SL POWER TB110S12K

TB110S 110W Single Output Test and Measurement/Industrial Series Features  2” x 4” x 1.4” Package  Up to 110W Output Power  5V @ 1A Standby Output  Compliant to high levels of EMC per EN61000-4  15kV ESD (Air), 8kV (Contact)  4kV Surge  Meets Class B Conducted EMI with 6db margin, Class B Radiated EMI with 3db margin  Up to 90% Efficiency  >15 years e-cap life  >1,000,000 hrs. MTBF (50°C)  Universal Input 90-264Vac Input Range  DC OK Signal, Inhibit, Power Good Signals  Class I and II Input Models  3 Year Warranty Description A Superior performance 110 Watts AC to DC power supply designed to ensure easy integration into Test and Measurement and Industrial applications. Feature rich and highly efficient TB110S product family can easily fit in 1U chassis and provides up to 110Watts. Greater than 15 years operational life as determined by e-cap life calculations, and a 5V@1A standby output are key features. All models are CE marked to low voltage directive and approved to ITE standards of IEC/UL/EN60950 and CSA C22.2, 2nd edition. Model Selection 2 Model Output Output Current Ripple & Noise Total OVP 4 1 3 Number Voltage (Nom) w/Air Convection Efficiency (pk-pk) Regulation Threshold MTBF TB110S12K 12V 8.7A 6.7A 89% 120mV 500,000 ±2% 15.0± 2.0V TB110S24K 24V 4.3A 3.3A 89% 240mV ±2% 28.0± 2.5V 500,000 TB110S48K 48V 2.1A 1.6A 89% 480mV ±2% 55.0± 4.0V 500,000 Notes: 1. Efficiency values listed are typical and are measured at 115Vac input, full load output current, at an ambient temperature of 25°C. 2. Measured at 25°C ambient with noise probe directly at end of 6” twisted pair terminated with 0.1μF ceramic and 10μF low ESR capacitors. Values will be higher at ambient temperatures below 0°C. 3. MTBF values are in hours, per Telcordia SR-332, Issue 3, 25°C, full rated load (w/airflow) at 110Vac input. 4. Change the “K” suffix to “C” for Input Class II (ungrounded) models. General Specifications 85-264Vac, single phase. Main Output: <1 Seconds at 115Vac AC Input Turn On Time (Safety Approved to 90-264Vac). 5Vsb Output: <250mSec at 115Vac Main Output: <70mSec Input Current 1.8A max. at 110Vac, 0.9A max. at 240Vac Rise Time 5Vsb Output: <70mSec Main Output: 20mSec min. 40Arms max. within 1/2 line cycle, cold start at 5Vsb Output: 100mSec min. Inrush Current Hold-up Time 25°C. See application note. from loss of AC input at 115 Vac, full load, 25°C. Earth Leakage Over Load 115% - 200% of rated output current value. <500mA@264Vac, 60Hz input, NC Hiccup Mode, Auto-recovery Current Protection (OCP) www.slpower.com TB110 REV 2.1 27-OCT-16 1 TB110S 110W Single Output Test and Measurement/Industrial Series General Specifications Turn-On Input Short Circuit Short across the output terminals will not cause 70-85Vac, Full spec performance at 85Vac. damage to the unit. Hiccup Mode , Auto-recovery Voltage Protection (SCP) Turn-Off Input Over Voltage Latches off when output voltage is with range as <75Vac ± 8Vac shown in table. Requires AC Power cycle to reset Voltage Protection (OVP) Over Temperature Power shuts down at temperature of TBD (typical) at Input Fuses 3.15A, 250Vac, line and neutral inputs full load. Auto-recovery. Protection (OTP) Outputs protected against momentary reverse 12V to 48Vdc. See models chart for part Output Reverse current less than 20A peak for less than 10mS with Output Voltage numbering. 0.5A average. Sustained reverse current at high Voltage Protection levels may damage unit. Input-Output: 3000Vac +/- 10% Isolation Input-Ground: 1800Vac Voltage Adjustability Output-Ground: 500Vac Operating -20°C to +70°C. Efficiency 88% - 90% typical at 115/230Vac, 25°C. Temperature Turn on @ -40°C at >=120Vac 110W with 200LFM airflow; 80W convection Storage cooled, -20C to 50°C ambient. 85Vac to 264Vac. -40°C to +85°C Output Power Temperature See chart for de-rating above 50°C. 500µS typ. response time for return to within Operating: -500m to 5000m Transient Response 0.5% of final value for a 50% load change,∆i/∆t< Altitude Non-operating: -500 to 40,000 feet 0.2A/µs. Max. volt. deviation is ±3.5%. Minimum Load Not required. Relative Humidity 5% to 95%, non-condensing ±2.0 % for all models. Class 2 Total Regulation IPC 610 nd IEC 60950-1, 2 Edition <2% overshoot at turn-on, <1% overshoot at turn- Overshoot Safety Standards CAN/CSA – C22.2 No 60950-1 off, under all conditions. DEMKO EN60950-1 >15 Years in use condition of 40°C ambient, at >1, 000,000 hours @ 110/220Vac, 50°C, GB E-Cap Life 12h/day, 261 days/year. Additional information MTBF Telcordia SR-332 issue 3. on other use profiles available on request. Operating: Sinusoidal Frequency: 10-500Hz, Impact Operating: Half-sine shock waveform. Impact Acceleration: 1g, Sweep rate: 1 octave/min Acceleration: 20g, Pulse duration: 11mS. Cycles: 10 times per axis in X, Y, Z direction Vibration Shock Cycles: 3 times per axis in X,Y, Z direction Random Vibration: (IEC 60068-2-6) 2 Non-Operating: Half-sine shock waveform. Operating: 0.003g /Hz, 1.224grms overall, 3 axes, 10 (IEC 60068-2-27) (IEC 60068-2-64) Impact Acceleration: 50g, Pulse duration: 6mS min per axis, 1-500Hz. 2 Cycles: 3 times per direction on 3 axes (X,Y. Z) Non-Operating: 0.02g /Hz, 3.1grms overall, 3 axes, 1 hour per axis, 20-500 Hz Dimensions W: 2.0” x L: 4.0” x H: 1.4” Weight 180g, typical Auxiliary Signals Signal is high after the main output is within regulation 5Vdc @ 1A, +/-5% regulation over all Power Good/Power band upon AC turn on. Goes low with 4mS min. before 5V Standby Output: the main DC output drops below 90% of nominal value changes in main output load current. Fail: when AC turns off. Logic HIGH or open = ON Inhibit: Logic LOW or short to ground = OFF www.slpower.com TB110 REV 2.1 27-OCT-16 2 TB110S 110W Single Output Test and Measurement/Industrial Series EMI/EMC Compliance Conducted Emissions EN55022/CISPR22 Class B, FCC Part 15.107, Class B, 6db margin, typical. Radiated Emissions EN55022/CISPR22 Class B, FCC Part 15.109, Class B, 3db margin, typical. Common Mode Noise: High Frequency <90mA pk-pk, 10mA rms, <800mV pk-pk. (Class I input units). (100Khz -20 Mhz) Common Mode Noise: Low Frequency <40mA pk-pk, 5mA rms (Class I input models). (50-120 Hz) Static Discharge Immunity EN55024/IEC61000-4-2, Level 4, 8kV Contact Discharge, 15kV air discharge, Criteria A Radiated RF Immunity EN55022/IEC61000-4-3, Level 3, 10V/m, Criteria A EFT/Burst Immunity EN55024/IEC61000-4-4, Level 3, 4kV (PS Output), Criteria A; 2kV (signal outputs), Criteria B EN55024/IEC61000-4-5, Level 4, 2kV diff., 4kV Common-mode, Criteria A Line Surge Immunity EN55022/IEC61000-4-6, Level 4, 10V/m, Criteria A Conducted RF Immunity Power Frequency Magnetic Field Immunity EN55024/IEC61000-4-8, Level 4, 30A/m, Criteria A EN55024/IEC61000-4-11, Dips: 100%, 10ms; 30%, 500ms; 60%, 100ms; Voltage Dip Immunity Interruptions: 100%, 5000mS; Performance Criteria A, A, B & B Line Harmonic Emissions EN55024/IEC61000-3-2, Class A. Flicker Test EN55024/IEC61000-3-3 Notes: Performance criteria are based on EN55024. According to the standards, performance criteria are defined as following: A – Normal performance during and after the test B – Temporary degradation, self-recoverable C – Temporary degradation, operator intervention required to recover the operation D – Permanent damage Isolation Specifications Parameter Conditions/Description Min Nom Max Units Input/Ground 1800Vac Insulation Safety Rating Input/Output 3000Vac Output/Ground 500Vac Input/Ground 1800 Vac Electric Strength Test Voltage Input/Output 3000 - - Vac Output/Ground 500 Vac Connector Information Input Connector DC Output Connector Ground Connector Signal Connector J1 J2 G1 J3 PIN 1) AC Line Pin 1) (+V) Pin 3) (-V) FG PIN 1) RTN Pin 3) Power Good/Power Fail PIN 2) Empty (removed) Pin 2) (+V) Pin 4) (-V) 0.187” Quick-connect tab PIN 2) 5Vsb Output Pin 4) Inhibit PIN 3) AC Neutral Mating Connector: Mating Connector: Mating Connector: Mating Connector: Tyco/AMP 640250-3 Tyco/AMP 640250-4 Molex 01-90020005 Tyco/AMP 1375820-4 Pins: 640252-2 Pins: 640252-2 Pins: 1375819 www.slpower.com TB110 REV 2.1 27-OCT-16 3 TB110S 110W Single Output Test and Measurement/Industrial Series Mechanical Drawing Notes: 1. Overall Dimensions are 2.0:W x 4.0”L x 1.4”H. 2. Height is measured from top of highest component to longest lead protrusion on bottom of PCB. 3. Mounting holes isolated from ground for Class II designs. 4. Mounting standoff height to be >/= 5mm. A non-conductive insulator should be placed between the bottom of the unit and any conductive surface. Output Derating: 110W w/air, 80W convection cooled at -20°C to 50°C operating ambient temperature and across the entire operating AC input range of 85 to 264Vac. Derate as indicated below for temperatures above 50°C. 120 with 200LFM Air 100 Convection Cooled 80 60 40 20 0 -20 -10 0 10 20 30 40 50 60 70 Ambient Operating Temperature (°C) Data Sheet © 2016 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com TB110 REV 2.1 27-OCT-16 4 Output Power (Watts)