SL POWER TE150A4851F01

TE150A4803F01 TE150A4803N01 TE150A4803Q01 150W Single Output TE150 External Power Supply FEATURES AND BENEFITS Audio Visual Renewable Compact size: 6.5” x 2.8” x 1.5” Meets EN55015/CISPR15, CISPR22, CISPR32, FCC Part 15.109 Class B Conducted & Automation ITE & Comms Meets DoE Efficiency Level VI and EU CoC Radiated Emissions, with 6db margin Version 5, Tier 2 Requirements No load input power, Average Efficiency Approved to EN/IEC/UL/CSA C22.2 No. Broadcast Lighting 60950-1, 2nd Edition, Am. 2 Up to 150W of AC-DC Power 3 Year Warranty Industrial Military COTS >10 years E-cap life RoHS/REACH Compliant Universal Input 90-264Vac Input Range Display Test & Blue LED Indicator & Signage Measurement IP22 Rated Enclosure MODEL SELECTION Output Output Ripple & Line Load Output Cable Input 4 Volts Model Number 1 Current Power Noise Regulation Regulation & Connector Configuration TE150A1251F01 12.0V 12.5A 150W 120mV pk-pk ±1% ±5% 6 pin Molex Type2 TE150A1551F01 15.0V 10.0A 150W 150mV pk-pk ±1% ±5% Class I Desktop, TE150A1851F01 18.0V 8.33A 150W 180mV pk-pk ±1% ±5% IEC60320 C14 Receptacle 2.5 x 5.5 x 9.5mm Str.Barrel TE150A2451F01 24.0V 6.25A 150W 240mV pk-pk ±1% ±5% Type, center (+) 48.0V 3.20A 150W 480mV pk-pk ±1% ±5% TE150A1251N01 12.0V 12.5A 150W 120mV pk-pk ±1% ±1% 6 pin Molex Type2 TE150A1551N01 15.0V 10.0A 150W 150mV pk-pk ±1% ±1% Class I Desktop, TE150A1851N01 18.0V 8.33A 150W 240mV pk-pk ±1% ±1% IEC60320 C8 Receptacle 2.5 x 5.5 x 9.5mm Str.Barrel TE150A2451N01 24.0V 6.25A 150W 480mV pk-pk ±1% ±1% Type, center (+) 48.0V 3.20A 150W 600mV pk-pk ±1% ±1% TE150A1251Q01 12.0V 12.5A 150W 120mV pk-pk ±1% ±1% 6 pin Molex Type2 TE150A1551Q01 15.0V 10.0A 150W 150mV pk-pk ±1% ±1% Class II Desktop, TE150A1851Q01 18.0V 8.33A 150W 180mV pk-pk ±1% ±1% IEC60320 C18 Receptacle 2.5 x 5.5 x 9.5mm Str.Barrel ±1% TE150A2451Q01 240mV pk-pk ±1% 24.0V 6.25A 150W Type, center (+) ±1% 48.0V 3.20A 150W 480mV pk-pk ±1% 1. Measured at the output connector, with noise probe directly across output and load, terminated with 0.1μF ceramic and 47μF low ESR capacitors. Notes : 2. Molex p/n 39-01-2060 or equivalent. See outline drawing for pinout information. 3. For Input Class I models: For AC GND connected to output common (-), insert a “B” in the part number where the “A” is located (TE120B1251F01). 4. All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Copyright © 2018 SL Power Electronics Corp. - All rights reserved. Page 1 TE150 Datasheet v0218 150W Single Output TE150 External Power Supply INPUT OUTPUT AC Input 100-240Vac, ±10%, 47-63Hz, 1Ø Output Voltage See models chart on pg 1. Input Current 115Vac: 1.6A, 230Vac: 0.8A 150W continuous – See models chart for specific Output Power voltage model ratings. Inrush Current 230Vac, cold start: will not exceed 70A pk Turn On Time Less than 1 sec @115Vac, full load F1, F2: 3.15A/250Vac fuses (line & neutral lines) Input Fuses Ripple and Noise See models chart on pg 1. provided on all models Input-GND: <500μA@264Vac, 60Hz, NC Output-GND: Hold-Up Time 20mS min., at full Load, 100Vac input Leakage Current <4mA@264Vac, 60Hz, NC Enclosure Leakage: TBDuA 500μs response time for return to within 0.5% of final Meets US DoE Efficiency Level VI, EU CoC Version 5, value for any 50% load step over the range of 5% to Efficiency Output Power 100% of rated load, ∆i/∆t<0.2A/μs. Max voltage Tier 2 average efficiency levels deviation is +/-3.5% of final value. No Load Input <0.150W surpassing DoE Efficiency Level VI and EU Notes : All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Power CoC Version 5, Tier 2 Requirements All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Notes : SAFETY EN/CSA/UL/IEC 60950-1, 2nd Edition, Am 2 Safety Standards CSA C22.2 No. 1.4m from table top to wooden platform, 5 Safety Drop Test faces (face with the output cord not needed.). EMI/EMC COMPLIANCE Notes : All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Conducted Emissions EN55015/CISPR15:2013 Class B, CISPR22 2006 Class B, CISPR32 Class B, FCC Part 15.107, Class B: 6db margin typ, at 115 and 230Vac Radiated Emissions EN55022/CISPR22 Class B, CISPR32 Class B, FCC Part 15.109, Class B: 3db margin typ, at 115 and 230Vac Common Mode Noise High Frequency (100kHz-20MHz): <40mA pk-pk - See test set up below Electro-Static Discharge (ESD) Immunity on Power EN55024/IEC61000-4-2, Level 4: +/- 8kV contact, +/- 15kV air, Criteria A ports Radiated RF EM Fields EN55022/EN61000-4-3, 10V/m, 80MHz-2.7GHz, 80% AM at 1kHz Susceptibility Electrical Fast EN55024/IEC61000-4-4, Level 4, +/- 4.4kV, 100Khz rep rate, 40A, Criteria A Transients (EFT) /Bursts Surges, Line to Line (Diff Mode) and Line to GND EN55024/IEC61000-4-5, Level 4, +/-2.2kV DM, +/-4.4kV CM, Criteria A (CMN Mode) Conducted Disturbances EN55022/IEC61000-4-6, 10Vrms – Level 4, in ISM and amateur radio bands between 0.15Mhz and 80Mhz, 80% AM at 1KHz induced by RF Fields Rated Power frequency EN55024/IEC1000-4-8, Level 4: 30 A/m, 50/60 Hz magnetic fields Voltage Interruptions, EN55024/IECEN61000-4-11: Dips, Sags & Surges --100% dip for 20mS, Criteria A --100% dip for 5000mS (250/300 cycles), Criteria B --60% dip for 100mS, Criteria B --30% dip for 500mS, Criteria A Harmonic Current EN55011/EN61000-3-2, Class A & C (at 100% load) Emissions Flicker Test EN61000-3-3 Notes : Above parameters will be tested to 20% margin at 10%, 50%, 100% load. Copyright © 2018 SL Power Electronics Corp. - All rights reserved. Page 2 TE150 Datasheet v0218 150W Single Output TE150 External Power Supply PROTECTION Overvoltage Protection 115 to 130% of output voltage (max. 60V on 48V model), latching, recycle AC power to recover Short Circuit Protection Hiccup Mode, auto recovery. Overtemperature Will shutdown upon an over-temperature condition, auto-recovery. Protection Overload Protection 130 to 180% of rating, Hiccup Mode Operating: Half-sine, 20gpk, 10mS, 3 axes, 6 shocks total Shock Non-Operating: Half-sine waveform, impact acceleration of 50G, Pulse duration of 6 mS, Number of shocks: 3 for each of the three axis RELIABILITY ISOLATION SPECIFICATIONS >250,000 hours, full load, 115 & 230Vac Input-Output 3000Vac MTBF 1 Input-Ground 1500Vac Isolation input, 25°C amb., Telcordia SR-332 Issue 3. Output-Ground 500Vac >10 year life based on calculations at Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC 115Vac/60Hz & 230Vac/50Hz, ambient 25°C E-Cap Life at 24 hrs per day, 365 days/year, 6 power up Notes : All specifications are typical at nominal input, full load, at 25°C ambient unless noted. cycles per day. (80% load on 12V models) ENVIRONMENT Operating Temperature -20°C to +70°C. Derate above 50°C. Ripple & Noise = 2% from -20°C to 0°C Temperature Derating Derate output power above 40°C to TBD at 50°C Operating: 0.003g/Hz, 1.5grms overall, 3 axes, 10 min/axis, 1-500Hz. Non-Oper.: random waveform, 3 minutes per Vibration axis, 3 axes and Sine waveform, Vib. frequency/acceleration: 10-500Hz/1g, sweep rate of 1 octave / minutes, Vibration time of 10 sweeps / axes, 3 axes Case Temperatures are within regulatory guidelines. Care should be taken to avoid prolonged contact with skin or other heat Case Temperature sensitive surfaces. Relative Humidity 5% to 95%, non-condensing Storage Temperature and Humidity -40°C to +85°C Weight 700g Dimensions 165mmX37mmX72mm Case MECHANICAL DRAWING Copyright © 2018 SL Power Electronics Corp. - All rights reserved. Page 3 TE150 Datasheet v0218 150W Single Output TE150 External Power Supply CONNECTOR INFORMATION Standard 48V models include a 2.5 x 5.5 x 9.5mm straight barrel type connector (Ault #3), center positive. (#51 for the 12V thru 24V models). Other standard options are listed below. The “03” or “51” in the standard model number is replaced by the applicable digits below : Connector Description Connector Description No. No. 2.0 x 5.5 x 9.5 mm straight barrel plug - 2.0 x 5.5 x 9.5 mm straight barrel plug, 02 44 Center positive locking - Center positive 2.5 x 5.5 x 9.5 mm straight barrel plug - 2.5 x 5.5 x 9.5 mm straight barrel plug, 03 45 Center positive (Standard models) locking - Center positive 5 pin DIN-180 male connector (Pins 3,5 = (+), 3 pin snap n lock, kycon kpp-3P or equivalent 12 48 pins 1,2,4=(-)) (pin 1=(+), pin 6 pin DIN male connector (Pins 1,2 = (+), 4 pin snap n lock, kycon kpp-4P or equivalent 22 49 pins 4,5=(-)) (pin 1,3=(+), pin 8 pin DIN male connector (Pins 3,7 = (+), 2.0x 5.5 x11 mm right angle barrel plug 23 70 pins 1,4,6,8=(-), shell=FG) (High retention) - Center positive 9 pin “D” type, female (Pins 8 = (+), pins 5=(-), 6 pin Minifit-Molex 39-01-2060 or equivalent 32 51 all others=NC) (pin 1,4=(+), pin 2.5 x 5.5 x 12.5 mm straight barrel plug- 2.5x 5.5 x11 mm right angle barrel plug 33 71 Center positive (High retention) - Center positive 2.0 x 5.5 x 9.5 mm right angle barrel plug 40 65 Stripped and Tinned Leads (High retention) - Center positive 2.5 x 5.5 x 9.5 mm right angle barrel plug 2.0x 5.5 x9.5 mm straight barrel plug 41 72 (High retention) - Center positive (High retention, no spark ) - Center positive 2.0 x 5.5 x 11 mm straight barrel plug 2.5x 5.5 x9.5 mm straight barrel plug 42 73 (High retention) - Center positive (High retention, no spark ) - Center positive 2.5 x 5.5 x 11 mm straight barrel plug 43 74 EIAJ#5 style connector - Central Positive (High retention) - Center positive Notes : XLR type connectors also are available, consult factory for details. Copyright © 2018 SL Power Electronics Corp. - All rights reserved. Page 4 TE150 Datasheet v0218 150W Single Output TE150 External Power Supply EFFICIENCY LEVEL VI INFORMATION: Single-Voltage Extrenal AC-DC Power Supply, Basic-Voltage Minimum Average Nameplate Output Power Maximum Power in Efficiency in Active Mode ( Pout ) No-Load Mode [W] ( expressed as a decimal) P out ≤ 1 W ≥ 0.5 x P out + 0.16 ≤ 0.100 ≥ 0.071 x In( P out ) --- 0.0014 1 W < P out ≤ 49 W ≤ 0.100 x P out + 0.67 49 W < P out ≤ 250 W ≥ 0.880 ≤ 0.210 TE150 Series P out > 250 W ≥ 0.875 ≤ 0.500 Single-Voltage Extrenal AC-DC Power Supply, Low-Voltage Minimum Average Nameplate Output Power Maximum Power in Efficiency in Active Mode ( Pout ) No-Load Mode [W] ( expressed as a decimal) P out ≤ 1 W ≥ 0.517 x P out + 0.087 ≤ 0.100 ≥ 0.0834 x In( P out ) --- 0.0014 1 W < P out ≤ 49 W ≤ 0.100 x P out + 0.609 49 W < P out ≤ 250 W ≥ 0.870 ≤ 0.210 P out > 250 W ≥ 0.875 ≤ 0.500 In addition, TE150 Series will meet the EU Code of Conduct,Version 5,, Tier 2requirements. (<0.150W no load input power) Copyright © 2018 SL Power Electronics Corp. - All rights reserved. Page 5 TE150 Datasheet v0218