SL POWER MENT1150A2451F01

MENT1150 Universal Input 150 Watt Series Medical / ITE Switch-Mode Power Supply 3 Year Warranty •100-240VAC Universal Input •Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II •Desktop Style with LED Power-On indicator •12V to 48V Single Output Models, up to 150W •Modified and Custom Designs Available •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No Load Power Consumption <0.5W nd •Meets UL/EN/IEC60601-1 & 60950-1 2 edition RoHS Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. MTBF > 100K hours (calculated, 25
C at full load) AC Input 100-240Vac, +/-10%, 47-63 Hz, 1∅ Input Current 115VAC: 3A, 230VAC: 1.5A Hold-up Time 20 ms min. @ 115VAC Inrush Current 75A peak @ 264Vac, cold start Overvoltage Protection 130% of nominal output voltage Input Fuse 4.0A, 250V Internal Primary Current Fuse provided Overload Protection 120-180% of full rated load, auto-recovery Efficiency Meets International Efficiency Level V Short Circuit Protection Provided with no damage to supply Output Voltage See chart Overtemperature Protection Latched, requires input recycling Output Power See chart Input Harmonics Meets IEC61000-3-2 nd Ripple and Noise 1% pk-pk max., 20MHz BW Safety Standards IEC/EN/UL60601-1 & EN/IEC/UL60950-1 2 edition Line/Load Regulation Including Cord: Line: +/- 1%, Load: +/-5% Switching Frequency 40kHz to130kHz , variable Transient Response Maximum deviation of 5% with 25% to Isolation Input-Output: 4000VAC, 75% load change and 0.2A/uSec slew rate Input-GND: 1500VAC, Output-GND: 700VDC Minimum Load Not required Operating Temperature 0° to 40°C Full load Derate linearly to 40% of full rated load at 70°C Case Material Black 94V0 Polycarbonate Temperature Coefficient 0.04% per °C, maximum Case Dimensions see mechanical drawing Storage Temperature -40°C to +85°C Altitude -500 to 10,000 ft, operating; -500 to 40,000 ft, non-operating Relative Humidity 5% to 95%, non-condensing EMI/EMC Compliance Conducted Emissions FCC Part 15 Subpart B, Class B, EN55011 Class B, EN55024 Radiated Emissions FCC Part 15 Subpart B, Class B, EN55011 Class B, EN55024 Voltage Fluctuations EN61000-3-3 Complies (dmax<6%) Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge. Criteria A Radiated RF Immunity EN61000-4-3, 3V/m. Criteria A EFT/Burst Immunity EN61000-4-4, 2kV/5kHz. Criteria A Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode, Criteria A Conducted RF Immunity EN61000-4-6, 3Vrms, Criteria A Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m, Criteria A Voltage Dip Immunity EN61000-4-11, 0 % Vnominal, 0.5 cycle; 40% Vnominal, 5 cycles; 70% Vnominal, 25 cycles: Criteria A Line Frequency Harmonics EN61000-3-2, Class A, B, C & D ______________________________________________________________________________________________________________________________ 1 of 2 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com MENT1150 Universal Input 150 Watt Series Medical / ITE Switch-Mode Power Supply 3 Year Warranty Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) MENT1150A1251F01 12V 11.67 A 140W 120mV MENT1150A1551F01 15V 9.33 A 140W 150mV MENT1150A1851F01 18V 7.78 A 140W 180mV MENT1150A2451F01 24V 6.25 A 150W 240mV MENT1150A2851F01 28V 5.35 A 150W 280mV MENT1150A4851F01 48V 3.12 A 150W 480mV Model Number Key MENT 1 150 A VV 51 F 01 Model "01" = Standard. "02" and higher indicates a modified model. Input Connector: "F" = IEC320 C14 grounded, Other options available, contact the factory. Output Connector: "51" = Molex 39-01-3065 or equiv. Other options available, contact the factory. Output Voltage: "12" = 12Vdc, "24" = 24Vdc, etc. Model "A" = Original Configuration Output Power: "150" = 150 Watts # of Outputs "1" = Single Output Product Family: "M" = Medical, "E" = External, "NT" = Model Series Designator Input Recept. #3 Output Connector - 2.5mm barrel type, center (+) #51 Output Connector - Molex 39-01-2060 or equiv. IEC320 - C14 Class I Grounded (F) Mate = Molex 39-01-2061 or equiv. Outline Drawing Connector Pinout Pin No. Wire AWG & Color Desig. 1 18AWG RED +Vout 2 18AWG BLUE GND 3 18AWG GREEN GND 4 18AWG WHITE +Vout 5 18AWG YELLOW +Vout 6 18AWG BLACK GND Data Sheet © 2011 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 3-28-2011 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ 2 of 2 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com