SL POWER MW155RA1851F01

MW155 120 Watt Medical Adapter Series • 100-240 VAC Universal Input • PFC Corrected • Low Life-Cycle Operation Cost • Desktop Style • Complies with EMI/RFI Regulations • CE compliant (LVD, EMC, WEEE, RoHS) • Impact Resistant, Non-vented Polycarbonate Enclosure • IPX1 Compliant • Modified and Custom Designs also Available • Meets ENERGY STAR Criteria Level IV and EISA Requirements — see reverse side for details International Safety Standard Approvals Specifications Output Specifications Environmental Specifications Line and Load Excluding Cord ±1% Thermal Performance Operating Temperature 0° C to 40° C Voltage Regulation with no Derating Ripple 1% Vp-p max. Cooling Convectional Non-ventilated Enclosure Transient Response 5ms max. for 50% load Relative Humidity Non-condensing 5% to 95% change, slew rate of Altitude 0-10,000 feet 0.1A/µs Storage Temp -20° C to +85° C Protection Cycle-by-cycle current limiting, automatic recovery for overload or General Specifications short circuit; active latch- Topology Two stage power conver- off OTP; active latch-off sion, current-mode control OVP Efficiency Energy Star Level IV Certifications UL60601-1, TUV-EN60601-1, Input Specifications IEC 60601-1 Voltage 100-240VAC nominal Hold-up Time 16.7ms min. Line Frequency 47-63Hz MTBF 200,000 Hours Input Current 2.0A max. Weight 24 oz (684 g) Protection Input fuse Case and Dimension 6.6L X 3.2W X 1.6H (in) 167L X 82W X 40H (mm) Case Material 94V-0 Polycarbonate, Black Cord 6 ft (1.8m), 4-conductor, 18AWG standard SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com MW155 120 Watt Medical Adapter Series For the most current data and application support visit www.slpower.com Output Currents Output Max Ault Part Number Voltage Min Max Watts MW155RA1251F01 12 V 0.00 A 9.17 A 110.0 W* MW155RA1551F01 15 V 0.00 A 7.33 A 110.0 W MW155RA1851F01 18 V 0.00 A 6.67 A 120.0 W MW155RA2451F01 24 V 0.00 A 5.00 A 120.0 W *12V model rated 100W with input voltages rated 100-110VAC, 110W with input voltages rated 110VAC-240VAC Ault Part Number Key MW155 R A 24 51 F 01 Product Manufacturing Type Output Output Input Standard Item Family Location Revision Voltage Connector Connector (other numbers Name Style Style for custom) General Specifications (continued from p. 1) Output Connectors EMI Compliance EN55011 and FCC conducted and radiated Class B IEC 61000-3-2 Class D IEC 61000-4-2 (ESD), CD level 2 and AD level 3, criterion B IEC 61000-4-3 (RFS), level 2, criterion A IEC 61000-4-4 (EFT), level 2, criterion A IEC 61000-4-5 (Surge), level 3, criterion B Input Connectors Ault #51 Minifit over molded connector standard IEC320 IEC320 N. America/ Europe Australian Shaver 2007 Energy Independence and Security Act – EISA United w/ground w/o ground Japan (M) (E) C8 Kingdom C14 (B) (N) C18 (G) The Energy Independence and Security Act of 2007 was passed in December of (F) (Q) 2007 and addresses minimum efficiency standards and standby levels for Class A external power supplies that are 250 watts and under. This law stipulates that external power supplies manufactured on July 1, 2008 and beyond meet certain minimum efficiency and standby criteria as defined below. Optional Features Minimum Efficiency Criteria Various output cord wire gauges and connector styles available. See Ault Active mode is defined as when a power supply’s input is connected to line connector style sheets for connector options voltage AC and its output is connected to a DC or AC load drawing a portion “Power-on” LED of the product’s power output. Depending on the power rating for the power Active, Latch-off over temperature protection circuit supply, it must meet the minimum efficiency criteria outlined below. Synchronous rectification Energy-Efficiency Criteria for Active Mode: output power on minimum average Private label marking adapter label efficiency percentage 0 to ≤ less than 1 watt ≥ 0.50 * output power on adapter label > 1 to ≤ 51 watts ≥ [0.09 * Ln (output power on adapter label )] + 0.50 > 51 watts ≥ 0.85 The power supply must also meet a requirement for when its input is connected to a line voltage AC but its output is not connected to a load. Depending on the power output of the supply, it must keep its energy consumption below the following values. Energy Consumption Criteria for No Load Mode: output power on maximum power consumption adapter label in no-load mode 0 to < 250 watts ≤ 0.5 watts SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.6/9/08