SL POWER ME90A1502F01

ME90 90W Single Output External Power Medical Series Features  Meets UL/EN/IEC60601-1-2, 4th edition for * EMC  Approved to EN/IEC/UL60601-1, 3rd edition with isolation levels which satisfy the 2 MOPP requirements  Meets DoE Efficiency Level VI Requirements  No load input power  Average Efficiency  Up to 90W of AC-DC Power  Universal Input 90-264Vac Input Range  Desktop Style Package  Meets EN55011/CISPR11, FCC Part 15.109 Class B Conducted & Radiated Emissions, with 6db margin  E-cap life of >7 years  3 Year Warranty  IP22 Rated Enclosure Description A high performance AC to DC external power supply family designed for medical applications. The ME90 Medical Series external AC-DC power supplies are approved to safety EN/IEC/UL60601-1, 3rd edition with isolation levels which satisfy the 2 * MOPP requirements and designed to UL/EN/IEC60601-1-2, 4th edition for EMC . The ME90 Series models will operate at universal input range of 90 to 264Vac over the wide temperature range of -20°C to +50°C, delivering full rated output power up to +40°C and applicable output power derating at 50°C. These models are available in desktop versions, include an IP22 rating per IEC60529 for the enclosure, and the output cable can be terminated at a variety of output connectors. *Professional Equipment only. Consult Factory for Table 9 compliance information. Model Selection Model Output Output Ripple & Line Load Output Input Number Volts Current Power Noise¹ Regulation Regulation Connector Configuration 2 ME90A1251F01 12.0V 7.50A 90W 120mV pk-pk ±1% ±5% 6 pin Molex Type Class I Desktop, ME90A1503F01 15.0V 6.00A 90W 150mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm IEC60320 C14 ME90A1803F01 18.0V 5.00A 90W 180mV pk-pk Straight Barrel Type, ±1% ±5% Receptacle center positive ME90A2403F01 24.0V 3.75A 90W 240mV pk-pk ±1% ±5% 2 ME90A1251N01 12.0V 7.50A 90W 120mV pk-pk ±1% ±5% 6 pin Molex Type Class II Desktop, ME90A1503N01 15.0V 6.00A 90W 150mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm IEC60320 C8 ME90A1803N01 18.0V 5.00A 90W 180mV pk-pk ±1% ±5% Straight Barrel Type, Receptacle center positive ME90A2403N01 24.0V 3.75A 90W 240mV pk-pk ±1% ±5% 2 ME90A1251Q01 12.0V 7.50A 90W 120mV pk-pk 6 pin Molex Type ±1% ±5% Class II Desktop, ME90A1503Q01 15.0V 6.00A 90W 150mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm IEC60320 C18 ME90A1803Q01 18.0V 5.00A 90W 180mV pk-pk ±1% ±5% Straight Barrel Type, Receptacle center positive ME90A2403Q01 24.0V 3.75A 90W 240mV pk-pk ±1% ±5% Notes: 1. Measured at the output connector, with noise probe directly across output and load terminated with 0.1μF ceramic and 10μF low ESR capacitors. 2. Molex p/n 39-01-2060 or equivalent. See outline drawing for pinout information. 3. For Input Class I models: For AC GND connected to output common (-), insert a “B” in the part number where the “A” is located (ME90B1251F01). www.slpower.com ME90 Rev 2.1 9-NOV-17 1 ME90 90W Single Output External Power Medical Series General Specifications Parameter Specification Parameter Specification AC Input 100-240Vac, ±10%, 47-63Hz, 1∅ Turn On Time Less than 1 sec @115Vac, full load 115Vac: 2.0A, 230Vac: 1.0A 20mS min., at full Load, 100Vac input Input Current Hold-up Time Overtemperature Will shutdown upon an overtemperature 264Vac, cold start: will not exceed 60A Inrush Current condition, auto-recovery. Protection F1, F2: 3.15A, 250Vac fuses (line & neutral 130 to 180% of rating, Hiccup Mode Input Fuses Overload Protection lines) provided on all models Earth Leakage Short Circuit <500μA@264Vac, 60Hz, NC Hiccup Mode, auto recovery. <1mA@264Vac, 60Hz, SFC Current (Input to Ground) Protection Patient Leakage <100μA@264Vac, 60Hz, NC Overvoltage 130 to 150% of output voltage, hiccup mode Current (Output to Earth) <500µA@264Vac, 60Hz, SFC Protection Input-Output: 2 MOPP Efficiency >88%, typical Isolation Input-Ground: 1 MOPP Output-Ground: 1 MOPP 90W continuous – See models chart for Output Power Safety Standards EN/IEC/UL60601-1, 3rd edition specific voltage model ratings. -20°C to +50°C. Derate above 40°C. No Load Input <0.210W (meets DoE Efficiency Level VI Operating Start Up at -40°C, full load, (warmup period Requirements) Power Temperature before all parameters are within published specifications). Ripple and Noise See models chart on pg 1. Storage Temperature -40°C to +85°C Operating: to 5000m. Output Voltage See models chart on pg 1. Altitude Non-operating: -500 to 40,000 ft. 500µs response time for return to within 0.5% Transient of final value for any 50% load step over the Relative Humidity 5% to 95%, non-condensing Response range of 5% to 100% of rated load,∆i/∆t< 0.2A/µs. Max. voltage deviation is +/-3.5%. 1.4m from table top to wooden platform, 4 Regulation See models chart on pg 1. Drop Test faces. Operating: 0.003g/Hz, 1.5grms overall, 3 Operating: Half-sine, 20gpk, 10mS, 3 axes, axes, 10 min/axis, 1-500Hz. 6 shocks total Non-Oper.: random waveform, 3 minutes per Non-Operating: Half-sine waveform, impact Vibration axis, 3 axes and Sine waveform, Vib. Shock acceleration of 100G, Pulse duration of 6 frequency/acceleration: 10-500Hz/1g, sweep mS, Number of shocks: 3 for each of the rate of 1 octave / minutes, Vibration time of three axis 10 sweeps / axes, 3 axes W: 2.58” x L: 5.9” x H: 1.34” >250,000 hours, full load, 110 & 220Vac Dimensions MTBF W: 65.5mm x L: 150.5Mm x H: 34mm input, 25°C amb., per Telcordia 332 Issue 6. >7 year life based on calculations at 115Vac/60Hz & 230Vac/50Hz, ambient 600g Weight E-Cap Life 25°C at 24 hrs per day, 365 days/year, 6 power up cycles per day. (80% load on 5V, 12V model) www.slpower.com ME90 Rev 2.1 9-NOV-17 2 ME90 90W Single Output External Power Medical Series EMI/EMC Compliance Parameter Specification Conducted Emissions: EN55011/CISPR11 Class B, FCC Part 15.107, Class B: 6db margin typ, at 115 and 230Vac EN55011/CISPR11 Class B, FCC Part 15.109, Class B: 3db margin typ, at 115 and 230Vac Radiated Emissions: High Frequency (100kHz-20MHz): <40mA pk-pk Common Mode Noise: Electro-Static Discharge (ESD) EN55024/IEC61000-4-2, Level 4: +/- 8kV contact, +/- 15kV air, Criteria A th IEC60601-1-2, 4 Edition, Table 4 Immunity on Power ports: EN55024/EN61000-4-3, 10V/m, 80MHz-2.7GHz, 80% AM at 1kHz Radiated RF EM Fields Susceptibility th IEC60601-1-2, 4 Edition, Table 4 EN55024/IEC61000-4-4, Level 4, +/- 4kV, 100Khz rep rate, 40A, Criteria A Electrical Fast Transients (EFT) /Bursts: th IEC60601-1-2, 4 Edition, Table 5 Surges, Line to Line (Diff Mode) and Line EN55024/IEC61000-4-5, Level 4, +/-2kV DM, +/-4kV CM, Criteria A th Surpasses IEC60601-1-2, 4 Edition requirements. to GND (CMN Mode) EN55024/IEC61000-4-6, 3.6V/m – Level 4, 0.15 to 80Mhz; and 12V/m) in ISM and amateur Conducted Disturbances induced by RF radio bands between 0.15Mhz and 80Mhz, 80% AM at 1KHz Fields th IEC60601-1-2, 4 Edition, Table 5. EN55024/IEC1000-4-8, Level 4: 30A/m, 50/60 Hz Rated Power frequency magnetic fields IEC60601-1-2, 4th Edition, Table 4 EN55024/IECEN61000-4-11: --100% dip for 10 mS, at 0, 45, 90, 135, 180, 225, 270 and 315 degrees, Criteria A; 100% dip for 20mS, Criteria A --100% dip for 5000mS (250/300 cycles), Criteria B Voltage Interruptions, Dips, Sags & Surges --60% dip for 100mS, Criteria B --30% dip for 500mS, Criteria A IEC60601-1-2, 4th Edition, Table 5 Harmonic Current Emissions EN55011/EN61000-3-2, Class A Flicker Test EN61000-3-3 All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Consult factory for information regarding testing for or usage under special environments. Note: Performance criteria are based are defined as following: A – Normal performance during and after the test B – Temporary degradation, self-recoverable C – Temporary degradation, operator intervention required to recover the operation D – Permanent damage www.slpower.com ME90 Rev 2.1 9-NOV-17 3 ME90 90W Single Output External Power Medical Series Mechanical Drawing 34±0.5 65.5±0.5 65.5±0.5 34±0.5 15V through 24V Models: 2.5 x 5.5 x 9.5mm 12V Models: Output Connector: 6 pin Molex 39-01-2060 Barrel Connector, center positive. or equiv. Pins 1, 4 = (+), pins 3, 6 = (-), pins 2, 5 = NC Notes: 1) All dimensions in mm. 2) 2.5mm barrel connector shown, other options are available. 3) The unit should not be covered or enclosed to protect against excessive case temperature rise. Connector Information Standard models include a 2.5 x 5.5 x 9.5mm straight barrel type connector (Ault #3), center positive. Other standard options are listed below. The “03” in the standard model number is replaced by the applicable digits below: These are the most common standard connectors. SL Power has the capability to incorporate any non-standard output connector. All output connectors are limited by wattage range and application type. The SL Power applications team is available to provide professional support and can be contacted here: info@slpower.com. Data Sheet © 2017 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com ME90 Rev 2.1 9-NOV-17 4 150.5±0.5 150.5±0.5