CINT1200 200W Single Output Industrial Series Features
3” x 5” x 1.3” Package
200W with 100LFM Air
180W Convection Cooled
Class B Conducted EMI
Fits 1U Applications
Universal Input 90-264 Vac nd
Approved to CSA/EN/IEC/UL60950-1, 2 Edition
Efficiency 90% typical
3 Year Warranty
RoHS Compliant Description A power-packed, highly efficient AC to DC power supply designed for industrial and ITE applications. These models provide 180 Watts convection cooled, 200 Watts with moving air. The small heat footprint allows simple thermal design of systems which use this product. All models are CE marked to low voltage directive and approved to ITE standards of EN60950-1, 2nd edition. Model Selection Model Output Current Minimum Ripple & Total OVP Number Volts w/100LFM air Convection* Load Noise** Regulation Threshold*** CINT1200A1275K01 12V 16.7A 15.0A 0A 120mV pk-pk ±3% 14.0 ± 1.1V CINT1200A1575K01 15V 13.3A 12.0A 0A 150mV pk-pk ±3% 18.5 ± 1.2V CINT1200A1875K01 18V 11.1A 10.0A 0A 180mV pk-pk ±3% 21.5 ± 2.0V CINT1200A2475K01 24V 8.33A 7.50A 0A 240mV pk-pk ±3% 29.0 ± 2.5V CINT1200A2875K01 28V 7.14A 6.40A 0A 280mV pk-pk ±3% 33.5 ± 2.5V CINT1200A3275K01 32V 6.25A 5.62A 0A 320mV pk-pk ±3% 36.0 ± 3.0V CINT1200A3675K01 36V 5.55A 5.00A 0A 360mV pk-pk 41.0 ± 3.0V ±3% CINT1200A4875K01 48V 4.17A 3.75A 0A 480mV pk-pk ±3% 56.0 ± 3.0V Notes: * Total convection power is 180 Watts. ** Measured with noise probe directly across output terminals, and load terminated with 0.1μF ceramic and 10μF low ESR capacitors. General Specifications 100-240Vac, ±10%, 47-63Hz, 1∅ Less than 3 sec. @115Vac, Full Load AC Input Turn On Time 120–370Vdc Input Current 115Vac: 1.8A, 230Vac: 0.9A Hold-up Time 16mS at 200W, 120Vac/60Hz www.slpower.com CINT1200 REV 1.4 12-JUNE-13 1 CINT1200 200W Single Output Industrial Series Specifications (continued) Sensing transformer temperature, 165°C at Overtemperature Inrush Current 264Vac, cold start: will not exceed 55A full load, latching type, requires input power Protection recycling to reset. F1, F2: 3.15A, 250Vac fuses provided on all Input Fuses Overload Protection 120 to 150% of rating, Hiccup Mode models Earth Leakage Short Circuit <500μA@264Vac, 60Hz, NC; <1mA SFC Hiccup Mode, auto recovery. Current Protection Overvoltage Efficiency 88% typical OVP latch, see models chart for trip range. Protection 200W continuous, with 100 lfm airflow, 180W PFC: Fixed, 65kHz Output Power convection cooled – See chart for specific Switching Frequency Main Converter: Variable 35-200kHz, 65- voltage model ratings. 70kHz at full load. 500µS typical, return to 0.5% of nominal, 50% Input-Output: 4000Vac Transient Isolation Input-Ground: 1800Vac load step. Δi/Δt: <0.2A/μS. Max Voltage Response Output-Ground: 1500Vac Deviation = 3% Operating -10°C to +70°C Ripple and Noise 0.5%rms, 1% pk-pk, see chart. Temperature Start Up at -40°C, full load Temperature Derate output power linearly above 50°C to Output Voltage See chart 50% at 70°C Derating Voltage Fixed Output -40°C to +85°C Storage Temperature Adjustability Operating: -500 to 10,000 ft. Minimum Load Not required Altitude Non-operating: -500 to 40,000 ft. Total Regulation +/- 3% combined line, load and initial setting. Relative Humidity 5% to 95%, non-condensing Operating: 0.003g²/Hz, 1.5grms overall, 3 Operating: Half-sine, 20gpk, 10ms, 3 axes, 6 axes, 10 min/axis shocks total Vibration Shock Non-Operating: 0.026g²/Hz, 5.0grms overall, Non-Operating: Half-sine, 40 gpk, 10 ms, 3 3 axes, 1 hr/axis axes, 6 shocks total W: 3.0” x L: 5.0” x H: 1.3” EN/CSA/UL/IEC 60950-1, 2nd Edition Dimensions Safety Standards Weight 325g MTBF 401,000 hours, 25°C, 110Vac Output vs. Temperature Derating Curve 180W convection cooled and 200W continuous with 100 LFM airflow, derate output power to 50% at 70°C. www.slpower.com CINT1200 REV 1.4 12-JUNE-13 2 CINT1200 200W Single Output Industrial Series EMI/EMC Compliance Conducted Emissions EN55011/22 Class B, FCC Part 15, Subpart B, Class B EN55011/22 Class A, FCC Part 15, Subpart B, Class A w/6db margin Radiated Emissions EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Static Discharge Immunity Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m EN61000-4-11, 100%, 10ms; 30%, 275ms; 60%, 100ms; Performance Voltage Dip Immunity Criteria A, A, & A at 70% load. EN61000-3-2, Class A, B, C, & D Line Harmonic Emissions Flicker Test EN61000-3-3, Complies (dmax<6%) Mechanical Drawing [4] x 0.156 4 PLCS Notes: 1. All dimensions in inches (mm), tolerance MTG is +/-0.000”. HOLES 2. Mounting holes should be grounded for EMI purposes. 3. FG is safety ground connection. 4. The power supply requires mounting on metal standoffs 0.20” (5mm) in height, min. Connector Information Input Connector Ground DC Output Connector J100 (FG) J300 PIN 1) AC LINE Term. 1,2,3: RTN PIN 2) EMPTY 0.25” FASTON TAB Term. 4,5,6: +Vout PIN 3) AC NEUTRAL Mating Connector: Mating Connector: Mating Connector: AMP Molex 640250-3 AMP 640250-6 Molex 190020001 Pins: 640252-2 Pins: 640252-2 Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com CINT1200 REV 1.4 12-JUNE-13 3