SL POWER LE200S70CD

SL POWER LE200S-CD LE200S 200W -CD SERIES Single Output 200 Watt LED Power Supply LED Driver Series Measures: 9.37 x 3.13 x 1.81” Features  High Efficiency (up to 93%)  Wide Range Universal Input 90-305 VAC  Active Power Factor Correction (0.99 typical)  Constant Current Output  Dimming Function  Lightning Protection  Waterproof (IP67)  Overcurrent, Overvoltage, Overtemperature Protection  Meets UL8750 & EN61347 Safety  Minimum of 3 Year Warranty, Consult factory for 5 Years Description The LE200S-CD Series operate from a 90 ~ 305Vac input range. These units will provide up to a 0.7A of output current and a maximum output voltage of 285Vdc for 200 W maximum output power. They are designed to be highly efficient and highly reliable. The standard features include dimming control, lightning protection, over voltage protection, short circuit protection, and over temperature protection. Model Selection Model Output Output Efficiency* Ripple & Regulation Overvoltage Number Current Voltage 110Vac 220Vac Noise** Line Load Trip Level LE200S70CD 665mA-735mA 143V – 285V 90%-91% 92%-93% 8.6V pk-pk max. ±1% ±3% 342V – 428V Notes: 1. Efficiency measured at full load, at input voltage noted. 2. Measured at 20MHz bandwidth, with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR electrolytic capacitors. General Specifications 1.0 seconds, max. AC Input 90-305Vac, 47-63Hz, 1∅ Turn On Time Overload Constant Current Input Current 100Vac: 2.4A, 220Vac: 1.2A Protection Dimming 1-10Vdc source or External Resistor can be Inrush Current 230Vac, cold start: will not exceed 65A used for dimming control. See below. Function XA, 250VAC fuses provided on all models Input Fuses www.slpower.com LE200S-CD 15-APRIL-13 1 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-le200s-cd-power-supply.html http://power.sager.com LE200S-CD SL POWER 200W Single Output LE200S-CD SERIES 200 Watt LED Power Supply LED Driver Series Measures: 9.37 x 3.13 x 1.81” General Specifications (continued) Earth Leakage Short Circuit <0.75mA@277Vac, 50Hz Provided - no damage to unit, self-recovery. Current Protection Latch mode. AC input will need to be reset to Overvoltage Efficiency See Models chart. return to normal operation after an OVP Protection condition. See chart for trip range. Latch mode. AC input will need to be reset to Overtemperature Output Power 200W continuous return to normal operation after an OTP Protection condition. Trip Temperature = 110°C typical. Operating Operating: -35°C to +70°C Ripple and Noise See chart Non-operating: -40°C to +85°C Temperature 10% to 100% operating Output Voltage See chart Relative Humidity 5% to 100%, non-operating UL8750, UL935, UL1012, CSA-C22.2 No. 107.1, Total Regulation +/- 3%. See chart Safety Standards EN61347-1, EN61347-2-13 330,000 hours (450mA model, 110Vac input, W: 3.13” x L: 9.37” x H: 1.81” Dimensions MTBF 80% load, 25°C ambient, per MIL-HDBK-217F). 90,000 hours (1400mA model, at 110Vac input, 1500g Weight Lifetime 80% load, 45°C ambient temperature). EMI/EMC Compliance Emissions EN55015, Radiated & Conducted with 6db of margin EMI for Lighting Equipment EN61547 EN61000-4-2, 4kV Contact Discharge, 8kV air discharge Static Discharge Immunity Radiated RF Immunity EN61000-4-3 EFT/Burst Immunity EN61000-4-4 EN61000-4-5, 4kV line-line, 6kV line-earth Line Surge Immunity Conducted RF Immunity EN61000-4-6 Power Frequency Magnetic Field Immunity EN61000-4-8 Voltage Dip Immunity EN61000-4-11 Line Harmonic Emissions EN61000-3-2 EN61000-3-3 Flicker Test Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.slpower.com LE200S-CD 15-APRIL-13 2 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-le200s-cd-power-supply.html http://power.sager.com LE200S-CD SL POWER 200W Single Output LE200S-CD SERIES LED Driver Series 200 Watt LED Power Supply Measures: 9.37 x 3.13 x 1.81” Derating Curves Mechanical Drawing www.slpower.com LE200S-CD 15-APRIL-13 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-le200s-cd-power-supply.html http://power.sager.com SL POWER LE200S-CD LE200S-CD SERIES 200W Single Output 200 Watt LED Power Supply LED Driver Series Measures: 9.37 x 3.13 x 1.81” Dimming Control The dimmer control may be operated from either a potentiometer or from an input signal of 1 – 10 Vdc. Two recommended implementations are provided below. Parameters: Parameter Min. Typ. Max. Notes Absolute Max. Voltage on the 1-10V input -2V - 12V Sink Current on the 1-10V input pin 0mA - 1mA LE200SXXXCD Dimming Configuration using External Voltage LE150SXXXCD Dimming Configuration using External Resistance Dimming Control Notes: 1. Io is actual output current and Ir is rated current without dimming control. 2. For the driver to operate properly, the load voltage must be maintained above the minimum voltage threshold (approx. 50% of the max. output voltage for any given model). 3. If the output voltage is maintained above 50% of the maximum output voltage, the dimming control may be operated over the entire 1-10V range with output current varying from 100% down to practically 10%. 4. The dimming signal is allowed to be less than 1V, however, when it for 0-1V, the output current is 10%Io. 5. Do not connect the GND of dimming to the output; otherwise, the LED driver can not work normally. Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. www.slpower.com LE200S-CD 15-APRIL-13 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-le200s-cd-power-supply.html http://power.sager.com