SL POWER LE150S24VN

LE150S-VN 150W Single Output LED Driver Series Features
High Efficiency (up to 93%)
Wide Range Universal Input 90-305 VAC
Active Power Factor Correction (0.99 typical)
Constant Voltage Output
Lightning Protection
Waterproof (IP67)
Overcurrent, Overvoltage, Overtemperature Protection
Meets UL8750, UL935 & EN61347 Safety
SELV
Minimum of 3 Year Warranty, Consult factory for 5 Years Description The LE150S-VN Series operate from a 90 ~ 305Vac input range. These units will provide up to a 150W of output power. They are designed to be highly efficient and highly reliable. The standard features include lightning protection, overvoltage protection, short circuit protection, and over temperature protection. Model Selection Model Output Output Efficiency* Ripple & Regulation Overvoltage Number Current Voltage 110Vac 220Vac Noise** Line Load Trip Level LE150S24VN 0 – 6.25A 24Vdc 89%-90% 92%-93% 2% of Vo pk-pk ±1% ±2% 110% - 130% of Vo LE150S48VN 0 – 3.13A 48Vdc 89%-90% 92%-93% 2% of Vo pk-pk ±1% ±2% 110% - 130% of Vo Notes: 1. Efficiency measured at full load, at input voltage noted. 2. Measured at 20MHz bandwidth, with noise probe directly across output terminals, and load terminated with 0.1μF ceramic and 10μF low ESR electrolytic capacitors. General Specifications AC Input 90-305Vac, 47-63Hz, 1∅ Turn On Time 1.5 seconds, max. Input Current 100Vac: 1.75A, 220Vac: 0.8A Hold-up Time 20 mSec Dimming Inrush Current 230Vac, cold start: will not exceed 65A N/A Function Overload Input Fuses XA, 250VAC fuses provided on all models 110%-180% of Io rated, Hiccup Mode Protection www.slpower.com LE150S-VN 15-APRIL-2013 1 LE150S-VN 150W Single Output LED Driver Series General Specifications (continued) Earth Leakage Short Circuit <1.0mA@277Vac, 50Hz Provided - no damage to unit, self-recovery. Current Protection Latch mode. AC input will need to be reset to Overvoltage Efficiency See Models chart. return to normal operation after an OVP Protection condition. See chart for trip range. Latch mode. AC input will need to be reset to Overtemperature 150W continuous return to normal operation after an OTP Output Power Protection condition. Trip Temperature = 110°C typical. Operating Operating: -35°C to +70°C Ripple and Noise See chart Temperature Non-operating: -40°C to +85°C 10% to 100% operating Output Voltage See chart Relative Humidity 5% to 100%, non-operating UL8750, UL935, UL1012, CSA-C22.2 No. 0, No. Total Regulation +/- 3%. See chart Safety Standards 107.1, & No. 250.0, EN61347-1, EN61347-2-13 261,000 hours (110Vac input, 80% load, 25°C Dimensions W: 3.13” x L: 9.37” x H: 1.81” MTBF ambient, per MIL-HDBK-217F). 78,000 hours (220Vac input, 80% load, 60°C Weight 1500g Lifetime case temperature). EMI/EMC Compliance Emissions EN55015, Radiated & Conducted EMI for Lighting Equipment EN61547 Static Discharge Immunity EN61000-4-2, 4kV Contact Discharge, 8kV air discharge EN61000-4-3 Radiated RF Immunity EFT/Burst Immunity EN61000-4-4 Line Surge Immunity EN61000-4-5, 4kV line-line, 6kV line-earth Conducted RF Immunity EN61000-4-6 Power Frequency Magnetic Field Immunity EN61000-4-8 Voltage Dip Immunity EN61000-4-11 EN61000-3-2 Line Harmonic Emissions EN61000-3-3 Flicker Test www.slpower.com LE150S-VN 15-APRIL-2013 2 LE150S-VN 150W Single Output LED Driver Series Derating Curves Mechanical Drawing Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com LE150S-VN 15-APRIL-2013 3