SL POWER PW152KA1503F01

PW152 Universal 50 Watt Series ITE / Switch Mode Power Supply 3 Year Warranty • 100-250 VAC Universal Input • Desktop Style • Single Output to 50W • Seven Models Available; 5V to 48V • Regulated Output with Low Ripple • Impact Resistant Polycarbonate Enclosure • Modified and Custom Designs • No Load Power Consumption < 0.75W • Meets ENERGY STAR Program Requirements see reverse side for details International Safety Standard Approvals Specifications Output Specifications General Specifications Line and Load Excluding cord +/-1% Topology Switching-Fixed Voltage Regulation Frequency Flyback Ripple 1% Vp-p max. Efficiency 5V and 9V 70% min. 12V to 24V ≥ 84% Transient Response 0.5ms for 50% Load change Typical Hold-up Time @120VAC 18ms min. @240VAC 80ms min. Protection Over-current Protection (Hiccup) Dielectric Withstand 3,000VAC, 4,250VDC Short Circuit Protection Primary-Secondary Storage Temp -30° C to 85° C Input Specifications Approvals and UL60950-1, Safety Standards IEC/EN60950-1 Input Voltage Range Universal input 100-250VAC -10%, +6% EMC : EN55022 / 55024 Line Frequency 47-63Hz 61000 Input Current 90VAC Input 1.2A max. MTBF 100,000 Calculated Hours Protection Internal Primary Case and Dimension JEC#18 Current Fuse, 4.49L x 2.36W x 1.38H (in) Inrush Limiting 114.0L x 60.0W x 35.0H (mm) Case Material Black 94V0 Polycarbonate Environmental Specifications Cord and Connectors 6ft. 2 Conductor, 18AWG, Thermal Performance Operating temperature 0° C to 40° C AULT#3 Connector. full load, no derating Other connectors are convectional cooling also available. Non vented case Relative Humidity Non-condensing 5% to 95% Altitude 0-10,000 feet SL Power Electronics Corp • 6050 King Drive • Ventura CA, 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com PW152 Universal 50 Watt Series For the most current data and application support visit www.slpower.com ITE / Switch Mode Power Supply Output Currents Output Max Ripple Ault Part Number Voltage Min Max Watts Vp-p max. PW152KA05XX* 5 V 0.00 A 6.00 A 30.0 W 50 mV PW152KA09XX* 9 V 0.00 A 5.00 A 45.0 W 90 mV PW152KA12XX 12 V 0.00 A 4.20 A 50.4 W 120 mV PW152KA15XX 15 V 0.00 A 3.33 A 50.0 W 150 mV PW152KA18XX 18 V 0.00 A 2.80 A 50.4 W 180 mV PW152KA24XX 24 V 0.00 A 2.00 A 48.0 W 240 mV PW152KA48XX* 48 V 0.00 A 1.00 A 48.0 W 480 mV Ault Part Number Key Pin Connections PW152 K A 05 XX Product Manufacturing Design Voltage Connector Family Location Revision DC Number Name Changes Input Configuration Pinout Code Center contact: positive IEC320 IEC320 N. America/ Europe Australian Shaver United Description Switchcraft 760 plug or equivalent w/ground w/o ground Japan (M) (E) C8 Kingdom C14 C18 (B) (N) (G) (F) (Q) Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order Specify the Input Configuration Code in your order. Energy Star Specifications Power Supplies that are single voltage external AC to DC and AC to AC included with other retail products and single voltage external AC to DC or AC to AC power supplies sold separately; and consumer audio and video equipment, which includes compact audio products, DVD players and recorders as well as television adapters. (Please refer to the reverse side of data sheet for specifications and marking protocol.) Energy-Efficiency Criteria for Active Mode To be eligible for ENERGY STAR qualification, an external power supply must meet or exceed a minimum efficiency for Active Mode, which varies based on the model’s nameplate output power. The table below outlines the equations for determining minimum average efficiency. Nameplate Output Power Minimum Average Efficiency in Active Mode 0 to ≤ 1 watt ≥ 0.49 * Pno > 1 to ≤ 49 watts ≥ [0.09 * Ln (Nameplate Output)] + 0.49 > 49 watts ≥ 0.84 Energy Consumption Criteria for No Load The second half of the ENERGY STAR specification is the No-Load power requirement, which specifies the maximum AC power that may be used by a qualifying external power supply in the No-Load condition. Maximum power consumption levels for No-Load Mode are provided below. Nameplate Output Power Maximum Power in No-Load 0 to < 10 watts ≤ 0.5 watts ≥ 10 to ≤ 250 watts ≤ 0.75 watts *Does not meet Energy Star requirements SL Power Electronics Corp • 6050 King Drive • Ventura CA, 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com Data Sheet © 2006 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.9/22/06