SL POWER MINT1110A1208K01

MINT1110A SL POWER 110W Single Output Series MINT1110A SERIES 110 Watt Medical Power Supply Medical – Universal Input Power Supply 2 Year Warranty Measures: 5.00 x 3.00 x 1.27” •110W Convection Cooled AC-DC Power Supply •Universal Input 90-264 VAC •Less than 1.27” Height •Rugged EMC Compliant Design •3” x 5” Package •Approved to EN/IEC/UL60601-1 for Medical • Compliant (LVD, RoHS) Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input Turn On Time 100-240VAC +/- 10%, 47-63 Hz single phase. Less than 2 seconds under all rated load conditions. Input Current Hold-up Time 115VAC: 1.4A. 16 ms at 110W, nominal input (120VAC). Inrush Current Overvoltage Protection The inrush at 264VAC, at a cold start, will not exceed 40A. See chart for levels, latching type Input Fuses Overload Protection F1, F2: 2.5A, 250VAC fuses provided on all models. Hiccup Mode Power Factor Short Circuit Protection Complies with EN61000-3-2. Hiccup Mode Efficiency Overtemperature Protection 87% typical. Provided on all models. Output Power Medical Safety Standards 90 - 110W continuous. EN/IEC/UL 60601-1, CSA22.2, No. 601.1 Ripple and Noise Isolation 1% pk-pk max., 20MHz BW, differential mode. Measured with noise Input-Output: 4000VAC, Input-Ground: 1500VAC, Output-Ground: probe directly across output terminals. 500VDC Output Voltage Earth Leakage Current See chart. <130A at 264Vac, 60Hz. Minimum Load Operating Temperature Not required. 0° to 70°C (derate from full rated power above 40°C) Total Regulation Output Power Derating See chart. Derate Output Power by 2.5% per °C above 40°C, up to 70°C max. Transient Response Storage Temperature 500s max., 50% load step, typical. -40 to +85°C. Relative Humidity 5% to 95%, non-condensing 1 of 3 ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-MINT1110A-power-supply.html http://power.sager.com SL POWER MINT1110A MINT1110A SERIES 110 Watt Medical Power Supply 110W Single Output Series Measures: 5.00 x 3.00 x 1.27” Medical – Universal Input Power Supply 2 Year Warranty Output Parameters Model Output Ripple Total OVP Initial Setpoint Number Volts (V) Current & Noise Regulation Threshold Tolerance MINT1110A1208K01 12V 7.5A 120mV ±2% 15.0 ± 1V ±1% MINT1110A1508K01 15V 6.5A 150mV ±2% 18.0 ± 1V ±1% MINT1110A1808K01 18V 5.8A 180mV ±2% 23.0 ± 1V ±1% MINT1110A2408K01 24V 4.6A 240mV ±2% 28.0 ± 1V ±1% Specifications (continued) Vibration Shock 2 Operating: 0.003 g /Hz, 1.5 g overall, 3 axes, 10 min. / axis Operating: Half-sine, 20 g , 10 ms, 3 axes, 6 shocks total rms pk 2 Non-Operating: 0.026 g /Hz, 5.0 grms overall, 3 axes, 1 hr. / axis Non-Operating: Half-sine, 40 gpk, 10 ms, 3 axes, 6 shocks total Enclosure Dimensions Operating Altitude See outline drawing. -500 to 10,000 ft. Weight Non-operating Altitude 372 grams -500 to 40,000 ft. EMI/EMC Compliance Conducted Emissions EN55011 Class B, FCC Part 15, Class B. Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 10V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz.. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11 240VAC, 0%/0.5 cycle, 40%/5cycles, 70%/25 cycles Line Frequency Harmonics EN61000-3-2, Class A Model Number Key MINT 1 110 A 12 08 K 01 01 = Standard Configuration. 02 and higher indicate modified model. Input Connector Output Connector Output Voltage Model Configuration Output Power (Watts) # of Outputs Product Family: "M" = Medical, "I" = Internal, "NT" = New Technology 2 of 3 ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-MINT1110A-power-supply.html http://power.sager.com SL POWER MINT1110A SERIES MINT1110A 110 Watt Medical Power Supply 110W Single Output Series Measures: 5.00 x 3.00 x 1.27” Medical – Universal Input Power Supply 2 Year Warranty Outline Drawing INPUT CONNECTOR: J1 LANDWIN 3361P03E3TSN02 PIN 1) AC LINE PIN 2) AC NEUTRAL OUTPUT CONNECTOR: J2 LANDWIN P/N 3361P08E3T PIN 1) +Vout PIN 5) -Vout PIN 2) +Vout PIN 6) -Vout PIN 3) +Vout PIN 7) -Vout PIN 4) +Vout PIN 8) -Vout MATING CONNECTORS: P1 AMP P/N MTA-156-3P P2 AMP P/N MTA-156-8P GROUND CONNECTION 0.250" FASTON TAB Data Sheet © 2010 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 5/24/2010 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. 3 of 3 ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-MINT1110A-power-supply.html http://power.sager.com