SL POWER MW156RA1803N01

MW156 Universal 75 Watt Series Medical / Switch Mode Power Supply • 100-240 VAC Universal Input • ENERGY STAR Level IV Compliant • Low Life-Cycle Operation Cost • Desktop Style • Complies with EMI/RFI Regulations • CE Compliant (LVD, EMC, WEEE, RoHS) • Impact Resistant, Non-vented Polycarbonate Enclosure • Modified and Custom Designs also Available International Safety Standard Approvals Specifications Output Specifications General Specifications Line and Load Excluding Cord +/-1% Topology Quasi-resonant Fly-back Voltage Regulation Current-mode Control Ripple 1% Vp-p max. Efficiency Energy Star Level IV Transient Response 3.0ms max. for 50% Slew Rate of 0.1A/us Hold-up Time @120V 16ms, Typical Load Change Storage Temp -20° C to +85° C Protection Cycle-by-Cycle Automatic Recovery Approvals and UL60601-1, Current Limiting for Overload or Short Safety Standards TUV/EN60601-1 Circuit; Active OVP IEC60601-1 MTBF 165,000 Hours Input Specifications Weight 408g (14.8oz) Voltage 100-240VAC Nominal Case and Dimension LP6 Line Frequency 47-63Hz 5.44L x 2.19W x 1.32H (in) 138.2L x 55.6W x 33.5H (mm) Input Current 2.0A max. Case Material V-0 Polycarbonate Protection Input Fuse Black Inrush Limited Cord and Connectors 6ft. (1.8m) 2-Conductor, 18AWG Standard AULT#3 Connector. Environmental Specifications Thermal Performance Operating Temperature 0° C to 40° C with no Derating Cooling Convectional Non-ventilated Enclosure Relative Humidity Non-condensing 5% to 95% Altitude 0-10,000 feet SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com MW156 Universal 75 Watt Series For the most current data and application support visit www.slpower.com Medical / Switch Mode Power Supply Output Currents Output Max Ault Part Number Voltage Min Max Watts MW156RA1203N01 12 V 0.00 A 6.30 A 75.0 W* MW156RA1503N01 15 V 0.00 A 5.00 A 75.0 W MW156RA1803N01 18 V 0.00 A 4.20 A 75.0 W MW156RA2403N01 24 V 0.00 A 3.10 A 75.0 W Ault Part Number Key MW156 R A 12 03 N 01 Product Manufacturing Type Output Output Input Standard Item Family Location Revision Voltage Connector Connector (other numbers Name Style Style for custom) *12V model rated 70W with input voltages rated 100-119V, 75W with input voltages rated 120-240VAC. EMI Compliance Optional Features FCC EN55024 Class B Various output cord wire gauges and connector styles available. Conducted and Radiated See Ault connector style sheets for connector options Harmonic IEC 61000-3-2 Class A “Power-on” LED ESD IEC 61000-4-2 CD Level 2 AD Level 3, Criterion B IEC 61000-3-2 Class D Harmonic Input Cord RFS IEC 61000-4-3 Level 2, Criterion A Active, Auto-recovery Over Temperature Protection Circuit EFT IEC 61000-4-4 Level 2, Criterion A Synchronous Rectification for Output Voltages Lower than 12V Surge IEC 61000-4-5 Level 3, Criterion B Private Label Marking Input Configuration Pin Connections IEC320 IEC320 N. America/ Europe Australian Shaver United w/ground w/o ground Japan (M) (E) C8 Kingdom C14 C18 (B) (N) (G) (F) (Q) Pinout Code Center contact: positive Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.4/2/08