SERIES Indust175 W rial S att P eri ower Supply es Measures: 4.00 x 2.00 x 1.30” Output Transient Response 50% load step within the regulation limits of minimum and maximum load, dI/dt< 0.2A/Sec. Recovery time not specified as there is no laps in regulation with a 50% Load Step. Maximum voltage deviation is 3%, This test is performed on the MAIN OUTPUT ONLY. Output Overload Characteristic Supply shall protect itself against Overload conditions. The Power Supply shall recover from Overload Conditions without operator intervention. Output Overshoot When supply is turned on, off or when the load is stepped 100%, the Power Supply Overshoot/Undershoot shall not exceed minimum or maximum of output voltage regulation. www.slpower.com CINT1175 REV 5.4, 6 April-15 8 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-CINT1175-power-supply.html http://power.sager.com