SL POWER PENT1040A5600F01

PENT1040A Universal 40 Watt (IEEE802.3af Non-Compliant) High Power PoE Gigabit Injector • 10/100/1000 (MbPS) Data Rates • Self-contained Injector • 100-250VAC Universal Input • Desktop Style / Non-vented Case • IEEE802.3af Non-Compliant • Power ON LED • Over Load Shutdown and Short Circuit Protection • Regulated Output With Low Ripple • Complies with EMI/RFI Regulations • CE Compliant International Safety Standard Approvals Specifications Output Specifications General Specifications Combined Line and Load Excluding Cord ±1% Topology Switching-Fixed Voltage Regulation Frequency Flyback Ripple 1% Vp-p max. Dielectric Withstand Primary-Secondary 3000VAC, 4250VDC Secondary-Ground 500VDC Transient Response 0.5ms for 50% Load Change Typical Spacing 5mm Primary-Secondary Protection Foldback Overcurrent Leakage Current Less than 250 uA Protection, Efficiency 75.1% min. Short Circuit Protection EMC Information Emissions FCC Part 15. Class B Input Specifications EN55022. Class B Harmonic EN61000-3-2 AC Input Voltage Range 100-250VAC -10%, +6% VFF EN61000-3-3 Line Frequency 47-63Hz ESD EN61000-4-2. Level 2 RF EFI EN61000-4-3. Level 2 AC Input Current 1A max. EFT EN61000-4-4. Level 2 Protection Internal Primary Surge EN61000-4-5. Level 3 Current Fuse, CDI EN61000-4-6. Level 2 Inrush Limiting CD EN61000-4-8. Level 1 Voltage Dips EN61000-4-11 CE LVD, EMC, RoHS, WEEE, CE Compliant Environmental Specifications Hold-up Time @120VAC 18ms min. typ. Thermal Performance Operating Temperature 0° C to 40° C No Derating, Storage Temp -30° C to +85° C Convectional Cooling Approvals and Safety cULus : UL/CSA60950 Non Vented Case Standards TUV : EN60950 Relative Humidity Non-Condensing 5% to 95% CE: LVD, EMCD Altitude 0-10,000 feet SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com PENT1040A Universal 40 Watt (IEEE802.3af Non-Compliant) For the most current data and application support visit www.slpower.com High Power PoE Gigabit Injector Output Currents Output Max Ripple Ault Part Number Voltage Min Max Watts Vp-p max. PENT1040A5600F01 56 V 0.00 A 0.71 A 40 W 560 mV Ault Part Number Key PENT 1 040 A 56 00 F 01 Product Number of Output Configuration Output Output Input Standard Family Outputs Wattage Type Voltage Connector Configuration (no modifications Name or special packaging) Input Configuration Pin Connections IEC320 IEC320 N. America/ Europe Australian Shaver United IEC320 IEC320 N. America/ Europe Australian Shaver United w/ground w/o ground Japan (M) Kingdom (E) w/grouC n 8d w/o ground Japan (M) (E) C8 Kingdom C14 C18 (B) C14 (N) C18 (B) (N) (G) (G) (F) (Q) (F) (Q) 87654321 87654321 General Specifications (continued from p. 1) MTBF 100,000 Calculated Hours J2 J1 Weight (excluding cord) 7 Ounces, 200 Grams (Power and Data Out) (Data In) Case and Dimension 5.24L x 2.13W x 1.42H (in) (Rear of Unit) 133.0L x 54.0W x 36.0H (mm) Case Material Black 94V0 PoE Gigabit Pin-out Connections: Polycarbonate + Data POWER ( ) Pins 4/5 (Data + PWR) Cord and Connectors Dual RJ45 jacks built into the enclosure Data Pins 1/2 (Data Only) Personalized PoE Data Pins 3/6 (Data Only) Options (additional costs may apply): Data POWER (-) Pins 7/8 (Data + PWR) • Custom label artwork • Custom agency approvals available Note: = Transformer • Surge protection (Input & Output) • Mounting bracket • Custom PoE modifications SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.8/28/08