SL POWER TE120A2402F01

TE120 120W Single Output External Power Test & Measurement/Industrial Series Features  Meets DoE Efficiency Level VI Requirements  No load input power  Average Efficiency  Up to 120W of AC-DC Power  Universal Input 90-264Vac Input Range  IPX-2 Rated Enclosure for protection against liquid ingress  Meets “Heavy Industrial” Levels of EN61000 EMC Requirements  Meets EN55011/CISPR11, FCC Part 15.109 Class B Conducted & Radiated Emissions, with 6db margin nd  Approved to EN/IEC/UL60950-1, 2 Edition, Am. 2  E-cap life of >7 years  3 Year Warranty  RoHS/REACH Compliant Description A high performance AC to DC external power supply family designed for test & measurement and industrial applications. Fully compliant with Efficiency Level VI requirements per U.S. Dept. of Energy, and also compliant to the Heavy Industrial levels of various EN61000-4-x standards for EMC. The TE120 series models also meet Class B conducted and radiated EMI per FCC Part 15, EN55022, CISPR22. Designed to allow easy integration with test and measurement equipment and other industrial applications. Model Selection Output Cable Input Model Output Output Ripple & Line Load Number Volts Current Power Noise¹ Regulation Regulation & Connector Configuration TE120A1251F01 12.0V 10.0A 120W 120mV pk-pk ±1% ±5% 4 cond. #18AWG; 6 pin 2 Molex Type conn. Class I Desktop, TE120A1551F01 15.0V 8.00A 120W 150mV pk-pk ±1% ±5% IEC60320 C14 4 cond. #18AWG; 2.5 x 5.5 TE120A1803F01 18.0V 6.67A 120W 180mV pk-pk ±1% ±5% Receptacle x 9.5mm Straight Barrel TE120A2403F01 24.0V 5.00A 120W 240mV pk-pk ±1% ±5% Type conn., center positive TE120A1251N01 12.0V 10.0A 120W 120mV pk-pk ±1% ±5% 4 cond. #18AWG; 6 pin 2 Molex Type conn. Class II Desktop, TE120A1551N01 15.0V 8.00A 120W 150mV pk-pk ±1% ±5% IEC60320 C8 4 cond. #18AWG; 2.5 x 5.5 TE120A1803N01 18.0V 6.67A 120W 180mV pk-pk ±1% ±5% Receptacle x 9.5mm Straight Barrel TE120A2403N01 24.0V 5.00A 120W 240mV pk-pk ±1% ±5% Type conn., center positive TE120A1251Q01 12.0V 10.0A 120W 120mV pk-pk ±1% ±5% 4 cond. #18AWG; 6 pin 2 Molex Type conn. Class II Desktop, TE120A1551Q01 15.0V 8.00A 120W 150mV pk-pk ±1% ±5% IEC60320 C18 4 cond. #18AWG; 2.5 x 5.5 TE120A1803Q01 18.0V 6.67A 120W 180mV pk-pk ±1% ±5% Receptacle x 9.5mm Straight Barrel TE120A2403Q01 24.0V 5.00A 120W 240mV pk-pk ±1% ±5% Type conn., center positive Notes: 1. Measured at the output connector, with noise probe directly across output and load, terminated with 0.1μF ceramic and 47μF low ESR capacitors. 2. Molex p/n 39-01-2060 or equivalent. See outline drawing for pinout information. 3. For Input Class I models: For AC GND connected to output common (-), insert a “B” in the part number where the “A” is located (TE120B1251F01). 4. All specifications are typical at nominal input, full load, at 25C ambient unless noted. 5. Other connector options available, contact factory, or visit www.slpower.com. www.slpower.com TE120 Rev 1.3 14-DEC-17 1 TE120 120W Single Output External Power Test & Measurement/Industrial Series General Specifications AC Input 100-240Vac, ±10%, 47-63Hz, 1∅ Turn On Time Less than 1 sec @115Vac, full load. 100Vac: 1.5A, 230Vac: 0.7A 20mS min., at full Load, 100Vac input Input Current Hold-up Time Overtemperature Will shutdown upon an over-temperature Inrush Current 264Vac, cold start: will not exceed 40A peak Protection condition, auto-recovery. F1, F2: 3.15A, 250Vac fuses (line & neutral 130 to 180% of rating, Hiccup Mode Input Fuses Overload Protection lines) provided on all models Earth Leakage Input-GND: <500μA@264Vac, 60Hz, NC Short Circuit Hiccup Mode, auto recovery. Output-GND: <4mA@264Vac, 60Hz, NC Current Protection Overvoltage Meets US DoE Efficiency Level VI average 130 to 150% of output voltage (max. 60V on Efficiency efficiency levels 48V model), hiccup mode Protection Input-Output: 4000Vac 120W continuous – See models chart for Input-Ground: 1500Vac Output Power Isolation specific voltage model ratings. Output-Ground: 1500Vac No Load Input <0.210W per DoE Efficiency Level VI Safety Standards EN/CSA/UL/IEC 60950-1, 2nd Edition, Am 2 Power Requirements Operating See models chart on pg 1. -20°C to +50°C. Derate above 50 deg C. Ripple and Noise Temperature Case Temperatures are within regulatory guidelines. Power Supply unit should not be Output Voltage See models chart on pg 1. Case Temperature covered or enclosed to ensure proper heat dissipation. 500µs response time for return to within 0.5% Transient of final value for any 50% load step over the Temperature See Derating Curve. Response range of 5% to 100% of rated load,∆i/∆t< Derating 0.2A/µs. Max. voltage deviation is +/-3.5%. >7 year life based on calculations at 115Vac/60Hz & 230Vac/50Hz, ambient 25°C >250,000 hours, full load, 110 & 220Vac E-Cap Life MTBF at 24 hrs per day, 365 days/year, 6 power up input, 25°C amb., per Telcordia 332 Issue 6. cycles per day. (80% load on 12V model) Weight 710g Storage Temperature -40°C to +85°C Operating: to 5000m (derate to TBD temp. 1.4m from table top to wooden platform, 6 Safety Drop Test Altitude above 3000m). faces. Non-operating: -500 to 40,000 ft. W: 2.65” x L: 8.3” x H: 1.7” 5% to 95%, non-condensing Dimensions Relative Humidity W: 67.4mm x L: 212.4mm x H: 44.25mm Operating: 0.003g/Hz, 1.5grms overall, 3 Operating: Half-sine, 20gpk, 10mS, 3 axes, axes, 10 min/axis, 1-500Hz. 6 shocks total Non-Oper.: random waveform, 3 minutes per Non-Operating: Half-sine waveform, impact Vibration axis, 3 axes and Sine waveform, Vib. Shock acceleration of 50G, Pulse duration of 6 mS, frequency/acceleration: 10-500Hz/1g, sweep Number of shocks: 3 for each of the three rate of 1 octave / minutes, Vibration time of 10 axis sweeps / axes, 3 axes All specifications are typical at nominal input, full load, at 25C ambient unless noted. www.slpower.com TE120 Rev 1.3 14-DEC-17 2 TE120 120W Single Output External Power Test & Measurement/Industrial Series EMI/EMC Compliance EN55011/CISPR22 Class B, FCC Part 15.107, Class B: 6db margin typ, at 115 and 230Vac Conducted Emissions: EN55022/CISPR22 Class B, FCC Part 15.109, Class B: 3db margin typ, at 115 and 230Vac Radiated Emissions: Common Mode Noise: High Frequency (100kHz-20MHz): <40mA pk-pk Electro-Static Discharge (ESD) EN55024/IEC61000-4-2, Level 4: +/- 8kV contact, +/- 15kV air, Criteria A Immunity on Power ports: Radiated RF EM Fields Susceptibility EN55022/EN61000-4-3, 10V/m, 80MHz-2.7GHz, 80% AM at 1kHz Electrical Fast Transients (EFT) /Bursts: EN55024/IEC61000-4-4, Level 4, +/- 4.4kV, 100Khz rep rate, 40A, Criteria A Surges, Line to Line (Diff Mode) and Line EN55024/IEC61000-4-5, Level 4, +/-2kV DM, +/-4kV CM, Criteria A to GND (CMN Mode) Conducted Disturbances induced by RF EN55022/IEC61000-4-6, 10Vrms – Level 4, in ISM and amateur radio bands between 0.15Mhz and 80Mhz, 80% AM at 1KHz Fields EN55024/IEC1000-4-8, Level 4: 30 A/m, 50/60 Hz Rated Power frequency magnetic fields EN55024/IECEN61000-4-11: --100% dip for 20mS, Criteria A Voltage Interruptions, Dips, Sags & --100% dip for 5000mS (250/300 cycles), Criteria B Surges --60% dip for 100mS, Criteria B --30% dip for 500mS, Criteria A EN55011/EN61000-3-2, Class A Harmonic Current Emissions EN61000-3-3 Flicker Test Mechanical Drawing (12V, 15V Models: Output Connector: 6 pin Molex 39-01-2060 or equiv. Pins 1, 4 = (+), pins 3, 6 = (-), pins 2, 5 = NC www.slpower.com TE120 Rev 1.3 14-DEC-17 3 TE120 120W Single Output External Power Test & Measurement/Industrial Series Mechanical Drawing (18V, 24V models): Output Connector: 2.5 x 5.5 x 9.5mm straight barrel type, center positive. Notes: 1) All dimensions in mm. 2) Other connector options available. See below. 3) The unit should not be covered or enclosed to protect against excessive case temperature rise. Connector Information Standard models include a 2.5 x 5.5 x 9.5mm straight barrel type connector (Ault #3), center positive. (#51 for the 12V models). Other standard options are listed below. The “03” in the standard model number is replaced by the applicable digits below: www.slpower.com TE120 Rev 1.3 14-DEC-17 4 TE120 120W Single Output External Power Test & Measurement/Industrial Series Deratring Curve: TE120 Series Derating Curve All Models 140 120 100 80 60 40 20 0 -20° -10° 0° 10° 20° 30° 40° 50° 60° 70° Ambient Operating Temperature (°C) Efficiency Level VI Information: TE120 Series Data Sheet © 2017 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com TE120 Rev 1.3 14-DEC-17 5 Output Power (Watts)