SL POWER MW122RA2403F01

MW122 MEDICAL 120 WATT SERIES MW122 SWITCH-MODE MW122 POWER SUPPLY Voltage Max Max Ault Part No. DC Amps Watts • 100-240 VAC Universal Input MW122RA12XXF01 12V 10 120 • Desktop Style MW122RA24XXF01 24V 5 120 • Single Output to 120W • Regulated Output With Low Ripple Ault Part No. Key Ault Part No. Key • Meets Medical Safety Agency Requirements MW122 R A 12 XX __ 01 • Complies With EMI/RFI Regulations Product Manufacturing Design Voltage Connector Input Standard (no Family Location Revision DC #51 - Standard Configuration/ modifications, Name (volume Changes for12V model; Model Type special artwork • CE Compliant dependent) Connector (see pg. 2) or special #3 -Standard packaging) for 24V model. • Impact Resistant Polycarbonate Enclosure • Private Label Marking Available • 3 Year Warranty • Modified and Custom Designs Also Available AULT INCORPORATED 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com © Copyright 2004 Ault Inc. MW122 MEDICAL 120 WATT SERIES Input Electrical Rated Voltage 100-240 VAC +/–10% Efficiency 86% Typical Operating Voltage 90-264 VAC Dielectric Withstand 4000 VAC, 5600 VDC primary-secondary 1500 VAC, 2150 VDC primary-ground Line Frequency 47-63 Hz 500 VDC secondary-ground Current 2A max. at 90 VAC input EMI Complies with EMC Directives Protection Dual internal primary current fuse CE CE Compliant Power Factor Correction Complies with EN61000-3-2 and MTBF Min. 100,000 Hours Provided EN61000-3-3 Environmental Output Operating Temperature 0º to 40ºC with no derating Combined Line and Load ±1% excluding cord Voltage Regulation Storage Temperature -30º to +85ºC Ripple mVp-p 1% max Relative Humidity 5% to 95% non-condensing Transient Response 0.5 msec. for 50% load change typical Altitude 0-10,000 feet Holdup Time 16 msec min. over entire input range Cooling Convectional - non vented case Protection Overcurrent protection. Short circuit protection. Mechanical Cord and Connector 12V: 5 ft., 4 conductor, 18AWG, #51 Case and Dimensions 9.0L x 2.9W x 2.0H (in) connector, Pinout Pins 1-4 = +V. 3,6 = 229L x 74W x 51H (mm) common with overmolded Ferrite core. 24V: 5 ft., 2 conductor, 18AWG, with Case Material Black 94V0 polycarbonate overmolded Ferrite core, #03 connector, center positive. Weight 24 ounces, 684 grams (excluding cord) Safety Approvals Connector Agency Listings cURus2601, TUV/IEC EN60601-1 Input Configuration Pinout Code Center contact: positive IEC320 w/ground w Description Switchcraft 760 plug or equivalent C14 (F) Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order Pinout Code Molded Mini Fit Receptacle Description Overmolded by Ault 6 pos, Molex 39-01- 2060 max. wire 18AWG or equivalent Suggested Mating Plug Molex 39-01-2060 or 3063 Other Connectors are available by special order AULT INCORPORATED 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com © Copyright 2004 Ault Inc.