SL POWER PENB1035B5600F01

PENB1035B Universal 56V, 35W (IEEE802.3at Compliant) PoE Gigabit 3 Year Warranty •10/100/1000 (MbPS) Data Rates •Self-contained Injector •100-240Vac Universal Input •IEEE802.3at Compliant Detection, Disconnect, Overload, and Overvoltage Control Function •Load Diagnostic LEDs •Overload Shutdown and Short Circuit Protection •Regulated Output with Low Ripple •Compliant to UL/IEC/EN60950-1 •LPS (Limited Power Source) Compliant Description The PENB1035 Series of Power-over-Ethernet (PoE) adapters operate from a 90 to 264Vac input range, and provide up to 35W of output power at an output voltage of 56Vdc. These models are capable of operating with Gigabit Data rates, and are available in IEEE802.3at compliant and non-compliant versions. Features include power and diagnostic LEDs, and overvoltage, overload, and short circuit protection. Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated AC Input 90-264Vac, 47-63 Hz single phase MTBF 100K hours, calculated Input Current 1.5A @ 90Vac Hold-Up Time 10mS min. @ 115Vac, 60Hz 0.75A @ 180Vac 60mS min. @ 230Vac, 50Hz Inrush Current 60A peak, cold start Efficiency See models’ chart Input Protection Internal Primary Fuse (3.15A/250V) provided Turn On Time 2.0 sec max. @ 115Vac, 60Hz 2.0 sec max. @ 230Vac, 50Hz Dialectric Withstand 4242Vdc Primary – Secondary, 2,150Vdc Output Rise Time 100mS max. @ 115Vac, 60Hz Primary – GND, 500Vdc Secondary - GND 100mS max. @ 230Vac, 50Hz Earth Leakage Current <250µA @ 264Vac, 60Hz Short Circuit Protection 10 minutes max @264Vac/60Hz Output Power 35W continuous, convection cooled Overvoltage Protection Provided Ripple and Noise See chart Operating Temperature 0° to +40°C Output Voltage See chart Storage Temperature -30° to +85°C Total Regulation See chart Relative Humidity 5% to 95%, non-condensing Case Material 94V-0 Black Polycarbonate Altitude 0 to 10,000 ft Dimensions W: 2.13” x L: 5.24” x H: 1.38”. Weight: 180g Safety Standards UL/IEC/EN60950-1, CE, CB Models Max. AC Input Model Output Output Current Ripple Regulation Power Receptacle² Number Voltage Min Max & Noise¹ Line Load PENB1035B5600F01 56Vdc 0A 0.6A 560mV pk-pk 35W ±1% ±5% IEC320, C14 Notes: 1. Measured at 20MHz bandwidth, with noise probe directly across output terminals, and load terminated with 0.1μF ceramic and 10μF low ESR electrolytic capacitors. Input Receptacle Options: "F" = IEC320 "Q" = IEC320 "N" = IEC320 C14 C18 C8 Class I - Class II - Class II - Grounded Ungrounded Ungrounded ______________________________________________________________________________________________________________________________ 1 of 2 SL Power Electronics Corp• 6050 King Drive Ventura, CA 93003• Phone 805.486.4565• Fax 805.832.6131• Email: info@slpower.com• www.slpower.com PENB1035B Universal 56V, 35W (IEEE802.3at Compliant) PoE Gigabit 3 Year Warranty EMI/EMC Compliance Emissions EN55022, EN55024 Static Discharge Immunity EN61000-4-2 Radiated RF Immunity EN61000-4-3 EFT/Burst Immunity EN61000-4-4 Line Surge Immunity EN61000-4-5 Conducted RF Immunity EN61000-4-6 Power Frequency Magnetic Field Immunity EN61000-4-8 Voltage Dip Immunity EN61000-4-11 Line Harmonic Emissions EN61000-3-2 Flicker Test EN61000-3-3 Outline Drawing Pinout: “Personalized PoE”: SL Power can “personalize” your PoE adapter products in many ways: Custom Label Artwork. Custom Safety Agency Approvals Mounting bracket options Input/Output Cables/cords Data Input Power & Data Out Custom packaging Contact your local SL Power Sales Representative for details. Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 9/17/2012 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ 2 of 2 SL Power Electronics Corp• 6050 King Drive Ventura, CA 93003• Phone 805.486.4565• Fax 805.832.6131• Email: info@slpower.com• www.slpower.com