SL POWER TB65S36K

TB65 65W Single Output Test and Measurement/Industrial Series Features  2.0 x 3.5” x 1.3” Package  Up to 65W Convection Cooled Output Power  Compliant to high levels of EMC per EN61000-4  15kV ESD (Air), 8kV (Contact)  4kV Surge  Meets Class B Conducted EMI with 6db margin, Class B Radiated EMI with 3db margin  Up to 90% Efficiency  >10 year e-cap life  Universal Input 90-264Vac Input Range  DC OK Signal, PSU Temperature Signal  Class I and II Input Models  3 Year Warranty Description A Superior performance 65 Watts AC to DC power supply designed for Test and Measurement and Industrial applications. Feature rich and highly efficient TB65 product family can easily fit in 1U chassis and provides 65 Watts, convection cooled. Input, output and internal temperature monitoring/alarms are additional features of the TB65 family. All models are CE marked to low voltage directive and approved to ITE standards of IEC/UL/EN60950 and CSA C22.2, 2nd edition. Model Selection 2 Model Output Output Ripple & Noise Total OVP 4 1 3 Number Voltage (Nom) Current Efficiency (pk-pk) Regulation Threshold MTBF TB65S12K 12V 5.4A 88% 120mV ±3% 14.0± 1.1V 500,000 TB65S15K 15V 4.3A 88% 180mV ±3% 21.0± 2.0V 500,000 TB65S24K 24V 2.7A 90% 240mV ±3% 28.0± 2.5V 500,000 TB65S36K 36V 1.8A 88% 360mV ±3% 46.3± 3.0V 500,000 TB65S48K 48V 1.35A 90% 480mV ±3% 55.0± 4.0V 500,000 Notes: 1. Efficiency values listed are typical and are measured at 115Vac input, full load output current, at an ambient temperature of 25°C. 2. Measured at 25°C ambient with noise probe directly at end of 6” twisted pair terminated with 0.1μF ceramic and 10μF low ESR capacitors. Values will be higher at ambient temperatures below 0°C. 3. MTBF values are in hours, per Telcordia 332, Issue 6, 25°C, full rated load (w/airflow) at 110Vac input. 4. Change the “K” suffix to “C” for Input Class II (ungrounded) models. General Specifications 85-264Vac, single phase. AC Input Turn On Time <2 Seconds at 110Vac. (Safety Approved to 90-264Vac). 1.5A at 110Vac, 1A at 240Vac <30mS, 56V model: <35mS Input Current Rise Time 40Arms Maximum within a half line cycle, cold 20mS min. from loss of AC input at 110 Vac, full load, Inrush Current Hold-up Time start at 25C. See application note. 25°C. Over Load 115% - 200% of rated output current value. Hiccup I²T Characteristic See Table below. Mode, Auto-recovery Protection (OCP) www.slpower.com TB65 REV 2.3 26-SEP-16 1 TB65 65W Single Output Test and Measurement/Industrial Series General Specifications Turn-On Input Short Circuit Short across the output terminals will not cause >75Vac ± 8Vac. Full spec performance at 85Vac. damage to the unit. Hiccup Mode , Auto-recovery Voltage Protection (SCP) Turn-Off Input Over Voltage Latches off when output voltage is with range as <63Vac ± 8Vac shown in table. Requires AC Power cycle to reset Voltage Protection (OVP) Over Temperature Power shuts down at temperature of 70°C (typical) Input Fuses 3.15A, 250Vac, line and neutral inputs at full load. Hiccup Mode , Auto-recovery Protection (OTP) Outputs protected against momentary reverse Earth Leakage Output Reverse current less than 20A peak for less than 10mS with <500µA@264Vac, 60Hz input, NC 0.5A average. Sustained reverse current at high Current Voltage Protection levels may damage unit. Input-Output: 3000Vac Leakage Current <4 mA@264Vac, 60Hz input Isolation Input-Ground: 1900Vac (Output to Earth) Output-Ground: 500Vac -20°C to +70°C. Turn-On & 12V to 48Vdc. See models chart for part Turn on Temperature = -40°C at >=120Vac, allowing Output Voltage Operating numbering. [x] seconds for stabilization. Temperature De-rated output power at 70°C = 45.5W Storage Voltage Adjustability +/- 10% (+/-5% for 48V model) -40°C to +85°C Temperature 88% - 90% typical at 115/230Vac, 25°C. See chart Operating: -500m to 5000m Efficiency Altitude for additional details Non-operating: -500 to 40,000 feet 65W continuous convection cooled, -20C to 50°C Output Power ambient. 85Vac to 264Vac. See chart for de- Relative Humidity 5% to 95%, non-condensing rating above 50°C. 500µS typ. response time for return to within Transient Response 0.5% of final value for a 50% load change,∆i/∆t< IPC 610 Class 2 0.2A/µs. Max. volt. deviation is ±3.5%. nd IEC 60950-1, 2 Edition Not required. CAN/CSA – C22.2 No 60950-1 Minimum Load Safety Standards DEMKO EN60950-1 Operating: Sinusoidal Frequency: 10-500Hz, Impact Operating: Half-sine shock waveform. Impact Acceleration: 1g, Sweep rate: 1 octave/min Acceleration: 20g, Pulse duration: 11mS. Cycles: 10 times per axis in X, Y, Z direction Vibration Shock Cycles: 3 times per axis in X,Y, Z direction Random Vibration: (IEC 60068-2-6) 2 Non-Operating: Half-sine shock waveform. Operating: 0.003g /Hz, 1.224grms overall, 3 axes, 10 (IEC 60068-2-27) (IEC 60068-2-64) Impact Acceleration: 100g, Pulse duration: 6mS min per axis, 1-500Hz. 2 Cycles: 3 times per direction on 3 axes (X,Y. Z) Non-Operating: 0.02g /Hz, 3.1grms overall, 3 axes, 1 hour per axis, 20-500 Hz >10 Years in use condition of 40°C ambient, at 572,500 hours @ 110/220Vac, 25°C 12h/day, 261 days/year. Additional information E-Cap Life MTBF Bellcore issue 6. on other use profiles available on request. <2% overshoot at turn-on, <1% overshoot at turn- Overshoot Weight 140g, typical off, under all conditions. W: 2.0” x L: 3.5” x H: 1.3” Total Regulation ±1.0 % for all models. Dimensions W: 50.8mm x L: 88.9mm x H: 33.02mm www.slpower.com TB65 REV 2.3 26-SEP-16 2 TB65 65W Single Output Test and Measurement/Industrial Series Auxiliary Signals During normal operation, this signal is logic Provides resistive value indicating internal temperature HIGH. Signal will go LOW for output less than DC OK: PSU Temperature of power supply. See Temp Sensor Conversion Table 90% (typical) of nominal. Green LED will light below. on PCB top side during normal operation. EMI/EMC Compliance Conducted Emissions EN55022/CISPR22 Class B, FCC Part 15.107, Class B, 6db margin, typical. EN55022/CISPR22 Class B, FCC Part 15.109, Class B, 3db margin, typical. Radiated Emissions Common Mode Noise: High Frequency <50mA pk-pk, 6mA rms CM current. See Application Note. (100Khz -20 Mhz) Common Mode Noise: Low Frequency <50mA pk-pk, 6mA rms CM current. See Application Note. (50-120 Hz) Static Discharge Immunity EN55024/IEC61000-4-2, Level 4, 8kV Contact Discharge, 15kV air discharge, Criteria A Radiated RF Immunity EN55022/IEC61000-4-3, Level 3, 10V/m, Criteria A EN55024/IEC61000-4-4, Level 3, 4kV (PS Output), Criteria A; 2kV (signal outputs), Criteria B EFT/Burst Immunity EN55024/IEC61000-4-5, Level 4, 2kV diff., 4kV Common-mode, Criteria A Line Surge Immunity Conducted RF Immunity EN55022/IEC61000-4-6, Level 3, 10V/m, Criteria A Power Frequency Magnetic Field Immunity EN55024/IEC61000-4-8, Level 4, 30A/m, Criteria A EN55024/IEC61000-4-11, Dips: 100%, 10ms; 30%, 500ms; 60%, 100ms; Voltage Dip Immunity Interruptions: 100%, 5000mS; Performance Criteria A, A, B & B Line Harmonic Emissions EN55024/IEC61000-3-2, Class A. EN55024/IEC61000-3-3 Flicker Test Notes: Performance criteria are based on EN55024. According to the standards, performance criteria are defined as following: A – Normal performance during and after the test B – Temporary degradation, self-recoverable C – Temporary degradation, operator intervention required to recover the operation D – Permanent damage Isolation Specifications Parameter Conditions/Description Min Nom Max Units Input/Ground 1900Vac Insulation Safety Rating Input/Output 3000Vac Output/Ground 500Vac Input/Ground 1900 Vac Electric Strength Test Voltage Input/Output 3000 - - Vac Output/Ground 500 Vac www.slpower.com TB65 REV 2.3 26-SEP-16 3 TB65 65W Single Output Test and Measurement/Industrial Series Connector Information Input Connector DC Output Connector Ground Connector Signal Connector J1 J2 G1 J3 PIN 1) AC Line Pin 1) (+V) Pin 3) (-V) FG PIN 1) RTN Pin 3) TEMP SEMSOR (+) PIN 2) Empty (removed) Pin 2) (+V) Pin 4) (-V) 0.187” Quick-connect tab PIN 2) DC_OK Pin 4) TEMP SEMSOR (-) PIN 3) AC Neutral Mating Connector: Mating Connector: Mating Connector: Mating Connector: Tyco/AMP 640250-3 Tyco/AMP 640250-4 Molex 01-90020005 Tyco/AMP 1375820-4 Pins: 640252-2 Pins: 640252-2 Pins: 1375819 Mechanical Drawing Notes: 1. Overall Dimensions are 2.0:W x 3.5”L x 1.3”H. 2. Height is measured from top of highest component to longest lead protrusion on bottom of PCB. 3. Input & Output Connectors on opposite ends. 4. Mounting hole pattern: 1.75” x 3.25”. 4 holes 5. Mounting holes isolated from ground for Class II designs. Mounting standoff height to be >/= xx mm. www.slpower.com TB65 REV 2.3 26-SEP-16 4 TB65 65W Single Output Test and Measurement/Industrial Series Characteristic Curves Output vs. Temperature 65W convection cooled at -20°C to 50°C operating ambient temperature. De-rate output power to 45.5W at 70°C. Output Power - Convection vs. Ambient Temperature 70 65 60 55 50 45 40 -20 -10 0 10 20 30 40 50 60 70 Ambient Operating Temperature (°C) Efficiency vs. Loading The charts below detail the TB65 efficiency vs input voltage and output loading conditions at 25°C, 50°C and 70°C under de-rated power. 25°C ambient 50°C Ambient 92% 92% 115V 12v 115V 12v 91% 91% 230V 12v 230V 12v 90% 90% 115V 15v 115V 15v 230V 15v 230V 15v 89% 89% 115V 24v 115V 24v 88% 88% 230V 24v 230V 24v 115V 48v 115V 48v 87% 87% 230V 48v 230V 48v 60% 80% 100% 60% 80% 100% Load (% of rated) Load (% of rated) 70°C Ambient 92% 115V 12v 91% 230V 12v 90% 115V 15v 230V 15v 89% 115V 24v 88% 230V 24v 115V 48v 87% 60% 80% 100% 230V 48v Load (% of rated) www.slpower.com TB65 REV 2.3 26-SEP-16 5 Efficiency Efficiency Output Power (Watts) Efficiency TB65 65W Single Output Test and Measurement/Industrial Series 2 Inrush Current, peak (I T rating) Measured at 264Vac, 50°C at 100% loading, 70°C at de-rated load condition 2 2 50°C - I T rating 70°C - I T rating 2 2 Model (A Seconds, Typical) (A Seconds, Typical) 12V Model 8.5 11.0 15V Model 6.5 13.2 24V Model 10.9 11.7 48V Model 10.4 11.1 Internal Temperature Sensor Conversion Table - Resistance Value across connector J3, pins 3-4 Internal Temperature 6,040K ohms -20℃ 3,227K ohms -10℃ 1,788K ohms 0℃ 1,025K ohms 10℃ 605.1K ohms 20℃ 367.6K ohms 30℃ 229.2K ohms 40℃ 146.4K ohms 50℃ 95.62K ohms 60℃ 63.80K ohms 70℃ 43.40K ohms 80℃ 30.07K ohms 90℃ 21.19K ohms 100℃ Notes: 1) Tolerances: -20℃ to 60℃: +/- 4°C; 70℃ to 80℃: +/- 5°C; 90℃ to 100℃: +/- 6°C. Data Sheet © 2016 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com TB65 REV 2.3 26-SEP-16 6