Manufacturers
SWITCHCRAFT S10K
Description
Conn Power PL 2 POS ST Cable Mount 1 Port
Part Number
S10K
Price
Request Quote
Manufacturer
SWITCHCRAFT
Lead Time
Request Quote
Category
Connectors » Connector Power
Specifications
Manufacturer
Switchcraft
Manufacturers Part #
S10K
Industry Aliases
S10K
Sub-Category
Power Connectors
Factory Pack Quantity
100
Datasheet
Extracted Text
HIGH AMPERAGE, SEALED/NON-SEALED, LOCKING/ NON-LOCKING POWER JACKS & PLUGS NEW PRODUCT BULLETIN 599 5555 N Elston Ave | Chicago, IL 60630 | P: 773.792.2700 | F: 773.792.2129 | www.switchcraft.com | Made in USA. HIGH AMPERAGE, SEALED/NON-SEALED, LOCKING/ NON-LOCKING POWER JACKS & PLUGS NEW PRODUCT BULLETIN 599 FEATURES & BENEFITS APPLICATIONS • Up to 11A current rating (carry), 24 V DC • Any sealed data transmission • Military or industrial GPS location devices • -40ºC to 105º C operating temperature • Instrumentation • Locking/Non-Locking versions available • Medical equipment • Automatic switch over from AC to DC • Marine Applications permitted by sleeve shunt spring • Transportation • Available in sealed & non-sealed versions • General industrial electronic applications • Sealed versions sealed to IP68, NEMA 250 (6P) (when mated) • Power supplies Please visit switchcraft.com for the most up-to-date product specifications. Made in USA. HIGH AMPERAGE, SEALED/NON-SEALED, LOCKING/ NON-LOCKING POWER JACKS & PLUGS NEW PRODUCT BULLETIN 599 SPEcificationS Mechanical Specifications Life: 5000 cycles minimum Vibration: Mil-Std 202G Method 201A (Locking Only) Operating Forces: 5 lb maximum insertion. 0.5 lb minimum withdrawal Panel Mounting Torque: 8-10 in-lb Electrical Specifications Voltage Rating: 24 V AC/DC Current Rating: Refer to current rating table Insulation Resistance: 1000MΩ min Contact Resistance (initial): 15 mΩ max Environmental Specifications Operating Temperature Rating: -40 °C to +105 °C(-40ºF to +221°F) Moisture Resistance MIL-STD 202G Method 106G (Sealed Only) Insulation Resistance MIL-STD 202G Method 302 Condition B Thermal Shock: MIL-STD 202G Method 107G Salt Atmosphere (Corrosion): MIL-STD 202G Method 101E Condition B (Sealed Only) Weathertight Ratings: IP66, IP67, IP68, NEMA 250 (6p) when mated (Sealed Only) Material Specifications - Jacks Housing, Cover (insulators): Thermoplastic, Black Mounting Bushing, Hex Nut: Copper Alloy, Nickel Plated Flat Washer: Steel, Nickel Plated O-Ring: Elastomer, Black Center Pin: Copper Alloy, Nickel Plated Center Pin Terminal & Shunt Terminals: Copper Alloy, Silver or Matte Tin Plated Sleeve Spring Terminal: Spring Copper Alloy, Silver or Matte Tin Plated Material Specifications - Plugs Plug Barrel (Sleeve): Copper Alloy, Nickel Plated Coupling Ring: Copper Alloy, Nickel Plated Metal Handle: Copper Alloy, Nickel Plated Rubber Seal Handle: Black Elastomer over Metal Handle O-Ring: Elastomer, Black Center Contact (Tip): Copper Alloy, Silver Plated Tip & Sleeve Terminals: Copper Alloy, Tin Plated Tip Insulator: Thermoplastic, Blue Terminal Insulator: Epoxy Glass FR4 Tubular Insulator: Mylar Please visit switchcraft.com for the most up-to-date product specifications. Made in USA. HIGH AMPERAGE, SEALED/NON-SEALED, LOCKING/ NON-LOCKING POWER JACKS & PLUGS NEW PRODUCT BULLETIN 599 Pc-Mount high aMErPagE PowEr JackS PC-mount High Amperage Power Jacks 0.95 24.2 SEAL O-RING NOT ALWAYS SUPPLIED (SEE TABLE) 0.125 3.18 MAXIMUM 0.37 9.5 PANEL THICKNESS FLAT WASHED ACROSS FLATS HEX NUT 0.47 11.9 0.35 9 0.08 2 5/16-32 THREAD 0.055 1.4 CENTER PIN MTG. BUSHING 5/16-32 UNFE 2A THREAD SLEEVE 0.43 11 TERMINAL 0.43 11 0.26 6.5 0.063 1.60 (3X) 0.25 6.4 0.06 1.6 SHUNT TERMINAL 0.14 3.4 CENTER PIN 0.054 1.36 TERMINAL 0.020 0.51 0.19 4.9 0.020 0.51 0.062 1.57 0.12 3 0.008 0.20 0.020 0.51 0.10 2.5 0.10 2.5 0.19 4.8 0.325 8.26 0.248 6.29 0.349 8.87 A CENTER PIN SHUNT SLEEVE SCHEMATIC PCB LOCATING POST SHUNT NOT ALWAYS PRESENT TERMINAL (SEE TABLE) CENTER PIN SLEEVE SPRING TERMINAL TERMINAL 0.177 4.50 0.177 4.50 A A 0.248 6.29 0.248 6.29 0.120 3.05 0.040 1.02 0.140 3.56 0.140 3.56 0.189 4.80 0.189 4.80 0.120 3.05 0.030 0.76 0.030 0.76 0.120 3.05 0.070 [1.78] MIN FOR CLEARANCE FIT 0.067 [1.70] MAX FOR INTERFERENCE FIT 0.070 [1.78] MIN FOR CLEARANCE FIT REQUIRED ONLY FOR JACKS WITH POST 0.349 8.87 0.349 8.87 0.067 [1.70] MAX FOR INTERFERENCE FIT REQUIRED ONLY FOR JACKS WITH POST 0.120 3.05 0.478 12.14 0.478 12.14 RECOMMENDED PCB LAYOUT ALTERNATE PCB LAYOUT (COMPONENT SIDE) (COMPONENT SIDE) Please visit switchcraft.com for the most up-to-date product specifications. Made in USA. JACK MOUNTING SURFACE JACK MOUNTING SURFACE HIGH AMPERAGE, SEALED/NON-SEALED, LOCKING/ NON-LOCKING POWER JACKS & PLUGS NEW PRODUCT BULLETIN 599 SMt-Mount high aMErPagE PowEr JackS SMT-mount High Amperage Power Jacks 0.95 24.2 SEAL O-RING 0.125 3.18 MAXIMUM NOT ALWAYS SUPPLIED PANEL THICKNESS (SEE TABLE) 0.37 9.5 FLAT WASHED 0.055 1.4 ACROSS FLATS HEX NUT 0.35 9 0.08 2 0.47 11.9 5/16-32 THREAD CENTER PIN 0.10 2.5 5/16-32 UNFE 2A THREAD 0.25 6.4 0.43 11 0.43 11 0.26 6.5 SLEEVE CENTER PIN SHUNT TERMINAL TERMINAL 0.06 1.6 TERMINAL 0.07 1.7 0.08 2 0.054 1.36 0.062 1.57 0.19 4.9 0.60 15.2 A 0.325 8.26 SHUNT TERMINAL 1.05 26.7 REF 0.180 4.57 (2X) PCB LOCATING POST SLEEVE SHUNT NOT ALWAYS PRESENT CENTER PIN TERMINAL TERMINAL (SEE TABLE) TERMINAL SLEEVE SPRING TERMINAL 0.03 0.9 CENTER PIN 0.07 1.7 TERMINAL 0.148 3.76 0.360 9.14 CENTER PIN SHUNT 0.150 3.81 SLEEVE A 0.160 4.06 SCHEMATIC 0.030 0.76 0.283 7.19 0.130 3.30 0.240 6.10 0.250 6.35 (2X) 0.130 3.30 0.070 [1.78] MIN FOR CLEARANCE FIT 0.067 [1.70] MAX FOR INTERFERENCE FIT 0.321 8.15 REQUIRED ONLY FOR JACKS WITH POST RECOMMENDED PCB LAYOUT (COMPONENT SIDE) Please visit switchcraft.com for the most up-to-date product specifications. Made in USA. JACK MOUNTING SURFACE HIGH AMPERAGE, SEALED/NON-SEALED, LOCKING/ NON-LOCKING POWER JACKS & PLUGS NEW PRODUCT BULLETIN 599 hybrid-Mount high aMErPagE PowEr JackS Hybrid-mount High Amperage Power Jacks 0.95 24.2 SEAL O-RING 0.125 3.18 MAXIMUM NOT ALWAYS SUPPLIED PANEL THICKNESS (SEE TABLE) 0.37 9.5 0.35 9 FLAT WASHED 0.055 1.4 ACROSS FLATS 0.07 1.7 HEX NUT 0.47 11.9 0.180 4.57 0.08 2 5/16-32 THREAD 0.03 0.6 (2X) CENTER PIN 5/16-32 UNFE 2A THREAD 0.10 2.5 0.25 6.4 0.43 11 0.43 11 SLEEVE TERMINAL 0.26 6.5 SLEEVE TERMINAL 0.06 1.6 SHUNT TERMINAL CENTER PIN 0.14 3.4 TYP TERMINAL 0.054 1.36 0.08 2 0.07 1.7 0.19 4.9 0.062 1.57 0.030 0.76 0.008 0.20 0.020 0.51 0.020 0.51 0.020 0.51 0.04 1.1 0.10 2.5 A 0.10 2.5 0.60 15.2 0.19 4.8 0.325 8.26 0.248 6.29 0.349 8.87 CENTER PIN SHUNT SLEEVE SCHEMATIC SHUNT PCB LOCATING POST TERMINAL NOT ALWAYS PRESENT (SEE TABLE) CENTER PIN SLEEVE SPRING TERMINAL TERMINAL 0.177 4.50 0.248 6.30 0.177 4.50 0.248 6.30 0.120 3.05 0.040 1.02 0.150 3.81 0.150 3.81 0.030 0.76 0.258 6.55 0.258 6.55 0.050 1.27 0.120 3.05 A A 0.160 4.06 0.160 4.06 0.050 1.27 0.025 0.64 0.025 0.64 0.044 1.12 0.044 1.12 0.189 4.80 0.189 4.80 0.130 3.30 0.130 3.30 0.030 0.76 0.120 3.05 0.070 [1.78] MIN FOR CLEARANCE FIT 0.070 [1.78] MIN FOR CLEARANCE FIT 0.067 [1.70] MAX FOR INTERFERENCE FIT 0.067 [1.70] MAX FOR INTERFERENCE FIT REQUIRED ONLY FOR JACKS WITH POST 0.265 6.73 0.265 6.73 REQUIRED ONLY FOR JACKS WITH POST 0.120 3.05 0.130 3.30 0.130 3.30 0.157 3.99 0.157 3.99 0.250 6.35 0.250 6.35 (2X) (2X) 0.349 8.87 0.349 8.86 RECOMMENDED PCB LAYOUT RECOMMENDED PCB LAYOUT 0.478 12.14 (COMPONENT SIDE) (COMPONENT SIDE) 0.478 12.14 Please visit switchcraft.com for the most up-to-date product specifications. Made in USA. JACK MOUNTING SURFACE JACK MOUNTING SURFACE HIGH AMPERAGE, SEALED/NON-SEALED, LOCKING/ NON-LOCKING POWER JACKS & PLUGS NEW PRODUCT BULLETIN 599 LOCKING and SEALING PLUGS S10KS12, S10KS15, S10KS17 LOCKING, NON-SEALING PLUG S10K NON-LOCKING, NON-SEALING PLUGS S1012, S1015, S1017 NON-LOCKING, NON-SEALING PLUG S10 Please visit switchcraft.com for the most up-to-date product specifications. Made in USA. HIGH AMPERAGE, SEALED/NON-SEALED, LOCKING/ NON-LOCKING POWER JACKS & PLUGS NEW PRODUCT BULLETIN 599 currEnt rating tablE Jack Terminal Wire Current Rating (A) at Operating Temperature (ºC ) Plating (awg) 55ºC max 65ºC max 75ºC max 85ºC max 95ºC max 105ºC max 16 11 10 9.5 9 7.5 6 Silver 18 9.5 9 8 7 5.5 5 20 9 8 6.5 6 5 4 16 11 10 9 8 7 5.5 Tin 18 9.5 9 8 7 5.5 5 20 8.5 8 6.5 5.5 5 4 High Amperage Power Plug Ordering Code: Note: DC Power Plugs & Jacks are for current carry only. Switching Power Jack on-off under resistive load is not recommended. The circuitry on-off switch should be off before connecting or disconnecting the Power Plug to Jack. For electrical life limitations under resis- S 1 0 tive load, consult factory. High Amperage Power Plug Ordering Code: high aMPEragE PowEr Plug ordEring codE: S10 Series Handle options: 12 - rubber over metal sealing handle for Locking option: cable O.D. 0.125 - 0.150" [3.2 - 3.8mm] K - LockingS 1 0 15 - rubber over metal sealing handle for blank - non-locking cable O.D. 0.150 - 0.175" [3.8 - 4.4mm] 17 - rubber over metal sealing handle for Seal option: S10 Series cable O.D. 0.175 - 0.210" [4.4 - 5.3mm] Handle options: S - Sealed blank - metal, non-sealing handle for 12 - rubber over metal sealing handle for blank - non-sealed Locking option: cable O.D. up to 0.218" [5.5mm] cable O.D. 0.125 - 0.150" [3.2 - 3.8mm] K - Locking 15 - rubber over metal sealing handle for blank - non-locking cable O.D. 0.150 - 0.175" [3.8 - 4.4mm] 17 - rubber over metal sealing handle for Seal option: cable O.D. 0.175 - 0.210" [4.4 - 5.3mm] S - Sealed blank - metal, non-sealing handle for blank - non-sealed cable O.D. up to 0.218" [5.5mm] High Amperage Power Jack Ordering Code: high aMPEragE PowEr Jack ordEring codE: R A 10 High Amperage Power Jack Ordering Code: Seal option: Terminal Plating: S - Sealed S - Tin blank - non-sealed R A 10 blank - Silver Locating Post option: Termination Type: P - with Post PC - Through Hole Seal option: blank - without Post Terminal Plating: SM - Surface Mount S - Sealed S - Tin SH - Hybrid blank - non-sealed blank - Silver Notes: 1. Standard packaging is bulk. Contact factory for tube or tape & reel packaging options. Locating Post option: Termination Type: 2. Tin plating currently not available for the hybrid (SH) termination option. P - with Post PC - Through Hole blank - without Post SM - Surface Mount SH - Hybrid Please visit switchcraft.com for the most up-to-date product specifications. Made in USA. Notes: 1. Standard packaging is bulk. Contact factory for tube or tape & reel packaging options. 2. Tin plating currently not available for the hybrid (SH) termination option.
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the S10K?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Conn Power PL 2 POS Solder Lug ST Cable Mount 2 Terminal 1 Port 2P1515
Conn Power F 2 POS Solder Lug ST Panel Mount 3 Terminal 1 Port 712A
Conn Power PL 3 POS 3.3mm Solder RA Thru-Hole 3 Terminal 1 Port 712RA
Conn Power F 2 POS Solder Lug ST Panel Mount 3 Terminal 1 Port 722A
Conn Power PL 3 POS 3.3mm Solder RA Thru-Hole 3 Terminal 1 Port 722RA
Conn Power F 2 POS Solder ST Thru-Hole 3 Terminal 1 Port 732A
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods