SL POWER TE20A1202F01

TE20 15W-20W Single Output External Power Test & Measurement/Industrial Series Features  Meets DoE Efficiency Level VI Requirements  No load input power  Average Efficiency  Up to 20W of AC-DC Power  Universal Input 90-264Vac Input Range  Desktop and Wall-Plug versions  Meets “Heavy Industrial” Levels of EN61000 EMC Requirements  Meets EN55022/CISPR22, and FCC Part 15.109 Class B Conducted & Radiated Emissions, with 6db margin nd  Approved to EN/IEC/UL60950-1, 2 Ed., Am. 2  E-cap life of >10 years  >1,000,000 Hours MTBF  3 Year Warranty LPS  IP22 Rated Enclosure Description A high performance AC to DC external power supply family designed for test & measurement and industrial applications. The TE20A Series models are compliant with Efficiency Level VI requirements per U.S. Dept. of Energy, as well as the Heavy Industrial levels of various EN61000-4-x standards for EMC. The TE20A series models also meet Class B conducted and radiated emissions per FCC Part 15, EN55022, and CISPR22. These superior performance external power supplies are designed to allow easy integration with test and measurement equipment and other industrial applications. Model Selection Model Output Output Ripple & Line Load Output Input Number Volts Current Power Noise¹ Regulation Regulation Connector Configuration TE20A0503F01 5.0V 3.00A 15W 75mV pk-pk ±1% ±5% TE20A0603F01 5.9V 2.50A 15W 75mV pk-pk ±1% ±5% TE20A0703F01 7.5V 2.00A 15W 75mV pk-pk ±1% ±5% TE20A0903F01 9.0V 2.00A 18W 90mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class I Desktop, TE20A1203F01 12.0V 1.50A 18W 120mV pk-pk ±1% ±5% Straight Barrel Type, IEC60320 C14 center positive Receptacle TE20A1503F01 15.0V 1.20A 18W 150mV pk-pk ±1% ±5% TE20A1803F01 18.0V 1.10A 20W 180mV pk-pk ±1% ±5% TE20A2403F01 24.0V 0.83A 20W 240mV pk-pk ±1% ±5% TE20A4803F01 48.0V 0.42A 20W 480mV pk-pk ±1% ±5% TE20A0503N01 5.0V 3.00A 15W 75mV pk-pk ±1% ±5% TE20A0603N01 5.9V 2.50A 15W 75mV pk-pk ±1% ±5% TE20A0703N01 7.5V 2.00A 15W 75mV pk-pk ±1% ±5% TE20A0903N01 9.0V 2.00A 18W 90mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class II Desktop, TE20A1203N01 12.0V 1.50A 18W 120mV pk-pk Straight Barrel Type, IEC60320 C8 ±1% ±5% center positive Receptacle TE20A1503N01 15.0V 1.20A 18W 150mV pk-pk ±1% ±5% TE20A1803N01 18.0V 1.10A 20W 180mV pk-pk ±1% ±5% TE20A2403N01 24.0V 0.83A 20W 240mV pk-pk ±1% ±5% TE20A4803N01 48.0V 0.42A 20W 480mV pk-pk ±1% ±5% TE20A0503Q01 5.0V 3.00A 15W 75mV pk-pk ±1% ±5% TE20A0603Q01 5.9V 2.50A 15W 75mV pk-pk ±1% ±5% TE20A0703Q01 7.5V 2.00A 15W 75mV pk-pk ±1% ±5% TE20A0903Q01 9.0V 2.00A 18W 90mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class II Desktop, TE20A1203Q01 12.0V 1.50A 18W 120mV pk-pk ±1% ±5% Straight Barrel Type, IEC60320 C18 center positive Receptacle TE20A1803Q01 18.0V 1.10A 20W 180mV pk-pk ±1% ±5% TE20A1503Q01 15.0V 1.20A 18W 150mV pk-pk ±1% ±5% TE20A2403Q01 24.0V 0.83A 20W 240mV pk-pk ±1% ±5% TE20A4803Q01 48.0V 0.42A 20W 480mV pk-pk ±1% ±5% www.slpower.com TE20 Rev 2.8 28-FEB-17 1 TE20 15W-20W Single Output External Power Test & Measurement/Industrial Series Model Selection (continued) TE20A0503B01 5.0V 3.00A 15W 75mV pk-pk ±1% ±5% TE20A0603B01 5.9V 2.50A 15W 75mV pk-pk ±1% ±5% TE20A0703B01 7.5V 2.00A 15W 75mV pk-pk ±1% ±5% Class II Wall-Plug, TE20A0903B01 9.0V 2.00A 18W 90mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Interchangeable TE20A1203B01 12.0V 1.50A 18W 120mV pk-pk Straight Barrel Type, ±1% ±5% Blades (North American center positive TE20A1503B01 15.0V 1.20A 18W 150mV pk-pk ±1% ±5% Blade included)² TE20A1803B01 18.0V 1.10A 20W 180mV pk-pk ±1% ±5% TE20A2403B01 24.0V 0.83A 20W 240mV pk-pk ±1% ±5% TE20A4803B01 48.0V 0.42A 20W 480mV pk-pk ±1% ±5% TE20A0503C01 5.0V 3.00A 15W 75mV pk-pk ±1% ±5% TE20A0603C01 5.9V 2.50A 15W 75mV pk-pk ±1% ±5% TE20A0703C01 7.5V 2.00A 15W 75mV pk-pk ±1% ±5% TE20A0903C01 9.0V 2.00A 18W 90mV pk-pk ±1% ±5% 2.5 x 5.5 x 9.5mm Class II Wall-Plug, TE20A1203C01 12.0V 1.50A 18W 120mV pk-pk ±1% ±5% Straight Barrel Type, Fixed North American center positive Blades TE20A1503C01 15.0V 1.20A 18W 150mV pk-pk ±1% ±5% TE20A2403C01 24.0V 0.83A 20W 240mV pk-pk ±1% ±5% TE20A2403C01 24.0V 0.83A 20W 240mV pk-pk ±1% ±5% TE20A4803C01 48.0V 0.42A 20W 480mV pk-pk ±1% ±5% Notes: 1. Measured at the output connector, with noise probe directly across output and load terminated with 0.1μF ceramic and 10μF low ESR capacitors. For 5V and 6V models, values listed are typical, 100mV pk-pk maximum with 0.1μF ceramic and 47μF low ESR capacitors used at measurement point. 2. Order blade kit KT-1027K for other blades (EU. UK, Australia) 3. For EU fixed blades, replace “C” in the model number with “M”, for UK blades, replace “C” with “G”, for Australia blades, replace “C” with “H”. 4. For Input Class I models: For AC GND connected to output common (-), insert a “B” in the part number where the “A” is located (TE20B0503F01). 5. All specifications are typical at nominal input, full load, at 25°C ambient unless noted. General Specifications AC Input 100-240Vac, ±10%, 47-63Hz, 1∅ Turn On Time Less than 700mS @115Vac, full load Input Current 115Vac: 0.5A, 230Vac: 0.25A Hold-up Time 20mS min., at full Load, 100Vac input Overtemperature Will shutdown upon an overtemperature Inrush Current 264Vac, cold start: will not exceed 40A condition, auto-recovery. Protection F1, F2: 3.15A, 250Vac fuses (line & neutral 130 to 180% of rating, Hiccup Mode Input Fuses Overload Protection lines) provided on all models Earth Leakage Input-GND: <500μA@264Vac, 60Hz, NC Short Circuit Hiccup Mode, auto recovery. Output-GND: <4mA@264Vac, 60Hz, NC Current Protection Overvoltage Meets US DoE Efficiency Level VI Average Efficiency 130 to 150% of output voltage, hiccup mode efficiency levels Protection Input-Output: 4000Vac 15 to 20W continuous – See models chart for Input-Ground: 1500Vac Output Power Isolation specific voltage model ratings. Output-Ground: 1500Vac No Load Input <0.1W per DoE Efficiency Level VI Safety Standards EN/CSA/UL/IEC 60950-1, 2nd Edition, Am 2 Requirements Power -20°C to +70°C Operating See models chart on pg 1. Ripple and Noise Start Up at -40°C, full load, (warmup period before Temperature all parameters are within published specifications). Temperature Output Voltage See models chart on pg 1. See Derating Chart Derating 500µs response time, return to within 0.5% of Transient final value for any 50% load step over 5% to Storage Temperature -40°C to +85°C Response 100% of rated load,∆i/∆t< 0.2A/µs. Max. voltage deviation is +/-3.5%. Operating: to 5000m. Regulation See models chart on pg 1. Altitude Non-operating: -500 to 40,000 ft. 1.4m from table top to wooden platform, 6 Drop Test Relative Humidity 5% to 95%, non-condensing faces. www.slpower.com TE20 Rev 2.8 28-FEB-17 2 TE20 15W-20W Single Output External Power Test & Measurement/Industrial Series General Specifications (continued) Operating: 0.003g/Hz, 1.5grms overall, 3 Operating: Half-sine, 20gpk, 10mS, 3 axes, axes, 10 min/axis, 1-500Hz. Non-Oper.: 6 shocks total random waveform, 3 minutes per axis, 3 axes; Non-Operating: Half-sine waveform, impact Vibration Shock Sine waveform, Vib. frequency/ acceleration: acceleration of 100G, Pulse duration of 6 10-500Hz/1g, sweep rate of 1 octave/min., mS, Number of shocks: 3 for each of the Vibration time of 10 sweeps / axes, 3 axes three axis >10 year life, based on calculations at >1,000,000 hours, full load, 110 & 220Vac 115Vac/60Hz & 230Vac/50Hz, 25°C at 24 hrs E-Cap Life MTBF input, 25°C amb., per Telcordia 332 Issue 6, per day, 365 days/year, 6 power up cycles per Stress Method. day. (@80% load for the 12V model) All specifications are typical at nominal input, full load, at 25°C ambient unless noted. EMI/EMC Compliance Conducted Emissions: EN55011/CISPR22 Class B, FCC Part 15.107, Class B: 6db margin typ, at 115 and 230Vac Radiated Emissions: EN55022/CISPR22 Class B, FCC Part 15.109, Class B: 3db margin typ, at 115 and 230Vac Common Mode Noise: High Frequency (100kHz-20MHz): <40mA pk-pk Electro-Static Discharge (ESD) EN55024/IEC61000-4-2, Level 4: +/- 8kV contact, +/- 15kV air, Criteria A Immunity on Power ports: EN55022/EN61000-4-3, 10V/m, 80MHz-2.7GHz, 80% AM at 1kHz Radiated RF EM Fields Susceptibility Electrical Fast Transients (EFT) /Bursts: EN55024/IEC61000-4-4, Level 4, +/- 4.4kV, 100Khz rep rate, 40A, Criteria A Surges, Line to Line (Diff Mode) and Line EN55024/IEC61000-4-5, Level 4, +/-2kV DM, +/-4kV CM, Criteria A to GND (CMN Mode) Conducted Disturbances induced by RF EN55022/IEC61000-4-6, 3V/m – Level 4, 0.15 to 80Mhz; and 12V/m) in ISM and amateur radio bands between 0.15Mhz and 80Mhz, 80% AM at 1KHz Fields Rated Power frequency magnetic fields EN55024/IEC1000-4-8, Level 4: 30A/m, 50/60 Hz EN55024/IECEN61000-4-11: --100% dip for 20mS, Criteria A Voltage Interruptions, Dips, Sags & --100% dip for 5000mS (250/300 cycles), Criteria B Surges --60% dip for 100mS, Criteria B --30% dip for 500mS, Criteria A Harmonic Current Emissions EN55011/EN61000-3-2, Class A Flicker Test EN61000-3-3 All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Mechanical Drawing Notes: 1. Weight: 110g. 2. All dimensions in mm. 3. Interchangeable blade models come with North American blade fitted. For other blades (EU, UK, Aust.) order blade kit KT1027K. 4. The unit should not be covered or enclosed to protect against excessive case temperature rise. IEC60320 C14 Receptacle, 2.5 x 5.5 x 9.5mm Barrel Connector Interchangeable N.A. Blade, 2.5 x 5.5 x 9.5mm barrel connector www.slpower.com TE20 Rev 2.8 28-FEB-17 3 TE20 15W-20W Single Output External Power Test & Measurement/Industrial Series Derating Chart: 25 20 15 5V 12V-18V 10 24V 48V 5 0 -20 -10 0 10 20 30 40 50 60 70 Ambient Temperature ͦC Connector Information Standard models include a 2.5 x 5.5 x 9.5mm straight barrel type connector (Ault #3), center positive. Other standard options are listed below. The “03” in the standard model number is replaced by the applicable digits below: www.slpower.com TE20 Rev 2.8 28-FEB-17 4 Watts TE20 15W-20W Single Output External Power Test & Measurement/Industrial Series Efficiency Level VI Information: TE20A Series Data Sheet © 2017 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. www.slpower.com TE20 Rev 2.8 28-FEB-17 5