SL POWER SPF-500-28
Specifications
Manufacturer
SL Power
Manufacturers Part #
SPF-500-28
Brand
Condor
Series
SPF-500
Factory Pack Quantity
27
Cooling Method
Air-Cooled
Dimensions
11.00 x 5.00 x 2.50"
Efficiency
75%
Isolation
50 VDC
Mechanical Style
Open / Enclosed Frame
Mounting
Chassis
Number of Outputs
1
Operating Temperature
0 to + 50°C
Output Amps 1
18 A
Output Voltage V1 Nominal
28 VDC
Power
500 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
SPF-500, SPF-750, SPF-1000 Commercial Series 500-1000 Watts Single Output, Forced Current Sharing FEATURES: Forced current sharing for N +1 redundancy Universal ac input 0.99 typical power factor Low ripple and noise Dc power good and ac power fail signals True remote inhibit Monotonic turn-on and turn-off Temperature Range: 0° to 50°C at full ratings. Safety Agencies: Most models are approved to UL1950; CSA SPECIFICATIONS: 22.2 #234; IEC 950 and TÜV EN60950, Class 1 SELV., CE 72/23/ INPUT EEC/93/68EEC (low voltage directive). Ac Input: 90-264 Vac continuous range, 47 to 63 Hz. 750 W Conducted RFI: Meets FCC Part 15, Class A; EN55022 Class B. units fused for 15 A. 1000 W units fused for 20 A. Output Isolation: Isolated from ground 50 Vdc. Power Factor: 0.99 typical at full load. Meets EN61000-3-2 Class A. Cooling: Self cooled by internal ball-bearing fans. Inrush: Cold start ac current is less than 50 A at 115 Vac and 100 A at 230 Vac for 500 W and 750 W models; 90 A at 115 Vac OPTIONS: and 180 A at 230 Vac for 1000 W models. Limited by thermistor. Consult factory for available options. Brownout Protection: Continuous range units hold regulation to 85 Vac. Holdup Time: 20 ms minimum after removal of power at full load. Efficiency: 75% typical. AC INPUT (90-264 VAC Continuous Range) Ac Power Fail: Provides TTL “0” 5 ms before output voltage FUNCTION 115 VAC* 230 VAC CONNECTOR goes out of regulation band upon loss of power. Te B1-(L)L1 in Lp ine Barrier stri OUTPUT Adjustability: User adjustable ±5% minimum. Tl B1-(N)N2 eutraLs ine #6-32 screws 3/8 center Line & Load Reg: ±1% over ac input range and 0 to 100% load Td B1-(GND)Sd afety Groun Safety Groun change. DC OUTPUT Ripple & Noise: Less than 1% p-p or 100 mV, whichever is FUNCTION MODEL LOCATION CONNECTOR greater. Remote Sense: Compensates for 250 mV total line drop. Open Os utputAV ll SPF-500 modelTL erminal + Bus bars #8-32 screws 2P sense lead protection. (See Redundancy, below.) Terminal -V Temperature Coefficient: 0.02% per degree C. Vs oltageAV ll SPF-750 modelTL erminal + Bus bars #1/4-20 screws 2P Stability: 0.1% over 8 hours after 30 minutes warm-up. Transient Response: Output voltage returns to within 1% in less Terminal -V than 500 µs for a 50% load change. Peak transient does not SV PF-1000-24,28,36,48TL erminal + Bus bars #10-32 screws 2P exceed 5%. Overload Protection: All outputs are protected against overload Terminal -V and short circuit. Automatic recovery upon removal of fault. Overvoltage Protection: Protects load against power supply induced overvoltage. Trip point is factory set so that output voltage cannot exceed 136% of nominal. STATUS AND CONTROL Remote Inhibit: Contact closure to the negative sense line or a FUNCTION SPF-500 SPF-750 SPF-1000 CONNECTOR TTL level “0” turns off dc output. Dc Power Good (5 V Outputs): Provides a TTL “1” open R) emote SenseJ) 1-2 (S+J) 1-5 (S+JE 3-7 (S+ AMP MTA TYP collector when output is above 4.6 V nominal. J) 1-1 (S-)J) 1-4 (S-J) 3-8 (S- #640456-6 (J1-500W Redundancy: External OR-ing diodes and forced current sharing provide “N+1” capability. Remote sense (+S) compen- P7 ower GoodJ3 1- J5 1-J) 3- or #640656-3 (J2-500W sates for additional 0.6 V diode voltage drop. When the current I5 nhibit J2 1- J4 1-J) 3- or #640656-6 (J1-750W sharing terminal is connected between units, current sharing or #640456-8 (J3- C6 urrent ShareJ6 1- J6 1- J3- remains within 10% of the unit’s full output current rating. 1000W) Reverse Voltage: Protected against reverse voltage up to supply A8 c Power FailJ1 1- J3 1-J) 3- pin headers (locking current rating. A) ux. Fan VoltageJA 2-1 (+12VN) / J3-1 (+12V ENVIRONMENTAL Thermal Protection: Shuts down power supply if overheated. JA 2-2 (Rtn)N) / J3-2 (RTN Automatic recovery. S0 ignal GroundJA 1-1 NA / N/ Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 FAX 805-487-8911 www.condorpower.com 86 SPF-500, SPF-750, SPF-1000 Single Output Commercial Model Power Out Output No. Output Output Minimum Output Total Maximum Regulation SPF-500-12 500 1 +12 V 0 A 42 A 1% SPF-500-15 500 1 +15 V 0 A 34 A 1% SPF-500-24 500 1 +24 V 0 A 21 A 1% SPF-500-28 500 1 +28 V 0 A 18 A 1% SPF-500-48 500 1 +48 V 0 A 10.4 A 1% SPF-750-12 750 1 +12 V 0 A 62 A 1% SPF-750-15 750 1 +15 V 0 A 50 A 1% SPF-750-24 750 1 +24 V 0 A 31 A 1% SPF-750-28 750 1 +28 V 0 A 27 A 1% SPF-750-48 750 1 +48 V 0 A 16 A 1% SPF-1000-24 1000 1 +24 V 0 A 42 A 1% SPF-1000-28 1000 1 +28 V 0 A 36 A 1% SPF-1000-36 1000 1 +36V 0 A 28 A 1% SPF-1000-48 1000 1 +48 V 0 A 21 A 1% SPF-500, SPF-750, SPF-1000 MECHANICAL SPECIFICATIONS SPF-500 SPF-750 SPF-1000 3.8 lb - 1.7 kg 4.7 lb - 2.1 kg 10.4 lb -4.7 kg Dimensions: Inches Millimeters Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 805-486-4565 FAX 805-487-8911 www.condorpower.com 87
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the SPF-500-28?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers





What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods