SL POWER PW180KB4800F01

PW180KB Power over Ethernet IEEE802.3af Compliant Power over Ethernet (PoE) / SMPS 3 Year Warranty • PoE Injector and Power Supply in One Unit • Universal Input 100 to 250 VAC • Desktop Style Single Output • Ideal for Midspan Applications • Regulated Output with Low Ripple • Meets Safety Agency Requirements • Complies with EMI/RFI Regulations • CE Compliant • Impact Resistant Polycarbonate Enclosure • Private Label Marking Available • Modified and Custom Designs Also Available International Safety Standard Approvals Specifications Output Specifications General Specifications Voltage +48VDC Typical, 44V to 57V Topology Switching-Fixed Frequency Flyback Load Regulation +/-4%, 44V to 57V Dielectric 3,000VAC or 4,250VDC Ripple and Noise f < 500kHz 500mVp-p Withstand Primary-Secondary 500Hz-150kHz 200mVp-p 150kHz-500kHz 150mVp-p Output Current 350mAdc min. 500kHz-1MHz 100mVp-p Inrush Current 450mAdc max. Transient Response 0.5ms for 50% Overload Current Detection (15.4W/Vport)min. / Load change Typical 400mA max. Pin Assignment (see page 2) Overload Time Limit 50-75ms Short Circuit Protection 400-450mA max. Input Specifications Continuous Output Power 15.4W min. Voltage 100-250VAC -10%, +6% Average over 1 second. Line Frequency 47-63Hz Approvals and UL60950-1, IEC/EN60950-1 Safety Standards EMC : EN55022 / 55024 / 61000 Input Current 90VAC Input 0.5A max. Weight 5.95 ounces, 170 Grams Protection Internal Primary Current Fuse, Inrush Limiting Leakage Current Less than 0.75mA at 265VAC 50Hz Spacing 6.4mm Primary-Secondary LED Indicator Case and Dimension Desktop Style Power Mode LED Amber - Power ON 3.98L x 2.40W x 1.35H (in) (Two colors) / Detection Mode 101.0L x 61.5W x 34.2H (mm) Green - Injecting Full Power / Power Up Mode Case Material Black 94V0 Polycarbonate Cord and Connectors Dual RJ45 Jacks built into the enclosure. SL Power Electronics Corp • 6050 King Drive • Ventura CA, 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com PW180KB Power over Ethernet IEEE802.3af Compliant For the most current data and application support visit www.slpower.com Power over Ethernet (PoE) / SMPS Output Currents Output Max Ripple Ault Part Number Voltage Min Max Watts Vp-p max. PW180KB4800_01 48 V 0.00 A 0.35 A 15.4 W 480 mV Ault Part Number Key PW180 K B 48 00 _ 01 Product Manufacturing Design Voltage Connector Input Standard Family Location Revision DC Number Configuration/ (no modifications Name Changes Model Type or special packaging) Input Configuration Pin Connections IEC320 IEC320 N. America/ Europe IE A Cu 3s2 t0 ralian IS Eh Ca 3v 2e 0r N. America/ Europe Australian Shaver United United w/ground w/o ground Japan (M) w (E /g )round w C8 /o ground Japan (M) (E) C8 Kingdom Kingdom C14 C18 (B) C14 C (N 18 ) (B) (N) (G) (G) (F) (Q) (F) (Q) Specify the Input Configuration Code in your order. 87654321 87654321 J1 J2 J1 Pins J2 Pins 1. Data Pair 1 1. Data Pair 1 2. Data Pair 1 2. Data Pair 1 3. Data Pair 2 3. Data Pair 2 4. + VDC 4. No Connection 5. + VDC 5. No Connection 6. Data Pair 2 6. Data Pair 2 7. - VDC 7. No Connection 8. - VDC 8. No Connection SL Power Electronics Corp • 6050 King Drive • Ventura CA, 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:info@slpower.com • www.slpower.com Data Sheet © 2006 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.9/28/06