SL POWER PW116MA2403F01

PW116 ITE 60-90 WATT SERIES #3 Connector pictured PW116 SWITCH-MODE PW116 POWER SUPPLY Voltage Max Max Ault Part No. DC Amps Watts • 100-250 VAC Universal Input PW116XA05XX_01 5V 12.0 60.0 • Desktop Style PW116XA06XX_01 6V 10.0 60.0 PW116XA09XX_01 9V 7.80 70.0 • Single Output to 90W PW116XA12XX_01 12V 6.67 80.0 • Regulated Output With Low Ripple PW116XA14XX_01 13.5V 6.15 83.0 • Meets Safety Agency Requirements PW116XA15XX_01 15V 6.00 90.0 • Complies With EMI/RFI Regulations PW116XA16XX_01 16V 5.60 90.0 • CE Compliant PW116XA1803_01 18V 5.00 90.0 • Impact Resistant Polycarbonate Enclosure PW116XA2403_01 24V 3.75 90.0 • Private Label Marking Available PW116XA4803_01 48V 1.87 90.0 • 3 Year Warranty • Modified and Custom Designs Also Available Ault Part No. Key PW116 X A 05 XX __ 01 Product Manufacturing Design Voltage Connector Input Denotes Family Location Revision DC #51 - Standard Configuration/ standard Name (volume Changes 16V and Model Type or custom dependent) under; #3 - (see pg. 2) requirements Standard 18V and over AULT INCORPORATED 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com © Copyright 2005 Ault Inc. PW116 ITE 60-90 WATT SERIES Input Electrical Voltage 100-250 VAC -10%, +6% Topology Switching - Fixed frequency 100KHz Line Frequency 47 - 63 Hz Efficiency Up to 89% Current 2.0A max. at 90 VAC input EMI Complies with EMC Directives Protection Internal primary current fuse, CE CE Compliant Inrush limiting MTBF 100,000 Calculated Hours Minimum Power Factor Correction Complies with EN61000-3-2 and EN61000-3-3 (active) Environmental Operating Temperature 0º to 40º C with no derating Output Storage Temperature -30º to +85º C Combined Line and Load ±1% excluding cord Voltage Regulation Relative Humidity 5% to 95% non-condensing Ripple 1% V p-p max Altitude 0-10,000 feet Transient Response 0.5 msec. for 50% load change typical Cooling Convectional - non vented case Holdup Time 16 msec min. over entire input range Protection Foldback overcurrent protection Mechanical Short circuit protection Case and Dimensions LP7 - Desktop Cord and Connector 5V and 6V: 6 ft, 6 conductor, 18 AWG, 5.08L x 3.05W x 1.67H (in) Ault #51 connector. Pinout: Pins 1, 2, 3 = 129L x 77W x 40H (mm) +V; 4, 5 and 6 = common. 9V, 12V, 13.5V, 15V, 16V: 6 ft, 4 conductor, 18 AWG, Ault Case Material 94V0 polycarbonate; black is standard #51 connector. Pinout: Pins 1,4=+V; 3, color; other colors available - extra 6=common. All with overmolded Ferrite charges may apply core. 18V, 24V, 48V,: 6 ft, 2 conductor, 18 AWG with overmolded Ferrite core, Ault Weight 13 ounces, 370 grams #3 connector, center positive. (excluding cord) Safety Approvals Agency Listings cULus60950, TUV/IEC EN60950, Australian, Japanese certification available - extra fees apply Input Configuration Connectors IEC320 IEC320 w/ground w/o ground C14 C18 (F) (Q) In case IEC320 type: F=Class I C14 inlet Q=Class II C18 inlet Specify the Input Configuration Code in your order. AULT INCORPORATED 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com © Copyright 2005 Ault Inc.