SL POWER ME10A0502B01

ME10 10W-12W Single Output External Power Medical Series Features  Meets UL/EN/IEC60601-1-2, 4th edition for * EMC  Approved to EN/IEC/UL60601-1, 3rd edition applications with and isolation levels which satisfy the 2 MOPP requirements  Meets DoE Efficiency Level VI Requirements  No load input power  Average Efficiency  Up to 12W of AC-DC Power  Universal Input 90-264Vac Input Range  Desktop and Wall-Plug versions  Meets EN55011/CISPR11, FCC Part 15.109 Class B Conducted & Radiated Emissions, with 6db margin  E-cap life of >7 years  <1,000,000 Hours MTBF  3 Year Warranty  IP22 Rated Enclosure LPS Description A high performance AC to DC external power supply family designed for medical applications. The ME10 Medical Series external AC-DC power supplies are approved to safety EN/IEC/UL60601-1, 3rd edition, with isolation levels which satisfy the 2 * MOPP requirements; and designed to UL/EN/IEC60601-1-2, 4th edition for EMC . The ME10 Series models will operate at universal input range of 90 to 264Vac over the wide temperature range of -20°C to +70°C, delivering full rated output power up to +40°C and applicable output power derating up to 70°C. These models are available in desktop and wall-plug versions, include an IP22 rating per IEC60529 for the enclosure, and output cable terminated at a variety of output connectors. *Consult Factory for Table 9 compliance information. Model Selection Model Output Output Ripple & Line Load Output Input Connector Configuration Number Volts Current Power Noise¹ Regulation Regulation ME10A0503F01 5.0V 2.0A 10W 75mV pk-pk ±1% ±5% ME10A0603F01 5.9V 1.6A 10W 75mV pk-pk ±1% ±5% ME10A0703F01 7.5V 1.3A 10W 75mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class I Desktop, ME10A0903F01 9.0V 1.1A 10W 90mV pk-pk ±1% ±5% Straight Barrel Type, IEC60320 C14 center positive Receptacle ME10A1203F01 12.0V 1.0A 12W 120mV pk-pk ±1% ±5% ME10A1503F01 15.0V 0.8A 12W 150mV pk-pk ±1% ±5% ME10A2403F01 24.0V 0.5A 12W 240mV pk-pk ±1% ±5% ME10A0503N01 5.0V 2.0A 10W 75mV pk-pk ±1% ±5% ME10A0603N01 5.9V 1.6A 10W 75mV pk-pk ±1% ±5% ME10A0703N01 7.5V 1.3A 10W 75mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class II Desktop, ME10A0903N01 9.0V 1.1A 10W 90mV pk-pk Straight Barrel Type, IEC60320 C8 ±1% ±5% center positive Receptacle ME10A1203N01 12.0V 1.0A 12W 120mV pk-pk ±1% ±5% ME10A1503N01 15.0V 0.8A 12W 150mV pk-pk ±1% ±5% ME10A2403N01 24.0V 0.5A 12W 240mV pk-pk ±1% ±5% ME10A0503Q01 5.0V 2.0A 10W 75mV pk-pk ±1% ±5% ME10A0603Q01 5.9V 1.6A 10W 75mV pk-pk ±1% ±5% ME10A0703Q01 7.5V 1.3A 10W 75mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class II Desktop, ME10A0903Q01 9.0V 1.1A 10W 90mV pk-pk Straight Barrel Type, IEC60320 C18 ±1% ±5% center positive Receptacle ME10A1203Q01 12.0V 1.0A 12W 120mV pk-pk ±1% ±5% ME10A1503Q01 15.0V 0.8A 12W 150mV pk-pk ±1% ±5% ME10A2403Q01 24.0V 0.5A 12W 240mV pk-pk ±1% ±5% www.slpower.com ME10 Rev 2.8 09-NOV-17 1 ME10 10W-12W Single Output External Power Medical Series Model Selection (continued) Model Output Output Ripple & Line Load Output Input Number Volts Current Power Noise¹ Regulation Regulation Connector Configuration ME10A0503B01 5.0V 2.0A 10W 75mV pk-pk ±1% ±5% ME10A0603B01 5.9V 1.6A 10W 75mV pk-pk ±1% ±5% Class II Wall-Plug, ME10A0703B01 7.5V 1.3A 10W 75mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Interchangeable ME10A0903B01 9.0V 1.1A 10W 90mV pk-pk ±1% ±5% Straight Barrel Type, Blades (North American center positive ME10A1203B01 12.0V 1.0A 12W 120mV pk-pk ±1% ±5% Blade included)² ME10A1503B01 15.0V 0.8A 12W 150mV pk-pk ±1% ±5% ME10A2403B01 24.0V 0.5A 12W 240mV pk-pk ±1% ±5% ME10A0503C01 5.0V 2.0A 10W 75mV pk-pk ±1% ±5% ME10A0603C01 5.9V 1.6A 10W 75mV pk-pk ±1% ±5% ME10A0703C01 7.5V 1.3A 10W 75mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class II Wall-Plug, ME10A0903C01 9.0V 1.1A 10W 90mV pk-pk ±1% ±5% Straight Barrel Type, Fixed North American center positive Blades³ ME10A1203C01 12.0V 1.0A 12W 120mV pk-pk ±1% ±5% ME10A1503C01 15.0V 0.8A 12W 150mV pk-pk ±1% ±5% ME10A2403C01 24.0V 0.5A 12W 240mV pk-pk ±1% ±5% Notes: 1. Measured at the output connector, with noise probe directly across output and load terminated with 0.1μF ceramic and 10μF low ESR capacitors. For 5V and 6V models, values listed are typical, 100mV pk-pk maximum with 0.1μF ceramic and 47μF low ESR capacitors used at measurement point. 2. Order blade kit KT-1027K for other blades (EU. UK, Australia) 3. For EU fixed blades, replace “C” in the model number with “M”, for UK blades, replace “C” with “G”, for Australia blades, replace “C” with “H”. 4. For Input Class I models: For AC GND connected to output common (-), insert a “B” in the part number where the “A” is located (ME10B0503F01). 5. All specifications are typical at nominal input, full load, at 25°C ambient unless noted. General Specifications Parameter Specification Parameter Specification Less than 700mS @115Vac, full load AC Input 100-240Vac, ±10%, 47-63Hz, 1∅ Turn On Time Input Current 115Vac: 0.45A, 230Vac: 0.22A Hold-up Time 20mS min., at full Load, 100Vac input Overtemperature Will shutdown upon an overtemperature Inrush Current 264Vac, cold start: will not exceed 40A Protection condition, auto-recovery. F1, F2: 3.15A, 250Vac fuses (line & neutral Input Fuses Overload Protection 130 to 180% of rating, Hiccup Mode lines) provided on all models Earth Leakage <500μA@264Vac, 60Hz, NC Short Circuit Hiccup Mode, auto recovery. <1mA@264Vac, 60Hz, SFC Current (Input to Ground) Protection Patient Leakage <100μA@264Vac, 60Hz, NC Overvoltage 130 to 150% of output voltage, hiccup mode <500µA@264Vac, 60Hz, SFC Current (Output to Earth) Protection Input-Output: 2 MOPP 10 to 12W continuous – See models chart for Input-Ground: 1 MOPP Output Power Isolation specific voltage model ratings. Output-Ground: 1500Vac Efficiency >87%, typical Safety Standards EN/IEC/UL60601-1, 3rd edition No Load Input <0.1W per DoE Efficiency Level VI Operating -20°C to +70°C. See curve for derating Requirements Power Temperature Storage Ripple and Noise See models chart -40°C to +85°C Temperature Operating: to 5000m. Output Voltage See models chart Altitude Non-operating: -500 to 40,000 ft. 500µs response time for return to within 0.5% Transient of final value for any 50% load step over the Relative Humidity 5% to 95%, non-condensing range of 5% to 100% of rated load,∆i/∆t< Response 0.2A/µs. Max. voltage deviation is +/-3.5%. 1.4m from table top to wooden platform, 6 See models chart Regulation Drop Test faces. Operating: 0.003g/Hz, 1.5grms overall, 3 axes, Operating: Half-sine, 20gpk, 10mS, 3 axes, 10 min/axis, 1-500Hz. 6 shocks total Non-Oper.: random waveform, 3 min. per axis, Non-Operating: Half-sine waveform, impact Vibration Shock 3 axes and Sine waveform, Vib. Freq. acceleration of 100G, Pulse duration of 6 /acceleration: 10-500Hz/1g, sweep rate of 1 oct mS, Number of shocks: 3 for each of the /min., Vib. time of 10 sweeps / axes, 3 axes three axis >10 year life based on calculations at >1,000,000 hours, full load, 110 & 220Vac 115Vac/60Hz & 230Vac/50Hz, ambient 25°C input, 25°C amb., per Telcordia 332 Issue 6, MTBF E-Cap Life at 24 hrs per day, 365 days/year, 6 power up Stress Method. cycles per day. www.slpower.com ME10 Rev 2.8 09-NOV-17 2 ME10 10W-12W Single Output External Power Medical Series EMI/EMC Compliance Parameter Specification Conducted Emissions: EN55011/CISPR11 Class B, FCC Part 15.107, Class B: 6db margin typ, at 115 and 230Vac Radiated Emissions: EN55011/CISPR11 Class B, FCC Part 15.109, Class B: 3db margin typ, at 115 and 230Vac Common Mode Noise: High Frequency (100kHz-20MHz): <40mA pk-pk Electro-Static Discharge (ESD) EN55024/IEC61000-4-2, Level 4: +/- 8kV contact, +/- 15kV air, Criteria A th Immunity on Power ports: IEC60601-1-2, 4 Edition, Table 4 EN55022/EN61000-4-3, 10V/m, 80MHz-2.7GHz, 80% AM at 1kHz Radiated RF EM Fields Susceptibility th IEC60601-1-2, 4 Edition, Table 4 EN55024/IEC61000-4-4, Level 4, +/- 4.4kV, 100Khz rep rate, 40A, Criteria A Electrical Fast Transients (EFT) /Bursts: th IEC60601-1-2, 4 Edition, Table 5 Surges, Line to Line (Diff Mode) and Line EN55024/IEC61000-4-5, Level 4, +/-2kV DM, +/-4kV CM, Criteria A th to GND (CMN Mode) Surpasses IEC60601-1-2, 4 Edition requirements. EN55022/IEC61000-4-6, 3.6V/m – Level 4, 0.15 to 80Mhz; and 12V/m) in ISM and amateur Conducted Disturbances induced by RF radio bands between 0.15Mhz and 80Mhz, 80% AM at 1KHz Fields th IEC60601-1-2, 4 Edition, Table 5 EN55024/IEC1000-4-8, Level 4: 30 A/m, 50/60 Hz Rated Power frequency magnetic fields IEC60601-1-2, 4th Edition, Table 4 EN55024/IECEN61000-4-11: --100% dip for 10 mS, at 0, 45, 90, 135, 180, 225, 270 and 315 degrees, 100% dip for 20mS, 0 deg., Criteria A Voltage Interruptions, Dips, Sags & --100% dip for 5000mS (250/300 cycles), Criteria B --60% dip for 100mS, Criteria B Surges --30% dip for 500mS, Criteria A IEC60601-1-2, 4th Edition, Table 5 EN55011/EN61000-3-2, Class A Harmonic Current Emissions Flicker Test EN61000-3-3 All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Consult factory for information regarding testing for or usage under special environments. Note: Performance criteria are based are defined as following: A – Normal performance during and after the test B – Temporary degradation, self-recoverable C – Temporary degradation, operator intervention required to recover the operation D – Permanent damage Mechanical Drawing IEC60320 C14 Receptacle, 2.5 x 5.5 x 9.5mm Barrel Connector Interchangeable N.A. Blade, 2.5 x 5.5 x 9.5mm barrel connector Notes: 1. All dimensions in mm. 2. Weight = 110g 2. Interchangeable blade models come with North American blade fitted. For other blades (EU, UK, Aust.) order blade kit KT1027K. 3. The unit should not be covered or enclosed to protect against excessive case temperature rise. www.slpower.com ME10 Rev 2.8 09-NOV-17 3 ME10 10W-12W Single Output External Power Medical Series Derating Chart: 14 12 10 8 5V 7V 6 12V 4 24V 2 0 -20 -10 0 10 20 30 40 50 60 70 Ambient Temperature ͦC Connector Information Standard models include a 2.5 x 5.5 x 9.5mm straight barrel type connector (No. 3), center positive. Other standard options are listed below. The “03” in the standard model number is replaced by the applicable digits below: These are the most common standard connectors. SL Power has the capability to incorporate any non-standard output connector. All output connectors are limited by wattage range and application type. The SL Power applications team is available to provide professional support and can be contacted here: info@slpower.com. Data Sheet © 2017 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com ME10 Rev 2.8 09-NOV-17 4 Watts