SL POWER PW136RA1203M01

PW136 ITE 23-60 WATT SERIES Photo shows Ault #3 Connector PW136 SWITCH-MODE PW136 POWER SUPPLY Voltage Max Max Ripple Ault Part No. DC Amps Watts p-p Max • 100-250 VAC Universal Input PW136RA0351_01 3.3V 7.00 23.1 50mV • Desktop / Wallmount Styles PW136RA0551_01 5V 6.00 30.0 50mV PW136RA0751_01 7V 5.50 38.5 70mV • Single Output Up to 60W PW136RA0951_01 9V 5.50 49.5 100mV • Regulated Output With Low Ripple PW136RA1203_01 12V 5.00 60.0 120mV • Meets Safety Agency Requirements PW136RA1503_01 15V 4.00 60.0 150mV • Complies With EMI/RFI Regulations PW136RA1803_01 18V 3.33 60.0 180mV • CE Compliant PW136RA2403_01 24V 2.50 60.0 240mV • Impact Resistant Polycarbonate Enclosure PW136RA4803_01 48V 1.25 60.0 480mV • Private Label Marking Available • 3 Year Warranty Ault Part No. Key Ault Part No. Key • Modified and Custom Designs PW136 R A 05 51 __ 01 Also Available Product Manufacturing Design Voltage Connector Input Standard (no Family Location Revision DC Configuration/modifications, Name (volume Changes Model Type special artwork dependent) (see pg. 2) or special packaging) AULT INCORPORATED 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com © Copyright 2004 Ault Inc. PW136 ITE 23-60 WATT SERIES Input Electrical Voltage 100-250 VAC -10%, +6% Topology Switching-fixed frequency flyback Line Frequency 47-63 Hz Dielectric Withstand 3000VAC, 4242 VDC primary-secondary 1500 VAC, 2121 VDC primary-GND Current 1.0 Amp max. at 90 VAC input Spacing 6.4mm primary-secondary Protection Internal primary current fuse, Inrush limiting, Thermal shutdown Efficiency Up to 85% EMI Complies with EMC Directives Output CE CE Compliant Combined Line and Load ±1% (excluding cord) MTBF 100,000 Calculated Hours Minimum Voltage Regulation Ripple See table Environmental Transient Response 0.5 msec. for 50% load change typical Operating Temperature 0º to 40º C with no derating Holdup Time 18 msec min. @ 120 VAC Storage Temperature -30º to +85º C 80 msec min. @ 240 VAC Relative Humidity 5% to 95% non-condensing Protection Overcurrent protection, Short circuit Protection Altitude 0-10,000 feet Cord and Connectors 6 ft, 2 conductor, 18 AWG Cooling Convectional-non vented case #3 connector for 12V and higher models; #51 connector for 9V and lower models. Other connectors also available. Mechanical Case and Dimensions All Models 3.92L x 2.58W x 1.61H (in) Safety Approvals 100L x 66W x 41H (mm) Agency Listings cULus 60950, TUV/IEC EN60950 Case Material Black 94V0 Polycarbonate Weight Max. 10 ounces, 285 grams (excluding cord) Input Configuration Connector IEC320 IEC320 N. America/ Europe United w/ground w/o ground Japan (M) Kingdom C14 C18 (B) (G) (F) (Q) Specify the Input Configuration Code in your order. Pinout Code Center contact: positive Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order AULT INCORPORATED 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com © Copyright 2004 Ault Inc.