SL POWER PENT1080B5600F01

PENT1080 80 Watt Power over Ethernet Injectors Compliant/Non-Compliant, 10/100 and Gigabit Injectors 2 Year Warranty •10/100 and 10/100/1000 (MbPS) Data Rate models •Self-Contained Injector •100-240VAC Universal Input •Desktop Style/Non-vented case •IEEE802.3af Detection and Disconnection Compliant, and Non-Compliant models •Power ON LED •Overload Shutdown and Short Circuit Protection •Regulated Output with Low Ripple Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input MTBF 100-240VAC, -10%,+6%, 47-63 Hz single phase. >100,000 hours (calculated) Input Current Hold-up Time 115VAC: 1.4A, 230VAC: 0.7A. 16.7 ms min. @ 115VAC, 20mS min. @ 230VAC Inrush Current Overvoltage Protection Inrush limiting provided. Built-in, latch off Input Fuses Overload Protection Internal Primary Current Fuse is provided. Foldback Mode Earth Leakage Current Short Circuit Protection Class II: <250μA, Class I: <750μA. Hiccup Mode Efficiency Topology 80% typical. Flyback Switching Type Output Power Safety Standards nd 80W continuous. EN/IEC/UL 60950-1, CSA22.2, No. 950, 2 Edition Ripple and Noise Isolation 1% pk-pk max., 20MHz BW, differential mode. Input-Output: 3000VAC Output Voltage Operating Temperature See chart. 0° to 40°C, no derating Line & Load Voltage Regulation Storage Temperature Excluding Cord: +/- 1%. -20 to +85°C. Minimum Load Relative Humidity Not required. 5% to 95%, non-condensing Transient Response Altitude 500μs max., 50% load step, typical. 0 to 10,000 ft. Case Dimensions: Case Material: Desktop Style: 8.34” x 2.24” x 1.48”. Black 94V-0 rated Polycarbonate Output Connections: Power ON LED: Dual RJ-45 jacks built-in. Provided on all models ______________________________________________________________________________________________________________________________ 1 of 2 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com PENT1080 80 Watt Power over Ethernet Injectors Compliant/Non-Compliant, 10/100 and Gigabit Injectors 2 Year Warranty Model Number Output Volts Output Current (max) Max Watts Ripple (Vp-p max) PENT1080A5600F01 56 V 1.42 A 80.0 W 560mV EMC Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. Emissions EN55022 Class B, FCC Part 15, Class B. Static Discharge Immunity EN61000-4-2, CD Level 2, AD Level 3, Criteria B Radiated RF Immunity EN61000-4-3, Level 2, Criteria A EFT/Burst Immunity EN61000-4-4, Level 2, Criteria A Line Surge Immunity EN61000-4-5, Level 3, Criteria B Harmonic EN61000-3-2, Class A Model Number Key PENT 1 080 A 56 00 F 01 Model Configuration: 01 = Standard. 02 and higher indicates a modified model. "F" = IEC320 C14 grounded, "Q" = IEC320 C14 ungrounded, Input Connector: "N" = IEC320 C8. (see chart below) Output Connector: "00" = Dual RJ45 jacks Output Voltage: "56" = 56Vdc A = Non-Compliant, Gigabit, B = Compliant Gigabit, Model Configuration: C = Non-Compliant 10/100baseT, D = Compliant 10/100baseT Output Power: "080" = 80 Watts # of Outputs Product Family: "P" = PoE, "E" = External, "NT" = New Technology Output/Data Connections Input Receptacle Options IEC320 - C8 IEC320 - C14 IEC320 - C14 "Shaver" Grounded Ungrounded J2 J1 (N) (F) (Q) (Power & Data Out) (Data In) PENT1080 Pinout Connections: J1 J2 Data (Gigabit only) Pins 4/5: Data (Gigabit Only) + Pwr) "Personalized" PoE Options (contact factory for cost/availability): Data Pins 1/2 (Data + Pwr) Custom label artwork



Data Pins 3/6 (Data + RTN)



Custom agency approvals available Data (Gigabit only) Pins 7/8: Data (Gigabit Only) + RTN)



Surge protection (input & output)



Mounting bracket Note: = Transformer



Other modifications Data Sheet © 2011 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 8-24-2011 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ 2 of 2 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com