CONTENTS
WIRE AND HARNESS ID PRODUCTS 3
Heat Shrink/Cable Markers
Performance Labels
Self-Laminating Labels
Pre-Printed Wire and Cable Markers
LABEL ID PRODUCTS 86
Product Code Cross Reference
Thermal Transfer Labels
Dot Matrix Labels
Laser Labels
HARDWARE/SOFTWARE 134
Printers
Scanners and Imagers
Laser Marking Systems
Ribbons
Software
Application Systems
SPECIALTY PRODUCTS 164
RFID
Pre-Print Services
®
Permark
Rail — Signal Products
Tube and Pipe ID Labels
REFERENCE
OBSOLETE
Printer/Material/Ribbon Cross Reference 180
Master Material Specification Chart 182
NOT the LATEST
Industry Icon Key 186
Part Number Index 187
1
REVISION
Engineering Notes
2
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
HEAT SHRINK/CABLE MARKERS
TMS-SCE Military Grade Sleeves . . . . . . . .4 HTCM-SCE High Temp Tie-on Tags . . . .22
HT-SCE High Temperature Sleeves . . . . . .6 HLX Low Fire Hazard Tie-on Tags . . . . . .24
HX-SCE Low Fire Hazard Sleeves . . . . . . .8 HLX-NEL Low Fire Hazard Tie-On Tags .26
D-SCE Fluid Resistant Sleeves . . . . . . . . .12 HL Tie-On Tags . . . . . . . . . . . . . . . . . . . . . . .28
NBC-SCE Nuclear, Biological and Chemical NMX Flame Retardant
Resistant Sleeves . . . . . . . . . . . . . . . . . . . . .14 Polyaramid Tags . . . . . . . . . . . . . . . . . . . . . .30
RPS Commercial Grade Sleeves . . . . . . .16 MultiMark . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
TMS-CCUV UV Resistant Oversleeves . .18 iMC Snap-on Cable Clip . . . . . . . . . . . . . . .34
CM-SCE Polyolefin Tags . . . . . . . . . . . . . . .20 iKC/iKB Tie-On Cable Clip . . . . . . . . . . . . .36
PERFORMANCE LABELS
VF/NPVF/VF-130 Polyvinyl Fluoride . .38 TTP Polyester . . . . . . . . . . . . . . . . . . . . . . . . .44
RMK-6 Epoxy Coated Polyester . . . . . . .40 HPK Polypropylene . . . . . . . . . . . . . . . . . . .46
RMK Epoxy Coated Polyester . . . . . . . . .42
SELF-LAMINATING LABELS
SB Thermal Transfer Vinyl . . . . . . . . . . . . .48 CSL Polyester Laser Printable . . . . . . . . .60
SP Self Laminating Polyester . . . . . . . . . .50 TKM Self-writable, Self-laminating
Label Booklet . . . . . . . . . . . . . . . . . . . . . . . . .62
PVF Thermal Transfer Polyvinyl
Fluoride . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Label Dimensions . . . . . . . . . . . . . . . . . . . . .64
TW Dot Matrix Vinyl . . . . . . . . . . . . . . . . . .54 TEK Vinyl Fabric Labels . . . . . . . . . . . . . . .66
PV Dot Matrix Polyvinyl Fluoride . . . . . . .56 CMD Label Dispenser . . . . . . . . . . . . . . . . .68
LSR Polyester Laser Printable . . . . . . . . .58 WCD Label Dispenser . . . . . . . . . . . . . . . . .70
PRE-PRINTED WIRE AND CABLE MARKERS
K-Type Cable Markers . . . . . . . . . . . . . . . . .72 O-Type Cable Markers . . . . . . . . . . . . . . . . .80
G-Type Cable Markers . . . . . . . . . . . . . . . . .74 Snap On Markers . . . . . . . . . . . . . . . . . . . . .82
Z-Type Push On Wire Markers . . . . . . . . .76 CWM Wire Marker Cards . . . . . . . . . . . . .84
V-Type Cable Markers . . . . . . . . . . . . . . . . .78
3
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Wire and Harness ID Products
Heat-Shrink/Cable Markers
TMS-SCE Military grade heat shrinkable wire identification sleeves
TMS-SCE marker sleeves are designed to meet the wire and cable
marking needs of manufacturers with high performance
requirements. Made from durable, flame retardant, radiation-
crosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves
can be used in a wide variety of applications. All TMS-SCE meet the
performance requirements of SAE-ASM-DTL-23053/5 class 1.
TMS-SCE-2X meets all of the requirements of SAE-AMS-DTL-
23053/5 classes 1 and 3. The marks are permanent immediately
after printing and remain legible even when exposed to abrasion,
aggressive cleaning solvents, and military fuels and oils. The
sleeves meet the mark permanence requirements of SAE
AS81531 4.6.2 and MIL-STD-202 both before and after
shrinking.
Both 2:1 and 3:1 shrink ratios are available. The 2:1 products
provide a thick, rugged sleeve wall and are particularly easy to
handle. The lightweight 3:1 products provide extremely fast
Temperature rating
shrinking and cover a wider range of wire diameters, thus
Operating temperature range –55°C to +135°C –67°F to +275°F
simplifying inventory.
Minimum recovery temperature +85°C +185°F
The marker sleeves are designed to be printed by computer-driven
Maximum storage temperature +40°C +104°F
dot matrix or thermal transfer printers, providing several
advantages in terms of reduced errors, cycle time and cost.
Specifications/approvals
Supplied in a thin, flat “ladder” format, the sleeves are held
Tyco Electronics RW 2511
horizontally between two hole-punched polyester strips. This
TTDS-023
configuration feeds directly from the storage box into a Tyco
Military SAE-AMS-DTL-23053/5 class1 and 3 (TMS-SCE-2X)
Electronics recommended printer. Tyco Electronics recommended
SAE-AMS-DTL-23053/5 class 1 (TMS-SCE)
ribbons should always be used. The ladder format provides SAE AS81531 4.6.2, MIL-STD-202 Method 215J
automatic kitting of the marker sleeves in the desired sequence. A
Industry UL Recognized – Standard 224, file E35586
standard heat gun with reflector is used to shrink the sleeves onto (TMS-SCE-2X is UL224-VW1 rated. TMS-SCE is UL224-
all tube flame test rated)
the wire or cable.
CSA Certified – File 31929
Features and benefits
Printer information
�
Permanent identification sleeves
Tyco Electronics printer AM6310 (dot matrix)
�
Computer-printable
T200 Series (thermal transfer, low volume)
�
Lightweight for aerospace applications T312M (thermal transfer)
Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix)
�
Military specification material and print performance
TMS-101-RIBBON-4RPSCE (thermal transfer for T208M)
�
2:1 and 3:1 shrink ratio
TMS-RJS-RIBBON-4RPSCE (thermal transfer for T312M))
�
CSA Certified
�
UL Recognized, VW all flame tubing test rated
Part numbering system
1
�
Quick recovery for heat sensitive areas
TMS-SCE - 2X -1K- /8- 2.0-S1-9
Color (white or yellow)
Scoring (optional)
Sleeve length
(2.0" nominal) (omit for 2X)
Inside diameter, as
supplied ( inches)
Standard Pack
(1,000 pieces)
2X is optional (2:1 shrink
ratio: if left out, product
will be 3:1)
Product family
4
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
TMS-SCE Military grade heat shrinkable wire identification sleeves
Ordering information
50mm
(nom )
SOG-ER33-3 BT-M
D d
SOG-ER32-3 BT-M
SOG-ER13-3 BT-M
Available sizes and formats
Inside diameter
Ordering ExpandedRecovered Recommended Recovered wall
description D (minimum) d (maximum) use range thickness Weight
mm inches mm inches mm inches mm inches (g/10 pcs.)
3
TMS-SCE-1K- /32-2.0- 2.36 0.093 0.79 0.031 0.81 - 1.90 0.032 - 0.075 0.53 ± 0.08 0.021 ± 0.003 1.50
3
TMS-SCE-2X-1K- /32- 2.36 0.093 1.17 0.046 1.27 - 1.90 0.050 - 0.075 0.64 ± 0.08 0.025 ± 0.003 2.04
1
TMS-SCE-1K- /8-2.0- 3.18 0.125 1.07 0.042 1.11 - 2.66 0.044 - 0.105 0.58 ± 0.08 0.023 ± 0.003 2.03
1
TMS-SCE-2X-1K- /8- 3.18 0.125 1.58 0.062 1.75 - 2.66 0.069 - 0.105 0.64 ± 0.08 0.025 ± 0.003 2.75
3
TMS-SCE-1K- /16-2.0- 4.75 0.187 1.57 0.062 1.75 - 4.06 0.069 - 0.160 0.58 ± 0.08 0.023 ± 0.003 2.68
3
TMS-SCE-2X-1K- /16- 4.75 0.187 2.36 0.093 2.54 - 4.06 0.100 - 0.160 0.64 ± 0.08 0.025 ± 0.003 3.62
1
TMS-SCE-1K- /4-2.0- 6.35 0.250 2.11 0.083 2.31 - 5.46 0.091 - 0.215 0.58 ± 0.08 0.023 ± 0.003 3.51
1
TMS-SCE-2X-1K- /4- 6.35 0.250 3.18 0.125 3.81 - 5.46 0.150 - 0.215 0.64 ± 0.08 0.025 ± 0.003 5.94
3
TMS-SCE-1K- /8-2.0- 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320 0.61 ± 0.08 0.024 ± 0.003 5.04
3
TMS-SCE-2X-1K- /8- 9.53 0.375 4.75 0.187 5.59 - 8.12 0.220 - 0.320 0.64 ± 0.08 0.025 ± 0.003 8.50
1
TMS-SCE-1K- /2-2.0- 12.70 0.500 4.22 0.166 4.64 - 10.79 0.183 - 0.425 0.61 ± 0.08 0.024 ± 0.003 6.81
1
TMS-SCE-2X-1K- /2- 12.70 0.500 6.35 0.250 6.99 - 10.79 0.275 - 0.425 0.64 ± 0.08 0.025 ± 0.003 11.45
3
TMS-SCE-1K-- /4-2.0- 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640 0.61 ± 0.08 0.024 ± 0.003 12.03
3
TMS-SCE-2X-1K- /4- 19.05 0.750 9.53 0.375 10.16 - 16.25 0.400 - 0.640 0.76 ± 0.08 0.030 ± 0.003 20.63
TMS-SCE-1K-1-2.0- 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850 0.64 ± 0.08 0.025 ± 0.003 15.35
1
TMS-SCE-1K-1 /2-2.0- 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300 0.51 ± 0.08 0.020 ± 0.003 27.51
TMS-SCE-1K-2-2.0- 50.80 2.000 25.40 1.000 27.94 - 44.95 1.100 - 1.750 0.64 ± 0.08 0.025 ± 0.003 47.27
1
TMS-SCE-1K-2 /4-2.0- 57.15 2.250 19.05 0.750 22.32 - 50.80 0.880 - 2.000 0.76 ± 0.08 0.030 ± 0.003 42.06
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple markers from each sleeve.
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package sizes Standard 1K - 1000-piece packs
Nonstandard Smaller and larger pack sizes are available. Please contact Tyco Electronics.
Colors Standard Yellow White
Code 4 9
Nonstandard Red Pink Orange Green Blue Violet Gray Black
Code 22L 3567 80
Note: 3:1 products yellow and white meet the color requirements of MIL-STD-104 class 1. Otherwise colors are pastel for print contrast.
Ordering information: Specify product name, pack size, sleeve size, prescore format, and color.
1
Ordering example: TMS-SCE-1K- /8-2.0-S1-9 (scored once)
TMS-SCE-2X only available in white
5
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HT-SCE High temperature, low outgassing heat-shrinkable wire identification sleeves
HT-SCE wire markers are designed for use in high temperature
applications or where extreme resistance to fuels, lubricants and
cleaning solvents is required. They are also ideal for applications in
which low-vacuum outgassing is of high importance. The marker
sleeves are made of highly flame retardant, heat-shrinkable fluo-
ropolymer tubing.
HT-SCE markers are supplied as a thin, flat “ladder” of sleeves held
horizontally between two polyester strips. This configuration feeds
directly from the storage box into standard Tyco Electronics
recommended printers, with no modifications necessary. A strip of
adhesive tape on each side of the sleeves holds them securely in
place for printing and kitting, yet the sleeves pull easily from the
carrier strips. A standard heat gun with reflector is used to shrink
the sleeves onto the wire or cable to achieve a permanent mark.
After shrinking, HT-SCE markers meet the print performance
requirements of SAE AS81531 4.6.2 and MIL-STD-202. HT-SCE
markers are supplied in boxes of 1000 sleeves and are available
in nine diameter sizes. These cover substrates from 0.8mm to
Temperature rating
34.0mm. Because of this versatility, customers need not carry a
Operating temperature range –55°C to +225°C –67°F to +437°F
large inventory of markers.
Minimum recovery temperature +200°C +392°F
Maximum storage temperature +40°C +104°F
Features and benefits
�
Permanent identification sleeves
Specifications/approvals
� Tyco Electronics RW 2512
High continuous operating temperature
TTDS-020
�
Extreme fluid resistance
Military SAE AS 81531 4.6.2
�
Low-vacuum outgassing
MIL-STD-202 Method 215J
�
Wide range of sleeve sizes for several wire
and bundle diameters
Printer information
Tyco Electronics printer T312M (thermal transfer)
Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer)
Part numbering system
1
HT-SCE - 1K- /4 -2.0 -S1-0
Color
Scoring (optional)
Sleeve length (inches)
Expanded inside diameter (inches)
Pack size
Product family
6
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HT-SCE High temperature, low outgassing heat-shrinkable wire identification sleeves
Ordering information
50mm
(nom )
SOG-ER33-3 BT-M
D
SOG-ER32-3 BT-M d
SOG-ER13-3 BT-M
Available sizes and formats
Inside diameter
Ordering D (min) d (max) Recommended
description As supplied After recovery use range
mm inches mm inches mm inches
3
HT-SCE-1K- /32 -2.0- 2.36 0.093 0.79 0.031 0.81 - 1.90 0.032 - 0.075
1
HT-SCE-1K - /8 -2.0- 3.18 0.125 1.58 0.062 1.75 - 2.66 0.069 - 0.105
3
HT-SCE-1K- /16 -2.0- 4.75 0.187 2.36 0.093 2.54 - 4.06 0.100 - 0.160
1
HT-SCE-1K- /4 -2.0- 6.35 0.250 3.18 0.125 3.40 - 6.00 0.134 - 0.236
3
HT-SCE-1K- /8 -2.0- 9.53 0.375 4.75 0.187 5.30 - 8.10 0.209 - 0.319
1
HT-SCE-1K- /2 -2.0- 12.70 0.500 6.35 0.250 6.60 - 11.40 0.260 - 0.449
3
HT-SCE-1K- /4 -2.0- 18.00 0.709 9.00 0.354 9.90 - 15.30 0.390 - 0.602
HT-SCE-1K-1-2.0- 25.40 1.000 12.70 0.500 13.30 - 23.00 0.524 - 0.906
1
HT-SCE-1K-1 /2 -2.0- 38.10 1.500 19.05 0.750 20.95 - 34.00 0.825 -1.339
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple marker sleeves from each HT-SCE sleeve
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package size Standard 1K - 1000 piece packs
Nonstandard Larger pack sizes are available. Please contact Tyco Electronics.
Colors Standard White Black
Code 9 0
Nonstandard Pink Blue Yellow
Code 2L 6 4
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
1
Ordering example: HT-SCE-1K- /4-2.0-S1-9
7
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
Thin wall, zero-halogen, low smoke, low toxicity, radiation cross-
linked, UV stabilised polyolefin heat-shrinkable tubing, assembled
as cut sleeves organized in a ladder format.
Identification of wires and cables by computer-based printing onto
sleeves. Ideal for applications where limited fire hazard
characteristics are necessary. The zero halogen material coupled
with low smoke and low toxic fume emissions make this product
best used in enclosed spaces such as mass transit, marine and
industrial installations.
This product is not recommended where strain relief properties are
required.
Features and benefits
�
Low fire hazard properties, low smoke, low toxicity, low
flammability. Meets industry standard BS 6853 (1999)
Vehicle Category 1a
Temperature rating
�
Superb print quality to give crisp clear identification
Operating temperature range –30°C to +105°C –22°F to +221°F
marker sleeve
Minimum recovery temperature +120°C +248°F
Maximum storage temperature +40°C +104°F
�
Excellent print permanence when tested in demanding
industry related fluids
Specifications/approvals
�
Choice of printer options
Tyco Electronics RW 2072
� TTDS-108
Sleeve diameters from 2.4mm to 38.1mm
Military SAE AS81531 4.6.2
�
Sleeve length from 12.7mm to 50.8mm
MIL-STD-202 Method 215J
�
Industry BS 6853 [1999] – Vehicle Category 1a
Sleeves are printable on both sides for ease of
identification or inclusion of additional information
LUL toxic fume (LUL E1042:A6 [2002})
to the marker sleeve
- No halogen, O, N or S sources
� Printer information
Shrink ratio of 2:1 - recovers to half of the original
diameter
Tyco Electronics printers T312M and T212M (thermal transfer)
Tyco Electronics ribbons 1966 - RIBBON (T312M)
T200 - RIBBON-1966 (T212M)
Part numbering system
HX-SCE- 1K-4.8 - 50 - S1 - 4
Color
Scoring (optional)
Sleeve length (mm)
Expanded inside diameter (inches)
Pack size
Product family
8
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
Ordering information
Available sizes and formats
Inside diameter
Ordering D (min) d (max) Recommended
description as supplied after recovery use range
mm inches mm inches mm inches
HX-SCE-1K-2.4 - 50- 2.40 0.094 1.19 0.047 1.27 - 1.90 0.050 - 0.075
HX-SCE-1K-3.2 - 50- 3.20 0.126 1.58 0.060 1.765 - 2.66 0.069 - 0.105
HX-SCE-1K-4.8 - 50- > 4.80 0.189 2.36 0.090 2.54 - 4.06 0.100 - 0.160
HX-SCE-1K-6.4 - 50- 6.40 0.250 3.18 0.125 3.81 - 5.46 0.150 - 0.215
HX-SCE-1K-9.5 - 50- 9.50 0.375 4.75 0.187 5.59 - 8.12 0.220 - 0.320
HX-SCE-1K-12.7 - 50- 12.70 0.500 6.35 0.250 6.99 - 10.79 0.275 - 0.425
HX-SCE-1K-19.0 - 50- 19.00 0.730 9.53 0.375 10.16 - 16.25 0.400 - 0.640
HX-SCE-1K-25.4 - 50- 25.40 1.000 12.70 0.500 14.29 - 21.59 0.563 - 0.850
HX-SCE-1K-38.1 - 50- 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300
Options
Prescoring Perforated score to produce multiple marker sleeves from each HX-SCE sleeve.
Nonstandard Side scored
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package sizes Standard 1K - 1000 piece packages available for all HX-SCE sizes up to 25.4
Nonstandard 2.5K - 2500 pieces available for 4.8 and 6.4 HX-SCE sizes
5K - 5000 pieces available for 2.4 and 3.2 HX-SCE sizes
250 piece package available for all HX-SCE sizes
Colors Standard Yellow White
Code 4 9
Nonstandard Red Green Blue Orange
Code 2 5 6 3
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: HX-SCE-1K--50-S1-4
9
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
Industry Standards
Standard Title Application
BS6853 Code of practice for fire precautions in the design Interior minor use materials of mass 100g to 500g.
and construction of passenger carrying trains. Vehicle category Ia.
1
London Underground Limited Fire Safety Performance of Materials Limited, dispered usage (abbreciation RS/EQ/I)
Standard 2-01001-002
NF F 16-101 Railway Rolling Stock Fire behavior choice of materials Rolling Stock Classification A1
DIN 5510-2 Preventive fire protection in railway vehicles - Part 2: Fire Dripping Classification ST2
behavior and fire side effects of materials and parts;
Classification, Requirements and Test Methods.
2
EN50343 Railway Applications - Rolling Stock - Tests on marking when using heat-shrinkable sleeves
Rules for installation of cabling.
1
This replaces LUL Engineering Standard E1042
2
Not including resistance to liquid fuel - not recommended for use in areas where the sleeves may be subject to extended contact from diesel fuel - Tyco Electronics D-SCE
product range is designed for use in these areas.
10
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
Technical Information
P Pr ri in nt t M Me et th ho od d/ /R Ri ib bb bo on n: :
T312M-PRINTER with 1966-RIBBON or
T212M-PRINTER with T200-1966-RIBBON
S Se er rv vi ic ce e T Te em mp pe er ra at tu ur re e -30˚C to +105˚C (-22˚F to +221˚F)
M Mi in ni im mu um m S Sh hr ri in nk k T Te em mp pe er ra at tu ur re e 136˚C (275˚F)
C Co ol lo or rs s: :
White or yellow.
Other colors available on request.
F Fl la am mm ma ab bi il li it ty y: : S Se el lf f- -e ex xt ti in ng gu ui is sh hi in ng g - -
(ASTM D2671 Procedure B).
O Ox xy yg ge en n I In nd de ex x ( (B BS S6 68 85 53 3: : P Pa as ss s 3 34 4% % M Mi in n. .) ) - -
(BS EN ISO 4589-2 [1999]).
(AFNOR NF F 16-101 Class 12).
D Dr ri ip pp pi in ng g C Cl la as ss si if fi ic ca at ti io on n S ST T2 2 - -
(DIN 5510-2)
S Sm mo ok ke e: : A A0 0- -0 0. .0 01 17 7 M Ma ax x. . (BS 6853 [1999]
Annex D [D.8.3] Small scale test
S Sm mo ok ke e I In nd de ex x D De et te er rm mi in na at ti io on n ( (I IF F) )
M Ma ax xi im mu um m 0 0, , S Sm mo ok ke e C Cl la as ss s F F1 1 -
(AFRNOR NF F 16-101-1988 Smoke Index)
T To ox xi ic ci it ty y: : R R < < 1 1 - (BS 6853 [1999] Annex B -
AFNOR NF X 70-100 Determination of
weighted summation of toxic fume, mass
based method)
L LU UL L T To ox xi id d F Fu um me e: : N No o. . H Ha al lo og ge en ns s, , N No o. . P P, , S S o or r
N N s so ou ur rc ce es s a ab bo ov ve e t tr ra ac ce e l le ev ve el l - -
(LUL E1042: A6 [2002]) -
London Underground Standard 2-01001-002,
section 5.2.3 Chemical composition/toxicity)
T To ox xi ic ci it ty y I In nd de ex x = = 0 0. .3 34 4 -
(CEI 20-37-7-09-1997 Determination of
toxicity index of gasses from combustion of
organic material
D Di ie el le ec ct tr ri ic c S St tr re en ng gt th h: : 15V/mm minimum.
W Wa at te er r A Ab bs so or rp pt ti io on n 11% maximum after 24 hours at 23C (73˚F)
C Co op pp pe er r M Mi ir rr ro or r C Co or rr ro os si io on n: : 8% maximum after 16 hours of 150˚C (302˚F)
L Lo on ng gi it tu ud di in na al l C Ch ha an ng ge e: : +5% to -10%.
T Te en ns si il le e S St tr re en ng gt th h: : 7MPa minimum.
U Ul lt ti im ma at te e E El lo on ng ga at ti io on n: : 80% minimum.
S Se ec ca an nt t M Mo od du ul lu us s: : 200MPa mimum at 2% elongation.
U UL L R Re es si is st ta an nc ce e: : Tensile strength >90% & ultimate elongation
>40% or original value after 1000 hours
(ASTM G53: UVA [100% dry cycle]; UVB
[8 hours dry/4 hours wet cycle]).
P Pr ri in nt t P Pe er rm ma an ne en nc ce e: : ADHERENCE - Meets the requirements of
SE AS81531 4.6.2 (50 rubs).
FLUID RESISTANCE - Meets the
requirements of MIL-STD-202 method 215J.
11
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
D-SCE Fluid resistant heat-shrinkable wire identification sleeves
D-SCE markers are used to identify wires and cables where
exposure to organic fluids, especially oils, is required. D-SCE
markers are designed to operate in these conditions at elevated
temperatures for extended periods of time, making them ideal in
aerospace, rail and construction industries. The D-SCE markers are
suitable for use in environments with temperatures of – 55°C to
+135°C (– 67°F to +275°F), and will provide strain relief,
insulation and protection from mechanical abuse. The 3:1 shrink
ratio markers* are assembled in a ladder format enabling sleeves to
be printed on both sides for maximum data content and
readability.
*See ordering description.
Features and benefits
�
Resistance to organic fluids, common fuels, lubricants
and solvents
Temperature rating
�
3:1 shrink ratio
Operating temperature range –55°C to +135°C –67°F to +275°F
Minimum recovery temperature +135°C +275°F
�
Wide range of sizes for several wire and bundle diameters
Maximum storage temperature +40°C +104°F
�
Formulated for use in aerospace, rail and construction
equipment
Specifications/approvals
�
Dot matrix and thermal transfer printable — both print Tyco Electronics RW 2519
technologies meet all specifications and approvals listed
TTDS-017
Military SAE-AMS-DTL-23053/6, Class 1
(material and performance requirements)
SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry NF F 00 608 Category A and H
Printer information
Tyco Electronics printer AM6310 (dot matrix)
T312M (thermal transfer)
Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix)
1966-RIBBON
Part numbering system
D-SCE - 5K - 3.2 - 50 - S1- 4
Color
Scoring (optional)
Sleeve length (mm)
Expanded inside diameter (mm)
Large packaging (optional)
Product family
12
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
D-SCE Fluid resistant heat-shrinkable wire identification sleeves
Ordering information
50mm
(nom )
SOG-ER33-3 BT-M
D
SOG-ER32-3 BT-M d
SOG-ER13-3 BT-M
Available sizes and formats
Inside diameter
Ordering D (min) d (max) Recommended
description As supplied After recovery use range
mm inches mm inches mm inches
D-SCE-1K-2.4-50- 2.39 0.094 0.79 0.031 0.81 - 1.90 0.032 - 0.075
D-SCE-1K-3.2-50- 3.18 0.125 1.07 0.043 1.11 - 2.66 0.044 - 0.105
D-SCE-1K-4.8-50- 4.75 0.187 1.57 0.063 1.75 - 4.06 0.069 - 0.160
D-SCE-1K-6.4-50- 6.35 0.250 2.11 0.084 2.31 - 5.46 0.091 - 0.215
D-SCE-1K-9.5-50- 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320
D-SCE-1K-12-50- 12.70 0.500 4.22 0.167 4.64 - 10.79 0.183 - 0.425
D-SCE-1K-18-50- 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640
D-SCE-1K-25-50- 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850
D-SCE-1K-38-50-* 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300
* 2:1 shrink ratio
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple marker sleeves from each D-SCE sleeve.
Standard Side scored
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package sizes Standard 1K - 1000 piece packages available for all D-SCE sizes
Nonstandard Larger pack sizes are available. Please contact Tyco Electronics.
Colors Standard White Yellow
Code 9 4
Nonstandard Pink Blue
Code 2L 6
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: D-SCE-1K-6.4-50-S2-4
13
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
NBC-SCE Nuclear, biological, chemical resistant heat-shrinkable
wire identification sleeves
Tyco Electronics NBC-SCE is used to identify wire and cables
where extreme resistance to cleaning solvents is needed. The
markers are suitable for use in wire harness systems requiring high
fluid resistance and resistance to the effects of nuclear, biological
and chemical agent exposure and decontamination. The markers
should be used with an appropriate transparent oversleeve whose
ends are sealed with an appropriate epoxy adhesive.
NBC-SCE marker sleeves are suitable for use in environments with
temperatures from –55°C to +225°C (–67°F to +437°F).
Features and benefits
�
Permanent identification sleeves
�
Computer-printable
�
2:1 shrink ratio
�
NBC application with the appropriate adhesive and oversleeve
Temperature rating
Operating temperature range –55°C to +225°C –67°F to +437°F
Minimum recovery temperature +200°C +392°F
Maximum storage temperature +40°C +104°F
Specifications/approvals
Tyco Electronics RW 2514
Military SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Printer information
Tyco Electronics printer T312M (thermal transfer)
Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal
transfer)
Part numbering system
1
NBC-SCE - 1K- /4 -2.0-S1-9
Color
Scoring (optional)
Sleeve length (inches)
Expanded inside diameter (inches)
Large packaging (optional)
Product family
14
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
NBC-SCE Nuclear, biological, chemical resistant heat-shrinkable
wire identification sleeves
Ordering information
50mm
(nom )
SOG-ER33-3 BT-M
D
SOG-ER32-3 BT-M d
SOG-ER13-3 BT-M
Available sizes and formats
Inside diameter
Ordering ExpandedRecovered Recommended Recovered wall
description D (minimum) d (maximum) use range thickness
mm inches mm inches mm inches mm inches
1/
NBC-SCE-1K- 8- 2.0 3.43 0.135 1.59 0.062 1.75-2.66 0.069-0.105 0.38 ± 0.08 0.015 ± 0.003
1
NBC-SCE-1K- /4- 2.0 6.35 0.250 3.18 0.125 3.81-5.46 0.150-0.215 0.38 ± 0.08 0.015 ± 0.003
1/
NBC-SCE-1K- 2- 2.0 12.70 0.500 6.35 0.250 6.99-10.79 0.275-0.425 0.38 ± 0.08 0.015 ± 0.003
3/
NBC-SCE-1K- 4- 2.0 19.05 0.750 9.53 0.375 10.16-16.25 0.400-0.640 0.38 ± 0.08 0.015 ± 0.003
NBC-SCE-1K-1- 2.0 25.40 1.000 12.70 0.500 14.70-21.50 0.578-0.846 0.43 ± 0.10 0.017 ± 0.004
1
/
NBC-SCE-1K-1- 2- 2.0 38.10 1.500 19.05 0.750 20.95-33.02 0.825-1.300 0.43 ± 0.10 0.017 ± 0.004
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple marker sleeves from each NBC-SCE sleeve.
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package sizes Standard 1000 piece packages available for all NBC-SCE sizes
Colors Standard White
Code 9
Ordering information: Please specify product name, pack size, sleeve size, prescore, format and color.
1
/
Ordering example: NBC-SCE-1K- 8-2.0-9
15
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
RPS Commercial grade heat-shrinkable wire identification sleeves
RPS markers are heat shrinkable marking sleeves for wire and
cable identification. When RPS is printed with Tyco Electronics
recommended printers and ink ribbons, the marks remain legible,
without any post printing process, even when exposed to
abrasion, aggressive cleaning solvents, and industrial fluids.
RPS markers are designed to meet the wire identification needs of
commercial and industrial customers.
Features and benefits
�
Permanent identification sleeves
�
Computer printable
�
Excellent print performance
�
Configured for ease of kitting
�
Good chemical and solvent resistance
�
3:1 shrink ratio
�
CSA Certified, UL Recognized Temperature rating
Operating temperature range –30°C to +105°C –22°F to +221°F
Minimum recovery temperature +85°C +185°F
Maximum storage temperature +40°C +104°F
Specifications/approvals
Tyco Electronics RW 2510
TTDS-019
Military SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry UL Recognized – standard 224,
file E35586
CSA Certified – file 31929
Printer information
Tyco Electronics printer AM6310 (dot matrix)
T208M (thermal transfer – low volume)
T312M (thermal transfer)
Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix)
TMS-101-RIBBON-4RPSCE (thermal transfer
for T208M)
TMS-RJS-RIBBON-4RPSCE (thermal transfer
for T312M)
Part numbering system
RPS-1K-22-18/2.0-S1-9
Color
Scoring (optional)
Sleeve length (inches)
US wire gauge size
Pack size
Product family
16
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
RPS Commercial grade heat-shrinkable wire identification sleeves
Ordering information
50mm
(nom )
SOG-ER33-3 BT-M
D
SOG-ER32-3 BT-M d
SOG-ER13-3 BT-M
Available sizes and formats
Inside diameter
Ordering D (min) d (max) Recommended
description as supplied after recovery use range
mm inches mm inches mm inches
RPS-1K-22-18/2.0- 3.18 0.125 1.07 0.042 1.17 - 2.66 0.046 - 0.105
RPS-1K-18-12/2.0- 4.75 0.187 1.57 0.062 1.75 - 4.06 0.069 - 0.160
RPS-1K-16-10/2.0- 6.35 0.250 2.11 0.083 2.31 - 5.46 0.091 - 0.215
RPS-1K-8-4/2.0- 9.53 0.375 3.18 0.125 3.47 - 8.12 0.137 - 0.320
RPS-1K-10-2/2.0- 12.70 0.500 4.22 0.166 4.64 - 10.79 0.183 - 0.425
RPS-1K-6-250/2.0- 19.05 0.750 6.35 0.250 6.99 - 16.25 0.275 - 0.640
RPS-1K-1-400/2.0- 25.40 1.000 8.46 0.333 9.29 - 21.59 0.366 - 0.850
RPS-1K-400-1000/2.0- 38.10 1.500 19.05 0.750 20.95 - 33.02 0.825 - 1.300
Total width as supplied 90.18 mm (3.550 inches) including tape and carrier width.
Options
Prescoring Perforated score to produce multiple marker sleeves from each RPS sleeve.
Number of prescores 1 prescore 2 prescores 3 prescores
Code S1 S2 S3
Package sizes Standard 1K -1000 piece packs
Nonstandard Smaller and larger pack sizes are available. Please contact Tyco Electronics.
Colors Standard White Yellow
Code 9 4
Ordering information: Specify product name, pack size, sleeve size, prescore, format and color.
Ordering example: RPS-1K-22-18/2.0-S2-9
17
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
TMS-CCUV Heat-shrinkable UV protection sleeves
TMS-CCUV clear heat shrinkable sleeves are designed for over
protection of TMS System Six identification products, to give
increased protection for permanent, long-term environmental
exposure. The clear CCUV heat-shrinkable sleeves are formulated
to combine a long-term barrier to the effects of ultra-violet, with
tough resistance to abrasion and industrial fluids. They are
available in packs which match the product sizes and pack
quantities of TMS System Six heat-shrinkable identification sleeves
and cable markers.
The TMS CCUV sleeves are inherently low profile and use the
action of heat-shrink to lock in place over the previously installed
identification sleeves; except for cable markers which use a slide
fitting CCUV sleeve which is held in place by the cable ties.
The action of heat-shrink locking of the CCUV sleeves means there
is no reliance on the long term performance of adhesives to hold Temperature rating
the outer protection layer in place, and also gives the ability to
Operating temperature range –55°C to +150°C –67°F to 302°F
accommodate cables and wire bundles which may be bent or
Minimum recovery temperature +150°C +302°F
flexed during use.
Maximum storage temperature +40°C +104°F
Features and benefits
Specifications/approvals
�
Exceptional clarity and stability
Tyco Electronics RW 2525
Military UL VW-1 rated
�
Added UV-resistant sleeves
SAE-AMS-DTL-23053/18, Class 2
�
Not printable
Part numbering system
�
Tough resistance to abrasion and industrial fluids
TMS-CCUV- SLEEVE-1- X- 65mm
�
Heat-shrink locking in place (no reliance on adhesives)
Sleeve length (mm)
�
Low profile
Color (clear for all)
�
Accommodates bent or flexing cable/wire bundles Sleeve reference
Loose sleeves
�
Can work as an NBC (nuclear, biological, chemical) System with
CCUV sleeve
NBC-SCE sleeves and appropriate adhesive
Ordering information
Before shrinking After shrinking over TMS cable sleeve
TMS IDENT SLEEVE
D
60mm to 65m m
L Wire dia.
After shrinking over TMS cable marker
After sliding over TMS cable marker
TMS CABLE
MARKER
TMS CABLE MARKER
32mm
Cable dia.
60mm to 65m m
18
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
TMS-CCUV Heat-shrinkable UV protection sleeves
Available sizes and formats
(For use with heat shrink sleeves)
Inside Recovered Wire Sleeve size
Ordering Sleevediameterdiameter size expanded diameter
description length minimum maximum diameter TMS-SCE RPS
mm mm inches mm inches mm inches mm inches US Wire gauge
TMS-CCUV-SLEEVE-1-X-65mm 65 3.20 0.125 1.60 0.063 1.80-2.80 0.071-0.110 2.40 0.094 N/A
TMS-CCUV-SLEEVE-1-X-65mm 65 3.20 0.125 1.60 0.063 1.80-2.80 0.071-0.110 3.20 0.125 22-18
TMS-CCUV-SLEEVE-2-X-65mm 65 4.80 0.187 2.40 0.094 2.60-3.70 0.102-0.146 4.80 0.188 18-12
TMS-CCUV-SLEEVE-2-X-65mm 65 4.80 0.187 2.40 0.094 2.60-3.70 0.102-0.146 6.40 0.250 16-10
TMS-CCUV-SLEEVE-3-X-65mm 65 6.40 0.250 3.20 0.126 3.50-5.10 0.138-0.201 9.50 0.375 8-4
TMS-CCUV-SLEEVE-4-X-65mm 65 9.50 0.375 4.80 0.189 5.00-7.00 0.197-0.275 12.70 0.500 10-2
TMS-CCUV-SLEEVE-5-X-65mm 65 12.70 0.500 6.40 0.252 6.90-10.60 0.272-0.417 19.00 0.750 6-250
TMS-CCUV-SLEEVE-6-X-65mm 65 19.00 0.750 9.50 0.374 10.00-14.00 0.394-0.551 25.40 1.000 1-400
TMS-CCUV-SLEEVE-7-X-65mm 65 25.40 1.000 12.70 0.500 13.30-21.00 0.524-0.827 25.40 1.000 1-400
TMS-CCUV-SLEEVE-8-X-65mm 65 38.10 1.500 19.00 0.748 21.00-33.80 0.827-1.331 38.10 1.500 400-1000
Some sleeve sizes may need to be recovered partially before CCUV sleeve is applied to protect them.
(For use with cable markers to secure / protect without cable ties)
Inside Recovered Wire Marker
Ordering Sleeve diameter diameter size height
description length minimum maximum diameter
mm inches mm inches mm inches mm inches
TMS-CCUV-SLEEVE-4-X-65mm 65 9.50 0.375 4.80 0.189 5.00-8.00 0.197-0.315 6.40 0.250
TMS-CCUV-SLEEVE-5-X-65mm 65 12.70 0.500 6.40 0.252 7.00-11.00 0.275-0.433 6.40 0.250
TMS-CCUV-SLEEVE-6-X-65mm 65 19.00 0.750 9.50 0.374 12.00-17.00 0.472-0.669 12.70 0.500
TMS-CCUV-SLEEVE-7-X-65mm 65 25.40 1.000 12.70 0.500 15.00-23.00 0.590-0.905 12.70 0.500
(For use with cable markers to protect with cable ties)
Inside Recovered Wire Marker
Ordering Sleeve diameter diameter size height
description length minimum maximum diameter
mm mm inches mm inches mm inches mm inches
TMS-CCUV-SLEEVE-9-X-32mm 32 6.40 0.250 3.20 0.126 N/A 6.40 0.250
TMS-CCUV-SLEEVE-10-X-32mm 32 12.70 0.500 6.40 0.252 N/A 12.70 0.500
(For use with NBC-SCE sleeves and adhesives sealing*)
Inside Recovered Wire size Sleeve size
Ordering Sleeve diameter diameter diameter expanded diameter
description length minimum maximum NBC-SCE NBC-SCE
mm mm inches mm inches mm inches mm inches
TMS-CCUV-SLEEVE-15 76 3.20 0.125 1.60 0.063 1.80-2.80 0.071-0.110 3.20 0.125
TMS-CCUV-SLEEVE-16 76 4.80 0.187 2.40 0.094 2.60-3.70 0.102-0.146 4.80 0.188
TMS-CCUV-SLEEVE-17 76 6.40 0.250 3.20 0.126 3.50-5.10 0.138-0.201 6.40 0.250
TMS-CCUV-SLEEVE-18 76 9.50 0.375 4.80 0.189 5.00-7.00 0.197-0.275 9.50 0.375
TMS-CCUV-SLEEVE-19 76 12.70 0.500 6.40 0.252 6.90-10.60 0.272-0.417 12.70 0.500
TMS-CCUV-SLEEVE-20 76 19.00 0.750 9.50 0.374 10.00-14.00 0.394-0.551 19.00 0.750
TMS-CCUV-SLEEVE-21 76 25.40 1.000 12.70 0.500 13.30-21.00 0.524-0.827 25.40 1.000
TMS-CCUV-SLEEVE-22 76 38.10 1.500 19.00 0.748 21.00-33.80 0.827-1.331 38.10 1.500
*For use with adhesives such as S-1255-04 and S-1264 please refer to RT1012 and RT1014 for specifications and adhesive details.
Options
Prescoring Not available — supplied as cut pieces.
Package Sizes Standard 250 piece bags only
Colors Standard Clear only
Ordering information: Specify product name, loose sleeve, sleeve reference, color and sleeve length.
Ordering example: For all Heat Shrink sleeves except NBC-SCE
TMS-CCUV-SLEEVE-1-X- 65mm
For NBC-SCE
TMS-CCUV-SLEEVE-22
19
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
CM-SCE Military grade tie-on cable marker tags
CM-SCE markers are flat, rigid, non-adhesive labels that can be
used to identify large cables and wire bundles in environments
such as military and aerospace. Marker tags are applied to cables
or wire bundles with cable ties.
Print performance meets or exceeds the requirements of
SAE AS81531 4.6.2 and MIL-STD-202.
Features and benefits
�
Side entry provides access to big size and wire bundles
as well as retrofit and repair capability
�
Highly flame-retardant
�
Highly resistant to abrasion, mechanical abuses, fluids,
lubricants and solvents
�
Ease of use: markers can be easily removed from the carrier
�
Easy installation: only standard cable tie-wraps
Temperature rating
are needed to install markers. No extra steps required
Operating temperature range –55°C to +135°C –67°F to +275°F
�
Excellent print permanence when printing on the rough
side of the marker
Specifications/approvals
Tyco Electronics RW 2513
TTDS-021
Military Mark permanence: SAE AS81531 4.6.2
Solvent resistance: MIL-STD-202
Method 215J
Industry UL MH26328 Group PG1S2
Printer information
Tyco Electronics printer AM6310 (dot matrix)
T312M (thermal transfer)
Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix) (dot matrix)
1966-RIBBON (thermal transfer)
Part numbering system
1
CM-SCE - 2.5K - /4 - 4H-9
Color
Tie-wrap holes
Markable height of marker (inches)
Pack size
Product family
20
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
CM-SCE Military grade tie-on cable marker tags
Ordering information
Figure 1
1
CM-SCE- /4 INCH
Available sizes and formats
Ordering Size Markable Markable Recommended
description height length use range
mm inches mm inches mm inches
1 1
CM-SCE- /4-6H- /4 6.40 0.250 50.80 2.000 5.08 – 12.50 0.200 – 0.492
1 1
CM-SCE- /4-4H- /4 6.40 0.250 50.80 2.000 5.08 – 12.50 0.200 – 0.492
1 1
CM-SCE-TP- /4-4H- * /4 6.40 0.250 50.80 2.000 5.08 – 12.50 0.200 –0.492
1 1
CM-SCE- /2-4H- /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up
1 1
CM-SCE-TP- /2-4H- * /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up
1 1
CM-SCE- /2-6H- /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up
1 1
CM-SCE-TP- /2-6H- * /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up
* f fo or r t th he er rm ma al l t tr ra an ns sf fe er r p pr ri in nt ti in ng g
Options
1
Tie-wrap holes /4- inch tags Four holes standard
1
/2- inch tags Four holes Six holes
Code 4H 6H
Fanfold Code Fx (substitute package size code for “x”)
Package sizes Standard 250 pieces
Colors Standard White
Code 9
Nonstandard Yellow
Code 4
Ordering information: Specify product name, markable height of marker, pack size, number of tie wraps and color.
1
Ordering example: CM-SCE--2.5K - /4-4H-9
21
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HTCM-SCE High temperature, low outgassing tie-on-cable marker tags
HTCM-SCE markers are flat, rigid, non-adhesive labels that can be
used to identify large cables and wire bundles in high temperature
environments and outer space applications where low vacuum
outgassing is required. Marker tags are applied to cables or wire
bundles using cable ties.
Print performance meets or exceeds the requirements of
SAE AS81531 4.6.2 and MIL-STD-202.
Features and benefits
�
Side entry provides access to big size cables and wire
bundles as well as retrofit and repair capability
�
High temperature use
�
Highly flame-retardant
�
Highly resistant to abrasion, mechanical abuses, fluids,
lubricants and solvents Temperature rating
Operating temperature range –55°C to +225°C –67°F to +437°F
�
Low vacuum outgassing for outer space applications
�
Ease of use: markers can be easily removed from the carrier
Specifications/approvals
Tyco Electronics RW 2524
�
Easy installation: only standard cable tie-wraps are
TTDS-022
needed to install markers. No extra steps required
Military Mark permanence: SAE AS81531 4.6.2
�
Excellent print permanence when printing on the rough side
Solvent resistance: MIL-STD-202
of the marker
Method 215J
Printer information
Tyco Electronics printer T312M (thermal transfer)
Tyco Electronics ribbon TMS-RJS-RIBBON-4HT (thermal transfer)
Part numbering system
1
HTCM-SCE - 2.5K - /4 - 4H-9
Color
Tie-wrap holes
Markable height of marker (inches)
Pack size
Product family
22
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HTCM-SCE High temperature, low outgassing tie-on-cable marker tags
Ordering information
Figure 1
1
HTCM-SCE- /4 INCH
Available sizes and formats
Ordering Size Markable Markable Recommended
description height length use range
mm inches mm inches mm inches
1 1
HTCM-SCE-TP- /4-4H- /4 6.40 0.250 50.80 2.000 5.08 – 12.50 0.200 – 0.492
1 1
HTCM-SCE-TP- /2-4H- /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up
1 1
HTCM-SCE-TP- /2-6H- /2 12.70 0.500 50.80 2.000 12.50 and up 0.492 and up
Options
1
Tie-wrap holes /4- inch tags Four holes standard
1
/2- inch tags Four holes Six holes
Code 4H 6H
Fanfold Code Fx (substitute package size code for “x”)
Package sizes Standard 250 pieces
Colors Standard White
Code 9
Nonstandard Yellow
Code 4
Ordering information: Specify product name, markable height of marker, pack size, number of tie wraps and color.
1
Ordering example: HTCM-SCE - 2.5K -- /4--4H-9
23
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HLX Low fire hazard tie-on cable marker tags
HLX cable markers are made from zero halogen, low smoke, low
toxicity, radiation cross-linked, UV stabilized polyolefin sheet,
formed into punched organized cable markers on a paper carrier.
They are used for identification of cables and wire bundles by
computer-based printing onto markers. Markers are attached using
cable ties. HLX markers are ideal for applications where limited fire
hazard characteristics are necessary.
Features and benefits
�
Recommended for use where combustion of products may
endanger personnel or place delicate electronics at risk
�
Several printable heights and widths available
Temperature rating
Operating temperature range –40°C to +105°C –40°F to +221°F
Specifications/approvals
Tyco Electronics RW 2523
TTDS-013
Military SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry BS 4G 198 Part 3
ASTM D 2671
Printer information
Tyco Electronics printer T312M (thermal transfer)
Tyco Electronics ribbon 1966-RIBBON
Part numbering system
HLX 150 YW 1 TS 033 B
Pack size
Printable width (mm)
Format
Scoring
Color
Marker height
Product family
24
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HLX Low fire hazard tie-on cable marker tags
Ordering information
Available sizes and formats
Ordering Marker dimensions Printable area Pack
description (W x H) (W x H) size
mm inches mm inches TS
HLX1041025B 45.00 x 10.40 1.800 x 0.400 25.00 x 10.40 1.000 x 0.400 1000
HLX1041033B 52.00 x 10.40 2.100 x 0.400 33.00 x 10.40 1.300 x 0.400 1000
HLX1041038B 58.00 x 10.40 2.300 x 0.400 38.00 x 10.40 1.500 x 0.400 1000
HLX1041050B 70.00 x 10.40 2.750 x 0.400 50.00 x 10.40 2.000 x 0.400 1000
HLX1041070B 90.00 x 10.40 3.500 x 0.400 70.00 x 10.40 2.750 x 0.400 1000
HLX1501025B 45.00 x 15.00 1.800 x 0.600 25.00 x 15.00 1.000 x 0.600 500
HLX1501033B 52.00 x 15.00 2.100 x 0.600 33.00 x 15.00 1.300 x 0.600 500
HLX1501038B 58.00 x 15.00 2.300 x 0.600 38.00 x 15.00 1.500 x 0.600 500
HLX1501050B 70.00 x 15.00 2.750 x 0.600 50.00 x 15.00 2.000 x 0.600 500
HLX1501070B 90.00 x 15.00 3.500 x 0.600 70.00 x 15.00 2.750 x 0.600 500
HLX2031025B 45.00 x 20.30 1.800 x 0.800 25.00 x 20.30 1.000 x 0.800 500
HLX2031033B 52.00 x 20.30 2.100 x 0.800 33.00 x 20.30 1.300 x 0.800 500
HLX2031038B 58.00 x 20.30 2.300 x 0.800 38.00 x 20.30 1.500 x 0.800 500
HLX2031050B 70.00 x 20.30 2.750 x 0.800 50.00 x 20.30 2.000 x 0.800 500
HLX2031070B 90.00 x 20.30 3.500 x 0.800 70.00 x 20.30 2.750 x 0.800 500
HLX2531025B 45.00 x 25.30 1.800 x 1.000 25.00 x 25.30 1.000 x 1.000 250
HLX2531033B 52.00 x 25.30 2.100 x 1.000 33.00 x 25.30 1.300 x 1.000 250
HLX2531038B 58.00 x 25.30 2.300 x 1.000 38.00 x 25.30 1.500 x 1.000 250
HLX2531050B 70.00 x 25.30 2.750 x 1.000 50.00 x 25.30 2.000 x 1.000 250
HLX2531070B 90.00 x 25.30 3.500 x 1.000 70.00 x 25.30 2.750 x 1.000 250
Options
Prescoring Not available on these products – this should always be 1.
Package sizes Standard B
Colors Standard White Yellow
Code WE YW
Nonstandard Red Blue
Code RD BE
Format TS – Thermal transfer (reel/single sided)
Printable width on marker 025 25mm (1”)
033 33mm (1.3”)
038 38mm (1.5”)
050 50mm (2”)
070 70mm (2.75”)
Ordering information: Specify product name, marker height, color, scoring option (always 1), format, printable width, and pack size.
Ordering example: HLX150YW1TS033B
25
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HLX-NEL Narrow Edge Leading Low fire hazard tie-on cable marker tags
HLX cable markers assembled in a Narrow Edge Leading (NEL)
format for use in the T212M printer. Ideal for use in applications
where the volume is small or wiring complexity is simple.
These markers are manufactured from the same low fire hazard
material as the standard HLX markers making them ideal in
applications where low smoke, low toxicity and zero halogen are
critical.
These markers are attached to cables, bundles, and larger wire by
cable ties.
Features and benefits
�
Recommended for use where combustion of products may
endanger personnel or delicate electronics
�
Ideal for low volume applications with T212M printer
�
Two formats available
�
Same material and approvals as standard HLX cable markers
�
Ideal for pre or post termination assembly
Temperature rating
Operating temperature range –40°C to +105°C –40°F to +221°F
Specifications/approvals
Tyco Electronics RW 2529
TTDS-134
Industry UL 224 (clause 14)
BS 4G 198 Part 3
ASTM D 2671
SAE AS81531 4.6.2
MIL-STD-202 Method 215K
Printer information
Tyco Electronics printer T212M (thermal transfer only)
Tyco Electronics ribbon 1966-RIBBON-4T200
Part numbering system
HLX 125 YW 2 NEL 60 S
Pack size
Printable width (mm)
Format
Number of markers across width
Color
Marker height (mm)
Product family
26
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HLX-NEL Narrow Edge Leading Low fire hazard tie-on cable marker tags (Cont’d)
Ordering information
Available sizes and formats
Ordering Marker dimensions Printable area Number of
description (W x H) (W x H) Markers Across
mm inches mm inches
HLX1254NEL60S 80.00 x 12.50 3.15 x 0.49 60.00 x 10.50 12.35 x 0.40 4
HLX1252NEL60S 80.00 x 12.50 3.15 x 0.49 60.00 x 10.50 12.35 x 0.40 2
Options
Package sizes Standard S
Colors Standard White Yellow
Colors WE YW
Format NEL - Narrow edge leading
27
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HL Flame retardant tie-on cable marker tags
Used to identify large cables and bundles either pre or post-
termination, these flame retardant HL cable markers are suitable
for use in environments with temperatures of –55°C to +135°C
(–67°F to +275°F). The markers are easily applied with standard
cable ties.
HL markers are presented as organized markers assembled onto
either a fanfolded or reeled paper carrier for ease of selection and
kitting and are available in an extensive range of sizes.
They are available with the surface designed for either dot matrix
or thermal transfer printers.
Features and benefits
�
Recommended for use where de-termination of wires is not
possible for large ID wires or wire bundles
�
Heat resistant to +175°C for 168 hours or +250°C for 4 hours
with no deterioration in properties
�
Several printable widths and heights available
�
Non-standard color options available
Temperature rating
Operating temperature range –55°C to +135°C –67°F to +275°F
Specifications/approvals
Tyco Electronics TTDS-037
Military SAE AS81531 4.6.2
MIL-STD-202 Method 215J
Industry ASTM D 2671
Printer information
Tyco Electronics printer AM 6310 (dot matrix)
T312M (thermal transfer)
Tyco Electronics ribbon 1892BK04 (dot matrix)
1892BK03 (dot matrix —
high performance)
TMS-RJS-RIBBON-4RPSCE
Part numbering system
HL 150 YW 1 NF 033 B
Pack size
Printable width (mm)
Format
Scoring
Color
Marker height
Product family
28
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
HL Flame retardant tie-on cable marker tags
Ordering information
WEB WIDTH
WIDTH
HEIGHT
Available sizes and formats
Ordering Marker dimensions Printable area Pack size
description (W x H) (W x H)
mm inches mm inches NF TS
HL1041025B 45.00 x 10.40 1.800 x 0.400 25.00 x 10.40 1.000 x 0.400 550 1000
HL1041033B 52.00 x 10.40 2.100 x 0.400 33.00 x 10.40 1.300 x 0.400 550 1000
HL1041038B 58.00 x 10.40 2.300 x 0.400 38.00 x 10.40 1.500 x 0.400 550 1000
HL1041050B 70.00 x 10.40 2.750 x 0.400 50.00 x 10.40 2.000 x 0.400 550 1000
HL1041070B 90.00 x 10.40 3.500 x 0.400 70.00 x 10.40 2.750 x 0.400 550 1000
HL1501025B 45.00 x 15.00 1.800 x 0.600 25.00 x 15.00 1.000 x 0.600 550 500
HL1501033B 52.00 x 15.00 2.100 x 0.600 33.00 x 15.00 1.300 x 0.600 550 500
HL1501038B 58.00 x 15.00 2.300 x 0.600 38.00 x 15.00 1.500 x 0.600 550 500
HL1501050B 70.00 x 15.00 2.750 x 0.600 50.00 x 15.00 2.000 x 0.600 550 500
HL1501070B 90.00 x 15.00 3.500 x 0.600 70.00 x 15.00 2.750 x 0.600 550 500
HL2031025B 45.00 x 20.30 1.800 x 0.800 25.00 x 20.30 1.000 x 0.800 550 500
HL2031033B 52.00 x 20.30 2.100 x 0.800 33.00 x 20.30 1.300 x 0.800 550 500
HL2031038B 58.00 x 20.30 2.300 x 0.800 38.00 x 20.30 1.500 x 0.800 550 500
HL2031050B 70.00 x 20.30 2.750 x 0.800 50.00 x 20.30 2.000 x 0.800 550 500
HL2031070B 90.00 x 20.30 3.500 x 0.800 70.00 x 20.30 2.750 x 0.800 550 500
HL2531025B 45.00 x 25.30 1.800 x 1.000 25.00 x 25.30 1.000 x 1.000 300 250
HL2531033B 52.00 x 25.30 2.100 x 1.000 33.00 x 25.30 1.300 x 1.000 300 250
HL2531038B 58.00 x 25.30 2.300 x 1.000 38.00 x 25.30 1.500 x 1.000 300 250
HL2531050B 70.00 x 25.30 2.750 x 1.000 50.00 x 25.30 2.000 x 1.000 300 250
HL2531070B 90.00 x 25.30 3.500 x 1.000 70.00 x 25.30 2.750 x 1.000 300 250
Options
Prescoring Not available on these products – this should always be 1.
Package sizes Standard B
Colors Standard White Yellow
Code WE YW
Nonstandard Red Blue
Code RD BE
Format NF – Dot matrix printing (fanfold/single sided)
TS – Thermal transfer (reel/single sided)
Printable Width On Marker 025 25mm (1”)
033 33mm (1.3”)
038 38mm (1.5”)
050 50mm (2”)
070 70mm (2.75”)
Ordering information: Specify product name, marker height, color, scoring option (always 1), format, printable width, and pack size.
Ordering example: HL150YW1NF033B
29
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
NMX Flame retardant, light weight tie-on cable marker tags
NMX cable marker tags are used for identification of cables and
wire bundles by computer-based printing onto markers. The
markers are attached using cable ties. They are ideal for aerospace
and other cases where resistance to harsh environments and light
weight are important.
Features and benefits
�
Extremely light weight
�
Ultimate tensile strength and tear resistance
�
Flame retardant
�
Resistant to several avionics fluids, solvents and cleaners
�
Dot matrix printable
�
Available in white and yellow printable areas
Temperature rating
Operating temperature range –40°C to +135°C –40°F to +275°F
Specifications/approvals
Tyco Electronics TTDS-030
Military SAE AS81531 4.6.2,
MIL-STD-202 Method 215J
Industry DMS 2325, DMS 2409
Printer information
Tyco Electronics printer AM6310 (dot matrix)
Tyco Electronics ribbon 1892 BK01 (dot matrix)
Part numbering system
NMX 25625 WE 2.5
Pack size
Color
Product size
Product family
30
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
NMX Flame retardant, light weight tie on cable marker tags
Ordering information
3.500
2.500
0.625
Available sizes and formats
Ordering description Label width Label height Printable width Weight
mm inches mm inches mm inches (g/10 pcs.)
NMX256252.5 63.50 2.500 15.87 0.625 50.80 2.000 2.5
Options
Package sizes Standard 2500 pieces per pack
Nonstandard Larger pack sizes are available. Please contact Tyco Electronics.
Colors White Yellow
WE YE
Ordering information: Specify product name, product size, color and pack size.
Ordering example: NMX25625WE2.5
31
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
MultiMark Strip and Carriers insert marker for post termination identification
MultiMark is comprised of a polyolefin printed strip, which is
inserted into a protective PVC carrier. The carrier can be applied to
wires or cables pre-termination to allow post termination printed
strip insertion or the strips can be replaced post termination when
re-labeling is required.
The PVC carrier protects the markers from dust and grime. These
carriers are available in a number of sizes to cover a wide range of
cable diameters.
The printable strips are presented as organized markers
assembled onto fanfolded paper carrier for ease of selection and
kitting. The strips are available in a variety of lengths.
Available for printing by dot matrix only.
Features and benefits
�
Suitable for post termination labeling and re-labeling
�
Marker lengths 10mm to 30mm
�
Clear carriers to fit cable diameters 1.8mm to 8.0mm
Temperature rating
Operating temperature range –45°C to +70°C –49°F to 158°F
Specifications/approvals
Tyco Electronics TTDS-003
Military MIL-STD 202 method 215J
SAE-AS81531 4.6.2
Printer information
Tyco Electronics Printer AM6310 (dot matrix)
Tyco Electronics Ribbon 1892BK04 (dot matrix)
Part numbering system
082 5 99 19A
Size (pack quantity and length)
Color
Format Number (height)
Material Type
32
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
MultiMark Strip and Carriers insert marker for post termination identification
Ordering Information
Type Format Number Color Size Pack Qty Marker length
082 = Polyolefin Label 5 = height 4mm 99 = White 01A 880 pcs. 15.0mm
MultiMark 94 = Yellow 03A 880 pcs. 30.0mm
05A 792 pcs. 10.0mm
.
02A 1760 pcs. 15.0mm
04A 1760 pcs. 30.0mm
06A 1848 pcs. 10.0mm
17A 1320 pcs. 20.0mm
18A 2640 pcs. 20.0mm
19A 3520 pcs. 15.0mm
Legends
Order Code Marker Length Marker Height Pack Quantity Color
mm inches mm inches
08259905A 10.2 0.4 4 0.16 792 White
08259906A 10.2 0.4 4 0.16 1848 White
08259901A 15.2 0.6 4 0.16 880 White
08259902A 15.2 0.6 4 0.16 1760 White
08259919A 15.2 0.6 4 0.16 3520 White
08259917A 20.2 0.8 4 0.16 1320 White
08259918A 20.2 0.8 4 0.16 2640 White
08259903A 30.2 1.2 4 0.16 880 White
08259904A 30.2 1.2 4 0.16 1760 White
08259405A 10.2 0.4 4 0.16 792 Yellow
08259406A 10.2 0.4 4 0.16 1848 Yellow
08259401A 15.2 0.6 4 0.16 880 Yellow
08259402A 15.2 0.6 4 0.16 1760 Yellow
08259419A 15.2 0.6 4 0.16 3520 Yellow
08259417A 20.2 0.8 4 0.16 1320 Yellow
08259418A 20.2 0.8 4 0.16 2640 Yellow
08259403A 30.2 1.2 4 0.16 880 Yellow
08259404A 30.2 1.2 4 0.16 1760 Yellow
Carriers
2
Order Code For Cable Diameter (mm) For Cable Size (mm ) Carrier Size Carrier Length Pack Quantity
0825001 1.8 - 4.0 0.5 - 1.5 0 ----- 50m coil
0825016 1.8 - 4.0 0.5 - 1.5 0 16 1200 pcs
0825032 1.8 - 4.0 0.5 - 1.5 0 32 600 pcs
0825201 2.6 - 6.0 1.5 - 6.0 2 ----- 30m coil
0825216 2.6 - 6.0 1.5 - 6.0 2 16 800 pcs
0825232 2.6 - 6.0 1.5 - 6.0 2 32 400 pcs
0825416 5.2 - 8.0 4.0 - 16.0 4 16 400 pcs
0825432 5.2 - 8.0 4.0 - 16.0 4 32 200 pcs
33
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
iMC Laser or hand writable marking clip
Tyco Electronics iMC are marking clips designed for the identifica-
tion of wires and can be permanently attached to wires, post
termination.
They can be quickly and simply clipped on the wire or cable. The
polyester insert strip which can be printed using a laser printer or
written by hand is then inserted in the clip.
The marking clips are fastened without the need of cable ties.
Features and benefits
�
Protects against damp, dust and dirt
�
iMC polyester strip can be marked with a laser printer or
by hand
�
Quick and flexible
�
iMC strip is a dual color label with white on one side and
yellow on the other
Temperature rating
Operating temperature 0° to +80°C (+32° to +176°F)
Printer Information
Standard laser printer with auto/manual sheet feed
Contact Tyco Electronics Electronics Identification for more information.
34
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
iMC Laser or hand writable marking clip
Ordering Information
Marker Clips
Ordering Clips Recommended Use Typical Cross Dimensions
2
Description per pack Range mm (inches) Section mm Length x Width mm (inches)
iMC02 500 0.75 - 2.00 (0.03 - 0.08) 0.20 - 0.75 15 x 7.8 (0.59 - 0.31)
iMC04 500 1.75 - 3.25 (0.07 - 0.13) 0.50 - 1.50 15 x 7.8 (0.59 - 0.31)
iMC06 500 3.00 - 4.50 (0.12 - 0.18) 1.50 - 6.00 15 x 9.5 (0.59 - 0.37)
iMC08 500 4.25 - 6.00 (0.17 - 0.24) 6.00 - 10.00 15 x 9.5 (0.59 - 0.37)
Legend Strips (A4 Sheets)
Ordering Labels Color Label Size
Description per sheet Height x Width mm (inches)
iMCA4ES-4/9 560 1 side White/1 side Yellow 6.4 x 12.2 (0.25 x 0.48)
35
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
iKC/iKB Laser or hand writable cable clip
Tyco Electronics iKC/iKB are cable clips designed for the identifica-
tion of wires and cables in rough, damp and dusty environments.
The legend strip (iKB) with the printable information is embedded
in the cable clip (iKC) and therefore has all- round protection.
The cable clips are fastened on using cable ties.
.
Features and benefits
�
Protects against damp, dust and dirt
�
iKB legend strip marked with a laser printer or by hand
�
Universal application on various cable diameters
�
iKB legend strip is a dual color label with white on one side
and yellow on the other
Temperature rating
Operating temperature -26°C to +130°C (-15°F to +266°F)
Printer Information
Standard laser printer with auto/manual sheet feed
Contact Tyco Electronics Electronics Identification for more information.
36
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Heat-Shrink/Cable Markers
iKC/iKB Laser or hand writable cable clip
Ordering Information
Cable Clips iKC
Ordering Clips Dimensions
Description per pack L x W mm (inches)
iKC01 25 44 x 21 (1.73 - 0.83)
iKC02 25 34 x10.5 (1.34 - 0.41)
iKC03 25 68 x 10.5 (2.68 x - 0.41)
Ordering Information
Legend Strips iKB (A4 Sheets)
Ordering Labels Color Label Size
Description per sheet H x W mm (inches)
iKB01P-9/4 60 1 side White 16 x 40 (0.63 x 1.57)
1 side Yellow
iKB02P-9/4 240 1 side White 6.2 x 30 (0.24 x 0.41)
1 side Yellow
iKB03P-9/4 120 1 side White 6.2 x 64 (0.24 x 0.41)
1 side Yellow
37
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Heat Shrink/Cable Markers
Wire and Harness ID Products
Performance Labels
VF/NPVF/VF-130 Tedlar® color coding tape and labels
This polyvinyl fluoride material is designed for use as a wire/cable
marker, label and wrap-around in the general aviation industry.
The product is ideal for a variety of harsh chemical environments
and where non-igniting/self-extinguishing properties are a
necessity. It is available in several application-defined types and
sizes and can be used with various printing technologies.
VF series
®
The VF series of Tedlar products is specifically designed for
wire/cable labeling. The product is dot matrix or thermal transfer
printable and is available in several continuous and die-cut formats
to fit a wide range of cables/cable bundles. The product meets all
the requirements of the BMS 13-47, DMS 2359 and GAT100BA
specifications, the benchmarks for pressure-sensitive wrap-around
labels in the aerospace industry.
NPVF Series
®
The NPVF Tedlar is a non-printable, 12.7mm (0.5”) wide
Temperature rating
and 30.48m (100’) long continuous tape designed for use
as a color-coded identifier for cables/cable bundles. Operating temperature range
Besides identifying the bundle this product is wrapped
VF and NPVF –40°C to +130°C –40°F to +266°F
around, it also provides strength and rigidity to the bundle.
VF-130 –40°C to +105°C –40°F to +221°F
®
The product has all the features of the VF series of Tedlar
VF-130 -40°C to 105°C -40°F to 221°F
products except for printability.
Specifications/approvals
VF-130 Series Tyco Electronics TTDS-005 (TTVF/DMVF)
®
The VF-130 series is a range of clear non-printable Tedlar TTDS-004 (NPVF)
tapes designed for use as an over laminate on wires/bundle Military MIL-M-87958
DMS 2359
identifiers where additional UV protection is required. These
tapes can be used over various types of identifiers like wrap Industry BMS-13-47
BACT 19
around labels, heat-shrink labels, tie-on cable labels and
GAT100BA
pressure-sensitive markers.
Printer information
Features and benefits
Tyco Electronics printer AM6310 (dot matrix)
�
Resists water, oil, conventional cleaning agents,
T308S* (thermal transfer)
and oil based solvents
*Size dependent. Contact Tyco
Electronics.
�
Filters UV light
Tyco Electronics ribbon 1892BK01 (dot matrix)
1330-3300-10* (thermal transfer)
�
Exhibits high degree of resistance to aging
* Alternative printers and ribbons are available
�
Meets the requirements of MIL-M-87958 for special applications. Contact Tyco
Electronics Electronics Identification for more
�
Available in several colors to facilitate color-coding
information.
and clear for over laminating
Part numbering system (Continuous)
TTVF 200 YW-100
Length (feet)
Color
Width (inches)
Product family
Part numbering system (Die-Cut)
TTVF 6004 GN 2.5
Pack size
Color
Label size (W x H)
Product family
38
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Labels
Wire and Harness ID Products
Performance Labels
VF/NPVF/VF-130 Tedlar® color coding tape and labels
Ordering information
Continuous Die-Cut NPVF
LABEL WIDTH
ROLL WIDTH
®
Polyvinyl Fluoride VF Tedlar – Continuous Labels
Ordering Printer Label width Label length Quantity
description type mm inches Meters Feet per pack
VF050 -180 DM/TT 12.70 0.500 54.86 180 Continuous
VF075 -100 DM/TT 19.05 0.750 30.48 100 Continuous
VF100 -100 DM/TT 25.40 1.000 30.48 100 Continuous
VF150 -100 DM/TT 38.10 1.500 30.48 100 Continuous
VF200 -100 DM/TT 50.80 2.000 30.48 100 Continuous
VF300 -100 DM/TT 76.20 3.000 30.48 100 Continuous
VF400 -100 DM/TT 101.60 4.000 30.48 100 Continuous
®
Polyvinyl Fluoride VF Tedlar – Die-Cut Labels
Ordering Printer Label width Label height Quantity
description type mm inches mm inches per pack
VF10292.5 DM/TT 25.40 1.000 73.66 2.900 2500
VF10791 DM/TT 25.40 1.000 200.66 7.900 1000
VF15292.5 DM/TT 38.10 1.500 73.66 2.900 2500
VF16791 DM/TT 40.64 1.600 200.66 7.900 1000
VF30151 DM/TT 76.20 3.000 38.10 1.500 1000
VF35092.5 DM/TT 88.90 3.500 22.86 0.900 2500
VF60042.5 DM/TT 152.40 6.000 10.16 0.400 2500
Options
Format (TT) Thermal transfer printable
(DM) Dot matrix printable
Colors Yellow White Red Blue Green Violet Pink
Code YW WE RD BE GN VT PK
®
Polyvinyl Fluoride NPVF Tedlar – Color coding tape
Ordering Printer Roll width Label length Quantity
description type mm inches Meters Feet per pack
NPVF050XX-100 N/A 12.70 0.500 30.48 100 Continuous
Options
Colors Yellow White Red Blue Green Violet Pink Black Brown Orange Grey Gold
Code YW WE RD BE GN VT PK BK BN OE GY GD
®
Polyvinyl Fluoride VF-130 Tedlar – Over laminate tapes
Ordering Printer Label width Label length Quantity
description type Color mm inches Meters Feet per pack
NPVF150CL -100 N/A Clear 38.10 1.500 30.48 100 Continuous
NPVF200CL-100 N/A Clear 50.80 2.000 30.48 100 Continuous
NPVF300CL-100 N/A Clear 76.20 3.000 30.48 100 Continuous
NPVF400CL -100 N/A Clear 101.60 4.000 30.48 100 Continuous
39
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Labels
Wire and Harness ID Products
Performance Labels
RMK-6 Computer printable epoxy coated labels
RMK-6 is a computer printable labelstock with outstanding fluid
and abrasion resistance, designed to be printed by impact dot
matrix printers. When heat-cured after printing, its unique heat
reactive epoxy surface “locks in” the image to combine the
versatility and convenience of on-site printing with performance to
meet the toughest conditions. A high performance acrylic
adhesive ensures simple installation while maintaining excellent
adhesion.
Typical applications are rating plate labels, component
identification, and pipe and cable wraparound markers. Outdoor
use is not recommended.
Features and benefits
�
Printable by dot matrix printers
�
Excellent fluid and abrasion resistance without an overlay
�
High performance acrylic adhesive
�
Low fire hazard properties
�
Indoor use only
Temperature rating
Operating temperature range
Wiring marking –40°C to +85°C
–40°F to +185°F
Panel marking –40°C to +105°C
–40°F to +221°F
Excursion temperature +200°C for 2 hours
Storage conditions Unopened 12 months at temperatures not exceed-
ing +35°C (+95°F).
Opened 6 months at temperatures not exceed-
ing +25°C (+77°F)
and 80% relative humidity
Curing 4 - 6 minutes at 160°C
in an air circulating oven.
Specifications/approvals
Tyco Electronics RW 2520
TTDS-032
Industry UL MH17259 Group PGGU2
Printer information
Tyco Electronics printer AM6310 (dot matrix)
Tyco Electronics ribbon 1892BK04 (dot matrix)
Part numbering system
RMK6 8.5
Label height (mm)
Product family
40
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Labels
Wire and Harness ID Products
Performance Labels
RMK-6 Computer printable epoxy coated labels
Ordering information
Matrix removed
12.7
W
127–0.1
H
(per 10 pitches)
4.0 Dia. hole
9–1
59.8–1
65–1
RayMark coating
Pressure sensitive
0.16 Nom.
acrylic adhesive
White polyester film
Release paper
carrier
Available sizes and formats
Ordering Label Label Package
description height width quantity
mm mm Labels per pack
RMK6-4.2 4.20 50.80 10000
RMK6-8.5 8.50 50.80 5000
RMK6-12.7 12.70 50.80 3000
RMK6-17.0 17.00 50.80 2500
RMK6-25.4 25.40 50.80 1500
RMK6-55.0 55.00 50.80 750
RMK6-WM* * 50.80 *
*An uncut version for wraparound markers. Spool length = 40 meters.
Options
Colors Standard White
41
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Labels
Wire and Harness ID Products
Performance Labels
RMK Computer printable epoxy coated labels in a sheet form
RMK is a computer printable labelstock with outstanding fluid and
abrasion resistance, designed to be printed by sheet fed inkjet
printers. When heat-cured after printing its unique heat reactive
epoxy surface “locks in” the image to combine the versatility and
convenience of on-site printing with performance to meet the
toughest conditions. A high performance acrylic adhesive ensures
simple installation while maintaining excellent adhesion. A wide
range of label sizes are available, supplied in A4 sheets for feeding
through standard inkjet printers.
Typical applications are replacement of engraved metal or plastic
labels, signs, rating plate labels, and color coding.
Features and benefits
�
High performance label material
�
High performance acrylic adhesive
�
A4 format sheet
Temperature rating
�
Printable by color inkjet printers with sheet feed
Operating temperature range
�
Outstanding fluid and abrasion resistance without an overlay
Wiring marking –40°C to +85°C –40°F to +185°F
�
Low fire hazard properties
Panel marking –40°C to +105°C –40°F to +221°F
�
Indoor use only Excursion temperature +200°C for 2 hours
Storage conditions Unopened 12 months at temperatures not exceeding
+35°C (+95°F)
Opened 6 months at temperatures not exceeding
+25°C (+77°F)
and 80% relative humidity
Curing 4 - 6 minutes at 160°C
in an air circulating oven.
Specifications/approvals
Tyco Electronics RW 2518
Industry UL MH17259 Group PGGU2
Printer information
Various color inkjet printers can be used depending on the application, mainly HP800
or HP900 series if available.
Tyco Electronics recommended printer Epson R340/R320
Tyco Electronics recommended inks Standard Epson
For further advice on possible alternative printers, contact Tyco Electronics.
Part numbering system
RMK-18x35- A4
Sheet size
Label size (mm)
Product family
42
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Labels
Wire and Harness ID Products
Performance Labels
RMK Computer printable epoxy coated labels in a sheet form
Ordering information
210 mm
W
297 mm
H
r
188 mm
r = 1 mm to 3 mm
usable
(size dependent)
A4 sheet dimensions Label dimensions
Available sizes and formats
Ordering Label Label Labels
description height width per sheet
mm mm
RMK-6x20-A4 6 20 224
RMK-9x25-A4 9 25 132
RMK-10x19-A4 10 19 160
RMK-11x40-A4 11 40 72
RMK-18x20-A4 18 20 96
RMK-18x25-A4 18 25 72
RMK-18x35-A4 18 35 48
RMK-18x50-A4 18 50 36
RMK-25x30-A4 25 30 45
RMK-25x35-A4 25 35 36
RMK-25x50-A4 25 50 27
RMK-25x70-A4 25 70 10
RMK-25x75-A4 25 75 18
RMK-25x100-A4 25 100 10
RMK-28x40-A4 28 40 32
RMK-30x13-A4 30 13 88
RMK-30x25-A4 30 25 48
RMK-30x70-A4 30 70 14
RMK-35x75-A4 35 75 12
RMK-50x13-A4 50 13 50
RMK-50x25-A4 50 25 30
RMK-50x100-A4 50 100 5
RMK-75x150-A4 75 150 3
RMK-87x13-A4 87 13 33
RMK-87x25-A4 87 25 18
RMK-150x150-A4 150 150 1
RMK-170x13-A4 170 13 11
RMK-170x25-A4 170 25 6
RMK-190x30-A4 190 30 5
RMK-200x13-A4 200 13 10
RMK-250x13-A4 250 13 11
RMK-250x25-A4 250 25 6
RMK-UNCUT-A4Uncut 50 sheets
43
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Labels
Wire and Harness ID Products
Performance Labels
TTP Continuous polyester for decals
The system is designed for applications that require a high-
durability label with all the features of a “silk-screened” label, only
without the cost, time and inflexibility involved in obtaining a
silk-screened product. The product utilizes high performance
polyester with permanent acrylic adhesive. It is thermal transfer
printable with all the capabilities of graphics, barcodes, logos and
several fonts. The product is available in several colors although
white, clear and metalized silver are available as standard. Typical
applications include panel labels, fascias, decalcomanias and asset
identification and rating plates. Typical industry use includes
aerospace, defense, electronics and infrastructure.
Features and benefits
�
Efficient solution for expensive silk-screen printing
�
Available in continuous format
�
Several widths and colors available
Temperature rating
�
Interior and exterior aircraft use including flight
Operating temperature range
entertainment and deck instrumentation
Clear, White -40°C to +150°C -40°F to +302°F
Metalized, and colors
�
Thermal transfer printable
�
Printable in any combination of material and ribbon colors
Specifications/approvals
Tyco Electronics TTDS- 031
Military A-A-59485 (accelerated weather
resistance and salt spray)
Industry GAT 100BB
UL 17292 Group PGJI2 (polywhite)
Printer information
Tyco Electronics printer T312S (thermal transfer)
Tyco Electronics ribbon 1330-0607-10 (thermal transfer)
Part numbering system
TTP 200 CL-10
Length
Color
Label width (inches)
Product name
44
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Labels
Wire and Harness ID Products
Performance Labels
TTP Continuous polyester for decals
Ordering information
LABEL WIDTH
Available sizes and formats
Ordering Label Roll Quantity
description width length per pack
mm inches meters feet
TTP200-10 50.80 2.000 30.48 100 Continuous
TTP300-10 76.20 3.000 30.48 100 Continuous
TTP400-10 101.60 4.000 30.48 100 Continuous
TTP600-10 152.40 6.000 30.48 100 Continuous
Note: Use TTPA prefix for high tack adhesive
Options
Colors Standard Clear White Metalized silver
Code CL WE MP
Colors Non Standard Red Green Blue Orange
Code RD GN BE OE
Colors Non Standard Black Yellow
Code BK YW
Ordering example: TTP400WE-10 or TTPA400WE (for the high tack adhesive variant)
45
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Labels
Wire and Harness ID Products
Performance Labels
HPK Thermal transfer printable panel labels
Tyco Electronics HPK is a semi-rigid, heavy gauge polypropylene
film with a permanent acrylic adhesive, designed to permanently
identify control panel components and racks, as well as general
labeling applications that require a high performance heavy gauge
material. They offer excellent abrasion resistance, and adhere to
most smooth surfaces including bare and painted metal.
For reliable print performance and durability, use with Tyco
Electronics 1330-0607 ribbon.
Features and benefits
�
Self-adhesive backing for quick and easy fixing
�
Thermal transfer printable
�
Recommended for indoor use
�
Resistant to common fluids, lubricants and solvents
Temperature rating
Operating temperature range –29°C to +80°C –20°F to +176°F
Minimum recovery temperature 10°C +50°F
Specifications/approvals
Tyco Electronics TTDS- 008
Printer information
Tyco Electronics printer T308S (thermal transfer)
Tyco Electronics ribbon 1330-0607-10 (thermal transfer)
Part numbering system
HPK 02 WE 1 050
Label width (mm)
Scoring (optional)
Color
Label height
Product family
46 46
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Labels
Wire and Harness ID Products
Performance Labels
HPK Thermal transfer printable panel labels
Ordering information
Available sizes and formats
Ordering Labels (A) Label (B) Label (C) Vertical (D) Web
description across width height repeat width
mm inches mm inches mm inches mm inches
HPK02WE1050 1 50.80 2.000 5.10 0.200 8.30 0.325 57.20 2.250
HPK04WE1050 1 50.80 2.000 10.20 0.400 13.30 0.525 57.20 2.250
HPK06WE1050 1 50.80 2.000 15.20 0.600 18.40 0.725 57.20 2.250
HPK08WE1050 1 50.80 2.000 20.30 0.800 23.50 0.925 57.20 2.250
HPK10WE1050 1 50.80 2.000 25.40 1.000 28.60 1.125 57.20 2.250
Options
Prescoring Perforated score to produce multiple labels from each HPK label.
Number of prescores 0 prescores 1 prescore
Code 1 2
Package size Standard 1000 piece pack
Color Standard White
Ordering information: Specify product name, product size and prescores.
Ordering example: HPK02WE1050
47
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Labels
Wire and Harness ID Products
Self-Laminating Labels
SB Thermal transfer printable self-laminating labels
Tyco Electronics SB is a thermal transfer printable, translucent
vinyl film with a permanent acrylic adhesive, supplied with a white
printable area, which is over-laminated upon application with the
translucent portion of the label. This ‘self-laminating’ feature
protects the printed area from exposure to oil, solvents, water and
abrasion. SB labels offer excellent conformability to round,
irregular or flexible surfaces. Ideal for wire and cable identification,
including flat ribbon cables that are subject to repeated bending,
they are UL Listed. For reliable print performance and durability,
use with Tyco Electronics TMS-RJS-RIBBON-4RPSCE series ribbon.
Features and benefits
�
Manufactured with a white coated area for
printing, and with a clear tail to wind around a wire
or cable over the printed surface to seal out impurities
that would cause the label to become illegible
�
Protects printed information from chemicals and frequent
handling
�
Designed to withstand exposure to oil, solvents, and water
Temperature rating
Operating temperature range –40°C to +80°C –40°F to +176°F
Specifications/approvals
Tyco Electronics TTDS- 052
Industry UL MH17001 (Group PGDQ2)
MH17292 (Group PGJI2)
Printer information
Tyco Electronics printer T308S*
(thermal transfer)
Tyco Electronics ribbon TMS-RJS-RIBBON-4RPSCE*
(thermal transfer)
* Alternative printers and ribbons are available
for special applications. Contact Tyco
Electronics Identification for more
information.
Part numbering system
SB 100 225 WE 5
Pack size
Color
Label length
Label width
Product family
48
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
SB Thermal transfer printable self-laminating labels
Ordering information
Available sizes and formats
Ordering Package Labels Max.Cable (A) Label (B) Label (C) Printable (D) Horizontal (E) Vertical (F) Web
description quantityacross OD height repeat repeat width
mm inches mm inches mm inches mm inches mm inches mm inches mm inches
SB050100WE10 10,000 5 5.1 .20 12.70 0.500 25.40 1.000 8.50 0.330 16.80 0.600 31.00 1.222 86.00 3.384
SB050143WE10 10,000 5 7.6 .30 12.70 0.500 36.50 1.437 12.70 0.500 16.80 0.662 42.20 1.661 86.00 3.384
SB075094WE10 10,000 4 7.6 .30 19.10 0.750 23.90 0.940 9.50 0.375 20.30 0.800 28.60 1.125 85.10 3.350
SB080150WE10 10,000 4 7.6 .30 20.30 0.800 38.10 1.500 12.70 0.500 22.90 0.900 44.50 1.750 94.90 3.736
SB100143WE5 5,000 3 7.6 .30 25.40 1.000 36.50 1.437 12.70 0.500 27.90 1.100 42.20 1.661 87.30 3.436
SB100225WE5 5,000 3 12.2 .48 25.40 1.000 57.20 2.250 19.10 0.750 27.90 1.100 66.70 2.625 87.30 3.436
SB100375WE2.5 2,500 3 22.4 .88 25.40 1.000 95.30 3.750 25.40 1.000 27.90 1.100 101.60 4.000 87.30 3.436
SBH100375WE2.5 2,500 1* 22.4 .88 25.40 1.000 95.30 3.750 25.40 1.000 N/A N/A 28.60 1.125 100.30 3.950
SB100594WE1 1,000 3 35.6 1.4 25.40 1.000 151.00 5.940 38.10 1.500 27.90 1.100 158.80 6.250 87.30 3.436
SB100743WE1 1,000 3 35.6 1.4 25.40 1.000 188.90 7.437 38.10 1.500 27.90 1.100 195.30 7.688 87.30 3.436
SB190319WE2.5 2,500 2 12.2 .48 48.30 1.900 81.00 3.190 19.10 0.750 50.80 2.000 87.40 3.440 105.10 4.138
SB190594WE1 1,000 2 35.6 1.4 48.30 1.900 151.00 5.940 38.10 1.500 50.80 2.000 158.80 6.250 105.10 4.138
SB200143WE2.5 2,500 2 7.6 .30 50.80 2.000 36.50 1.437 12.70 0.500 50.80 2.000 42.20 1.661 107.60 4.236
SB200225WE2.5 2,500 2 12.2 .48 50.80 2.000 57.20 2.250 19.10 0.750 50.80 2.000 66.70 2.625 107.60 4.236
SB200375WE2.5 2,500 2 22.4 .88 50.80 2.000 95.30 3.750 25.40 1.000 53.30 2.100 101.60 4.000 111.40 4.386
SB200743WE1 1,000 2 48.3 1.9 50.80 2.000 188.90 7.437 38.10 1.500 53.30 2.100 195.30 7.688 110.10 4.336
*One label across rotated format.
Options
Colors Standard White with clear tail
Non-Standard Red, Orange, Yellow, Green, Blue, Violet, with clear tail
49
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
SP Self-laminating polyester labels
Tyco Electronics "SP" is a thermal transfer printable, low profile
translucent polyester film with a permanent acrylic adhesive.
Supplied with a white printable area, which is over-laminated upon
application with the translucent portion of the label. This
'self-laminating' feature better protects the printed area from
exposure to oil, solvents, water and abrasion. Excellent
conformability to round, irregular or flexible surfaces. Ideal for wire
& cable identification, including flat ribbon cables that are subject
to repeated bending. For reliable print performance and durability,
use with Tyco Electronics 1330-0607 ribbon.
Features and benefits
�
Self laminating feature for protection and mark
permanence of the printed area of the label
�
Designed to better withstand exposure to oil, solvents,
and water
�
Low profile design for conformability to wires and cables
Adhesive Permanent rubber-based
�
High tack adhesive makes SP suitable for flagging and
wrapping around thin gauge wires
Service temperature –40°C to +150°C –40°F to +302°F
Recommended printer T308S*
Recommended ribbon 1330-0607-10*
*Alternative printers and ribbons are available for special
applications. Contact Tyco Electronics Identification for
more information.
Part numbering system
SP 100 225 WE 5
Pack size
Color
Label length
Label width
Product family
50
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
SP Self-laminating polyester labels
Ordering information
Available sizes and formats
Ordering Package Labels Max. Cable (A) Label (B) Label (C) Printable (D) Horizontal (E) Vertical (F) Web
description quantityacross OD width height height repeat repeat width
mm inches mm inches mm inches mm inches mm inches mm inches mm inches
SP050100WE10 10,000 5 5.1 .20 12.70 0.500 25.40 1.000 8.50 0.330 16.80 0.600 31.00 1.222 86.00 3.384
SP050143WE10 10,000 5 7.6 .30 12.70 0.500 36.50 1.437 12.70 0.500 16.80 0.662 42.20 1.661 86.00 3.384
SP075094WE10 10,000 4 7.6 .30 19.10 0.750 23.90 0.940 9.50 0.375 20.30 0.800 28.60 1.125 85.10 3.350
SP080150WE10 10,000 4 7.6 .30 20.30 0.800 38.10 1.500 12.70 0.500 22.90 0.900 44.50 1.750 94.90 3.736
SP100143WE5 5,000 3 7.6 .30 25.40 1.000 36.50 1.437 12.70 0.500 27.90 1.100 42.20 1.661 87.30 3.436
SP100225WE5 5,000 3 12.2 .48 25.40 1.000 57.20 2.250 19.10 0.750 27.90 1.100 66.70 2.625 87.30 3.436
SP100375WE2.5 2,500 3 22.4 .88 25.40 1.000 95.30 3.750 25.40 1.000 27.90 1.100 101.60 4.000 87.30 3.436
SP100594WE1 1,000 3 35.6 1.4 25.40 1.000 151.00 5.940 38.10 1.500 27.90 1.100 158.80 6.250 87.30 3.436
SP200225WE2.5 2,500 2 12.2 .48 50.80 2.000 57.20 2.250 19.10 0.750 50.80 2.000 66.70 2.625 107.60 4.236
SP200375WE2.5 2,500 2 22.4 .88 50.80 2.000 95.30 3.750 25.40 1.000 53.30 2.100 101.60 4.000 111.40 4.386
Options
Colors Standard White with clear tail
51
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
PVF Polyvinyl fluoride thermal transfer printable self-laminating labels
Tyco Electronics PVF is a thermal transfer printable, translucent
®
polyvinyl fluoride (Tedlar ) film with a permanent acrylic adhesive,
designed for wire and cable marking applications that require the
®
‘self-extinguishing’ properties of Tedlar . PVF labels are supplied
with a white printable area, which is over-laminated upon
application with the translucent portion of the label. This
‘self-laminating’ feature protects the printed area from exposure to
oil, solvents, water and abrasion. The low-profile design makes PVF
suitable for wrapping onto thin wire gauges. For reliable print
performance and durability use with Tyco Electronics 1330-3300
series ribbon.
Features and benefits
�
Resists water, oils, and conventional cleaning agents
�
Filters UV light
�
Exhibits high degree of resistance to aging
Temperature rating
�
Thermal transfer printable
Operating temperature range –53°C to +135°C –65°F to +275°F
Specifications/approvals
Tyco Electronics TTDS-111
Printer information
Tyco Electronics printer T308S* (thermal transfer)
Tyco Electronics ribbon 1330-3300-10* (thermal transfer)
*Alternative printers and ribbons are available
for special applications. Contact Tyco
Electronics Identification for more information.
Part numbering system
PVF 080 150 WE 10
Pack size
Color
Label height (inches)
Label width
Product family
52
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
PVF Polyvinyl fluoride thermal transfer printable self-laminating labels
Ordering information
Available sizes and formats
Ordering Package Labels Max. Cable (A) Label (B) Label (C) Printable (D) Horizontal (E) Vertical (F) Web
description quantityacross OD width height height repeat repeat width
mm inches mm inches mm inches mm inches mm inches mm inches mm inches
PVF050100WE10 10,000 5 5.1 .20 12.70 0.500 25.40 1.000 8.50 0.330 16.80 0.600 31.00 1.222 86.00 3.384
PVF050143WE10 10,000 5 7.6 .30 12.70 0.500 36.50 1.437 12.70 0.500 16.80 0.662 42.20 1.661 86.00 3.384
PVF080150WE10 10,000 4 7.6 .30 20.30 0.800 38.10 1.500 12.70 0.500 22.90 0.900 44.50 1.750 94.90 3.736
PVF100143WE5 5,000 3 7.6 .30 25.40 1.000 36.50 1.437 12.70 0.500 27.90 1.100 42.20 1.661 87.30 3.436
PVF100225WE5 5,000 3 12.2 .48 25.40 1.000 57.20 2.250 19.10 0.750 27.90 1.100 66.70 2.625 87.30 3.436
PVF100375WE2.5 2,500 3 22.4 .88 25.40 1.000 95.30 3.750 25.40 1.000 27.90 1.100 101.60 4.000 87.30 3.436
PVF100594WE1 1,000 3 35.6 1.4 25.40 1.000 151.0 5.940 38.10 1.500 27.90 1.100 158.80 6.250 87.30 3.436
PVF100743WE1 1,000 3 35.6 1.4 25.40 1.000 188.9 7.437 38.10 1.500 27.90 1.100 195.30 7.688 87.30 3.436
PVF190319WE2.5 2,500 2 12.2 .48 48.30 1.900 81.00 3.190 19.10 0.750 50.80 2.000 87.40 3.440 105.10 4.138
PVF190594WE1 1,000 2 35.6 1.4 48.30 1.900 151.00 5.940 38.10 1.500 50.80 2.000 158.80 6.250 105.10 4.138
PVF200143WE2.5 2,500 2 7.6 .30 50.80 2.000 36.50 1.437 12.70 0.500 50.80 2.000 42.20 1.661 107.60 4.236
PVF200225WE2.5 2,500 2 12.2 .48 50.80 2.000 57.20 2.250 19.10 0.750 50.80 2.000 66.70 2.625 107.60 4.236
PVF200375WE2.5 2,500 2 22.4 .88 50.80 2.000 95.30 3.750 25.40 1.000 53.30 2.100 101.60 4.000 111.40 4.386
PVF200743WE1 1,000 2 48.3 1.9 50.80 2.000 188.90 7.437 38.10 1.500 53.30 2.100 195.30 7.688 110.10 4.336
Options
Colors Standard White with clear tail
Non-Standard Red, Orange, Yellow, Green, Blue, Violet, with clear tail
53
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
TW Dot matrix printable self-laminating labels
Tyco Electronics TW is a dot matrix printable, translucent vinyl film
with a permanent acrylic adhesive, supplied with a white printable
area, which is over-laminated upon application with the translu-
cent portion of the label. This ‘self-laminating’ feature protects the
printed area from exposure to oil, solvents, water and abrasion.
TW labels offer excellent conformability to round, irregular or
flexible surfaces, and are ideal for wire and cable identification,
including flat ribbon cables that are subject to repeated bending.
They are UL Listed, with reliable print performance and durability,
when used with Tyco Electronics 1892BK01 ribbon.
Features and benefits
�
Manufactured with a white coated area for printing or writing
on, and with a clear wrap to wind around a wire or cable over
the printed surface to seal out impurities that would cause the
label to become illegible
�
Protects printed information from chemicals and frequent
handling
�
Designed to withstand exposure to oil, solvents, and water
Temperature rating
Operating temperature range –40°C to +80°C –40°F to +176°F
Specifications/approvals
Industry UL MH17292 Group PGJI2
Printer information
Tyco Electronics printer AM6310 (dot matrix)
Tyco Electronics ribbon 1892BK01 (dot matrix)
Part numbering system
J TW 10
Pack size
Product family
Label size
54
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
TW Dot matrix printable self-laminating labels
Ordering information
Available sizes and formats
Ordering Package Labels Max. Cable (A) Label (B) Label (C) Printable (D) Horizontal (E) Vertical (F) Web
description quantity across OD width height height repeat repeat width
mm inches mm inches mm inches mm inches mm inches mm inches mm inches
J-TW10 10,000 12 5.1 0.20 12.70 0.500 19.10 0.750 9.50 0.375 15.20 0.600 25.40 1.000 205.70 8.100
N-TW10 10,000 16 7.6 0.30 12.70 0.500 36.50 1.437 12.70 0.500 12.70 0.500 38.10 1.500 228.60 9.000
Q-TW10 10,000 9 7.6 0.30 19.10 0.750 44.50 1.750 12.70 0.500 22.90 0.900 50.80 2.000 227.30 8.950
A-TW10 10,000 6 7.6 0.30 20.30 0.800 36.50 1.437 12.70 0.500 22.90 0.900 38.10 1.500 160.00 6.300
O-TW10 10,000 8 7.6 0.30 25.40 1.000 36.50 1.437 12.70 0.500 25.40 1.000 38.10 1.500 228.60 9.000
R-TW5 5,000 8 12.2 0.48 25.40 1.000 57.20 2.250 19.10 0.750 25.40 1.000 63.50 2.500 228.60 9.000
T-TW2.5 2,500 8 22.4 0.88 25.40 1.000 95.30 3.750 25.40 1.000 25.40 1.000 101.60 4.000 228.60 9.000
W1-TW1 1,000 8 35.6 1.40 25.40 1.000 150.90 5.940 38.10 1.500 25.40 1.000 152.40 6.000 228.60 9.000
D1-TW1 1,000 7 35.6 1.40 25.40 1.000 188.90 7.437 38.10 1.500 27.90 1.100 190.50 7.500 218.40 8.600
C1-TW2.5 2,500 3 12.2 0.48 48.30 1.900 81.00 3.190 19.10 0.750 50.80 2.000 88.90 3.500 175.30 6.900
P-TW5 5,000 4 7.6 0.30 50.80 2.000 36.50 1.437 12.70 0.500 50.80 2.000 38.10 1.500 228.60 9.000
S-TW2.5 2,500 4 12.2 0.48 50.80 2.000 57.20 2.250 19.10 0.750 50.80 2.000 63.50 2.500 228.60 9.000
U-TW2.5 2,500 4 22.4 0.88 50.80 2.000 95.30 3.750 25.40 1.000 50.80 2.000 101.60 4.000 228.60 9.000
W2-TW1 1,000 3 48.3 1.90 50.80 2.000 150.90 5.940 38.10 1.500 53.30 2.100 152.40 6.000 182.90 7.200
D3-TW1 1,000 3 48.3 1.90 50.80 2.000 188.90 7.437 38.10 1.500 55.90 2.200 190.50 7.500 188.00 7.400
Options
Colors Standard White with clear tail
55
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
PV Polyvinyl fluoride dot matrix printable self-laminating labels
Tyco Electronics PV is a dot matrix printable, translucent polyvinyl
®
fluoride (Tedlar ) film with a permanent acrylic adhesive, designed
for wire and cable marking applications that require the
®
‘self-extinguishing’ properties of Tedlar . PV labels are supplied
with a white printable area, which is over-laminated upon
application with the translucent portion of the label. This
‘self-laminating’ feature protects the printed area from exposure to
oil, solvents, water and abrasion. The low-profile design makes PV
suitable for wrapping onto thin wire gauges. For reliable print
performance and durability, use with Tyco Electronics
1892BK01 ribbon.
Features and benefits
�
Resists water, oils, and conventional cleaning agents
�
Filters UV light
�
Exhibits high degree of resistance to ageing
Temperature rating
�
Self-laminating feature for protection and mark permanence of
Operating temperature range –53°C to +135°C –65°F to +275°F
the printed area of the label
Specifications/approvals
Tyco Electronics TTDS- 092
Printer information
Tyco Electronics printer AM6310 (dot matrix)
Tyco Electronics ribbon 1892BK01 (dot matrix)
Part numbering system
N- PV 10
Pack size
Product family
Product size
56
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
PV Polyvinyl fluoride dot matrix printable self-laminating labels
Ordering information
Available sizes and formats
Ordering Package Labels Max. Cable (A) Label (B) Label (C) Printable (D) Horizontal (E) Vertical (F) Web
description quantity across OD width height height repeat repeat width
mm inches mm inches mm inches mm inches mm inches mm inches mm inches
J-PV10 10,000 12 5.1 0.20 12.70 0.500 19.10 0.750 9.50 0.375 15.20 0.600 25.40 1.000 205.70 8.100
N-PV10 10,000 16 7.6 0.30 12.70 0.500 36.50 1.437 12.70 0.500 12.70 0.500 38.10 1.500 228.60 9.000
Q-PV10 10,000 9 7.6 0.30 19.10 0.750 44.50 1.750 12.70 0.500 22.90 0.900 50.80 2.000 227.30 8.950
A-PV10 10,000 6 7.6 0.30 20.30 0.800 36.50 1.437 12.70 0.500 22.90 0.900 38.10 1.500 160.00 6.300
O-PV10 10,000 8 7.6 0.30 25.40 1.000 36.50 1.437 12.70 0.500 25.40 1.000 38.10 1.500 228.60 9.000
R-PV5 5,000 8 12.2 0.48 25.40 1.000 57.20 2.250 19.10 0.750 25.40 1.000 63.50 2.500 228.60 9.000
T-PV2.5 2,500 8 22.4 0.88 25.40 1.000 95.30 3.750 25.40 1.000 25.40 1.000 101.60 4.000 228.60 9.000
W1-PV1 1,000 8 35.6 1.40 25.40 1.000 150.90 5.940 38.10 1.500 25.40 1.000 152.40 6.000 228.60 9.000
D1-PV1 1,000 7 35.6 1.40 25.40 1.000 188.90 7.437 38.10 1.500 27.90 1.100 190.50 7.500 218.40 8.600
C1-PV2.5 2,500 3 12.2 0.48 48.30 1.900 81.00 3.190 19.10 0.750 50.80 2.000 88.90 3.500 175.30 6.900
P-PV5 5,000 4 7.6 0.30 50.80 2.000 36.50 1.437 12.70 0.500 50.80 2.000 38.10 1.500 228.60 9.000
S-PV2.5 2,500 4 12.2 0.48 50.80 2.000 57.20 2.250 19.10 0.750 50.80 2.000 63.50 2.500 228.60 9.000
U-PV2.5 2,500 4 22.4 0.88 50.80 2.000 95.30 3.750 25.40 1.000 50.80 2.000 101.60 4.000 228.60 9.000
W2-PV1 1,000 3 48.3 1.90 50.80 2.000 150.90 5.940 38.10 1.500 53.30 2.100 152.40 6.000 182.90 7.200
D3-PV1 1,000 3 48.3 1.90 50.80 2.000 188.90 7.437 38.10 1.500 55.90 2.200 190.50 7.500 188.00 7.400
Options
Colors Standard White with clear tail
57
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
LSR Laser printable self-laminating labels
Tyco Electronics LSR is a laser printable, translucent polyester film
with a permanent acrylic adhesive, supplied with a white printable
area, which is over-laminated upon application with the
translucent portion of the label. This ‘self-laminating’ feature
protects the printed area from exposure to oil, solvents, water and
abrasion with good conformability to round surfaces. LSR is ideal
for wire and cable marking including flat ribbon cable. The low-
profile design makes LSR suitable for wrapping onto thin wire
gauges.
Features and benefits
�
Manufactured with a white coated area for printing or writing
on, and with a clear wrap to wind around a wire or cable over
the printed surface to seal out impurities that would cause
the label to become illegible
�
Protects printed information from chemicals and
frequent handling
�
Designed to withstand exposure to oil, solvents, and water
�
Can also be flagged around a wire rather than wrapped
Temperature rating
Operating temperature range –40°C to +150°C –40°F to +302°F
Printer information
Standard laser printer with auto/manual sheet feed.
Contact Tyco Electronics Identification for more information.
58
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
LSR Laser printable self-laminating labels
Ordering information
Available sizes and formats
Ordering Package Labels Labels (A) Label (B) Label (C) Printable (D) Horizontal (E) Vertical
description quantity across per sheet width height height repeat repeat
mm inches mm inches mm inches mm inches mm inches
CR-100-LSR 4,992 13 156 12.70 0.500 19.10 0.750 9.40 0.370 15.20 0.600 20.60 0.810
CR-101-LSR 4,992 13 78 12.70 0.500 38.10 1.500 12.70 0.500 15.20 0.600 40.60 1.600
CR-105-LSR 5,040 7 84 25.40 1.000 19.10 0.750 8.60 0.340 27.90 1.100 20.60 0.810
CR-106-LSR 2,520 7 63 25.40 1.000 25.40 1.000 8.60 0.340 27.90 1.100 27.90 1.100
CR-107-LSR 2,499 7 49 25.40 1.000 33.80 1.330 12.70 0.500 27.90 1.100 36.60 1.440
CR-108-LSR 1,008 7 21 25.40 1.000 80.50 3.170 24.60 0.970 27.90 1.100 84.10 3.310
CR-110-LSR 1,008 4 12 47.80 1.880 80.50 3.170 24.60 0.970 50.80 2.000 83.30 3.280
59
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
CSL A4 Laser printable self-laminating labels
Tyco Electronics CSL is a laser printable, clear polyester film with a
permanent acrylic adhesive, supplied with a white or yellow
printable area, which is over-laminated upon application with the
clear section of the label.
Using the over-lamination process protects the printed area
against exposure to oil, solvents, water and abrasion.
Features and benefits
�
Manufactured with a white or yellow coated area for writing on,
and with a clear wrap to wind around a wire or cable to cover
the written legend and to protect it against impurities that
would cause the label to become illegible
�
Protects printed information from chemicals and frequent
�
handling
�
Designed to withstand exposure to Solvents, salts, alkalis and
�
water
Temperature rating
�
Can also be flagged around a wire rather than wrapped
Operating temperature range –30°C to +120°C –22°F to +248°F
Part numbering system
CSL- 034 23 P- 4
Color
Material (Polyester)
Label width
Label height
Product family
60
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
CSL A4 Laser printable self-laminating labels
Ordering information
B
A
C
Available sizes and formats
Ordering Markers/ A B C Max. cable
description pack height height width diameter
mm inches mm inches mm inches mm inches
CSL-02713P- 160 26.70 1.05 6.00 0.24 12.50 0.49 3.00 0.12
CSL-03418P- 88 33.90 1.33 8.50 0.33 18.18 0.72 5.00 0.20
CSL-03425P- 64 33.90 1.33 12.70 0.50 25.00 0.98 5.00 0.20
CSL-05525P- 40 55.00 2.17 12.70 0.50 25.00 0.98 11.00 0.43
CSL-06925P- 32 69.00 2.72 17.00 0.67 25.00 0.98 14.00 0.55
CSL-06933P- 24 69.00 2.72 22.00 0.87 33.33 1.31 13.00 0.51
CSL-09333P- 18 93.00 3.66 25.40 1.00 33.33 1.31 19.00 0.75
CSL-14033P- 12 140.00 5.51 25.40 1.00 33.33 1.31 34.00 1.34
Options
Colors Yellow White
Code 4 9
61 61
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
TKM Hand writable booklet self-laminating labels
Tyco Electronics TKM is a self writable, clear vinyl film with a
permanent acrylic adhesive, supplied with a white writable area,
which is over-laminated upon application with the clear portion of
the label.
TKM labels are a quick, simple and durable form of wire, cable and
pipe identification.
.
Features and benefits
�
Manufactured with a white coated area for writing on, and with
�
a clear wrap to wind around a wire or cable to cover the written
�
legend and to protect it against impurities that would cause the
�
label to become illegible
�
Protects printed information from chemicals and frequent
�
handling
�
Supplied in a handy pocket size booklet Temperature rating
Operating temperature range –54°C to +82°C –65°F to +180°F
�
Designed to withstand exposure to Solvents, salts, alkalis
Specifications/Approvals
and water
Tyco Electronics TTDS-056
Part numbering system
TKM 75 WE - N
Standard Packaging
Color (WE=White)
Label size
Product family
62
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
TKM Hand writable booklet self-laminating labels
Ordering information
B
A
C
Available sizes and formats
Ordering Markers/ A B C Max. cable
description pack height height width diameter
mm inches mm inches mm inches mm inches
TKM75WE-N 60 75.00 3.0 25.00 1.00 25.00 1.00 14.00 0.60
TKM150WE-N 30 150.00 6.0 25.00 1.00 25.00 1.00 38.00 1.50
TKM230WE-N 30 230.00 9.0 25.00 1.00 25.00 1.00 63.00 2.50
Accessories for manual marking
Ordering Description Quantity per pack
description
ZUB-01 Felt-tip pen, fine 1
ZUB-03 Pencil for UV-resistant labelling 1
63
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Label Dimensions
Self-Laminating Label Dimensions
25.4mm
19.1mm
12.7mm
38.1mm
Print
12.7mm 12.7mm
Print
area
area
9.5mm 8.5mm
Print Print
Q-TW10
area area
Q-PV10
J-TW10
J-PV10
SP050100WE10
12.7mm
SB050100WE10
PVF050100WE10
12.7mm
Print
25.4mm
area
SP100594-WE1
20.3mm
SB100594WE1
19.1mm
PVF100594WE1
Print
12.7mm
SB050143WE10 W1-TW1
area
Print
PVF050143WE10 W1-PV1
area
N-TW10
N-PV10
SP080150WE10
SP100225WE5
SB080150WE10
SB100225WE5
20.3mm
PVF080150WE10
PVF100225WE5
R-TW5
12.7mm
R-PV5
Print
area
50.8mm
A-TW10
A-PV10
19.1mm
Print
area
25.4mm
12.7mm 25.4mm
SP200225WE2.5
Print
SB200225WE2.5
area
PVF200225WE2.5
25.4mm
S-TW2.5
Print
SP100143WE5
S-PV2.5
area
SB100143WE5
PVF100143WE5
O-TW10
O-PV10 SP100375WE2.5
SB100375WE2.5
PVF100375WE2.5
48.3mm
50.8mm
T-TW2.5
T-PV2.5
19.1mm
12.7mm
Print
Print
area
area
SB200143WE2.5
PVF200143WE2.5
P-TW5 SB190319WE2.5
P-PV5 PVF190319WE2.5
C1-TW2.5
C1-PV2.5
19.1mm
9.5mm
Print
area
SP075094WE10
Note: Drawing is not to scale
64
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
36.5mm 36.5mm 36.5mm
23.9mm 36.5mm 19.1mm
25.4mm
57.2mm
57.2mm
44.5mm
95.3mm
38.1mm
81.0mm
150.9mm
Self-Laminating Labels
Self-Laminating Label Dimensions
50.8mm
38.1mm
25.4mm
Print
area
38.1mm
Print
area
50.8mm
38.1mm
Print
W2-TW1
area
W2-PV1
SB100743WE1
PVF100743WE1
48.3mm
D1-TW1
D1-PV1
38.1mm
Print
area
SB200743WE1
PVF200743WE1
D3-TW1
D3-PV1
50.8mm
SB190594WE1
PVF190594WE1
25.4mm
Print
area
SP200375WE2.5
SB200375WE2.5
PVF200375WE2.5
U-TW2.5
U-PV2.5
Note: Drawing is not to scale
65
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
150.9mm
150.9mm
188.9mm
188.9mm
95.3mm
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
TEK Hand writeable vinyl fabric labels
Tyco Electronics TEK vinyl fabric pocket packs are suitable for on-
the-spot labeling. Thanks to their handy size they fit in the pocket
or the technician’s toolbox.
The packs are available in the most common label sizes. They can
be written on using the pencil (ZUB-03) or the felt-tip pen
(ZUB-01).
Features and benefits
�
Portability
�
On the spot labeling
Temperature rating
Operating temperature range –29°C to +80°C –20°F to +176°F
Properties
Adhesive removal without residue (approx. 1 year). Very pliable film.
Age resistant. Fabric materials silicone free.
Resistant against
Water, sea water, alcohol, engine oils, methanol, petrol (gasoline)
Part numbering system
TEK 8 21 - N
Standard Packaging
Label width (mm)
Label height (mm)
Product family
66
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
TEK Hand writeable vinyl fabric labels
Ordering information
A
B
Available sizes and formats
Ordering Markers/ (A) (B) Black
description pack height width Border
mm inches mm inches with without
TEK 821-N 640 8.00 2.0 21.00 0.60 -X
TEK 914-N 840 9.00 3.0 14.00 1.00 -X
TEK 1119-N 440 11.00 6.0 19.00 1.00 X-
TEK 1138-N 220 11.00 9.0 38.00 1.00 X-
Accessories for manual marking
Ordering Description Quantity per pack
description
ZUB-01 Felt-tip pen, fine 1
ZUB-03 Pencil for UV-resistant labelling 1
67
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
CMD Cable and wire marker dispenser
Tyco Electronics CMD is one of the most user friendly portable
wire marker systems available. Each dispenser contains 10 rolls of
individually numbered marker tape. Each roll of markers contains
76 individual markers which are a convenient length that accom-
modates most commonly identified wire sizes.
®
Manufactured from DuPont Tyvek material to ensure durability
and minimize the potential of tearing.
Features and benefits
■
Supplied with a pre-determined length of 32mm and a width of
6.4mm
■
Supplied in a handy pocket size reusable dispenser
■
Aggressive acrylic adhesive impervious to oil and water
Temperature rating
Operating temperature range –40°C to +80°C –40°F to +176°F
Specifications/approvals
Tyco Electronics TTDS-141
Part numbering system
CMD - 0-9
Contents
Product family
68
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
CMD Cable and wire marker dispenser
Ordering information
A
Available sizes and formats
Ordering Markers/ (A) (B) Comments
description pack height width
mm inches mm inches
CMD-0-9 10 x 76 32.0 1.25 6.4 0.25 Loaded dispenser contains markers pre-marked 0 to 9
CMD-CC 10 x 76 32.0 1.25 6.4 0.25 Loaded dispenser contains colour coded markers
Extra Items
CMD-0-9-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked 0 to 9
CMD-CC-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box colour coded
CMD-EMPTY N/A N/A N/A Empty dispenser
CMD-A-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked A
CMD-B-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked B
CMD-C-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked C
CMD-D-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked D
CMD-E-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked E
CMD-F-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked F
CMD-G-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked G
CMD-H-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked H
CMD-L-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked L
CMD-N-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked N
CMD-R-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked R
CMD-S-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked S
CMD-T-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked T
CMD-U-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked U
CMD-V-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked V
CMD-W-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked W
CMD-MINUS-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked -
CMD-PLUS-REFILL 10 x 76 32.0 1.25 6.4 0.25 Refill box pre-marked +
69
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
B
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
WCD Write-on self-laminating label dispensers
Tyco Electronics WCD is a pocket sized label dispenser containing
a roll of pre-cut self-laminating cable markers. Each market has a
white markable area for legend inscription using the specified
marker pen (ZUB-01).
Manufactured with a white coated area for writing on, and with a
clear wrap to wind around a wire or cable to cover the written leg-
end and to protect it against impurities that would cause the label
to become illegible.
Features and benefits
■
Protects printed information from chemicals and frequent
handling
■
Supplied in a handy pocket size disposable dispenser
■
Aggressive acrylic adhesive impervious to oil and water
Temperature rating
Operating temperature range –40°C to +80°C –40°F to +176°F
Specifications/approvals
Tyco Electronics TTDS-140
Part numbering system
WCD - 318
Label Length (ex: 31.8 mm)
Product family
70
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Self-Laminating Labels
WCD Write-on self-laminating label dispensers
Ordering information
B
A
C
Available sizes and formats
Ordering Markers/ (A) (B) (C) Max. Cable
description pack height height width diameter
mm inches mm inches mm inches mm inches
WCD-318 300 31.8 1.25 7.95 0.31 19.0 0.75 7.6.2 0.30
WCD-476 150 47.6 1.87 12.7 0.50 19.0 0.75 10.16 0.40
WCD-762 90 76.2 3.0 19.0 0.75 19.0 0.75 17.78 0.70
WCD-1520 40 152.0 5.98 25.4 1.00 19.0 0.75 40.64 1.60
Accessories for manual marking
Ordering Description Quantity per pack
description
ZUB-01 Felt-tip pen, fine 1
ZUB-03 Pencil for UV-resistant labelling 1
71
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Self-Laminating Labels
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
K-Type® cable markers
K-Type® markers are used to identify wire bundles, cables, pipes
and conduits using specially designed oval shaped, individual
characters that slide on to a PVC carrier, which is then attached to
the substrate using cable ties. K-Type® markers are ideal for post
termination applications or where retrofit is anticipated.
These markers are supplied yellow with black legends and in the
standard International colour code option and are supplied on
reels. K-Type® markers come in one standard size to fit carrier
strips that can hold from 7 to 18 markers and are made from a
plasticized PVC material.
Features and benefits
�
Versatile marking system for cables , cable bundles and conduit
�
Elliptical marker profile allows easy fitting to carrier strips
Temperature rating
Operating temperature range –40°C to +70°C –40°F to +158°F
Specifications/approvals
Tyco Electronics TTDS- 025
Part numbering system
1361 1 4 01
Legend code
Color code
Packaging code
Product/size code
72
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cble Markers
K-Type® cable markers
Ordering information
Markers
Size code Marker size Marker Length (mm) Cable diameter (mm) Reel quantity
1361 65 60 4.2 – 7.0 500
Packaging Code
1 Reel
Color Code (Available for All Legends)
4 Yellow 9 White
International color code
Legend Marker Color Ink Color Legend Marker Color Ink Color Legend Marker Color Ink Color
0 Black White 1 Brown White 2 Red Black
3 Orange Black 4 Yellow Black 5 Green Black
6 Blue Black 7 Violet Black 8 Gray Black
9 White Black
Legend code
Legend Code Legend Code Legend Code
000 J 19 / 38
101 K 20 ~ 39
2 02 L 21 Earth 40
303 M 22 ) 41
4 04 N 23 Blank 42
505 O 24 : 43
606 P 25 , 44
707 Q 26 < 45
808 R 27 > 46
909 S 28 = 47
A10 T 29 . 48
B11 U 30
C12 V 31
D13 W 32
E14 X 33
F15 Y 34
G16 Z 35
H17 + 36
I18 - 37
Carrier Strips
Order code Capacity Quantity
11320000 7 markers 500
11310000 12 markers 500
11300000 18 markers 250
11330000 * 12 markers 100
* This carrier can be used to flag
73
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
G-Type® push-on wire markers
G-Type® markers are individual push-on characters used to
identify wires and small cables. They are designed with an
expanding profile, enabling each marker to accommodate a wide
range of wire/cable sizes. The markers are supplied chevron cut
to ensure the legend remains aligned.
G-Type® markers are yellow with black legends and are supplied
as loose pieces packed in boxes.
G-Type® markers are particularly suitable for applications
requiring low fire hazard properties. They are made from a
self-extinguishing modified thermoplastic polymer and are
halogen, silicone and cadmium free.
Features and benefits
�
Low Fire Hazard
�
Zero halogen, self extinguishing material
Specifications/approvals
�
Gusseted design allows marker to fit over a wide range
Tyco Electronics TTDS- 024
of cable diameters
Temperature rating
�
Chevron cut ensures markers stay aligned
Operating temperature range –45°C to +70°C –50°F to +158°F
Flammability
LOI 40%, FTI > 300°C
Part numbering system
0719 1 4 01
Legend code
Color code (4 = yellow only)
Packaging code (1 = box only)
Product/size code
74
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
G-Type® push-on wire markers
Ordering information
Size code Marker size Cable diameter (mm) Box quantity
0719 G3/10 1.4 – 2.5 1000
0720 G3/20 2.0 – 3.5 1000
0721 G4/10 3.0 – 6.0 500
0722 G6/10 5.0 – 9.5 250
0723 G6/20 8.0 – 12.5 250
Packaging Code
1 Box
Color Code (Available for All Legends)
4 Yellow
Legend code
Legend Code Legend Code Legend Code
000 J 19 / 38
101 K 20 ~ 39
2 02 L 21 Earth 40
303 M 22 ) 41
4 04 N 23 Blank 42
505 O 24 : 43
606 P 25 , 44
707 Q 26 < 45
808 R 27 > 46
909 S 28 = 47
A10 T 29 . 48
B 11 U 30 L1 51
C 12 V 31 L2 52
D 13 W 32 L3 53
E 14 X 33 Serd 54
F 15 Y 34 PE 55
G16 Z 35 PEN 56
H17 + 36 ( 62
I18 - 37
75
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
Z-Type® push-on wire markers
Z-Type® markers are individual push-on characters used to
identify wires and small cables permanently. They are designed
with an expanding profile, enabling each marker to accommodate
a wide range of wire/cable sizes.
Z-Type® markers are a simple, cost-effective solution for many
commercial wire identification applications. The markers are
supplied either straight cut or chevron cut: the chevron cut option
ensures the legends remain aligned. Standard Z-Type® markers
are yellow or white with black legends and can be supplied as
loose pieces packed in boxes or on reels. Color coded markers are
also available.
Features and benefits
�
Resistant to sea water, fuels and oils
�
9 sizes covering wire diameters from1.5mm to 12.7mm
(0.06 inches to 0.5 inches)
Specifications/approvals
�
Applicator wands available for easy marker installation
Tyco Electronics TTDS- 026
Temperature rating
Operating temperature range –45°C to +70°C –50°F to +158°F
Part numbering system
0616 1 4 00
Legend code
Color code
Packaging code
Product/size code
76
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
Z-Type® push-on wire markers
Ordering information
Size code Size code Marker size Marker Length (mm) Pack quantity Cable diameter
(straight cut) (chevron cut) mm inches
0580 1151 5 4.5 1000 1.5 - 2.0 0.06 - 0.08
0581 1152 7 4.5 1000 2.0 - 3.2 0.08 - 0.13
0615 1153 9 4.5 1000 2.5 - 4.0 0.10 - 0.16
0616 1154 11 4.5 1000 2.9 - 4.7 0.11 - 0.19
0617 1155 13 4.5 1000 3.4 - 5.7 0.13 - 0.22
0618 1156 15 4.5 1000 3.8 - 6.3 0.15 - 0.25
0620 1157 18 4.5 500 4.3 - 6.9 0.17 - 0.27
0622 1158 23 6.0 500 5.5 - 8.9 0.22 - 0.35
0624 1159 35 6.0 250 7.9 - 12.7 0.31 - 0.50
Packaging Code
1 Box 3 Reel
Color Code (Available for All Legends)
4 Yellow 9 White
Packaging Options available
Straight Cut Chevron cut
White marker with black legend: Boxes, reels White marker with black legend: Boxes
Yellow marker with black legend: Reels Yellow marker with black legend: Reels
Color coded Boxes Color coded Boxes, reels
Color Code
Legend Marker Color Ink Color Legend Marker Color Ink Color
0 Black White 1 Brown White
2 Red Black 3 Orange Black
4 Yellow Black 5 Green Black
6 Blue Black 7 Violet Black
8 Gray Black 9 White Black
Order example: 06161400 (Z-Type® markers, size 11, yellow marker with black legend 0, boxed)
Legend code
Legend Code Legend Code Legend Code
000 J 19 / 38
101 K 20 ~ 39
2 02 L 21 Earth 40
303 M 22 ) 41
4 04 N 23 Blank 42
505 O 24 : 43
606 P 25 , 44
707 Q 26 < 45
808 R 27 > 46
909 S 28 = 47
A10 T 29 . 48
B11 U 30
C12 V 31
D13 W 32
E14 X 33
F15 Y 34
G16 Z 35
H17 + 36
I18 - 37
Applicators
Order Code Marker Size Pack Quantity Order Code Marker Size Pack Quantity
12510000 7 1 12520000 9 1
12530000 11 1 12540000 13 1
12550000 15 1 12560000 18 1
77
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
V-Type™ Manual wire and cable markers
V-Type™ markers are individual push-on characters used to
identify wires and small cables permanently. They are designed
with an expanding profile, enabling each marker to accommodate
a wide range of wire/cable sizes.
V-Type™ markers are a simple, cost-effective solution for many
commercial wire identification applications. The markers are
supplied chevron cut and this ensures the legends remain aligned.
Standard V-Type™ markers are yellow or white with black legends
and can be supplied as loose pieces packed in boxes, on reels or
flat disc reels. Color coded markers are also available.
Features and benefits
�
Resistant to sea water, fuels and oils
�
4 sizes covering wire diameters from1.4mm to 16.0mm
(0.06 inches to 0.63 inches)
Specifications/approvals
Tyco Electronics TTDS-096
Temperature rating
Operating temperature range –45°C to +70°C –50°F to +158°F
Part numbering system
0761 1 4 00
Mark/legend code
Color code
Packaging code
Size code
78
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
V-Type™ Manual wire and cable markers
Ordering information
Size code Marker size Cable diameter Packed
mm inches
0761 3 1.4 - 2.8 0.06 - 0.11 1000
0762 5 2.8 - 5.0 0.11 - 0.20 1000
0763 10 4.0 - 10.0 0.16 - 0.39 500
0764 15 8.0 - 16.0 0.31 - 0.63 250
Packaging Code
1 Box 3 Reel
Color Code (Available for All Legends)
4 Yellow 9 White
Color code (for numbers 0-9 only)
Legend Marker Color Ink Color Legend Marker Color Ink Color Legend Marker Color Ink Color
0 Black White 1 Brown White 2 Red White
3 Orange Black 4 Yellow Black 5 Green White
6 Blue White 7 Violet White 8 Gray Black
9 White Black
Mark/Legend code
Legend Code Legend Code Legend Code
000 J 19 / 38
101 K 20 ~ 39
2 02 L 21 Earth 40
303 M 22 ) 41
4 04 N 23 Blank 42
505 O 24 : 43
606 P 25 , 44
707 Q 26 < 45
808 R 27 > 46
909 S 28 = 47
A10 T 29 . 48
B11 U 30
C12 V 31
D13 W 32
E14 X 33
F15 Y 34
G16 Z 35
H17 + 36
I18 - 37
79
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
O-Type™ Manual wire and cable markers
The O-Type™ markeris a thin walled plasticised PVC marker which
is particularly suited to high density wiring applications where
space saving is paramount.
They are color coded to BS3858: 1992 which includes repeated
printing of the individual digit three times around the circumfer-
ence of the marker.
Letters and symbols are printed on a pink background.
Features and benefits
�
Conforms to BS3858: 192 Type 3
�
Color coding enables identification when mark is obscured
�
Thin wall for densely packed wiring
2
�
Nine sizes of marker cover cable sizes up to 16mm
Temperature rating
Operating temperature range –65°C to +95°C –85°F to +203°F
Part numbering system
1106 99 10
Mark/Legend code
Color code
Size code
80
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
O-Type™ Manual wire and cable markers
Ordering information
Size Code Cable Diameter Cable Size Marker Marker
2
Part Cut mm mm Size Length mm Packed
1106 0.6 - 1.0 - 0.75 3.0 1000
1107 0.9 - 1.3 - 10 4.0 1000
1108 1.1 - 1.6 - 12 3.0 1000
1109 1.4 - 2.1 - 15 3.0 1000
1110 1.9 - 2.8 - 20 5.0 1000
1111 2.4 - 3.5 1.0 25 5.0 1000
1112 2.9 - 4.8 1.5 30 5.0 1000
1113 3.9 - 5.8 2.5 & 4.0 40 5.0 1000
1114 5.3 - 8.0 6.0 & 10.0 55 5.0 1000
Color Code (Available for All Legends)
99 Pink
Color code (for numbers 0-9 only)
Legend Marker Color Ink Color Legend Marker Color Ink Color Legend Marker Color Ink Color
0 Black White 1 Brown White 2 Red Black
3 Orange Black 4 Yellow Black 5 Green Black
6 Blue Black 7 Violet Black 8 Gray Black
9 White Black
Legend code
Legend Code Legend Code Legend Code Legend Code
000 J 19 / 38 SO 57
1 01 K 20 ~ 39 -10 58
2 02 L 21 Earth 40 -1 59
303 M 22 ) 41 -2 60
4 04 N 23 Blank 42
505 O 24 : 43
606 P 25 , 44
707 Q 26 < 45
808 R 27 > 46
909 S 28 = 47
A 10 T 29 Fullstop 48
B11 U 30 Ä 49
C12 V 31 Ö 50
D 13 W 32 L1 51
E 14 X 33 L2 52
F 15 Y 34 L3 53
G 16 Z 35 SERD 54
H 17 + 36 PE 55
I 18 - 37 PEN 56
81
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
Snap-On wire markers
Tyco Electronics snap-on markers are convenient and easy to use.
These markers are supplied on a ‘wand’ applicator that simplifies
and reduces installation time, and saves on the cost of marking.
Snap-on wire markers are designed to stand the test of time, pre-
venting costly re-work before the life of the equipment ends. This is
why Tyco Electronics snap-on markers are found today in power
stations, oil refineries, offshore platforms, and other major projects
around the world.
Features and benefits
�
Snap-on markers are the perfect way to permanently and
rapidly mark cables, wires, leads, and cores after
termination and installation
�
Easy to alter identification on cables that are already marked
�
Secure grip for positive fixing to cable
Specifications/approvals
�
The high elasticity of the marker enables all types of installation
Tyco Electronics TTDS- 094
and conduction material to be permanently
marked without damage Temperature rating
Operating temperature range –40°C to +106°C –40°F to +223°F
�
Applicator has a patented slit to prevent over-expansion of the
marker during application
�
Made from polyoxymethylene which guarantees strength,
dimensional stability, low moisture absorption, and
Part numbering system
resistance to chemicals
STD 06 W -4
�
Resistant against oils, cleaning agents, fuels, and
alkaline solutions
�
Zero-halogen material
Legend code
�
Ten sizes for cable diameters 0.04" to 0.75"
Color code (W=white)
(1.0mm to 19.0mm)
Size
Snap-on Marker
�
Color-coded option
82
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
Snap-On wire markers
Ordering information
Size Cable Diameter Color of Applicator Wand Packed Box
Code mm inches
STD 01 1.00 - 1.40 0.040 - 0.055 Brown 10 mounting wands with 30 identical markers
STD 02 1.40 - 1.80 0.055 - 0.071 Gray 10 mounting wands with 30 identical markers
STD 03 1.90 - 2.65 0.075 - 0.104 Green 10 mounting wands with 30 identical markers
STD 05 2.30 - 3.00 0.091 - 0.118 Natural 10 mounting wands with 30 identical markers
STD 06 2.60 - 3.50 0.102 - 0.138 Red 10 mounting wands with 30 identical markers
STD 09 3.25 - 4.50 0.128 - 0.177 Blue 10 mounting wands with 30 identical markers
STD12 4.50 - 6.00 0.177 - 0.236 Yellow 10 mounting wands with 30 identical markers
STD 15 5.80 - 8.50 0.228 - 0.335 Orange* 50 identical markers; applicator available on request
STD 17 8.50 - 11.50 0.335 - 0.452 Orange* 50 identical markers; applicator available on request
STD 21 11.00 - 15.50 0.433 - 0.610 Gray* 50 identical markers; applicator available on request
STD 24 15.00 - 19.00 0.590 - 0.750 Gray* 50 identical markers; applicator available on request
Color Code (Available for All Legends)
Y Yellow W White
Legend code
Legend Code Legend Code Legend Code
0 0 J J / Slash
1 1 K K Earth Earth
2 2 L L Blank Blank
3 3 M M : Colon
4 4 N N = Equals
5 5 O O . Dot
66 P P
77 Q Q
88 R R
99 S S
AA T T
BB U U
CC V V
DD W W
EE X X
FF Y Y
GG Z Z
H H + Plus
I I - Minus
Applicators
Order Code Marker Size Color of Applicator Number of Applications
Per Pack
STD15 - Applicator 15 Orange 5
STD17 - Applicator 17 Orange 5
STD21 - Applicator 21 Gray 2
STD24- Applicator 24 Gray 2
83
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
CWM Wire marker cards
Tyco Electronics CWM are pre-printed wire markers made with our
white vinyl coated cloth tape material, supplied on a thick, easy to
handle card stock, with a permanent, rubber based, pressure
sensitive adhesive for easy application. Ideal for basic wire marking
applications where pre-printed single or double-digit legends and
some resistance to a variety of solvents, water, oil, dirt and heat is
required.
Features and benefits
�
Convenient and easy to use
�
Pre-printed for on-site wire marking
�
Available in colors for color coding applications
�
Available in single and multiple digit legends
Specifications/approvals
Tyco Electronics TTDS- 100
Temperature rating
Operating temperature range –40°C to +82°C –40°F to +180°F
84
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
Pre-Printed Wire and Cable Markers
CWM Wire marker cards
Ordering information
Product Order Code Legend Option Package Quantity Label Width Label Height Card Width Card Height
mm inches mm inches mm inches mm inches
CWM-SL-# * Solid Numbers 0-99 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SL-letter * Solid Letters A - Z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SL-color * Solid Colors 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SL-legend * Solid 2+ Digits 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SQ-1-33 Sequential 1 - 33 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SQ-34-66 Sequential 34 - 66 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SQ-67-99 Sequential 67 - 99 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SQ-A-Z Sequential A - Z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SQ-AA-ZZ Sequential AA - ZZ 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SQ-a-z Sequential a - z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SQ-1-6 Sequential 1 - 6 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
CWM-SQ-1-18 Sequential 1 - 18 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.0 9.250 50.8 2.000
*Solid cards (SL) = 1 legend on each card. Select a single legend and add to the suffix of the product order code.
*Sequential cards (SQ) = a consecutive range of alpha or numeric legends on each card, as specified in the suffix of the product order code.
*Available options on product order code CWM-SL-legends are: T1, T2, T3, L1, L2, L3, GND, P1, A1, XS, PTO. Add legend suffix of order code.
85
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Pre-Printed Wire and Cable Markers
Wire and Harness ID Products
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods