SL POWER GNT400 SERIES 400 Watt Power Supply GNT400 Measures: 7.00 x 4.00 x 1.50” Front End Series 400W AC/DC Universal Input Medical & ITE Power Supply 2 Year Warranty •Medical (EN60601-1) and ITE (EN60950) Certifications •Compact 4” x 7” x 1.5” U Channel (1U compatible) •9.5 W/in³ •100-240 VAC Input with Active PFC •12 to 48 V DC Output at 400W (300W convection rating) •5 Vdc, 100 mA Standby Output •12 Vdc Fan Output •Approved to UL, CSA, and EN/IEC Standards •Less than 100A leakage •Compliance to EN55011/22 Conducted Noise, Class B •RoHS Compliant – Category 6 Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input 100-240VAC, 50/60 Hz, 1∅. 90-270VAC, 45-65 Hz max Turn On Time 500 ms max Input Current 120VAC: 4.2A. 230VAC: 2.1A Hold-up Time 20 ms at 400W Inrush Current Active Circuit, 37A max. peak Over/Undershoot 3.5% max Input Fuses F1 and F2, 6.3A/250V for line and neutral Overload Protection Cycling type, 470W typical Power Factor 0.99 typical, 0.96 minimum Overvoltage Protection See chart Earth Leakage Current 100A at 120VAC, 60 Hz Normal Ripple and Noise 1% pk-pk max., 20MHz BW 400A at 264VAC, 50 Hz, SFC 0.1F and 10 F caps on probe Output Power 400W continuous with 200lfm airflow ITE Safety Standards CSA/EN/IEC/UL 60950-1 See chart for convection ratings Peak Output Power 450W for 1 minute, 10% duty cycle Medical Safety Standards EN/IEC/UL 60601-1, CSA22.2 No. 601-1 Output Voltage See chart Thermal Considerations Keeping the following components below these temp. indicates sufficient cooling: T5: 90°C max., T1: 100°C max Voltage Adjustability ±5% minimum Switching Frequency Output: 170kHz ±8kHz, PFC: 140kHz ±8kHz Minimum Load Not required MTBF 300K hours per Telcordia Total Regulation See chart Overtemperature Protection Automatic Transient Response 500s to 1%, 50% load step, i/t < 0.2A/s Ef fic ie n c y 91% typical at 230VAC Maximum voltage deviation is 3.5% 88% typical at 120VAC Remote Sense Compensates for up to 500mV voltage drop Temperature Coefficient 0.03% per °C typical on all units Model Number Key GNT 4 XX X X X G RoHS Compliant Cover Options: Blank = Standard Mini Cover, "E" = Cover w ith fan on the end, "T" = Cover w ith fan on top Output Connections: "B" = Busbars, "T" = Phoenix P/N 1731721 Input Connections: "A" = EBY P/N 5002-03-N-12, "B" = Phoenix P/N 1732034, "C" = AMP P/N 540445-5 (pins 2 & 4 Output Voltage: (See models chart below ) Output Power (Watts): "4" = 400W Product Family ______________________________________________________________________________________________________________________________ 1 of 4 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-GNT400-power-supply.html http://power.sager.com SL POWER GNT400 GNT400 SERIES 400 Watt Power Supply Front End Series 400W AC/DC Measures: 7.00 x 4.00 x 1.50” Universal Input Medical & ITE Power Supply 2 Year Warranty Model Volts (V)  Output Current  Ripple Total OVP Number Convection Fan Cooled & Noise Regulation Threshold GNT412ABG 12V 25.0A 33.3A 120mV ±2% 14.0 ± 1V GNT415ABG 15V 20.0A 26.7A 150mV ±2% 17.6 ± 1V GNT418ABG 18V 16.7A 22.2A 180mV ±2% 20.8 ± 1V GNT424ABG 24V 12.5A 16.7A 240mV ±2% 26.5 ± 1V GNT428ABG 28V 10.7A 14.3A 280mV ±2% 32.0 ± 1V GNT436ABG 36V 8.3A 11.1A 360mV ±2% 39.0 ± 1V GNT448ABG 48V 6.3A 8.4A 480mV ±2% 55.0 ± 2V Notes: 1. When the input voltage is <90Vac, derate output power to 300W fan cooled or 250W convection. 2. Using the T or E cover options allows for 400W continuous operation up to 40°C ambient. 3. For 400W at 50°C, use 100 lfm fan cooling. EMI/EMC Compliance Conducted Emissions EN55011/22 Class B Radiated Emissions EN55011/22 Class A Voltage Fluctuations EN61000-3-3, complies Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz.. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11 criteria A @ 250 Watts or less. Line Frequency Harmonics EN61000-3-2, Class A Environmental Specifications Auxiliary Outputs and Signals Operating Temperature 0 to 70°C (See chart) PS On Low to Inhibit PS Off TTL HI to Inhibit Storage temperature -40 to 85°C Operating Altitude -500 to 10,000 ft. Pwr OK HI when AC is OK, 100-200 msec delay Non-operating Altitude -500 to 40,000 ft. Pwr OK PF low – 4 msec warning Relative Humidity 5% to 95%, non-condensing DC OK HI when output is >95% of nominal Vibration 5 Hz – 500 Hz, 2.5g rms 5V Standby Output Always ON, up to 100mA Shock Per MIL-STD-810E, 516.4 part IV Fan Output 12Vdc @ 250mA (turns off during inhibit) GNT400 Output Power vs. Line Voltage & Temperature ______________________________________________________________________________________________________________________________ 2 of 4 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-GNT400-power-supply.html http://power.sager.com SL POWER GNT400 SERIES GNT400 400 Watt Power Supply Front End Series 400W AC/DC Measures: 7.00 x 4.00 x 1.50” Universal Input Medical & ITE Power Supply 2 Year Warranty Mounting Options ______________________________________________________________________________________________________________________________ 3 of 4 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-GNT400-power-supply.html http://power.sager.com SL POWER GNT400 SERIES GNT400 400 Watt Power Supply Measures: 7.00 x 4.00 x 1.50” Front End Series 400W AC/DC Universal Input Medical & ITE Power Supply 2 Year Warranty Mounting Options (continued) Data Sheet © 2010 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 8-27-2010 SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ 4 of 4 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-GNT400-power-supply.html http://power.sager.com