SL POWER TE10A0502C01

TE10 10W-12W Single Output External Power Test & Measurement/Industrial Series Features  Meets DoE Efficiency Level VI Requirements  No load input power  Average Efficiency  Up to 12W of AC-DC Power  Universal Input 90-264Vac Input Range  Desktop and Wall-Plug versions  Meets “Heavy Industrial” Levels of EN61000 EMC Requirements  Meets EN55022/CISPR22, FCC Part 15.109 Class B Conducted & Radiated Emissions, with 6db margin nd  Approved to EN/IEC/UL60950-1, 2 Ed., Am.2  E-cap life of >10 years  >1,000,000 Hours MTBF  3 Year Warranty LPS  IP22 Rated Enclosure Description A high performance AC to DC external power supply family designed for test & measurement and industrial applications. Fully compliant with Efficiency Level VI requirements per U.S. Dept. of Energy, and also compliant to the Heavy Industrial levels of various EN61000-4-x standards for EMC. The TE10A series models also meet Class B conducted and radiated EMI per FCC Part 15, EN55022, CISPR22. Designed to allow easy integration with test and measurement equipment and other industrial applications. Model Selection Model Output Output Ripple & Line Load Output Input Noise¹ Connector Configuration Number Volts Current Power Regulation Regulation TE10A0503F01 5.0V 2.0A 10W 75mV pk-pk ±1% ±5% TE10A0603F01 5.9V 1.6A 10W 75mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class I Desktop, TE10A0703F01 7.5V 1.3A 10W 75mV pk-pk ±1% ±5% Straight Barrel Type, IEC60320 C14 center positive Receptacle TE10A1203F01 12.0V 1.0A 12W 120mV pk-pk ±1% ±5% TE10A2403F01 24.0V 0.5A 12W 240mV pk-pk ±1% ±5% TE10A0503N01 5.0V 2.0A 10W 75mV pk-pk ±1% ±5% TE10A0603N01 5.9V 1.6A 10W 75mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class II Desktop, TE10A0703N01 7.5V 1.3A 10W 75mV pk-pk ±1% ±5% Straight Barrel Type, IEC60320 C8 center positive Receptacle TE10A1203N01 12.0V 1.0A 12W 120mV pk-pk ±1% ±5% TE10A2403N01 24.0V 0.5A 12W 240mV pk-pk ±1% ±5% TE10A0503Q01 5.0V 2.0A 10W 75mV pk-pk ±1% ±5% TE10A0603Q01 5.9V 1.6A 10W 75mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class II Desktop, TE10A0703Q01 7.5V 1.3A 10W 75mV pk-pk ±1% ±5% Straight Barrel Type, IEC60320 C18 center positive Receptacle TE10A1203Q01 12.0V 1.0A 12W 120mV pk-pk ±1% ±5% TE10A2403Q01 24.0V 0.5A 12W 240mV pk-pk ±1% ±5% TE10A0503B01 5.0V 2.0A 10W 75mV pk-pk ±1% ±5% Class II Wall-Plug, TE10A0603B01 5.9V 1.6A 10W 75mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Interchangeable Blades TE10A0703B01 7.5V 1.3A 10W 75mV pk-pk Straight Barrel Type, ±1% ±5% (North American Blade center positive TE10A1203B01 12.0V 1.0A 12W 120mV pk-pk ±1% ±5% included)² TE10A2403B01 24.0V 0.5A 12W 240mV pk-pk ±1% ±5% TE10A0503C01 5.0V 2.0A 10W 75mV pk-pk ±1% ±5% TE10A0603C01 5.9V 1.6A 10W 75mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class II Wall-Plug, Fixed TE10A0703C01 7.5V 1.3A 10W 75mV pk-pk ±1% ±5% Straight Barrel Type, North American Blades³ center positive TE10A1203C01 12.0V 1.0A 12W 120mV pk-pk ±1% ±5% TE10A2403C01 24.0V 0.5A 12W 240mV pk-pk ±1% ±5% Notes: 1. Measured at the output connector, with noise probe directly across output and load terminated with 0.1μF ceramic and 10μF low ESR capacitors. For 5V and 6V models, values listed are typical, 100mV pk-pk maximum with 0.1μF ceramic and 47μF low ESR capacitors used at measurement point. 2. Order blade kit KT-1027K for other blades (EU. UK, Australia) 3. For EU fixed blades, replace “C” in the model number with “M”, for UK blades, replace “C” with “G”, for Australia blades, replace “C” with “H”. 4. For Input Class I models: For AC GND connected to output common (-), insert a “B” in the part number where the “A” is located (TE10B0503F01). 5. All specifications are typical at nominal input, full load, at 25°C ambient unless noted. www.slpower.com TE10 Rev 2.5 2-MAY-16 1 TE10 10W-12W Single Output External Power Test & Measurement/Industrial Series General Specifications AC Input 100-240Vac, ±10%, 47-63Hz, 1∅ Turn On Time Less than 700mS @115Vac, full load Input Current 115Vac: 0.45A, 230Vac: 0.28A Hold-up Time 20mS min., at full Load, 100Vac input Overtemperature Will shutdown upon an overtemperature Inrush Current 264Vac, cold start: will not exceed 40A condition, auto-recovery. Protection F1, F2: 3.15A, 250Vac fuses (line & neutral Input Fuses Overload Protection 130 to 180% of rating, Hiccup Mode lines) provided on all models Earth Leakage Input-GND: <500μA@264Vac, 60Hz, NC Short Circuit Hiccup Mode, auto recovery. Output-GND: <4mA@264Vac, 60Hz, NC Current Protection Meets US DoE Efficiency Level VI Average Overvoltage Efficiency 130 to 150% of output voltage, hiccup mode efficiency levels Protection Input-Output: 4000Vac 10 to 12W continuous – See models chart for Output Power Isolation Input-Ground: 1500Vac specific voltage model ratings. Output-Ground: 1500Vac No Load Input <0.1W per DoE Efficiency Level VI Safety Standards EN/CSA/UL/IEC 60950-1, 2nd Edition, Am 2 Requirements Power -20°C to +70°C Operating Ripple and Noise See models chart on pg 1. Start Up at -40°C, full load, (warmup period before Temperature all parameters are within published specifications). Temperature See models chart on pg 1. See Derating Chart Output Voltage Derating 500µs response time for return to within 0.5% Transient of final value for any 50% load step over the Storage Temperature -40°C to +85°C Response range of 5% to 100% of rated load,∆i/∆t< 0.2A/µs. Max. voltage deviation is +/-3.5%. Operating: to 5000m. See models chart on pg 1. Regulation Altitude Non-operating: -500 to 40,000 ft. 1.4m from table top to wooden platform, 6 Drop Test Relative Humidity 5% to 95%, non-condensing faces. Operating: 0.003g/Hz, 1.5grms overall, 3 Operating: Half-sine, 20gpk, 10mS, 3 axes, axes, 10 min/axis, 1-500Hz. 6 shocks total Non-Oper.: random waveform, 3 minutes per Non-Operating: Half-sine waveform, impact Vibration axis, 3 axes and Sine waveform, Vib. Shock acceleration of 100G, Pulse duration of 6 frequency/acceleration: 10-500Hz/1g, sweep mS, Number of shocks: 3 for each of the rate of 1 octave / minutes, Vibration time of 10 three axis sweeps / axes, 3 axes >1,000,000 hours, full load, 110 & 220Vac Dimensions See outline drawings MTBF input, 25°C amb., per Telcordia 332 Issue 6, Stress Method. >10 year life based on calculations at 115Vac/60Hz & 230Vac/50Hz, ambient 25°C 110g Weight E-Cap Life at 24 hrs per day, 365 days/year, 6 power up cycles per day. All specifications are typical at nominal input, full load, at 25°C ambient unless noted. www.slpower.com TE10 Rev 2.5 2-MAY-16 2 TE10 10W-12W Single Output External Power Test & Measurement/Industrial Series EMI/EMC Compliance EN55022/CISPR22 Class B, FCC Part 15.107, Class B: 6db margin typ, at 115 and 230Vac Conducted Emissions: EN55022/CISPR22 Class B, FCC Part 15.109, Class B: 3db margin typ, at 115 and 230Vac Radiated Emissions: Common Mode Noise: High Frequency (100kHz-20MHz): <40mA pk-pk Electro-Static Discharge (ESD) EN55024/IEC61000-4-2, Level 4: +/- 8kV contact, +/- 15kV air, Criteria A Immunity on Power ports: Radiated RF EM Fields Susceptibility EN55022/EN61000-4-3, 10V/m, 80MHz-2.7GHz, 80% AM at 1kHz Electrical Fast Transients (EFT) /Bursts: EN55024/IEC61000-4-4, Level 4, +/- 4.4kV, 100Khz rep rate, 40A, Criteria A Surges, Line to Line (Diff Mode) and Line EN55024/IEC61000-4-5, Level 4, +/-2kV DM, +/-4kV CM, Criteria A to GND (CMN Mode) Conducted Disturbances induced by RF EN55022/IEC61000-4-6, 3.6V/m – Level 4, 0.15 to 80Mhz; and 12V/m) in ISM and amateur radio bands between 0.15Mhz and 80Mhz, 80% AM at 1KHz Fields EN55024/IEC1000-4-8, Level 4: 30 A/m, 50/60 Hz Rated Power frequency magnetic fields EN55024/IECEN61000-4-11: --100% dip for 20mS, Criteria A Voltage Interruptions, Dips, Sags & --100% dip for 5000mS (250/300 cycles), Criteria B Surges --60% dip for 100mS, Criteria B --30% dip for 500mS, Criteria A EN55011/EN61000-3-2, Class A Harmonic Current Emissions EN61000-3-3 Flicker Test All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Mechanical Drawing IEC60320 C14 Receptacle, 2.5 x 5.5 x 9.5mm Barrel Connector Interchangeable N.A. Blade, 2.5 x 5.5 x 9.5mm barrel connector Notes: 1. Weight: 110g. 2. All dimensions in mm. 3. Interchangeable blade models come with North American blade fitted. For other blades (EU, UK, Aust.) order blade kit KT1027K. 4. The unit should not be covered or enclosed to protect against excessive case temperature rise. www.slpower.com TE10 Rev 2.5 2-MAY-16 3 TE10 10W-12W Single Output External Power Test & Measurement/Industrial Series Connector Information Standard models include a 2.5 x 5.5 x 9.5mm straight barrel type connector (Ault #3), center positive. Other standard options are listed below. The “03” in the standard model number is replaced by the applicable digits below: Derating Chart: 14 12 10 8 5V 7V 6 12V 4 24V 2 0 -20 -10 0 10 20 30 40 50 60 70 Ambient Temperature ͦC www.slpower.com TE10 Rev 2.5 2-MAY-16 4 Watts TE10 10W-12W Single Output External Power Test & Measurement/Industrial Series Efficiency Level VI Information: TE10 Series, Output Voltage ≥6V TE10 Series, Output Voltage ≤5.9V Data Sheet © 2016 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com TE10 Rev 2.5 2-MAY-16 5