SL POWER MW172KB1503F01

MW172KB Universal 15 – 18 Watt Series Medical Switch-Mode Power Supply 3 Year Warranty •100-240VAC Universal Input •Desktop and Wall-Plug Style with Interchangeable Blades* ( Kit sold separately) •3.3V to 24V Single Output Models, up to 18W •Modified and Custom Designs •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No load Power Consumption < 0.50W •Designed to meet EISA Requirements (see page 3 for details). Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. General Specifications Output Specifications Topology Switching - Fixed Frequency Line and Load Excluding Cord Line: +/-1% Flyback Voltage Regulation Load: +/-5% Designed to meet EISA Efficiency Requirements - see page 3 Ripple 1% Vp-p max. 0.5mS for 50% Load Change, Transient Response Hold-up Time @ 115VAC 18mS, min. typical. Dialectric Withstand 4,000VAC or 5,656VDC Protection Overcurrent Protection Primary-Secondary; (Hiccup). 1,500VAC or 2,150VDC Short Circuit Protection Primary - F.G; 500VDC Secondary - F.G. Input Specifications Storage Temp. -30° C to 85° C Input Voltage Range Universal Input 100-240VAC, -10%, +10% Approvals and UL60601-1 Safety Standards IEC/EN60601-1 47-63Hz Line Frequency EMC: EN60601-1-2/ Input Current 90 VAC 0.4A, max. EN55024 Protection Internal Primary Current Fuse, MTBF 100,000 Calculated Hours Inrush Limiting Case and Desktop Style: 3.3"L x 1.81"W x 1.26"H Dimensions Environmental Specifications 84.6mm L x 46mm W x 33mm Thermal Operating Temperature 0 C to 40 C ° ° H Performance full load, no derating, Case Material Black 94V0 Polycarbonate convection cooling, Non- Cord and 18AWG, 1,800mm 2 vented case Connectors conductor. (5V, 6V model: 1,500mm). Ault #3 connector. Relative Humidity Non-condensing 5% to 95% Other connectors are available. 0 to 10,000 feet Altitude 1 of 3 ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com MW172KB Universal 15-18 Watt Series Medical Switch Mode Power Supply 3 Year Warranty OUTPUT PARAMETERS Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) MW172KB0503F01 5 V 3.00 A 15.0 W 50mV MW172KB0603F01 6 V 2.50 A 15.0 W 60mV MW172KB0903F01 9 V 2.00 A 18.0 W 90mV MW172KB1203F01 12 V 1.50 A 18.0 W 120mV MW172KB1503F01 15 V 1.20 A 18.0 W 150mV MW172KB1803F01 18 V 1.00 A 18.0 W 180mV MW172KB2403F01 24 V 0.75 A 18.0 W 240mV Note: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options. Model Number Key MW172 K B 05 03 F 01 Modification Designator. "01" is standared part, "02" and higher denotes a modified model. Input Receptacle. See Below for options. "F" receptacle (IEC320, C14 type, grounded) is standard. Output Connector. "03" connector is standard. See below. Other output connectors available. Contact the factory for more details Output Voltage: 05=5V, 06=6V, 09=9V, 12=12V, 15=15V, 18=18V, 24=24V, 48=48V. Design Revision Changes Manufacturing Location Product Family Input Receptacle Options DESKTOP OPTIONS WALL-PLUG OPTIONS IEC320 IEC320 IEC320 N. America N. America Europe United Australia C14 C18 C8 Japan Japan Kingdom Grounded Ungrounded "Shaver" Fixed Fixed Fixed Fixed Interchangeable (F) (Q) (N) (B) (C) (M) (G) (E) Notes: 1. For Desktop options, choose the applicable letter above. 2. For Wall-plug options, choose the applicable letter above. The model will then be fitted only with the receptacle chosen. The North American blade version (B) will be an interchangeable blade. The other options (C), (M), (G), and (E), will be fixed blades molded in the case. 3. Blade Kit is available which will include one each of a EU, UK, and Aust blade. Kit part number is KT1027K . Can be used with (B) version only, to allow blades to be interchanged. 2 of 3 ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com MW170KB Universal 15-18 Watt Power Supply Medical Switch Mode Power Supply 3 Year Warranty 2007 Energy Independence and Security Act - EISA The Energy Independence and Security Act of 2007 was passed in December of 2007 and addresses minimum efficiency standards and standby levels for Class A external power supplies that are 250 Watts and under. This law stipulates that external power supplies manufactured on July 1, 2008 and beyond meet certain minimum efficiency and standby criteria as defined below. Minimum Efficiency Criteria: Active mode is defined as when a power supply’s input is connected to a line voltage AC and it’s output is connected to a DC or AC load, drawing a portion of the product’s power output. Depending upon the power rating for the power supply, it must meet the minimum efficiency criteria outlined below. Energy-Efficiency Criteria for Active Mode: Output Power on Adapter Label Minimum Average Efficiency Percentage 0 to < 1 Watt ≥ 0.50 * output power on the label > 1 watt to ≤ 51 watts ≥ [0.09 * Ln (output power on adapter label)] + 0.50 > 51 watts ≥ 0.85 Energy Consumption Criteria for No Load Mode: The power supply must also meet a requirement for when its input is connected to line voltage AC but its output is not connected to a load. Depending upon the power output of the supply, it must keep its energy consumption below the following values: Output Power on Adapter Label Maximum Power Consumption in No-Load Mode 0 to < 250 Watts ≤ 0.50 watts Output Connector Information Notes: 1. Center Contact = Positive 2. Connector is Switchcraft 760 plug or equivalent. 3. Suggested Mating Connector is Switchcraft 712A jack or equivalent. 4. Other output connector options are available. Contact your local representative for details. Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 2-15-2009 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. 3 of 3 ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com