SL POWER MINT1180A3275K01

MINT1180 SL POWER 180W Single Output MINT1180 SERIES Medical Series 180 Watt Medical Power Supply Measures: 5.00 x 3.00 x 1.30” Features  3” x 5” x 1.3” Package  180W Convection Cooled Power  Ideal for 1U Applications  Class I and Class II versions  Universal Input 90-264 VAC rd  Approved to CSA/EN/IEC/UL60601-1, 3 Edition, 2 x MOPP Isolation nd  Approved to CSA/EN/IEC/UL60950-1 2 Edition  Efficiency 90% typical  3 Year Warranty  RoHS Compliant Description The MINT1180 product family is the most cost-effective medically approved supply in the market with 180 watts of convection cooled output power in 3”X5” footprint. The series comes in eight different models ranging from rd 12 to 48V and has been approved to IEC60601-1 3 Edition, rated for 2 MOPP (Means of Patient Protection) isolation. This new single output power supply family has both Class I and II input versions and accepts wide input range of 90 to 264Vac. The typical 90% efficiency and convection cooled make this supply an excellent solution for HomeCare applications where the use of fans is not desired. Model Selection Output Ripple & Total Model Number Volts Current* Minimum Load Noise** Regulation OVP Threshold MINT1180A1275K01 12V 15.0A 0A 120mV pk-pk ±3% 14.0 ± 1.1V MINT1180A1575K01 15V 12.0A 0A 150mV pk-pk ±3% 18.5 ± 1.2V MINT1180A1875K01 18V 10.0A 0A 180mV pk-pk 21.5 ± 2.0V ±3% MINT1180A2475K01 24V 7.50A 0A 240mV pk-pk ±3% 29.0 ± 2.5V MINT1180A2875K01 28V 6.40A 0A 280mV pk-pk 33.5 ± 2.5V ±3% MINT1180A3275K01 32V 5.62A 0A 320mV pk-pk ±3% 36.0 ± 3.0V MINT1180A4875K01 48V 3.75A 0A 480mV pk-pk ±3% 56.0 ± 3.0V Notes: * Total convection power is 180 Watts. ** Measured with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR capacitors. General Specifications 100-240Vac, ±10%, 47-63Hz, 1∅ AC Input Turn On Time Less than 3 sec. @115Vac & Full Load 120–370Vdc 115Vac: 1.8A, 230Vac: 0.9A >16mS at 180W, 120Vac Input Current Hold-up Time www.slpower.com MINT1180 REV 1.8, 15-OCT-13 1 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-MINT1180-power-supply.html http://power.sager.com SL POWER MINT1180 MINT1180 SERIES 180W 180 W Sing att Medical P le Output ower Supply Medical Series Measures: 5.00 x 3.00 x 1.30” General Specifications (continued) Inrush Current 264Vac, cold start: will not exceed 55A Signals N/A F1, F2: 4.00A, 250VAC fuses provided on all Overload Input Fuses 120%-150% of rating, Hiccup Mode models Protection Earth Leakage Short Circuit Provided - no damage will occur if the output is <275A@264Vac, 60Hz, NC; <400μA SFC Current Protection shorted, auto recovery Overvoltage OVP latch at 110%-130% of rated output Efficiency 88% typical Protection voltage. PFC: Fixed, 65kHz Switching Output Power 180W convection cooled Main Converter: Variable 35-200kHz, 65-70kHz Frequency at full load. 500S typ. for return to within 0.5% of Input-Output: 4000Vac, 2 x MOPP Transient Isolation Input-Ground: 1800Vac, 1 x MOPP nominal, 50% load step. Δi/Δt <0.2A/μS. Response Max Volt Deviation = 3% Output-Ground: 1500Vac Operating -10°C to +70°C Ripple and Noise See chart Temperature Start Up at -40°C, full load Temperature Derate output power linearly above 50°C to 50% See chart Output Voltage Derating at 70°C Voltage Storage Fixed output -40°C to +85°C Adjustability Temperature Operating: -500 to 10,000 ft. Not required Minimum Load Altitude Non-operating: -500 to 40,000 ft. +/- 3% combined line, load and initial setting. 5% to 95%, non-condensing Total Regulation Relative Humidity Operating: 0.003g²/Hz, 1.5grms overall, 3 Operating: Half-sine, 20gpk, 10ms, 3 axes, 6 axes, 10 min/axis shocks total Vibration Shock Non-Operating: Half-sine, 40 gpk, 10 ms, 3 Non-Operating: 0.026g²/Hz, 5.0grms overall, axes, 6 shocks total 3 axes, 1 hr/axis rd EN/CSA/UL/IEC 60601-1, 3 Edition Dimensions W: 3.0” x L: 5.0” x H: 1.3” Safety Standards nd EN/CSA/UL/IEC 60950-1, 2 Edition Weight 325g MTBF 214,194 hours, 25°C, 110Vac Output vs. Temperature Derating Curve 180W convection cooled, derate output power to 50% at 70°C. 200 150 100 50 0 -10 0 10 20 30 40 50 60 70 Temperature (C) Convection www.slpower.com MINT1180 REV 1.8, 15-OCT-13 2 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-MINT1180-power-supply.html http://power.sager.com Output Power (W) SL POWER MINT1180 MINT1180 SERIES 180W 180 W Sing att Medical P le Output ower Supply Medical Series Measures: 5.00 x 3.00 x 1.30” EMI/EMC Compliance Conducted Emissions EN55011/22 Class B, FCC Part 15, Subpart B, Class B Radiated Emissions EN55011/22; FCC Part 15, Class A with 6dB Margin Static Discharge Immunity EN61000-4-2, Criteria A, 6kV Contact Discharge, 8kV air discharge EN61000-4-3, 3V/m. Criteria A. Radiated RF Immunity EFT/Burst Immunity EN61000-4-4, 2kV/5kHz, Criteria A Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode, Criteria A Conducted RF Immunity EN61000-4-6, 3Vrms, Criteria A EN61000-4-8, 3A/m, Criteria A Power Frequency Magnetic Field Immunity EN61000-4-11, 5% Vnom: 0.5cycle; 40% Vnom: 5 cycles, 70% Vnom: Voltage Dip Immunity 25 cycles, Criteria A Line Harmonic Emissions EN61000-3-2, Class A, B, C, & D Flicker Test EN61000-3-3, Complies (dmax<6%) Mechanical Drawing Notes: 1. All dimensions in inches (mm), tolerance is +/-0.000”. 2. Mounting holes should be grounded for EMI purposes. 3. FG is safety ground connection. 4. The power supply requires mounting on metal standoffs 0.20” (5mm) in height, min. [4] x 0.156 4 PLCS MTG HOLES Connector Information Input Connector Ground DC Output Connector J100 (FG) J300 PIN 1) AC LINE Term. 1,2,3: RTN PIN 2) EMPTY 0.25” FASTON TAB Term. 4,5,6: +Vout PIN 3) AC NEUTRAL Mating Connector: Mating Connector: Mating Connector: AMP 640250-3 AMP 640250-6 Molex 190020001 Pins: 640252-2 Pins: 640252-2 Data Sheet © 2013 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com MINT1180 REV 1.8, 15-OCT-13 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/sl-power-MINT1180-power-supply.html http://power.sager.com