SL POWER PW122RA4803F01

PW122 ITE 120 WATT SERIES PW122 SWITCH-MODE PW122 POWER SUPPLY Voltage Max Max Ripple Ault Part No. DC Amps Watts p-p Max • 100-240 VAC Universal Input PW122XA12XXF01 12V 10.00 120.0 120mV • Desktop Style PW122XA24XXF01 24V 5.00 120.0 240mV PW122XA48XXF01 48V 2.50 120.0 480mV • Single Output to 120W • Regulated Output With Low Ripple • Meets Safety Agency Requirements Ault Part No. Key Ault Part No. Key • Complies With EMI/RFI Regulations PW122 X A 05 XX __ 01 • CE Compliant Product Manufacturing Design Voltage Connector Input Standard (no Family Location Revision DC #51 - Standard Configuration/ modifications, • Impact Resistant Polycarbonate Enclosure Name (volume Changes 12V; #3 - Model Type special artwork dependent) Standard 24V (see pg. 2) or special and 48V packaging) • Private Label Marking Available • 3 Year Warranty • Modified and Custom Designs Also Available AULT INCORPORATED 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com © Copyright 2002 Ault Inc. PW122 ITE 120 WATT SERIES Input Electrical Rated Voltage 100-240 VAC Earth Ground Less than 750 uA Leakage Current Operating Voltage 90-264 VAC Efficiency 86%Typical Line Frequency 47-63 Hz EMI Complies with EMC Directives Current 2A max.at 90 VAC input CE CE Compliant Protection Internal primary current fuse MTBF Min. 100,000 Hours Power Factor Correction Complies with EN61000-3-2 and EN61000-3-3 (active) Environmental Output Operating Temperature 0º to 40º C with no derating Combined Line and Load ±1% excluding cord Storage Temperature -30º to +85º C Voltage Regulation Relative Humidity 5% to 95% non-condensing Ripple see table Altitude 0-10,000 feet Transient Response 0.5 msec. for 50% load change typical Cooling Convectional - non vented case Holdup Time 16.7 msec min.over entire input range Protection Overcurrent protection, Mechanical Short circuit Protection Case and Dimensions 9.0L x 2.9W x 2.0H (in) Cord and Connector 12V: 6 ft, 4 conductor, 18 AWG, Ault #51 229L x 74W x 51H (mm) connector, Pinout: Pins 1-4=+V; 3, 6=common with overmolded Ferrite Case Material 94V0 polycarbonate; black is standard core. 24V & 48V: 5 ft, 2 conductor, 18 color; other colors available - extra AWG, with overmolded Ferrite core, charges may apply Ault #3 Connector, center positive. Weight 24 ounces, 684 grams (excluding cord) Safety Approvals Agency Listings cULus60950, TUV/IEC EN60950, Australian, Japanese certification available - extra fees apply Input Configuration Connector IEC320 w/ground C14 (F) AULT INCORPORATED 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com © Copyright 2002 Ault Inc.