SL POWER LS15RB1201J04

LS15 Series Line Splitter PoE 1 Year Warranty • Power over Ethernet (PoE) • Converts POE to Separate Power and Data Lines • High Efficiency: 90%, 24V unit • Industry Leading Small Profile; 3”x 2.1”x 1” • Meets IEEE 802.3AF • Full Thermal Protection • Short Circuit & Overload Protection • Input Shutdown • UVLO / OVLO • Surge Protection International Safety Standard Approvals Specifications Output Specifications General Specifications Line and Load +/-1% V-out Efficiency In Midspan Measured from Data/Power Voltage Regulation configuration pins of RJ45 connector, to.output of std Switchcraft Transient Response 1% of V-out 712A conn. (50%-100% load deviation) 5V 87% min. Overvoltage Protection Transorb protected 12V 88% min. 24V 90% min. Output Connection Standard Switching Frequency 200kHz +/- 1% Output Noise 1% of V-out, 20MHz BW Recovery time 100Usec to 1% V-out (SR= 1a/10Usec) Input Specifications I-overload 120% ± 5% Input 36-57 Vdc Short Circuit Auto recovery when short is removed Input Current Reset power When Iin > 450mA for Overload Protection to start unit 75mSec, input latches off Thermal Shutdown Internally protected against over-temp conditions. Input Surge Transorb protected Approvals and TUV Pending Input Undervoltage Turn on 33-42Vdc Safety Standards Turn off 30-34Vdc Case and Dimension 3.0L x 2.1W x 1.0H (in) Weight 58g (2.05oz) Environmental Specifications Input Connector Standard RJ45 connector Operating temperature -40°C to +60°C Storage Temperature -40°C to +85°C Max ambient 60*C @ Full load operating Temp SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com LS15 Series Line Splitter For the most current data and application support visit www.slpower.com PoE Output Output Current Output Efficiency * Ault Part Number Voltage Per IEEE 802.3AF Power (with cable) LS15-05 5 V DC 2.00 A 10.0 W 480 mV LS15-12 12 V DC 0.90 A 10.8 W 480 mV LS15-24 24 V DC .475 A 11.4 W 480 mV Notes * Power limited per Input requirements of IEEE802.3af Table 33-12. I-port Max=350mA @V-port=37V./ I-port Max=260mA @V-port=57V Higher outputs available for non-compliant systems Outline Configuration 2 of 3 SL Power Electronics Corp. • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com LS15 Series Line Splitter PoE Data/Power in & Data Out Connection Power Out Connection 87654321 Standard RJ45 Jack Description Switchcraft RAPC 712A connector Configuration- For 802.3af compliant units or equivalent Pinout Code Center contact: positive Pin Mode A Mode B Suggested Mating Switchcraft 760 plug or equivalent 1 Pos Vport, Neg Vport 2 Pos Vport, Neg Vport 3 Neg Vport, Pos Vport 4 Pos Vport, Neg Vport 5 Pos Vport, Neg Vport 6 Neg Vport, Pos Vport 7 Neg Vport, Pos Vport 8 Neg Vport, Pos Vport Description 12”, 18AWG Cable w Switchcraft S760 connector or equivalent Pinout Code Center contact: positive Suggested Mating Switchcraft 722A plug or equivalent Description 12”, 18AWG Cable w Switchcraft 760 connector or equivalent Pinout Code Center contact: positive Suggested Mating Switchcraft 712A plug or equivalent 3 of 3 SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com Data Sheet © 2007 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev. 04/19/07