Card Edge Connectors Catalog 1654080 Issued 7-03 Card Edge Connectors Introduction To assist you in the selec- ular printed circuit board The Tyco Electronics tion of the appropriate con- connector family are products presented in this This catalog contains nector for your application, provided at the beginning catalog are designed and product descriptions of a selection guide is provid- of that section. Various manufactured according AMP Card Edge Connectors. ed at the beginning of each technical documents are to the highest possible These connectors are pre- section. See the Table of referenced in the connector standards of quality and sented in three groups: Contents on the following family sections and are list- craftsmanship. They offer Solder Type Board-to- page for the exact location. ed and described at the optimum reliability at the Board, Press-fit Board-to- rear of this catalog. lowest possible cost. Board, and Wire-to-Board A comprehensive descrip- connectors. tion and features of a partic- Dimensioning: Need more information? Dimensions are in inches and millimeters unless specified otherwise. Values in Call Technical Support at brackets are metric equivalents. the numbers listed at the Metric symbols used are: bottom of the catalog m (meter) pages. mm (millimeter) 2 mm (square millimeter) kg (kilogram) Technical Support is staffed C (Celsius) N (newton) with specialists well versed in Tyco Electronics prod- Note: Dimensions in this catalog are for ucts. They can provide you reference purposes only. Customer with: drawings are available upon request. nTechnical Support © Copyright 1992, 1996 and 2002 by nCatalogs Tyco Electronics. All Rights Reserved. nTechnical Documents nProduct Samples AMP, ACTION PIN, AMP-DURAGOLD, nTyco Electronics AMP-LEAF, AMP-O-LECTRIC, AMP-O-MATIC, AMPOMATOR, Authorized Distributor AMP PACE, CERTI-CRIMP, DUO-TYNE, Locations ECONOMATE, TELEDENSITY, and TYCO are trademarks. Other products, logos, and company names mentioned herein may be trade- marks of their respective owners. Produced under a Quality Management System certified to ISO 9001 A copy of the certificate is available upon request 2 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Table of Contents Solder Type Board-to-Board Connectors Introduction………………………………………………………………………………………2 Selection Guide ………………………………………………………………………………4-6 Standard Edge Series Connectors Standard Edge .050 PCI Card Edge Connectors ………………………………………7-10 Standard Edge .050 Series Connectors ………………………………………………11-14 Standard Edge II Connectors ……………………………………………………………15-27 Cantilever Beam Dip Solder Tails Overview ……………………………………………………28 .100" [2.54] Centerline ……………………………………………………………………29-34 .125" [3.18] Centerline ……………………………………………………………………35-37 .156" [3.96] Centerline ……………………………………………………………………38-40 Modified Bellows Contact Overview ……………………………………………………………41 .100" [2.54] Centerline ……………………………………………………………………42-47 .125" [3.18] Centerline ……………………………………………………………………48-52 .156" [3.96] Centerline ……………………………………………………………………53-56 Polarization Keys ………………………………………………………………………………57 Standard Daughter Card Layout…………………………………………………………………57 Low Profile Connectors ……………………………………………………………………58-63 Twin Leaf Mother Board Connectors ………………………………………………………64-72 Rotary Cam ZIF Connectors …………………………………………………………………73-82 Linear ZIF Connectors ………………………………………………………………………83-96 Press-Fit Board-to-Board Connectors ACTION PIN Press-Fit Contacts ……………………………………………………………97 AMP PACE Connectors …………………………………………………………………98-115 TELEDENSITY Connectors ……………………………………………………………116-118 ECONOMATE Connectors ……………………………………………………………119-126 Cantilever Beam Press-Fit Connectors Overview ……………………………………………127 .050" [1.27] High Density ………………………………………………………………128-129 .100" [2.54] Centerline …………………………………………………………………130-140 .125" [3.18] Centerline …………………………………………………………………141-144 .156" [3.96] Centerline …………………………………………………………………145-148 Application Tooling ……………………………………………………………………149-151 Wire-to-Board Connectors Introduction …………………………………………………………………………………152 Selection Guide ………………………………………………………………………………153 Crimp Snap Twin Leaf Connectors …………………………………………………154-163 AMP-LEAF Connectors…………………………………………………………………164-172 High Current Connectors………………………………………………………………173-176 DUO-TYNE Flag Connectors …………………………………………………………177-180 Printed Circuit Board Connector Hood Assemblies ………………………………181-183 Application Tooling ……………………………………………………………………184,185 Technical Documents ……………………………………………………………………186,187 Part Number Index ………………………………………………………………………188-201 Tyco Electronics Related Product Information ………………………………………………202 3 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Selection Guide, Board-to-Board Connectors Introduction Board-to-board (mother/ Board-to-board connectors daughter board) connectors come in a range of contact are ideally suited to back- centerline spacings of .050 plane wiring or any other [1.27] to .156 [3.96]. A wide application requiring the range of dual position sizes circuit connection of one and post styles are avail- printed circuit board to able. One family of connec- another. Designed to tors features zero insertion shorten manufacturing time force of the daughter and reduce applied costs, board, along with a choice these one-step, pre-assem- of actuating devices. A vari- bled connectors are ready ety of housing and contact for mounting and mass materials further expands insertion. the choice of connectors available to meet many Many of the connectors are application requirements. available with the proven and reliable ACTION PIN To help in choosing a con- contact. This unique con- nector for your application, tact has superior electrical a Selection Guide is provid- and physical characteristics ed on pages 4 through 6. that are top of the line in the industry. Standard Edge .050 Series Standard Edge Standard Edge II Connectors PCI Connectors .050 Series Connectors (.100 and .125 Centerline) (Pages 7-10) (Pages 11-14) (Pages 15-27) .350 .368[8.89] [9.35] .155 [3.94].300.300 [7.62][7.62] .610.610 .610 [15.49][15.49] [15.49] ±.020.170 ±0.51.315[4.32]±.020.170 [8.00]±0.51[4.32] Centerlines .050 [1.27]XX .100 [2.54]X .125 [3.18]X .150 [3.81] .156 [3.96] Tail Styles SolderXXX Right-Angle SolderX Wrap-TypeX Card ExtenderX Solder Eyelet Press-Fit Surface-Mount 4 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Selection Guide, Board-to-Board Connectors (Continued) Standard Edge II Cantilever Beam Connectors Cantilever Beam Connectors (.150 Centerline) Standard Housing Connectors Scoop Housing (Pages 15-27) (Pages 28-40) (Pages 28-40) .370.054–.070 [1.37-1.78].390 [9.40] [9.91] .145 .045 .054 to .071.020±.010[3.68].015[1.14][1.37 to 1.80][.51±.25][0.33] .008 .365.300[.203] [9.27][7.62].705.610 [17.91][15.49] .200±.020 [5.08±0.51].395 or .510 [10.03 or 12.95] .135±.020.015 [3.43±0.51][0.41] .200 [.508] Centerlines .050 [1.27] .0625 [1.588] XX.100 [2.54] XX.125 [3.18] X.150 [3.81] XX.156 [3.96] Tail Styles XXXSolder Right-Angle Solder Wrap-Type Card Extender Solder Eyelet XXPress-Fit Surface-Mount Modified Bellows Connector Low Profile Twin Leaf Connectors (Pages 41-56) Mother Board Connectors (Pages 58-63) (Pages 64-72) .368 [9.35] .054-.071 .437 [1.37-1.80].400[11.10].125 [10.16] [3.18].300 [7.62].610.150 [15.49][3.81].460 [11.68] .610 [15.49] .165 [4.19].235 [5.97] .200 [5.08] .025 [.63] Centerlines .050 [1.27] XX.100 [2.54] XXX.125 [3.18] X.150 [3.81] XXX.156 [3.96] Tail Styles XXXSolder XRight-Angle Solder XWrap-Type Card Extender XSolder Eyelet Press-Fit Surface-Mount 5 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Selection Guide, Board-to-Board Connectors (Continued) Rotary Cam ZIF Linear ZIF AMP PACE Connectors, Connectors Connectors Card Scoop Housing (Pages 83-96) (Pages 73-82) (Pages 98-115) .475 [12.07].140 .450 [11.43][3.56] A .440.150 [11.18][3.81] .234.845 [21.46] [5.94].815 [20.70] .645 [16.38] .848 [21.54] .490 [12.45].598 .460 [11.68].370 [9.40][15.19] .130.345 [8.76] [3.30] .100 x .200 = .390[9.91] A.125 x .125 = .420[10.67] .125 x .200 = .420[10.67] Centerlines .050 [1.27] .0625 [1.588] .100 [2.54]XXX .125 [3.18]XXX .150 [3.81] .156 [3.96]X Tail Styles SolderXX Right-Angle SolderX Wrap-TypeXXX Card Extender Solder Eyelet Press-FitXX Surface-Mount AMP PACE Connectors, ECONOMATE High Density Press Fit Connector Standard Housing Connectors For .093 Cards (Pages 98-115) (Pages 119-126) (Pages 128-129) .400 A [10.16] .234 .066[5.94] [1.68] .415.545 [10.54][13.84] .545.181 [13.84][4.60] .610 [15.49].461.421 .130[11.71][10.69] [3.30] .100 x .100 = .380[9.65] .100 x .200 = .360[9.14] A .125 x .250 = .410[10.41] .156 x .200 = .360[9.14] Centerlines .050 [1.27]X .0625 [1.588] .100 [2.54]XX .125 [3.18]X .150 [3.81] .156 [3.96]XX Tail Styles Solder Right-Angle Solder Wrap-TypeX Card Extender Solder Eyelet Press-FitXXX Surface-Mount 6 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series PCI Card Edge Connectors Product Facts nHigh density .050 [1.27] centerline contact spacing nEasy mating of high circuit count daughter boards nPolarizing web for positive board-to-connector registration nChoice of plastic pylons or metal holddowns Connectors that support A key differentiates the sig- Performance Specifications: PCI expansion cards are naling environment voltages. Durability—Tested to 100 mating derived from those on the The same physical connec- cycles MicroChannel Architecture tor is used for the 32 bit sig- Mating Force—8 oz [2.22 N] max. per (MCA) bus. The MCA con- naling environments. In one contact pair nectors are well defined orientation, the key accepts Unmating Force—.5 oz [0.14 N] min. and have proven value and 5 volt boards. When rotated per contact pair reliability. 180°, the connector Contact Resistance—20 milliohms accepts 3.3 volt signaling There are four connectors max. (initial) 30 milliohms max. (final) boards. The pin numbering that can be used depend- Insulation Resistance— of the connector changes ing upon the PCI implemen- 1000 megohms min. for the different signaling tation. The differences Dielectric Withstanding Voltage— environments to maintain between these connectors 500 VAC (at sea level) the same relative position of are 32 bit and 64 bit, and Capacitance—2 picofarads max. signals on the connector. the 5 volt and 3.3 volt sig- Current Rating—1 ampere max. naling environments. PCI-X Voltage Rating—203 VAC is a version of PCI at 133 Thermal Shock— MHz which is under devel- –55°C to +85°C for 5 cycles opment and employs stan- Mixed Flowing Gas—Class II with dard PCI connectors. PCI-X mated board for 20 days is limited to 1 slot versus 4 slots of PCI. Technical Documents: Product Specification 108-14034 Application Specification 114-26012 Qualification Test Report 501-203 7 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series PCI Card Edge Connectors Plastic Pylons 64 Bit, 5 Volt Signaling 92 Dual Positions .350 [8.89]with 3 Plastic Pylons or 3 Metal Holddowns 5.040 [128.02] Material and Finish: Housing—High temperature thermo- .035 .300plastic 94V-0 rated, white35°[0.89] L[7.62](2 Plcs.)(2 Plcs.)Contacts—Phosphor bronze, plated as follows: Plating B—Duplex plated .000015 .610 [0.00038] min. gold in contact area, [15.49] ±.020.000100 [0.00254] min. tin-lead on solder.170 ±0.51[4.32]tails, with entire contact underplated .000050 [0.00127] min. nickel .060Plating C—Duplex plated .000030.075 [1.52]L[0.00076] min. gold in contact area,[1.90]See Note..150 ±.010Typ..150.050W(2 Plcs.)[3.81]Solder Tail C.000100 [0.00254] min. tin-lead on solder[±0.25]L[3.81][1.27] Typ.tails, with entire contact underplated(2 Plcs.)(2 Plcs.).05010 Spaces31 Spaces 48 Spaces at .000050 [0.00127] min. nickel[1.27].050.050 atat [1.27][1.27] Section L-L Related Product Data: Performance Specifications— page 7 Technical Documents: Product Specification 108-14034ThroughSurface Metal Holddowns HoleMountApplication Specification .035 114-26012±.020.17035°[0.89] ±0.51[4.32]L(2 Plcs.)(2 Plcs.) .300.300 [7.62][7.62] .610 [15.49].078 .17+.02 [1.98] [4.318+.508].003See Note.Ref. [.076] .180 .150.075.060.050[4.57].150L[3.81]Solder [1.90][1.52][1.27]±.010[3.81]W(2 Plcs.)Tail C(2 Plcs.)[±0.25]Typ.L(2 Plcs.).180 Typ.[4.57] .05031 Spaces10 Spaces48 Spaces at [1.27].050.050atat [1.27][1.27]Section L-L Part Numbers WContact5 Volt (Post Length)Finish3 Plastic 3 Metal PylonsHolddowns Plating B145166-2—.100 2.54Plating C145166-4145169-4 .125 Plating C145166-8145169-8 3.18 Surface Plating C145113-1— Mount Notes:1.Connectors are supplied with either cored (shown above) or solid side walls. Notes:2.Other connector sizes can be made available, consult Tyco Electronics. 8 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series PCI Card Edge Connectors 32 Bit, 3.3 and 5 Volt Plastic Pylons Signaling .350 [8.89] 60 Dual Positions with 2 Plastic Pylons or 3.340 [84.84] 2 Metal Holddowns Material and Finish:.035±.020.170 35°[0.89]±0.51[4.32]LHousing Y—High temperature thermo-(2 Plcs.)(2 Plcs.) plastic 94V-0 rated, white .300Housing Z—Nylon 6/6, white [7.62] .610Contacts—Phosphor bronze, plated as ±.010[15.49]Wfollows:[±0.25] Typ. Plating A—Duplex plated gold flash in contact area, .000100 [0.00254] min. tin-lead on solder tails, with entire con-.150.050 .060Solder Tail CL[3.81]L[1.27]tact underplated .000050 [0.00127] min.See Note.[1.52] (2 Plcs.)(2 Plcs.) nickel10 SpacesTyp..050 48 Spaces at.050[1.27]atPlating B—Duplex plated .000015.075Section L-L[1.27] [1.90][0.00038] min. gold in contact area, (2 Plcs.) .000100 [0.00254] min. tin-lead on solder tails, with entire contact underplated .000050 [0.00127] min. nickel Plating C—Duplex plated .000030 [0.00076] min. gold in contact area, .000100 [0.00254] min. tin-lead on solder tails, with entire contact underplated .000050 [0.00127] min. nickel Related Product Data: Through Surface Performance Specifications—HoleMount Metal Holddowns.035 page 735°[0.89]±.020.170L(2 Plcs.)(2 Plcs.)±0.51[4.32] .300.300 Technical Documents: [7.62][7.62] .610±.010 WProduct Specification[±0.25][15.49] .078Typ..17+.02108-14034 [1.98][4.318+.508].003 Application SpecificationRef. [.076] 114-26012.180.060L.150See Note.[4.57][1.52].050 [3.81]Solder .050Typ.[1.27] 48 Spaces at(2 Plcs.)Tail C.180L[1.27](2 Plcs.) 10 Spaces[4.57] .050.075 at [1.27][1.90]Section L-L (2 Plcs.) Part Numbers WContactHousing 2 Plastic2 Metal(Post Length)FinishMaterial PylonsHolddowns Plating A145154-1145167-1 .100 YPlating B145154-2— 2.54 Plating C145154-4145167-4 Plating A11299-1—.118 Z 3.00Plating B11299-6— .125 Plating C145154-8—Y 3.18 Surface YPlating C—145098-1 Mount Notes:1.Connectors are supplied with either cored (shown above) or solid side walls. Notes:2.Other connector sizes can be made available, consult Tyco Electronics. 9 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series PCI Card Edge Connectors Plastic Pylons 64 Bit, 3.3 Volt Signaling 92 Dual Positions .350 [8.89] with 3 Plastic Pylons or 3 Metal Holddowns 5.040 [128.02] Material and Finish:.035 35°±.020[0.89].170 (2 Plcs.)Housing—High temperature thermo-±0.51(2 Plcs.)[4.32]L plastic 94V-0 rated, white .300Contacts—Phosphor bronze, plated as [7.62].610follows:±.010 W[15.49] [±0.25] Plating B—Duplex plated .000015 Typ. [0.00038] min. gold in contact area, .000100 [0.00254] min. tin-lead on solder tails, with entire contact underplated .150.050.060Solder Tail CLL.000050 [0.00127] min. nickel.150[3.81][1.27]See Note.[1.52] [3.81](2 Plcs.)(2 Plcs.)31 SpacesTyp.Plating C—Duplex plated .000030 .050.075[0.00076] min. gold in contact area,atSection L-L10 Spaces[1.27][1.90].050 .000100 [0.00254] min. tin-lead on solder48 Spaces at.050(2 Plcs.)[1.27]at tails, with entire contact underplated[1.27] .000050 [0.00127] min. nickel Related Product Data: Performance Specifications— page 7 Technical Documents: Product Specification 108-14034ThroughSurface HoleMountApplication Specification Metal Holddowns 114-26012.035 ±.020.170 [0.89]35°±0.51[4.32] (2 Plcs.)L(2 Plcs.) .300.300 [7.62][7.62] .610 [15.49] See Note..17+.02.078 [4.318+.508].003[1.98] [.076]Ref. .180 L.075.060.150.150[4.57].050[1.90] [1.52]Solder [3.81][3.81]±.010(2 Plcs.)31 Spaces[1.27] W10 SpacesTyp.Tail C[±0.25](2 Plcs.)L.180.050(2 Plcs.).050atTyp.at[4.57][1.27][1.27] .050 48 Spaces atSection L-L[1.27] Part Numbers WContact3.3 Volt (Post Length)Finish3 Plastic 3 Metal PylonsHolddowns Plating B—145168-2.100 2.54Plating C1-145165-4145168-4 .125 Plating C1-145165-8— 3.18 Surface Plating C—145246-1 Mount Notes:1.Connectors are supplied with either cored (shown above) or solid side walls. Notes:2.Other connector sizes can be made available, consult Tyco Electronics. 10 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series Connectors Product Facts nHigh density .050 [1.27] centerline spacing of contacts nEasy mating of high-circuit count daughter boards nCompatible with infrared reflow (IR) soldering techniques nPolarizing web for positive board-to-connector registration nChoice of plastic pylons or metal holddowns nRecognized under the Component Program of Underwriter Laboratories Inc. File No. E28476 nCertified by Canadian Standards Association, ® File No. LR 7189 Performance Specifications: Contact Current Rating* —1 ampere Termination Resistance — 20 milliohms max. (initial) 30 milliohms max. (final) Dielectric Withstanding Voltage — The need to conserve AMP Standard Edge .050 500 VAC min. space and pack more func- Series connectors are ideal Insulation Resistance — 1000 tion into a given area has for fast automated robotic megohms min. demanded that .050 [1.27] assembly with registration Mating Force — .5 oz. [0.14 N] per centerline spacing become features and dimensional contact pair a reality. AMP Standard tolerancing for more accurate Unmating Force — 1 oz. [0.3 N] per Edge .050 Series connec- pickup and placement, and contact pair tors are the ideal vehicle for are packaged in robotics- Durability (Tested to) — 100 mating mother/daughter board compatible trays. cycles applications requiring this Application Temperature — Plastic guide posts or metal real estate. +215°C for 120 seconds max. holddowns align the con- Temperature Range — These rugged connectors nector with the mother board –55°C to +85°C have two rows of contacts and retain it for soldering. on .050 [1.27] centerlines. To make circuit routing easy, Polarizing webs provide connector solder posts are *Consult Tyco Electronicsengi- positive board-to-connector arranged in a four-row .100neering when paralleling con- tacts for power applications.registration, while insertion [2.54] staggered grid. High- force allows even high temperature tolerant mate- circuit-count daughter rials promote that these High Density for DataBus boards to mate easily. The connectors withstand Applications connectors accept .054 to infrared reflow (IR) solder- .070 [1.37 to 1.78] thick ing, while standoffs ease daughter boards and fea- flux cleaning. ture an overstress protected contact design. 11 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series Connectors Configuration; .350 1 Key—2 Plastic Pylons[8.89] Material and Finish: Housing—High temperature thermo- Cplastic, brown Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold in.035 [0.89]contact area, .000100 [0.00254] min.±.020.170 35°L(2 Plcs.)±0.51[4.32]tin-lead on solder tails, with entire con-(2 Plcs.) tact underplated .000050 [0.00127] min. .300nickel [7.62] .610 [15.49] Related Product Data: Performance Specifications— page 11 .012 .060[0.30].075Typ.L[1.52]Typ.W[1.90] (2 Plcs.)(PostTechnical Documents:B Spaces.150Length) A Spaces.050[3.81]at Product Specification.050[1.27](2 Plcs.) at.050 [1.27] 108-14034[1.27] (2 Plcs.) Application Specification Section L-L.016114-26012Typ. [0.41] No. ofWPC BoardDimensionsConnector Dual(PostHole Part NumbersABCPositionsLength)Layout 1.490.100 231011A0-650090-7 37.852.54 1.840.100 301018B0-650090-6 46.742.54 .100 B0-650090-3 2.542.340 401028 59.44.140 B0-650181-2 3.56 2.590.100 451033A0-650090-2 65.792.54 .10011B0-650090-1 2.543.140 561044 79.76.140 B0-650181-1 3.56 4.340.100 803741C0-650090-9 110.242.54 .10012A0-650092-1 4.8902.54 914148 124.21.140 A0-650092-2 3.56 1 Connector used for VLLocal Bus and MCA Bus applications. 2 Connector used for MCA Bus applications. Notes:1.Other connector sizes can be made available, consult Tyco Electronics. 2..125 [3.18] post length is available, consult Tyco Electronics. 12 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series Connectors Configuration; 1 Key—2 Plastic Pylons .350 [8.89] Material and Finish: Housing—High temperature thermo- Dplastic, brown Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold in contact area, .000100 [0.00254] min..035 ±.020.170 tin-lead on solder tails, with entire [0.89]35° ±0.51L[4.32] (2 Plcs.)(2 Plcs.)contact underplated .000050 [0.00127] min. nickel .300 [7.62] .610 [15.49] Related Product Data: Performance Specifications— page 11 .060.075 LTyp..012 [1.52][1.90]C Spaces W[0.30] B Spaces(2 Plcs.).050 Technical Documents:(PostTyp.at.050[1.27] Length)at.150 [1.27].150A SpacesProduct Specification[3.81].050[3.81].050(2 Plcs.)at[1.27]108-14034[1.27] (2 Plcs.) Application Specification Section L-L 114-26012 .016.096Typ.Dia. Max.[0.41][2.44] No. ofWPC BoardDimensionsConnector Dual(PostHole Part NumbersABCDPositionsLength)Layout .100 1A650091-1* 2.543.740 6610449 95.00.140 A650091-2 3.56 *Connectors used for MCA Bus applications. Notes:1.Other connector sizes can be made available, consult Tyco Electronics. 2..125 [3.18] post length is available, consult Tyco Electronics. 13 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type Board-to-Board) Standard Edge .050 Series Connectors Configuration; .350 1 Key/1 Web —3 Metal [8.89] Holddowns 120 Dual Positions6.440 [163.58] .035 35°[0.89] (2 Plcs.)Material and Finish:(2 Plcs.) L Housing—High temperature thermo- .300plastic, brown [7.62] Holddowns—Brass, plated .000150.610 [15.49][0.00381] min. tin-lead over .000050±.020.170 ±0.51[0.00127] min. nickel[4.32] Contacts—Phosphor bronze, duplex .180plated .000030 [0.00076] min. gold in [4.57] contact area, .000100 [0.00254] min.L.060 .075Typ. [1.52]W.150tin-lead on solder tails, with entire [1.90] (Post[3.81]63 Spaces(2 Plcs.)contact underplated .000050 [0.00127]Length).050.050.150Solder Tail CatL[1.27]min. nickel[1.27]44Spaces[3.81]10Spaces(2 Plcs.) (2 Plcs.).050.050 atat [1.27][1.27] Section L-L Related Product Data: Performance Specifications— page 11 Technical Documents: No. ofWConnector Dual(PostPartProduct Specification PositionsLength)Numbers 104-14034 .140 120145031-3Application Specification3.56 114-26012 Note:Other connector sizes can be made available, consult Tyco Electronics. Configuration; End Key .096 .016 [2.44]Material and Finish:Typ. [0.41] Dia. Housing—High temperature thermo-Max. plastic, brown .350 Contacts—Phosphor bronze, duplex[8.89] plated .000030 [0.00076] min. gold in .099 contact area, .000100 [0.00254] min. [2.52] tin-lead on solder tails, with entire con-BMax. tact underplated .000050 [0.00127] min. .035 ±.020.170nickel[0.89]L35°±0.51[4.32] .300Related Product Data: [7.62] .610Performance Specifications— [15.49] page 11 Technical Documents: .012 .060Typ. Typ.[0.30]Product SpecificationL[1.52] .050Post Length.075108-14034.150[1.27]ASpaces[1.90] [3.81](2 Plcs.)Application Specification.050 at(2 Plcs.)[1.27] 114-26012 Section L-L No. ofDimensions DualPostConnector ABCDPositionsLengthPart Numbers 1.4801.3501.310.100 2524650719-1 37.5934.2933.272.54 Note:Other connector sizes can be made available, consult Tyco Electronics. 14 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors Product Facts nMaximum number of dual positions .100 [2.54] Centerlines-70, .125 [3.18] Centerlines-50, .150 [3.81] Centerlines-31 nSelective gold plating of contacts for high perfor- mance at low cost n.025 [0.64] square solid posts meet standard wrap- type specifications nFor flow solder applications nGlass-filled polyester housing is 94V-0 rated nAccepts double sided PC boards, .054-.070 [1.27-1.78] thick nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 nCertified by Canadian Standards Association, File No. LR 7189 Performance Specifications Contact Rating*: 3 amperes continuous (UL and CSA) Contact Resistance: 10 milliohms AMP Standard Edge II Right-angle connectors are Precision formed phosphor max. Connectors provide high also available with contacts bronze contacts are selec- reliability and economy in arranged on .100 [2.54] tively gold plated. Phosphor Operating Temperature: –55°C to +85°C packages compatible with centers, .150 [3.81] bronze has excellent industry standards for dou- row-to-row or .200 [5.08] strength characteristics Voltage Rating (Sea Level): ble sided printed circuit row-to-row. which help the connector .100 [2.54] centerline—1000 VAC (test) boards. absorb load deflection .125 [3.18] centerline—1500 VAC (test) Card extenders with con- .150 [3.81] centerline—1500 VAC (test) movement of a PC board Tyco Electronics offers tacts on .100 [2.54] and while maintaining sufficient Insulation Resistance: 5000 Standard Edge II .125 [3.18] centers also are contact force for good elec- megohms min., after exposure to Connectors with or without available. trical connection. Bifurcated humidity mounting ears, for rack cantilever beam contacts Vibration Tolerance: 10 to 500 hertz mounting and soldering. provide redundant contact. Contacts are arranged on Contact Engagement Force: 12 oz .100 [2.54] centers, .125 [3.3 N] average per pair with .062 [1.57] [3.18] centers, .150 [3.81] PC board centers, .200 [5.08] Contact Separation Force: 2 oz row-to-row; and .250 [6.35] [0.6 N] average per pair with .062 [1.57] row-to-row. PC board Humidity Tolerance: 90%-95% for 96 hours *Consult Tyco Electronics engi- neering when paralleling con- tacts for power applications. 15 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors Styles .100 [2.54] Centerline Right-Angle Posts .100 [2.54] and .125 [3.18] Centerline Solder Posts with Low and No Mounting Ears without Mounting Ears Page 23 Pages 17 and 18 .100 [2.54] and .125 [3.18] Centerline Solder Posts with Low and Mid-High Mounting Ears Page 20 .100 [2.54] and .125 [3.18] Centerline Wrap-Type Posts with Mid-High Mounting Ears .100 [2.54] Centerline Solder Posts with Board Page 21 Retention Feature, without Mounting Ears Page 24 .100 [2.54] and .125 [3.18] Centerline .150 [3.81] Centerline Solder Posts (with Board Card Extenders Retention Feature), without Mounting Ears Page 22 Page 19 16 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Card Edge Connectors .064[1.63] Sq. .100 [2.54] Centerline, x .130[3.30] Dp. Vertical Solder Posts, Intercontact Key Slot .064[1.63] Sq.Without Mounting Ears x .130[3.30] Dp. Material and Finish: Housing—Black glass-filled polyester,.141/.153 .100 D.368[3.58/3.88]94V-0 rated[2.54] [9.35]C**Retention Feature Contacts—Phosphor bronze, duplex (Open End Card Slot) plated as follows: Accepts Plating A—.000030 [0.00076] gold in A.054/.070 .295contact area, tin on posts, with entire[1.37/1.77] [7.49]PC Boardcontact nickel underplated Plating B—.000015 [0.00038] gold in .550.610contact area, tin on posts, with entire [13.97][15.49].155contact nickel underplated [3.94] Plating C—Gold flash in contact area, tin on posts, with entire contact nickel .100 underplatedTyp.Post.060[2.54] .191LengthB[1.52] [4.85] Technical Documents: Product Specification 108-9039 No. ofDimensionsPart NumbersPost Dual Length*ABC**DPlating APlating BPlating CPositions .560.450Open.200 113.1250-650263-1—— 14.2211.43End5.08 .860.750.700.500.1257-530843-5 6—— 21.8419.0517.7812.70.1877-530843-6Intercontact Keying Plug 1.2601.1501.100.900.1255-530843-0 10——Material:32.0029.2127.9422.86.1874-530843-9 1.4601.3501.3001.100Natural color polyester12.1250-530843-1—— 37.0834.2933.0227.94 1.7601.6501.6001.400 15.1250-530843-2—— 44.7041.9140.6435.56 1.9601.8501.8001.600 17.1255-530843-3—— 49.7846.9945.7240.64 2.0601.9501.9001.700 1118.1250-530843-32-530843-7176137-1 52.3249.5348.2643.18 2.2602.1502.1001.900 20.1255-530843-4—— 57.4054.6153.3448.26 2.4602.3502.3002.100 22.1250-530843-4——Part Number 650025-262.4859.6958.4253.34 (.100[2.54] Centerline) 2.7602.6502.6002.400 25.1250-530843-5—— 70.1067.3166.0460.96 3.0602.9502.9002.700 28.1250-530843-6—— 77.7274.9373.6668.58 3.2603.1503.1002.900.1250-530843-7 30—— 82.8080.0178.7473.66.1871-530843-8 3.3603.2503.2003.000 31.1256-530843-57-530843-0— 85.3482.5581.2876.20 3.8603.7503.7003.500 36.1250-530843-8—— 98.0495.2593.9888.90 4.2604.1504.1003.900 40.1872-530843-0—— 108.20105.41104.1499.06 5.2605.1505.1004.900 50.1251-530843-1—— 133.60130.81129.54124.46 **Metric equivalent for post lengths are .125= 3.18; .187= 4.75. **Cdimension is card slot length. 1 Connectors with Retention Feature. Notes: 1. Other connector sizes can be made available, consult Tyco Electronics. 2. High temperature IR reflow compatible connectors can be made available, consult Tyco Electronics. 17 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) .064[1.63] Sq. .125 [3.18] Centerline, x .130[3.30] Dp. Intercontact Key Slot Vertical Solder Posts, .064[1.63] Sq. Without Mounting Earsx .130[3.30] Dp. Material and Finish: Housing—Black glass-filled polyester,.125.368 D [3.18]94V-0 rated[9.35] .191/.203C** [4.85/5.16]Contacts—Phosphor bronze, plated with .000030 [0.00076] gold in contactRetention Feature area, tin on posts, with entire contact nickel underplated Accepts .295A.054/.070Related Product Data: [7.49][1.37/1.77] PC BoardPerformance Specifications— page 15 .550PC Board Hole Layout—page 26.610 [13.97][15.49] PC Board Edge Pattern—page 27.155 [3.94] Special Application—page 96 .125 Post Technical Documents:[3.18].241.060Length B[6.11](pages 186, 187):[1.52] Product Specification 108-9039 Intercontact Keying Plug Material: No. ofDimensionsPost DualPart NumbersNatural color polyesterLength*ABC**DPositions 1.035.875.875.62516.125650207-1 26.2922.2222.2215.88 2.0351.8751.8751.625 14.1875-530844-8 51.6947.6247.6241.28 2.5352.3752.3752.125 18.1871-530844-5 64.3960.3360.3353.98 3.0352.8752.8752.625 22.1871-530844-6 77.0973.0373.0366.68 3.7853.6253.6253.375 28.1871-530844-7 96.1492.0892.0885.73 4.0353.8753.8753.625 30.1871-530844-8 Part No. 650025-1102.4998.4298.4292.08 (.125[3.18] Centerline)4.7854.6254.6254.375 36.1871-530844-9 121.54117.48117.48111.13 5.2855.1255.1254.875 40.1872-530844-0 134.24130.18130.18123.82 5.6605.5005.5005.250 43.1251-530844-0 143.76139.70139.70133.35 6.5356.3756.3756.125.1251-530844-1 50 165.99161.93161.93155.58.1872-530844-2 **Metric equivalent for post lengths are .125= [3.18]; .187= [4.75] **Cdimension is card slot length. 1Connector with Retention Feature. Note:Other connector sizes can be made available, consult Tyco Electronics. 18 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) .045[1.14]Card Slot Accepts .150 [3.81] Centerline, Contact.054-.070[1.37-1.78] ±.010 BAreaVertical Solder Posts,Printed Circuit Board [±0.25]Inter-Contact .015 Retention Feature, WithoutKeying Slot [0.38] Mounting Ears+.005 .432.305-.010 [10.97][9.27]+0.13 .080Material and Finish:-0.25 [.203] Housing—Black glass-filled polyester,Lead in .200±.020 Area94V-0 rated[5.08±0.51] Contacts—Phosphor bronze, plated.016 [0.41] .035±.020 with .000030 [0.00076] gold in contact.020[0.51] [3.430±0.51] area, tin on posts, with entire contact .200nickel underplated [5.08] Related Product Data: Performance Specifications— .600 page 15 [15.21] PC Board Hole Layout—page 26 PC Board Edge Pattern—page 27 Special Application—page 96.0250.143–.161.024 [0.61] [0.63][3.63–4.03].020[0.51] .150 Spaces at = Dim A Ref. [3.81] No. ofDimensionsRetentionPartPost Dual LocationNumbersLength*ABPositions 1.6501.9207-10, 12.1351-650728-2 41.9148.7715-18 2.7002.9707-10, 19.1351-650728-9 68.5875.4429-32 4.0504.3207-10, 28.1352-650728-9 102.87109.7325-32,47-50 4.5004.7707-10, 31.1353-650728-1 114.30121.1627-34,53-56 **Metric equivalent for post length is .135= [3.43] **Cdimension is card slot length. Note:Other connector sizes can be made available, consult Tyco Electronics. 19 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) .064[1.63] Sq..064[1.63] Sq. .100 [2.54] and .125 [3.18] .150x .130[3.30] Dp.x .130[3.30] Dp. Intercontact Key Slot[3.81]Centerline, Vertical Solder Posts, Low and Mid-High Mounting Ears G.300.128 Material and Finish:Dia.HD.368[7.62][3.25] [9.35]C**Housing—Black glass-filled polyester, Accepts94V-0 ratedF .054/.070.360 Contacts—Phosphor bronze, platedA[1.37/1.77][9.14] .295PC Boardwith .000030 [0.00076] gold in contact [7.49] area, tin on posts, with entire contact .550nickel underplated.610 [13.97] [15.49].155 [3.94] Related Product Data: .250 Performance Specifications—[6.35] page 15 .060 JPostB[1.52]PC Board Hole Layout—page 26 LengthE PC Board Edge Pattern—page 27.180 Low Mounting Ears [4.57]Special Application—page 96 Technical Documents: (pages 186, 187): Product Specification 108-9039.250 .141/.153 [6.35] [3.58/3.88] Retention FeatureIntercontact Keying PlugsMid-High Mounting Ears Material: .100 [2.54] Centerline No. ofDimensionsNatural color polyesterPostPart Dual Length*NumbersABC**DEFGHJPositions 1.7601.6501.6001.4002.3852.075.100.100.191 15.1250-530841-244.7041.9140.6435.5667.1852.712.542.544.85 2.0601.9501.9001.7002.6452.375.100.100.191 18.1250-530841-3 52.3249.5348.2643.1867.1860.322.542.544.85 2.7602.6502.6002.4003.3453.075.100.100.191.1250-530841-5 25 70.1067.3166.0460.9684.9678.112.542.544.85.1871-530841-6 3.2603.1603.1002.9003.8453.575.100.100.191 30.1871-530841-8 82.8080.0178.7473.6697.6690.812.542.544.85 3.8603.7503.7003.5004.4454.175.100.100.191 36.1250-530841-8 98.0495.2593.9888.90112.90106.212.542.544.85 Part No. 650025-2.191.1251-530841-1 4.85.1872-530841-25.2605.1505.1004.9005.8455.575.100.100(.100 [2.54] Centerline)50 133.60130.81129.54124.46148.46141.602.542.54.141-.1531.1250-650718-1 3.58-3.88 **Metric equivalent for post lengths are .125= [3.18]; .187= [4.75] **Cdimension is card slot length. 1Connector with Retention Feature. 2Connector with Mid-High Mounting Ears. Note:Other connector sizes can be made available, consult Tyco Electronics. .125 [3.18] Centerline No. ofDimensionsPostPart Dual Length*NumbersABC**DEFGHJPositions 1.035.875.875.6251.5551.295.125.125.241 6.1251-531341-3 26.2922.2222.2215.8839.5032.893.183.186.11 .241 .1871-530842-7 6.113.7853.5053.6253.3754.3054.045.125.125 28 96.1489.0392.0885.73109.35102.743.183.18.24122.1873-531341-0 6.11 6.5356.2556.3756.1257.0556.795.125.125.241 50.1251-530842-1165.99158.88161.93155.58179.20172.593.183.186.11 Part No. 650025-1 **Metric equivalent for post lengths are .125= [3.18]; .187= [4.75](.125 [3.18] Centerline) **Cdimension is card slot length. 1Connector with Retention Feature. 2Connector with Mid-High Mounting Ears. Note:Other connector sizes can be made available, consult Tyco Electronics. 20 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 , 2 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) .064[1.63] Sq..100 [2.54] and .125 [3.18] .064[1.63] Sq.x .130[3.30] Dp. .150Centerline, Vertical Wrap-x .130[3.30] Dp. Intercontact Key Slot[3.81] Type Posts, Mid-High Mounting Ears Material and Finish: .300 G.128.368Dia.[7.62]Housing—Black glass-filled polyester,[3.25] [9.35] HD94V-0 rated CContacts—Phosphor bronze, plated Fwith .000030 [0.00076] gold in contact area, tin on posts, with entire contact nickel underplatedAccepts .054/.070 .180.295[1.37/1.77] A[4.57][7.49]PC Board Related Product Data: Performance Specifications— page 15.550.610.250 [13.97][15.49][6.35] PC Board Hole Layout—page 26.155 [3.94] PC Board Edge Pattern—page 27 Special Application—page 96 .060 [1.52] Technical Documents: B Post (pages 186, 187): ELength JProduct Specification 108-9039 Intercontact Keying Plugs Material: Natural color polyester .100 [2.54] Centerline No. ofDimensionsPostPart Dual Length*NumbersABC**DEFGHJPositions 3.2603.1503.1002.9003.8453.575.100.100.200 30.5703-530396-3 82.8080.0178.7473.6697.4190.802.542.545.08 3.8603.7503.7003.5004.4354.175.100.100.200 36.5703-530396-4 98.0495.2593.9888.90112.65106.042.542.545.08 Part No. 650025-24.2604.1504.1003.9004.8454.575.100.100.200 40.5703-530396-4 (.100 [2.54] Centerline)108.20105.41104.1499.06123.06116.212.542.545.08 **Metric equivalent for post length is .570= [14.48]. **Cdimension is card slot length. Note:Other connector sizes can be made available, consult Tyco Electronics. .125 [3.18] Centerline No. ofDimensionsPostPart Dual Length*NumbersABC**DEFGHJPositions 3.0352.7552.8752.6253.5553.295.125.125.250 22.5704-530825-5 77.0969.9873.0266.6790.3083.693.183.186.35 **Metric equivalent for post length is .570= [14.48]. **Cdimension is card slot length. Note:Other connector sizes can be made available, consult Tyco Electronics. Part No. 650025-1 (.125 [3.18] Centerline) 21 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) .064[1.63] Sq. .100 [2.54] and .125 [3.18].064[1.63] Sq. x .130[3.30] Dp..128 x .130[3.30] Dp.Dia. Centerlines, Card Extender[3.25] Intercontact Key Slot Contacts Material and Finish:.368 [9.35] Housing—Black glass-filled polyester, 94V-0 rated .300 .150Contacts—Phosphor bronze, plated[7.62]G [3.81].180with .000030 [0.00076] gold in contactDH [4.67] area, tin on posts, with entire contact C nickel underplated Related Product Data: Performance Specifications— E page 15 PC Board Hole Layout—page 26FAccepts .054/.070.295 PC Board Edge Pattern—page 27.180 [1.37/1.77][7.49]A[4.57] PC Board Technical Documents: (pages 186, 187): .550Product Specification.610 [13.97][15.49]108-9039.155 [3.94] Mounting Block .250Material: .060[6.35] [1.52]Natural color nylon .062 Dia. [1.57] .340B Roll Pin[8.63] Fits .054/.070 Card Extender [1.37/1.77] Connector PC Board Housing Ref. #5 Self Tapping Screws .100 [2.54] Centerline No. ofDimensions MountingDualPart Numbers ABC**DEFGHBlockPositions 5.2605.1605.1004.9005.8455.575.100.100 50530826-3.062133.60130.81129.54124.46148.46141.602.542.54 [1.57] *Cdimension is card slot length.PC Board Ref. 1Kit Part No.531250-4No mounting ears. Each kit includes 2 mounting blocks,Note:Other connector sizes can be made available, consult Tyco Electronics. 2 self tapping screws, #5 x .437 [11.10] and 2 roll pins, .075 x .250 [1.57 x 6.35] Intercontact Keying Plugs Material: Natural color polyester .125 [3.18] Centerline No. ofDimensions DualPart Numbers ABC**DEFGHPositions 4.7854.5054.6254.3755.0355.045.125.125 36530384-2 121.54114.43117.48111.13134.75128.143.183.18 *Cdimension is card slot length. Part No. 650025-1 Note:Other connector sizes can be made available, consult Tyco Electronics. (.125 [3.18] Centerline) Part Number 650025-2 (.100[2.54] Centerline) 22 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Card Edge Connectors .100 [2.54] Right-Angle Accepts .064[1.63] Sq..064[1.63] Sq..054/.070Solder Posts, with Low and x .130[3.30] Dp.x .130[3.30] Dp.Intercontact Key Slot[1.37/1.77] No Mounting EarsPC Board .295 [7.49] Material and Finish: .155 Housing—Black glass-filled polyester, [3.94].300 94V-0 rated.368.100G[7.62] [9.35][2.54]Contacts—Phosphor bronze, duplex .100D plated as follows:[2.54] CPlating A—.000030 [0.00076] gold inPost Lengthcontact area, tin on posts, with entire contact nickel underplatedWith Board Locks Plating B—.000015 [0.00038] gold in contact area, tin on posts, with entire contact nickel underplatedE Accepts .054/.070F [1.37/1.77].295 Related Product Data:PC Board[7.49]A Performance Specifications— page 15 .550 .610 [13.97] [15.49] G.155Technical Documents: [3.94] Product Specification .250.080108-9039.128 [6.25]Dia.[1.82] [3.25] B Post Length Low Mounting Ears Low Mounting Ears Intercontact Keying Plug Material:No. ofDimensionsPostPart Numbers Dual 21Length(Plating A)ABC*DEFGNatural color polyesterPositions 1.4601.3501.3001.1002.0451.775x.100x 3312.090145089-1 37.0834.2933.0227.9451.9445.08.150 2.0601.9501.9001.7002.6452.375x.100x 18.090645384-1 52.3249.5348.2643.1867.1860.32.150 2.2602.1502.1001.9002.8452.575x.100x 20.090645384-3 57.4054.6153.3448.2672.3065.40.150 *Cdimension is card slot length. 1 Metric equivalent for .100 x .150and .100 x .200are [2.54 x 3.81] and [2.54 x 5.08]. 2 Metric equivalent for post length is .090= [2.27]. Part Number 650025-2 3 Connector with Board Locks. (.100[2.54] Centerline) Note:Other connector sizes can be made available, consult Tyco Electronics. No Mounting Ears No. ofDimensionsPart NumbersPost Dual2Length1ABC*DGPlating APlating BPositions 1.7601.6501.6001.400.100x 15.090650118-1— 44.7041.9140.6435.56.150 1.9601.8501.8001.600.100x 17.090650187-1— 49.7846.9945.7240.64.200 2.7602.3502.6002.400.100x 25.090—532600-2 70.1067.6166.0460.96.150 3.3603.2503.2003.000.100x 31.090—532600-4 85.3482.5581.2876.20.150 3.4603.3503.3003.100.100x 32.090—532600-5 87.8885.0983.8278.74.150 2.1602.7502.7001.800.100x 19.090—532600-6 54.8669.8568.5845.72.150 *Cdimension is card slot length. 1 Metric equivalent for .100 x .150and .100 x .200are [2.54 x 3.81] and [2.54 x 5.08]. 2 Metric equivalent for post length is .090= [2.27]. Notes: 1. Other connector sizes can be made available, consult Tyco Electronics. 2. High temperature IR reflow compatible connectors can be made available, consult Tyco Electronics. 23 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Card Edge Connectors .100 [2.54] Centerline Vertical Solder Posts,.064[1.63] Sq. x .130[3.30] Dp. Retention Feature, Intercontact Key Slot Without Mounting Ears .064[1.63] Sq. .368Material and Finish: x .130[3.30] Dp. [9.35] Housing—Black glass-filled polyester, 94V-0 rated .100 DContacts—Phosphor bronze, duplex[2.54] Cplated as follows: Plating A—.000030 [0.00076] gold in contact area, tin on posts, with entire contact nickel underplated Plating B—.000015 [0.00038] gold in contact area, tin on posts, with entire AcceptsA contact nickel underplated.054/.070.295 [1.37/1.77][7.49]Plating C—Gold flash in contact area, PC Board tin on posts, with entire contact nickel underplated .550 .610 [13.97] [15.49] .155 Technical Documents: [3.94] Product Specification 108-9039.060 Post[1.52].191 Length [4.85].100 Typ. [2.54] B Intercontact Keying Plug Material: Natural color polyester .141/.153 [3.58/3.88] Retention Feature Part Number 650025-2 No. ofDimensionsPartNumbersPostRetention(.100[2.54] Centerline) Dual Length*FeatureABC**DPlating APositions 2.0601.9501.9001.700 18.1253-6, 31-341-645235-4 52.3249.5348.2643.18 3.3603.2503.2003.0003-6, 29-32 or 31.1251-645235-1 85.3482.5581.2876.2031-34, 57-60 5.2605.1505.1004.9003-6, 49-52, 50.1251-645235-3 133.60130.81129.54124.4695-98 6.2606.1506.1005.9003-6, 55-58, 60.1251-645235-8 159.00156.21154.94149.8663-66, 115-118 **Metric equivalent for post length is .125= [3.18]. **Cdimension is card slot length. Notes: 1. Other connector sizes can be made available, consult Tyco Electronics. 2. High temperature IR reflow compatible connectors can be made available, consult Tyco Electronics. 24 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Card Edge Connectors .100 [2.54] Centerline, Special 18/31 Dual Combination Connector,.100.200 [2.54][5.08]Vertical Solder Posts, .368Without Mounting Ears [9.35] .100 [2.54]1.9003.200.141/.153Material and Finish: [48.26][81.28][3.58/3.88] Housing—Black glass-filled polyester, Retention Feature94V-0 rated, except where noted Contacts—Phosphor bronze, plated5.460Accepts with .000030 [0.00076] gold in contact[138.68].054/.070 area (except where noted), tin on posts,[1.37/1.77].295 PC Board[7.49]with entire contact nickel underplated .550 .610 [13.97] [15.49] Technical Documents: Product Specification.400 108-9039[10.16].060 .191[1.52] [4.85]AA Solder Posts 5.350 [135.89] Intercontact Keying Plug Material: Natural color polyester No. of PostDimensionRetention DualPart Numbers TypeAFeature Positions .1253-6, 41, 42,645169-2 52Solder Posts113.1851, 52, 93-96536128-1 .125Part Number 650025-252Solder PostsNone645169-3 3.18(.100[2.54] Centerline) .1253-14, 41, 42, 52Solder Posts645169-4 3.1851, 52, 85-96 .1255, 6, 31, 32,2252Solder Posts176139-1 23.1841, 42, 93, 94 .187 52Solder PostsNone650616-1 4.75 1 Housing material is high temperature glass-filled polyester, gray. 2 Contact area is gold flash. Notes:1. Card slot length is 5.300[134.62]. 2. Other connector sizes can be made available, consult Tyco Electronics. 3. High temperature IR reflow compatible connectors can be made available, consult Tyco Electronics. 25 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) Vertical Post Connectors Recommended PC Board Hole Layouts DB ±.003 CDia.[±0.08] .128 Dia. [3.25] A F Dimensions Connector Type ABCDF .100.200.040 Solder Post/RetentionSee Note 1See Note 2 2.545.081.02 .150.200.040 Solder Post/RetentionSee Note 4See Note 2 3.815.081.02 .125.250.040 Solder Post, Mounting EarsSee Note 3See Note 3 3.186.351.02 .100/.125.200/.250.040 Solder Post, W/O Mounting EarsSee Note 4See Note 2 2.54/3.185.08/6.351.02 .100.200.042 Wrap-Type PostSee Note 5See Note 5 2.545.081.07 .125.250.042 Wrap-Type PostSee Note 5See Note 5 3.186.351.07 Notes:1.Refer to page 24 for DDimensions and Dual Positions. 2.No mounting ears. Dimensions do not apply. 3.Refer to page 20 for Dand FDimensions and Dual Positions. 4.Refer to pages 18 and 19 for DDimensions and Dual Positions. 5.Refer to page 21 for Dand FDimensions and Dual Positions. Right-Angle Post Connectors F D B .128 Dia. [3.25] A ±.003 CDia.[±0.08] G .337 [8.56] Dimensions Connector Type ABCDFG .100.150.042.137 Right-Angle Posts, Mounting EarsSee Note 1See Note 1 2.543.811.073.48 .100.150 or .200.042 Right-Angle Posts, No Mounting EarsSee Note 2See Note 3See Note 3 2.543.81 or 5.081.07 Notes:1.Refer to page 23 for Dand FDimensions and Dual Positions. 2.Refer to page 23 for DDimensions and Dual Positions. 3.No Mounting Ears, Dimensions do not apply. 26 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Standard Edge II Connectors (Continued) PC Board Edge Pattern for Recommended .100 [2.54] and .125 [3.18] PC Board Edge Pattern Centerline .050 Datum C[1.27]L Intercontact Key Slot .015 x 45° [0.38] Chamfer .295 Min. [7.49] .310 Min. Engagement Depth[7.87] B .054/.070 ±.005 AD[1.37/1.77][±0.13] ±.005 C[±0.13] .100 [2.54] Centerline.125 [3.18] Centerline No. ofA = .093 [2.36]A = .118 [3.00] DualB = .050 [1.27]B = .075 [1.90] Positions CDCD .386.200 3—— 9.805.08 .686.500.861.625 6 17.4212.7021.8715.88 1.086.9001.3611.125 10 27.5822.8634.5728.58 1.2861.100 12—— 32.6627.94 1.3861.200 13—— 35.2030.48 1.8611.625 14—— 47.2741.28 1.5861.400 15—— 40.2835.56 1.7861.600 17—— 45.3640.64 1.8861.7002.3612.125 18 47.9043.1859.9753.98 2.2862.1002.8612.625 22 58.0653.3472.6766.68 2.5862.400 25—— 65.6860.96 2.8862.7003.6113.375 28 73.3068.5891.7285.73 3.0862.9003.8613.625 30 78.3873.6698.0792.08 3.1863.0003.9863.750 31 80.9276.20101.2495.25 3.5863.400 35—— 91.0886.36 3.6863.5004.6114.375 36 93.6288.90117.12111.13 4.0863.9005.1114.875 40 103.7899.06129.82123.82 4.3864.2005.4865.250 43 111.40106.68139.34133.35 5.0864.9006.3616.125 50 129.18124.46161.57155.58 6.0865.900 60—— 154.58149.86 7.0866.900 70—— 179.98175.26 27 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series Card Edge Connectors Product Facts nDouble readout Card Edge connectors use dip solder contacts nLarge lead-in chamfers allow easy PC board installation nInsulator standoffs prevent solder from wicking nVarious lengths for custom applications nContact option, single or dual row Cantilever BeamDescription Design Advantages The Cantilever Beam Card The Cantilever Beam Series • Circuit Integrity: Robust Edge connector comes with products from Tyco cantilever contacts are standard high temperature Electronics are double designed to promote plastic insulators. Contacts readout cardedge optimal normal forces at are available in a variety of connectors, using dip the lowest possible cost. lengths to accommodate solder contacts. Tooled for Our uniquely contoured various custom applica- flexible manufacturing, contact mating surface tions. Standoffs allow for these Card Edge gives you constant cleaning and draining and connectors are readily engagement, even when are available as an option available in a broad subjected to continuous on most insulator bodies. assortment of sizes and vibration. mounting styles. Our Cantilever Beam Card Edge • Ease of Assembly: connectors meet industry offers a variety of card slot Generous lead-in cham- standards. depths. A full scoop option fers let your P.C. board is available for ease of slide easily into the con- installation in applications nector. Insulator standoffs where visibility is limited. are provided to facilitate cleaning and prevent sol- Contact options vary in this der from wicking. series from dual row stan- dard contacts, single row Availability, flexibility, per- options and press-fit. formance and very low cost make the Cantilever Series from Tyco Electronics the clear choice in Card Edge connectors. 28 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series Connectors .100 x .200 [2.54 x 5.08] Centerline Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 nCertified by Canadian Standards Association, File No. LR49571 .020±.010 Contact Gap [.51±.25] .145 .300Physical Properties:Card Slot Depth[3.68] [7.62] Insulation Resistance—5000 megohms minimum. Insertion/Withdrawal Force .13 (Daughter Card)—8 oz./2 oz. [3.30] [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade..200 [5.08]Insulator Body—Glass filled thermoplastic, UL rating 94V-O. High temp. plastic option is available; add .400 suffix M399 to part number. [10.16] Color—Black 1.7003.000Contacts—High strength copper alloy. [43.18][76.20] Contact Plating—.000050 [0.00127] .100 .200nickel underplate with .000030[2.54] [5.08] [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum .040±.003 Dia. [1.02±.080] Electrical Properties: Operation Voltage—600 VDC 5.460 (sea level)[138.68] 5.300Current Rating—3 Amperes [134.62] Initial Contact Resistance—1.9003.200 3.70 10 milliohms[48.26][81.28] [9.40] Environmental Properties: Operating Temperature— -55˚C to +125˚C .200 .100Ref.Temperature Cycling—Ref.[5.08] [2.54] MIL-STD-202 method 1075.100 .300[129.54] [7.62] .610 [15.49] .06 [1.52] .06.100 Typ. [1.52][2.54] Ordering Information Acquired Part Number C8D52DS29C1M191– Insulator with molded-in polarizing key with card guide chamber. The card slot lengths are 1.900 [48.26] and 3.200 [81.28]. Includes retention tails for .062 [1.57] PCB to hold connectors securely during handling. C8D52DS29C1M195– Same as above. No retention tails. 29 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series Connectors .100 x .200 [2.54 x 5.08] Centerline Dip Solder Tails, .300 [7.62] Card Slot Depth Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 nCertified by Canadian Standards Association, File No. LR49571 D E.020±.010 Contact GapPhysical Properties:[.51±.25] Insulation Resistance—5000 .145 .300megohms minimum.[3.68]Card Slot Depth [7.62] Insertion/Withdrawal Force.370 [9.40](Daughter Card)—8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. J .100 Insulator Body—Glass filledTyp. [2.54] .200 thermoplastic, UL rating 94V-O. High [5.08] temp. plastic option is available; addB suffix M399 to part number. Color—Black A Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127]C nickel underplate with .000030.250 [6.35][0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum .610 Electrical Properties:[15.49] Operation Voltage—600 VDC (sea level) .180.060Current Rating—3 Amperes [4.57][1.52] Initial Contact Resistance— .02010 milliohmsTyp. Dia. [0.51] E Environmental Properties: Operating Temperature— -55˚C to +125˚CDim B Temperature Cycling— Dim E MIL-STD-202 method 107.040±.003 Dia..128[1.02±.08] Dia.Vibration—MIL-STD-202 method 204[3.25] Related Product Data: Daughter Card Edge Pattern—.200 [5.08]page 57 .100 [2.54] Mounting Styles .125 Dia.#4-40[3.18] .125 Dia. [3.18] .250.250 [6.35][6.35] Centered Mounting EarCentered Mounting EarFlush Mounting Ear Flush Mounting Ear No Mounting Ears .125 [3.18] Thru Hole4-40 Threaded Insert.125 [3.18] Thru Hole4-40 Threaded Insert 30 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information -wooRt-wo R8]5.0 [0"20/ .e linerten C]42.5["00 .1 snioOtpar EgintnuMo of. oN shluF ar EgintnuMoar EgintnuMoar EgintnuMoar EgintnuMo ABCDE 8]3.1 [5"12.ddeeahTr 404-8]3.1 [5"12.ddeeahTr 404- leo HuhTrleo HuhTr Tail Length .130" [3.30] (DIM “J”) 6 Tail Length .160" [4.06] (DIM “J”) 6 31 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 0 6 . 6 81 1 1 . 7 61 1 5 . 8 21 2 3 . 8 31 3 0 . 4 3 C 8 D 4 3 D S 2 9 E 2C 8 D 4 3 D S 2 9 D 2C 8 D 4 3 D S 2 9 C 2C 8 D 4 3 D S 2 9 B 2C 8 D 4 3 D S 2 9 A 24 3 4 . 2 0 04 . 4 0 04 . 5 6 04 . 8 7 55 . 1 3 5 9 9 . 0 61 0 4 . 1 41 0 8 . 2 01 1 6 . 2 11 2 2 . 8 1 C 8 D 4 0 D S 2 9 E 2C 8 D 4 0 D S 2 9 D 2C 8 D 4 0 D S 2 9 C 2C 8 D 4 0 D S 2 9 B 2C 8 D 4 0 D S 2 9 A 24 0 3 . 9 0 04 . 1 0 04 . 2 6 04 . 5 7 54 . 8 3 5 8 8 . 9 09 3 . 9 89 8 . 0 41 0 6 . 0 51 1 2 . 6 5 C 8 D 3 6 D S 2 9 E 2C 8 D 3 6 D S 2 9 D 2C 8 D 3 6 D S 2 9 C 2C 8 D 3 6 D S 2 9 B 2C 8 D 3 6 D S 2 9 A 23 6 3 . 5 0 03 . 7 0 03 . 8 6 04 . 1 7 54 . 4 3 5 8 6 . 3 69 1 . 4 49 5 . 5 01 0 3 . 5 11 1 0 . 1 1 C 8 D 3 5 D S 2 9 E 2C 8 D 3 5 D S 2 9 D 2C 8 D 3 5 D S 2 9 C 2C 8 D 3 5 D S 2 9 B 2C 8 D 3 5 D S 2 9 A 23 5 3 . 4 0 03 . 6 0 03 . 7 6 04 . 0 7 54 . 3 3 5 7 6 . 2 08 1 . 2 88 5 . 3 49 3 . 3 59 9 . 9 5 C 8 D 3 1 D S 2 9 E 2C 8 D 3 1 D S 2 9 D 2C 8 D 3 1 D S 2 9 C 2C 8 D 3 1 D S 2 9 B 2C 8 D 3 1 D S 2 9 A 23 1 3 . 0 0 03 . 2 0 03 . 3 6 03 . 6 7 53 . 9 3 5 7 3 . 6 67 8 . 7 48 2 . 8 09 0 . 8 19 7 . 4 1 C 8 D 3 0 D S 2 9 E 2C 8 D 3 0 D S 2 9 D 2C 8 D 3 0 D S 2 9 C 2C 8 D 3 0 D S 2 9 B 2C 8 D 3 0 D S 2 9 A 23 0 2 . 9 0 03 . 1 0 03 . 2 6 03 . 5 7 53 . 8 3 5 6 8 . 5 87 3 . 6 67 7 . 7 28 5 . 7 39 2 . 3 3 C 8 D 2 8 D S 2 9 E 2C 8 D 2 8 D S 2 9 D 2C 8 D 2 8 D S 2 9 C 2C 8 D 2 8 D S 2 9 B 2C 8 D 2 8 D S 2 9 A 22 8 2 . 7 0 02 . 9 0 03 . 0 6 03 . 3 7 53 . 6 3 5 6 0 . 9 66 6 . 0 47 0 . 1 07 8 . 1 18 4 . 7 1 C 8 D 2 5 D S 2 9 E 2C 8 D 2 5 D S 2 9 D 2C 8 D 2 5 D S 2 9 C 2C 8 D 2 5 D S 2 9 B 2C 8 D 2 5 D S 2 9 A 22 5 2 . 4 0 02 . 6 0 02 . 7 6 03 . 0 7 53 . 3 3 5 5 3 . 3 45 8 . 4 26 2 . 4 87 0 . 4 97 7 . 0 9 C 8 D 2 2 D S 2 9 E 2C 8 D 2 2 D S 2 9 D 2C 8 D 2 2 D S 2 9 C 2C 8 D 2 2 D S 2 9 B 2C 8 D 2 2 D S 2 9 A 22 2 2 . 1 0 02 . 3 0 02 . 4 6 02 . 7 7 53 . 0 3 5 4 8 . 2 65 3 . 3 45 7 . 4 06 5 . 4 17 2 . 0 1 C 8 D 2 0 D S 2 9 E 2C 8 D 2 0 D S 2 9 D 2C 8 D 2 0 D S 2 9 C 2C 8 D 2 0 D S 2 9 B 2C 8 D 2 0 D S 2 9 A 22 0 1 . 9 0 02 . 1 0 02 . 2 6 02 . 5 7 52 . 8 3 5 4 3 . 1 84 8 . 2 65 2 . 3 26 0 . 3 36 6 . 9 3 C 8 D 1 8 D S 2 9 E 2C 8 D 1 8 D S 2 9 D 2C 8 D 1 8 D S 2 9 C 2C 8 D 1 8 D S 2 9 B 2C 8 D 1 8 D S 2 9 A 21 8 1 . 7 0 01 . 9 0 02 . 0 6 02 . 3 7 52 . 6 3 5 3 5 . 5 64 0 . 6 44 4 . 7 05 2 . 7 15 9 . 3 1 C 8 D 1 5 D S 2 9 E 2C 8 D 1 5 D S 2 9 D 2C 8 D 1 5 D S 2 9 C 2C 8 D 1 5 D S 2 9 B 2C 8 D 1 5 D S 2 9 A 21 5 1 . 4 0 01 . 6 0 01 . 7 6 02 . 0 7 52 . 3 3 5 2 7 . 9 43 3 . 0 23 7 . 0 84 5 . 0 95 1 . 6 9 C 8 D 1 2 D S 2 9 E 2C 8 D 1 2 D S 2 9 D 2C 8 D 1 2 D S 2 9 C 2C 8 D 1 2 D S 2 9 B 2C 8 D 1 2 D S 2 9 A 21 2 1 . 1 0 01 . 3 0 01 . 4 6 01 . 7 7 52 . 0 3 5 2 2 . 8 62 7 . 9 43 2 . 0 04 0 . 0 14 6 . 6 1 C 8 D 1 0 D S 2 9 E 2C 8 D 1 0 D S 2 9 D 2C 8 D 1 0 D S 2 9 C 2C 8 D 1 0 D S 2 9 B 2C 8 D 1 0 D S 2 9 A 21 0 0 . 9 0 01 . 1 0 01 . 2 6 01 . 5 7 51 . 8 3 5 1 2 . 7 01 7 . 7 82 1 . 8 42 9 . 8 53 6 . 4 5 C 8 D 0 6 D S 2 9 E 2C 8 D 0 6 D S 2 9 D 2C 8 D 0 6 D S 2 9 C 2C 8 D 0 6 D S 2 9 B 2C 8 D 0 6 D S 2 9 A 2 0 . 5 0 00 . 7 0 00 . 8 6 01 . 1 7 51 . 4 3 5 1 4 9 . 8 61 5 4 . 9 41 5 9 . 0 01 6 7 . 0 11 7 3 . 6 1 C 8 D 6 0 D S 2 9 E 1C 8 D 6 0 D S 2 9 D 1C 8 D 6 0 D S 2 9 C 1C 8 D 6 0 D S 2 9 B 1C 8 D 6 0 D S 2 9 A 16 0 5 . 9 0 06 . 1 0 06 . 2 6 06 . 5 7 56 . 8 3 5 1 2 4 . 4 61 2 9 . 5 41 3 3 . 6 01 4 1 . 6 11 4 8 . 2 1 C 8 D 5 0 D S 2 9 E 1C 8 D 5 0 D S 2 9 D 1C 8 D 5 0 D S 2 9 C 1C 8 D 5 0 D S 2 9 B 1C 8 D 5 0 D S 2 9 A 15 0 4 . 9 0 05 . 1 0 05 . 2 6 05 . 5 7 55 . 8 3 5 1 0 6 . 6 81 1 1 . 7 61 1 5 . 8 21 2 3 . 8 31 3 0 . 4 3 C 8 D 4 3 D S 2 9 E 1C 8 D 4 3 D S 2 9 D 1C 8 D 4 3 D S 2 9 C 1C 8 D 4 3 D S 2 9 B 1C 8 D 4 3 D S 2 9 A 14 3 4 . 2 0 04 . 4 0 04 . 5 6 04 . 8 7 55 . 1 3 5 9 9 . 0 61 0 4 . 1 41 0 8 . 2 01 1 6 . 2 11 2 2 . 8 1 C 8 D 4 0 D S 2 9 E 1C 8 D 4 0 D S 2 9 D 1C 8 D 4 0 D S 2 9 C 1C 8 D 4 0 D S 2 9 B 1C 8 D 4 0 D S 2 9 A 14 0 3 . 9 0 04 . 1 0 04 . 2 6 04 . 5 7 54 . 8 3 5 8 8 . 9 09 3 . 9 89 8 . 0 41 0 6 . 0 51 1 2 . 6 5 C 8 D 3 6 D S 2 9 E 1C 8 D 3 6 D S 2 9 D 1C 8 D 3 6 D S 2 9 C 1C 8 D 3 6 D S 2 9 B 1C 8 D 3 6 D S 2 9 A 13 6 3 . 5 0 03 . 7 0 03 . 8 6 04 . 1 7 54 . 4 3 5 8 6 . 3 69 1 . 4 49 5 . 5 01 0 3 . 5 11 1 0 . 1 1 C 8 D 3 5 D S 2 9 E 1C 8 D 3 5 D S 2 9 D 1C 8 D 3 5 D S 2 9 C 1C 8 D 3 5 D S 2 9 B 1C 8 D 3 5 D S 2 9 A 13 5 3 . 4 0 03 . 6 0 03 . 7 6 04 . 0 7 54 . 3 3 5 7 6 . 2 08 1 . 2 88 5 . 3 49 3 . 3 59 9 . 9 5 C 8 D 3 1 D S 2 9 E 1C 8 D 3 1 D S 2 9 D 1C 8 D 3 1 D S 2 9 C 1C 8 D 3 1 D S 2 9 B 1C 8 D 3 1 D S 2 9 A 13 1 3 . 0 0 03 . 2 0 03 . 3 6 03 . 6 7 53 . 9 3 5 7 3 . 6 67 8 . 7 48 2 . 8 09 0 . 8 19 7 . 4 1 C 8 D 3 0 D S 2 9 E 1C 8 D 3 0 D S 2 9 D 1C 8 D 3 0 D S 2 9 C 1C 8 D 3 0 D S 2 9 B 1C 8 D 3 0 D S 2 9 A 13 0 2 . 9 0 03 . 1 0 03 . 2 6 03 . 5 7 53 . 8 3 5 6 8 . 5 87 3 . 6 67 7 . 7 28 5 . 7 39 2 . 3 3 C 8 D 2 8 D S 2 9 E 1C 8 D 2 8 D S 2 9 D 1C 8 D 2 8 D S 2 9 C 1C 8 D 2 8 D S 2 9 B 1C 8 D 2 8 D S 2 9 A 12 8 2 . 7 0 02 . 9 0 03 . 0 6 03 . 3 7 53 . 6 3 5 6 0 . 9 66 6 . 0 47 0 . 1 07 8 . 1 18 4 . 7 1 C 8 D 2 5 D S 2 9 E 1C 8 D 2 5 D S 2 9 D 1C 8 D 2 5 D S 2 9 C 1C 8 D 2 5 D S 2 9 B 1C 8 D 2 5 D S 2 9 A 12 5 2 . 4 0 02 . 6 0 02 . 7 6 03 . 0 7 53 . 3 3 5 5 3 . 3 45 8 . 4 26 2 . 4 87 0 . 4 97 7 . 0 9 C 8 D 2 2 D S 2 9 E 1C 8 D 2 2 D S 2 9 D 1C 8 D 2 2 D S 2 9 C 1C 8 D 2 2 D S 2 9 B 1C 8 D 2 2 D S 2 9 A 12 2 2 . 1 0 02 . 3 0 02 . 4 6 02 . 7 7 53 . 0 3 5 4 8 . 2 65 3 . 3 45 7 . 4 06 5 . 4 17 2 . 0 1 C 8 D 2 0 D S 2 9 E 1C 8 D 2 0 D S 2 9 D 1C 8 D 2 0 D S 2 9 C 1C 8 D 2 0 D S 2 9 B 1C 8 D 2 0 D S 2 9 A 12 0 1 . 9 0 02 . 1 0 02 . 2 6 02 . 5 7 52 . 8 3 5 4 3 . 1 84 8 . 2 65 2 . 3 26 0 . 3 36 6 . 9 3 C 8 D 1 8 D S 2 9 E 1C 8 D 1 8 D S 2 9 D 1C 8 D 1 8 D S 2 9 C 1C 8 D 1 8 D S 2 9 B 1C 8 D 1 8 D S 2 9 A 11 8 1 . 7 0 01 . 9 0 02 . 0 6 02 . 3 7 52 . 6 3 5 3 5 . 5 64 0 . 6 44 4 . 7 05 2 . 7 15 9 . 3 1 C 8 D 1 5 D S 2 9 E 1C 8 D 1 5 D S 2 9 D 1C 8 D 1 5 D S 2 9 C 1C 8 D 1 5 D S 2 9 B 1C 8 D 1 5 D S 2 9 A 11 5 1 . 4 0 01 . 6 0 01 . 7 6 02 . 0 7 52 . 3 3 5 2 7 . 9 43 3 . 0 23 7 . 0 84 5 . 0 95 1 . 6 9 C 8 D 1 2 D S 2 9 E 1C 8 D 1 2 D S 2 9 D 1C 8 D 1 2 D S 2 9 C 1C 8 D 1 2 D S 2 9 B 1C 8 D 1 2 D S 2 9 A 11 2 1 . 1 0 01 . 3 0 01 . 4 6 01 . 7 7 52 . 0 3 5 2 2 . 8 62 7 . 9 43 2 . 0 04 0 . 0 14 6 . 6 1 C 8 D 1 0 D S 2 9 E 1C 8 D 1 0 D S 2 9 D 1C 8 D 1 0 D S 2 9 C 1C 8 D 1 0 D S 2 9 B 1C 8 D 1 0 D S 2 9 A 1 0 . 9 0 01 . 1 0 01 . 2 6 01 . 5 7 51 . 8 3 51 0 1 2 . 7 01 7 . 7 82 1 . 8 42 9 . 8 53 6 . 4 5 C 8 D 0 6 D S 2 9 E 1C 8 D 0 6 D S 2 9 D 1C 8 D 0 6 D S 2 9 C 1C 8 D 0 6 D S 2 9 B 1C 8 D 0 6 D S 2 9 A 1 0 . 5 0 00 . 7 0 00 . 8 6 01 . 1 7 51 . 4 3 5 i n s e r ti n s e r t P o s i t i o n s E a r s R e a d o u t M o u n t i n g D u a l F l u s hN oC e n t e r e dC e n t e r e dD i m e n s i o n s Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information -wooRt-wo R8]5.0 [0"20/ .e linerten C]42.5["00 .1 snioOtpar EgintnuMo of. oN shluF ar EgintnuMoar EgintnuMoar EgintnuMoar EgintnuMo ABCDE8]3.1 [5"12.ddeeahTr 404-8]3.1 [5"12.ddeeahTr 404- leo HuhTrleo HuhTr Tail Length .160" [4.06] (DIM “J”) (Continued) Tail Length .220" [5.59] (DIM “J”) 6 32 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 9 . 8 61 5 4 . 9 41 5 9 . 0 01 6 7 . 0 11 7 3 . 6 1 C 8 D 6 0 D S 2 9 E 3C 8 D 6 0 D S 2 9 D 3C 8 D 6 0 D S 2 9 C 3C 8 D 6 0 D S 2 9 B 3C 8 D 6 0 D S 2 9 A 36 0 5 . 9 0 06 . 1 0 06 . 2 6 06 . 5 7 56 . 8 3 5 1 2 4 . 4 61 2 9 . 5 41 3 3 . 6 01 4 1 . 6 11 4 8 . 2 1 C 8 D 5 0 D S 2 9 E 3C 8 D 5 0 D S 2 9 D 3C 8 D 5 0 D S 2 9 C 3C 8 D 5 0 D S 2 9 B 3C 8 D 5 0 D S 2 9 A 35 0 4 . 9 0 05 . 1 0 05 . 2 6 05 . 5 7 55 . 8 3 5 1 0 6 . 6 81 1 1 . 7 61 1 5 . 8 21 2 3 . 8 31 3 0 . 4 3 C 8 D 4 3 D S 2 9 E 3C 8 D 4 3 D S 2 9 D 3C 8 D 4 3 D S 2 9 C 3C 8 D 4 3 D S 2 9 B 3C 8 D 4 3 D S 2 9 A 34 3 4 . 2 0 04 . 4 0 04 . 5 6 04 . 8 7 55 . 1 3 5 9 9 . 0 61 0 4 . 1 41 0 8 . 2 01 1 6 . 2 11 2 2 . 8 1 C 8 D 4 0 D S 2 9 E 3C 8 D 4 0 D S 2 9 D 3C 8 D 4 0 D S 2 9 C 3C 8 D 4 0 D S 2 9 B 3C 8 D 4 0 D S 2 9 A 34 0 3 . 9 0 04 . 1 0 04 . 2 6 04 . 5 7 54 . 8 3 5 8 8 . 9 09 3 . 9 89 8 . 0 41 0 6 . 0 51 1 2 . 6 5 C 8 D 3 6 D S 2 9 E 3C 8 D 3 6 D S 2 9 D 3C 8 D 3 6 D S 2 9 C 3C 8 D 3 6 D S 2 9 B 3C 8 D 3 6 D S 2 9 A 33 6 3 . 5 0 03 . 7 0 03 . 8 6 04 . 1 7 54 . 4 3 5 8 6 . 3 69 1 . 4 49 5 . 5 01 0 3 . 5 11 1 0 . 1 1 C 8 D 3 5 D S 2 9 E 3C 8 D 3 5 D S 2 9 D 3C 8 D 3 5 D S 2 9 C 3C 8 D 3 5 D S 2 9 B 3C 8 D 3 5 D S 2 9 A 33 5 3 . 4 0 03 . 6 0 03 . 7 6 04 . 0 7 54 . 3 3 5 7 6 . 2 08 1 . 2 88 5 . 3 49 3 . 3 59 9 . 9 5 C 8 D 3 1 D S 2 9 E 3C 8 D 3 1 D S 2 9 D 3C 8 D 3 1 D S 2 9 C 3C 8 D 3 1 D S 2 9 B 3C 8 D 3 1 D S 2 9 A 33 1 3 . 0 0 03 . 2 0 03 . 3 6 03 . 6 7 53 . 9 3 5 7 3 . 6 67 8 . 7 48 2 . 8 09 0 . 8 19 7 . 4 1 C 8 D 3 0 D S 2 9 E 3C 8 D 3 0 D S 2 9 D 3C 8 D 3 0 D S 2 9 C 3C 8 D 3 0 D S 2 9 B 3C 8 D 3 0 D S 2 9 A 33 0 2 . 9 0 03 . 1 0 03 . 2 6 03 . 5 7 53 . 8 3 5 6 8 . 5 87 3 . 6 67 7 . 7 28 5 . 7 39 2 . 3 3 C 8 D 2 8 D S 2 9 E 3C 8 D 2 8 D S 2 9 D 3C 8 D 2 8 D S 2 9 C 3C 8 D 2 8 D S 2 9 B 3C 8 D 2 8 D S 2 9 A 32 8 2 . 7 0 02 . 9 0 03 . 0 6 03 . 3 7 53 . 6 3 5 6 0 . 9 66 6 . 0 47 0 . 1 07 8 . 1 18 4 . 7 1 C 8 D 2 5 D S 2 9 E 3C 8 D 2 5 D S 2 9 D 3C 8 D 2 5 D S 2 9 C 3C 8 D 2 5 D S 2 9 B 3C 8 D 2 5 D S 2 9 A 32 5 2 . 4 0 02 . 6 0 02 . 7 6 03 . 0 7 53 . 3 3 5 5 3 . 3 45 8 . 4 26 2 . 4 87 0 . 4 97 7 . 0 9 C 8 D 2 2 D S 2 9 E 3C 8 D 2 2 D S 2 9 D 3C 8 D 2 2 D S 2 9 C 3C 8 D 2 2 D S 2 9 B 3C 8 D 2 2 D S 2 9 A 32 2 2 . 1 0 02 . 3 0 02 . 4 6 02 . 7 7 53 . 0 3 5 4 8 . 2 65 3 . 3 45 7 . 4 06 5 . 4 17 2 . 0 1 C 8 D 2 0 D S 2 9 E 3C 8 D 2 0 D S 2 9 D 3C 8 D 2 0 D S 2 9 C 3C 8 D 2 0 D S 2 9 B 3C 8 D 2 0 D S 2 9 A 32 0 1 . 9 0 02 . 1 0 02 . 2 6 02 . 5 7 52 . 8 3 5 4 3 . 1 84 8 . 2 65 2 . 3 26 0 . 3 36 6 . 9 3 C 8 D 1 8 D S 2 9 E 3C 8 D 1 8 D S 2 9 D 3C 8 D 1 8 D S 2 9 C 3C 8 D 1 8 D S 2 9 B 3C 8 D 1 8 D S 2 9 A 31 8 1 . 7 0 01 . 9 0 02 . 0 6 02 . 3 7 52 . 6 3 5 3 5 . 5 64 0 . 6 44 4 . 7 05 2 . 7 15 9 . 3 1 C 8 D 1 5 D S 2 9 E 3C 8 D 1 5 D S 2 9 D 3C 8 D 1 5 D S 2 9 C 3C 8 D 1 5 D S 2 9 B 3C 8 D 1 5 D S 2 9 A 31 5 1 . 4 0 01 . 6 0 01 . 7 6 02 . 0 7 52 . 3 3 5 2 7 . 9 43 3 . 0 23 7 . 0 84 5 . 0 95 1 . 6 9 C 8 D 1 2 D S 2 9 E 3C 8 D 1 2 D S 2 9 D 3C 8 D 1 2 D S 2 9 C 3C 8 D 1 2 D S 2 9 B 3C 8 D 1 2 D S 2 9 A 31 2 1 . 1 0 01 . 3 0 01 . 4 6 01 . 7 7 52 . 0 3 5 2 2 . 8 62 7 . 9 43 2 . 0 04 0 . 0 14 6 . 6 1 C 8 D 1 0 D S 2 9 E 3C 8 D 1 0 D S 2 9 D 3C 8 D 1 0 D S 2 9 C 3C 8 D 1 0 D S 2 9 B 3C 8 D 1 0 D S 2 9 A 31 0 0 . 9 0 01 . 1 0 01 . 2 6 01 . 5 7 51 . 8 3 5 1 2 . 7 01 7 . 7 82 1 . 8 42 9 . 8 53 6 . 4 5 C 8 D 0 6 D S 2 9 E 3C 8 D 0 6 D S 2 9 D 3C 8 D 0 6 D S 2 9 C 3C 8 D 0 6 D S 2 9 B 3C 8 D 0 6 D S 2 9 A 3 0 . 5 0 00 . 7 0 00 . 8 6 01 . 1 7 51 . 4 3 5 1 4 9 . 8 61 5 4 . 9 41 5 9 . 0 01 6 7 . 0 11 7 3 . 6 1 C 8 D 6 0 D S 2 9 E 2C 8 D 6 0 D S 2 9 D 2C 8 D 6 0 D S 2 9 C 2C 8 D 6 0 D S 2 9 B 2C 8 D 6 0 D S 2 9 A 26 0 5 . 9 0 06 . 1 0 06 . 2 6 06 . 5 7 56 . 8 3 5 1 2 4 . 4 61 2 9 . 5 41 3 3 . 6 01 4 1 . 6 11 4 8 . 2 1 C 8 D 5 0 D S 2 9 E 2C 8 D 5 0 D S 2 9 D 2C 8 D 5 0 D S 2 9 C 2C 8 D 5 0 D S 2 9 B 2C 8 D 5 0 D S 2 9 A 25 0 4 . 9 0 05 . 1 0 05 . 2 6 05 . 5 7 55 . 8 3 5 i n s e r ti n s e r t P o s i t i o n s E a r s R e a d o u t M o u n t i n g D u a l F l u s hN oC e n t e r e dC e n t e r e dD i m e n s i o n s Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series Connectors 100 x .200 [2.54 x 5.08], .510 [12.95] and .395 [10.03] Card Slot Depth, Full Scoop Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 .054 to .071 Accepts Thk. PC Board nCertified [3.37 to 1.80] by Canadian Standards Association, File No. LR49571 Physical Properties: Insulation Resistance— 5000 megohms minimum. Insertion/Withdrawal Force .180(Daughter Card)—8 oz./2 oz. [4.57] [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. Insulator Body—Glass filledA thermoplastic, UL rating 94V-O. High Btemp. plastic option is available; add suffix M399 to part number.C .02Color—Black Contact Gap [.51] Contacts—High strength copper alloy. .390 Contact Plating—.000050 [0.00127][9.91] nickel underplate with .000030 [0.00076] gold in the mating area, .100tin/lead on tails, .000100 [0.00254] [2.54] minimum Electrical Properties: Operation Voltage—600 VDC Card Slot (sea level).705Depth [17.91]Current Rating—3 Amperes Initial Contact Resistance— 10 milliohms Environmental Properties: Operating Temperature— -55˚C to +125˚C C.180 Temperature Cycling—[4.57] MIL-STD-202 method 107 Vibration—MIL-STD-202 method 204 Related Product Data Dim C .040±.003 Dia.Daughter Card Edge Pattern—[1.02±.08] page 57 .200 [5.08] .100 [2.54] 33 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information oop Scllu F-wooRt-wo R8]5.0 [0"20/ .e linerten C]42.5["00 .1 alu Df o.oNart PedirucqA .os PtuodeaRABC .510" [12.95] Card Slot Depth .395" [10.03] Card Slot Depth 34 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 9 . 8 61 5 5 . 0 41 5 8 . 3 4 W 8 D 6 0 D S 2 9 0 9 36 0 5 . 9 0 06 . 1 0 46 . 2 3 4 1 2 4 . 4 61 2 9 . 6 41 3 2 . 9 4 W 8 D 5 0 D S 2 9 0 9 35 0 4 . 9 0 05 . 1 0 45 . 2 3 4 1 1 1 . 7 61 1 6 . 9 41 2 0 . 2 4 W 8 D 4 5 D S 2 9 0 9 34 5 4 . 4 0 04 . 6 0 44 . 7 3 4 1 0 6 . 6 81 1 1 . 8 61 1 5 . 1 6 W 8 D 4 3 D S 2 9 0 9 34 3 4 . 2 0 04 . 4 0 44 . 5 3 4 9 9 . 0 61 0 4 . 2 41 0 7 . 5 4 W 8 D 4 0 D S 2 9 0 9 34 0 3 . 9 0 04 . 1 0 44 . 2 3 4 8 8 . 9 09 4 . 0 89 7 . 3 8 W 8 D 3 6 D S 2 9 0 9 33 6 3 . 5 0 03 . 7 0 43 . 8 3 4 8 6 . 3 69 1 . 5 49 4 . 8 4 W 8 D 3 5 D S 2 9 0 9 33 5 3 . 4 0 03 . 6 0 43 . 7 3 4 7 3 . 6 67 8 . 8 48 2 . 1 4 W 8 D 3 0 D S 2 9 0 9 33 0 2 . 9 0 03 . 1 0 43 . 2 3 4 6 8 . 5 87 3 . 7 67 7 . 0 6 W 8 D 2 8 D S 2 9 0 9 32 8 2 . 7 0 02 . 9 0 43 . 0 3 4 6 0 . 9 66 6 . 1 46 9 . 4 4 W 8 D 2 5 D S 2 9 0 9 32 5 2 . 4 0 02 . 6 0 42 . 7 3 4 5 3 . 3 45 8 . 5 26 1 . 8 2 W 8 D 2 2 D S 2 9 0 9 32 2 2 . 1 0 02 . 3 0 42 . 4 3 4 4 8 . 2 65 3 . 4 45 6 . 7 4 W 8 D 2 0 D S 2 9 0 9 32 0 1 . 9 0 02 . 1 0 42 . 2 3 4 4 3 . 1 84 8 . 3 65 1 . 6 6 W 8 D 1 8 D S 2 9 0 9 31 8 1 . 7 0 01 . 9 0 42 . 0 3 4 1 4 9 . 8 61 5 5 . 0 41 5 8 . 3 4 W 8 D 6 0 D S 2 9 0 6 36 0 5 . 9 0 06 . 1 0 46 . 2 3 4 1 2 4 . 4 61 2 9 . 6 41 3 2 . 9 4 W 8 D 5 0 D S 2 9 0 6 35 0 4 . 9 0 05 . 1 0 45 . 2 3 4 1 1 1 . 7 61 1 6 . 9 41 2 0 . 2 4 W 8 D 4 5 D S 2 9 0 6 34 5 4 . 4 0 04 . 6 0 44 . 7 3 4 1 0 6 . 6 81 1 1 . 8 61 1 5 . 1 6 W 8 D 4 3 D S 2 9 0 6 34 3 4 . 2 0 04 . 4 0 44 . 5 3 4 9 9 . 0 61 0 4 . 2 41 0 7 . 5 4 W 8 D 4 0 D S 2 9 0 6 34 0 3 . 9 0 04 . 1 0 44 . 2 3 4 8 8 . 9 09 4 . 0 89 7 . 3 8 W 8 D 3 6 D S 2 9 0 6 33 6 3 . 5 0 03 . 7 0 43 . 8 3 4 8 6 . 3 69 1 . 5 49 4 . 8 4 W 8 D 3 5 D S 2 9 0 6 33 5 3 . 4 0 03 . 6 0 43 . 7 3 4 7 3 . 6 67 8 . 8 48 2 . 1 4 W 8 D 3 0 D S 2 9 0 6 33 0 2 . 9 0 03 . 1 0 43 . 2 3 4 6 8 . 5 87 3 . 7 67 7 . 0 6 W 8 D 2 8 D S 2 9 0 6 32 8 2 . 7 0 02 . 9 0 43 . 0 3 4 6 0 . 9 66 6 . 1 46 9 . 4 4 W 8 D 2 5 D S 2 9 0 6 32 5 2 . 4 0 02 . 6 0 42 . 7 3 4 5 3 . 3 45 8 . 5 26 1 . 8 2 W 8 D 2 2 D S 2 9 0 6 32 2 2 . 1 0 02 . 3 0 42 . 4 3 4 4 8 . 2 65 3 . 4 45 6 . 7 4 W 8 D 2 0 D S 2 9 0 6 32 0 1 . 9 0 02 . 1 0 42 . 2 3 4 4 3 . 1 84 8 . 3 65 1 . 6 6 W 8 D 1 8 D S 2 9 0 6 31 8 1 . 7 0 01 . 9 0 42 . 0 3 4 N u m b e r D i m e n s i o n s Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series Connectors .125 x .250 [3.18 x 6.35] Centerline, Dip Solder Tails, .300 [7.62] Card Slot Depth Product Facts nRecognized under the Component Program .020±.010 Contact Gap of Underwriters [.51±.25] Laboratories Inc., .145 File No. E60980.300 [3.68]Card Slot Depth [7.62] nCertified by Canadian Standards Association, J D File No. LR49571 .250 [6.35] E Physical Properties: Insulation Resistance— 5000 megohms minimum. .370 Insertion/Withdrawal Force[9.40] (Daughter Card)—8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade..100 Typ. [2.54] Insulator Body—Glass filled thermoplastic, UL rating 94V-O. HighB temp. plastic option is available; add suffix M399 to part number. AColor—Black Contacts—High strength copper alloy. C Contact Plating—.000050 [0.00127] .250 nickel underplate with .000030[6.35] [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum.610 [15.49] Electrical Properties: Operation Voltage—1000 VDC (sea level).180.060 [4.57][1.52] Current Rating—3 Amperes .020Initial Contact Resistance—Typ. Dia. [0.51] 10 milliohmsE Environmental Properties: Dim B Operating Temperature— -55˚C to +125˚C Dim E .040±.003Temperature Cycling—.128Dia. [1.02±.08] Dia. [3.25] MIL-STD-202 method 107 Vibration—MIL-STD-202 method 204 Related Product Data: .250 [6.35]Daughter Card Edge Pattern— .125page 57 [3.18] Mounting Styles .125 Dia. [3.18] #4-40 .125 Dia. [3.18] .250.250 [6.35][6.35] Centered Mounting EarCentered Mounting EarFlush Mounting Ear Flush Mounting Ear No Mounting Ears .125 [3.18] Thru Hole4-40 Threaded Insert.125 [3.18] Thru Hole4-40 Threaded Insert 35 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information -wooRt-wo R5]6.3 [0"25/ .e linerten C]83.1["25 .1 snioOtpar EgintnuMo of. oN shluF ar EgintnuMoar EgintnuMoar EgintnuMoar EgintnuMo ABCDE8]3.1 [5"12.ddeeahTr 404-8]3.1 [5"12.ddeeahTr 404- leo HuhTrleo HuhTr ”)“JM. (ID ].303 [30 .1htgen LailT 6 Tail Length .160 [4.06] (DIM. “J”) 6 36 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 5 5 . 5 81 6 1 . 9 31 6 5 . 9 91 7 2 . 5 91 7 9 . 2 0 C 7 D 5 0 D S 2 9 E 3C 7 D 5 0 D S 2 9 D 3C 7 D 5 0 D S 2 9 C 3C 7 D 5 0 D S 2 9 B 3C 7 D 5 0 D S 2 9 A 35 0 6 . 1 2 56 . 3 7 56 . 5 3 56 . 7 9 57 . 0 5 5 1 3 3 . 3 51 3 9 . 7 01 4 3 . 7 61 5 0 . 3 71 5 6 . 9 7 C 7 D 4 3 D S 2 9 E 3C 7 D 4 3 D S 2 9 D 3C 7 D 4 3 D S 2 9 C 3C 7 D 4 3 D S 2 9 B 3C 7 D 4 3 D S 2 9 A 34 3 5 . 2 5 05 . 5 0 05 . 6 6 05 . 9 2 06 . 1 8 0 1 2 3 . 8 31 3 0 . 1 81 3 4 . 2 41 4 0 . 8 41 4 7 . 4 5 C 7 D 4 0 D S 2 9 E 3C 7 D 4 0 D S 2 9 D 3C 7 D 4 0 D S 2 9 C 3C 7 D 4 0 D S 2 9 B 3C 7 D 4 0 D S 2 9 A 34 0 4 . 8 7 55 . 1 2 55 . 2 8 55 . 5 4 55 . 8 0 5 1 1 1 . 1 31 1 7 . 4 81 2 1 . 5 41 2 8 . 1 41 3 4 . 7 5 C 7 D 3 6 D S 2 9 E 3C 7 D 3 6 D S 2 9 D 3C 7 D 3 6 D S 2 9 C 3C 7 D 3 6 D S 2 9 B 3C 7 D 3 6 D S 2 9 A 33 6 4 . 3 7 54 . 6 2 54 . 7 8 55 . 0 4 55 . 3 0 5 1 0 7 . 9 51 1 4 . 3 01 1 8 . 3 61 2 4 . 9 71 3 1 . 5 7 C 7 D 3 5 D S 2 9 E 3C 7 D 3 5 D S 2 9 D 3C 7 D 3 5 D S 2 9 C 3C 7 D 3 5 D S 2 9 B 3C 7 D 3 5 D S 2 9 A 33 5 4 . 2 5 04 . 5 0 04 . 6 6 04 . 9 2 05 . 1 8 0 9 5 . 2 51 0 1 . 6 01 0 5 . 6 61 1 2 . 2 71 1 8 . 8 7 C 7 D 3 1 D S 2 9 E 3C 7 D 3 1 D S 2 9 D 3C 7 D 3 1 D S 2 9 C 3C 7 D 3 1 D S 2 9 B 3C 7 D 3 1 D S 2 9 A 33 1 3 . 7 5 04 . 0 0 04 . 1 6 04 . 4 2 04 . 6 8 0 9 2 . 0 89 8 . 4 31 0 2 . 4 91 0 9 . 0 91 1 5 . 7 0 C 7 D 3 0 D S 2 9 E 3C 7 D 3 0 D S 2 9 D 3C 7 D 3 0 D S 2 9 C 3C 7 D 3 0 D S 2 9 B 3C 7 D 3 0 D S 2 9 A 33 0 3 . 6 2 53 . 8 7 54 . 0 3 54 . 2 9 54 . 5 5 5 8 5 . 7 39 2 . 0 89 6 . 1 41 0 2 . 7 41 0 9 . 3 5 C 7 D 2 8 D S 2 9 E 3C 7 D 2 8 D S 2 9 D 3C 7 D 2 8 D S 2 9 C 3C 7 D 2 8 D S 2 9 B 3C 7 D 2 8 D S 2 9 A 32 8 3 . 3 7 53 . 6 2 53 . 7 8 54 . 0 4 54 . 3 0 5 7 6 . 2 08 2 . 5 58 6 . 6 19 3 . 2 29 9 . 8 2 C 7 D 2 5 D S 2 9 E 3C 7 D 2 5 D S 2 9 D 3C 7 D 2 5 D S 2 9 C 3C 7 D 2 5 D S 2 9 B 3C 7 D 2 5 D S 2 9 A 32 5 3 . 0 0 03 . 2 5 03 . 4 1 03 . 6 7 03 . 9 3 0 6 6 . 6 87 3 . 0 37 7 . 0 98 3 . 6 99 0 . 3 0 C 7 D 2 2 D S 2 9 E 3C 7 D 2 2 D S 2 9 D 3C 7 D 2 2 D S 2 9 C 3C 7 D 2 2 D S 2 9 B 3C 7 D 2 2 D S 2 9 A 32 2 2 . 6 2 52 . 8 7 53 . 0 3 53 . 2 9 53 . 5 5 5 5 3 . 9 86 0 . 3 36 4 . 3 97 0 . 9 97 7 . 6 0 C 7 D 1 8 D S 2 9 E 3C 7 D 1 8 D S 2 9 D 3C 7 D 1 8 D S 2 9 C 3C 7 D 1 8 D S 2 9 B 3C 7 D 1 8 D S 2 9 A 31 8 2 . 1 2 52 . 3 7 52 . 5 3 52 . 7 9 53 . 0 5 5 4 4 . 4 55 0 . 8 05 4 . 8 66 1 . 4 76 8 . 0 7 C 7 D 1 5 D S 2 9 E 3C 7 D 1 5 D S 2 9 D 3C 7 D 1 5 D S 2 9 C 3C 7 D 1 5 D S 2 9 B 3C 7 D 1 5 D S 2 9 A 31 5 1 . 7 5 02 . 0 0 02 . 1 6 02 . 4 2 02 . 6 8 0 2 8 . 5 83 4 . 9 33 8 . 9 94 5 . 5 95 2 . 2 0 C 7 D 1 0 D S 2 9 E 3C 7 D 1 0 D S 2 9 D 3C 7 D 1 0 D S 2 9 C 3C 7 D 1 0 D S 2 9 B 3C 7 D 1 0 D S 2 9 A 31 0 1 . 1 2 51 . 3 7 51 . 5 3 51 . 7 9 52 . 0 5 5 1 5 . 8 82 2 . 2 32 6 . 2 93 2 . 8 93 9 . 5 0 C 7 D 0 6 D S 2 9 E 3C 7 D 0 6 D S 2 9 D 3C 7 D 0 6 D S 2 9 C 3C 7 D 0 6 D S 2 9 B 3C 7 D 0 6 D S 2 9 A 3 0 . 6 2 50 . 8 7 51 . 0 3 51 . 2 9 51 . 5 5 5 1 5 5 . 5 81 6 1 . 9 31 6 5 . 9 91 7 2 . 5 91 7 9 . 2 0 C 7 D 5 0 D S 2 9 E 1C 7 D 5 0 D S 2 9 D 1C 7 D 5 0 D S 2 9 C 1C 7 D 5 0 D S 2 9 B 1C 7 D 5 0 D S 2 9 A 15 0 6 . 1 2 56 . 3 7 56 . 5 3 56 . 7 9 57 . 0 5 5 1 3 3 . 3 51 3 9 . 7 01 4 3 . 7 61 5 0 . 3 71 5 6 . 9 7 C 7 D 4 3 D S 2 9 E 1C 7 D 4 3 D S 2 9 D 1C 7 D 4 3 D S 2 9 C 1C 7 D 4 3 D S 2 9 B 1C 7 D 4 3 D S 2 9 A 14 3 5 . 2 5 05 . 5 0 05 . 6 6 05 . 9 2 06 . 1 8 0 1 2 3 . 8 31 3 0 . 1 81 3 4 . 2 41 4 0 . 8 41 4 7 . 4 5 C 7 D 4 0 D S 2 9 E 1C 7 D 4 0 D S 2 9 D 1C 7 D 4 0 D S 2 9 C 1C 7 D 4 0 D S 2 9 B 1C 7 D 4 0 D S 2 9 A 14 0 4 . 8 7 55 . 1 2 55 . 2 8 55 . 5 4 55 . 8 0 5 1 1 1 . 1 31 1 7 . 4 81 2 1 . 5 41 2 8 . 1 41 3 4 . 7 5 C 7 D 3 6 D S 2 9 E 1C 7 D 3 6 D S 2 9 D 1C 7 D 3 6 D S 2 9 C 1C 7 D 3 6 D S 2 9 B 1C 7 D 3 6 D S 2 9 A 13 6 4 . 3 7 54 . 6 2 54 . 7 8 55 . 0 4 55 . 3 0 5 1 0 7 . 9 51 1 4 . 3 01 1 8 . 3 61 2 4 . 9 71 3 1 . 5 7 C 7 D 3 5 D S 2 9 E 1C 7 D 3 5 D S 2 9 D 1C 7 D 3 5 D S 2 9 C 1C 7 D 3 5 D S 2 9 B 1C 7 D 3 5 D S 2 9 A 13 5 4 . 2 5 04 . 5 0 04 . 6 6 04 . 9 2 05 . 1 8 0 9 5 . 2 51 0 1 . 6 01 0 5 . 6 61 1 2 . 2 71 1 8 . 8 7 C 7 D 3 1 D S 2 9 E 1C 7 D 3 1 D S 2 9 D 1C 7 D 3 1 D S 2 9 C 1C 7 D 3 1 D S 2 9 B 1C 7 D 3 1 D S 2 9 A 13 1 3 . 7 5 04 . 0 0 04 . 1 6 04 . 4 2 04 . 6 8 0 9 2 . 0 89 8 . 4 31 0 2 . 4 91 0 9 . 0 91 1 5 . 7 0 C 7 D 3 0 D S 2 9 E 1C 7 D 3 0 D S 2 9 D 1C 7 D 3 0 D S 2 9 C 1C 7 D 3 0 D S 2 9 B 1C 7 D 3 0 D S 2 9 A 13 0 3 . 6 2 53 . 8 7 54 . 0 3 54 . 2 9 54 . 5 5 5 8 5 . 7 39 2 . 0 89 6 . 1 41 0 2 . 7 41 0 9 . 3 5 C 7 D 2 8 D S 2 9 E 1C 7 D 2 8 D S 2 9 D 1C 7 D 2 8 D S 2 9 C 1C 7 D 2 8 D S 2 9 B 1C 7 D 2 8 D S 2 9 A 12 8 3 . 3 7 53 . 6 2 53 . 7 8 54 . 0 4 54 . 3 0 5 7 6 . 2 08 2 . 5 58 6 . 6 19 3 . 2 29 9 . 8 2 C 7 D 2 5 D S 2 9 E 1C 7 D 2 5 D S 2 9 D 1C 7 D 2 5 D S 2 9 C 1C 7 D 2 5 D S 2 9 B 1C 7 D 2 5 D S 2 9 A 12 5 3 . 0 0 03 . 2 5 03 . 4 1 03 . 6 7 03 . 9 3 0 6 6 . 6 87 3 . 0 37 7 . 0 98 3 . 6 99 0 . 3 0 C 7 D 2 2 D S 2 9 E 1C 7 D 2 2 D S 2 9 D 1C 7 D 2 2 D S 2 9 C 1C 7 D 2 2 D S 2 9 B 1C 7 D 2 2 D S 2 9 A 12 2 2 . 6 2 52 . 8 7 53 . 0 3 53 . 2 9 53 . 5 5 5 5 3 . 9 86 0 . 3 36 4 . 3 97 0 . 9 97 7 . 6 0 C 7 D 1 8 D S 2 9 E 1C 7 D 1 8 D S 2 9 D 1C 7 D 1 8 D S 2 9 C 1C 7 D 1 8 D S 2 9 B 1C 7 D 1 8 D S 2 9 A 11 8 2 . 1 2 52 . 3 7 52 . 5 3 52 . 7 9 53 . 0 5 5 4 4 . 4 55 0 . 8 05 4 . 8 66 1 . 4 76 8 . 0 7 C 7 D 1 5 D S 2 9 E 1C 7 D 1 5 D S 2 9 D 1C 7 D 1 5 D S 2 9 C 1C 7 D 1 5 D S 2 9 B 1C 7 D 1 5 D S 2 9 A 11 5 1 . 7 5 02 . 0 0 02 . 1 6 02 . 4 2 02 . 6 8 0 2 8 . 5 83 4 . 9 33 8 . 9 94 5 . 5 95 2 . 2 0 C 7 D 1 0 D S 2 9 E 1C 7 D 1 0 D S 2 9 D 1C 7 D 1 0 D S 2 9 C 1C 7 D 1 0 D S 2 9 B 1C 7 D 1 0 D S 2 9 A 11 0 1 . 1 2 51 . 3 7 51 . 5 3 51 . 7 9 52 . 0 5 5 1 5 . 8 82 2 . 2 32 6 . 2 93 2 . 8 93 9 . 5 0 C 7 D 0 6 D S 2 9 E 1C 7 D 0 6 D S 2 9 D 1C 7 D 0 6 D S 2 9 C 1C 7 D 0 6 D S 2 9 B 1C 7 D 0 6 D S 2 9 A 1 0 . 6 2 50 . 8 7 51 . 0 3 51 . 2 9 51 . 5 5 5 i n s e r ti n s e r t P o s i t i o n s E a r s R e a d o u t M o u n t i n g D u a l F l u s hN oC e n t e r e dC e n t e r e dD i m e n s i o n s Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information -wooRt-wo R5]6.3 [0"25/ .e linerten C]83.1["25 .1 snioOtpar EgintnuMo of. oN shluF ar EgintnuMoar EgintnuMoar EgintnuMoar EgintnuMo ABCDE8]3.1 [5"12.ddeeahTr 404-8]3.1 [5"12.ddeeahTr 404- leo HuhTrleo HuhTr ”)“JM. (ID ].595 [20 .2htgen LailT 6 37 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 5 5 . 5 81 6 1 . 9 31 6 5 . 9 91 7 2 . 5 91 7 9 . 2 0 C 7 D 5 0 D S 2 9 E 4C 7 D 5 0 D S 2 9 D 4C 7 D 5 0 D S 2 9 C 4C 7 D 5 0 D S 2 9 B 4C 7 D 5 0 D S 2 9 A 45 0 6 . 1 2 56 . 3 7 56 . 5 3 56 . 7 9 57 . 0 5 5 1 3 3 . 3 51 3 9 . 7 01 4 3 . 7 61 5 0 . 3 71 5 6 . 9 7 C 7 D 4 3 D S 2 9 E 4C 7 D 4 3 D S 2 9 D 4C 7 D 4 3 D S 2 9 C 4C 7 D 4 3 D S 2 9 B 4C 7 D 4 3 D S 2 9 A 44 3 5 . 2 5 05 . 5 0 05 . 6 6 05 . 9 2 06 . 1 8 0 1 2 3 . 8 31 3 0 . 1 81 3 4 . 2 41 4 0 . 8 41 4 7 . 4 5 C 7 D 4 0 D S 2 9 E 4C 7 D 4 0 D S 2 9 D 4C 7 D 4 0 D S 2 9 C 4C 7 D 4 0 D S 2 9 B 4C 7 D 4 0 D S 2 9 A 44 0 4 . 8 7 55 . 1 2 55 . 2 8 55 . 5 4 55 . 8 0 5 1 1 1 . 1 31 1 7 . 4 81 2 1 . 5 41 2 8 . 1 41 3 4 . 7 5 C 7 D 3 6 D S 2 9 E 4C 7 D 3 6 D S 2 9 D 4C 7 D 3 6 D S 2 9 C 4C 7 D 3 6 D S 2 9 B 4C 7 D 3 6 D S 2 9 A 43 6 4 . 3 7 54 . 6 2 54 . 7 8 55 . 0 4 55 . 3 0 5 1 0 7 . 9 51 1 4 . 3 01 1 8 . 3 61 2 4 . 9 71 3 1 . 5 7 C 7 D 3 5 D S 2 9 E 4C 7 D 3 5 D S 2 9 D 4C 7 D 3 5 D S 2 9 C 4C 7 D 3 5 D S 2 9 B 4C 7 D 3 5 D S 2 9 A 43 5 4 . 2 5 04 . 5 0 04 . 6 6 04 . 9 2 05 . 1 8 0 9 5 . 2 51 0 1 . 6 01 0 5 . 6 61 1 2 . 2 71 1 8 . 8 7 C 7 D 3 1 D S 2 9 E 4C 7 D 3 1 D S 2 9 D 4C 7 D 3 1 D S 2 9 C 4C 7 D 3 1 D S 2 9 B 4C 7 D 3 1 D S 2 9 A 43 1 3 . 7 5 04 . 0 0 04 . 1 6 04 . 4 2 04 . 6 8 0 9 2 . 0 89 8 . 4 31 0 2 . 4 91 0 9 . 0 91 1 5 . 7 0 C 7 D 3 0 D S 2 9 E 4C 7 D 3 0 D S 2 9 D 4C 7 D 3 0 D S 2 9 C 4C 7 D 3 0 D S 2 9 B 4C 7 D 3 0 D S 2 9 A 43 0 3 . 6 2 53 . 8 7 54 . 0 3 54 . 2 9 54 . 5 5 5 8 5 . 7 39 2 . 0 89 6 . 1 41 0 2 . 7 41 0 9 . 3 5 C 7 D 2 8 D S 2 9 E 4C 7 D 2 8 D S 2 9 D 4C 7 D 2 8 D S 2 9 C 4C 7 D 2 8 D S 2 9 B 4C 7 D 2 8 D S 2 9 A 42 8 3 . 3 7 53 . 6 2 53 . 7 8 54 . 0 4 54 . 3 0 5 7 6 . 2 08 2 . 5 58 6 . 6 19 3 . 2 29 9 . 8 2 C 7 D 2 5 D S 2 9 E 4C 7 D 2 5 D S 2 9 D 4C 7 D 2 5 D S 2 9 C 4C 7 D 2 5 D S 2 9 B 4C 7 D 2 5 D S 2 9 A 42 5 3 . 0 0 03 . 2 5 03 . 4 1 03 . 6 7 03 . 9 3 0 6 6 . 6 87 3 . 0 37 7 . 0 98 3 . 6 99 0 . 3 0 C 7 D 2 2 D S 2 9 E 4C 7 D 2 2 D S 2 9 D 4C 7 D 2 2 D S 2 9 C 4C 7 D 2 2 D S 2 9 B 4C 7 D 2 2 D S 2 9 A 42 2 2 . 6 2 52 . 8 7 53 . 0 3 53 . 2 9 53 . 5 5 5 5 3 . 9 86 0 . 3 36 4 . 3 97 0 . 9 97 7 . 6 0 C 7 D 1 8 D S 2 9 E 4C 7 D 1 8 D S 2 9 D 4C 7 D 1 8 D S 2 9 C 4C 7 D 1 8 D S 2 9 B 4C 7 D 1 8 D S 2 9 A 41 8 2 . 1 2 52 . 3 7 52 . 5 3 52 . 7 9 53 . 0 5 5 4 4 . 4 55 0 . 8 05 4 . 8 66 1 . 4 76 8 . 0 7 C 7 D 1 5 D S 2 9 E 4C 7 D 1 5 D S 2 9 D 4C 7 D 1 5 D S 2 9 C 4C 7 D 1 5 D S 2 9 B 4C 7 D 1 5 D S 2 9 A 41 5 1 . 7 5 02 . 0 0 02 . 1 6 02 . 4 2 02 . 6 8 0 2 8 . 5 83 4 . 9 33 8 . 9 94 5 . 5 95 2 . 2 0 C 7 D 1 0 D S 2 9 E 4C 7 D 1 0 D S 2 9 D 4C 7 D 1 0 D S 2 9 C 4C 7 D 1 0 D S 2 9 B 4C 7 D 1 0 D S 2 9 A 41 0 1 . 1 2 51 . 3 7 51 . 5 3 51 . 7 9 52 . 0 5 5 1 5 . 8 82 2 . 2 32 6 . 2 93 2 . 8 93 9 . 5 0 C 7 D 0 6 D S 2 9 E 4C 7 D 0 6 D S 2 9 D 4C 7 D 0 6 D S 2 9 C 4C 7 D 0 6 D S 2 9 B 4C 7 D 0 6 D S 2 9 A 4 0 . 6 2 50 . 8 7 51 . 0 3 51 . 2 9 51 . 5 5 5 i n s e r ti n s e r t P o s i t i o n s E a r s R e a d o u t M o u n t i n g D u a l F l u s hN oC e n t e r e dC e n t e r e dD i m e n s i o n s Card Edge Connectors (Solder Type, Board-to-Board) Cantilever Series .156 x .200 [3.96 x 5.08] Centerline, Dip Solder Tails, .300 [7.62] Card Slot Depth Product Facts nRecognized under the Component Program of Underwriters .020±.010 Laboratories Inc.,Contact Gap [.51±.25] File No. E60980 .145 .300nCertified[3.68]Card Slot Depth [7.62] by Canadian Standards Association, File No. LR49571 DJ .200 E[5.08] Physical Properties: Insulation Resistance—5000 megohms minimum. .370Insertion/Withdrawal Force [9.40] (Daughter Card)—8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. .156 Typ.Insulator Body—Glass filled [3.96] thermoplastic, UL rating 94V-O. High Btemp. plastic option is available; add suffix M399 to part number. Color—Black A Contacts—High strength copper alloy. CContact Plating—.000050 [0.00127] nickel underplate with .000030.250 [6.35][0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum .610 [15.49] Electrical Properties: Operation Voltage—1500 VDC (sea level) .180.060 Current Rating—3 Amperes[4.57][1.52] Initial Contact Resistance— .020 Typ. Dia. 10 milliohms[0.51] E Environmental Properties: Operating Temperature— Dim B -55˚C to +125˚C Temperature Cycling—Dim E .040±.003.128Dia.MIL-STD-202 method 107Dia.[1.02±.08] [3.25] Vibration—MIL-STD-202 method 204 Related Product Data: .200 Daughter Card Edge Pattern— [5.08] page 57.156 [3.96] Mounting Styles .125 Dia.#4-40[3.18] .125 Dia. [3.18] .250.250 [6.35][6.35] Centered Mounting EarCentered Mounting EarFlush Mounting Ear Flush Mounting Ear No Mounting Ears .125 [3.18] Thru Hole4-40 Threaded Insert.125 [3.18] Thru Hole4-40 Threaded Insert 38 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information -wooRt-wo R8]5.0 [0"20/ .e linerten C]63.9["56 .1 snioOtpar EgintnuMo of. oN shluF ar EgintnuMoar EgintnuMoar EgintnuMoar EgintnuMo ABCDE8]3.1 [5"12.ddeeahTr 404-8]3.1 [5"12.ddeeahTr 404- leo HuhTrleo HuhTr ”)“JM. (ID ].303 [30 .1htgen LailT 6 ”)“JM. (ID ].064 [60 .1htgen LailT 6 39 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 9 4 . 1 62 0 2 . 2 92 0 5 . 3 62 1 3 . 3 12 1 9 . 6 6 C 6 D 5 0 D S 2 9 E 3C 6 D 5 0 D S 2 9 D 3C 6 D 5 0 D S 2 9 C 3C 6 D 5 0 D S 2 9 B 3C 6 D 5 0 D S 2 9 A 35 0 7 . 6 4 47 . 9 6 48 . 0 8 58 . 3 9 88 . 6 4 8 1 6 6 . 4 21 7 4 . 5 51 7 7 . 6 21 8 5 . 5 71 9 1 . 9 2 C 6 D 4 3 D S 2 9 E 3C 6 D 4 3 D S 2 9 D 3C 6 D 4 3 D S 2 9 C 3C 6 D 4 3 D S 2 9 B 3C 6 D 4 3 D S 2 9 A 34 3 6 . 5 5 26 . 8 7 26 . 9 9 37 . 3 0 67 . 5 5 6 1 5 4 . 5 61 6 2 . 6 61 6 5 . 7 41 7 3 . 6 91 8 0 . 0 4 C 6 D 4 0 D S 2 9 E 3C 6 D 4 0 D S 2 9 D 3C 6 D 4 0 D S 2 9 C 3C 6 D 4 0 D S 2 9 B 3C 6 D 4 0 D S 2 9 A 34 0 6 . 0 8 56 . 4 0 46 . 5 2 56 . 8 3 87 . 0 8 8 1 3 8 . 6 81 4 6 . 8 11 4 9 . 8 91 5 7 . 8 41 6 4 . 1 9 C 6 D 3 6 D S 2 9 E 3C 6 D 3 6 D S 2 9 D 3C 6 D 3 6 D S 2 9 C 3C 6 D 3 6 D S 2 9 B 3C 6 D 3 6 D S 2 9 A 33 6 5 . 4 6 05 . 7 8 05 . 9 0 16 . 2 1 46 . 4 6 4 1 3 4 . 7 21 4 2 . 8 51 4 5 . 9 21 5 3 . 8 71 6 0 . 2 2 C 6 D 3 5 D S 2 9 E 3C 6 D 3 5 D S 2 9 D 3C 6 D 3 5 D S 2 9 C 3C 6 D 3 5 D S 2 9 B 3C 6 D 3 5 D S 2 9 A 33 5 5 . 3 0 45 . 6 2 45 . 7 4 56 . 0 5 86 . 3 0 8 1 1 8 . 8 71 2 7 . 0 01 3 0 . 0 71 3 8 . 0 21 4 4 . 3 7 C 6 D 3 1 D S 2 9 E 3C 6 D 3 1 D S 2 9 D 3C 6 D 3 1 D S 2 9 C 3C 6 D 3 1 D S 2 9 B 3C 6 D 3 1 D S 2 9 A 33 1 4 . 6 8 05 . 0 0 05 . 1 2 15 . 4 3 45 . 6 8 4 1 1 4 . 9 11 2 3 . 0 41 2 6 . 1 11 3 4 . 0 61 4 0 . 4 1 C 6 D 3 0 D S 2 9 E 3C 6 D 3 0 D S 2 9 D 3C 6 D 3 0 D S 2 9 C 3C 6 D 3 0 D S 2 9 B 3C 6 D 3 0 D S 2 9 A 33 0 4 . 5 2 44 . 8 4 44 . 9 6 55 . 2 7 85 . 5 2 8 1 0 6 . 9 81 1 5 . 1 11 1 8 . 1 91 2 6 . 1 41 3 2 . 4 9 C 6 D 2 8 D S 2 9 E 3C 6 D 2 8 D S 2 9 D 3C 6 D 2 8 D S 2 9 C 3C 6 D 2 8 D S 2 9 B 3C 6 D 2 8 D S 2 9 A 32 8 4 . 2 1 24 . 5 3 24 . 6 5 34 . 9 6 65 . 2 1 6 9 5 . 1 01 0 3 . 2 31 0 6 . 3 01 1 4 . 2 51 2 0 . 6 0 C 6 D 2 5 D S 2 9 E 3C 6 D 2 5 D S 2 9 D 3C 6 D 2 5 D S 2 9 C 3C 6 D 2 5 D S 2 9 B 3C 6 D 2 5 D S 2 9 A 32 5 3 . 7 4 44 . 0 6 44 . 1 8 54 . 4 9 84 . 7 4 8 8 3 . 2 19 1 . 3 19 4 . 4 11 0 2 . 3 61 0 8 . 7 1 C 6 D 2 2 D S 2 9 E 3C 6 D 2 2 D S 2 9 D 3C 6 D 2 2 D S 2 9 C 3C 6 D 2 2 D S 2 9 B 3C 6 D 2 2 D S 2 9 A 32 2 3 . 2 7 63 . 5 9 53 . 7 1 74 . 0 3 04 . 2 8 0 7 5 . 2 98 3 . 4 18 6 . 4 99 4 . 4 41 0 0 . 7 9 C 6 D 2 0 D S 2 9 E 3C 6 D 2 0 D S 2 9 D 3C 6 D 2 0 D S 2 9 C 3C 6 D 2 0 D S 2 9 B 3C 6 D 2 0 D S 2 9 A 32 0 2 . 9 6 43 . 2 8 43 . 4 0 53 . 7 1 83 . 9 6 8 6 7 . 3 67 5 . 4 97 8 . 5 68 6 . 5 19 2 . 8 6 C 6 D 1 8 D S 2 9 E 3C 6 D 1 8 D S 2 9 D 3C 6 D 1 8 D S 2 9 C 3C 6 D 1 8 D S 2 9 B 3C 6 D 1 8 D S 2 9 A 31 8 2 . 6 5 22 . 9 7 23 . 0 9 33 . 4 0 63 . 6 5 6 5 5 . 4 76 3 . 6 06 6 . 6 87 4 . 6 38 0 . 9 8 C 6 D 1 5 D S 2 9 E 3C 6 D 1 5 D S 2 9 D 3C 6 D 1 5 D S 2 9 C 3C 6 D 1 5 D S 2 9 B 3C 6 D 1 5 D S 2 9 A 31 5 2 . 1 8 42 . 5 0 42 . 6 2 52 . 9 3 83 . 1 8 8 4 3 . 5 95 1 . 7 15 4 . 7 96 2 . 7 46 9 . 0 9 C 6 D 1 2 D S 2 9 E 3C 6 D 1 2 D S 2 9 D 3C 6 D 1 2 D S 2 9 C 3C 6 D 1 2 D S 2 9 B 3C 6 D 1 2 D S 2 9 A 31 2 1 . 7 1 62 . 0 3 62 . 1 5 72 . 4 7 02 . 7 2 0 3 5 . 6 64 3 . 7 94 6 . 8 65 4 . 8 16 1 . 1 6 C 6 D 1 0 D S 2 9 E 3C 6 D 1 0 D S 2 9 D 3C 6 D 1 0 D S 2 9 C 3C 6 D 1 0 D S 2 9 B 3C 6 D 1 0 D S 2 9 A 31 0 1 . 4 0 41 . 7 2 41 . 8 4 52 . 1 5 82 . 4 0 8 1 9 . 8 12 7 . 9 43 1 . 0 13 8 . 9 64 5 . 3 1 C 6 D 0 6 D S 2 9 E 3C 6 D 0 6 D S 2 9 D 3C 6 D 0 6 D S 2 9 C 3C 6 D 0 6 D S 2 9 B 3C 6 D 0 6 D S 2 9 A 3 0 . 7 8 01 . 1 0 01 . 2 2 11 . 5 3 41 . 7 8 4 1 9 4 . 1 62 0 2 . 2 92 0 5 . 3 62 1 3 . 3 12 1 9 . 6 6 C 6 D 5 0 D S 2 9 E 1C 6 D 5 0 D S 2 9 D 1C 6 D 5 0 D S 2 9 C 1C 6 D 5 0 D S 2 9 B 1C 6 D 5 0 D S 2 9 A 15 0 7 . 6 4 47 . 9 6 48 . 0 8 58 . 3 9 88 . 6 4 8 1 6 6 . 4 21 7 4 . 5 51 7 7 . 6 21 8 5 . 5 71 9 1 . 9 2 C 6 D 4 3 D S 2 9 E 1C 6 D 4 3 D S 2 9 D 1C 6 D 4 3 D S 2 9 C 1C 6 D 4 3 D S 2 9 B 1C 6 D 4 3 D S 2 9 A 14 3 6 . 5 5 26 . 8 7 26 . 9 9 37 . 3 0 67 . 5 5 6 1 5 4 . 5 61 6 2 . 6 61 6 5 . 7 41 7 3 . 6 91 8 0 . 0 4 C 6 D 4 0 D S 2 9 E 1C 6 D 4 0 D S 2 9 D 1C 6 D 4 0 D S 2 9 C 1C 6 D 4 0 D S 2 9 B 1C 6 D 4 0 D S 2 9 A 14 0 6 . 0 8 56 . 4 0 46 . 5 2 56 . 8 3 87 . 0 8 8 1 3 8 . 6 81 4 6 . 8 11 4 9 . 8 91 5 7 . 8 41 6 4 . 1 9 C 6 D 3 6 D S 2 9 E 1C 6 D 3 6 D S 2 9 D 1C 6 D 3 6 D S 2 9 C 1C 6 D 3 6 D S 2 9 B 1C 6 D 3 6 D S 2 9 A 13 6 5 . 4 6 05 . 7 8 05 . 9 0 16 . 2 1 46 . 4 6 4 1 3 4 . 7 21 4 2 . 8 51 4 5 . 9 21 5 3 . 8 71 6 0 . 2 2 C 6 D 3 5 D S 2 9 E 1C 6 D 3 5 D S 2 9 D 1C 6 D 3 5 D S 2 9 C 1C 6 D 3 5 D S 2 9 B 1C 6 D 3 5 D S 2 9 A 13 5 5 . 3 0 45 . 6 2 45 . 7 4 56 . 0 5 86 . 3 0 8 1 1 8 . 8 71 2 7 . 0 01 3 0 . 0 71 3 8 . 0 21 4 4 . 3 7 C 6 D 3 1 D S 2 9 E 1C 6 D 3 1 D S 2 9 D 1C 6 D 3 1 D S 2 9 C 1C 6 D 3 1 D S 2 9 B 1C 6 D 3 1 D S 2 9 A 13 1 4 . 6 8 05 . 0 0 05 . 1 2 15 . 4 3 45 . 6 8 4 1 1 4 . 9 11 2 3 . 0 41 2 6 . 1 11 3 4 . 0 61 4 0 . 4 1 C 6 D 3 0 D S 2 9 E 1C 6 D 3 0 D S 2 9 D 1C 6 D 3 0 D S 2 9 C 1C 6 D 3 0 D S 2 9 B 1C 6 D 3 0 D S 2 9 A 13 0 4 . 5 2 44 . 8 4 44 . 9 6 55 . 2 7 85 . 5 2 8 1 0 6 . 9 81 1 5 . 1 11 1 8 . 1 91 2 6 . 1 41 3 2 . 4 9 C 6 D 2 8 D S 2 9 E 1C 6 D 2 8 D S 2 9 D 1C 6 D 2 8 D S 2 9 C 1C 6 D 2 8 D S 2 9 B 1C 6 D 2 8 D S 2 9 A 12 8 4 . 2 1 24 . 5 3 24 . 6 5 34 . 9 6 65 . 2 1 6 9 5 . 1 01 0 3 . 2 31 0 6 . 3 01 1 4 . 2 51 2 0 . 6 0 C 6 D 2 5 D S 2 9 E 1C 6 D 2 5 D S 2 9 D 1C 6 D 2 5 D S 2 9 C 1C 6 D 2 5 D S 2 9 B 1C 6 D 2 5 D S 2 9 A 12 5 3 . 7 4 44 . 0 6 44 . 1 8 54 . 4 9 84 . 7 4 8 8 3 . 2 19 1 . 3 19 4 . 4 11 0 2 . 3 61 0 8 . 7 1 C 6 D 2 2 D S 2 9 E 1C 6 D 2 2 D S 2 9 D 1C 6 D 2 2 D S 2 9 C 1C 6 D 2 2 D S 2 9 B 1C 6 D 2 2 D S 2 9 A 12 2 3 . 2 7 63 . 5 9 53 . 7 1 74 . 0 3 04 . 2 8 0 7 5 . 2 98 3 . 4 18 6 . 4 99 4 . 4 41 0 0 . 7 9 C 6 D 2 0 D S 2 9 E 1C 6 D 2 0 D S 2 9 D 1C 6 D 2 0 D S 2 9 C 1C 6 D 2 0 D S 2 9 B 1C 6 D 2 0 D S 2 9 A 12 0 2 . 9 6 43 . 2 8 43 . 4 0 53 . 7 1 83 . 9 6 8 6 7 . 3 67 5 . 4 97 8 . 5 68 6 . 5 19 2 . 8 6 C 6 D 1 8 D S 2 9 E 1C 6 D 1 8 D S 2 9 D 1C 6 D 1 8 D S 2 9 C 1C 6 D 1 8 D S 2 9 B 1C 6 D 1 8 D S 2 9 A 11 8 2 . 6 5 22 . 9 7 23 . 0 9 33 . 4 0 63 . 6 5 6 5 5 . 4 76 3 . 6 06 6 . 6 87 4 . 6 38 0 . 9 8 C 6 D 1 5 D S 2 9 E 1C 6 D 1 5 D S 2 9 D 1C 6 D 1 5 D S 2 9 C 1C 6 D 1 5 D S 2 9 B 1C 6 D 1 5 D S 2 9 A 11 5 2 . 1 8 42 . 5 0 42 . 6 2 52 . 9 3 83 . 1 8 8 4 3 . 5 95 1 . 7 15 4 . 7 96 2 . 7 46 9 . 0 9 C 6 D 1 2 D S 2 9 E 1C 6 D 1 2 D S 2 9 D 1C 6 D 1 2 D S 2 9 C 1C 6 D 1 2 D S 2 9 B 1C 6 D 1 2 D S 2 9 A 11 2 1 . 7 1 62 . 0 3 62 . 1 5 72 . 4 7 02 . 7 2 0 3 5 . 6 64 3 . 7 94 6 . 8 65 4 . 8 16 1 . 1 6 C 6 D 1 0 D S 2 9 E 1C 6 D 1 0 D S 2 9 D 1C 6 D 1 0 D S 2 9 C 1C 6 D 1 0 D S 2 9 B 1C 6 D 1 0 D S 2 9 A 11 0 1 . 4 0 41 . 7 2 41 . 8 4 52 . 1 5 82 . 4 0 8 1 9 . 8 12 7 . 9 43 1 . 0 13 8 . 9 64 5 . 3 1 C 6 D 0 6 D S 2 9 E 1C 6 D 0 6 D S 2 9 D 1C 6 D 0 6 D S 2 9 C 1C 6 D 0 6 D S 2 9 B 1C 6 D 0 6 D S 2 9 A 1 0 . 7 8 01 . 1 0 01 . 2 2 11 . 5 3 41 . 7 8 4 i n s e r ti n s e r t P o s i t i o n s E a r s R e a d o u t M o u n t i n g D u a l F l u s hN oC e n t e r e dC e n t e r e dD i m e n s i o n s Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information -wooRt-wo R8]5.0 [0"20/ .e linerten C]63.9["56 .1 snioOtpar EgintnuMo of. oN shluF ar EgintnuMoar EgintnuMoar EgintnuMoar EgintnuMo ABCDE8]3.1 [5"12.ddeeahTr 404-8]3.1 [5"12.ddeeahTr 404- leo HuhTr )J” “IM.D (]95.5["20 .2htgen LailT 6 40 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 9 4 . 1 62 0 2 . 2 92 0 5 . 3 62 1 3 . 3 12 1 9 . 6 6 C 6 D 5 0 D S 2 9 E 4C 6 D 5 0 D S 2 9 D 4C 6 D 5 0 D S 2 9 C 4C 6 D 5 0 D S 2 9 B 4C 6 D 5 0 D S 2 9 A 45 0 7 . 6 4 47 . 9 6 48 . 0 8 58 . 3 9 88 . 6 4 8 1 6 6 . 4 21 7 4 . 5 51 7 7 . 6 21 8 5 . 5 71 9 1 . 9 2 C 6 D 4 3 D S 2 9 E 4C 6 D 4 3 D S 2 9 D 4C 6 D 4 3 D S 2 9 C 4C 6 D 4 3 D S 2 9 B 4C 6 D 4 3 D S 2 9 A 44 3 6 . 5 5 26 . 8 7 26 . 9 9 37 . 3 0 67 . 5 5 6 1 5 4 . 5 61 6 2 . 6 61 6 5 . 7 41 7 3 . 6 91 8 0 . 0 4 C 6 D 4 0 D S 2 9 E 4C 6 D 4 0 D S 2 9 D 4C 6 D 4 0 D S 2 9 C 4C 6 D 4 0 D S 2 9 B 4C 6 D 4 0 D S 2 9 A 44 0 6 . 0 8 56 . 4 0 46 . 5 2 56 . 8 3 87 . 0 8 8 1 3 8 . 6 81 4 6 . 8 11 4 9 . 8 91 5 7 . 8 41 6 4 . 1 9 C 6 D 3 6 D S 2 9 E 4C 6 D 3 6 D S 2 9 D 4C 6 D 3 6 D S 2 9 C 4C 6 D 3 6 D S 2 9 B 4C 6 D 3 6 D S 2 9 A 43 6 5 . 4 6 05 . 7 8 05 . 9 0 16 . 2 1 46 . 4 6 4 1 3 4 . 7 21 4 2 . 8 51 4 5 . 9 21 5 3 . 8 71 6 0 . 2 2 C 6 D 3 5 D S 2 9 E 4C 6 D 3 5 D S 2 9 D 4C 6 D 3 5 D S 2 9 C 4C 6 D 3 5 D S 2 9 B 4C 6 D 3 5 D S 2 9 A 43 5 5 . 3 0 45 . 6 2 45 . 7 4 56 . 0 5 86 . 3 0 8 1 1 8 . 8 71 2 7 . 0 01 3 0 . 0 71 3 8 . 0 21 4 4 . 3 7 C 6 D 3 1 D S 2 9 E 4C 6 D 3 1 D S 2 9 D 4C 6 D 3 1 D S 2 9 C 4C 6 D 3 1 D S 2 9 B 4C 6 D 3 1 D S 2 9 A 43 1 4 . 6 8 05 . 0 0 05 . 1 2 15 . 4 3 45 . 6 8 4 1 1 4 . 9 11 2 3 . 0 41 2 6 . 1 11 3 4 . 0 61 4 0 . 4 1 C 6 D 3 0 D S 2 9 E 4C 6 D 3 0 D S 2 9 D 4C 6 D 3 0 D S 2 9 C 4C 6 D 3 0 D S 2 9 B 4C 6 D 3 0 D S 2 9 A 43 0 4 . 5 2 44 . 8 4 44 . 9 6 55 . 2 7 85 . 5 2 8 1 0 6 . 9 81 1 5 . 1 11 1 8 . 1 91 2 6 . 1 41 3 2 . 4 9 C 6 D 2 8 D S 2 9 E 4C 6 D 2 8 D S 2 9 D 4C 6 D 2 8 D S 2 9 C 4C 6 D 2 8 D S 2 9 B 4C 6 D 2 8 D S 2 9 A 42 8 4 . 2 1 24 . 5 3 24 . 6 5 34 . 9 6 65 . 2 1 6 9 5 . 1 01 0 3 . 2 31 0 6 . 3 01 1 4 . 2 51 2 0 . 6 0 C 6 D 2 5 D S 2 9 E 4C 6 D 2 5 D S 2 9 D 4C 6 D 2 5 D S 2 9 C 4C 6 D 2 5 D S 2 9 B 4C 6 D 2 5 D S 2 9 A 42 5 3 . 7 4 44 . 0 6 44 . 1 8 54 . 4 9 84 . 7 4 8 8 3 . 2 19 1 . 3 19 4 . 4 11 0 2 . 3 61 0 8 . 7 1 C 6 D 2 2 D S 2 9 E 4C 6 D 2 2 D S 2 9 D 4C 6 D 2 2 D S 2 9 C 4C 6 D 2 2 D S 2 9 B 4C 6 D 2 2 D S 2 9 A 42 2 3 . 2 7 63 . 5 9 53 . 7 1 74 . 0 3 04 . 2 8 0 7 5 . 2 98 3 . 4 18 6 . 4 99 4 . 4 41 0 0 . 7 9 C 6 D 2 0 D S 2 9 E 4C 6 D 2 0 D S 2 9 D 4C 6 D 2 0 D S 2 9 C 4C 6 D 2 0 D S 2 9 B 4C 6 D 2 0 D S 2 9 A 42 0 2 . 9 6 43 . 2 8 43 . 4 0 53 . 7 1 83 . 9 6 8 6 7 . 3 67 5 . 4 97 8 . 5 68 6 . 5 19 2 . 8 6 C 6 D 1 8 D S 2 9 E 4C 6 D 1 8 D S 2 9 D 4C 6 D 1 8 D S 2 9 C 4C 6 D 1 8 D S 2 9 B 4C 6 D 1 8 D S 2 9 A 41 8 2 . 6 5 22 . 9 7 23 . 0 9 33 . 4 0 63 . 6 5 6 5 5 . 4 76 3 . 6 06 6 . 6 87 4 . 6 38 0 . 9 8 C 6 D 1 5 D S 2 9 E 4C 6 D 1 5 D S 2 9 D 4C 6 D 1 5 D S 2 9 C 4C 6 D 1 5 D S 2 9 B 4C 6 D 1 5 D S 2 9 A 41 5 2 . 1 8 42 . 5 0 42 . 6 2 52 . 9 3 83 . 1 8 8 4 3 . 5 95 1 . 7 15 4 . 7 96 2 . 7 46 9 . 0 9 C 6 D 1 2 D S 2 9 E 4C 6 D 1 2 D S 2 9 D 4C 6 D 1 2 D S 2 9 C 4C 6 D 1 2 D S 2 9 B 4C 6 D 1 2 D S 2 9 A 41 2 1 . 7 1 62 . 0 3 62 . 1 5 72 . 4 7 02 . 7 2 0 3 5 . 6 64 3 . 7 94 6 . 8 65 4 . 8 16 1 . 1 6 C 6 D 1 0 D S 2 9 E 4C 6 D 1 0 D S 2 9 D 4C 6 D 1 0 D S 2 9 C 4C 6 D 1 0 D S 2 9 B 4C 6 D 1 0 D S 2 9 A 41 0 1 . 4 0 41 . 7 2 41 . 8 4 52 . 1 5 82 . 4 0 8 1 9 . 8 12 7 . 9 43 1 . 0 13 8 . 9 64 5 . 3 1 C 6 D 0 6 D S 2 9 E 4C 6 D 0 6 D S 2 9 D 4C 6 D 0 6 D S 2 9 C 4C 6 D 0 6 D S 2 9 B 4C 6 D 0 6 D S 2 9 A 4 0 . 7 8 01 . 1 0 01 . 2 2 11 . 5 3 41 . 7 8 4 i n s e r ti n s e r tT h r uH o l e P o s i t i o n s E a r s R e a d o u t M o u n t i n g D u a l F l u s hN oC e n t e r e dC e n t e r e dD i m e n s i o n s Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Card Edge Connectors Product Facts nSizes from 6 to 65 dual positions. nContact mating surface optimizes reliability by concentrating the normal force in the actual contact area. nMounting ear options accommodate both Panel and PC Board attachment. nSolder stand-offs facilitate cleaning. nBifurcated contact design provides redundant points of contact to maximize reliability. n Tail lengths available to accommodate .062" [1.57] through .125" Bifurcated contact design provides maximum reliability [3.18] thick PCB Boards and Wire Wrap Description/Application termination. The modified bellows card nStraight or Right Angle edge connectors are dual contact configurations. readout and are designed for reliable termination to double sided PCB boards. Modified Bellows The modified bellows card edge connector offers a variety of tail lengths for sol- der and wire wrap applica- tions. Contacts are available in straight tail or right angle configurations to meet your individual pur- pose. The modified bellows line of connectors offers a variety of card slot depths and has optional high tem- perature plastic insulators. 41 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors .100 x .200 [2.54 x 5.08], Straight Dip Solder And Wire Wrap Tails Product Facts .054 - .071 nRecognized under theP.C. Board [1.37 - 1.80] Component Program of Underwriters .300 Card Depth [7.62] Laboratories Inc., .610 File No. E60980[15.49] nCertified by Canadian Standards Association, File No. LR49571 SECTION X-XJ ROTATED 90º Physical Properties: Insulation Resistance—5000 megohms minimum..200 [5.08] Insertion/Withdrawal Force .025 Sq(Daughter Card)—8 oz./2 oz. [.64] [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. Insulator Body—Glass filled thermoplastic, UL rating 94V-O. HighC temp. plastic option is available; add D suffix M399 to part number. Color—Black .100 Contacts—High strength copper alloy.Ref. [2.54] .368 Contact Plating—.000050 [0.00127][9.53]SECTION X-X nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: E Operation Voltage—600 VDC (sea level)B Current Rating—3 Amperes A Initial Contact Resistance— 10 milliohms Environmental Properties: Operating Temperature— -55˚C to +125˚CDim B Temperature Cycling— Dim E MIL-STD-202 method 107.128 Dia. [3.25] Vibration—MIL-STD-202 method 204 Related Product Data: .200 Polarization Key—page 57 [5.08] .100 Daughter Card Edge Pattern— .100[2.54] page 57 P=.040 [1.02] Dip Solder Applications P=.042 [1.07] For Wire Wrap Applications Mounting Styles .250 [6.35] .610 Ref. [15.49] Centered Mounting EarCentered Mounting EarNo Mounting EarsFlush Mounting EarFlush Mounting Ear .180.125 [3.18] Thru Hole4-40 Threaded Insert.125 [3.18] Thru Hole4-40 Threaded Insert [4.57] 42 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information -wooRt-wo R8]5.0 [0"20/ .e linerten C]42.5["00 .1 snioOtpar EgintnuMo of. oN shluF ar EgintnuMoar EgintnuMoar EgintnuMoar EgintnuMo ABCDE 8]3.1 [5"12.ddeeahTr 404-8]3.1 [5"12.ddeeahTr 404- leo HuhTrleo HuhTr ”)“JIM D (]64.0["60 .1htgen LailT —— –– –– –– –– –– –– –– –– –– Tail Length .220" [5.59] (DIM “J”) –– –– –– –– –– –– –– –– 43 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 0 6 . 6 81 1 1 . 7 61 1 5 . 8 21 2 3 . 8 31 3 0 . 4 3 A 8 D 4 3 D S 2 9 C 3A 8 D 4 3 D S 2 9 B 3A 8 D 4 3 D S 2 9 A 34 3 4 . 2 0 04 . 4 0 04 . 5 6 04 . 8 7 55 . 1 3 5 9 9 . 0 61 0 4 . 1 41 0 8 . 2 01 1 6 . 2 11 2 2 . 8 1 A 8 D 4 0 D S 2 9 C 3A 8 D 4 0 D S 2 9 B 3A 8 D 4 0 D S 2 9 A 34 0 3 . 9 0 04 . 1 0 04 . 2 6 04 . 5 7 54 . 8 3 5 8 8 . 9 09 3 . 9 89 8 . 0 41 0 6 . 0 51 1 2 . 6 5 A 8 D 3 6 D S 2 9 C 3A 8 D 3 6 D S 2 9 B 3A 8 D 3 6 D S 2 9 A 33 6 3 . 5 0 03 . 7 0 03 . 8 6 04 . 1 7 54 . 4 3 5 8 6 . 3 69 1 . 4 49 5 . 5 01 0 3 . 5 11 1 0 . 1 1 A 8 D 3 5 D S 2 9 C 3A 8 D 3 5 D S 2 9 B 3A 8 D 3 5 D S 2 9 A 33 5 3 . 4 0 03 . 6 0 03 . 7 6 04 . 0 7 54 . 3 3 5 7 8 . 7 48 1 . 2 88 5 . 3 49 3 . 3 59 9 . 9 5 A 8 D 3 1 D S 2 9 E 3A 8 D 3 1 D S 2 9 D 3A 8 D 3 1 D S 2 9 C 3A 8 D 3 1 D S 2 9 B 3A 8 D 3 1 D S 2 9 A 33 1 3 . 1 0 03 . 2 0 03 . 3 6 03 . 6 7 53 . 9 3 5 7 3 . 6 67 8 . 7 48 2 . 8 09 0 . 8 19 7 . 4 1 A 8 D 3 0 D S 2 9 E 3A 8 D 3 0 D S 2 9 D 3A 8 D 3 0 D S 2 9 C 3A 8 D 3 0 D S 2 9 B 3A 8 D 3 0 D S 2 9 A 33 0 2 . 9 0 03 . 1 0 03 . 2 6 03 . 5 7 53 . 8 3 5 6 8 . 5 87 3 . 6 67 7 . 7 28 5 . 7 39 2 . 3 3 A 8 D 2 8 D S 2 9 C 3A 8 D 2 8 D S 2 9 B 3A 8 D 2 8 D S 2 9 A 32 8 2 . 7 0 02 . 9 0 03 . 0 6 03 . 3 7 53 . 6 3 5 6 0 . 9 66 6 . 0 47 0 . 1 07 8 . 1 18 4 . 7 1 A 8 D 3 5 D S 2 9 E 3A 8 D 3 5 D S 2 9 D 3A 8 D 2 5 D S 2 9 C 3A 8 D 2 5 D S 2 9 B 3A 8 D 2 5 D S 2 9 A 32 5 2 . 4 0 02 . 6 0 02 . 7 6 03 . 0 7 53 . 3 3 5 5 3 . 3 45 8 . 4 26 2 . 4 87 0 . 4 97 7 . 0 9 A 8 D 2 2 D S 2 9 C 3A 8 D 2 2 D S 2 9 B 3A 8 D 2 2 D S 2 9 A 32 2 2 . 1 0 02 . 3 0 02 . 4 6 02 . 7 7 53 . 0 3 5 4 8 . 2 65 3 . 3 45 7 . 4 06 5 . 4 17 2 . 0 1 A 8 D 2 0 D S 2 9 C 3A 8 D 2 0 D S 2 9 B 3A 8 D 2 0 D S 2 9 A 32 0 1 . 9 0 02 . 1 0 02 . 2 6 02 . 5 7 52 . 8 3 5 4 3 . 1 84 8 . 2 65 2 . 3 26 0 . 3 36 6 . 9 3 A 8 D 1 8 D S 2 9 E 3A 8 D 1 8 D S 2 9 D 3A 8 D 1 8 D S 2 9 C 3A 8 D 1 8 D S 2 9 B 3A 8 D 1 8 D S 2 9 A 31 8 1 . 7 0 01 . 9 0 02 . 0 6 02 . 3 7 52 . 6 3 5 3 5 . 5 64 0 . 6 44 4 . 7 05 2 . 7 15 9 . 3 1 A 8 D 1 5 D S 2 9 E 3A 8 D 1 5 D S 2 9 D 3A 8 D 1 5 D S 2 9 C 3A 8 D 1 5 D S 2 9 B 3A 8 D 1 5 D S 2 9 A 31 5 1 . 4 0 01 . 6 0 01 . 7 6 02 . 0 7 52 . 3 3 5 2 7 . 9 43 3 . 0 23 7 . 0 84 5 . 0 95 1 . 6 9 A 8 D 1 2 D S 2 9 C 3A 8 D 1 2 D S 2 9 B 3A 8 D 1 2 D S 2 9 A 31 2 1 . 1 0 01 . 3 0 01 . 4 6 01 . 7 7 52 . 0 3 5 2 2 . 8 62 7 . 9 43 2 . 0 04 0 . 0 14 6 . 6 1 A 8 D 1 0 D S 2 9 E 3A 8 D 1 0 D S 2 9 D 3A 8 D 1 0 D S 2 9 C 3A 8 D 1 0 D S 2 9 B 3A 8 D 1 0 D S 2 9 A 31 0 0 . 9 0 01 . 1 0 01 . 2 6 01 . 5 7 51 . 8 3 5 1 6 2 . 5 61 6 7 . 6 41 7 1 . 7 01 7 9 . 7 11 8 6 . 3 1 A 8 D 6 5 D S 2 9 E 2A 8 D 6 5 D S 2 9 D 2A 8 D 6 5 D S 2 9 C 2A 8 D 6 5 D S 2 9 B 2A 8 D 6 5 D S 2 9 A 26 5 6 . 4 0 06 . 6 0 06 . 7 6 07 . 0 7 57 . 3 3 5 1 4 9 . 8 61 5 4 . 9 41 5 9 . 0 01 6 7 . 0 11 7 3 . 6 1 A 8 D 6 0 D S 2 9 C 2A 8 D 6 0 D S 2 9 B 2A 8 D 6 0 D S 2 9 A 26 0 5 . 9 0 06 . 1 0 06 . 2 6 06 . 5 7 56 . 8 3 5 1 2 1 . 9 21 2 9 . 5 41 3 3 . 6 01 4 1 . 6 11 4 8 . 2 1 A 8 D 5 0 D S 2 9 E 2A 8 D 5 0 D S 2 9 D 2A 8 D 5 0 D S 2 9 C 2A 8 D 5 0 D S 2 9 B 2A 8 D 5 0 D S 2 9 A 25 0 4 . 8 0 05 . 1 0 05 . 2 6 05 . 5 7 55 . 8 3 5 1 0 9 . 2 21 1 4 . 3 01 1 8 . 3 61 2 6 . 3 71 3 2 . 9 7 A 8 D 4 4 D S 2 9 C 2A 8 D 4 4 D S 2 9 B 2A 8 D 4 4 D S 2 9 A 24 4 4 . 3 0 04 . 5 0 04 . 6 6 04 . 9 7 55 . 2 3 5 1 0 6 . 6 81 1 1 . 7 61 1 5 . 8 21 2 3 . 8 31 3 0 . 4 3 A 8 D 4 3 D S 2 9 C 2A 8 D 4 3 D S 2 9 B 2A 8 D 4 3 D S 2 9 A 24 3 4 . 2 0 04 . 4 0 04 . 5 6 04 . 8 7 55 . 1 3 5 9 9 . 0 61 0 4 . 1 41 0 8 . 2 01 1 6 . 2 11 2 2 . 8 1 A 8 D 4 0 D S 2 9 C 2A 8 D 4 0 D S 2 9 B 2A 8 D 4 0 D S 2 9 A 24 0 3 . 9 0 04 . 1 0 04 . 2 6 04 . 5 7 54 . 8 3 5 8 8 . 9 09 3 . 9 89 8 . 0 41 0 6 . 0 51 1 2 . 6 5 A 8 D 3 6 D S 2 9 C 2A 8 D 3 6 D S 2 9 B 2A 8 D 3 6 D S 2 9 A 23 6 3 . 5 0 03 . 7 0 03 . 8 6 04 . 1 7 54 . 4 3 5 8 6 . 3 69 1 . 4 49 5 . 5 01 0 3 . 5 11 1 0 . 1 1 A 8 D 3 5 D S 2 9 C 2A 8 D 3 5 D S 2 9 B 2A 8 D 3 5 D S 2 9 A 23 5 3 . 4 0 03 . 6 0 03 . 7 6 04 . 0 7 54 . 3 3 5 7 8 . 7 48 1 . 2 88 5 . 3 49 3 . 3 59 9 . 9 5 A 8 D 3 1 D S 2 9 E 2A 8 D 3 1 D S 2 9 D 2A 8 D 3 1 D S 2 9 C 2A 8 D 3 1 D S 2 9 B 2A 8 D 3 1 D S 2 9 A 23 1 3 . 1 0 03 . 2 0 03 . 3 6 03 . 6 7 53 . 9 3 5 7 3 . 6 67 8 . 7 48 2 . 8 09 0 . 8 19 7 . 4 1 A 8 D 3 0 D S 2 9 E 2A 8 D 3 0 D S 2 9 D 2A 8 D 3 0 D S 2 9 C 2A 8 D 3 0 D S 2 9 B 2A 8 D 3 0 D S 2 9 A 23 0 2 . 9 0 03 . 1 0 03 . 2 6 03 . 5 7 53 . 8 3 5 6 8 . 5 87 3 . 6 67 7 . 7 28 5 . 7 39 2 . 3 3 A 8 D 2 8 D S 2 9 C 2A 8 D 2 8 D S 2 9 B 2A 8 D 2 8 D S 2 9 A 22 8 2 . 7 0 02 . 9 0 03 . 0 6 03 . 3 7 53 . 6 3 5 6 0 . 9 66 6 . 0 47 0 . 1 07 8 . 1 18 4 . 7 1 A 8 D 2 5 D S 2 9 E 2A 8 D 2 5 D S 2 9 D 2A 8 D 2 5 D S 2 9 C 2A 8 D 2 5 D S 2 9 B 2A 8 D 2 5 D S 2 9 A 22 5 2 . 4 0 02 . 6 0 02 . 7 6 03 . 0 7 53 . 3 3 5 5 3 . 3 45 8 . 4 26 2 . 4 87 0 . 4 97 7 . 0 9 A 8 D 2 2 D S 2 9 C 2A 8 D 2 2 D S 2 9 B 2A 8 D 2 2 D S 2 9 A 22 2 2 . 1 0 02 . 3 0 02 . 4 6 02 . 7 7 53 . 0 3 5 4 8 . 2 65 3 . 3 45 7 . 4 06 5 . 4 17 2 . 0 1 A 8 D 2 0 D S 2 9 C 2A 8 D 2 0 D S 2 9 B 2A 8 D 2 0 D S 2 9 A 22 0 1 . 9 0 02 . 1 0 02 . 2 6 02 . 5 7 52 . 8 3 5 4 3 . 1 84 8 . 2 65 2 . 3 26 0 . 3 36 6 . 9 3 A 8 D 1 8 D S 2 9 E 2A 8 D 1 8 D S 2 9 D 2A 8 D 1 8 D S 2 9 C 2A 8 D 1 8 D S 2 9 B 2A 8 D 1 8 D S 2 9 A 21 8 1 . 7 0 01 . 9 0 02 . 0 6 02 . 3 7 52 . 6 3 5 3 5 . 5 64 0 . 6 44 4 . 7 05 2 . 7 15 9 . 3 1 A 8 D 1 5 D S 2 9 E 2A 8 D 1 5 D S 2 9 D 2A 8 D 1 5 D S 2 9 C 2A 8 D 1 5 D S 2 9 B 2A 8 D 1 5 D S 2 9 A 21 5 1 . 4 0 01 . 6 0 01 . 7 6 02 . 0 7 52 . 3 3 5 2 7 . 9 43 3 . 0 23 7 . 0 84 5 . 0 95 1 . 6 9 A 8 D 1 2 D S 2 9 C 2A 8 D 1 2 D S 2 9 B 2A 8 D 1 2 D S 2 9 A 21 2 1 . 1 0 01 . 3 0 01 . 4 6 01 . 7 7 52 . 0 3 5 2 2 . 8 62 7 . 9 43 2 . 0 04 0 . 0 14 6 . 6 1 A 8 D 1 0 D S 2 9 E 2A 8 D 1 0 D S 2 9 D 2A 8 D 1 0 D S 2 9 C 2A 8 D 1 0 D S 2 9 B 2A 8 D 1 0 D S 2 9 A 21 0 0 . 9 0 01 . 1 0 01 . 2 6 01 . 5 7 51 . 8 3 5 i n s e r ti n s e r t P o s i t i o n s E a r s R e a d o u t M o u n t i n g D u a l F l u s hN oC e n t e r e dC e n t e r e d D i m e n s i o n s Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information -wooRt-wo R8]5.0 [0"20/ .e linerten C]42.5["00 .1 snioOtpar EgintnuMo of. oN shluF ar EgintnuMoar EgintnuMoar EgintnuMoar EgintnuMo ABCDE 8]3.1 [5"12.ddeeahTr 404-8]3.1 [5"12.ddeeahTr 404- leo HuhTrleo HuhTr Tail Length .220" [5.59] (DIM “J”) (Continued) –– –– Tail Length .560" [14.22] (DIM “J”) for Wire Wrap Termination ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– 44 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 6 2 . 5 61 6 7 . 6 41 7 1 . 7 01 7 9 . 7 11 8 6 . 3 1 A 8 D 6 5 W W 2 9 B 3A 8 D 6 5 W W 2 9 A 36 5 6 . 4 0 06 . 6 0 06 . 7 6 07 . 0 7 57 . 3 3 5 1 4 9 . 8 61 5 4 . 9 41 5 9 . 0 01 6 7 . 0 11 7 3 . 6 1 A 8 D 6 0 W W 2 9 B 3A 8 D 6 0 W W 2 9 A 36 0 5 . 9 0 06 . 1 0 06 . 2 6 06 . 5 7 56 . 8 3 5 1 2 1 . 9 21 2 9 . 5 41 3 3 . 6 01 4 1 . 6 11 4 8 . 2 1 A 8 D 5 0 W W 2 9 B 3A 8 D 5 0 W W 2 9 A 35 0 4 . 8 0 05 . 1 0 05 . 2 6 05 . 5 7 55 . 8 3 5 1 0 9 . 2 21 1 4 . 3 01 1 8 . 3 61 2 6 . 3 71 3 2 . 9 7 A 8 D 4 4 W W 2 9 B 3A 8 D 4 4 W W 2 9 A 34 4 4 . 3 0 04 . 5 0 04 . 6 6 04 . 9 7 55 . 2 3 5 1 0 6 . 6 81 1 1 . 7 61 1 5 . 8 21 2 3 . 8 31 3 0 . 4 3 A 8 D 4 3 W W 2 9 B 3A 8 D 4 3 W W 2 9 A 34 3 4 . 2 0 04 . 4 0 04 . 5 6 04 . 8 7 55 . 1 3 5 9 9 . 0 61 0 4 . 1 41 0 8 . 2 01 1 6 . 2 11 2 2 . 8 1 A 8 D 4 0 W W 2 9 B 3A 8 D 4 0 W W 2 9 A 34 0 3 . 9 0 04 . 1 0 04 . 2 6 04 . 5 7 54 . 8 3 5 8 8 . 9 09 3 . 9 89 8 . 0 41 0 6 . 0 51 1 2 . 6 5 A 8 D 3 6 W W 2 9 B 3A 8 D 3 6 W W 2 9 A 33 6 3 . 5 0 03 . 7 0 03 . 8 6 04 . 1 7 54 . 4 3 5 8 6 . 3 69 1 . 4 49 5 . 5 01 0 3 . 5 11 1 0 . 1 1 A 8 D 3 5 W W 2 9 B 3A 8 D 3 5 W W 2 9 A 33 5 3 . 4 0 03 . 6 0 03 . 7 6 04 . 0 7 54 . 3 3 5 7 8 . 7 48 1 . 2 88 5 . 3 49 3 . 3 59 9 . 9 5 A 8 D 3 1 W W 2 9 B 3A 8 D 3 1 W W 2 9 A 33 1 3 . 1 0 03 . 2 0 03 . 3 6 03 . 6 7 53 . 9 3 5 7 3 . 6 67 8 . 7 48 2 . 8 09 0 . 8 19 7 . 4 1 A 8 D 3 0 W W 2 9 B 3A 8 D 3 0 W W 2 9 A 33 0 2 . 9 0 03 . 1 0 03 . 2 6 03 . 5 7 53 . 8 3 5 6 8 . 5 87 3 . 6 67 7 . 7 28 5 . 7 39 2 . 3 3 A 8 D 2 8 W W 2 9 B 3A 8 D 2 8 W W 2 9 A 32 8 2 . 7 0 02 . 9 0 03 . 0 6 03 . 3 7 53 . 6 3 5 6 0 . 9 66 6 . 0 47 0 . 1 07 8 . 1 18 4 . 7 1 A 8 D 2 5 W W 2 9 B 3A 8 D 2 5 W W 2 9 A 32 5 2 . 4 0 02 . 6 0 02 . 7 6 03 . 0 7 53 . 3 3 5 5 3 . 3 45 8 . 4 26 2 . 4 87 0 . 4 97 7 . 0 9 A 8 D 2 2 W W 2 9 B 3A 8 D 2 2 W W 2 9 A 32 2 2 . 1 0 02 . 3 0 02 . 4 6 02 . 7 7 53 . 0 3 5 4 8 . 2 65 3 . 3 45 7 . 4 06 5 . 4 17 2 . 0 1 A 8 D 2 0 W W 2 9 B 3A 8 D 2 0 W W 2 9 A 32 0 1 . 9 0 02 . 1 0 02 . 2 6 02 . 5 7 52 . 8 3 5 4 3 . 1 84 8 . 2 65 2 . 3 26 0 . 3 36 6 . 9 3 A 8 D 1 8 W W 2 9 B 3A 8 D 1 8 W W 2 9 A 31 8 1 . 7 0 01 . 9 0 02 . 0 6 02 . 3 7 52 . 6 3 5 3 5 . 5 64 0 . 6 44 4 . 7 05 2 . 7 15 9 . 3 1 A 8 D 1 5 W W 2 9 B 3A 8 D 1 5 W W 2 9 A 31 5 1 . 4 0 01 . 6 0 01 . 7 6 02 . 0 7 52 . 3 3 5 2 7 . 9 43 3 . 0 23 7 . 0 84 5 . 0 95 1 . 6 9 A 8 D 1 2 W W 2 9 B 3A 8 D 1 2 W W 2 9 A 31 2 1 . 1 0 01 . 3 0 01 . 4 6 01 . 7 7 52 . 0 3 5 2 2 . 8 62 7 . 9 43 2 . 0 04 0 . 0 14 6 . 6 1 A 8 D 1 0 W W 2 9 B 3A 8 D 1 0 W W 2 9 A 31 0 0 . 9 0 01 . 1 0 01 . 2 6 01 . 5 7 51 . 8 3 5 1 6 2 . 5 61 6 7 . 6 41 7 1 . 7 01 7 9 . 7 11 8 6 . 3 1 A 8 D 6 5 D S 2 9 E 3A 8 D 6 5 D S 2 9 D 3A 8 D 6 5 D S 2 9 C 3A 8 D 6 5 D S 2 9 B 3A 8 D 6 5 D S 2 9 A 36 5 6 . 4 0 06 . 6 0 06 . 7 6 07 . 0 7 57 . 3 3 5 1 4 9 . 8 61 5 4 . 9 41 5 9 . 0 01 6 7 . 0 11 7 3 . 6 1 A 8 D 6 0 D S 2 9 C 3A 8 D 6 0 D S 2 9 B 3A 8 D 6 0 D S 2 9 A 36 0 5 . 9 0 06 . 1 0 06 . 2 6 06 . 5 7 56 . 8 3 5 1 2 1 . 9 21 2 9 . 5 41 3 3 . 6 01 4 1 . 6 11 4 8 . 2 1 A 8 D 5 0 D S 2 9 E 3A 8 D 5 0 D S 2 9 D 3A 8 D 5 0 D S 2 9 C 3A 8 D 5 0 D S 2 9 B 3A 8 D 5 0 D S 2 9 A 35 0 4 . 8 0 05 . 1 0 05 . 2 6 05 . 5 7 55 . 8 3 5 1 0 9 . 2 21 1 4 . 3 01 1 8 . 3 61 2 6 . 3 71 3 2 . 9 7 A 8 D 4 4 D S 2 9 C 3A 8 D 4 4 D S 2 9 B 3A 8 D 4 4 D S 2 9 A 34 4 4 . 3 0 04 . 5 0 04 . 6 6 04 . 9 7 55 . 2 3 5 i n s e r ti n s e r t P o s i t i o n s E a r s R e a d o u t M o u n t i n g D u a l F l u s hN oC e n t e r e dC e n t e r e d D i m e n s i o n s Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors .100 x .200 [2.54 x 5.08] and .100 x .150 [2.54 x 3.81] Right Angle Dip Solder Tails Product Facts .14±.01nRecognized under the [3.56±.25] Component Program .025 Sq. Typ.of Underwriters [.64] Laboratories Inc., File No. E60980 nCertified by Canadian HStandards Association, File No. LR49571 SECTION X-X Physical Properties:ROTATED 90º Insulation Resistance— 5000 megohms minimum. .054±.071 PC BoardInsertion/Withdrawal Force[1.37±1.890] (Daughter Card)—8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair usingC .0620 [1.57] steel blade. DInsulator Body—Glass filled thermoplastic, UL rating 94V-O. High temp. plastic option is available; add suffix.100 Ref. M399 to part number.[2.54] .368 [9.35]Color—Black SECTION X-X Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: E Operation Voltage—600 VDC B (sea level) Current Rating—3 Amperes A Initial Contact Resistance— 10 milliohms Environmental Properties: Dim B Operating Temperature— .128 Dia. -55˚C to +125˚C[3.25] Dim E Temperature Cycling— .040±.003 Dia.MIL-STD-202 method 107[1.02±.08] Vibration—MIL-STD-202 method 204 Related Product Data: Polarization Key—page 57 .100Dim GDim H.100 [2.54]Daughter Card Edge Pattern—Dim KRow to Row Spacing page 57 Dim G - Centered Mounting Ear .125 [3.18] Cross Drilled Hole Only Dim K - Flush Mounting Ear .125 [3.18] Cross Drilled Hole Only .250Mounting Styles [6.35] .250 [6.35] .610 .610Ref..610[15.49] Ref. [15.49] Ref. [15.49] Centered Mounting EarFlush Mounting Ear Centered Mounting Ear .180No Mounting Ears.250.125 [3.18] Thru Hole.180.125 [3.18] Cross [4.57].125 [3.18] Cross [6.35] [4.57]Drilled HoleDrilled Hole 45 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .100" [2.54] Centerline / .200" [5.08] Row-to-Row (Dim. “H”) Spacing D i m e n s i o n s Mounting Ear Options No. of C e n t e r e dF l u s hC e n t e r e dN oC e n t e r e dF l u s h D u a l M o u n t i n gM o u n t i n g Mounting EarM o u n t i n g Mounting Ear Mounting Ear R e a d o u t A B C D E Ear Only Ear Only .125" [3.18]E a r s .125" [3.18] .125" [3.18] P o s i t i o n s G K Thru Hole Cross-Drilled Hole Cross-Drilled Hole 1 . 8 3 51 . 5 7 51 . 2 6 01 . 1 0 00 . 9 0 00 . 4 7 00 . 2 9 0 2 . 0 3 51 . 7 7 51 . 4 6 01 . 3 0 01 . 1 0 00 . 4 7 00 . 2 9 0 – 2 . 3 3 52 . 0 7 51 . 7 6 01 . 6 0 01 . 4 0 00 . 4 7 00 . 2 9 0 2 . 6 3 52 . 3 7 52 . 0 6 01 . 9 0 01 . 7 0 00 . 4 7 00 . 2 9 0 2 . 8 3 52 . 5 7 52 . 2 6 02 . 1 0 01 . 9 0 00 . 4 7 00 . 2 9 0 – 3 . 0 3 52 . 7 7 52 . 4 6 02 . 3 0 02 . 1 0 00 . 4 7 00 . 2 9 0 – 3 . 3 3 53 . 0 7 52 . 7 6 02 . 6 0 02 . 4 0 00 . 4 7 00 . 2 9 0 3 . 6 3 53 . 3 7 53 . 0 6 02 . 9 0 02 . 7 0 00 . 4 7 00 . 2 9 0 – 3 . 8 3 53 . 5 7 53 . 2 6 03 . 1 0 02 . 9 0 00 . 4 7 00 . 2 9 0 3 . 9 3 53 . 6 7 53 . 3 6 03 . 2 0 03 . 1 0 00 . 4 7 00 . 2 9 0 4 . 3 3 54 . 0 7 53 . 7 6 03 . 6 0 03 . 4 0 00 . 4 7 00 . 2 9 0 – 4 . 4 3 54 . 1 7 53 . 8 6 03 . 7 0 03 . 5 0 00 . 4 7 00 . 2 9 0 – 4 . 8 3 54 . 5 7 54 . 2 6 04 . 1 0 03 . 9 0 00 . 4 7 00 . 2 9 0 – 5 . 1 3 54 . 8 7 54 . 5 6 04 . 4 0 04 . 2 0 00 . 4 7 00 . 2 9 0 – 5 . 2 3 54 . 9 7 54 . 6 6 04 . 5 0 04 . 3 0 00 . 4 7 00 . 2 9 0 – 5 . 8 3 55 . 5 7 55 . 2 6 05 . 1 0 04 . 8 0 00 . 4 7 00 . 2 9 0 6 . 8 3 56 . 5 7 56 . 2 6 06 . 1 0 05 . 9 0 00 . 4 7 00 . 2 9 0 – 7 . 3 3 57 . 0 7 56 . 7 6 06 . 6 0 06 . 4 0 00 . 4 7 00 . 2 9 0 46 46 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 7 . 3 71 1 . 9 41 6 2 . 5 61 6 7 . 6 41 7 1 . 7 01 7 9 . 7 11 8 6 . 3 1 A 8 D 6 5 R A 2 9 FA 8 D 6 5 R A 2 9 EA 8 D 6 5 R A 2 9 CA 8 D 6 5 R A 2 9 A6 5 7 . 3 71 1 . 9 41 4 9 . 8 61 5 4 . 9 41 5 9 . 0 01 6 7 . 0 11 7 3 . 6 1 A 8 D 6 0 R A 2 9 EA 8 D 6 0 R A 2 9 CA 8 D 6 0 R A 2 9 A6 0 7 . 3 71 1 . 9 41 2 1 . 9 21 2 9 . 5 41 3 3 . 6 01 4 1 . 6 11 4 8 . 2 1 A 8 D 5 0 R A 2 9 FA 8 D 5 0 R A 2 9 EA 8 D 5 0 R A 2 9 CA 8 D 5 0 R A 2 9 A5 0 7 . 3 71 1 . 9 41 0 9 . 2 21 1 4 . 3 01 1 8 . 3 61 2 6 . 3 71 3 2 . 9 7 A 8 D 4 4 R A 2 9 EA 8 D 4 4 R A 2 9 CA 8 D 4 4 R A 2 9 A4 4 7 . 3 71 1 . 9 41 0 6 . 6 81 1 1 . 7 61 1 5 . 8 21 2 3 . 8 31 3 0 . 4 3 A 8 D 4 3 R A 2 9 EA 8 D 4 3 R A 2 9 CA 8 D 4 3 R A 2 9 A4 3 7 . 3 71 1 . 9 49 9 . 0 61 0 4 . 1 41 0 8 . 2 01 1 6 . 2 11 2 2 . 8 1 A 8 D 4 0 R A 2 9 EA 8 D 4 0 R A 2 9 CA 8 D 4 0 R A 2 9 A4 0 7 . 3 71 1 . 9 48 8 . 9 09 3 . 9 89 8 . 0 41 0 6 . 0 51 1 2 . 6 5 A 8 D 3 6 R A 2 9 EA 8 D 3 6 R A 2 9 CA 8 D 3 6 R A 2 9 A3 6 7 . 3 71 1 . 9 48 6 . 3 69 1 . 4 49 5 . 5 01 0 3 . 5 11 1 0 . 1 1 A 8 D 3 5 R A 2 9 EA 8 D 3 5 R A 2 9 CA 8 D 3 5 R A 2 9 A3 5 7 . 3 71 1 . 9 47 8 . 7 48 1 . 2 88 5 . 3 49 3 . 3 59 9 . 9 5 A 8 D 3 1 R A 2 9 FA 8 D 3 1 R A 2 9 EA 8 D 3 1 R A 2 9 CA 8 D 3 1 R A 2 9 A3 1 7 . 3 71 1 . 9 47 3 . 6 67 8 . 7 48 2 . 8 09 0 . 8 19 7 . 4 1 A 8 D 3 0 R A 2 9 FA 8 D 3 0 R A 2 9 EA 8 D 3 0 R A 2 9 CA 8 D 3 0 R A 2 9 A3 0 7 . 3 71 1 . 9 46 8 . 5 87 3 . 6 67 7 . 7 28 5 . 7 39 2 . 3 3 A 8 D 2 8 R A 2 9 EA 8 D 2 8 R A 2 9 CA 8 D 2 8 R A 2 9 A2 8 7 . 3 71 1 . 9 46 0 . 9 66 6 . 0 47 0 . 1 07 8 . 1 18 4 . 7 1 A 8 D 2 5 R A 2 9 FA 8 D 2 5 R A 2 9 EA 8 D 2 5 R A 2 9 CA 8 D 2 5 R A 2 9 A2 5 7 . 3 71 1 . 9 45 3 . 3 45 8 . 4 26 2 . 4 87 0 . 4 97 7 . 0 9 A 8 D 2 2 R A 2 9 EA 8 D 2 2 R A 2 9 CA 8 D 2 2 R A 2 9 A2 2 7 . 3 71 1 . 9 44 8 . 2 65 3 . 3 45 7 . 4 06 5 . 4 17 2 . 0 1 A 8 D 2 0 R A 2 9 EA 8 D 2 0 R A 2 9 CA 8 D 2 0 R A 2 9 A2 0 7 . 3 71 1 . 9 44 3 . 1 84 8 . 2 65 2 . 3 26 0 . 3 36 6 . 9 3 A 8 D 1 8 R A 2 9 FA 8 D 1 8 R A 2 9 EA 8 D 1 8 R A 2 9 CA 8 D 1 8 R A 2 9 A1 8 7 . 3 71 1 . 9 43 5 . 5 64 0 . 6 44 4 . 7 05 2 . 7 15 9 . 3 1 A 8 D 1 5 R A 2 9 FA 8 D 1 5 R A 2 9 EA 8 D 1 5 R A 2 9 CA 8 D 1 5 R A 2 9 A1 5 7 . 3 71 1 . 9 42 7 . 9 43 3 . 0 23 7 . 0 84 5 . 0 95 1 . 6 9 A 8 D 1 2 R A 2 9 EA 8 D 1 2 R A 2 9 CA 8 D 1 2 R A 2 9 A1 2 7 . 3 71 1 . 9 42 2 . 8 62 7 . 9 43 2 . 0 04 0 . 0 14 6 . 6 1 A 8 D 1 0 R A 2 9 FA 8 D 1 0 R A 2 9 EA 8 D 1 0 R A 2 9 CA 8 D 1 0 R A 2 9 A1 0 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .100" [2.54] Centerline / .150" [3.81] Row-to-Row (Dim. “H”) Spacing D i m e n s i o n s Mounting Ear Options No. of C e n t e r e dF l u s hC e n t e r e dN oC e n t e r e dF l u s h D u a l M o u n t i n gM o u n t i n g Mounting EarM o u n t i n g Mounting Ear Mounting Ear R e a d o u t A B C D E Ear Only Ear Only .125" [3.18]E a r s .125" [3.18] .125" [3.18] P o s i t i o n s G K Thru Hole Cross-Drilled Hole Cross-Drilled Hole 1 . 8 3 51 . 5 7 51 . 2 6 01 . 1 0 00 . 9 0 00 . 4 2 00 . 2 4 0 2 . 0 3 51 . 7 7 51 . 4 6 01 . 3 0 01 . 1 0 00 . 4 2 00 . 2 4 0 – 2 . 3 3 52 . 0 7 51 . 7 6 01 . 6 0 01 . 4 0 00 . 4 2 00 . 2 4 0 2 . 6 3 52 . 3 7 52 . 0 6 01 . 9 0 01 . 7 0 00 . 4 2 00 . 2 4 0 2 . 8 3 52 . 5 7 52 . 2 6 02 . 1 0 01 . 9 0 00 . 4 2 00 . 2 4 0 – 3 . 0 3 52 . 7 7 52 . 4 6 02 . 3 0 02 . 1 0 00 . 4 2 00 . 2 4 0 – 3 . 3 3 53 . 0 7 52 . 7 6 02 . 6 0 02 . 4 0 00 . 4 2 00 . 2 4 0 3 . 6 3 53 . 3 7 53 . 0 6 02 . 9 0 02 . 7 0 00 . 4 2 00 . 2 4 0 – 3 . 8 3 53 . 5 7 53 . 2 6 03 . 1 0 02 . 9 0 00 . 4 2 00 . 2 4 0 3 . 9 3 53 . 6 7 53 . 3 6 03 . 2 0 03 . 1 0 00 . 4 2 00 . 2 4 0 4 . 3 3 54 . 0 7 53 . 7 6 03 . 6 0 03 . 4 0 00 . 4 2 00 . 2 4 0 – 4 . 4 3 54 . 1 7 53 . 8 6 03 . 7 0 03 . 5 0 00 . 4 2 00 . 2 4 0 – 4 . 8 3 54 . 5 7 54 . 2 6 04 . 1 0 03 . 9 0 00 . 4 2 00 . 2 4 0 – 5 . 1 3 54 . 8 7 54 . 5 6 04 . 4 0 04 . 2 0 00 . 4 2 00 . 2 4 0 – 5 . 2 3 54 . 9 7 54 . 6 6 04 . 5 0 04 . 3 0 00 . 4 2 00 . 2 4 0 – 5 . 8 3 55 . 5 7 55 . 2 6 05 . 1 0 04 . 8 0 00 . 4 2 00 . 2 4 0 6 . 8 3 56 . 5 7 56 . 2 6 06 . 1 0 05 . 9 0 00 . 4 2 00 . 2 4 0 – 7 . 3 3 57 . 0 7 56 . 7 6 06 . 6 0 06 . 4 0 00 . 4 2 00 . 2 4 0 47 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 6 . 1 01 0 . 6 71 6 2 . 5 61 6 7 . 6 41 7 1 . 7 01 7 9 . 7 11 8 6 . 3 1 A 8 D 6 5 R A 2 9 F M 2 3 3A 8 D 6 5 R A 2 9 E M 2 3 3A 8 D 6 5 R A 2 9 C M 2 3 3A 8 D 6 5 R A 2 9 A M 2 3 36 5 6 . 1 01 0 . 6 71 4 9 . 8 61 5 4 . 9 41 5 9 . 0 01 6 7 . 0 11 7 3 . 6 1 A 8 D 6 0 R A 2 9 E M 2 3 3A 8 D 6 0 R A 2 9 C M 2 3 3A 8 D 6 0 R A 2 9 A M 2 3 36 0 6 . 1 01 0 . 6 71 2 1 . 9 21 2 9 . 5 41 3 3 . 6 01 4 1 . 6 11 4 8 . 2 1 A 8 D 5 0 R A 2 9 F M 2 3 3A 8 D 5 0 R A 2 9 E M 2 3 3A 8 D 5 0 R A 2 9 C M 2 3 3A 8 D 5 0 R A 2 9 A M 2 3 35 0 6 . 1 01 0 . 6 71 0 9 . 2 21 1 4 . 3 01 1 8 . 3 61 2 6 . 3 71 3 2 . 9 7 A 8 D 4 4 R A 2 9 E M 2 3 3A 8 D 4 4 R A 2 9 C M 2 3 3A 8 D 4 4 R A 2 9 A M 2 3 34 4 6 . 1 01 0 . 6 71 0 6 . 6 81 1 1 . 7 61 1 5 . 8 21 2 3 . 8 31 3 0 . 4 3 A 8 D 4 3 R A 2 9 E M 2 3 3A 8 D 4 3 R A 2 9 C M 2 3 3A 8 D 4 3 R A 2 9 A M 2 3 34 3 6 . 1 01 0 . 6 79 9 . 0 61 0 4 . 1 41 0 8 . 2 01 1 6 . 2 11 2 2 . 8 1 A 8 D 4 0 R A 2 9 E M 2 3 3A 8 D 4 0 R A 2 9 C M 2 3 3A 8 D 4 0 R A 2 9 A M 2 3 34 0 6 . 1 01 0 . 6 78 8 . 9 09 3 . 9 89 8 . 0 41 0 6 . 0 51 1 2 . 6 5 A 8 D 3 6 R A 2 9 E M 2 3 3A 8 D 3 6 R A 2 9 C M 2 3 3A 8 D 3 6 R A 2 9 A M 2 3 33 6 6 . 1 01 0 . 6 78 6 . 3 69 1 . 4 49 5 . 5 01 0 3 . 5 11 1 0 . 1 1 A 8 D 3 5 R A 2 9 E M 2 3 3A 8 D 3 5 R A 2 9 C M 2 3 3A 8 D 3 5 R A 2 9 A M 2 3 33 5 6 . 1 01 0 . 6 77 8 . 7 48 1 . 2 88 5 . 3 49 3 . 3 59 9 . 9 5 A 8 D 3 1 R A 2 9 F M 2 3 3A 8 D 3 1 R A 2 9 E M 2 3 3A 8 D 3 1 R A 2 9 C M 2 3 3A 8 D 3 1 R A 2 9 A M 2 3 33 1 6 . 1 01 0 . 6 77 3 . 6 67 8 . 7 48 2 . 8 09 0 . 8 19 7 . 4 1 A 8 D 3 0 R A 2 9 F M 2 3 3A 8 D 3 0 R A 2 9 E M 2 3 3A 8 D 3 0 R A 2 9 C M 2 3 3A 8 D 3 0 R A 2 9 A M 2 3 33 0 6 . 1 01 0 . 6 76 8 . 5 87 3 . 6 67 7 . 7 28 5 . 7 39 2 . 3 3 A 8 D 2 8 R A 2 9 E M 2 3 3A 8 D 2 8 R A 2 9 C M 2 3 3A 8 D 2 8 R A 2 9 A M 2 3 32 8 6 . 1 01 0 . 6 76 0 . 9 66 6 . 0 47 0 . 1 07 8 . 1 18 4 . 7 1 A 8 D 2 5 R A 2 9 F M 2 3 3A 8 D 2 5 R A 2 9 E M 2 3 3A 8 D 2 5 R A 2 9 C M 2 3 3A 8 D 2 5 R A 2 9 A M 2 3 32 5 6 . 1 01 0 . 6 75 3 . 3 45 8 . 4 26 2 . 4 87 0 . 4 97 7 . 0 9 A 8 D 2 2 R A 2 9 E M 2 3 3A 8 D 2 2 R A 2 9 C M 2 3 3A 8 D 2 2 R A 2 9 A M 2 3 32 2 6 . 1 01 0 . 6 74 8 . 2 65 3 . 3 45 7 . 4 06 5 . 4 17 2 . 0 1 A 8 D 2 0 R A 2 9 E M 2 3 3A 8 D 2 0 R A 2 9 C M 2 3 3A 8 D 2 0 R A 2 9 A M 2 3 32 0 6 . 1 01 0 . 6 74 3 . 1 84 8 . 2 65 2 . 3 26 0 . 3 36 6 . 9 3 A 8 D 1 8 R A 2 9 F M 2 3 3A 8 D 1 8 R A 2 9 E M 2 3 3A 8 D 1 8 R A 2 9 C M 2 3 3A 8 D 1 8 R A 2 9 A M 2 3 31 8 6 . 1 01 0 . 6 73 5 . 5 64 0 . 6 44 4 . 7 05 2 . 7 15 9 . 3 1 A 8 D 1 5 R A 2 9 F M 2 3 3A 8 D 1 5 R A 2 9 E M 2 3 3A 8 D 1 5 R A 2 9 C M 2 3 3A 8 D 1 5 R A 2 9 A M 2 3 31 5 6 . 1 01 0 . 6 72 7 . 9 43 3 . 0 23 7 . 0 84 5 . 0 95 1 . 6 9 A 8 D 1 2 R A 2 9 E M 2 3 3A 8 D 1 2 R A 2 9 C M 2 3 3A 8 D 1 2 R A 2 9 A M 2 3 31 2 6 . 1 01 0 . 6 72 2 . 8 62 7 . 9 43 2 . 0 04 0 . 0 14 6 . 6 1 A 8 D 1 0 R A 2 9 F M 2 3 3A 8 D 1 0 R A 2 9 E M 2 3 3A 8 D 1 0 R A 2 9 C M 2 3 3A 8 D 1 0 R A 2 9 A M 2 3 31 0 Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors .125 x .250 [3.18 x 6.35], Centerline Straight Dip Solder and Wire Wrap T a i l s Product Facts nRecognized under the Component Program .054±.071 PC Board [1.37±1.890] of Underwriters Laboratories Inc., .300 File No. E60980Card Depth [7.62] .610 nCertified [5.49] by Canadian Standards Association, File No. LR49571 SECTION X-X Physical Properties: J ROTATED 90º Insulation Resistance— 5000 megohms minimum. Insertion/Withdrawal Force (Daughter Card)—8 oz./2 oz. .250 [35.6 N/ 8.9 N] average contact pair [6.35] using .0620 [1.57] steel blade. .025 Sq. Insulator Body—Glass filled[.64] thermoplastic, UL rating 94V-O. High temp. plastic option is available; add C suffix M399 to part number. Color—Black D Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] .125 Ref. .368[3.18] nickel underplate with .000030 [9.35] SECTION X-X [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: Operation Voltage—600 VDC (sea level) E Current Rating—3 Amperes B Initial Contact Resistance— 10 milliohms A Environmental Properties: Operating Temperature— Dim B -55˚C to +125˚C Temperature Cycling— Dim E ±.003 MIL-STD-202 method 107 PDia..128[±.080] Dia. [3.25] Vibration—MIL-STD-202 method 204 Related Product Data: .250 Polarization Key—page 57[6.35] .125 Daughter Card Edge Pattern— [3.18] page 57 P=.040 [1.02] Dip Solder Applications P=.042 [1.07] For Wire Wrap Applications Mounting Styles .250 [6.35] .250 [6.35] .610 Ref. [15.49] Centered Mounting Ear Centered Mounting Ear Flush Mounting Ear Flush Mounting Ear .180 No Mounting Ears .125 [3.18] Thru Hole 4-40 Threaded Insert .125 [3.18] Thru Hole 4-40 Threaded Insert[4.57] 48 48 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .125" [3.18] Centerline / .250" [6.35] Row-to-Row Dip Solder Mounting Ear Options No. of D i m e n s i o n sC e n t e r e dC e n t e r e dN o Flush F l u s h D u a l Mounting Ear Mounting Ear M o u n t i n g Mounting Ear Mounting Ear R e a d o u t A B C D E .125" [3.18] 4-40 ThreadedE a r s .125" [3.18] 4-40 Threaded P o s i t i o n s Thru Holei n s e r t Thru Holei n s e r t Tail Length .160" [4.06] (DIM “J”) 1 . 5 5 51 . 2 9 51 . 0 3 50 . 8 7 50 . 6 2 5 6 2 . 0 5 51 . 7 9 51 . 5 3 51 . 3 7 51 . 1 2 5 2 . 6 8 02 . 4 2 02 . 1 6 02 . 0 0 01 . 7 5 0 3 . 0 5 52 . 7 9 52 . 5 3 52 . 3 7 52 . 1 2 5 3 . 5 5 53 . 2 9 53 . 0 3 52 . 8 7 52 . 6 2 5 –– 3 . 9 3 03 . 6 7 03 . 4 1 03 . 2 5 03 . 0 0 0 4 . 3 0 54 . 0 4 53 . 7 8 53 . 6 2 53 . 3 7 5 –– 4 . 5 5 54 . 2 9 54 . 0 3 53 . 8 7 53 . 6 2 5 5 . 1 8 04 . 9 2 04 . 6 6 04 . 5 0 04 . 2 5 0 –– 5 . 3 0 55 . 0 4 54 . 7 8 54 . 6 2 54 . 3 7 5 –– 5 . 8 0 55 . 5 4 55 . 2 8 55 . 1 2 54 . 8 7 5 –– 6 . 1 8 05 . 9 2 05 . 6 6 05 . 5 0 05 . 2 5 0 –– 7 . 0 5 56 . 7 9 56 . 5 3 56 . 3 7 56 . 1 2 5 .125" [3.18] Centerline / .250" [6.35] Row-to-Row Wire Wrap Mounting Ear Options No. of D i m e n s i o n sC e n t e r e dC e n t e r e dN o Flush F l u s h D u a l Mounting Ear Mounting Ear M o u n t i n g Mounting Ear Mounting Ear R e a d o u t A B C D E .125" [3.18] 4-40 ThreadedE a r s .125" [3.18] 4-40 Threaded P o s i t i o n s Thru Holei n s e r t Thru Holei n s e r t Tail Length .560" [14.22] (DIM “J”) 1 . 5 5 51 . 2 9 51 . 0 3 50 . 8 7 50 . 6 2 5 6––– 2 . 0 5 51 . 7 9 51 . 5 3 51 . 3 7 51 . 1 2 5 ––– 2 . 6 8 02 . 4 2 02 . 1 6 02 . 0 0 01 . 7 5 0 ––– 3 . 0 5 52 . 7 9 52 . 5 3 52 . 3 7 52 . 1 2 5 ––– 3 . 5 5 53 . 2 9 53 . 0 3 52 . 8 7 52 . 6 2 5 ––– 3 . 9 3 03 . 6 7 03 . 4 1 03 . 2 5 03 . 0 0 0 ––– 4 . 3 0 54 . 0 4 53 . 7 8 53 . 6 2 53 . 3 7 5 ––– 4 . 5 5 54 . 2 9 54 . 0 3 53 . 8 7 53 . 6 2 5 ––– 5 . 1 8 04 . 9 2 04 . 6 6 04 . 5 0 04 . 2 5 0 ––– 5 . 3 0 55 . 0 4 54 . 7 8 54 . 6 2 54 . 3 7 5 ––– 5 . 8 0 55 . 5 4 55 . 2 8 55 . 1 2 54 . 8 7 5 ––– 6 . 1 8 05 . 9 2 05 . 6 6 05 . 5 0 05 . 2 5 0 ––– 7 . 0 5 56 . 7 9 56 . 5 3 56 . 3 7 56 . 1 2 5 ––– 49 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 5 5 . 5 81 6 1 . 9 31 6 5 . 9 91 7 2 . 5 91 7 9 . 2 0 A 7 D 5 0 W W 2 9 B 3A 7 D 5 0 W W 2 9 A 35 0 1 3 3 . 3 51 3 9 . 7 01 4 3 . 7 61 5 0 . 3 71 5 6 . 9 7 A 7 D 4 3 W W 2 9 B 3A 7 D 4 3 W W 2 9 A 34 3 1 2 3 . 8 31 3 0 . 1 81 3 4 . 2 41 4 0 . 8 41 4 7 . 4 5 A 7 D 4 0 W W 2 9 B 3A 7 D 4 0 W W 2 9 A 34 0 1 1 1 . 1 31 1 7 . 4 81 2 1 . 5 41 2 8 . 1 41 3 4 . 7 5 A 7 D 3 6 W W 2 9 B 3A 7 D 3 6 W W 2 9 A 33 6 1 0 7 . 9 51 1 4 . 3 01 1 8 . 3 61 2 4 . 9 71 3 1 . 5 7 A 7 D 3 5 W W 2 9 B 3A 7 D 3 5 W W 2 9 A 33 5 9 2 . 0 89 8 . 4 31 0 2 . 4 91 0 9 . 0 91 1 5 . 7 0 A 7 D 3 0 W W 2 9 B 3A 7 D 3 0 W W 2 9 A 33 0 8 5 . 7 39 2 . 0 89 6 . 1 41 0 2 . 7 41 0 9 . 3 5 A 7 D 2 8 W W 2 9 B 3A 7 D 2 8 W W 2 9 A 32 8 7 6 . 2 08 2 . 5 58 6 . 6 19 3 . 2 29 9 . 8 2 A 7 D 2 5 W W 2 9 B 3A 7 D 2 5 W W 2 9 A 32 5 6 6 . 6 87 3 . 0 37 7 . 0 98 3 . 6 99 0 . 3 0 A 7 D 2 2 W W 2 9 B 3A 7 D 2 2 W W 2 9 A 32 2 5 3 . 9 86 0 . 3 36 4 . 3 97 0 . 9 97 7 . 6 0 A 7 D 1 8 W W 2 9 B 3A 7 D 1 8 W W 2 9 A 31 8 4 4 . 4 55 0 . 8 05 4 . 8 66 1 . 4 76 8 . 0 7 A 7 D 1 5 W W 2 9 B 3A 7 D 1 5 W W 2 9 A 31 5 2 8 . 5 83 4 . 9 33 8 . 9 94 5 . 5 95 2 . 2 0 A 7 D 1 0 W W 2 9 B 3A 7 D 1 0 W W 2 9 A 31 0 1 5 . 8 82 2 . 2 32 6 . 2 93 2 . 8 93 9 . 5 0 A 7 D 0 6 W W 2 9 B 3A 7 D 0 6 W W 2 9 A 3 1 5 5 . 5 81 6 1 . 9 31 6 5 . 9 91 7 2 . 5 91 7 9 . 2 0 A 7 D 5 0 D S 2 9 E 2A 7 D 5 0 D S 2 9 D 2A 7 D 5 0 D S 2 9 C 2A 7 D 5 0 D S 2 9 B 2A 7 D 5 0 D S 2 9 A 25 0 1 3 3 . 3 51 3 9 . 7 01 4 3 . 7 61 5 0 . 3 71 5 6 . 9 7 A 7 D 4 3 D S 2 9 C 2A 7 D 4 3 D S 2 9 B 2A 7 D 4 3 D S 2 9 A 24 3 1 2 3 . 8 31 3 0 . 1 81 3 4 . 2 41 4 0 . 8 41 4 7 . 4 5 A 7 D 4 0 D S 2 9 C 2A 7 D 4 0 D S 2 9 B 2A 7 D 4 0 D S 2 9 A 24 0 1 1 1 . 1 31 1 7 . 4 81 2 1 . 5 41 2 8 . 1 41 3 4 . 7 5 A 7 D 3 6 D S 2 9 C 2A 7 D 3 6 D S 2 9 B 2A 7 D 3 6 D S 2 9 A 23 6 1 0 7 . 9 51 1 4 . 3 01 1 8 . 3 61 2 4 . 9 71 3 1 . 5 7 A 7 D 3 5 D S 2 9 C 2A 7 D 3 5 D S 2 9 B 2A 7 D 3 5 D S 2 9 A 23 5 9 2 . 0 89 8 . 4 31 0 2 . 4 91 0 9 . 0 91 1 5 . 7 0 A 7 D 3 0 D S 2 9 E 2A 7 D 3 0 D S 2 9 D 2A 7 D 3 0 D S 2 9 C 2A 7 D 3 0 D S 2 9 B 2A 7 D 3 0 D S 2 9 A 23 0 8 5 . 7 39 2 . 0 89 6 . 1 41 0 2 . 7 41 0 9 . 3 5 A 7 D 2 8 D S 2 9 C 2A 7 D 2 8 D S 2 9 B 2A 7 D 2 8 D S 2 9 A 22 8 7 6 . 2 08 2 . 5 58 6 . 6 19 3 . 2 29 9 . 8 2 A 7 D 2 5 D S 2 9 E 2A 7 D 2 5 D S 2 9 D 2A 7 D 2 5 D S 2 9 C 2A 7 D 2 5 D S 2 9 B 2A 7 D 2 5 D S 2 9 A 22 5 6 6 . 6 87 3 . 0 37 7 . 0 98 3 . 6 99 0 . 3 0 A 7 D 2 2 D S 2 9 C 2A 7 D 2 2 D S 2 9 B 2A 7 D 2 2 D S 2 9 A 22 2 5 3 . 9 86 0 . 3 36 4 . 3 97 0 . 9 97 7 . 6 0 A 7 D 1 8 D S 2 9 E 2A 7 D 1 8 D S 2 9 D 2A 7 D 1 8 D S 2 9 C 2A 7 D 1 8 D S 2 9 B 2A 7 D 1 8 D S 2 9 A 21 8 4 4 . 4 55 0 . 8 05 4 . 8 66 1 . 4 76 8 . 0 7 A 7 D 1 5 D S 2 9 E 2A 7 D 1 5 D S 2 9 D 2A 7 D 1 5 D S 2 9 C 2A 7 D 1 5 D S 2 9 B 2A 7 D 1 5 D S 2 9 A 21 5 2 8 . 5 83 4 . 9 33 8 . 9 94 5 . 5 95 2 . 2 0 A 7 D 1 0 D S 2 9 E 2A 7 D 1 0 D S 2 9 D 2A 7 D 1 0 D S 2 9 C 2A 7 D 1 0 D S 2 9 B 2A 7 D 1 0 D S 2 9 A 21 0 1 5 . 8 82 2 . 2 32 6 . 2 93 2 . 8 93 9 . 5 0 A 7 D 0 6 D S 2 9 E 2A 7 D 0 6 D S 2 9 D 2A 7 D 0 6 D S 2 9 C 2A 7 D 0 6 D S 2 9 B 2A 7 D 0 6 D S 2 9 A 2 Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors .125 x .250 [3.18 x 6.35], .125 x .150 [3.18 x 3.81], .125 x .200 [3.18 x 5.08] Centerline, Right Angle T a i l s Product Facts nRecognized under the Component Program .14±.01 of Underwriters [3.56±.25] .025 Laboratories Inc.,Sq. Typ. [.64] File No. E60980 nCertified by Canadian Standards H Association, File No. LR49571 Physical Properties: Insulation Resistance— .054±.071 5000 megohms minimum.PC Board [1.37±1.890] Insertion/Withdrawal Force SECTION X-X ROTATED 90º (Daughter Card)—8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. C Insulator Body—Glass filled thermoplastic, UL rating 94V-O. High D temp. plastic option is available; add suffix M399 to part number. .125 Color—Black REF .368[3.18] Contacts—High strength copper alloy.[9.35] SECTION X-X Contact Plating—.000050 [0.00127] nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: E Operation Voltage—1000 VDC B (sea level) Current Rating—3 Amperes A Initial Contact Resistance— 10 milliohms Environmental Properties: Dim B Operating Temperature— .128 Dia. -55˚C to +125˚C[3.25] Dim E Temperature Cycling— .040±.003 Dia. MIL-STD-202 method 107[1.02±.08] Vibration—MIL-STD-202 method 204 Related Product Data: Polarization Key—page 57 Dim H Dim G .125 Row to Row SpacingDim K[3.18] Daughter Card Edge Pattern— page 57 Dim G - Centered Mounting Ear .125 [3.18] Cross Drilled Hole Only Dim K - Flush Mounting Ear .125 [3.18] Cross Drilled Hole Only Mounting Styles .250 .250 [6.35] [6.35] .610 .610Ref.Ref..610[15.49] [15.49] Ref. [15.49] Flush Mounting Ear Centered Mounting Ear Centered Mounting Ear .180 No Mounting Ears .250 .180 .125 [3.18] Cross .125 [3.18] Thru Hole .125 [3.18] Thru Hole[4.57][6.35] [4.57]Drilled Hole 50 50 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .125" [3.18] Centerline / .200" [5.08] and .150" [3.81] Row-to-Row (Dim. “H”) Spacing D i m e n s i o n s Mounting Ear Options No. of C e n t e r e dF l u s hC e n t e r e dN oC e n t e r e dF l u s h D u a l M o u n t i n gM o u n t i n g Mounting EarM o u n t i n g Mounting Ear Mounting Ear R e a d o u t A B C D E Ear Only Ear Only .125" [3.18]E a r s .125" [3.18] .125" [3.18] P o s i t i o n s G K Thru Hole Cross-Drilled Hole Cross-Drilled Hole .150" [3.81] Row-to-Row (Dim. “H”) Spacing 1 . 5 5 51 . 2 9 51 . 0 3 50 . 8 7 50 . 6 2 50 . 4 2 00 . 2 4 0 6 2 . 0 5 51 . 7 9 51 . 5 3 51 . 3 7 51 . 1 2 50 . 4 2 00 . 2 4 0 2 . 6 8 02 . 4 2 02 . 1 6 02 . 0 0 01 . 7 5 00 . 4 2 00 . 2 4 0 3 . 0 5 52 . 7 9 52 . 5 3 52 . 3 7 52 . 1 2 50 . 4 2 00 . 2 4 0 3 . 5 5 53 . 2 9 53 . 0 3 52 . 8 7 52 . 6 2 50 . 4 2 00 . 2 4 0 3 . 9 3 03 . 6 7 03 . 4 1 03 . 2 5 03 . 0 0 00 . 4 2 00 . 2 4 0 4 . 3 0 54 . 0 4 53 . 7 8 53 . 6 2 53 . 3 7 50 . 4 2 00 . 2 4 0 4 . 5 5 54 . 2 9 54 . 0 3 53 . 8 7 53 . 6 2 50 . 4 2 00 . 2 4 0 5 . 1 8 04 . 9 2 04 . 6 6 04 . 5 0 04 . 2 5 00 . 4 2 00 . 2 4 0 5 . 3 0 55 . 0 4 54 . 7 8 54 . 6 2 54 . 3 7 50 . 4 2 00 . 2 4 0 5 . 8 0 55 . 5 4 55 . 2 8 55 . 1 2 54 . 8 7 50 . 4 2 00 . 2 4 0 6 . 1 8 05 . 9 2 05 . 6 6 05 . 5 0 05 . 2 5 00 . 4 2 00 . 2 4 0 7 . 0 5 56 . 7 9 56 . 5 3 56 . 3 7 56 . 1 2 50 . 4 2 00 . 2 4 0 .200" [5.08] Row-to-Row (Dim. “H”) Spacing 1 . 5 5 51 . 2 9 51 . 0 3 50 . 8 7 50 . 6 2 50 . 4 7 00 . 2 9 0 6 2 . 0 5 51 . 7 9 51 . 5 3 51 . 3 7 51 . 1 2 50 . 4 7 00 . 2 9 0 2 . 6 8 02 . 4 2 02 . 1 6 02 . 0 0 01 . 7 5 00 . 4 7 00 . 2 9 0 3 . 0 5 52 . 7 9 52 . 5 3 52 . 3 7 52 . 1 2 50 . 4 7 00 . 2 9 0 3 . 5 5 53 . 2 9 53 . 0 3 52 . 8 7 52 . 6 2 50 . 4 7 00 . 2 9 0 3 . 9 3 03 . 6 7 03 . 4 1 03 . 2 5 03 . 0 0 00 . 4 7 00 . 2 9 0 4 . 3 0 54 . 0 4 53 . 7 8 53 . 6 2 53 . 3 7 50 . 4 7 00 . 2 9 0 4 . 5 5 54 . 2 9 54 . 0 3 53 . 8 7 53 . 6 2 50 . 4 7 00 . 2 9 0 5 . 1 8 04 . 9 2 04 . 6 6 04 . 5 0 04 . 2 5 00 . 4 7 00 . 2 9 0 5 . 3 0 55 . 0 4 54 . 7 8 54 . 6 2 54 . 3 7 50 . 4 7 00 . 2 9 0 5 . 8 0 55 . 5 4 55 . 2 8 55 . 1 2 54 . 8 7 50 . 4 7 00 . 2 9 0 6 . 1 8 05 . 9 2 05 . 6 6 05 . 5 0 05 . 2 5 00 . 4 7 00 . 2 9 0 7 . 0 5 56 . 7 9 56 . 5 3 56 . 3 7 56 . 1 2 50 . 4 7 00 . 2 9 0 51 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 7 . 3 71 1 . 9 41 5 5 . 5 81 6 1 . 9 31 6 5 . 9 91 7 2 . 5 91 7 9 . 2 0 A 7 D 5 0 R A 2 9 F M 2 3 2A 7 D 5 0 R A 2 9 E M 2 3 2A 7 D 5 0 R A 2 9 C M 2 3 2A 7 D 5 0 R A 2 9 A M 2 3 25 0 7 . 3 71 1 . 9 41 3 3 . 3 51 3 9 . 7 01 4 3 . 7 61 5 0 . 3 71 5 6 . 9 7 A 7 D 4 3 R A 2 9 F M 2 3 2A 7 D 4 3 R A 2 9 E M 2 3 2A 7 D 4 3 R A 2 9 C M 2 3 2A 7 D 4 3 R A 2 9 A M 2 3 24 3 7 . 3 71 1 . 9 41 2 3 . 8 31 3 0 . 1 81 3 4 . 2 41 4 0 . 8 41 4 7 . 4 5 A 7 D 4 0 R A 2 9 F M 2 3 2A 7 D 4 0 R A 2 9 E M 2 3 2A 7 D 4 0 R A 2 9 C M 2 3 2A 7 D 4 0 R A 2 9 A M 2 3 24 0 7 . 3 71 1 . 9 41 1 1 . 1 31 1 7 . 4 81 2 1 . 5 41 2 8 . 1 41 3 4 . 7 5 A 7 D 3 6 R A 2 9 F M 2 3 2A 7 D 3 6 R A 2 9 E M 2 3 2A 7 D 3 6 R A 2 9 C M 2 3 2A 7 D 3 6 R A 2 9 A M 2 3 23 6 7 . 3 71 1 . 9 41 0 7 . 9 51 1 4 . 3 01 1 8 . 3 61 2 4 . 9 71 3 1 . 5 7 A 7 D 3 5 R A 2 9 F M 2 3 2A 7 D 3 5 R A 2 9 E M 2 3 2A 7 D 3 5 R A 2 9 C M 2 3 2A 7 D 3 5 R A 2 9 A M 2 3 23 5 7 . 3 71 1 . 9 49 2 . 0 89 8 . 4 31 0 2 . 4 91 0 9 . 0 91 1 5 . 7 0 A 7 D 3 0 R A 2 9 F M 2 3 2A 7 D 3 0 R A 2 9 E M 2 3 2A 7 D 3 0 R A 2 9 C M 2 3 2A 7 D 3 0 R A 2 9 A M 2 3 23 0 7 . 3 71 1 . 9 48 5 . 7 39 2 . 0 89 6 . 1 41 0 2 . 7 41 0 9 . 3 5 A 7 D 2 8 R A 2 9 F M 2 3 2A 7 D 2 8 R A 2 9 E M 2 3 2A 7 D 2 8 R A 2 9 C M 2 3 2A 7 D 2 8 R A 2 9 A M 2 3 22 8 7 . 3 71 1 . 9 47 6 . 2 08 2 . 5 58 6 . 6 19 3 . 2 29 9 . 8 2 A 7 D 2 5 R A 2 9 F M 2 3 2A 7 D 2 5 R A 2 9 E M 2 3 2A 7 D 2 5 R A 2 9 C M 2 3 2A 7 D 2 5 R A 2 9 A M 2 3 22 5 7 . 3 71 1 . 9 46 6 . 6 87 3 . 0 37 7 . 0 98 3 . 6 99 0 . 3 0 A 7 D 2 2 R A 2 9 F M 2 3 2A 7 D 2 2 R A 2 9 E M 2 3 2A 7 D 2 2 R A 2 9 C M 2 3 2A 7 D 2 2 R A 2 9 A M 2 3 22 2 7 . 3 71 1 . 9 45 3 . 9 86 0 . 3 36 4 . 3 97 0 . 9 97 7 . 6 0 A 7 D 1 8 R A 2 9 F M 2 3 2A 7 D 1 8 R A 2 9 E M 2 3 2A 7 D 1 8 R A 2 9 C M 2 3 2A 7 D 1 8 R A 2 9 A M 2 3 21 8 7 . 3 71 1 . 9 44 4 . 4 55 0 . 8 05 4 . 8 66 1 . 4 76 8 . 0 7 A 7 D 1 5 R A 2 9 F M 2 3 2A 7 D 1 5 R A 2 9 E M 2 3 2A 7 D 1 5 R A 2 9 C M 2 3 2A 7 D 1 5 R A 2 9 A M 2 3 21 5 7 . 3 71 1 . 9 42 8 . 5 83 4 . 9 33 8 . 9 94 5 . 5 95 2 . 2 0 A 7 D 1 0 R A 2 9 F M 2 3 2A 7 D 1 0 R A 2 9 E M 2 3 2A 7 D 1 0 R A 2 9 C M 2 3 2A 7 D 1 0 R A 2 9 A M 2 3 21 0 7 . 3 71 1 . 9 41 5 . 8 82 2 . 2 32 6 . 2 93 2 . 8 93 9 . 5 0 A 7 D 0 6 R A 2 9 F M 2 3 2A 7 D 0 6 R A 2 9 E M 2 3 2A 7 D 0 6 R A 2 9 C M 2 3 2A 7 D 0 6 R A 2 9 A M 2 3 2 6 . 1 01 0 . 6 71 5 5 . 5 81 6 1 . 9 31 6 5 . 9 91 7 2 . 5 91 7 9 . 2 0 A 7 D 5 0 R A 2 9 F M 2 3 1A 7 D 5 0 R A 2 9 E M 2 3 1A 7 D 5 0 R A 2 9 C M 2 3 1A 7 D 5 0 R A 2 9 A M 2 3 15 0 6 . 1 01 0 . 6 71 3 3 . 3 51 3 9 . 7 01 4 3 . 7 61 5 0 . 3 71 5 6 . 9 7 A 7 D 4 3 R A 2 9 F M 2 3 1A 7 D 4 3 R A 2 9 E M 2 3 1A 7 D 4 3 R A 2 9 C M 2 3 1A 7 D 4 3 R A 2 9 A M 2 3 14 3 6 . 1 01 0 . 6 71 2 3 . 8 31 3 0 . 1 81 3 4 . 2 41 4 0 . 8 41 4 7 . 4 5 A 7 D 4 0 R A 2 9 F M 2 3 1A 7 D 4 0 R A 2 9 E M 2 3 1A 7 D 4 0 R A 2 9 C M 2 3 1A 7 D 4 0 R A 2 9 A M 2 3 14 0 6 . 1 01 0 . 6 71 1 1 . 1 31 1 7 . 4 81 2 1 . 5 41 2 8 . 1 41 3 4 . 7 5 A 7 D 3 6 R A 2 9 F M 2 3 1A 7 D 3 6 R A 2 9 E M 2 3 1A 7 D 3 6 R A 2 9 C M 2 3 1A 7 D 3 6 R A 2 9 A M 2 3 13 6 6 . 1 01 0 . 6 71 0 7 . 9 51 1 4 . 3 01 1 8 . 3 61 2 4 . 9 71 3 1 . 5 7 A 7 D 3 5 R A 2 9 F M 2 3 1A 7 D 3 5 R A 2 9 E M 2 3 1A 7 D 3 5 R A 2 9 C M 2 3 1A 7 D 3 5 R A 2 9 A M 2 3 13 5 6 . 1 01 0 . 6 79 2 . 0 89 8 . 4 31 0 2 . 4 91 0 9 . 0 91 1 5 . 7 0 A 7 D 3 0 R A 2 9 F M 2 3 1A 7 D 3 0 R A 2 9 E M 2 3 1A 7 D 3 0 R A 2 9 C M 2 3 1A 7 D 3 0 R A 2 9 A M 2 3 13 0 6 . 1 01 0 . 6 78 5 . 7 39 2 . 0 89 6 . 1 41 0 2 . 7 41 0 9 . 3 5 A 7 D 2 8 R A 2 9 F M 2 3 1A 7 D 2 8 R A 2 9 E M 2 3 1A 7 D 2 8 R A 2 9 C M 2 3 1A 7 D 2 8 R A 2 9 A M 2 3 12 8 6 . 1 01 0 . 6 77 6 . 2 08 2 . 5 58 6 . 6 19 3 . 2 29 9 . 8 2 A 7 D 2 5 R A 2 9 F M 2 3 1A 7 D 2 5 R A 2 9 E M 2 3 1A 7 D 2 5 R A 2 9 C M 2 3 1A 7 D 2 5 R A 2 9 A M 2 3 12 5 6 . 1 01 0 . 6 76 6 . 6 87 3 . 0 37 7 . 0 98 3 . 6 99 0 . 3 0 A 7 D 2 2 R A 2 9 F M 2 3 1A 7 D 2 2 R A 2 9 E M 2 3 1A 7 D 2 2 R A 2 9 C M 2 3 1A 7 D 2 2 R A 2 9 A M 2 3 12 2 6 . 1 01 0 . 6 75 3 . 9 86 0 . 3 36 4 . 3 97 0 . 9 97 7 . 6 0 A 7 D 1 8 R A 2 9 F M 2 3 1A 7 D 1 8 R A 2 9 E M 2 3 1A 7 D 1 8 R A 2 9 C M 2 3 1A 7 D 1 8 R A 2 9 A M 2 3 11 8 6 . 1 01 0 . 6 74 4 . 4 55 0 . 8 05 4 . 8 66 1 . 4 76 8 . 0 7 A 7 D 1 5 R A 2 9 F M 2 3 1A 7 D 1 5 R A 2 9 E M 2 3 1A 7 D 1 5 R A 2 9 C M 2 3 1A 7 D 1 5 R A 2 9 A M 2 3 11 5 6 . 1 01 0 . 6 72 8 . 5 83 4 . 9 33 8 . 9 94 5 . 5 95 2 . 2 0 A 7 D 1 0 R A 2 9 F M 2 3 1A 7 D 1 0 R A 2 9 E M 2 3 1A 7 D 1 0 R A 2 9 C M 2 3 1A 7 D 1 0 R A 2 9 A M 2 3 11 0 6 . 1 01 0 . 6 71 5 . 8 82 2 . 2 32 6 . 2 93 2 . 8 93 9 . 5 0 A 7 D 0 6 R A 2 9 F M 2 3 1A 7 D 0 6 R A 2 9 E M 2 3 1A 7 D 0 6 R A 2 9 C M 2 3 1A 7 D 0 6 R A 2 9 A M 2 3 1 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .125" [3.18] Centerline / .250" [6.35] Row-to-Row (Dim. “H”) Spacing D i m e n s i o n s Mounting Ear Options No. of C e n t e r e dF l u s hC e n t e r e dN oC e n t e r e dF l u s h D u a l M o u n t i n gM o u n t i n g Mounting EarM o u n t i n g Mounting Ear Mounting Ear R e a d o u t A B C D E Ear Only Ear Only .125" [3.18]E a r s .125" [3.18] .125" [3.18] P o s i t i o n s G K Thru Hole Cross-Drilled Hole Cross-Drilled Hole .250" [6.35] Row-to-Row (Dim. “H”) Spacing 1 . 5 5 51 . 2 9 51 . 0 3 50 . 8 7 50 . 6 2 50 . 5 2 00 . 3 4 0 6 2 . 0 5 51 . 7 9 51 . 5 3 51 . 3 7 51 . 1 2 50 . 5 2 00 . 3 4 0 2 . 6 8 02 . 4 2 02 . 1 6 02 . 0 0 01 . 7 5 00 . 5 2 00 . 3 4 0 3 . 0 5 52 . 7 9 52 . 5 3 52 . 3 7 52 . 1 2 50 . 5 2 00 . 3 4 0 3 . 5 5 53 . 2 9 53 . 0 3 52 . 8 7 52 . 6 2 50 . 5 2 00 . 3 4 0 3 . 9 3 03 . 6 7 03 . 4 1 03 . 2 5 03 . 0 0 00 . 5 2 00 . 3 4 0 4 . 3 0 54 . 0 4 53 . 7 8 53 . 6 2 53 . 3 7 50 . 5 2 00 . 3 4 0 4 . 5 5 54 . 2 9 54 . 0 3 53 . 8 7 53 . 6 2 50 . 5 2 00 . 3 4 0 5 . 1 8 04 . 9 2 04 . 6 6 04 . 5 0 04 . 2 5 00 . 5 2 00 . 3 4 0 5 . 3 0 55 . 0 4 54 . 7 8 54 . 6 2 54 . 3 7 50 . 5 2 00 . 3 4 0 5 . 8 0 55 . 5 4 55 . 2 8 55 . 1 2 54 . 8 7 50 . 5 2 00 . 3 4 0 6 . 1 8 05 . 9 2 05 . 6 6 05 . 5 0 05 . 2 5 00 . 5 2 00 . 3 4 0 7 . 0 5 56 . 7 9 56 . 5 3 56 . 3 7 56 . 1 2 50 . 5 2 00 . 3 4 0 52 52 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 8 . 6 41 3 . 2 11 5 5 . 5 81 6 1 . 9 31 6 5 . 9 91 7 2 . 5 91 7 9 . 2 0 A 7 D 5 0 R A 2 9 FA 7 D 5 0 R A 2 9 EA 7 D 5 0 R A 2 9 CA 7 D 5 0 R A 2 9 A5 0 8 . 6 41 3 . 2 11 3 3 . 3 51 3 9 . 7 01 4 3 . 7 61 5 0 . 3 71 5 6 . 9 7 A 7 D 4 3 R A 2 9 FA 7 D 4 3 R A 2 9 EA 7 D 4 3 R A 2 9 CA 7 D 4 3 R A 2 9 A4 3 8 . 6 41 3 . 2 11 2 3 . 8 31 3 0 . 1 81 3 4 . 2 41 4 0 . 8 41 4 7 . 4 5 A 7 D 4 0 R A 2 9 FA 7 D 4 0 R A 2 9 EA 7 D 4 0 R A 2 9 CA 7 D 4 0 R A 2 9 A4 0 8 . 6 41 3 . 2 11 1 1 . 1 31 1 7 . 4 81 2 1 . 5 41 2 8 . 1 41 3 4 . 7 5 A 7 D 3 6 R A 2 9 FA 7 D 3 6 R A 2 9 EA 7 D 3 6 R A 2 9 CA 7 D 3 6 R A 2 9 A3 6 8 . 6 41 3 . 2 11 0 7 . 9 51 1 4 . 3 01 1 8 . 3 61 2 4 . 9 71 3 1 . 5 7 A 7 D 3 5 R A 2 9 FA 7 D 3 5 R A 2 9 EA 7 D 3 5 R A 2 9 CA 7 D 3 5 R A 2 9 A3 5 8 . 6 41 3 . 2 19 2 . 0 89 8 . 4 31 0 2 . 4 91 0 9 . 0 91 1 5 . 7 0 A 7 D 3 0 R A 2 9 FA 7 D 3 0 R A 2 9 EA 7 D 3 0 R A 2 9 CA 7 D 3 0 R A 2 9 A3 0 8 . 6 41 3 . 2 18 5 . 7 39 2 . 0 89 6 . 1 41 0 2 . 7 41 0 9 . 3 5 A 7 D 2 8 R A 2 9 FA 7 D 2 8 R A 2 9 EA 7 D 2 8 R A 2 9 CA 7 D 2 8 R A 2 9 A2 8 8 . 6 41 3 . 2 17 6 . 2 08 2 . 5 58 6 . 6 19 3 . 2 29 9 . 8 2 A 7 D 2 5 R A 2 9 FA 7 D 2 5 R A 2 9 EA 7 D 2 5 R A 2 9 CA 7 D 2 5 R A 2 9 A2 5 8 . 6 41 3 . 2 16 6 . 6 87 3 . 0 37 7 . 0 98 3 . 6 99 0 . 3 0 A 7 D 2 2 R A 2 9 FA 7 D 2 2 R A 2 9 EA 7 D 2 2 R A 2 9 CA 7 D 2 2 R A 2 9 A2 2 8 . 6 41 3 . 2 15 3 . 9 86 0 . 3 36 4 . 3 97 0 . 9 97 7 . 6 0 A 7 D 1 8 R A 2 9 FA 7 D 1 8 R A 2 9 EA 7 D 1 8 R A 2 9 CA 7 D 1 8 R A 2 9 A1 8 8 . 6 41 3 . 2 14 4 . 4 55 0 . 8 05 4 . 8 66 1 . 4 76 8 . 0 7 A 7 D 1 5 R A 2 9 FA 7 D 1 5 R A 2 9 EA 7 D 1 5 R A 2 9 CA 7 D 1 5 R A 2 9 A1 5 8 . 6 41 3 . 2 12 8 . 5 83 4 . 9 33 8 . 9 94 5 . 5 95 2 . 2 0 A 7 D 1 0 R A 2 9 FA 7 D 1 0 R A 2 9 EA 7 D 1 0 R A 2 9 CA 7 D 1 0 R A 2 9 A1 0 8 . 6 41 3 . 2 11 5 . 8 82 2 . 2 32 6 . 2 93 2 . 8 93 9 . 5 0 A 7 D 0 6 R A 2 9 FA 7 D 0 6 R A 2 9 EA 7 D 0 6 R A 2 9 CA 7 D 0 6 R A 2 9 A Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors, .156 x .200 [3.96 x 5.08] Centerline, Straight Dip Solder and Wire Wrap T a i l s Product Facts .054±.071 PC Board [1.37±1.890 ] nRecognized under the Component Program .300 of Underwriters Card Depth [7.62] Laboratories Inc., .610 [5.49]File No. E60980 nCertified by Canadian Standards SECTION X-X Association, ROTATED 90º File No. LR49571 J Physical Properties: Insulation Resistance— .200 5000 megohms minimum. [5.08] .025 Insertion/Withdrawal ForceSq. [.64] (Daughter Card)—8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. Insulator Body—Glass filled C thermoplastic, UL rating 94V-O. High temp. plastic option is available; add D suffix M399 to part number. Color—Black .156 Ref. [3.96] Contacts—High strength copper alloy. .368 [9.35] Contact Plating—.000050 [0.00127] SECTION X-X nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: E Operation Voltage—1500 VDC (sea level) B Current Rating—3 Amperes Initial Contact Resistance— A 10 milliohms Environmental Properties: Operating Temperature— Dim B -55˚C to +125˚C Dim E Temperature Cycling— .128 P±.003[.08] Dia.MIL-STD-202 method 107Dia. [3.25] Vibration—MIL-STD-202 method 204 Related Product Data: .200 [5.08] Polarization Key—page 57 .156 [3.25]Daughter Card Edge Pattern— page 57 P=.040 [1.02] Dip Solder Applications P=.042 [1.07] For Wire Wrap Applications Mounting Styles .250 [6.35] .610 Ref. [15.49] Centered Mounting Ear Centered Mounting Ear .180 No Mounting Ears .125 [3.18] Thru Hole 4-40 Threaded Insert [4.57] 53 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .156" [3.96] Centerline / .200" [5.08] Row-to-Row Mounting Ear Options No. of D i m e n s i o n sC e n t e r e dC e n t e r e dN o D u a l Mounting Ear Mounting Ear M o u n t i n g R e a d o u t A B C D E .125" [3.18] Thru 4-40 ThreadedE a r s P o s i t i o n s H o l eI n s e r t Tail Length .160" [4.06] (DIM “J”) 1 . 7 8 41 . 5 3 41 . 2 2 11 . 1 0 00 . 7 8 0 6 2 . 4 0 82 . 1 5 81 . 8 4 51 . 7 2 41 . 4 0 4 2 . 7 2 02 . 4 7 02 . 1 5 72 . 0 3 61 . 7 1 6 3 . 1 8 82 . 9 3 82 . 6 2 52 . 5 0 42 . 1 8 4 3 . 6 5 63 . 4 0 63 . 0 9 32 . 9 7 22 . 6 5 2 4 . 2 8 04 . 0 3 03 . 7 1 73 . 5 9 63 . 2 7 6 4 . 7 4 84 . 4 9 84 . 1 8 54 . 0 6 43 . 7 4 4 5 . 2 1 64 . 9 6 64 . 6 5 34 . 5 3 24 . 2 1 2 6 . 4 6 46 . 2 1 45 . 9 0 15 . 7 8 05 . 4 6 0 7 . 5 5 67 . 3 0 66 . 9 9 36 . 8 7 26 . 5 5 2 Tail Length .220" [5.59] (DIM “J”) 1 . 7 8 41 . 5 3 41 . 2 2 11 . 1 0 00 . 7 8 0 6 2 . 4 0 82 . 1 5 81 . 8 4 51 . 7 2 41 . 4 0 4 2 . 7 2 02 . 4 7 02 . 1 5 72 . 0 3 61 . 7 1 6 3 . 1 8 82 . 9 3 82 . 6 2 52 . 5 0 42 . 1 8 4 3 . 6 5 63 . 4 0 63 . 0 9 32 . 9 7 22 . 6 5 2 4 . 2 8 04 . 0 3 03 . 7 1 73 . 5 9 63 . 2 7 6 4 . 7 4 84 . 4 9 84 . 1 8 54 . 0 6 43 . 7 4 4 5 . 2 1 64 . 9 6 64 . 6 5 34 . 5 3 24 . 2 1 2 6 . 4 6 46 . 2 1 45 . 9 0 15 . 7 8 05 . 4 6 0 7 . 5 5 67 . 3 0 66 . 9 9 36 . 8 7 26 . 5 5 2 Tail Length .560" [14.22] (DIM “J”) For Wire Wrap Termination 1 . 7 8 41 . 5 3 41 . 2 2 11 . 1 0 00 . 7 8 0 6– 2 . 4 0 82 . 1 5 81 . 8 4 51 . 7 2 41 . 4 0 4 – 2 . 7 2 02 . 4 7 02 . 1 5 72 . 0 3 61 . 7 1 6 – 3 . 1 8 82 . 9 3 82 . 6 2 52 . 5 0 42 . 1 8 4 – 3 . 6 5 63 . 4 0 63 . 0 9 32 . 9 7 22 . 6 5 2 – 4 . 2 8 04 . 0 3 03 . 7 1 73 . 5 9 63 . 2 7 6 – 4 . 7 4 84 . 4 9 84 . 1 8 54 . 0 6 43 . 7 4 4 – 5 . 2 1 64 . 9 6 64 . 6 5 34 . 5 3 24 . 2 1 2 – 6 . 4 6 46 . 2 1 45 . 9 0 15 . 7 8 05 . 4 6 0 – 7 . 5 5 67 . 3 0 66 . 9 9 36 . 8 7 26 . 5 5 2 – 54 54 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 6 6 . 4 21 7 4 . 5 51 7 7 . 6 21 8 5 . 5 71 9 1 . 9 2 A 6 D 4 3 W W 2 9 B 3A 6 D 4 3 W W 2 9 A 34 3 1 3 8 . 6 81 4 6 . 8 11 4 9 . 8 91 5 7 . 8 41 6 4 . 1 9 A 6 D 3 6 W W 2 9 B 3A 6 D 3 6 W W 2 9 A 33 6 1 0 6 . 9 81 1 5 . 1 11 1 8 . 1 91 2 6 . 1 41 3 2 . 4 9 A 6 D 2 8 W W 2 9 B 3A 6 D 2 8 W W 2 9 A 32 8 9 5 . 1 01 0 3 . 2 31 0 6 . 3 01 1 4 . 2 51 2 0 . 6 0 A 6 D 2 5 W W 2 9 B 3A 6 D 2 5 W W 2 9 A 32 5 8 3 . 2 19 1 . 3 49 4 . 4 11 0 2 . 3 61 0 8 . 7 1 A 6 D 2 2 W W 2 9 B 3A 6 D 2 2 W W 2 9 A 32 2 6 7 . 3 67 5 . 4 97 8 . 5 68 6 . 5 19 2 . 8 6 A 6 D 1 8 W W 2 9 B 3A 6 D 1 8 W W 2 9 A 31 8 5 5 . 4 76 3 . 6 06 6 . 6 87 4 . 6 38 0 . 9 8 A 6 D 1 5 W W 2 9 B 3A 6 D 1 5 W W 2 9 A 31 5 4 3 . 5 95 1 . 7 15 4 . 7 96 2 . 7 46 9 . 0 9 A 6 D 1 2 W W 2 9 B 3A 6 D 1 2 W W 2 9 A 31 2 3 5 . 6 64 3 . 7 94 6 . 8 65 4 . 8 16 1 . 1 6 A 6 D 1 0 W W 2 9 B 3A 6 D 1 0 W W 2 9 A 31 0 1 9 . 8 12 7 . 9 43 1 . 0 13 8 . 9 64 5 . 3 1 A 6 D 0 6 W W 2 9 B 3A 6 D 0 6 W W 2 9 A 3 1 6 6 . 4 21 7 4 . 5 51 7 7 . 6 21 8 5 . 5 71 9 1 . 9 2 A 6 D 4 3 D S 2 9 C 3A 6 D 4 3 D S 2 9 B 3A 6 D 4 3 D S 2 9 A 34 3 1 3 8 . 6 81 4 6 . 8 11 4 9 . 8 91 5 7 . 8 41 6 4 . 1 9 A 6 D 3 6 D S 2 9 C 3A 6 D 3 6 D S 2 9 B 3A 6 D 3 6 D S 2 9 A 33 6 1 0 6 . 9 81 1 5 . 1 11 1 8 . 1 91 2 6 . 1 41 3 2 . 4 9 A 6 D 2 8 D S 2 9 C 3A 6 D 2 8 D S 2 9 B 3A 6 D 2 8 D S 2 9 A 32 8 9 5 . 1 01 0 3 . 2 31 0 6 . 3 01 1 4 . 2 51 2 0 . 6 0 A 6 D 2 5 D S 2 9 C 3A 6 D 2 5 D S 2 9 B 3A 6 D 2 5 D S 2 9 A 32 5 8 3 . 2 19 1 . 3 49 4 . 4 11 0 2 . 3 61 0 8 . 7 1 A 6 D 2 2 D S 2 9 C 3A 6 D 2 2 D S 2 9 B 3A 6 D 2 2 D S 2 9 A 32 2 6 7 . 3 67 5 . 4 97 8 . 5 68 6 . 5 19 2 . 8 6 A 6 D 1 8 D S 2 9 C 3A 6 D 1 8 D S 2 9 B 3A 6 D 1 8 D S 2 9 A 31 8 5 5 . 4 76 3 . 6 06 6 . 6 87 4 . 6 38 0 . 9 8 A 6 D 1 5 D S 2 9 C 3A 6 D 1 5 D S 2 9 B 3A 6 D 1 5 D S 2 9 A 31 5 4 3 . 5 95 1 . 7 15 4 . 7 96 2 . 7 46 9 . 0 9 A 6 D 1 2 D S 2 9 C 3A 6 D 1 2 D S 2 9 B 3A 6 D 1 2 D S 2 9 A 31 2 3 5 . 6 64 3 . 7 94 6 . 8 65 4 . 8 16 1 . 1 6 A 6 D 1 0 D S 2 9 C 3A 6 D 1 0 D S 2 9 B 3A 6 D 1 0 D S 2 9 A 31 0 1 9 . 8 12 7 . 9 43 1 . 0 13 8 . 9 64 5 . 3 1 A 6 D 0 6 D S 2 9 C 3A 6 D 0 6 D S 2 9 B 3A 6 D 0 6 D S 2 9 A 3 1 6 6 . 4 21 7 4 . 5 51 7 7 . 6 21 8 5 . 5 71 9 1 . 9 2 A 6 D 4 3 D S 2 9 C 2A 6 D 4 3 D S 2 9 B 2A 6 D 4 3 D S 2 9 A 24 3 1 3 8 . 6 81 4 6 . 8 11 4 9 . 8 91 5 7 . 8 41 6 4 . 1 9 A 6 D 3 6 D S 2 9 C 2A 6 D 3 6 D S 2 9 B 2A 6 D 3 6 D S 2 9 A 23 6 1 0 6 . 9 81 1 5 . 1 11 1 8 . 1 91 2 6 . 1 41 3 2 . 4 9 A 6 D 2 8 D S 2 9 C 2A 6 D 2 8 D S 2 9 B 2A 6 D 2 8 D S 2 9 A 22 8 9 5 . 1 01 0 3 . 2 31 0 6 . 3 01 1 4 . 2 51 2 0 . 6 0 A 6 D 2 5 D S 2 9 C 2A 6 D 2 5 D S 2 9 B 2A 6 D 2 5 D S 2 9 A 22 5 8 3 . 2 19 1 . 3 49 4 . 4 11 0 2 . 3 61 0 8 . 7 1 A 6 D 2 2 D S 2 9 C 2A 6 D 2 2 D S 2 9 B 2A 6 D 2 2 D S 2 9 A 22 2 6 7 . 3 67 5 . 4 97 8 . 5 68 6 . 5 19 2 . 8 6 A 6 D 1 8 D S 2 9 C 2A 6 D 1 8 D S 2 9 B 2A 6 D 1 8 D S 2 9 A 21 8 5 5 . 4 76 3 . 6 06 6 . 6 87 4 . 6 38 0 . 9 8 A 6 D 1 5 D S 2 9 C 2A 6 D 1 5 D S 2 9 B 2A 6 D 1 5 D S 2 9 A 21 5 4 3 . 5 95 1 . 7 15 4 . 7 96 2 . 7 46 9 . 0 9 A 6 D 1 2 D S 2 9 C 2A 6 D 1 2 D S 2 9 B 2A 6 D 1 2 D S 2 9 A 21 2 3 5 . 6 64 3 . 7 94 6 . 8 65 4 . 8 16 1 . 1 6 A 6 D 1 0 D S 2 9 C 2A 6 D 1 0 D S 2 9 B 2A 6 D 1 0 D S 2 9 A 21 0 1 9 . 8 12 7 . 9 43 1 . 0 13 8 . 9 64 5 . 3 1 A 6 D 0 6 D S 2 9 C 2A 6 D 0 6 D S 2 9 B 2A 6 D 0 6 D S 2 9 A 2 Card Edge Connectors (Solder Type, Board-to-Board) Modified Bellows Connectors .156 x .200 [3.96 x 5.08] Centerline, .156 x .150 [3.96 x 3.81], Right Angle, Dip Solder T a i l s Product Facts nRecognized under the Component Program of Underwriters .14±.01 Laboratories Inc.,[3.56±.25] File No. E60980 .025 Sq. Typ. [.64] nCertified by Canadian Standards Association, H File No. LR49571 Physical Properties: Insulation Resistance—5000 megohms minimum. Insertion/Withdrawal Force .054±.071 PC Board(Daughter Card)—8 oz./2 oz. [1.37±1.890] [35.6 N/ 8.9 N] average contact pair SECTION X-X using .0620 [1.57] steel blade. ROTATED 90º Insulator Body—Glass filled thermoplastic, UL rating 94V-O. High temp. plastic option is available; add C suffix M399 to part number. D Color—Black Contacts—High strength copper alloy. .156 Contact Plating—.000050 [0.00127]REF [3.96] .368 nickel underplate with .000030 [9.35]SECTION X-X [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties: Operation Voltage—1500 VDC (sea level) E Current Rating—3 Amperes B Initial Contact Resistance—10 milliohms A Environmental Properties: Operating Temperature— -55˚C to +125˚C Dim B Temperature Cycling— .128 Dia. [3.25] MIL-STD-202 method 107 Dim E Vibration—MIL-STD-202 method 204 .040±.003 Dia. [1.02±.08] Related Product Data: Polarization Key—page 57 Daughter Card Edge Pattern— Dim H Dim G .156 page 57 Row to Row SpacingDim K[3.96] Dim G - Centered Mounting Ear .125 [3.18] Cross Drilled Hole Only Dim K - Flush Mounting Ear .125 [3.18] Cross Drilled Hole Only Mounting Styles .250 [6.35].250 [6.35] .610 Ref..610[15.49] .610Ref.Ref.[15.49] [15.49] Flush Mounting Ear Centered Mounting Ear .180 Centered Mounting Ear No Mounting Ears .125 [3.18] Cross .125 [3.18] Thru Hole[4.57].125 [3.18] Thru Hole Drilled Hole 55 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Ordering Information .156" [3.96] Centerline / .200" [5.08] and .150" [3.81] Row-to-Row (Dim. “H”) Spacing D i m e n s i o n s Mounting Ear Options No. of C e n t e r e dF l u s hC e n t e r e dN oC e n t e r e dF l u s h D u a l A B C D EM o u n t i n gM o u n t i n g Mounting EarM o u n t i n g Mounting Ear Mounting Ear R e a d o u t Ear Only Ear Only .125" [3.18]E a r s .125" [3.18] .125" [3.18] P o s i t i o n s G K Thru Hole Cross-Drilled Hole Cross-Drilled Hole .200" [5.08] Row-to-Row (Dim. “H”) Spacing 1 . 7 8 41 . 5 3 41 . 2 2 11 . 1 0 00 . 7 8 00 . 4 7 00 . 2 9 0 6 2 . 4 0 82 . 1 5 81 . 8 4 51 . 7 2 41 . 4 0 40 . 4 7 00 . 2 9 0 2 . 7 2 02 . 4 7 02 . 1 5 72 . 0 3 61 . 7 1 60 . 4 7 00 . 2 9 0 3 . 1 8 82 . 9 3 82 . 6 2 52 . 5 0 42 . 1 8 40 . 4 7 00 . 2 9 0 3 . 6 5 63 . 4 0 63 . 0 9 32 . 9 7 22 . 6 5 20 . 4 7 00 . 2 9 0 4 . 2 8 04 . 0 3 03 . 7 1 73 . 5 9 63 . 2 7 60 . 4 7 00 . 2 9 0 4 . 7 4 84 . 4 9 84 . 1 8 54 . 0 6 43 . 7 4 40 . 4 7 00 . 2 9 0 5 . 2 1 64 . 9 6 64 . 6 5 34 . 5 3 24 . 2 1 20 . 4 7 00 . 2 9 0 6 . 4 6 46 . 2 1 45 . 9 0 15 . 7 8 05 . 4 6 00 . 4 7 00 . 2 9 0 7 . 0 8 86 . 8 3 86 . 5 2 56 . 4 0 46 . 0 8 40 . 4 7 00 . 2 9 0 7 . 5 5 67 . 3 0 66 . 9 9 36 . 8 7 26 . 5 5 20 . 4 7 00 . 2 9 0 .150" [3.81] Row-to-Row (Dim. “H”) Spacing 1 . 7 8 41 . 5 3 41 . 2 2 11 . 1 0 00 . 7 8 00 . 4 2 00 . 2 4 0 6 2 . 4 0 82 . 1 5 81 . 8 4 51 . 7 2 41 . 4 0 40 . 4 2 00 . 2 4 0 2 . 7 2 02 . 4 7 02 . 1 5 72 . 0 3 61 . 7 1 60 . 4 2 00 . 2 4 0 3 . 1 8 82 . 9 3 82 . 6 2 52 . 5 0 42 . 1 8 40 . 4 2 00 . 2 4 0 3 . 6 5 63 . 4 0 63 . 0 9 32 . 9 7 22 . 6 5 20 . 4 2 00 . 2 4 0 4 . 2 8 04 . 0 3 03 . 7 1 73 . 5 9 63 . 2 7 60 . 4 2 00 . 2 4 0 4 . 7 4 84 . 4 9 84 . 1 8 54 . 0 6 43 . 7 4 40 . 4 2 00 . 2 4 0 5 . 2 1 64 . 9 6 64 . 6 5 34 . 5 3 24 . 2 1 20 . 4 2 00 . 2 4 0 6 . 4 6 46 . 2 1 45 . 9 0 15 . 7 8 05 . 4 6 00 . 4 2 00 . 2 4 0 7 . 0 8 86 . 8 3 86 . 5 2 56 . 4 0 46 . 0 8 40 . 4 2 00 . 2 4 0 7 . 5 5 67 . 3 0 66 . 9 9 36 . 8 7 26 . 5 5 20 . 4 2 00 . 2 4 0 56 56 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 6 . 1 01 0 . 6 71 6 6 . 4 21 7 4 . 5 51 7 7 . 6 21 8 5 . 5 71 9 1 . 9 2 A 6 D 4 3 R A 2 9 F M 2 3 3A 6 D 4 3 R A 2 9 E M 2 3 3A 6 D 4 3 R A 2 9 C M 2 3 3A 6 D 4 3 R A 2 9 A M 2 3 34 3 6 . 1 01 0 . 6 71 5 4 . 5 31 6 2 . 6 61 6 5 . 7 41 7 3 . 6 91 8 0 . 0 4 A 6 D 4 0 R A 2 9 F M 2 3 3A 6 D 4 0 R A 2 9 E M 2 3 3A 6 D 4 0 R A 2 9 C M 2 3 3A 6 D 4 0 R A 2 9 A M 2 3 34 0 6 . 1 01 0 . 6 71 3 8 . 6 81 4 6 . 8 11 4 9 . 8 91 5 7 . 8 41 6 4 . 1 9 A 6 D 3 6 R A 2 9 F M 2 3 3A 6 D 3 6 R A 2 9 E M 2 3 3A 6 D 3 6 R A 2 9 C M 2 3 3A 6 D 3 6 R A 2 9 A M 2 3 33 6 6 . 1 01 0 . 6 71 0 6 . 9 81 1 5 . 1 11 1 8 . 1 91 2 6 . 1 41 3 2 . 4 9 A 6 D 2 8 R A 2 9 F M 2 3 3A 6 D 2 8 R A 2 9 E M 2 3 3A 6 D 2 8 R A 2 9 C M 2 3 3A 6 D 2 8 R A 2 9 A M 2 3 32 8 6 . 1 01 0 . 6 79 5 . 1 01 0 3 . 2 31 0 6 . 3 01 1 4 . 2 51 2 0 . 6 0 A 6 D 2 5 R A 2 9 F M 2 3 3A 6 D 2 5 R A 2 9 E M 2 3 3A 6 D 2 5 R A 2 9 C M 2 3 3A 6 D 2 5 R A 2 9 A M 2 3 32 5 6 . 1 01 0 . 6 78 3 . 2 19 1 . 3 49 4 . 4 11 0 2 . 3 61 0 8 . 7 1 A 6 D 2 2 R A 2 9 F M 2 3 3A 6 D 2 2 R A 2 9 E M 2 3 3A 6 D 2 2 R A 2 9 C M 2 3 3A 6 D 2 2 R A 2 9 A M 2 3 32 2 6 . 1 01 0 . 6 76 7 . 3 67 5 . 4 97 8 . 5 68 6 . 5 19 2 . 8 6 A 6 D 1 8 R A 2 9 F M 2 3 3A 6 D 1 8 R A 2 9 E M 2 3 3A 6 D 1 8 R A 2 9 C M 2 3 3A 6 D 1 8 R A 2 9 A M 2 3 31 8 6 . 1 01 0 . 6 75 5 . 4 76 3 . 6 06 6 . 6 87 4 . 6 38 0 . 9 8 A 6 D 1 5 R A 2 9 F M 2 3 3A 6 D 1 5 R A 2 9 E M 2 3 3A 6 D 1 5 R A 2 9 C M 2 3 3A 6 D 1 5 R A 2 9 A M 2 3 31 5 6 . 1 01 0 . 6 74 3 . 5 95 1 . 7 15 4 . 7 96 2 . 7 46 9 . 0 9 A 6 D 1 2 R A 2 9 F M 2 3 3A 6 D 1 2 R A 2 9 E M 2 3 3A 6 D 1 2 R A 2 9 C M 2 3 3A 6 D 1 2 R A 2 9 A M 2 3 31 2 6 . 1 01 0 . 6 73 5 . 6 64 3 . 7 94 6 . 8 65 4 . 8 16 1 . 1 6 A 6 D 1 0 R A 2 9 F M 2 3 3A 6 D 1 0 R A 2 9 E M 2 3 3A 6 D 1 0 R A 2 9 C M 2 3 3A 6 D 1 0 R A 2 9 A M 2 3 31 0 6 . 1 01 0 . 6 71 9 . 8 12 7 . 9 43 1 . 0 13 8 . 9 64 5 . 3 1 A 6 D 0 6 R A 2 9 F M 2 3 3A 6 D 0 6 R A 2 9 E M 2 3 3A 6 D 0 6 R A 2 9 C M 2 3 3A 6 D 0 6 R A 2 9 A M 2 3 3 7 . 3 71 1 . 9 41 6 6 . 4 21 7 4 . 5 51 7 7 . 6 21 8 5 . 5 71 9 1 . 9 2 A 6 D 4 3 R A 2 9 FA 6 D 4 3 R A 2 9 EA 6 D 4 3 R A 2 9 CA 6 D 4 3 R A 2 9 A4 3 7 . 3 71 1 . 9 41 5 4 . 5 32 1 3 . 4 61 6 5 . 7 41 7 3 . 6 91 8 0 . 0 4 A 6 D 4 0 R A 2 9 FA 6 D 4 0 R A 2 9 EA 6 D 4 0 R A 2 9 CA 6 D 4 0 R A 2 9 A4 0 7 . 3 71 1 . 9 41 3 8 . 6 81 4 6 . 8 11 4 9 . 8 91 5 7 . 8 41 6 4 . 1 9 A 6 D 3 6 R A 2 9 FA 6 D 3 6 R A 2 9 EA 6 D 3 6 R A 2 9 CA 6 D 3 6 R A 2 9 A3 6 7 . 3 71 1 . 9 41 0 6 . 9 81 1 5 . 1 11 1 8 . 1 91 2 6 . 1 41 3 2 . 4 9 A 6 D 2 8 R A 2 9 FA 6 D 2 8 R A 2 9 EA 6 D 2 8 R A 2 9 CA 6 D 2 8 R A 2 9 A2 8 7 . 3 71 1 . 9 49 5 . 1 01 0 3 . 2 31 0 6 . 3 01 1 4 . 2 51 2 0 . 6 0 A 6 D 2 5 R A 2 9 FA 6 D 2 5 R A 2 9 EA 6 D 2 5 R A 2 9 CA 6 D 2 5 R A 2 9 A2 5 7 . 3 71 1 . 9 48 3 . 2 19 1 . 3 49 4 . 4 11 0 2 . 3 61 0 8 . 7 1 A 6 D 2 2 R A 2 9 FA 6 D 2 2 R A 2 9 EA 6 D 2 2 R A 2 9 CA 6 D 2 2 R A 2 9 A2 2 7 . 3 71 1 . 9 46 7 . 3 67 5 . 4 97 8 . 5 68 6 . 5 19 2 . 8 6 A 6 D 1 8 R A 2 9 FA 6 D 1 8 R A 2 9 EA 6 D 1 8 R A 2 9 CA 6 D 1 8 R A 2 9 A1 8 7 . 3 71 1 . 9 45 5 . 4 76 3 . 6 06 6 . 6 87 4 . 6 38 0 . 9 8 A 6 D 1 5 R A 2 9 FA 6 D 1 5 R A 2 9 EA 6 D 1 5 R A 2 9 CA 6 D 1 5 R A 2 9 A1 5 7 . 3 71 1 . 9 44 3 . 5 95 1 . 7 15 4 . 7 96 2 . 7 46 9 . 0 9 A 6 D 1 2 R A 2 9 FA 6 D 1 2 R A 2 9 EA 6 D 1 2 R A 2 9 CA 6 D 1 2 R A 2 9 A1 2 7 . 3 71 1 . 9 43 5 . 6 64 3 . 7 94 6 . 8 65 4 . 8 16 1 . 1 6 A 6 D 1 0 R A 2 9 FA 6 D 1 0 R A 2 9 EA 6 D 1 0 R A 2 9 CA 6 D 1 0 R A 2 9 A1 0 7 . 3 71 1 . 9 41 9 . 8 12 7 . 9 43 1 . 0 13 8 . 9 64 5 . 3 1 A 6 D 0 6 R A 2 9 FA 6 D 0 6 R A 2 9 EA 6 D 0 6 R A 2 9 CA 6 D 0 6 R A 2 9 A Card Edge Connectors (Solder Type, Board-to-Board) Card Edge Polarization Keys Description/Application Tyco Electronics can pro- vide polarization keys in the basic configuration shown on this page. Our Modified Break Off Point Bellows and Cantilever Beam Series Card Edge Connectors use these keys. The part number and the 45° connector series for which it was designed are listed in the table below. .24 [6.10] .033 .19 [.84] [4.83] Ordering Information Acquired Part Used on Connector Shown on Number Series Pages 98014-01Modified Bellows41-56 98014-01Cantilever Beam28-40 Card Edge Connectors Recommended Daughter Card Edge Pattern Per MIL-C-21097E .062[1.57] Board Thickness 30° Slot Depth Min. Contact Spacing Dim. B .015 Dim. A[.38] (Per Applicable Catalog Page) See Note 3 Daughter Card Contact Spacing Dim A Dim B Non-Accum. ±.005 (.13) .100 [2.54].093 [2.36].052 [1.32] .125 [3.18].093 [2.36].052 [1.32] .156 [3.96].105* [2.67].094 [2.39] * Except MIL-C-21097E 8–4 which is .070 [1.78] NOTES: 1. Dimensions are in inches 2. Unless otherwise specified, tolerance is ±.005 [0.13 mm] for three place decimals. 3. Number of contact fingers shall be the same as the corresponding printed wiring connector. 57 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors Product Facts nLow profile housing is .460 [11.68] deep n6 through 43 dual positions on .156 [3.96] centerline; 6 though 50 dual positions on .125 [3.18] centerline nSolder eyelet for wire-to- board or solder post for mother-daughter board application nSelective gold plating of contact area for high performance at low cost nAlternate platings are available on request nContacts bifurcated for redundancy nTin plate for high solder- ability of solder eyelets and posts nAccepts .055-.070 [1.40- 1.78] thick printed circuit boards nHousings available with or without mounting ears nIntercontact keying available nUL 94V-0 rated, glass-filled For printed circuit board with either solder posts for provisions, probe slots and polyester housings packaging, AMP Low Profile mother-daughter board identification of number one nVariety of solder post Edge Connectors provide applications or solder eye- position. lengths high performance, low cost let contacts for wire-to- The precision formed con- connections on .125 [3.18] board use.n5 ampere current rating tacts made of phosphor and .156 [3.96] centerline per contact* Low Profile Edge Connec- bronze are gold plated on spacings. .100 [2.54] cen- tors feature clear slot entry the contact mating surfacenRecognized under the terline connectors can be and accept .055-.070 only. This selective plating Component Program of made available, consult [1.40-1.78] thick double- provides high reliability Underwriters Tyco Electronics. sided printed circuit boards. while maintaining low cost. Laboratories Inc. Mounted connector hous- Solder posts are available Solder eyelets and posts File No. E28476 ings extend only .460 with .150 [3.18] and .180 are tin plated for excellent [11.68] from the mother [4.57] long tails on .140 solderability. The contact is board to allow efficient use [3.56] or .200 [5.08] row- bifurcated for redundancy. of available space. to-row spacing. Shorting contacts are available. These low profile connec- Impact-resistant thermo- tors are available in 6 plastic housing, UL rated All connector configurations through 43 dual position 94V-0, have molded-in are furnished preloaded. sizes on .156 [3.96] center- cavity identification and are Selectively loaded connec- line spacing and with 6 available with or without tors can be made available through 50 dual positions mounting ears. Additional for added economy. on .125 [3.18] centers. features of the housings Connectors are supplied include intercontact keying *Consult Tyco Electronicsengi- neering when paralleling con- tacts for power applications. 58 58 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors, .125 [3.18] Centerline Material and Finish: .128 Dia.PCBoard Thickness—[3.25] Housing—Green, glass-filled .055-.070[1.40-1.78]2 (Plcs.) polyester Contacts—Phosphor bronze, duplex plated .000030 [0.00076] gold in con- tact area; .000100 [0.00254] bright tin .300 C [7.62]on posts, with entire contact under- plated .000030 [0.00076] nickel .125 .150[3.18].125 Typ.[3.81][3.18] Related Product Data: A Keying Plug—page 63 B PC Board Hole Layouts—See below D PC Board Edge Pattern—page 63 .460 [11.68] Technical Documents: (pages 186, 187): .250 Product Specification[6.35] 108-9044 Instruction Sheet 408-7772 .125 Typ. [3.18] #1 Cavity Identification Molded Characters (Upper and Lower Case Letters Omitting Letters G, I, O &Q) 1 2 3 4 5 6 A B C D E F E . 1 2 5 . 1 2 5. 1 2 5 [3.18] .295[3.18] [3.18] .295 .295 [7.49][7.49][7.49] .165 .165 .165 [4.19][4.19][4.19] Post LengthPost Length .280(See Chart)(See Chart)Ref. [7.11] .200 .140 [5.08][3.56] .235 Ref. [5.97] Flow Solder Post Flow Solder Post Solder Eyelet Contact .200[5.08] Row-to-Row Spacing.140[3.56] Row-to-Row Spacing.235[5.97] Row-to-Row Spacing .200 .140 .128 .052 .128 .052Dia.Dia.[5.08]Dia.Dia.[3.56][3.25] [1.32] [3.25] [1.32] .335 .335 [8.51][8.51].125 .125 .070Typ..100Typ.[3.18][3.18][1.78][2.54] B B Recommended Recommended PC Board Hole Layout PC Board Hole Layout 59 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 R e f .R e f . R e f . Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors, .125 [3.18] Centerline (Continued) Flow Solder Post No. of With Without Dimensions Post Dual Mounting Mounting .200 [5.08] Row-to-Row Length* A B C D E Positions Ears Ears Spacing .875 .370 1.035 6——.150—2-530671-1 22.239.4026.29 .150—2-530671-21.375 1.795 .370 1.535 2.055 10 34.9345.599.4038.9952.20.1802-530663-2— 2.000 2.420 .370 2.160 2.680 15.150—2-530671-3 50.8061.479.4054.8668.07 2.375 2.795 .370 2.535 3.055 18.1802-530663-42-530671-4 60.3370.999.4064.3977.60 2.875 3.295 .370 3.035 3.555 22.1502-530662-52-530671-5 73.0383.699.4077.0990.30 3.125 .370 3.285 24——.150—3-530671-3 79.389.4083.44 3.625 4.045 .370 3.785 4.305 28.1502-530662-62-530671-6 92.08102.749.4096.14109.35 3.875 .370 4.035 30——.150—2-530671-7 98.439.40102.49 4.625 5.045 .370 4.785 5.305 .150—2-530671-9 36 117.48128.149.40121.54134.75.180—2-530672-9 5.125 5.545 .437 5.285 5.805 40.150—3-530671-0 130.18140.8411.10134.24147.45 6.375 6.795 .437 6.535 7.055 50.1503-530662-2— 161.93172.5911.10165.99179.20 Flow Solder Post No. of With Without Dimensions Post Dual Mounting Mounting .140 [3.56] Row-to-Row Length* A B C D E Positions Ears Ears Spacing 2.000 .370 2.160 15——.150—2-530673-3 50.809.4054.86 3.625 .370 3.785 .150—2-530673-6 28—— 92.089.4096.14.1802-530674-6— 6.375 6.795 .437 6.535 7.055 50.1803-530659-2— 161.93172.5911.10165.99179.20 Solder Eyelet Contact No. of With Dimensions Dual Mounting .235 [5.97] Row-to-Row A B C D E Positions Ears Spacing 2.000 2.420 .370 2.160 2.680 152-530664-3 50.8061.479.4054.8668.07 2.875 3.295 .370 3.035 3.555 222-530664-5 73.0283.699.4077.0890.29 3.625 4.045 .370 3.785 4.305 282-530664-6 92.08102.749.4096.14109.35 5.125 5.545 .437 5.285 5.805 403-530664-0 130.17140.8411.10134.23147.44 6.375 6.795 .437 6.535 7.055 503-530664-2 161.92172.5911.10165.98179.19 *Metric equivalents for post length are .150= [3.81]; .180= [4.57]. Note:Other connector sizes can be made available, consult Tyco Electronics. 60 60 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors, .156 [3.96] Centerline Material and Finish: Mounting Ear with Insert .128 Housing—Green, glass-filled PCBoard Thickness—Dia. [3.25] polyester .055-.070[1.40-1.78] (2 Plcs.) Contacts—Phosphor bronze, duplex plated .000030 [0.00076] gold in con- tact area; .000100 [0.00254] bright tin on posts, with entire contact under- .300 C [7.62]plated .000030 [0.00076] nickel Insert—Brass .160 .156[4.06].150Threaded InsertsTyp. [3.96] [3.81]Related Product Data:4-40 NC-2B A (2 per connector) Keying Plug—page 63 B PC Board Hole Layouts—See below D PC Board Edge Pattern—page 63 .460 [11.68]Technical Documents: (pages 186, 187): .250 [6.35]Product Specification 108-9044 Instruction Sheet 408-7772 .156 Typ. [3.96] #1 Cavity Identification Molded Characters (Upper and Lower Case Letters Omitting Letters G, I, O &Q) 2 3 1 4 5 6 A B C D E F E .125 .125 .125 Ref.Ref.Ref..295 .295[3.18] .295[3.18] [3.18] [7.49][7.49][7.49] .165 .165 .165 [4.19][4.19][4.19] Post LengthPost Length .280(See Chart)(See Chart)Ref. [7.11] .200 .140 [5.08][3.56] .235 Ref. [5.97] Flow Solder Post Flow Solder Post Solder Eyelet Contact .200[5.08] Row-to-Row Spacing.140[3.56] Row-to-Row Spacing.235[5.97] Row-to-Row Spacing .200 .140 .128 .052 .128 .052 Dia.Dia.Dia.Dia.[5.08][3.56][3.25] [1.32] [3.25] [1.32] .378 .378 [9.59][9.59].156 .156 .070 Typ..100Typ.[3.96][3.96][1.78] [2.54] B B Recommended Recommended PC Board Hole Layout PC Board Hole Layout 61 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors, .156 [3.96] Centerline (Continued) Flow Solder Post No. of With With Without Dimensions Post Dual Mounting Mounting Ears Mounting .200 [5.08] Row-to-Row Length* A B C D E Positions Ears and Inserts Ears Spacing 1.100 1.535 .370 1.240 1.7852-530655-12-530677-1— 6.150 1127.9438.999.4031.5045.342-530689-1—2-530666-1 .1502-530655-2—2-530666-21.724 2.159 .370 1.864 2.409 10 43.7954.849.4047.3561.19.1802-530656-2—— 2.036 2.471 .370 2.176 2.721 12.1502-530655-3—2-530666-3 51.7162.769.4055.2769.11 2-530655-4—2-530666-42.504 2.939 .370 2.644 3.189 15.150 63.6074.659.4067.1681.00112-530689-4—— .1502-530655-5—2-530666-52.972 3.407 .370 3.112 3.657 18 75.4986.549.4079.0492.89.180——2-530667-5 2-530655-6—2-530666-6 .150 3.596 4.031 .370 3.736 4.281 1111222-530689-6—2-531433-4 91.34102.399.4094.89108.74 .1802-530656-62-530678-62-530667-6 11.1502-530655-8—2-531433-14.064 4.499 .370 4.204 4.749 25103.23114.279.40106.78120.62.1802-530656-8—2-530666-8 .1503-530655-2—3-530666-24.532 4.967 .370 4.672 5.217 28115.11126.169.40118.67132.51.1803-530656-2—— 2-530655-9—2-530666-9 .150 4.844 5.279 .437 4.984 5.529 11302-530689-9—— 123.04134.0911.10126.59140.44 .180——2-530667-9 11.1503-530655-0—2-531433-25.780 6.215 .437 5.920 6.465 36 146.18157.8611.10150.37164.2111.1803-530689-0—2-530667-0 .1503-530655-33-530677-33-530666-36.872 7.307 .437 7.012 7.557 43 174.55185.6011.10178.10191.95.1803-530656-3—3-530667-3 Flow Solder Post Flow Solder Post Solder Eyelet Contact No. of Dimensions Post .140 [3.56] Row-to-Row With Without With Without Dual Length* Mounting Mounting Mounting Mounting A B C D E Spacing Positions Ears Ears Ears Ears and 1.100 1.535 .370 1.240 1.785 6.150——2-530654-1— 27.9438.999.4031.5045.34 Solder Eyelet Contact 1.724 2.159 .370 1.864 2.40910.1502-530657-2—2-530654-2—.235 [5.97] Row-to-Row 43.7954.849.4047.3561.19 Spacing .1502-530657-4—2-530654-42-530667-42.504 2.939 .370 2.644 3.189 15 63.6074.659.4067.1681.00.180—2-530669-4—— 2.972 3.407 .370 3.112 3.657 18.150—2-530668-52-530654-5— 75.4986.549.4079.0492.89 3.596 4.031 .370 3.736 4.281 22.1502-530657-62-530668-62-530654-6— 91.34102.399.4094.89108.74 3.908 4.343 .370 4.048 4.593 24.150——2-530654-7— 99.26110.319.40102.81116.66 4.532 4.967 .370 4.672 5.217 28.1503-530657-23-530668-23-530654-2— 115.11126.169.40118.67132.51 4.844 5.279 .437 4.984 5.529 30———2-530654-9— 123.04134.0911.10126.59140.44 .150——3-530654-0—5.780 6.215 .437 5.920 6.465 36146.81155.5811.10150.36164.21.180—3-530669-0—— 6.872 7.307 .437 7.012 7.55743.1503-530657-3—3-530654-3— 174.55185.6011.10178.10191.95 *Metric equivalents for post length are .150= [3.81]; .180= [4.57]. 1For .040[1.02] diameter hole. Note:Other connector sizes can be made available, consult Tyco Electronics. 62 62 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Low Profile Connectors (Continued) Keying Plug Intercontact Key Material: Glass-filled nylon Part No. 650025-2 Recommended PC Board .125 [3.18] Centerline Boards Edge Patterns Intercontact KeySlot .300 .050Min. [7.52] [1.27] .400 [10.16] .005 ± .125 .078 .000 0.13[3.18].175±[1.98]0.00Min. .125[4.45] [3.18]Recommended Gold Area .156 [3.96] Centerline Boards Intercontact KeySlot .300 Min..050[7.52] [1.27] .400 [10.16] .005 ± .160 .094 .000 .1750.13[4.06]±Min.[2.39]0.00.156[4.45] [3.96]Recommended Gold Area 63 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors Product Facts nWide variety of sizes avail- able from 3 dual positions and up—no initial tooling investment required for new versions nConnectors can be selec- tively loaded with contacts in custom patterns nConnectors tooled on all standard centerlines— .100 [2.54], .125 [3.18], .150 [3.81], .156 [3.96], and .200 [5.08] Note: .200 [5.08] centerline capabili- ties provided by loading every-other dual position of .100 [2.54] centerline housings. nClosed card entry protects contacts and daughter board pads nAdapts to a wide range of mother board thicknesses to .104 [2.64] maximum nPhosphor bronze contacts selectively plated for top performance and maximum economy nProtective channel helps prevent overstress of The AMP Twin Leaf termination resistance, long Card guides or end caps Connector is a highly life and moderate contact contacts make alignment of daughter reliable, low-cost mother/ separation force meet board pads with Twin Leaf nDaughter board keying daughter board connector industry requirements for Connector contacts quick available in intercontact or designed for solid-state reliability. Connectors are and easy. on-contact styles circuitry. The one-piece, tooled in sizes from 3 multi-contact connector through 80 dual-contactnRecognized under the requires no front-end tooling. positions with contacts on Component Program Performance Specifications .100 [2.54], .125 [3.18], of Underwriters This versatile connector for .150 [3.81], .156 [3.96] double-sided printed circuit Contact Rating*: Laboratories Inc., or .200 [5.08] centers. 3 amperes continuous boards uses preloaded File No. E28476 Other sizes and custom- contacts and selective plat- Temperature Rating: loaded contact patterns ing to give lowest applied –55°C to +105°C are available on request. cost. Critical contact areas Insulation Resistance: are gold-over-nickel plated The connector housing, 5,000 megohms to provide positive electrical made of glass-filled poly- Dielectric Withstanding Voltage: connection between con- ester with a UL 94V-0 tacts and daughter board rating, features a standoff Test Voltage (AC, RMS) Altitude pads. Contact posts are tin which facilitates the use of a Contact Spacing plated for efficient dip probe for electrical continuity .100 [2.54] .150 [3.81] soldering to mother boards checks without risk of dam- Sea Level 1,000 1,500 up to .104 [2.64] thick. age to the contacts. A 50,000 ft 400 600 closed card-entry design of 15 240 m The Twin Leaf Connector the housing protects the 70,000 ft delivers high reliability 280 400 21 336 m contacts and daughter because the contacts board pads. Housings possess superior tolerance Termination Resistance: accept daughter boards of environmental stresses 10 milliohms, max. ranging from .055 [1.40] to including shock, vibration Durability: Tested to 100 cycles .070 [1.78] in thickness. and variations of tempera- (engage/withdraw) ture and humidity. Other Intercontact and on-contact *Consult Tyco Electronics engi- Contact Plating: .000015 [0.00038] characteristics such as high keys are available for neering when paralleling con- selective gold plating on contact area; insulation resistance, low tacts for power applications. polarization of the housings. bright tin on solder tine 64 64 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors Without End Caps .100 [2.54], .125 [3.18], .150 [3.81] and .400 Fit for [10.16].156 [3.96] Centerlines, .055-.070 [1.4-1.78] With Solder Posts PCBoard .225Card Slot [5.72]Material and Finish:Depth .400[10.16] .610 Housing—Glass-filled polyester, Max. [15.49] 94V-0 rated Contacts—Phosphor bronze, plated .000015 [0.00038] gold in contact area; tin on posts, with entire contact under- plated .000030 [0.00076] nickel, except where noted .010 x .024 A .135* .170*[0.25 x 0.61].200or [3.43] [4.32]Post for .035[0.89][5.08]B ADia. Hole Related Product Data: D Performance Specifications— page 64 Card Guides—pages 70, 71 Keying Plugs—page 72 *Post length:.135[3.43] for .150[3.81] and.156 [3.96] centerlines, except where noted; PC Board Hole Layouts—page 71 .170[4.32] for .100[2.54] and.125 [3.18] centerlines, except where noted. Technical Documents: (pages 186, 187): Product Specification 108-9027 Instruction Sheets 408-7479, 408-7498, 408-7506 65 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors Without End Caps A = .100 [2.54] A = .125 [3.18] A = .150 [3.81] A = .156 [3.96] No. of Centerline Spacing Centerline Spacing Centerline Spacing Centerline Spacing Dual Part Part Part Part Positions B D B D B D B D Numbers Numbers Numbers Numbers .300 .6001,32——————1-583694-1——— 7.6215.24 .200 .400 .300 .600 .312 .624 1,31,33583485-6———1-645155-14-583486-8 5.0810.167.6215.247.9215.85 .450 .750 4——————583407-5——— 11.4319.05 .400 .600 .600 .900 5583485-7———583407-6——— 10.1615.2415.2422.86 1.050 1.350 8——————583407-9——— 26.6734.29 1.000 1.250 9———583533-7—————— 25.4031.75 .900 1.100 1.400 1.720 101-583485-2——————4-583486-1 22.8627.9435.5643.69 1.500 1.800 11——————1-583407-2——— 38.1045.72 1.300 1.500 141-583485-6————————— 33.0238.10 2.100 2.400 15——————1-583407-5——— 53.3460.96 2.125 2.375 2.652 2.964 18———1-583533-6———3-583486-3 53.9760.3267.3675.28 2.850 3.1502-583407-0 20—————————372.3980.01530292-9 2.625 2.875 22———2-583533-0—————— 66.6773.02 4.050 4.350 4.212 4.524 28——————583407-12-583486-3 102.87110.49106.99114.91 3.625 3.875 4.524 4.836230———531534-2———2-583486-1 92.0898.43114.91122.83 4.500 4.800 331——————530292-3——— 53.3460.96 4.992 5.304 33—————————1-583486-8 126.80134.72 5.460 5.772 36—————————1-583486-5 138.68146.61 4.875 5.125 5.850 6.150 6.084 6.396 40———3-583533-83-583407-81-583486-1 123.83130.18148.59156.21154.53162.46 6.552 6.864 43—————————583486-8 166.42174.35 4.900 5.100 6.130 6.380 7.350 7.650 7.640 7.960150583485-35-583533-04-583407-8583486-1 124.46129.54155.70162.05186.69194.31194.06202.18 8.580 8.892 56—————————5-583486-0 217.93225.86 6.400 6.600 655-583485-6————————— 162.56167.64 7.900 8.100 805-583485-5————————— 200.66205.74 1Contacts are plated .000030 [0.00076] gold in contact area, tin on posts, with entire contact underplated .000030 [0.00076] nickel. 2Post length .135 [3.43] 3Post length .170 [4.32] Note:Other connector sizes can be made available, consult Tyco Electronics. 66 66 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors With End Caps .100 [2.54], .125 [3.18], .150 [3.81] and .400 Fit for [10.16] .055-.070 .156 [3.96] Centerlines, F[1.4-1.78] With Solder Posts PCBoard .225 Material and Finish:Card Slot [5.72]Depth Housing—Glass-filled polyester, .400[10.16] Max..610 94V-0 rated [15.49] Contacts—Phosphor bronze, plated .000015 [0.00038] gold in contact area; tin on posts, with entire contact under- plated .000030 [0.00076] nickel .135* .170* .010 x .024or [3.43] [4.32][0.25 x 0.61] Related Product Data: .062 Post for .035 [0.89]Accepts #2A[1.58].200Dia. HoleSelf-tappingPerformance Specifications— B E**[5.08] Screw page 64 G Keying Plugs—page 72 PC Board Hole Layouts—page 71 Technical Documents:**Post length:.135[3.43] for .150[3.81] and.156 [3.96] centerlines; .170[4.32] for .100[2.54] and.125 [3.18] centerlines.(pages 186, 187): **See page 27 for dimensions. Product Specification 108-9027 Instruction Sheets 408-7479, 408-7498, 408-7506 67 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors With End Caps A = .100 [2.54] Centerline Spacing A = .125 [3.18] Centerline Spacing A = .150 [3.81] Centerline Spacing A = .156 [3.96] Centerline Spacing No. of Dual Part Part Part Part B F G B F G B F G B F G Pos. Numbers Numbers Numbers Numbers .200 .400 .734 31-583715-1———————————— 5.0310.1618.64 .400 .600 .934 51-583715-3———————————— 10.1615.2423.72 .500 .700 1.034 .625 .875 1.259 .780 1.092 1.538 61-583715-41-583679-5————1-583660-6 12.7017.7826.2615.8822.2331.9619.8127.7439.07 .600 .800 1.134 71-583715-5———————————— 15.2420.3228.80 .800 1.000 1.334 91-583715-7———————————— 20.3225.4033.88 .900 1.100 1.434 1.404 1.716 2.162 101-583715-8————————1-583660-0 22.8627.9436.4235.6643.5954.91 1.100 1.300 1.634 1.716 2.028 2.474 121-583715-0————————1-583660-2 27.9433.0241.5043.5851.5162.84 1.200 1.400 1.734 131-583715-1———————————— 30.4835.5644.04 1.950 2.250 2.684 2.028 2.340 2.786 14————————1-583692-31-583660-4 49.5357.1568.1751.5159.4470.76 1.400 1.600 1.934 2.100 2.400 2.834 2.184 2.496 2.942 151-583715-3————1-583692-41-583660-2 35.5640.6449.1253.3460.9671.9855.4763.4074.73 1.600 1.800 2.134 2.000 2.250 2.634 171-583715-51-583679-6———————— 40.6445.7254.2050.8057.1566.90 1.700 1.900 2.234 2.125 2.375 2.759 2.652 2.964 3.410 181-583715-61-583679-7————1-583660-7 43.1848.2656.7453.9860.3370.0867.3675.2886.61 1.900 2.100 2.434 2.375 2.625 3.009 201-583715-81-583679-9———————— 48.2653.3461.8260.3366.6876.43 3.276 3.588 4.034 22————————————2-583660-1 83.2191.14102.46 2.400 2.600 2.934 3.000 3.250 3.634 3.600 3.900 4.334 3.744 4.065 4.502 252-583715-32-583679-42-583692-42-583660-4 60.9666.0474.5276.2082.5592.3091.4499.06110.0895.10103.02114.35 2.500 2.700 3.034 262-583715-4———————————— 63.5068.5877.05 2.700 2.900 3.234 3.375 3.625 4.009 4.212 4.524 4.979 282-583715-62-583679-6————2-583660-7 68.5873.6682.1485.7392.08101.83106.98114.91126.24 2.900 3.100 3.434 4.350 4.650 5.084 4.524 4.836 5.282 302-583715-8————1-583692-12-583660-9 73.6678.7487.22110.49118.11129.13114.91122.83134.16 3.000 3.200 3.534 312-583715-9———————————— 76.2081.2889.76 3.100 3.300 3.634 4.836 5.148 5.594 323-583715-0————————3-583660-1 78.7483.8292.30122.83130.76142.09 4.800 5.100 5.534 33————————3-583692-1———— 121.92129.54140.56 3.300 3.500 3.834 343-583715-2———————————— 83.8288.9097.38 3.400 3.600 3.934 5.100 5.400 5.834 5.304 5.616 6.062 353-583715-3————3-583692-33-583660-4 83.3691.4499.92129.54137.16148.18134.72142.64153.97 3.500 3.700 4.034 5.250 5.550 5.984 5.460 5.772 6.218 363-583715-4————3-583692-41-583660-1 88.9093.98102.46133.35140.97151.99138.68146.61157.94 3.900 4.100 4.434 4.875 5.125 5.509 5.850 6.150 6.584 403-583715-83-583679-83-583692-8———— 99.06104.14112.62123.83130.18139.93148.59156.21167.23 4.000 4.200 4.534 413-583715-9———————————— 101.60106.68115.16 6.552 6.864 7.310 43————————————4-583660-1 166.42174.35185.67 4.900 5.100 5.434 6.125 6.375 6.759 7.350 7.650 8.084 7.644 7.956 8.402 504-583715-84-583679-84-583692-84-583660-8 124.46129.54138.02155.58161.93171.68186.69194.31205.33194.16202.08213.41 7.900 8.100 8.434 805-583715-7———————————— 200.66205.74214.22 Note:Other connector sizes can be made available, consult Tyco Electronics. 68 68 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors With End Caps (Continued) Typical Connector and Card Guide Assembly Double Slotted Single SlottedCard Guide (Without Stand-off) Card Guide Double Slotted Card Guide (With Stand-off) End Cap Stand-off Daughter Board Self-tapping #2 Self-tapping #2 Mother BoardScrew (2 Reqd.) Screw (1 Reqd.) .104[2.64] Max. Thickness*Self-tapping #2 Screw (2 Reqd.) *Must be .063[1.59] thick for use with Double Slotted Card Guides. 69 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors (Continued) Single Slotted Card Guides .074 .523Dia.Material: Glass-filled nylon, black 3.770 .225[1.88] [13.28] [95.76].210 .170[5.72]Thru Hole Part No. 583671-1 [5.33][4.32] Related Product Data: 3.585 .074[1.88] Dia. x.137 [91.06]Connectors used with—page 65 .175[4.45] Deep[3.48] Technical Documents: (pages 186, 187): Instruction Sheets 408-7498, 408-7506 Single Slotted Card Guide and Connector Mounting Contact Dimensions Centerline.091 .100 A EConnector[2.31][2.54] CenterlineDia..100 .263 2.546.68 .125 .288 3.187.31 A .150 .313 .225 .0353.817.95Dia.[5.72].200[0.89] E .156 .319[5.08]Mounting HoleMin. 3.968.10 70 70 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors (Continued) Double Slotted Without Stand-off Card Guides (Continued) 1.680 .080[42.67] 1.500[2.03].150 Material: Nylon, natural [38.10][3.81] .540 Part No. 583425-1 [13.72] Related Product Data: .300 .400 Connectors used with—page 65 [7.62][10.16] Technical Documents: (pages 186, 187): Instruction Sheets 408-7498, 408-7506 Double Slotted Card Guide and Connector Mounting Contact Centerline Dimensions .100 Connector [2.54].310 A ECenterline [7.87] .100 .328 2.548.33 .125 .353 .1753.188.96A [4.45].035 .150 .376 .200 EDia. [0.89] 3.819.60[5.08]Min. Mounting Hole .156 .384 3.969.75 Note:Mother Board must be .063[1.59] thick for use with Double Slotted Card Guides. Recommended PC Board Layout for Connectors With End Caps Contact Centerline Dimensions .100 .100 Connector [2.54][2.54]A ECenterline Dia. .100 .267 2.546.78 .125 .317 3.188.05A .035 .200 .150 .367Dia.E [0.89] [5.08]3.819.32 Mounting Hole .156 .379 3.969.62 71 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Twin Leaf Mother Board Connectors (Continued) Keying Plugs Material: Nylon, natural Technical Documents: (pages 186, 187): Instruction Sheet 408-7479 Type A Type B Intercontact On-Contact Connector Style* Intercontact Keying Plug On-Contact Keying Plug In-Row Type Contact of with without Type A Type B Insertion/Extraction Part Insertion/Extraction Spacing Contact End Caps End Caps Part Numbers Part Numbers Tool Numbers Tool Solder Post583715583485.100 530286-3—91081-2583714-191088-1 2.54Card Extender530268530291 Solder Post583679583533.125 530286-2530030-191081-1583714-191088-1 3.18Card Extender530265530290 Solder Post583692583407 .150 Wrap-Type Post583754583752530286-2530030-191081-1—— 3.81 Card Extender530278530270 Solder Post583660583486 .156 Wrap-Type Post583755583753530286-2530030-191081-1—— 3.96 Card Extender530267530282 *Refer to pages 66-68, as applicable, for specific connector sizes. Dimension A Connector A Centerlines Intercontact On-Contact .100 .040 .129 2.541.023.28 .475 .125 .050 .129 [12.06]3.181.273.28 Min. .150 .050 .160 3.811.274.06 .156 .050 .160 3.961.274.06 Recommended PC Board Cutout for Keying Plugs Card Extender Connectors Other Twin Leaf Mother Board Connectors .400 [10.16]Fits for .055-.070For more information on the connec- [1.4-1.78] tors shown here, consult TycoConnectors With End Caps PCBoard Electronics. Part Number .225 Centerlines Series* [5.72] .150 530278 3.81 .610 .156 [15.49]530267 3.96 *Consult Tyco Electronicsfor specific connector sizes. 72 72 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors Product Facts nZero insertion force; little or no effort required to insert and withdraw PC boards nReduced pad wear for extended board life nAllows all four sides of board to be used for input/output functions nAccepts double-sided boards nThree contact styles to choose from: vertical solder post, right-angle solder post and wrap-type post (2 and 3 high) nAvailable in .100 [2.54], .125 [3.18] and .156 [3.96] centerlines nThree configurations avail- able: open one end, open both ends and closed both ends nProducts indicated are recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 AMP Rotary Cam Zero 1.78] thick, with contact feature housings made from Performance Specifications Insertion Force (ZIF) Card centerline intervals of .100 94V-0 rated glass-filled Edge Connectors are avail- [2.54], .125 [3.18] and .156 polyester and mounting Current vs. Temperature Rise*: 3 amperes at 30°C able in sizes to fit most [3.96]. Row-to-row spacing ears for easy mounting to industry-standard printed of connector posts is .200 the mother board. Housings Operating Temperature: circuit boards. A clockwise [5.08] for .100 [2.54] and are available with one end –55°C to +105°C rotation of the cam handle .156 [3.96] connectors and open, both ends open and Contact Resistance: opens contacts to allow .250 [6.35] for .125 [3.18] both ends closed for side 20 milliohms max. zero-force insertion or connectors. and top daughter board Durability: Tested to 5000 cycles removal of PC boards— insertion. Integral board Contacts are nickel under- even boards with a large locks secure boards in the plated phosphor bronze number of contacts. Turning connectors. Accessories with gold plate in the the cam handle to close the include dust covers, cam contact area and tin-lead connector locks the board rods (with and without plated posts. Contact con- securely in place. Rotary boots) and cam keys for figurations include vertical Cam ZIF Connectors nut-driver actuation and and right-angle solder posts accept double-sided PC for tandem operation of and wrap-type posts. boards .054-.070 [1.37- connectors. Preassembled connectors *Consult Tyco Electronicsengi- neering when paralleling con- tacts for power applications. 73 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors, .100 x .200 [2.54 x 5.08] Centerline Vertical Connector, Solder Post Terminals Material and Finish: Housing—Glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .000030 [0.00076] gold per MIL-G- .130[3.3] Dia. Holes 45204 in contact area; .000100 .250[6.35] Dia. C’BoreClosed End .080[2.03] Deep[0.00254] tin-lead per MIL-P-81728 on post with entire contact underplated .000050 [0.00127] nickel per QQ-N-290 .440 .370 [11.18][9.40] Related Product Data: Board Lock Feature—On connectors B open one end and open both ends Daughter PC Board—.054-.070 [1.37-1.78] thickClosed Position .150 Performance Specifications— [3.81] page 73 Dust Cover—page 79 .250 [6.35]PC Board Hole Layout and Edge 1.095 Patterns—pages 81, 82[27.81] Ref. Special Application—pages 82, 96 .850 .050 [21.60] [1.27] Technical Documents: (pages 186, 187): .025 .018 E Product Specification[0.64].210[0.46] .100 108-9048Typ.[5.33]Typ. [2.54] Instruction Sheet 408-7911Typ. A .200 D[5.08] C Part Numbers No. of Dimensions Dual Open Open Closed A B C D E* Positions 1 1 One End Both Ends Both Ends .1251-531020-1—1-531019-12.100 2.800 3.100 2.300 22 53.3471.1278.7458.42.1601-531020-1—— .1251-531020-2—1-531019-22.400 3.100 3.400 2.600 25 60.9678.7486.3666.04.1601-531020-2—— 2.700 3.400 3.700 2.900 228.1601-531020-3—— 68.5886.3693.9873.66 3.000 3.700 4.000 3.200 31.1602-531020-1—— 76.2093.98101.6081.28 .1253-531020-2—1-531019-43.500 4.200 4.500 3.700 36 88.90106.68114.3093.98.1601-531020-4—— 3.900 4.600 4.900 4.100 .1251-531020-5—— 40 99.06116.84124.46104.14.1601-531020-5—— .1253-531020-3—— 4.200 4.900 5.200 4.400 431-531020-7—— 106.68124.46132.08111.76.160 222-531020-8—— .1251-531020-8531021-8— 4.900 5.600 5.900 5.100 501-531020-8—1-531019-8 124.46142.24149.86129.54.160 222-531020-9—— 5.900 6.600 6.900 6.100 60.1601-531020-91-531021-91-531019-9 149.86167.64175.26154.94 .1251-531020-0—— 6.400 7.100 7.400 6.600 652-531020-0—— 162.56180.34187.96167.64.160 223-531020-0—— *Metric equivalents in millimeters for post lengths Eare .125= [3.18]; .160= [4.06]. 1Recognized under the Component Program of Underwriters Laboratories Inc. 2Connectors without cam rod and boardlock. Notes:1.Connector with card slot open one end is shown for illustration purposes. 2.Other connector sizes can be made available, consult Tyco Electronics. 74 74 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors, .100 x .200 [2.54 x 5.08] Centerline (Continued) Right-Angle Connector, Solder Post Terminals Material and Finish: Housing—Glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .000030 [0.00076] gold per MIL-G- 45204 in contact area; .000100 [0.00254] tin-lead per MIL-P-81728 on post with entire contact underplated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Board Lock Feature—On connectors .130[3.3] Dia. Holes .250[6.35] Dia. C’Boreopen one end and open both endsClosed End .080[2.03] Deep Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— .440 .370 [11.18]page 73[9.40] Dust Cover—page 79 PC Board Hole Layout and Edge Patterns—pages 81, 82 B Special Application—page 82, 96 Closed Position .150 Technical Documents:[3.81] (pages 186, 187): .250 Product Specification[6.35] 1.095 108-9048 [27.81] Instruction Sheet 408-7911Ref. .160 [4.06].850 .050[21.60] [1.27] .025 [0.64].210 Typ.[5.33] .100 [2.54] .025Typ. A[0.64] .200Typ. [5.08] D .100 [2.54]C Bend Right Shown No. of Dimensions Bend Part Numbers Dual 1 Right (Open End ) A B C D Positions 2.400 3.100 3.400 2.800325R1-531395-2 60.9678.7486.3671.12 3.500 4.200 4.500 3.700 36R1-531396-4 88.90106.68114.3093.98 4.900 5.600 5.900 5.100 50L1-531396-8 124.56142.24149.86129.54 6.400 7.100 7.400 6.600 65R1-531396-0 162.56180.34187.96167.64 1Recognized under the Component Program of Underwriters Laboratories Inc. Notes:1.Connector with card slot open one end is shown. 2.Other connector sizes can be made available, consult Tyco Electronics. 3. Open both ends. 75 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors, .100 x .200 [2.54 x 5.08] Centerline (Continued) Vertical Connector, Wrap-Type Post Terminals Material and Finish: Housing—Glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .000030 [0.00076] gold per MIL-G- 45204 in contact area; .000100 [0.00254] tin-lead per MIL-P-81728 on post with entire contact underplated .000050 [0.00127] nickel per QQ-N-290 .130[3.3] Dia. HolesRelated Product Data: Closed End.250[6.35] Dia. C’Bore Board Lock Feature—On connectors .080[2.03] Deep open one end and open both ends .440 .370 Daughter PC Board—.054-.070 [11.18][9.40] [1.37-1.78] thick Performance Specifications— page 73 B Dust Cover—page 79 PC Board Hole Layout and Edge ClosedPatterns—pages 81, 82 .150Position Special Application—pages 82, 96[3.81] .250 [6.35] Technical Documents: 1.095 (pages 186, 187): [27.81] Ref.Product Specification .050 .850 108-9048[1.27] [21.60] Instruction Sheet 408-7911 .025 E[0.64] .025 .210 Typ. [0.64][5.33] .100Typ. [2.54] Typ. A .200 D [5.08] C Part Numbers No. of Dimensions Dual Open Open A B C D E* Positions 1 1 One End Both Ends 2.400 3.100 3.400 2.600 25.3801-531414-2— 60.9678.7486.3666.04 .5801-531414-41-531415-43.500 4.200 4.500 3.700 36 88.90106.68114.3093.98.3801-531414-4— 3.900 4.600 4.900 4.100 40.5801-531414-5— 99.06116.84124.46104.14 4.100 4.800 5.100 4.300 42.3801-531414-6— 104.14121.92129.54109.22 4.900 5.600 5.900 5.100 50.5802-531414-41-531415-8 124.46142.24149.86129.54 5.900 6.600 6.900 6.100 60.5801-531414-9— 149.86167.64175.26154.94 6.400 7.100 7.400 6.600 65.5801-531414-0— 162.56180.34187.96167.64 Eare . 5 8 0 . 3 8 0 1Recognized under the Component Program of Underwriters Laboratories Inc. Notes:1.Connector with card slot open one end is shown for illustration purposes. 2.Other connector sizes can be made available, consult Tyco Electronics. 76 76 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 = [9.65] (2-high wrap-type).= [14.73] (3-high wrap-type); *Metric equivalents in millimeters for post lengths Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors, .125 x .250 [3.18 x 6.35] Centerline Vertical Connector, Solder Post Terminals Material and Finish: Housing—Glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .000030 [0.00076] gold per MIL-G- 45204 in contact area; .000100 [0.00254] tin-lead per MIL-P-81728 on post with entire contact underplated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Board Lock Feature—On connectors.130[3.3] Dia. Holes Closed End.250[6.35] Dia. C’Boreopen one end and open both ends .080[2.03] Deep Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications—.440.370 [11.18]page 73[9.40] Dust Cover—page 79 PC Board Hole Layout and Edge BPatterns—pages 81, 82 Special Application—pages 82, 96 Closed Position.150 Technical Documents: [3.81] (pages 186,187): .250 Product Specification[6.35] 1.095 108-9048 [27.81] Instruction Sheet 408-7911Ref. .850 .050 [21.60] [1.27] .025 [0.64]E.018.210 .125Typ.[0.46][5.33] [3.18]Typ. Typ. A.250 [6.35]D C Part NumbersNo. ofDimensions DualOpenOpen ABCDE*Positions11One EndBoth Ends 3.3754.1254.4253.625 28.125—1-531024-3 85.73104.76112.4092.08 3.6254.3754.6753.875 30.1251-531023-4—92.08111.13118.7598.43 4.8755.6255.9255.125 40.1601-531023-41-531024-4 123.83142.88150.50130.18 Eare = [3.18]; 1Recognized under the Component Program of Underwriters Laboratories Inc. Notes:1.Connector with card slot open one end is shown for illustration purposes. 2.Other connector sizes can be made available, consult Tyco Electronics. 77 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 = [4.06].. 1 6 0. 1 2 5*Metric equivalents in millimeters for post lengths Card Edge Connectors (Solder Type, Board-to-Board) Rotary Cam ZIF Connectors, .156 x .200 [3.96 x 5.08] Centerline Vertical Connector, Solder Post Terminals Material and Finish: Housing—Glass-filled polyester, 94V-0 rated Contacts—Phosphor bronze, plated .000030 [0.00076] gold per MIL-G- 45204 in contact area; .000100 [0.00254] tin-lead per MIL-P-81728 on post with entire contact underplated .000050 [0.00127] nickel per QQ-N-290 .130[3.3] Dia. HolesRelated Product Data: Closed End.250[6.35] Dia. C’Bore Board Lock Feature—On connectors.080[2.03] Deep open one end and open both ends Daughter PC Board—.054-.070 .440.370 [1.37-1.78] thick [11.18][9.40] Performance Specifications— page 73 Dust Cover—page 79 B PC Board Hole Layout and Edge Patterns—pages 81, 82 Closed Special Application—pages 82, 96 Position.150 [3.81] Technical Documents: .250 (pages 186, 187):[6.35] 1.095 Product Specification[27.81] Ref.108-9048 .850Instruction Sheet 408-7911.050 [21.60] [1.27] .025 .210E[0.64].018 [5.33].156Typ.[0.46] [3.96]Typ. Typ.A.200 [5.08]D C Part NumbersNo. ofDimensions DualOpenOpenClosed ABCDE*Positions11One EndBoth EndsBoth Ends .125531025-3——3.2764.0884.3883.588 22 83.21103.83111.4691.14.160531025-9—531007-9 5.4606.2726.5725.772 36.160—1-531026-1—138.68159.31166.93146.61 6.5527.3647.6646.864 43.125531025-6—— 166.42187.05194.67174.35 Eare = [3.18]; 1Recognized under the Component Program of Underwriters Laboratories Inc. Notes:1.Connector with card slot open one end is shown for illustration purposes. 2.Other connector sizes can be made available, consult Tyco Electronics. 78 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 = [4.06].. 1 6 0. 1 2 5*Metric equivalents in millimeters for post lengths Card Edge Connectors (Solder Type, Board-to-Board) Accessories Dust Covers A Material: Rigid vinyl, black DimensionPart ANumbers 11.050 531863-2 280.67 48.000 531863-1 1219.20 Note:Other lengths can be made available upon request, consult Tyco Electronics. .348 [8.84] Cam Rods with Boot Material: .654 .835[16.61]Cam Rod—Stainless steel [21.21] Boot—Glass-filled polyester, yellow .200 .200 [5.08] [5.08].400A [10.16] DimensionPartDimensionPart ANumbersANumbers 3.185 6.385 650083-1650083-7 80.90162.18 3.7056.985 650083-2650083-8 94.11177.42 4.4707.485 650083-3650083-9 113.54190.12 5.285 7.725 650083-41-532563-0 134.24196.22 5.9008.320 650083-61-650083-7 149.86211.34 5.975 532563-7Note:Other lengths can be made avail- 151.77 able upon request, consult Tyco Electronics. 79 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Accessories (Continued) Cam Rods without Boot.125 [3.18] Material: Stainless steel .775 [19.69] .200.045.055 [5.08][1.14][1.40] A DimensionPartDimensionPart ANumbersANumbers 2.2006.000 2-531004-72-531004-8 55.88152.40 6.2502.700 2-531004-91-531004-6 158.7568.58 3.3006.750 1-531004-73-531004-0 83.82171.45 8.2504.750 2-531004-43-531004-2 209.55120.65 5.00012.500 2-531004-01-531004-4 127.00317.50 5.500 2-531004-6Note:Other lengths can be made avail- 139.70 able upon request, consult Tyco Electronics. .125 [3.18] .252 [6.40] .260.045 .055 [6.60][1.14] [1.40] A DimensionPart ANumbers 3.380 645293-3 85.85 4.50 645293-8 114.30 5.200 645293-6 132.08 6.90 645293-7 175.30 13.120 645293-5 333.25 Note:Other lengths can be made avail- able upon request, consult Tyco Electronics. 80 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Recommended PC Board Hole Layouts Mother Board Hole Layout, Vertical Through-Board Connectors .048.128Dia. Typ. Dia.[1.22] [3.25] (2 Plc.) W CL XA* B* *Refer to individual connector specifications. CLWX .100.200.350 2.545.088.89 .125.250.375 2.186.359.53 .156.200.406 3.965.0810.31 Mother Board Hole Layout, Right-Angle Through-Board Connectors .100 .200Typ. [2.54] [5.08] .048 Dia. Typ..400[1.22] Pin No. 1 (Ref.)Max. [10.16] A* PCBoard Edge *Refer to individual connector specifications. 81 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Recommended PC Board Edge Pattern Daughter Board Edge Pattern .700 [17.78] Min. .270 [6.86] Min. CL +.005 C-.000 CL Minus.006 [0.15][+0.13] A ±.005 B[±0.13] CL = .100 [2.54]CL = .125 [3.18]CL = .156 [3.96]No. of C = .050 [1.27]C = .078 [1.98]C = .094 [2.39]Dual PositionsABABAB 2.1002.2883.2673.576 22—— 53.3458.1283.2190.83 2.4002.588 25———— 60.9665.74 2.7002.8883.3753.613 28—— 68.5873.3685.7391.77 3.6253.863 30———— 92.0898.12 3.0003.188 31———— 76.2080.98 3.5003.6885.4605.760 36—— 88.9093.68138.68146.30 3.9004.0884.8755.113 40—— 99.06103.84123.83129.87 4.2004.3886.5526.852 43—— 106.68111.46166.42174.04 4.9005.088 50———— 124.46129.24 5.9006.088 60———— 149.86154.64 6.4006.588 65———— 162.56167.34 Tandem Application Special Application Special Rod (Part No. Series 645293) Allows Customer Supplied Nut Driver Actuation (Refer to page 80.) Note:Contact Tyco Electronics for information concerning special tandem connectors. 82 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors Product Facts nMinimizes force needed to install and remove printed circuit boards nAvailable in lever and bell crank styles nLever styles allow side and top card entry nWiping action contacts enhance electrical properties nContacts on .100 x .100 [2.54 x 2.54] or .125 x .125 [3.18 x 3.18] centers n.025 [0.64] square posts nAccepts PC boards from .054 to .070 [1.37 to 1.78] in thickness nNormally closed design leaves springs in relaxed position n50 to 175 dual positions available on .100 [2.54] centerline connectors and 40 to 140 dual positions available on .125 [3.18] centerline connectors Performance Specifications AMP Linear Zero Insertion required, Tyco Electronics and housing modules with- Current vs. Temperature Rise*: Force (ZIF) PC Board Edge has a line of preassembled out removing the entire 3 amperes at 30°C Connectors are available in connectors with tin-plated housing assembly from the Operating Temperature: both lever and bell crank solder terminals. All these board. –65°C to +85°C actuated styles and can be configurations are available Contact Resistance: provided as panel assem- in a broad range of sizes. 16 milliohms max. blies, separate housings With ZIF style connectors, and contacts or as pre- Durability: Tested to 250 cycles intermittencies can occur if (board-to-contact actuation) assembled with solder post a contact comes to rest on terminals. a piece of foreign matter Panel assemblies include a (dust and dirt particles) housing with ACTION PIN found on PC boards. To press-fit solderless contacts decrease the probability of mounted on an epoxy this happening, all connec- board for rack application. tors have been designed to Separate housing assem- include a wiping contact blies and ACTION PIN con- which produces a wiping tacts allow customer action. This action, pro- assembly. These can be duced by the geometry and mounted as close as .625 bending movements of the [15.88]. More design lati- beam, pushes aside debris tude for high density appli- and allows for good electri- cation is provided by the cal connection by cleaning side entry lever-type con- the actual point of contact. nector, permitting use of all In addition, all connectors sides of the PC board for have removable wings edge-type I/O connections which make it possible to *Consult Tyco Electronicsengi- (see page 133). Where neering when paralleling con-repair or replace damaged solder applications are tacts for power applications.cam rails, handles, contacts 83 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .100 x .100 [2.54 x 2.54] Centerline Lever Style, Side Entry Housing with Solder Posts Material and Finish: Housing—Glass-filled polyester, black Contacts—Copper alloy 725, plated .000015 [0.00038] min. gold per MIL-G-45204 in contact area; .000100 [0.00254] min. tin-lead on post with entire contact underplated .000050 [0.00127] min. nickel per QQ-N-290 Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 88 Special Application—page 96 Technical Documents: (pages 186, 187): Product Specification 108-14015 Application Specification 114-26003 Instruction Sheets 408-2995, 408-2999, 408-6915 .450A [11.43] .500B [12.70] C Last Contact PositionC First Contact PositionMax.LL .355 Closed[9.02]* .103 Closed EndC[2.62] Open EndOpen.845 .600 [21.46] [15.24]P P.100 Typ..845[2.54] [21.46].175Mounting.206 [4.45]Hole C[5.23]L.100 [2.54]Mounting .190Hole CL1.075[4.83] [27.31] Section P-P No. ofDimensionsPart *Card slot depth.Dual NumberABCPositions 6.1133.4002.000 351-645135-2 155.2786.3650.80 11.6137.9003.000 801-645135-1 294.97200.6676.20 13.6139.9003.000 1001-645135-5 345.77251.4676.20 Note:Other connector sizes can be made available, consult Tyco Electronics. 84 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .100 x .100 [2.54 x 2.54] Centerline (Continued) Lever Style, Side Entry Panel Assembly Material and Finish: Housing—Glass-filled polyester, black Contacts—Copper alloy 725, plated .000015 [0.00038] gold per MIL-G- 45204 in contact area; .000001 [0.00003] min. gold flash per MIL-G- 45204 on post with entire contact under- plated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— page 83 .343PC Board Hole Layout and EdgePC Board [8.71].355ChannelPattern—page 88 Max.[9.02] ACTION PIN Contacts—Card Slot Depthpages 88, 94 Open EndClosed End Tooling—page 95 CSpecial Application—page 96 1.555Technical Documents: [39.50] (pages 186, 187): Product Specification.125 [3.18]108-14015 D 1.425 Application Specification [36.16] 114-26003.812.150[3.81]A [20.62]CountersunkInstruction Sheets 408-2995, Hole (2 Plcs.).100.100408-2999, 408-6915.750 [2.54][2.54][19.05] Typ. B No. ofDimensionsPart Dual NumbersABCDPositions 7.40010.1253.000.615 751-645145-0 251.46320.6876.2015.62 9.90012.6253.000.615 1001-645145-5 251.46320.6876.2015.62 12.90015.6253.000.615 1302-645145-1 251.46320.6876.2015.62 13.90016.6253.000.615 1402-645145-3 353.06422.2876.2015.62 14.90017.6253.000.615 1502-645145-5 251.46320.6876.2015.62 15.90018.6253.000.615 1602-645145-7 403.86473.0776.2015.62 15.90018.6253.000.455 160147400-1 403.86473.0776.2011.56 Note:Other connector sizes can be made available, consult Tyco Electronics. 85 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .100 x .100 [2.54 x 2.54] Centerline (Continued) Lever Style, Top Entry Panel Assembly Material and Finish: Housing—Glass-filled polyester, black Contacts—Copper alloy 725, plated .000015 [0.00038] gold per MIL-G- 45204 in contact area; .000001 [0.00003] min. gold flash per MIL-G- 45204 on post with entire contact under- plated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 88 ACTION PIN Contacts— pages 88, 94 .343 Tooling—page 95PC Board [8.71] .355Channel Max. [9.02] Card Slot Technical Documents:Depth Closed End(pages 186, 187):Closed End Product SpecificationsC 108-14015, 108-26003 Application Specification 1.555114-26003 [39.50] Instruction Sheets 408-2995, 408-2999, 408-6915 .125 [3.18].615 1.425[15.62] [36.16] .812.150[3.81]A [20.62]Countersunk Hole (2 Plcs.).100.100.750 [2.54][2.54][19.05] Typ. B No. ofDimensionsPart Dual NumbersABCPositions 10.90013.6253.000 1101-645147-7 276.86346.0876.20 11.90014.6253.000 1201-645147-9 302.26371.4876.20 Note:Other connector sizes can be made available, consult Tyco Electronics. 86 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .100 x .100 [2.54 x 2.54] Centerline (Continued) Lever Style, Side Entry Housing Material: Glass-filled polyester, black Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Mounting Screws—Customer sup- plies, must be applied before opening connector Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 88 ACTION PIN Contacts— pages 88, 94 Tooling—page 95 Special Application—page 96 A Ref. Technical Documents: (pages 186, 187):B Product SpecificationsC Last Contact PositionC First Contact PositionLLClosed 108-14015, 108-26003 Open EndClosed End Application Specification COpenP108-26003 Instruction Sheets 408-2995, 408-2999, 408-6915 .450 [11.43] P Mounting.206 .355Hole C[5.23]L [9.02]* .815 [20.70].600 [15.24] No. ofDimensionsPart Dual NumbersABCPositions 7.6134.9002.000 50645115-5 193.37124.4650.801- 11.1137.4003.000Section P-P751-645115-0 282.27187.9676.20 11.6137.9003.000 801-645115-1 294.97200.6676.20 *Card slot depth. 13.6139.9003.000 1001-645115-5 345.77251.4676.20 14.61310.9003.0001-645115-7 110 371.17276.8676.203-645115-2 15.11311.4003.000 1151-645115-8 383.87289.5676.20 16.11312.4003.000 1252-645115-0 409.27314.9676.20 16.61312.9003.000 1302-645115-1 421.97327.6676.20 17.61313.9003.000 1402-645115-3 447.37353.0676.20 19.61315.9003.000 1603-645115-3 498.17403.8676.20 21.11317.4003.000 1753-645115-0 536.27441.9676.20 Note:Other connector sizes can be made available, consult Tyco Electronics. 87 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .100 x .100 [2.54 x 2.54] Centerline (Continued) ACTION PIN Contacts with Wiping Feature, Recommended PC Board Hole Layout and Edge Pattern, .100 [2.54] Centerline .100 [2.54] Centerline Material and Finish: Related Product Data: Mother Board Hole Layout .047 Dia. Typ. [1.19] Copper alloy 725, plated .000015 Performance Specifications— (Solder Post Only)* [0.00038] gold per MIL-G-45204 in page 83 .120 Dia.contact area; .000001 [0.00003] min.[3.05] ACTION PIN Contact Description gold flash per MIL-G-45204 on post and Application Specification— with entire contact underplated .000050 page 94 [0.00127] nickel per QQ-N-290 Tooling—page 95 CL C Technical Documents:B (pages 186, 187): *For ACTION PIN post hole diameter, see page 94. Instruction Sheet 408-2665 DimensionsConnector StyleCLABC .100.100.206.175 A Lever2.542.545.234.45 (Comb) .045 [1.14] Contact Area Daughter Board Edge PatternPrenotched for Breakoff at Assembly .745 [18.92] .200 .600Min. Ref.[5.08] [15.24] 1.485B [37.72]Min. Prenotched for Breakoff.070.100 at Assembly[1.78][2.54] .740 .098[18.80] Typ. [2.49] Post Area .100(No. of Pos. –1) +.196A [2.54 (No. of Pos. –1) +4.98]Max. .100.025 Sq. [2.54][0.64] Contact Combs Number ofDimensionsConnectorEntryDimensionPart ContactsStyleStyleABANumber Per Comb* .240 5.400Side— 6.10554-119311-1 137.16Lever .240.320 Top 6.108.13*At least two (2) contact combs required per housing. Note:Other sizes can be made available, consult Tyco Electronics. Reeled Contacts Number of Part Contacts Number Per Reel 35,000119196-6 Note:Other plating combinations and thicknesses can be made available, consult Tyco Electronics. 88 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .125 x .125 [3.18 x 3.18] Centerline Panel Assembly Lever Style, Side Entry Material and Finish: Housing—Glass-filled polyester, black Contacts—Copper alloy 725, plated .000015 [0.00038] gold per MIL-G- 45204 in contact area; .000001 [0.00003] min. gold flash per MIL-G- 45204 on post with entire contact under- plated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 93 ACTION PIN Contacts— pages 93, 94 Tooling—page 95 PC Board.343 Special Application—page 96Max. Channel[8.71].355 [9.02] Card Slot Technical Documents:Depth Open EndClosed End (pages 186, 187): C Instruction Sheets 408-2995, 408-6915, 408-6916 .615 1.555[15.62] [39.50] .125 1.425[3.18] [36.16] .812 .150 [3.81]A[20.62] Countersunk Hole (2 Plcs.).125.125.750Typ. [3.18] [3.18][19.05] B No. ofDimensionsPart Dual NumbersABCPositions 4.8757.6252.000 401-645146-5 123.83193.6850.80 6.8759.6253.000 561-645146-9 174.63244.4876.20 7.37510.1253.000 601-645146-0 187.32257.1776.20 8.87511.6253.000 721-645146-3 225.43295.2876.20 10.37513.1253.000 841-645146-6 250.83320.6876.20 15.37518.1253.000 1242-645146-6 390.53460.3876.20 Note:Other connector sizes can be made available, consult Tyco Electronics. 89 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .125 x .125 [3.18 x 3.18] Centerline (Continued) Bell Crank Style, Top Entry Panel Assembly Material and Finish: Housing—Glass-filled polyester, black Contacts—Copper alloy 725, plated .000015 [0.00038] gold per MIL-G- 45204 in contact area; .000001 [0.00003] min. gold flash per MIL-G- 45204 on post with entire contact under- plated .000050 [0.00127] nickel per QQ-N-290 Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 93 ACTION PIN Contacts— pages 93, 94 Tooling—page 95 .935Technical Documents:Max. [23.75] (pages 186, 187): .355 Instruction Sheets 408-2995,[9.02] 408-6915, 408-6916Card Slot 3.620Depth Ref.Closed End [91.95] (Open) 1.555 [39.50] .125 .615[3.18] [15.62] 2.41.609 A [54.38][15.47] .125.125 Typ. [3.18][3.18] .750 [19.05] B No. ofDimensionsPart Dual NumbersABPositions 7.37510.625 601-645149-0 187.33269.88 9.87513.125 801-645149-5 250.82333.38 13.87517.125 1122-645149-3 352.43434.98 17.37520.625 1403-645149-0 441.33523.88 Note:Other connector sizes can be made available, consult Tyco Electronics. 90 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .125 x .125 [3.18 x 3.18] Centerline (Continued) Lever Style, Side Entry Housing Material: Glass-filled polyester, black Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Mounting Screws—Customer supplied, must be applied before opening connector Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 93 ACTION PIN Contacts— pages 93, 94 Tooling—page 95 Special Application—page 96 Technical Documents: (pages 186, 187): Instruction Sheets 408-2995, 408-6915, 408-6916 .475 [12.07] A Ref. .355 [9.02]* B CCFirst Contact PositionLast Contact Position.815LLClosed [20.7] .600.115 Open End[15.24]Closed End[2.92]C P Open 1.087 [27.61] PSection P-P .218Mounting HoleMounting Hole [5.54]C*Card slot depth.CLL No. ofDimensionsPart Dual NumberABCPositions 14.11210.3753.000 841-645116-6 358.44263.5276.20 16.11212.3753.000 1002-645116-0 409.24314.3376.20 17.61215.7753.000 1122-645116-3 447.34400.6876.20 19.11217.2753.000 1242-645116-6 485.44438.7876.20 Note:Other connector sizes can be made available, consult Tyco Electronics. 91 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .125 x .125 [3.18 x 3.18] Centerline (Continued) Housing Bell Crank Style, Top Entry Material: Glass-filled polyester, black Related Product Data: Daughter PC Board—.054-.070 [1.37-1.78] thick Mounting Screws—Customer supplied, must be applied before opening connector Performance Specifications— page 83 PC Board Hole Layout and Edge Pattern—page 93 ACTION PIN Contacts— pages 93, 94 Tooling—page 95 Technical Documents: (pages 186, 187): Instruction Sheets 408-2995, 408-6915, 408-6916 A .475 Ref.1.062[12.07] [26.97] (Open)1.874.312 B [47.60][7.92] CLast Contact PositionLCFirst Contact PositionL .500.355 [12.70][9.02]* Closed End .115 .815.115[2.92]P2.562 [20.7][2.92][65.07] (Closed) .6001.820 [15.24][46.23] Mounting Hole.187 P 1.250C[4.75]LMounting Hole [31.75] CL Section P-P *Card slot depth. No. ofDimensionsPart Dual NumbersABPositions 8.5626.375 521-645142-8 217.47161.93 9.5627.375 601-645142-0 242.87187.32 13.1259.875 801-645142-5 333.37250.82 16.06213.875 1122-645142-3 407.97352.43 Note:Other connector sizes can be made available, consult Tyco Electronics. 92 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors, .125 x .125 [3.18 x 3.18] Centerline (Continued) ACTION PIN Contacts with Wiping Feature, Recommended PC Board Hole Layout and Edge Pattern, .125 [3.18] Centerline .125 [3.18] Centerline Material and Finish: Related Product Data: Mother Board Hole Layout .047 Dia. Typ. [1.19] Copper alloy 725, plated .000015 Performance Specifications— (Solder Post Only)* [0.00038] gold per MIL-G-45204 in page 83 .120 Dia. contact area; .000001 [0.00003] min.[3.05] ACTION PIN Contact Description gold flash per MIL-G-45204 on post and Application Specification— with entire contact underplated .000050 page 94 [0.00127] nickel per QQ-N-290 Tooling—page 95 CL C Technical Documents:B (pages 186, 187): *For ACTION PIN post hole diameter, see page 94. Instruction Sheet 408-2665 DimensionsConnector StyleCABCL .125.125.218.187 ALever 3.183.185.544.75 (Comb) .125.1251.250.187 Bell-Crank 3.183.1831.754.75 .045 [1.14] Contact Area Prenotched for Breakoff at Assembly Daughter Board Edge Pattern .750 .600[19.05]Ref. [15.24] 1.490 [37.85] .200 Min. [5.08] B Min..740 [18.80] Post Area .125.090 Typ. [3.18][1.78] .110 .025Typ..125Sq.[2.79] [0.64] [3.18].125(No. of Pos. –1) +.220A [3.18 (No. of Pos. –1) +5.59]Max. Contact Combs Number ofDimensionsConnectorEntryDimensionPart ContactsStyleStyleANumberAB Per Comb* .240 Side—6.875 561-119950-26.10 174.63Lever .240.320 Top 6.108.13*At least two (2) contact combs required per housing. .775.600Note:Other sizes can be made available, consult Tyco Electronics.Bell-CrankTop 19.6815.24 93 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors (Continued) AMP ACTION PIN Press-Fit Contacts ACTION PIN contacts provide a reliable press-fit connection. Localized pressure in the interface area entails oxide break-through and helps prevent corrosion in the harshest environments to provide a reliable connection virtually every time. Also, radial and axial distortion are controlled to meet today’s standards for multilayer board applications. PC Board Thickness ACTION PIN contacts are designed for use in a variety of PC board thicknesses. However, certain ACTION PIN contacts are to be used in specific ranges of board thicknesses. To promote optimum performance, the recommended board thick- nesses provided with the con- Annular Ring (See Note)� nector being used must be followed.Drilled Hole` Copper Thickness´ Tin-Lead Thicknessˆ Plated Through-Hole˜ ACTION PIN Contact/PC Board Applications ACTION PINPlatedPlating ThicknessesRadial Hole DistortionConnectorDrilled Hole ContactThrough-Hole TypeDiameter`Copper´*Tin-LeadˆAverageMaximumMaterial ThicknessDiameter˜ .0003±.001.025.0453.001-.003.037-.043NotNot Linear ZIF0.008±0.030.641.1510.03-0.080.94-1.09SpecifiedSpecified Min. *Maximum hardness of copper layer is 150 Knoop. Note:Recommended annular ring diameter is hole diameter plus .020[0.51]. 94 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors (Continued) Assembly tooling is not Typical procedure is to Tooling required except when place a PC board on the using connectors with support fixture, insert contact ACTION PIN contacts. combs into the printed circuit ACTION PIN contact board with the contact appli- assembly requires an cator and seat with the arbor arbor-style bench tool with a tool. Next, remove the carrier capacity of 40 lb [178 N] per strip from the contact combs contact, a support fixture, with the carrier break-off tool. contact applicator, carrier Place the housing over the removal tool and housing contacts with the housing assembly tool. assembly tool, and repeat the entire process until the board is complete. .100 x .100 [2.54 x 2.54] Centerline Connectors No. ofCarrierHousingHousingWing Removal/HousingContact Replacement ToolsT-Bar DualRemovalAssemblyRemovalReplacementInsertion ApplicatorWith HousingWithout HousingPositionsToolToolToolToolTool 50266267-4265924-4313136-1 80266267-3265924-4313136-2 100266267-4265924-4 110266267-5265924-4313136-3 313256-1266233-1266264-1266235-13-265871-2115266267-5265924-4 120266267-5265924-4 125266267-4265924-4313136-4 140266267-4265924-4 175266267-5265924-4313136-5 .125 x .125 [3.18 x 3.18] Centerline Connectors No. ofCarrierHousingHousingWing Removal/HousingContact Replacement ToolsT-Bar DualRemovalAssemblyRemovalReplacementInsertion ApplicatorWith HousingWithout HousingPositionsToolToolToolToolTool 40313139-1265924-4313136-1 52313139-2265924-6 56313139-2265924-6313136-2 60313139-2265924-7 72313139-3265924-4313256-1266233-1266264-1266235-13-265871-2 313136-3 84313139-2265924-5 112313139-2265924-7313136-4 124313139-2265924-5 313136-5 140313139-2265924-5 95 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) Linear ZIF Connectors (Continued) Special Application Use Linear and Rotary ZIF Connectors as Card Guides to access more sides of the Daughter Board. Standard Edge II (pages 15 thru 27) or AMP PACE Connectors (pages 98 thru 115) 96 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) ACTION PIN Press-Fit Contacts The Reliable Plated Through- Hole Interconnect Solderless interconnections have been popular in elec- trical and electronic appli- cation with world-wide success for decades. They provide reliable electrical and mechanical stability and offer applied-cost sav- ings across the board. For PC board applications, ACTION PIN contacts from Tyco Electronics provide these features: n Large gas-tight contact zone n Reliability due to stored energy in compliant pin contacts n No damage to plated • Solder spots; short Principle of the Tyco to accommodate hole toler- through-holes during circuits between ances. The compliant pin Electronics Compliant installation printed circuits also reduces strain on the ACTION PIN Contact board. With a rigid pin, the n Especially suited for mul- • Flux residuals When an ACTION PIN con- elastic strain energy is tilayer PC boards tact is inserted into a plated • Thermal strain on stored entirely in the board, n Less costly board manu- through-hole, two spring printed circuit leading to damage of the facturing due to larger members are compressed, boards and plated through-holes. With hole tolerances com- exerting force against the components the ACTION PIN contact, pared to use of solid hole for gas-tight connec- the residual force of the • Degasing of plated pins tion. The diameter of the elastic deformation main- through-holes hole is smaller than the n Application can be tains stored energy to pro- Solderless press-fit inter- diagonal size of the pin made by end-user duce a tight contact zone connections using the (see cross-section illustra- between the pin and the n Repairability—contact ACTION PIN contact are tion below). plated through-hole. This can be replaced in the primarily integrated in, but The beam characteristics of provides long term electri- not limited to, backplanes. same pin location (two the pin are designed so cal and mechanical reliabili- repairs) Solderless press-fit inter- that a plastic, as well as an ty of the interconnection. connections are used in n Installation with no heat elastic, deformation takes racks, especially where cycling of board place during insertion. The connectors must be fixed two spring members com- n Permits mass insertion on the solder side of the PC press to different degrees by minimizing forces board and/or component needed to insert pins as side. In these applications, compared to solid pin the holes for ACTION PIN press-fit application contact connectors are cov- ered during the soldering n Significant applied-cost process and press-fitting is savings in many applica- performed after soldering. tions Other applications for Since ACTION PIN contacts ACTION PIN contact do not have to be soldered, interconnections include PC issues associated with sol- boards that incorporate der are eliminated, such as: components using surface MinimumMaximum mount technology (SMT). • Faulty solder jointsHole Dia.Hole Dia. Here, too, press-fit intercon-.037 [0.94].043 [1.09] • Solder fumes; cont- nections can be applied aminant’s are after soldering, thus elimi- Cross-Section Area from Tyco Electronics ACTION PIN Press-Fitdeposited on the nating complications Contact in Printed Circuit Board Holes from Tyco Electronics.contacts associated with connectors suitable for surface Note:ACTION PIN contact mounting hole specifications are presented in mounting. each product section, where applicable. 97 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors Performance Specifications Electrical Characteristics Contact Resistance: ACTION PIN Contact Interface—5 milliohm Spring Contact to Test Board—11.5 milliohms Total Circuit Resistance: 12 milliohms Continuous Current Rating*: 3 amperes Insulation Resistance: 5,000 milliohms Dielectric Withstanding Voltage: .100 [2.54] Centerline Spacing— 1,000 VAC at sea level; 350 VAC at 50,000 ft. [15,240 m]; 275 VAC at 70,000 ft. [21,336 m] .125 [3.18] Centerline Spacing— 1,500 VAC at sea level; 500 VAC at 50,000 ft. [15,240 m]; 235 VAC at 70,000 ft. [21,336 m] Physical Characteristics Card Insertion Force (Max.): 16 oz [4.45 N] per contact pair ACTION PIN Contact Post Card Extraction Force (Min.): 1 oz [.278 N] per contact pair ACTION PIN Contact Post Retention (in PC board): .100 x .100 [2.54 x 2.54]— 7.5 lb. [33.4 N] min. AMP PACE (Pre-Assembled are replaceable through the AMP PACE Connectors are Operating Temperature: Card Edge) Connectors are top of the connector available with post center- –55°C to +85°C the latest innovation in the housing, for maximum line spacings of: evolution of backplane archi- flexibility in your backplane .100 x .100 [2.54 x 2.54] Durability: Tested to 100 cycles (100 tecture. Designed to short- packaging. .100 x .200 [2.54 x 5.08] insertions and withdrawals at a rate not exceeding 10 cycles per minute) en manufacturing time and .125 x .125 [3.18 x 3.18] At the heart of the reduce applied costs, these .125 x .250 [3.18 x 6.35] Salt Spray: MIL-STD-1344, AMP PACE Connector is one-step, pre-assembled .156 x .200 [3.96 x 5.08] Method 1001 AMP’s proven and reliable connectors are ready for ACTION PIN Contact. This Important: Physical Shock: MIL-STD-1344, mounting and mass inser- Method 2004 unique contact has superior Application tooling is tion. In addition, design electrical and physical absolutely necessary to Thermal Shock: MIL-STD-1344, features such as removable characteristics that are top insert connectors into PC Method 1003, Cond. A housings and contacts, that of the line in the industry. boards. See page 115 for Humidity: MIL-STD-1344, application tooling. Method 1002, Type II Vibration: MIL-STD-1344, Method 2005 Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. LR7189 *Consult Tyco Electronicsengi- neering when paralleling con- tacts for power applications. 98 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors (Continued) Product Facts Repairability— (See below for details) Individual contacts can be removed without removing the housing; housings can be removed without removing posts. Important:APC board must be inserted into the connector when removing the contact. Precision Plated Contacts— Selective plating puts gold where it is needed for superior electrical contact at a reasonable cost. Beam Contact Design— The contact’s unique beam design accommodates and compensates for daughter board warp and stress providing long-term, reliable performance (100 gram minimum normal force). Gas-Tight Connection— Spring sections of ACTION PIN Contacts compress in opposite directions, maintaining a gas-tight fit with the PC board. Contact Tip Alignment Strip— Polyester strip provides straight and stable pin alignment for damage-free entry into the PC board.Precision Plated Post— Gold plating can be applied to the entire post, or just the post tip for improved pluggability. Repairability Details Remove and replace contactsRemove and replace housing without removing housing.without removing contacts. (See page 115 for Contact Replacement Tools.) 99 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors, .100 x .100 [2.54 x 2.54] Centerline Standard Housing .100 [2.54].380 [9.65] .040 BMin. [1.02] Contact Finish Area ±.006 C[±0.15] .415 [10.54] .005/.007Card Slot [0.13/0.18]Depth See E Below Post Length and .025 Sq.Finish Area [0.64] AcceptsContact Tip Post .054 to .071Alignment Strip [1.37 to 1.80]on .475[12.07] PC Boards.100Post Length A[2.54] .100 [2.54] Typical Closed End/ Open End Housings .100 [2.54] .135Connectors can be [3.43]mounted in pairs using any size combinations. Example: 1-30 pos. + 1-60 pos.Detail E = 1-90 pos. Keying Plugs On-Contact (Plastic)Intercontact (Plastic) Part No. 119802-2Part No. 118982-1 100 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors, .100 x .100 [2.54 x 2.54] Centerline (Continued) Material and Finish:No. ofDimensionsClosed/ClosedClosed/OpenPost Dual LengthHousing—Black glass-filled polyester,ABCStandardScoopStandardPositions 94V-0 rated .180 119734-1119736-1— 4.57Contacts—Phosphor bronze, plated1.4001.7341.604 15 35.5644.0440.74gold .000030 [0.00076] min. thk. over.475 119237-1—— 12.07.000050 [0.00127] min. thk. nickel in 1.9002.2342.104.180contact area, .000100 [0.00254] min.20119734-6—— 48.2656.7453.444.57 tin-lead on posts, with entire contact 2.4002.7342.604.180 underplated .000050 [0.00127] min.251-119734-1—— 60.9669.4466.144.57 nickel 2.7003.0342.904.180 281-119734-4—— Contact Tip Alignment Strip—Clear68.5877.0673.764.57 polyester, type D3.0003.3343.204.475 311-119237-7—— 76.2084.6881.3812.07 .180Note:Full palladium-nickel plated 2-119734-1—119831-6 4.573.4003.7343.604posts and other platings and plating 35 83.3694.8491.54thicknesses can be made available..475 ——119413-6 12.07 3.9004.2344.104.180 402-119734-62-119736-6— 99.06107.54104.244.57 Related Product Data: 4.7005.0344.904.475 483-119237-4—— Performance Specifications—119.38127.86124.5612.07 page 984.9005.2345.104.180 503-119734-6—— 124.46132.94129.644.57 Accessories—page 112 5.9006.2346.104.180 604-119734-64-119736-6—PC Board Edge Pattern—page 113 149.86158.34155.044.57 ACTION PIN Contact Mounting Note:Other connector sizes and connectors with card scoops can be made available, consult Tyco Electronics. Hole Specifications—page 114 Application Tooling—page 115 Contact Replacement Tools— page 115 Special Application—page 96 Technical Documents: (pages 186, 187): Product Specifications 108-14019, 108-26003 Application Specification 114-26002 Instruction Sheets 408-2978, 408-2979, 408-6881, 408-9091, 408-9188 101 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors, .100 x .200 [2.54 x 5.08] Centerline Standard Housing .100 .364 [2.54].360 [9.24] [9.14] B ±.006.415C[±0.15] [10.54] .005/.007Card Slot.545 .040[0.13/0.18]Depth[13.84] Min. [1.02] Contact See E BelowFinish Area Post Length and.025 Sq.Finish Area[0.64] Contact Tip .093PostAcceptsMin.Alignment Strip [2.36] .054 to .071on .475[12.07] [1.37 to 1.80]and .702[17.83] PC BoardsPost Lengths.200 [5.08]A .100 [2.54] Housing with High Card .100 Scoops[2.54].390.364 [9.91][9.24]B .515±.006 C[±0.15][13.08] Card Slot.645.005/.007 Depth.040[16.38][0.13/0.18]Min. [1.02] Contact Finish AreaSee E Below Post Length .025andSq. [0.64] Finish Area .093AcceptsPostMin. [2.36] .054 to .071Contact Tip [1.37 to 1.80]Alignment Strip PC Boardson .475[12.07].200 and .702[17.83][5.08] Post LengthsA .100 [2.54] Keying Plugs Intercontact (Plastic) Part No. 118982-1 .135 [3.43] On-Contact (Plastic) Detail EPart No. 119802-2 102 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors, .100 x .200 [2.54 x 5.08] Centerline (Continued) Material and Finish:No. ofDimensionsClosed End/Closed EndPost Dual LengthHousing—Black glass-filled polyester,ABCStandardHigh ScoopPositions 94V-0 rated .9001.2341.104.180 10—1-650297-1 22.8631.3428.044.57Contacts—Phosphor bronze, plated gold .000030 [0.00076] min. thk. over1.4001.7341.604.180 151-119738-1119791-1 35.5644.0440.744.57.000050 [0.00127] min. thk. nickel in 1.7002.0341.904.180contact area, .000100 [0.00254] min.181-119738-4— 43.1851.6648.364.57 tin-lead on posts, with entire contact 1.9002.2342.104.180 underplated .000050 [0.00127] min.201-119738-6— 48.2656.7453.444.57 nickel .180 1-119738-8— Contact Tip Alignment Strip—Clear4.572.1002.4342.304 22 polyester, type D53.3461.8258.52.475 1-119216-8650123-8 12.07 Note:Full palladium-nickel plated2.3002.6342.504.180 241-119738-0— 58.4266.9063.604.57posts and other platings and plating thicknesses can be made available..180 1-119738-1— 4.572.4002.7342.604 25 60.9669.4466.14.702 1-119163-1— 17.83Related Product Data: .180 1-119738-4—Performance Specifications—4.572.7003.0342.904 28page 9868.5877.0673.76.475 1-119216-4— 12.07Accessories—page 112 .180 PC Board Edge Pattern—page 1131-119738-61-119791-6 4.57 ACTION PIN Contact Mounting2.9003.2343.104.475 301-119216-6— Hole Specifications—page 11473.6682.1478.8412.07 .702Application Tooling—page 1151-119163-6— 17.83 Contact Replacement Tools— 3.0003.3343.204.180 311-119738-7—page 11576.2084.6881.384.57 Special Application—page 963.1003.4343.304.180 321-650122-8— 78.7487.2283.924.57 .180 —2-119791-0 4.573.3003.6343.504Technical Documents:34 83.8292.3088.90.475 (pages 186, 187):2-119216-0— 12.06 Product Specifications3.4003.7343.604.475 352-119216-1— 86.3694.8491.5412.06108-14019, 108-26003 .180 Application Specification2-119738-2— 4.573.5003.8343.704 114-260023688.9097.3894.08.475 2-119216-2— Instruction Sheets 408-2933,12.06 408-2978, 408-2979, 408-9058,3.6003.9343.804.180 372-650122-3— 91.4499.9296.624.57408-9067, 408-9091, 408-9186 .180 2-119738-6— 4.573.9004.2344.104 40 99.06107.54104.24.475 2-119216-6— 12.06 4.2004.5344.404.180 432-650122-9— 106.68115.16111.864.57 4.3004.6344.504.475 443-119216-0— 109.22117.70114.4012.07 .180 3-119738-63-119791-6 4.57 4.9005.2345.104.475503-119216-6— 124.46132.94129.6412.07 .702 —3-119726-6 17.83 5.4005.7345.604.180 554-119738-14-650124-1 137.16145.54142.344.57 .180 4-119738-6— 4.575.9006.2346.104 60 149.86158.34155.04.702 119677-1— 17.83 Note:Other connector sizes can be made available, consult Tyco Electronics. 103 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connectors, .125 x .125 [3.18 x 3.18] Centerline Material and Finish: Housing with High Card Scoops Housing—Black glass-filled polyester, 94V-0 rated 28 Dual Positions Contacts—Phosphor bronze, plated Part Number 1-119853-4 gold .000030 [0.00076] min. thk. over .000050 [0.00127] min. thk. palladium- nickel in contact area, .000100.420.364 [0.00254] min. tin-lead on posts, with[10.67].125[9.24] 3.755[3.18]entire contact underplated .000050 [95.38] [0.00127] min. nickel Contact Tip Alignment Strip—Clear.515 [13.08]polyester, type D±.0063.625 Card Slot±0.15.005/.007[92.08] .040Depth[0.13/0.18]Min. Note:Full palladium-nickel plated[1.02] posts and other platings and platingContact See E BelowFinish Areathicknesses can be made available. .702 Related Product Data:[17.83] .025Post LengthSq. Performance Specifications—[0.64] and Finish Area Postpage 98 AcceptsAccessories—page 112 .054 to .071.125Contact Tip PC Board Edge Pattern—page 113[1.37 to 1.80][3.18]Alignment Strip PC Boardsand .702[17.83]ACTION PIN Contact Mounting Post Length3.375Hole Specifications—page 114 [85.72] Application Tooling—page 115 Contact Replacement Tools— .125 page 115 [3.18] Special Application—page 96 Technical Documents: (pages 186, 187): Product Specifications 108-14019, 108-26003 Application Specification 114-26002 Instruction Sheets 408-6727, 408-9186 .135 [3.43] Detail E Keying Plugs Intercontact (Plastic)On-Contact (Plastic) Part No. 118982-1Part No. 119802-2 104 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Solder Type, Board-to-Board) AMP PACE Connector Specials, .125 x .125 [3.18 x 3.18] Centerline 27 Dual Positions Tin-Lead Posts .634 [16.10] Long Part No. 645394-1 18 or 36 Dual Positions Tin-Lead Posts .740 [18.80] Long Part No. 119552-2 Tin-Lead Posts .180 [4.57] Long Part No. 119880-1 97 Dual Positions (Two-piece Closed End/Open End with Partial Card Scoops and Card Guides) Contact Tyco Electronics for specific Part Number infor- mation. 105 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .125 x .250 [3.18 x 6.35] Centerline Standard Housing .125 .364 [3.18].410[9.24] [10.41] B ±.006.415 C[±0.15][10.54] .005/.007Card Slot.545 [0.13/0.18]Depth.040[13.84] Min. [1.02] Contact See E BelowFinish Area .702 [17.83] .025Post LengthSq. [0.64] and Finish AreaContact Tip.093PostAcceptsMin.Alignment Strip[2.36] .054 to .071on .500[12.07] [1.37 to 1.80]and .702[17.83] PC Boards.250Post Lengths [6.35]A .125 [3.18] Housing with High Card .125 Scoops[3.18].420.364 [10.67][9.24]B .515±.006 C[±0.15][13.08] Card Slot.645.005/.007 .040Depth[16.38][0.13/0.18]Min. [1.02] Contact Finish AreaSee E Below .702 [17.83] .025 Post LengthSq. [0.64] and Finish Area.093AcceptsPostMin. [2.36] .054 to .071Contact Tip [1.37 to 1.80]Alignment Strip PC Boardson .500[12.07].250 and .702[17.83][6.35] 3.375Post Lengths [85.72] .125 [3.18] Keying Plugs .125Typical Closed End/ [3.18] Open End Housings Intercontact (Plastic) Part No. 118982-1 Connectors can be mounted in pairs using .135 any size combinations. [3.43] On-Contact (Plastic) Example: Detail EPart No. 119802-21-30 pos. + 1-60 pos. = 1-90 pos. 106 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .125 x .250 [3.18 x 6.35] Centerline (Continued) Material and Finish:No. ofDimensionsClosed End/Closed EndClosed End/Open EndPost Dual LengthHousing—Black glass-filled polyester,ABCStandardHigh ScoopHigh ScoopPositions 94V-0 rated 2.1252.3732.505.180 181-119822-4—3-119840-2 53.9860.2763.634.57Contacts—Phosphor bronze, plated gold .000030 [0.00076] min. thk. over.180 1-119822-8—— 4.57.000050 [0.00127] min. thk. nickel in 2.6253.0052.875.500contact area, .000100 [0.00254] min.221-119200-8—— 66.6876.3373.0212.70 tin-lead on posts, with entire contact .702 underplated .000050 [0.00127] min.1-119202-8—— 17.83 nickel 3.0003.3803.250.180 251-119822-1—— Contact Tip Alignment Strip—Clear76.2085.8582.554.57 polyester, type D3.2503.6303.500.702 271-119202-3—— 82.5592.2088.9017.83 .180Note:Full palladium-nickel plated 1-119822-4—— 4.57posts and other platings and plating3.3753.7553.625 28 85.7295.3892.08thicknesses can be made available..500 1-119200-4—— 12.70 .180 1-119822-61-678034-1— 4.57Related Product Data:3.6254.0053.875 30 92.08101.7398.24.500 —1-119841-6—Performance Specifications—12.70 page 98.180 2-119822-21-678034-2— 4.57Accessories—page 1124.3754.7554.625 36 111.82120.78117.48.500 PC Board Edge Pattern—page 113—2-119841-2— 12.70 ACTION PIN Contact Mounting4.6254.8735.005.180 382-119822-4—3-119840-9 Hole Specifications—page 114117.47123.77127.134.57 .180Application Tooling—page 1152-119822-6—— 4.574.8755.2555.125 Contact Replacement Tools—40 123.83133.48130.18.702 2-119200-6——page 11517.83 Special Application—page 966.1256.5056.375.180 503-119822-6—— 155.58165.23161.934.57 6.2506.6306.500.500 513-119200-7—— 158.75168.40165.1012.70 Technical Documents: 7.3757.7557.625.180 (pages 186, 187):604-119822-6—— 187.33196.98193.684.57 Product SpecificationsNote:Other connector sizes can be made available, consult Tyco Electronics. 108-14019, 108-26003 Application Specification 114-26002 Instruction Sheets 408-2933, 408-2978, 408-2979, 408-9063, 408-9091, 408-9119, 408-9186 107 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .125 x .250 [3.18 x 6.35] Centerline w/ Make Before Break Contacts Standard Housing .125 .364 [3.18].410[9.24] [10.41] B ±.006.415 C[±0.15][10.54] .005/.007Card Slot.545 [0.13/0.18]Depth.040[13.84] Min. [1.02] Contact See E BelowFinish Area .702 [17.83] .025Post LengthSq. [0.64] and Finish AreaContact Tip.093PostAcceptsMin.Alignment Strip[2.36] .054 to .071on .500[12.07] [1.37 to 1.80]and .702[17.83] PC Boards.250Post Lengths [6.35]A .125 [3.18] Housing with High Card .125 Scoops[3.18].420.364 [10.67][9.24]B .515 ±.006 C[13.08][±0.15] .005/.007Card Slot .040.645 [0.13/0.18]DepthMin. [1.02] [16.38] Contact See E BelowFinish Area .702 [17.83] Post Length.025 Sq. and Finish Area[0.64] .093 Min.PostAccepts[2.36] .054 to .071Contact Tip [1.37 to 1.80]Alignment Strip .250 PC Boardson .500[12.07] [6.35] and .702[17.83] 3.375Post Lengths [85.72] .125 [3.18] Keying Plugs .125Typical Closed End/ [3.18] Open End Housings Intercontact (Plastic) Part No. 118982-1 Connectors can be mounted in pairs using .135 any size combinations. [3.43] On-Contact (Plastic) Example: Detail EPart No. 119802-21-30 pos. + 1-60 pos. = 1-90 pos. 108 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .125 x .250 [3.18 x 6.35] Centerline w/ Make Before Break Contacts (Continued) Material and Finish:No. ofDimensionsClosed End/Closed EndClosed End/Open EndPost Dual LengthHousing—Black glass-filled polyester,ABCStandardHigh ScoopPositions 94V-0 rated 2.1252.5052.373.180 181-1571235-1— 53.9863.6360.274.57Contacts—Phosphor bronze, plated 2.8753.1233.058.180gold .000030 [0.00076] min. thk. over 24—650059-2 76.2079.2577.674.57 .000050 [0.00127] min. thk. nickel in Note:Other connector sizes can be made available, consult Tyco Electronics.contact area, .000100 [0.00254] min. tin-lead on posts, with entire contact underplated .000050 [0.00127] min. nickel Contact Tip Alignment Strip—Clear polyester, type D Note:Full palladium-nickel plated posts and other platings and plating thicknesses can be made available. Related Product Data: Performance Specifications— page 98 Accessories—page 112 PC Board Edge Pattern—page 113 ACTION PIN Contact Mounting Hole Specifications—page 114 Application Tooling—page 115 Contact Replacement Tools— page 115 Special Application—page 96 Technical Documents: (pages 186, 187): Product Specifications 108-14019, 108-26003 Application Specification 114-26002 Instruction Sheets 408-2933, 408-2978, 408-2979, 408-9063, 408-9091, 408-9119, 408-9186 109 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .156 x .200 [3.96 x 5.08] Centerline Material and Finish: Standard Housing Housing—Black glass-filled polyester, .364.15694V-0 rated.360[9.24][3.96] [9.14]Contacts—Phosphor bronze, plated gold .000030 [0.00076] min. thk. overB .000050 [0.00127] min. thk. nickel in contact area, .000100 [0.00254] min..415 ±.006 C[10.54]tin-lead on posts, with entire contact[±0.15] .005/.007Card Slot.545 underplated .000050 [0.00127] min. [0.13/0.18]Depth.040[13.84] Min.nickel[1.02] Contact Contact Tip Alignment Strip—ClearFinish AreaSee E Below polyester, type D Post LengthNote:Full palladium-nickel plated andposts and other platings and plating.025 Sq.Finish Area thicknesses can be made available.[0.64] .093 PostMin. [2.36] Accepts .054 to .071 Related Product Data:[1.37 to 1.80].200 PC BoardsContact Tip[5.08] Performance Specifications—AAlignment Strip page 98on .475[12.07] and .702[17.83] Accessories—page 112 Post Lengths .156 PC Board Edge Pattern—page 113 [3.96] ACTION PIN Contact Mounting Hole Specifications—page 114 Application Tooling—page 115 Contact Replacement Tools— page 115 Keying Plugs Special Application—page 96 Technical Documents: (pages 186, 187): Product Specifications 108-14019, 108-26003 Intercontact (Plastic)On-Contact (Plastic) .135 Application SpecificationPart No. 118982-1Part No. 119802-2 [3.43] 114-26002 Detail E Instruction Sheets 408-6726, No. of408-9186DimensionsClosed End/Closed EndPost Dual LengthABCStandardPositions .180 1-119790-1 4.57 2.1842.6262.495.475 151-119254-1 55.4766.7063.3912.07 .702 1-119256-1 17.83 2.6523.0942.964.475 181-119254-4 67.3678.5975.2912.07 .180 1-119790-8 4.57 3.2763.7183.588.475221-119254-8 83.2194.4491.1312.07 .702 1-119256-8 17.83 .180 1-119790-4 4.57 4.2124.6544.524.475 281-119254-4 106.98118.21114.9112.07 .702 1-119256-4 17.83 .180 2-119790-9 4.57 6.5526.9946.864.475432-119254-9 166.42177.65174.3512.07 .702 2-119256-9 17.83 Note:Other connector sizes can be made available, consult Tyco Electronics. 110 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors, .156 x .200 [3.96 x 5.08] Centerline w/Make Before Break Contacts Material and Finish: Card Scoop Housing Housing—Black glass-filled polyester, 94V-0 rated .156Contacts—Phosphor bronze, plated.364.228 [3.96][9.25][5.78]gold flash over .000030 [0.00076] min. Bthk. over .000050 [0.00127] min. thk. .045nickel in contact area, .000100Contact Area [1.14] C [0.00254] min. tin-lead on posts, with entire contact underplated .000050 [0.00127] min. nickel .116 Contact AreaContact Tip Alignment Strip—Clear [2.95] polyester, type D Note:Full palladium-nickel plated posts and other platings and plating.200.005/.007 [5.08]thicknesses can be made available.[0.13/0.18].093 Min. [2.36] Accepts .054 to .071 [1.37 to 1.80]Related Product Data: PC Boards Performance Specifications— page 98 AAccessories—page 112 PC Board Edge Pattern—page 113 ACTION PIN Contact Mounting.156 Hole Specifications—page 114[3.96] Application Tooling—page 115 Contact Replacement Tools— page 115 Special Application—page 96 Keying Plugs Technical Documents: (pages 186, 187): Product Specifications 108-14019, 108-26003 Application Specification 114-26002 Intercontact (Plastic)On-Contact (Plastic)Instruction Sheets 408-6726,.135 Part No. 118982-1Part No. 119802-2 408-9186[3.43] Detail E No. ofDimensionsClosed End/Closed EndPost Dual LengthABCScoopPositions 2.6523.0942.964.180 18678035-1 67.3678.5975.294.57 Note:Other connector sizes can be made available, consult Tyco Electronics. 111 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) Accessories for AMP PACE Connectors Connector Card Guide Material: Black glass-filled polyester Hole for #4 Self-Tapping Screw (mandatory)Related Product Data: .050[12.7] Deep.370 Mates with all standard housings (will[9.4] not mate with some special housings) L Technical Documents: .410(pages 186, 187):.220 [10.41] [5.59] Instruction Sheet 408-9091 .152BDimension fromDia. [3.96] AMPPACEConnector (2 Holes)Tables Plus .310 [7.87] 1LPart Numbers 2.500 1-117169-363.50 6.000 1-117169-3 152.40 1Other lengths up to 6.0[152.4] can be for details. Ground Module Accepts Rating:.054 to.071 [1.37 to 1.80] 20 amperes per contact—Copper or PC Board aluminum bus .420 [10.67]Material and Finish: Housing—Black glass-reinforced thermoplastic .455 [11.56]Contact—CA 195, 3/4 hard, plated .000050 [0.00127] gold in contact area (front face only); .000100 [0.00254] tin- lead on post, with entire contact under- plated .000050 [0.00127] nickel.700 .060[17.78] [1.52] Contact Related Product Data:Area Mates with all standard housings (will .250 not mate with some special housings)[6.35] .300 [7.62] Technical Documents: (pages 186, 187): Part No. 119341-1 Instruction Sheet 408-2978Seating Tool 59881-1 112 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 E l e c t r o n i c s made available. Consult Tyco Card Edge Connectors (Press-Fit Board-To-Board) PC Board Layout for AMP PACE Connectors GoldRecommended Fingers PC Board Edge Pattern +.020 .040-.010 +.508 [1.016]-.254 .430 30°.275[10.92] [6.99] .050 B.054-.071 [1.27] ±.005[1.37-1.80] Max. ChamferC[±0.13]±.002.052 ±0.05[1.32] Key Slot 1A 1A Max. = Minimum connector card slot -.001 [-0.03]. A Min. = Minimum connector card slot -.011 [-0.28]. Note:Finger pattern to be centered on daughter card. Each finger can deviate .003 [0.08] from true position. DimensionsAMP PACE Connector Centerline SpacingBC .100 x .100.100.070 2.54 x 2.542.541.78 .100 x .200.100.070 2.54 x 5.082.541.78 .125 x .125.125.080 3.18 x 3.183.182.03 .125 x .250.125.080 3.18 x 6.353.182.03 .156 x .200.156.080 3.96 x 5.083.962.03 113 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) AMP PACE Connectors (Continued) AMP ACTION PIN Press-Fit Contacts ACTION PIN contacts provide a reliable press-fit connection. Localized pressure in the interface area entails oxide break-through and helps prevent corrosion in the harshest environments to provide a reliable connection virtually every time. Also, radial and axial distortion are controlled to meet today’s standards for multilayer board applications. PC Board Thickness ACTION PIN contacts are designed for use in a variety of PC board thicknesses. However, certain ACTION PIN contacts are to be used in specific ranges of board thicknesses. To promote optimum performance, the recommended board thick- nesses provided with the con- nector being used must be Annular Ring (See Note)� followed. Drilled Hole` Copper Thickness´ Tin-Lead Thicknessˆ Plated Through-Hole˜ Mounting Hole Specifications ConnectorACTION PIN ContactPlatedPlating ThicknessesRadial Hole DistortionDrilled Hole MaterialThrough-HoleNo. of DualDiameter`CenterlineCopper´*Tin-LeadˆAverageMaximumThicknessDiameter˜Positions .125 x .125 28, 97.00033.18 x 3.18±.001.025.0453.001-.003.037-.043NotNot 0.008±0.030.641.1510.03-0.080.94-1.09SpecifiedSpecified.156 x .200 Min.15-43 3.96 x 5.08 .0003±.001.125 x .125.025.0465.001-.003.037-.043NotNot 270.008±0.033.18 x 3.180.641.1810.03-0.080.94-1.09SpecifiedSpecified Min. .100 x .100 15-60 2.54 x 2.54 .100 x .200 15-60.0003 2.54 x 5.08±.001.025.0453.001-.003.037-.043.0015.002 0.008 ±0.030.641.1510.03-0.080.94-1.090.0380.05.125 x .125Min.18, 36 3.18 x 3.18 .125 x .250 18-60 3.18 x 6.35 *Maximum hardness of copper layer is 150 Knoop. Note:Recommended annular ring diameter is hole diameter plus .020[0.51]. 114 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) Application Tooling for AMP PACE Connectors Modular Seating Tools Available from Tyco Electronics is a complete series of AMP PACE Modular Seating Tools for installing AMP PACE Connectors on printed circuit boards and panels. These tools are modular in design in that housing tool holders may .100 x .100 [2.54 x 2.54].100 x .200 [2.54 x 5.08],.156 x .200 [3.96 x 5.08] be added or subtracted toCenterline Spacing.125 x .125 [3.18 x 3.18],Centerline Spacing .125 x .250 [3.18 x 6.35],accommodate several dif- For Connectors without Scoops ferent connector sizes. In CenterlineNo. ofaddition, all tool parts are Dual.100 x .100.100 x .200.125 x .250.156 x .200 individually replaceablePositions[2.54 x 2.54][2.54 x 5.08][3.18 x 6.35][3.96 x 5.08] should the tool become 151-58200-11-58140-1—1-58143-1 damaged. 18—1-58140-41-58142-4— 201-58200-61-58140-6——Modular seating tools are 22—1-58140-81-58142-81-58143-8supplied in two basic 251-58200-11-58140-11-58142-1— designs: One which covers 281-58200-41-58140-41-58142-41-58143-4 all connector centerlines 301-58200-61-58140-61-58142-6— except .100 x .100 [2.54 x 311-58200-7——— 2.54] and one for the .100 x 32—1-58140-8—— .100 [2.54 x 2.54] centerline 34—2-58140-0—— connectors. 352-58200-12-58140-1—— All seating tools have a36—2-58140-22-58142-2— 37—2-58140-3——common shut height of 402-58200-62-58140-62-58142-6—1.5 inches [38]. This 43—2-58140-9—2-58143-9allows AMP PACE and other 44—3-58140-0——ACTION PIN products to be 483-58200-4——— seated at the same time on 503-58200-63-58140-63-58142-6— AMP seating machines. See 513-58200-7—3-58142-7— page 149 for a description 544-58200-0——— of the AMP seating 554-58200-14-58140-1—— machines. 56——4-58142-2— 604-58200-64-58140-64-58142-6— For Connectors with Scoops CenterlineNo. of Dual.100 x .200.125 x .125.125 x .250 Positions[2.54 x 5.08][3.18 x 3.18][3.18 x 6.35] 151-58150-1—— 18——1-58184-4 221-58150-8—— 28—1-58218-4— 301-58150-6—— 38——2-58184-4 503-58150-6—3-58184-6 554-58150-1—— Contact ReplacementHousing Style Centerline ToolsStandardFull Card Scoop .100 x .100 Replacement tools listed in266220-3— 2.54 x 2.54 the chart at the right are .100 x .200 266220-158210-1 used to install replacement2.54 x 5.08 contacts in AMP PACE con-.125 x .125 —58210-4Note:Tooling availability is 3.18 x 3.18 nector housings. Replace-dependent upon part number .125 x .250 activity. Consult Tycoment Tool 1-265871-7 is266220-258210-2 3.18 x 6.35 Electronics for further used to remove all .025 .156 x .200information.266220-2— [0.64] square posts from3.96 x 5.08 PC boards. 115 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) TELEDENSITY Connectors Product Facts nHigh density - .0625 [1.586] contact centerlines nCompliant ACTION PIN contacts press-fit into plated-through holes for solderless application nIndividually replaceable contacts nAccommodates up to three levels of daughter card pads for sequencing n.125 [3.18] square grid post arrangement Performance Specifications Current Rating*: 3 amperes max. The high performance AMP contacts are plated with 30 pads for sequencing, while Mating Force (Contact Pair): TELEDENSITY connector is microinches of gold in the a biasing wedge maintains 1 lb. [4.4 N] max. a high density, card edge, mating area and tin-lead on proper pad alignment dur- Durability (Mating Cycles): telecommunications con- the posts. A plastic locating ing card extraction. Posts 100 min. nector. It features compliant strip keeps posts positioned are arranged in a .125 Termination Resistance: ACTION PIN contacts for correctly for board insertion. [3.18] square grid to ease 12 milliohms max. solderless application to circuit routing. For high-density needs, Dielectric Rating: multi-layer printed circuit TELEDENSITY connectors 1200 VAC (rms) boards with plated-through offer a .0625 [1.586] daugh- Insulation Resistance: or bare copper holes. ter card contact centerline 5000 megohms max. These connectors accept spacing in 39-, 71-, or 99- Operating Temperature: .054 to .072 [1.37 to 1.83] dual positions. The connec- –55°C to +85°C thick daughter cards. To tor’s .330 [8.38] slot depth satisfy the broadest range accommodates up to three of application needs, the levels of daughter card *Consult Tyco Electronics when paralleling contacts for power applications. 116 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) TELEDENSITY Connectors, .0625 [1.586] Centerline Material and Finish: Housing—Black polyester Contacts—Copper alloy 725, plated .000030 [0.00076] gold in contact area, .000030 [0.00076] solder plate on post, with entire contact underplated .000100 [0.00254] nickel Coil Spring—Stainless steel Contact Tip Alignment Strip—Clear polyester Related Product Data: Performance Specifications— page 116 ACTION PIN Contact Mounting Hole Specifications—page 118 Technical Document—pages 186, 187 Product Specification— 108-26003 Instruction Sheet— 408 6866 Number ofConnectorSeating Dimensions DualPartTool ABCD PositionsNumbersNumbers** .634 650148-1 16.103.1682.588-2.6002.375 3958084-1 80.4765.74-66.0460.33.350 650281-1* 8.89 5.1684.588-4.600.6344.375 71650149-158084-3 131.27116.54-116.8416.10111.13 6.9186.338-6.350.6346.125 99650150-158084-2 175.72160.99-161.2916.10155.58 * Contacts in this connector are underplated .000150 [0.00381] nickel. ** See page 149 for a description of AMP seating machines. Recommended PC Board LayoutFor mounting hole specifications, see page 123 (Shown from post side) Note:ACTION PIN posts require .093 [2.36] min. thick PC board. 117 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) TELEDENSITY Connectors (Continued) AMP ACTION PIN Press-Fit Contacts ACTION PIN contacts provide a reliable press-fit connection. Localized pressure in the interface area entails oxide breakthrough and helps prevent corrosion in the harshest environments to provide a reliable connection virtually every time. Also, radial and axial distortion are controlled to meet today’s standards for multilayer board applications. PC Board Thickness ACTION PIN contacts are designed for use in a variety of PC board thicknesses. However, certain ACTION PIN contacts are to be used in specific ranges of board thicknesses. To promote optimum performance, the recommended board thick- nesses provided with the con- Annular Ring (See Note)� nector being used must be followed.Drilled Hole` Copper Thickness´ Tin-Lead Thicknessˆ Plated Through-Hole˜ Mounting Hole Specifications N IPNOTAICsessenkch niTgitalPonitotri eosDlHlad iRa lHdeeo liDlr ˆ`´*˜sseinkch iTlaretaM .0003 118 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 [ 0 . 5 1 ]. 0 2 0Recommended annular ring diameter is hole diameter plus N o t e : *Maximum hardness of copper layer is 150 Knoop 0 . 0 50 . 0 3 80 . 9 4 - 1 . 0 90 . 0 0 80 . 0 3 - 0 . 0 81 . 1 5 1 ± 0 . 0 30 . 6 4 M i n . . 0 0 2. 0 0 1 5. 0 3 7 - . 0 4 3. 0 0 1 - . 0 0 3. 0 4 5 3 ± . 0 0 1. 0 2 5 D i a m e t e r M a x i m u mA v e r a g eT i n - L e a dC o p p e rD i a m e t e r H o l eC o n t a c t P l a t e d - T h r o u g h Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Connectors Performance Specifications Electrical Characteristics Contact Resistance: 8 milliohms (max.) Insulation Resistance: 2,000 megohms (min.) Continuous Current Rating*: 3 amperes Physical Characteristics Card Insertion Force: 16 oz [4.45 N] (max.) per contact pair Card Extraction Force: 1 oz [0.28 N] (min.) per contact pair Retention (in PC Board): 7 lb [31.1 N] (min.) Operating Temperature: –65°C to +125°C AMP ECONOMATE Contacts from Tyco Important: Connectors provide a Electronics feature the Application tooling is reliable and economical proven and reliable absolutely necessary for method for interconnecting ACTION PIN contact installing contacts and backplane panels, using design.These press-fit con- housings onto PC boards. either two-sided or multi- tacts employ two spring See page 126 for applica- layer PC boards. members that compress to tion tooling. exert force against the Connector housings are fur- plated through-holes for a nished unloaded and are gas-tight connection. available for post centerline Gold plating of contacts spacings of: .100 x .200 promotes the electrical [2.54 x 5.08] and .156 x .200 integrity of the connection. [3.96 x 5.08]. The housings are simply positioned onto Feed-through posts are also the contacts, after the con- available for accepting tacts have been inserted wrap-type terminations. into the PC board and the These posts also feature the carrier strip removed. ACTION PIN contact design and are supplied in strip form and stored on reels for insertion into PC boards. *Consult Tyco Electronicsengi- neering when paralleling con- tacts for power applications. 119 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Connectors (Continued) .100 x .200 [2.54 x 5.08] Centerline Spacing B (Card Slot No. ofHousingADimensionsLength) Material and Finish:DualPart ABPositionsNumbers Housing—Black glass-filled nylon 2.7342.604 251-117798-4 Contacts—Copper alloy 725, plated as82.1478.84 follows:3.2343.104 301-117798-3 82.1478.84Plating A—Selectively plated .000030Accepts .054-.0713.7343.604[0.00076] min. gold in contact area, 351-117798-6 [1.37-1.80]94.8491.54 .000001 [0.00003] min. gold on remain- PC Boards 3.8343.704der of contact, with entire contact under-361-117798-7 97.3894.08 plated .000050 [0.00127] min. nickel 4.2344.104 Plating B—Duplex plated .000030401-117798-8 107.54104.24 [0.00076] min. gold in contact area, 5.2345.104 501-117798-1.000100 [0.00254] min. tin-lead on132.94129.64 posts, with entire contact underplated6.2346.104 601-117798-2 .000050 [0.00127] min. nickel158.34155.04 Plating C—Selectively plated .000100Note:Other connector sizes can be made available, [0.00254] min. gold in contact area,consult Tyco Electronics. .000001 [0.00003] min. gold on remain- der of contact, except .000050 [0.00127] min. gold for .200 [5.08] from tip of post, with entire contact underplated .000050 [0.00127] min. nickel .415 .545[10.54] .181[13.84] [4.60]Related Product Data: Performance Specifications— page 119Contact Area Card Guides—page 122L.093-.125 [2.36-3.18] ACTION PIN Contact Mounting Hole Specifications—page 125 Application Tooling—page 126 .200 [5.08] .025 Sq.Technical Documents:[0.64] (pages 186, 187): Product Specification 108-26002.100 [2.54] Contact Part Numbers*Dimension LPlating APlating BPlating C Keying Plugs .475 2-117795-44-117795-0— Make-Before-Break Contacts12.07 .702 1-117795-32-117795-64-117795-8 17.83 *Contacts are strip form, 35,000 per reel. Intercontact (Plastic) Part No. 118982-1 Make Before Break Contact Part Numbers*Dimension LPlating APlating B .475 —4-118951-8 12.07 .040.702Ref.1-118951-4—[1.02] 17.83 Gold in Contact Area.025 Sq. [0.64] On-Contact (Plastic) Part No. 119802-2 .100 [2.54] 120 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 [ 2 . 5 4 ] . 1 0 0 Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Connectors (Continued) 3.588 [91.14] .156 x .200 [3.96 x 5.08] (Card Slot Centerline SpacingLength) 3.718 [94.44] Material and Finish: Housing—Black glass-filled nylon Contacts—Copper alloy 725, plated as follows: Plating A—Selectively plated .000030Accepts .702.054-.071[0.00076] min. gold in contact area, [17.83][1.37-1.80] .000001 [0.00003] min. gold on remain- PC Boards der of contact, with entire contact under-.150 Ref. [3.01] plated .000050 [0.00127] min. nickel Gold in Plating B—Duplex plated .000030 Contact [0.00076] min. gold in contact area,Area.025 Sq. .000100 [0.00254] min. tin-lead on[0.64] 22 Dual Position Housing posts, with entire contact underplatedPart No. 117296-4 .000050 [0.00127] min. nickel .150 [3.06] Related Product Data:Make-Before-Break Contacts Performance Specifications— page 119 Card Guides—page 122 ACTION PIN Contact Mounting Hole Specifications—page 125 Application Tooling—page 126 Technical Documents: (pages 186, 187): .415Product Specification [10.54] 108-26002.181.545 [4.60][13.84] Keying Plug Contact AreaL.093-.125 [2.36-3.18] .200 [5.08] .025 Sq. [0.64] Note:Other connector sizes can be made available, Intercontact (Plastic) consult Tyco Electronics. Part No. 118982-1 .156 [3.96] Make Before Break Contacts DimensionPart Plating LNumbers* .475 B1-118778-2 12.07 .702 A118778-6 17.83 DimensionContact LPart Numbers* .475 117285-7 12.07 .702 117285-8 17.83 *Contacts are strip form, 15,000 per reel. 121 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 [ 3 . 9 6 ] . 1 5 6 Card Edge Connectors (Press-Fit Board-To-Board) Card Guides for ECONOMATE Connectors Material: Black glass-filled nylon Related Product Data: Mates with all .100 x .200 [2.54 x 5.08] and .156 x .200 [3.96 x 5.08] centerline housings Technical Documents: (pages 186, 187): Instruction Sheet 408-9091 Hole for No. 4 Screw 0.45L deep.220[11.43] [5.59] .410 [10.41] .152 Dia. [3.86] (2 Plcs.) 1A Recommended Mounting Dimensions DimensionCard Guide L*Part Numbers 2.500 1-117169-3 63.50 6.000 1-117169-3 152.40 *Other lengths can be made avail- able in .500 [12.70] increments from 1.500 [38.10] to 6.500 [165.10]. Consult Tyco Electronics for details. Housing Dimension CenterlineNo. of Dual1A SpacingPositions 3.544 30 90.02 4.044 35 102.72 4.144 36 105.26.100 x .200 2.54 x 5.084.544 40 115.42 5.544 50 140.82 6.544 60 166.22 .156 x .2004.028 22 3.96 x 5.08102.31 1Note: Adimension = Adimension of ECONOMATE housing plus .310 [7.87]. 122 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Center Carrier Feed-Thru Posts* .100 [2.54] Centerline, serb muNPtar Wrap Type Material:ABCnickel plate Copper Alloy 725 Finish – Gold plate per MIL-G-45204 nickel plate over nickel plate per QQ-N-290 (see table for thicknesses)— Recommended Hole Size: .001 Non-Plated-thru Hole - .0453± 0.03 [1.15± ], 1.15 mm drill .004 0.1 Plated-thru Hole - .039 ± [0.99 ± ], .003 0.08 1.15 mm drill— .100 [2.54] Centerline, TERMI-POINT Clip Part Number 119136-2 Material: Copper Alloy 725 Finish – 1) Gold plate per MIL-G-45204, .000030 [0.00076] min. thk. over nickel plate per QQ-N-290, .000050 [0.0013] min. thk. 2) Gold flash per MIL-G-45204, .000001 [0.00003] min. thk. over nickel plate per QQ-N-290, .000050 [0.0013] min. thk. Recommended Hole Size: .001 Non Plated-thru Hole - .0453± 0.03 [1.15± ], 1.15 mm drill .004 0.1 Plated-thru Hole - .039± [0.99± ], .003 0.08 1.15 mm drill .125 [3.18] Centerline, Wrap Type Material: Copper Alloy 725 DimensionsPart Numbers Finish – Gold plate per MIL-G-45204 or .000100 [0.0025] min..000030 [0.00076] solder plate over nickel plate per ABtin plate overgold plate over QQ-N-290 (see table for thicknesses).000050 [0.0013] min..000050 [0.0013] nickel platenickel plate .703.548 117311-71-117311-0Recommended Hole Size:17.6813.92 .001 Non Plated-thru Hole - .0453±*Use AMP Cut and Transfer Machine for center carrier post insertion. Consult 0.03Tyco Electronics.[1.15± ], 1.15 mm drill .004 0.1 Plated-Thru Hole - .039 ± [0.99± ], .003 0.08 1.15 mm drill 123 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 3 0 . 5 62 0 . 9 09 . 6 5 1 . 2 0 3. 8 2 3. 3 8 0 2 8 . 6 51 3 . 9 71 4 . 6 8 1 - 1 1 8 2 4 3 - 1 1 . 1 2 8. 5 5 0. 5 7 8 2 6 . 3 71 1 . 6 81 4 . 6 8 1 1 8 2 4 3 - 8 1 . 0 3 8. 4 6 0. 5 7 8 2 5 . 5 31 7 . 4 58 . 0 8 1 . 0 0 5. 6 8 7. 3 1 8 .000050 [0.0013] min. gold plate over 2) .000050 [0.0013] min. .000050 [0.0013] min. gold flash over 1) .000001 [0.00003] min. D i m e n s i o n s Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Connectors (Continued) .100 [2.54] Centerline Spacing Feed-Through Posts Material and Finish: Copper alloy 725, plated as follows: Plating A—Selectively plated .000030 [0.00076] min. gold in Area (1), .000001 [0.00003] min. gold in Area (2), with entire post underplated .000050 .318[0.00127] min. nickel(1) [8.08] Plating B—.000030 [0.00076] min. .045gold over .000100 [0.00254] min. nickel [1.14] on entire post Plating C—.000050 [0.00127] min. gold over .000100 [0.00254] min. nickel on entire post .030Plating D—.000100 [0.00254] min. [0.76] tin-lead over .000050 [0.00127] min. (2) nickel on entire post A Pre-Notch .025 .100.025[0.64] [2.54][0.64] Feed-Through Post Part Numbers*Dimension APlating APlating BPlating CPlating D .6871-117249-7 1-117249-21-117249-26-117249-51117.453-117249-1 .500 3-117249-2——5-117249-6 12.70 *Posts in strip form, 50,000 per reel. 1Pre-notched to break with 120° bend. .150 [3.81] Centerline Spacing Material and Finish: Copper alloy 725, selectively plated .000030 [0.00076] min. gold in Area (1), .000001 [0.00003] min. gold in Area (2), with entire post underplated .000050 [0.00127] min. nickel .318(1) [8.08] .045 [1.14] .030 [0.76] (2) .687 [17.45] .025 .150.025[0.64] [3.81][0.64] 50,000 per reel Part No. 117269-5 124 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) ECONOMATE Connectors (Continued) AMP ACTION PIN Press-Fit Contacts ACTION PIN contacts provide a reliable press-fit connection. Localized pressure in the interface area entails oxide break-through and helps prevent corrosion in the harshest environments to provide a reliable connection virtually every time. Also, radial and axial distortion are controlled to meet today’s standards for multilayer board applications. PC Board Thickness ACTION PIN contacts are designed for use in a variety of PC board thicknesses. However, certain ACTION PIN contacts are to be used in specific ranges of board thicknesses. To promote optimum performance, the recommended board thick- nesses provided with the con- Annular Ring (See Note)� nector being used must be followed.Drilled Hole` Copper Thickness´ Tin-Lead Thicknessˆ Plated Through-Hole˜ Mounting Hole Specifications ConnectorACTION PIN ContactPlatedPlating ThicknessesRadial Hole DistortionDrilled Hole MaterialThrough-HoleNo. of DualDiameter`CenterlineCopper´*Tin-LeadˆAverageMaximumThicknessDiameter˜Positions .100 x .20030, 35, 36, .00032.54 x 5.0840, 50, 60±.001.025.0453.001-.003.037-.043NotNot 0.008±0.030.641.1510.03-0.080.94-1.09SpecifiedSpecified.156 x .200 Min.22 3.96 x 5.08 *Maximum hardness of copper layer is 150 Knoop. Note:Recommended annular ring diameter is hole diameter plus .020[0.51]. 125 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) Application Tooling for ECONOMATE Connectors housings and contacts from Available from Tyco housings are presented on the printed circuit boards. Electronics is a complete the respective product All tools are available in kits, series of ACTION PIN specification pages. For or may be purchased Assembly Tooling Kits for specific dash numbers and individually. ECONOMATE connector complete information on housings and feed-through the tooling, contact In many instances, part posts. Assembly Kit tools Tyco Electronics. number series are listed in provide the means for the charts. Specific dash installing housings and con- numbers and detailed infor- tacts onto printed circuit mation on the contacts and boards, as well as removing For ECONOMATE Connectors ACTION PIN ContactsECONOMATE Housings ACTION PIN Assembly PinPartNo. of DualPartCenterlineTool Numbers LengthNumbersPositionsNumbers Applicator 265902-n Carrier Removal Tool 265924-n .125 x .125.702 117793-n15-60117796-nHousing Assembly Tool 58292-n 3.18 x 3.1817.83 Housing Removal Tool 265868-1 Pin Replacement Tool 265871-2 Applicator 265904-n Carrier Removal Tool 265924-n .100 x .200.702 117795-n15-60117798-nHousing Assembly Tool 265879-n 2.54 x 5.0817.83 Housing Removal Tool 265868-1 Pin Replacement Tool 265871-2 Applicator 265905-n Carrier Removal Tool 265924-n .156 x .200.702 117285-n15-50117296-nHousing Assembly Tool 265881-n 3.96 x 5.0817.83 Housing Removal Tool 265868-1 Pin Replacement Tool 265871-2 Applicator 265906-n Carrier Removal Tool 265924-n .156 x .200.475 117285-n15-50117296-nHousing Assembly Tool 265881-n 3.96 x 5.0812.07 Housing Removal Tool 265868-1 Pin Replacement Tool 265871-3 Applicator 266129-n Carrier Removal Tool 265924-n .100 x .200.475 117795-n15-60117798-nHousing Assembly Tool 265879-n 2.54 x 5.0812.07 Housing Removal Tool 265868-1 Pin Replacement Tool 265871-3 Applicator 265937-n Carrier Removal Tool 265924-n .100 .340 117880-n20-60117879-nHousing Assembly Tool 265962-n 2.548.64 Housing Removal Tool 265868-2 Pin Replacement Tool 1-265871-1 For Feed-Through Posts ACTION PIN Contacts ACTION PIN Assembly PinNo. ofPartCenterlineTool Numbers LengthPositionsNumbers Applicator 265910-n .100.500-.687 8-60117249-nCarrier Removal Tool 265924-n 2.5412.70-17.45 Pin Replacement Tool 265871-7 Applicator 265911-n .125.687 8-60117272-nCarrier Removal Tool 265924-n 3.1817.45 Pin Replacement Tool 265871-7 Applicator 265912-n .150.687 8-50117269-nCarrier Removal Tool 265924-n 3.8117.45 Pin Replacement Tool 265871-7 Applicator 265931-n .150.365-.475 8-50117269-nCarrier Removal Tool 265924-n 3.819.27-12.07 Pin Replacement Tool 265871-7 126 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) High Density Press-Fit Card Edge Product Facts nHigh density .050" [1.27] center spacing. nStaggered contacts for low insertion force. nDesigned for multi-layer .093" [2.36] daughter cards. nHigh temperature SMT sol- der reflow temperatures of 260° for 30 seconds. nUnique pin geometry allows for even distribution of forces reducing axial pin rotation and preserving per- pendicularity to the PCB board. nEdge and side coining pro- vides a uniform pin radius ensuring maximum contact without "skiving" the plated hole. nFull complement of applica- tion tooling available. High Density (.050" [1.27] Electrical Characteristics: nRecognized under the center spacing) Press-Fit Operating Voltage–600VDC (sea Component Program of connectors from Tyco level) Underwriters Electronics are designed for Current Rating –1.5 Amperes Laboratories Inc., high density backplane or Initial Contact Resistance – File No. E60980 mid-plane applications. 30 milliohms Compliant pin connectors nCertified by Canadian from Tyco Electronics meet Environmental Standards ®Characteristics: or exceed requirements of Association, current industry standards, File No. LR 49571 Operating Temperature – including Bellcore specifica- -55˚C to +125˚C tions, which address critical Temperature Cycling – performance issues such as MIL-STD-202 method 107 hole retention, hole deforma- Vibration– tion and environmental per- MIL-STD-202, method 204 f o r m a n c e . 127 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) .050 [1.27] Centerline For .093 [2.36] Thick Daughter Cards Material and Finish: Insulation Resistance—1000 megohms minimum Contact Retention into PCB—2 lbs. min. Insertion Force—10 oz. max. Mating Force—2 oz. per contact Housing—High Temp. Glass filled thermoplastic, UL rating 94V-0 Color—Black Spring Contact—BeCu Contact Plating—Palladium Nickel +.005 .066 -.010 +.127 [1.68] X-.254 .610 [15.49].461 [11.71].421 [10.69] .016 [.41] .148 [3.76] X.138 [3.51] Section X-X “A”Spaces • .050[1.27] = B D C.132 (Card Slot)[3.35] .400 .332[10.15] [8.43] E Note:Dimension E is Connector Mounting PC Hole Pattern. 128 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) Ordering Information No. of DualDimensionsTYCOAcquired Readout Part NumberPart Number ABCDEFPosition 0.9501.0401.2301.1001.010 2019147668-2C9D020PF60048 [24.13][26.42][31.24][27.94][25.65] 1.4501.5401.7301.6001.510 3029147668-3C9D030PF60048 [36.83][39.12][43.94][40.64][38.35] 1.9502.0402.2302.1002.010 4039147668-4C9D040PF60048 [49.53][51.82][56.64][53.34][51.05] 2.4502.5402.7302.6002.510 5049147668-5C9D050PF60048 [62.23][64.52][69.34][66.04][63.75] 2.9503.0403.2303.1003.010 6059147668-6C9D060PF60048 [74.93][77.22][82.04][78.74][76.45] E ş .024±.002(.61±.05) ş .096(2.44) .166 [4.22] .066 [1.68] .096[2.44] .075 [1.90] “A”Spaces at .050[1.27] = B Connector Mounting PC Hole Pattern F.093 Thick PC Board [2.36] .030 .047“A”Spaces • .050[1.27] = BRTyp.[.76] [1.19] Y .320 Min. [8.13] .585 45° x .025[.64][14.86].150Y All Around [3.81] .035[.89] Typ. Section Y-Y Daughter Board .125Configuration [3.17] 129 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Press-Fit Board-To-Board) .100 x .100 [2.54 x 2.54] Centerline Press Fit, with Standoffs Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., .054 to .071 Accepts Thk. PC BoardFile No. E60980[3.37 to 1.80] nCertified by Canadian ± Standards [3.05±.25] .300[7.62] Point ofCard Slot Association, .350[8.89] ContactDepth .415[10.54]File No. LR49571 Physical Properties: Insulation Resistance— 5000 megohms minimum JContact Retention Into PCB— 5lbs. min. [356 N] Insertion Force—10 oz. [44.5 N] .100max. measured with a .0700 ± .0001 [2.54] [1.80±.00254] THK polished blade per MIL-C-21097C Withdrawal Force—1 oz. min. A[4.54 N] measured with a .0540 ± .0001 [3.37±.000254] THK polished test blade B per MIL-C-21097C after sizing 3 times with a .0700 ± .0001 [1.80±.00254] THK C blade Insulator Body—High Temp. Glass filled thermoplastic, UL rating 94V-O.020 Contact Gap [.51] Color—Black.365 Ref. [9.27] Spring Contact—Phosphor Bronze alloy Contact Plating—.000050 [0.00127].100 [2.54]nickel underplate with .000030 [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum Electrical Properties:.550 [13.97] Operating Voltage—600 VDC (sea level) Current Rating—3 Amperes Initial Contact Resistance—J 10 milliohms Environmental Properties:.100.025 Sq. Typ. [2.54][.64] Operating Temperature— -55˚C to +125˚CC Temperature Cycling— MIL-STD-202 method 107 Vibration—MIL-STD-202, method Dim C 204.040±.003 Dia. [1.02±.08] Application Tooling: Insertion Tool—page 150 .100Related Product Data: [2.54] Daughter Card Edge Pattern— .100 page 57[2.54] 130 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 . 0 0 3. 1 2 0 Card Edge Connectors (Press-Fit Board-To-Board) Ordering Information woR--owTo R4]2.5 [010e/.inerltenC ].542 [00.1sffnoda Sthitw alu Df o.oNrsbmeuN art PedirucqA osnisito PotdueaRABChtpeD tolS draC ]h4thp5te.pD0e 1Dt[ otl5o1Sl S4d .rdarCa C] 2]69.87.[8 [0 0035.3. Tail Length .180 [4.57] (Dim. “J”) )J”. “imD (]72.01 [75 .4htgen LailT 131 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 9 . 8 61 5 5 . 0 41 5 8 . 3 4 C 1 D 6 0 P F 2 9 0 4 5C 1 D 6 0 P F 2 9 1 3 5C 1 D 6 0 P F 2 9 0 1 56 0 5 . 9 0 06 . 1 0 46 . 2 3 4 1 2 4 . 4 61 2 9 . 6 41 3 2 . 9 4 C 1 D 5 0 P F 2 9 0 4 5C 1 D 5 0 P F 2 9 1 3 5C 1 D 5 0 P F 2 9 0 1 55 0 4 . 9 0 05 . 1 0 45 . 2 3 4 1 1 1 . 7 61 1 6 . 9 41 2 0 . 2 4 C 1 D 4 5 P F 2 9 0 4 5C 1 D 4 5 P F 2 9 1 3 5C 1 D 4 5 P F 2 9 0 1 54 5 4 . 4 0 04 . 6 0 44 . 7 3 4 1 0 6 . 6 81 1 1 . 8 61 1 5 . 1 6 C 1 D 4 3 P F 2 9 0 4 5C 1 D 4 3 P F 2 9 1 3 5C 1 D 4 3 P F 2 9 0 1 54 3 4 . 2 0 04 . 4 0 44 . 5 3 4 9 9 . 0 61 0 4 . 2 41 0 7 . 5 4 C 1 D 4 0 P F 2 9 0 4 5C 1 D 4 0 P F 2 9 1 3 5C 1 D 4 0 P F 2 9 0 1 54 0 3 . 9 0 04 . 1 0 44 . 2 3 4 8 8 . 9 09 4 . 0 89 7 . 3 8 C 1 D 3 6 P F 2 9 0 4 5C 1 D 3 6 P F 2 9 1 3 5C 1 D 3 6 P F 2 9 0 1 53 6 3 . 5 0 03 . 7 0 43 . 8 3 4 8 6 . 3 69 1 . 5 49 4 . 8 4 C 1 D 3 5 P F 2 9 0 4 5C 1 D 3 5 P F 2 9 1 3 5C 1 D 3 5 P F 2 9 0 1 53 5 3 . 4 0 03 . 6 0 43 . 7 3 4 7 3 . 6 67 8 . 8 48 2 . 1 4 C 1 D 3 0 P F 2 9 0 4 5C 1 D 3 0 P F 2 9 1 3 5C 1 D 3 0 P F 2 9 0 1 53 0 2 . 9 0 03 . 1 0 43 . 2 3 4 6 8 . 5 87 3 . 7 67 7 . 0 6 C 1 D 2 8 P F 2 9 0 4 5C 1 D 2 8 P F 2 9 1 3 5C 1 D 2 8 P F 2 9 0 1 52 8 2 . 7 0 02 . 9 0 43 . 0 3 4 6 0 . 9 66 6 . 1 46 9 . 4 4 C 1 D 2 5 P F 2 9 0 4 5C 1 D 2 5 P F 2 9 1 3 5C 1 D 2 5 P F 2 9 0 1 52 5 2 . 4 0 02 . 6 0 42 . 7 3 4 5 3 . 3 45 8 . 5 26 1 . 8 2 C 1 D 2 2 P F 2 9 0 4 5C 1 D 2 2 P F 2 9 1 3 5C 1 D 2 2 P F 2 9 0 1 52 2 2 . 1 0 02 . 3 0 42 . 4 3 4 4 8 . 2 65 3 . 4 45 6 . 7 4 C 1 D 2 0 P F 2 9 0 4 5C 1 D 2 0 P F 2 9 1 3 5C 1 D 2 0 P F 2 9 0 1 52 0 1 . 9 0 02 . 1 0 42 . 2 3 4 4 3 . 1 84 8 . 3 65 1 . 6 6 C 1 D 1 8 P F 2 9 0 4 5C 1 D 1 8 P F 2 9 1 3 5C 1 D 1 8 P F 2 9 0 1 51 8 1 . 7 0 01 . 9 0 42 . 0 3 4 1 4 9 . 8 61 5 5 . 0 41 5 8 . 3 4 C 1 D 6 0 P F 2 9 0 4 3C 1 D 6 0 P F 2 9 1 3 3C 1 D 6 0 P F 2 9 0 1 36 0 5 . 9 0 06 . 1 0 46 . 2 3 4 1 2 4 . 4 61 2 9 . 6 41 3 2 . 9 4 C 1 D 5 0 P F 2 9 0 4 3C 1 D 5 0 P F 2 9 1 3 3C 1 D 5 0 P F 2 9 0 1 35 0 4 . 9 0 05 . 1 0 45 . 2 3 4 1 1 1 . 7 61 1 6 . 9 41 2 0 . 2 4 C 1 D 4 5 P F 2 9 0 4 3C 1 D 4 5 P F 2 9 1 3 3C 1 D 4 5 P F 2 9 0 1 34 5 4 . 4 0 04 . 6 0 44 . 7 3 4 1 0 6 . 6 81 1 1 . 8 61 1 5 . 1 6 C 1 D 4 3 P F 2 9 0 4 3C 1 D 4 3 P F 2 9 1 3 3C 1 D 4 3 P F 2 9 0 1 34 3 4 . 2 0 04 . 4 0 44 . 5 3 4 9 9 . 0 61 0 4 . 2 41 0 7 . 5 4 C 1 D 4 0 P F 2 9 0 4 3C 1 D 4 0 P F 2 9 1 3 3C 1 D 4 0 P F 2 9 0 1 34 0 3 . 9 0 04 . 1 0 44 . 2 3 4 8 8 . 9 09 4 . 0 89 7 . 3 8 C 1 D 3 6 P F 2 9 0 4 3C 1 D 3 6 P F 2 9 1 3 3C 1 D 3 6 P F 2 9 0 1 33 6 3 . 5 0 03 . 7 0 43 . 8 3 4 8 6 . 3 69 1 . 5 49 4 . 8 4 C 1 D 3 5 P F 2 9 0 4 3C 1 D 3 5 P F 2 9 1 3 3C 1 D 3 5 P F 2 9 0 1 33 5 3 . 4 0 03 . 6 0 43 . 7 3 4 7 3 . 6 67 8 . 8 48 2 . 1 4 C 1 D 3 0 P F 2 9 0 4 3C 1 D 3 0 P F 2 9 1 3 3C 1 D 3 0 P F 2 9 0 1 33 0 2 . 9 0 03 . 1 0 43 . 2 3 4 6 8 . 5 87 3 . 7 67 7 . 0 6 C 1 D 2 8 P F 2 9 0 4 3C 1 D 2 8 P F 2 9 1 3 3C 1 D 2 8 P F 2 9 0 1 32 8 2 . 7 0 02 . 9 0 43 . 0 3 4 6 0 . 9 66 6 . 1 46 9 . 4 4 C 1 D 2 5 P F 2 9 0 4 3C 1 D 2 5 P F 2 9 1 3 3C 1 D 2 5 P F 2 9 0 1 32 5 2 . 4 0 02 . 6 0 42 . 7 3 4 5 3 . 3 45 8 . 5 26 1 . 8 2 C 1 D 2 2 P F 2 9 0 4 3C 1 D 2 2 P F 2 9 1 3 3C 1 D 2 2 P F 2 9 0 1 32 2 2 . 1 0 02 . 3 0 42 . 4 3 4 4 8 . 2 65 3 . 4 45 6 . 7 4 C 1 D 2 0 P F 2 9 0 4 3C 1 D 2 0 P F 2 9 1 3 3C 1 D 2 0 P F 2 9 0 1 32 0 1 . 9 0 02 . 1 0 42 . 2 3 4 4 3 . 1 84 8 . 3 65 1 . 6 6 C 1 D 1 8 P F 2 9 0 4 3C 1 D 1 8 P F 2 9 1 3 3C 1 D 1 8 P F 2 9 0 1 31 8 1 . 7 0 01 . 9 0 42 . 0 3 4 D i m e n s i o n s Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .100" [2.54] Centerline / .100" [2.54] Row-to-Row with Standoffs D i m e n s i o n s No. of Dual Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.84] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .625 [15.88] (Dim. “J”) 2 . 0 3 41 . 9 0 41 . 7 0 0 2 . 2 3 42 . 1 0 41 . 9 0 0 2 . 4 3 42 . 3 0 42 . 1 0 0 2 . 7 3 42 . 6 0 42 . 4 0 0 3 . 0 3 42 . 9 0 42 . 7 0 0 3 . 2 3 43 . 1 0 42 . 9 0 0 3 . 7 3 43 . 6 0 43 . 4 0 0 3 . 8 3 43 . 7 0 43 . 5 0 0 4 . 2 3 44 . 1 0 43 . 9 0 0 4 . 5 3 44 . 4 0 44 . 2 0 0 4 . 7 3 44 . 6 0 44 . 4 0 0 5 . 2 3 45 . 1 0 44 . 9 0 0 6 . 2 3 46 . 1 0 45 . 9 0 0 132 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 9 . 8 61 5 5 . 0 41 5 8 . 3 4 C 1 D 6 0 P F 2 9 0 4 7C 1 D 6 0 P F 2 9 1 3 7C 1 D 6 0 P F 2 9 0 1 76 0 1 2 4 . 4 61 2 9 . 6 41 3 2 . 9 4 C 1 D 5 0 P F 2 9 0 4 7C 1 D 5 0 P F 2 9 1 3 7C 1 D 5 0 P F 2 9 0 1 75 0 1 1 1 . 7 61 1 6 . 9 41 2 0 . 2 4 C 1 D 4 5 P F 2 9 0 4 7C 1 D 4 5 P F 2 9 1 3 7C 1 D 4 5 P F 2 9 0 1 74 5 1 0 6 . 6 81 1 1 . 8 61 1 5 . 1 6 C 1 D 4 3 P F 2 9 0 4 7C 1 D 4 3 P F 2 9 1 3 7C 1 D 4 3 P F 2 9 0 1 74 3 9 9 . 0 61 0 4 . 2 41 0 7 . 5 4 C 1 D 4 0 P F 2 9 0 4 7C 1 D 4 0 P F 2 9 1 3 7C 1 D 4 0 P F 2 9 0 1 74 0 8 8 . 9 09 4 . 0 89 7 . 3 8 C 1 D 3 6 P F 2 9 0 4 7C 1 D 3 6 P F 2 9 1 3 7C 1 D 3 6 P F 2 9 0 1 73 6 8 6 . 3 69 1 . 5 49 4 . 8 4 C 1 D 3 5 P F 2 9 0 4 7C 1 D 3 5 P F 2 9 1 3 7C 1 D 3 5 P F 2 9 0 1 73 5 7 3 . 6 67 8 . 8 48 2 . 1 4 C 1 D 3 0 P F 2 9 0 4 7C 1 D 3 0 P F 2 9 1 3 7C 1 D 3 0 P F 2 9 0 1 73 0 6 8 . 5 87 3 . 7 67 7 . 0 6 C 1 D 2 8 P F 2 9 0 4 7C 1 D 2 8 P F 2 9 1 3 7C 1 D 2 8 P F 2 9 0 1 72 8 6 0 . 9 66 6 . 1 46 9 . 4 4 C 1 D 2 5 P F 2 9 0 4 7C 1 D 2 5 P F 2 9 1 3 7C 1 D 2 5 P F 2 9 0 1 72 5 5 3 . 3 45 8 . 5 26 1 . 8 2 C 1 D 2 2 P F 2 9 0 4 7C 1 D 2 2 P F 2 9 1 3 7C 1 D 2 2 P F 2 9 0 1 72 2 4 8 . 2 65 3 . 4 45 6 . 7 4 C 1 D 2 0 P F 2 9 0 4 7C 1 D 2 0 P F 2 9 1 3 7C 1 D 2 0 P F 2 9 0 1 72 0 4 3 . 1 84 8 . 3 65 1 . 6 6 C 1 D 1 8 P F 2 9 0 4 7C 1 D 1 8 P F 2 9 1 3 7C 1 D 1 8 P F 2 9 0 1 71 8 Card Edge Connectors (Board-to-Board, Wire-to-Board) .100 x .200 [2.54 x 5.08] Centerline Press-Fit, Full Scoop Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 .21 Point of Contact [5.33] nCertified by Canadian Standards Association, .395/.510 Card Slot Depth [10.03/12.95] File No. LR49571 Physical Properties: Insulation Resistance— J 5000 megohms minimum. Contact Retention Into PCB— .200 5lbs. min. [356 N][5.08] Insertion Force—10 oz. [44.5 N] max. measured with a .0700 ± .0001 [1.80±.00254] THK polished blade per MIL-C-21097C Withdrawal Force—1 oz. min. B [4.5 N] measured with a .0540 ± .0001 C [3.37±.00254] THK polished test blade .020±.010 Contact Gapper MIL-C-21097C after sizing 3 times[.51±.25] with a .0700 ± .0001 [1.80±.00254] THK .390 [9.91]blade Insulator Body—High Temp. Glass filled thermoplastic, UL rating 94V-O .100 Color—Black[2.54] Spring Contact—Phosphor Bronze alloy Contact Plating—.000050 [0.00127] nickel underplate with .000030 B [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum .395/.510 Card Slot Depth [10.03/12.95] .645 Ref. Electrical Properties[16.38] Operating Voltage—600 VDC (sea level) Current Rating—3 Amperes J Contact Resistance—10 milliohms A Environmental Properties: C Operating Temperature— -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 Vibration— Dim E MIL-STD-202, method 204 .040±.003 Dia. [1.02±.08] Application Tooling: Insertion Tool—page 150 .200 Related Product Data: [5.08] Daughter Card Edge Pattern— .100 [2.54]page 57 Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 133 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .100 [2.54] Centerline / .200 [5.08] Row-to-Row Full Scoop D i m e n s i o n s No. of Dual Acquired Part Numbers Readout Positions A B C .510 [12.95] Card Slot Depth .395 [10.03] Card Slot Depth Tail Length .670 [17.02] (DIM “J”) 2 . 0 3 41 . 9 0 41 . 7 0 0 2 . 2 3 42 . 1 0 41 . 9 0 0 2 . 4 3 42 . 3 0 42 . 1 0 0 2 . 7 3 42 . 6 0 42 . 4 0 0 3 . 0 3 42 . 9 0 42 . 7 0 0 3 . 2 3 43 . 1 0 42 . 9 0 0 3 . 7 3 43 . 6 0 43 . 4 0 0 3 . 8 3 43 . 7 0 43 . 5 0 0 4 . 2 3 44 . 1 0 43 . 9 0 0 4 . 5 3 44 . 4 0 44 . 2 0 0 4 . 7 3 44 . 6 0 44 . 4 0 0 5 . 2 3 45 . 1 0 44 . 9 0 0 6 . 2 3 46 . 1 0 45 . 9 0 0 Tail Length .180 [4.57] (DIM “J”) 2 . 0 3 41 . 9 0 41 . 7 0 0 2 . 2 3 42 . 1 0 41 . 9 0 0 2 . 4 3 42 . 3 0 42 . 1 0 0 2 . 7 3 42 . 6 0 42 . 4 0 0 3 . 0 3 42 . 9 0 42 . 7 0 0 3 . 2 3 43 . 1 0 42 . 9 0 0 3 . 7 3 43 . 6 0 43 . 4 0 0 3 . 8 3 43 . 7 0 43 . 5 0 0 4 . 2 3 44 . 1 0 43 . 9 0 0 4 . 5 3 44 . 4 0 44 . 2 0 0 4 . 7 3 44 . 6 0 44 . 4 0 0 5 . 2 3 45 . 1 0 44 . 9 0 0 6 . 2 3 46 . 1 0 45 . 9 0 0 134 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 9 . 8 61 5 5 . 0 41 5 8 . 3 4 W 8 D 6 0 P F 2 9 0 4 3W 8 D 6 0 P F 2 9 0 1 36 0 1 2 4 . 4 61 2 9 . 6 41 3 2 . 9 4 W 8 D 5 0 P F 2 9 0 4 3W 8 D 5 0 P F 2 9 0 1 35 0 1 1 1 . 7 61 1 6 . 9 41 2 0 . 2 4 W 8 D 4 5 P F 2 9 0 4 3W 8 D 4 5 P F 2 9 0 1 34 5 1 0 6 . 6 81 1 1 . 8 61 1 5 . 1 6 W 8 D 4 3 P F 2 9 0 4 3W 8 D 4 3 P F 2 9 0 1 34 3 9 9 . 0 61 0 4 . 2 41 0 7 . 5 4 W 8 D 4 0 P F 2 9 0 4 3W 8 D 4 0 P F 2 9 0 1 34 0 8 8 . 9 09 4 . 0 89 7 . 3 8 W 8 D 3 6 P F 2 9 0 4 3W 8 D 3 6 P F 2 9 0 1 33 6 8 6 . 3 69 1 . 5 49 4 . 8 4 W 8 D 3 5 P F 2 9 0 4 3W 8 D 3 5 P F 2 9 0 1 33 5 7 3 . 6 67 8 . 8 48 2 . 1 4 W 8 D 3 0 P F 2 9 0 4 3W 8 D 3 0 P F 2 9 0 1 33 0 6 8 . 5 87 3 . 7 67 7 . 0 6 W 8 D 2 8 P F 2 9 0 4 3W 8 D 2 8 P F 2 9 0 1 32 8 6 0 . 9 66 6 . 1 46 9 . 4 4 W 8 D 2 5 P F 2 9 0 4 3W 8 D 2 5 P F 2 9 0 1 32 5 5 3 . 3 45 8 . 5 26 1 . 8 2 W 8 D 2 2 P F 2 9 0 4 3W 8 D 2 2 P F 2 9 0 1 32 2 4 8 . 2 65 3 . 4 45 6 . 7 4 W 8 D 2 0 P F 2 9 0 4 3W 8 D 2 0 P F 2 9 0 1 32 0 4 3 . 1 84 8 . 3 65 1 . 6 6 W 8 D 1 8 P F 2 9 0 4 3W 8 D 1 8 P F 2 9 0 1 31 8 1 4 9 . 8 61 5 5 . 0 41 5 8 . 3 4 W 8 D 6 0 P F 2 9 0 4 2W 8 D 6 0 P F 2 9 0 1 26 0 1 2 4 . 4 61 2 9 . 6 41 3 2 . 9 4 W 8 D 5 0 P F 2 9 0 4 2W 8 D 5 0 P F 2 9 0 1 25 0 1 1 1 . 7 61 1 6 . 9 41 2 0 . 2 4 W 8 D 4 5 P F 2 9 0 4 2W 8 D 4 5 P F 2 9 0 1 24 5 1 0 6 . 6 81 1 1 . 8 61 1 5 . 1 6 W 8 D 4 3 P F 2 9 0 4 2W 8 D 4 3 P F 2 9 0 1 24 3 9 9 . 0 61 0 4 . 2 41 0 7 . 5 4 W 8 D 4 0 P F 2 9 0 4 2W 8 D 4 0 P F 2 9 0 1 24 0 8 8 . 9 09 4 . 0 89 7 . 3 8 W 8 D 3 6 P F 2 9 0 4 2W 8 D 3 6 P F 2 9 0 1 23 6 8 6 . 3 69 1 . 5 49 4 . 8 4 W 8 D 3 5 P F 2 9 0 4 2W 8 D 3 5 P F 2 9 0 1 23 5 7 3 . 6 67 8 . 8 48 2 . 1 4 W 8 D 3 0 P F 2 9 0 4 2W 8 D 3 0 P F 2 9 0 1 23 0 6 8 . 5 87 3 . 7 67 7 . 0 6 W 8 D 2 8 P F 2 9 0 4 2W 8 D 2 8 P F 2 9 0 1 22 8 6 0 . 9 66 6 . 1 46 9 . 4 4 W 8 D 2 5 P F 2 9 0 4 2W 8 D 2 5 P F 2 9 0 1 22 5 5 3 . 3 45 8 . 5 26 1 . 8 2 W 8 D 2 2 P F 2 9 0 4 2W 8 D 2 2 P F 2 9 0 1 22 2 4 8 . 2 65 3 . 4 45 6 . 7 4 W 8 D 2 0 P F 2 9 0 4 2W 8 D 2 0 P F 2 9 0 1 22 0 4 3 . 1 84 8 . 3 65 1 . 6 6 W 8 D 1 8 P F 2 9 0 4 2W 8 D 1 8 P F 2 9 0 1 21 8 Card Edge Connectors (Board-to-Board, Wire-to-Board) .100 x .200 [2.54 x 5.08] Centerline, Press-Fit, Full Scoop with Standoffs Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 .21 Point of Contact [5.33] nCertified by Canadian Standards Association, .395/.510 Card Slot Depth [10.03/12.95] File No. LR49571 Physical Properties: Insulation Resistance— J 5000 megohms minimum. Contact Retention Into PCB— .200 5lbs. min. [356 N][5.08] Insertion Force—10 oz. [44.5 N] max. measured with a .0700 ± .0001 [1.80±.00254] THK polished blade per MIL-C-21097C Withdrawal Force—1 oz. min. B [4.5 N] measured with a .0540 ± .0001 C [3.37±.00254] THK polished test blade .020±.010 per MIL-C-21097C after sizing 3 timesContact Gap [.51±.25 ] with a .0700 ± .0001 [1.80±.00254] THK .390 [9.91]blade Insulator Body—High Temp. Glass filled thermoplastic, UL rating 94V-O .100 Color—Black[2.54] Spring Contact—Phosphor Bronze alloy Contact Plating—.000050 [0.00127] nickel underplate with .000030 B [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] minimum .395/.510 Card Slot Depth [10.03/12.95] .705 Ref. Electrical Properties:[17.91] Operating Voltage—600 VDC (sea level) Current Rating—3 Amperes J Initial Contact Resistance— C 10 milliohms A Environmental Properties: Operating Temperature— -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 Dim C Vibration— .040±.003 Dia. MIL-STD-202, method 204[1.02±.08] Application Tooling: Insertion Tool—page 150 .200 Related Product Data: [5.08] Daughter Card Edge Pattern— .100 page 57[2.54] Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 135 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .100 [2.54] Centerline / .200 [5.08] Row-to-Row Full Scoop with Standoffs D i m e n s i o n s No. of Dual Acquired Part Numbers Readout Positions A B C .510 [12.95] Card Slot Depth .395 [10.03] Card Slot Depth Tail Length .670 [17.02] (DIM “J”) 2 . 0 3 41 . 9 0 41 . 7 0 0 2 . 2 3 42 . 1 0 41 . 9 0 0 2 . 4 3 42 . 3 0 42 . 1 0 0 2 . 7 3 42 . 6 0 42 . 4 0 0 3 . 0 3 42 . 9 0 42 . 7 0 0 3 . 2 3 43 . 1 0 42 . 9 0 0 3 . 7 3 43 . 6 0 43 . 4 0 0 3 . 8 3 43 . 7 0 43 . 5 0 0 4 . 2 3 44 . 1 0 43 . 9 0 0 4 . 5 3 44 . 4 0 44 . 2 0 0 4 . 7 3 44 . 6 0 44 . 4 0 0 5 . 2 3 45 . 1 0 44 . 9 0 0 6 . 2 3 46 . 1 0 45 . 9 0 0 Tail Length .180 [4.57] (DIM “J”) 2 . 0 3 41 . 9 0 41 . 7 0 0 2 . 2 3 42 . 1 0 41 . 9 0 0 2 . 4 3 42 . 3 0 42 . 1 0 0 2 . 7 3 42 . 6 0 42 . 4 0 0 3 . 0 3 42 . 9 0 42 . 7 0 0 3 . 2 3 43 . 1 0 42 . 9 0 0 3 . 7 3 43 . 6 0 43 . 4 0 0 3 . 8 3 43 . 7 0 43 . 5 0 0 4 . 2 3 44 . 1 0 43 . 9 0 0 4 . 5 3 44 . 4 0 44 . 2 0 0 4 . 7 3 44 . 6 0 44 . 4 0 0 5 . 2 3 45 . 1 0 44 . 9 0 0 6 . 2 3 46 . 1 0 45 . 9 0 0 136 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 9 . 8 61 5 5 . 0 41 5 8 . 3 4 W 8 D 6 0 P F 2 9 0 9 3W 8 D 6 0 P F 2 9 0 6 36 0 1 2 4 . 4 61 2 9 . 6 41 3 2 . 9 4 W 8 D 5 0 P F 2 9 0 9 3W 8 D 5 0 P F 2 9 0 6 35 0 1 1 1 . 7 61 1 6 . 9 41 2 0 . 2 4 W 8 D 4 5 P F 2 9 0 9 3W 8 D 4 5 P F 2 9 0 6 34 5 1 0 6 . 6 81 1 1 . 8 61 1 5 . 1 6 W 8 D 4 3 P F 2 9 0 9 3W 8 D 4 3 P F 2 9 0 6 34 3 9 9 . 0 61 0 4 . 2 41 0 7 . 5 4 W 8 D 4 0 P F 2 9 0 9 3W 8 D 4 0 P F 2 9 0 6 34 0 8 8 . 9 09 4 . 0 89 7 . 3 8 W 8 D 3 6 P F 2 9 0 9 3W 8 D 3 6 P F 2 9 0 6 33 6 8 6 . 3 69 1 . 5 49 4 . 8 4 W 8 D 3 5 P F 2 9 0 9 3W 8 D 3 5 P F 2 9 0 6 33 5 7 3 . 6 67 8 . 8 48 2 . 1 4 W 8 D 3 0 P F 2 9 0 9 3W 8 D 3 0 P F 2 9 0 6 33 0 6 8 . 5 87 3 . 7 67 7 . 0 6 W 8 D 2 8 P F 2 9 0 9 3W 8 D 2 8 P F 2 9 0 6 32 8 6 0 . 9 66 6 . 1 46 9 . 4 4 W 8 D 2 5 P F 2 9 0 9 3W 8 D 2 5 P F 2 9 0 6 32 5 5 3 . 3 45 8 . 5 26 1 . 8 2 W 8 D 2 2 P F 2 9 0 9 3W 8 D 2 2 P F 2 9 0 6 32 2 4 8 . 2 65 3 . 4 45 6 . 7 4 W 8 D 2 0 P F 2 9 0 9 3W 8 D 2 0 P F 2 9 0 6 32 0 4 3 . 1 84 8 . 3 65 1 . 6 6 W 8 D 1 8 P F 2 9 0 9 3W 8 D 1 8 P F 2 9 0 6 31 8 1 4 9 . 8 61 5 5 . 0 41 5 8 . 3 4 W 8 D 6 0 P F 2 9 0 9 2W 8 D 6 0 P F 2 9 0 6 26 0 1 2 4 . 4 61 2 9 . 6 41 3 2 . 9 4 W 8 D 5 0 P F 2 9 0 9 2W 8 D 5 0 P F 2 9 0 6 25 0 1 1 1 . 7 61 1 6 . 9 41 2 0 . 2 4 W 8 D 4 5 P F 2 9 0 9 2W 8 D 4 5 P F 2 9 0 6 24 5 1 0 6 . 6 81 1 1 . 8 61 1 5 . 1 6 W 8 D 4 3 P F 2 9 0 9 2W 8 D 4 3 P F 2 9 0 6 24 3 9 9 . 0 61 0 4 . 2 41 0 7 . 5 4 W 8 D 4 0 P F 2 9 0 9 2W 8 D 4 0 P F 2 9 0 6 24 0 8 8 . 9 09 4 . 0 89 7 . 3 8 W 8 D 3 6 P F 2 9 0 9 2W 8 D 3 6 P F 2 9 0 6 23 6 8 6 . 3 69 1 . 5 49 4 . 8 4 W 8 D 3 5 P F 2 9 0 9 2W 8 D 3 5 P F 2 9 0 6 23 5 7 3 . 6 67 8 . 8 48 2 . 1 4 W 8 D 3 0 P F 2 9 0 9 2W 8 D 3 0 P F 2 9 0 6 23 0 6 8 . 5 87 3 . 7 67 7 . 0 6 W 8 D 2 8 P F 2 9 0 9 2W 8 D 2 8 P F 2 9 0 6 22 8 6 0 . 9 66 6 . 1 46 9 . 4 4 W 8 D 2 5 P F 2 9 0 9 2W 8 D 2 5 P F 2 9 0 6 22 5 5 3 . 3 45 8 . 5 26 1 . 8 2 W 8 D 2 2 P F 2 9 0 9 2W 8 D 2 2 P F 2 9 0 6 22 2 4 8 . 2 65 3 . 4 45 6 . 7 4 W 8 D 2 0 P F 2 9 0 9 2W 8 D 2 0 P F 2 9 0 6 22 0 4 3 . 1 84 8 . 3 65 1 . 6 6 W 8 D 1 8 P F 2 9 0 9 2W 8 D 1 8 P F 2 9 0 6 21 8 Card Edge Connectors (Board-to-Board, Wire-to-Board) .100 x .200 [2.54 x 5.08] Centerline, Press-Fit without Standoffs Product Facts nRecognized under the Component Program of Underwriters .054 to .071 Laboratories Inc.,Accepts Thk. PC Board [3.37 to 1.80] File No. E60980 nCertified . 1 2 0±. 0 0 3 by Canadian [3.05±.25] Standards .300[7.62]Point ofCard Slot .350[8.89]ContactAssociation, Depth .415[10.54] File No. LR49571 Physical Properties: Insulation Resistance— 5000 megohms minimum. Contact Retention Into PCB—5 lbs. J [356 N] Insertion/Withdrawal Force— 8 oz./2 oz. [35.6 N/ 8.9 N] average .200 contact pair using .0620 [1.57] steel [5.08] blade. Insulator Body—Glass filled thermoplastic, UL rating 94V-O A Color—Black Contacts—High strength copper alloy. B Contact Plating—.000050 [0.00127] nickel underplate with .000030 C [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] .020 minimumContact Gap [.51] .365 Ref. [9.27] Electrical Properties: Operating Voltage—600 VDC (sea level) .100 [2.54] Current Rating—3 Amperes Initial Contact Resistance— 10 milliohms Environmental Properties: .550 [13.97] Operating Temperature— -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 J Vibration— MIL-STD-202, method 204 .100 Application Tooling: .025 Sq. Typ. [2.54][.64] Insertion Tool—page 150 C Related Product Data: Daughter Card Edge Pattern— page 57 Dim C .040±.003 Dia. [1.02±.08] .200 [5.08] Note: Open ends and open/closed .100 ends are available. Consult Tyco[2.54] E l e c t r o n i c s . 137 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .100" [2.54] Centerline / .200" [5.08] Row-to-Row without Standoffs D i m e n s i o n s No. of Dual Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .670 [17.02] (“J”) 0 . 8 6 00 . 7 0 00 . 5 0 0 6 1 . 2 6 01 . 1 0 00 . 9 0 0 1 . 4 6 01 . 3 0 01 . 1 0 0 1 . 7 6 01 . 6 0 01 . 4 0 0 2 . 2 6 02 . 1 0 01 . 9 0 0 2 . 4 6 02 . 3 0 02 . 1 0 0 2 . 7 6 02 . 6 0 02 . 4 0 0 3 . 0 6 02 . 9 0 02 . 7 0 0 3 . 2 6 03 . 1 0 02 . 9 0 0 3 . 3 6 03 . 2 0 03 . 0 0 0 3 . 7 6 03 . 6 0 03 . 4 0 0 3 . 8 6 03 . 7 0 03 . 5 0 0 4 . 2 6 04 . 1 0 03 . 9 0 0 4 . 5 6 04 . 4 0 04 . 2 0 0 5 . 2 6 05 . 1 0 04 . 9 0 0 6 . 2 6 06 . 1 0 05 . 9 0 0 Tail Length .180 [4.57] (“J”) 0 . 8 6 00 . 7 0 00 . 5 0 0 6 1 . 2 6 01 . 1 0 00 . 9 0 0 1 . 4 6 01 . 3 0 01 . 1 0 0 1 . 7 6 01 . 6 0 01 . 4 0 0 2 . 2 6 02 . 1 0 01 . 9 0 0 2 . 4 6 02 . 3 0 02 . 1 0 0 2 . 7 6 02 . 6 0 02 . 4 0 0 3 . 0 6 02 . 9 0 02 . 7 0 0 3 . 2 6 03 . 1 0 02 . 9 0 0 3 . 3 6 03 . 2 0 03 . 0 0 0 3 . 7 6 03 . 6 0 03 . 4 0 0 3 . 8 6 03 . 7 0 03 . 5 0 0 4 . 2 6 04 . 1 0 03 . 9 0 0 4 . 5 6 04 . 4 0 04 . 2 0 0 5 . 2 6 05 . 1 0 04 . 9 0 0 6 . 2 6 06 . 1 0 05 . 9 0 0 138 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 9 . 8 61 5 4 . 9 41 5 9 . 0 0 C 8 D 6 0 P F 2 9 0 2 3C 8 D 6 0 P F 2 9 1 4 3C 8 D 6 0 P F 2 9 0 3 36 0 1 2 4 . 4 61 2 9 . 5 41 3 3 . 6 0 C 8 D 5 0 P F 2 9 0 2 3C 8 D 5 0 P F 2 9 1 4 3C 8 D 5 0 P F 2 9 0 3 35 0 1 0 6 . 6 81 1 1 . 7 61 1 5 . 8 2 C 8 D 4 3 P F 2 9 0 2 3C 8 D 4 3 P F 2 9 1 4 3C 8 D 4 3 P F 2 9 0 3 34 3 9 9 . 0 61 0 4 . 1 41 0 8 . 2 0 C 8 D 4 0 P F 2 9 0 2 3C 8 D 4 0 P F 2 9 1 4 3C 8 D 4 0 P F 2 9 0 3 34 0 8 8 . 9 09 3 . 9 89 8 . 0 4 C 8 D 3 6 P F 2 9 0 2 3C 8 D 3 6 P F 2 9 1 4 3C 8 D 3 6 P F 2 9 0 3 33 6 8 6 . 3 69 1 . 4 49 5 . 5 0 C 8 D 3 5 P F 2 9 0 2 3C 8 D 3 5 P F 2 9 1 4 3C 8 D 3 5 P F 2 9 0 3 33 5 7 6 . 2 08 1 . 2 88 5 . 3 4 C 8 D 3 1 P F 2 9 0 2 3C 8 D 3 1 P F 2 9 1 4 3C 8 D 3 1 P F 2 9 0 3 33 1 7 3 . 6 67 8 . 7 48 2 . 8 0 C 8 D 3 0 P F 2 9 0 2 3C 8 D 3 0 P F 2 9 1 4 3C 8 D 3 0 P F 2 9 0 3 33 0 6 8 . 5 87 3 . 6 67 7 . 7 2 C 8 D 2 8 P F 2 9 0 2 3C 8 D 2 8 P F 2 9 1 4 3C 8 D 2 8 P F 2 9 0 3 32 8 6 0 . 9 66 6 . 0 47 0 . 1 0 C 8 D 2 5 P F 2 9 0 2 3C 8 D 2 5 P F 2 9 1 4 3C 8 D 2 5 P F 2 9 0 3 32 5 5 3 . 3 45 8 . 4 26 2 . 4 8 C 8 D 2 2 P F 2 9 0 2 3C 8 D 2 2 P F 2 9 1 4 3C 8 D 2 2 P F 2 9 0 3 32 2 4 8 . 2 65 3 . 3 45 7 . 4 0 C 8 D 2 0 P F 2 9 0 2 3C 8 D 2 0 P F 2 9 1 4 3C 8 D 2 0 P F 2 9 0 3 32 0 3 5 . 5 64 0 . 6 44 4 . 7 0 C 8 D 1 5 P F 2 9 0 2 3C 8 D 1 5 P F 2 9 1 4 3C 8 D 1 5 P F 2 9 0 3 31 5 2 7 . 9 43 3 . 0 23 7 . 0 8 C 8 D 1 2 P F 2 9 0 2 3C 8 D 1 2 P F 2 9 1 4 3C 8 D 1 2 P F 2 9 0 3 31 2 2 2 . 8 62 7 . 9 43 2 . 0 0 C 8 D 1 0 P F 2 9 0 2 3C 8 D 1 0 P F 2 9 1 4 3C 8 D 1 0 P F 2 9 0 3 31 0 1 2 . 7 01 7 . 7 82 1 . 8 4 C 8 D 0 6 P F 2 9 0 2 3C 8 D 0 6 P F 2 9 1 4 3C 8 D 0 6 P F 2 9 0 3 3 1 4 9 . 8 61 5 4 . 9 41 5 9 . 0 0 C 8 D 6 0 P F 2 9 0 2 2C 8 D 6 0 P F 2 9 1 4 2C 8 D 6 0 P F 2 9 0 3 26 0 1 2 4 . 4 61 2 9 . 5 41 3 3 . 6 0 C 8 D 5 0 P F 2 9 0 2 2C 8 D 5 0 P F 2 9 1 4 2C 8 D 5 0 P F 2 9 0 3 25 0 1 0 6 . 6 81 1 1 . 7 61 1 5 . 8 2 C 8 D 4 3 P F 2 9 0 2 2C 8 D 4 3 P F 2 9 1 4 2C 8 D 4 3 P F 2 9 0 3 24 3 9 9 . 0 61 0 4 . 1 41 0 8 . 2 0 C 8 D 4 0 P F 2 9 0 2 2C 8 D 4 0 P F 2 9 1 4 2C 8 D 4 0 P F 2 9 0 3 24 0 8 8 . 9 09 3 . 9 89 8 . 0 4 C 8 D 3 6 P F 2 9 0 2 2C 8 D 3 6 P F 2 9 1 4 2C 8 D 3 6 P F 2 9 0 3 23 6 8 6 . 3 69 1 . 4 49 5 . 5 0 C 8 D 3 5 P F 2 9 0 2 2C 8 D 3 5 P F 2 9 1 4 2C 8 D 3 5 P F 2 9 0 3 23 5 7 6 . 2 08 1 . 2 88 5 . 3 4 C 8 D 3 1 P F 2 9 0 2 2C 8 D 3 1 P F 2 9 1 4 2C 8 D 3 1 P F 2 9 0 3 23 1 7 3 . 6 67 8 . 7 48 2 . 8 0 C 8 D 3 0 P F 2 9 0 2 2C 8 D 3 0 P F 2 9 1 4 2C 8 D 3 0 P F 2 9 0 3 23 0 6 8 . 5 87 3 . 6 67 7 . 7 2 C 8 D 2 8 P F 2 9 0 2 2C 8 D 2 8 P F 2 9 1 4 2C 8 D 2 8 P F 2 9 0 3 22 8 6 0 . 9 66 6 . 0 47 0 . 1 0 C 8 D 2 5 P F 2 9 0 2 2C 8 D 2 5 P F 2 9 1 4 2C 8 D 2 5 P F 2 9 0 3 22 5 5 3 . 3 45 8 . 4 26 2 . 4 8 C 8 D 2 2 P F 2 9 0 2 2C 8 D 2 2 P F 2 9 1 4 2C 8 D 2 2 P F 2 9 0 3 22 2 4 8 . 2 65 3 . 3 45 7 . 4 0 C 8 D 2 0 P F 2 9 0 2 2C 8 D 2 0 P F 2 9 1 4 2C 8 D 2 0 P F 2 9 0 3 22 0 3 5 . 5 64 0 . 6 44 4 . 7 0 C 8 D 1 5 P F 2 9 0 2 2C 8 D 1 5 P F 2 9 1 4 2C 8 D 1 5 P F 2 9 0 3 21 5 2 7 . 9 43 3 . 0 23 7 . 0 8 C 8 D 1 2 P F 2 9 0 2 2C 8 D 1 2 P F 2 9 1 4 2C 8 D 1 2 P F 2 9 0 3 21 2 2 2 . 8 62 7 . 9 43 2 . 0 0 C 8 D 1 0 P F 2 9 0 2 2C 8 D 1 0 P F 2 9 1 4 2C 8 D 1 0 P F 2 9 0 3 21 0 1 2 . 7 01 7 . 7 82 1 . 8 4 C 8 D 0 6 P F 2 9 0 2 2C 8 D 0 6 P F 2 9 1 4 2C 8 D 0 6 P F 2 9 0 3 2 Card Edge Connectors (Board-to-Board, Wire-to-Board) .100 x .200 [2.54 x 5.08] Centerline, Press-Fit with Standoffs Product Facts nRecognized under the Component Program .054 to .071 Accepts Thk. PC Board [1.37 to 1.80] of Underwriters Laboratories Inc., File No. E60980 . 1 2 0±. 0 0 3 [3.05±.25]nCertified .300[7.62]Point ofCard Slot by Canadian .350[8.89]ContactDepth .415[10.54]Standards Association, File No. LR49571 Physical Properties: Insulation Resistance— J 5000 megohms minimum. Contact Retention Into PCB—5 lbs. [356 N] .200 [5.08] Insertion/Withdrawal Force— 8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. A Insulator Body—Glass filled B thermoplastic, UL rating 94V-O Color—Black C Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] .020 nickel underplate with .000030Contact Gap [.51] [0.00076] gold in the mating area, .365 Ref.[9.27] tin/lead on tails, .000100 [0.00254] minimum .100 Electrical Properties: [2.54] Operating Voltage—600 VDC (sea level) Current Rating—3 Amperes .610 Initial Contact Resistance— [15.49] 10 milliohms Environmental Properties: Operating Temperature— J -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 .100 .025 Sq. [2.54][.64] Vibration— MIL-STD-202, method 204 C Application Tooling: Dim C Insertion Tool—page 150 .040±.003 Dia. [1.02±.08] Related Product Data: Daughter Card Edge Pattern— page 57 .200 [5.08] .100 [2.54] Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 139 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information Ordering Information .100 [2.54] Center-to-Center/.200 [5.08] Row-To-Row with Standoffs D i m e n s i o n s No. of Dual Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .670 [17.02] (dim “J”) 0 . 8 6 00 . 7 0 00 . 5 0 0 6 1 . 2 6 01 . 1 0 00 . 9 0 0 1 . 4 6 01 . 3 0 01 . 1 0 0 1 . 7 6 01 . 6 0 01 . 4 0 0 2 . 2 6 02 . 1 0 01 . 9 0 0 2 . 4 6 02 . 3 0 02 . 1 0 0 2 . 7 6 02 . 6 0 02 . 4 0 0 3 . 0 6 02 . 9 0 02 . 7 0 0 3 . 2 6 03 . 1 0 02 . 9 0 0 3 . 3 6 03 . 2 0 03 . 0 0 0 3 . 7 6 03 . 6 0 03 . 4 0 0 3 . 8 6 03 . 7 0 03 . 5 0 0 4 . 2 6 04 . 1 0 03 . 9 0 0 4 . 5 6 04 . 4 0 04 . 2 0 0 5 . 2 6 05 . 1 0 04 . 9 0 0 6 . 2 6 06 . 1 0 05 . 9 0 0 Tail Length .180 [4.57] (dim “J”) 0 . 8 6 00 . 7 0 00 . 5 0 0 6 1 . 2 6 01 . 1 0 00 . 9 0 0 1 . 4 6 01 . 3 0 01 . 1 0 0 1 . 7 6 01 . 6 0 01 . 4 0 0 2 . 2 6 02 . 1 0 01 . 9 0 0 2 . 4 6 02 . 3 0 02 . 1 0 0 2 . 7 6 02 . 6 0 02 . 4 0 0 3 . 0 6 02 . 9 0 02 . 7 0 0 3 . 2 6 03 . 1 0 02 . 9 0 0 3 . 3 6 03 . 2 0 03 . 0 0 0 3 . 7 6 03 . 6 0 03 . 4 0 0 3 . 8 6 03 . 7 0 03 . 5 0 0 4 . 2 6 04 . 1 0 03 . 9 0 0 4 . 5 6 04 . 4 0 04 . 2 0 0 5 . 2 6 05 . 1 0 04 . 9 0 0 6 . 2 6 06 . 1 0 05 . 9 0 0 140 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 9 . 8 61 5 4 . 9 41 5 9 . 0 0 C 8 D 6 0 P F 2 9 0 4 3C 8 D 6 0 P F 2 9 1 3 3C 8 D 6 0 P F 2 9 0 1 36 0 1 2 4 . 4 61 2 9 . 5 41 3 3 . 6 0 C 8 D 5 0 P F 2 9 0 4 3C 8 D 5 0 P F 2 9 1 3 3C 8 D 5 0 P F 2 9 0 1 35 0 1 0 6 . 6 81 1 1 . 7 61 1 5 . 8 2 C 8 D 4 3 P F 2 9 0 4 3C 8 D 4 3 P F 2 9 1 3 3C 8 D 4 3 P F 2 9 0 1 34 3 9 9 . 0 61 0 4 . 1 41 0 8 . 2 0 C 8 D 4 0 P F 2 9 0 4 3C 8 D 4 0 P F 2 9 1 3 3C 8 D 4 0 P F 2 9 0 1 34 0 8 8 . 9 09 3 . 9 89 8 . 0 4 C 8 D 3 6 P F 2 9 0 4 3C 8 D 3 6 P F 2 9 1 3 3C 8 D 3 6 P F 2 9 0 1 33 6 8 6 . 3 69 1 . 4 49 5 . 5 0 C 8 D 3 5 P F 2 9 0 4 3C 8 D 3 5 P F 2 9 1 3 3C 8 D 3 5 P F 2 9 0 1 33 5 7 6 . 2 08 1 . 2 88 5 . 3 4 C 8 D 3 1 P F 2 9 0 4 3C 8 D 3 1 P F 2 9 1 3 3C 8 D 3 1 P F 2 9 0 1 33 1 7 3 . 6 67 8 . 7 48 2 . 8 0 C 8 D 3 0 P F 2 9 0 4 3C 8 D 3 0 P F 2 9 1 3 3C 8 D 3 0 P F 2 9 0 1 33 0 6 8 . 5 87 3 . 6 67 7 . 7 2 C 8 D 2 8 P F 2 9 0 4 3C 8 D 2 8 P F 2 9 1 3 3C 8 D 2 8 P F 2 9 0 1 32 8 6 0 . 9 66 6 . 0 47 0 . 1 0 C 8 D 2 5 P F 2 9 0 4 3C 8 D 2 5 P F 2 9 1 3 3C 8 D 2 5 P F 2 9 0 1 32 5 5 3 . 3 45 8 . 4 26 2 . 4 8 C 8 D 2 2 P F 2 9 0 4 3C 8 D 2 2 P F 2 9 1 3 3C 8 D 2 2 P F 2 9 0 1 32 2 4 8 . 2 65 3 . 3 45 7 . 4 0 C 8 D 2 0 P F 2 9 0 4 3C 8 D 2 0 P F 2 9 1 3 3C 8 D 2 0 P F 2 9 0 1 32 0 3 5 . 5 64 0 . 6 44 4 . 7 0 C 8 D 1 5 P F 2 9 0 4 3C 8 D 1 5 P F 2 9 1 3 3C 8 D 1 5 P F 2 9 0 1 31 5 2 7 . 9 43 3 . 0 23 7 . 0 8 C 8 D 1 2 P F 2 9 0 4 3C 8 D 1 2 P F 2 9 1 3 3C 8 D 1 2 P F 2 9 0 1 31 2 2 2 . 8 62 7 . 9 43 2 . 0 0 C 8 D 1 0 P F 2 9 0 4 3C 8 D 1 0 P F 2 9 1 3 3C 8 D 1 0 P F 2 9 0 1 31 0 1 2 . 7 01 7 . 7 82 1 . 8 4 C 8 D 0 6 P F 2 9 0 4 3C 8 D 0 6 P F 2 9 1 3 3C 8 D 0 6 P F 2 9 0 1 3 1 4 9 . 8 61 5 4 . 9 41 5 9 . 0 0 C 8 D 6 0 P F 2 9 0 4 2C 8 D 6 0 P F 2 9 1 3 2C 8 D 6 0 P F 2 9 0 1 26 0 1 2 4 . 4 61 2 9 . 5 41 3 3 . 6 0 C 8 D 5 0 P F 2 9 0 4 2C 8 D 5 0 P F 2 9 1 3 2C 8 D 5 0 P F 2 9 0 1 25 0 1 0 6 . 6 81 1 1 . 7 61 1 5 . 8 2 C 8 D 4 3 P F 2 9 0 4 2C 8 D 4 3 P F 2 9 1 3 2C 8 D 4 3 P F 2 9 0 1 24 3 9 9 . 0 61 0 4 . 1 41 0 8 . 2 0 C 8 D 4 0 P F 2 9 0 4 2C 8 D 4 0 P F 2 9 1 3 2C 8 D 4 0 P F 2 9 0 1 24 0 8 8 . 9 09 3 . 9 89 8 . 0 4 C 8 D 3 6 P F 2 9 0 4 2C 8 D 3 6 P F 2 9 1 3 2C 8 D 3 6 P F 2 9 0 1 23 6 8 6 . 3 69 1 . 4 49 5 . 5 0 C 8 D 3 5 P F 2 9 0 4 2C 8 D 3 5 P F 2 9 1 3 2C 8 D 3 5 P F 2 9 0 1 23 5 7 6 . 2 08 1 . 2 88 5 . 3 4 C 8 D 3 1 P F 2 9 0 4 2C 8 D 3 1 P F 2 9 1 3 2C 8 D 3 1 P F 2 9 0 1 23 1 7 3 . 6 67 8 . 7 48 2 . 8 0 C 8 D 3 0 P F 2 9 0 4 2C 8 D 3 0 P F 2 9 1 3 2C 8 D 3 0 P F 2 9 0 1 23 0 6 8 . 5 87 3 . 6 67 7 . 7 2 C 8 D 2 8 P F 2 9 0 4 2C 8 D 2 8 P F 2 9 1 3 2C 8 D 2 8 P F 2 9 0 1 22 8 6 0 . 9 66 6 . 0 47 0 . 1 0 C 8 D 2 5 P F 2 9 0 4 2C 8 D 2 5 P F 2 9 1 3 2C 8 D 2 5 P F 2 9 0 1 22 5 5 3 . 3 45 8 . 4 26 2 . 4 8 C 8 D 2 2 P F 2 9 0 4 2C 8 D 2 2 P F 2 9 1 3 2C 8 D 2 2 P F 2 9 0 1 22 2 4 8 . 2 65 3 . 3 45 7 . 4 0 C 8 D 2 0 P F 2 9 0 4 2C 8 D 2 0 P F 2 9 1 3 2C 8 D 2 0 P F 2 9 0 1 22 0 3 5 . 5 64 0 . 6 44 4 . 7 0 C 8 D 1 5 P F 2 9 0 4 2C 8 D 1 5 P F 2 9 1 3 2C 8 D 1 5 P F 2 9 0 1 21 5 2 7 . 9 43 3 . 0 23 7 . 0 8 C 8 D 1 2 P F 2 9 0 4 2C 8 D 1 2 P F 2 9 1 3 2C 8 D 1 2 P F 2 9 0 1 21 2 2 2 . 8 62 7 . 9 43 2 . 0 0 C 8 D 1 0 P F 2 9 0 4 2C 8 D 1 0 P F 2 9 1 3 2C 8 D 1 0 P F 2 9 0 1 21 0 1 2 . 7 01 7 . 7 82 1 . 8 4 C 8 D 0 6 P F 2 9 0 4 2C 8 D 0 6 P F 2 9 1 3 2C 8 D 0 6 P F 2 9 0 1 2 Card Edge Connectors (Board-to-Board, Wire-to-Board) .125 x .250 [3.18 x 6.35] Centerline without Standoffs Product Facts nRecognized under the Component Program .054 to .071 Accepts Thk. PC Board of Underwriters [1.37 to 1.80] Laboratories Inc., File No. E60980 . 1 2 0±. 0 0 3 nCertified[3.05±.25] .300[7.62]Point ofCard Slot by Canadian .350[8.89]ContactDepth Standards .415[10.54] Association, File No. LR49571 Physical Properties: Insulation Resistance— J 5000 megohms minimum. Contact Retention Into PCB—5 lbs. [356 N] .250 Insertion/Withdrawal Force—[6.35] 8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel blade. A Insulator Body—Glass filled thermoplastic, UL rating 94V-O B Color—Black C Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] nickel underplate with .000030 .020 Contact Gap [0.00076] gold in the mating area,[.51] .365 tin/lead on tails, .000100 [0.00254][9.27] minimum Electrical Properties: .125 [3.18] Operating Voltage—1000 VDC (sea level) Current Rating—3 Amperes Initial Contact Resistance— 10 milliohms .550 [13.97] Environmental Properties: Operating Temperature— -55˚C to +125˚C J Temperature Cycling— MIL-STD-202 method 107 Vibration— .125 MIL-STD-202, method 204 .025 Sq. Typ.[3.18][.64] Application Tooling: C Insertion Tool—page 150 Related Product Data: Daughter Card Edge Pattern— Dim C page 57 .040±.003 Dia. [1.02±.08] .250 [6.35] .125 [3.18] Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 141 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .125 [3.18] Centerline /.250 [6.35] Row-to-Row without Standoffs D i m e n s i o n s No. of Dual Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .670 [17.02] (DIM “J”) 1 . 0 3 50 . 8 7 50 . 6 2 5 6 1 . 5 3 51 . 3 7 51 . 1 2 5 1 . 7 8 51 . 6 2 51 . 3 7 5 2 . 1 6 02 . 0 0 01 . 7 5 0 2 . 5 3 52 . 3 7 52 . 1 2 5 2 . 7 8 52 . 6 2 52 . 3 7 5 3 . 0 3 52 . 8 7 52 . 6 2 5 3 . 4 1 03 . 2 5 03 . 0 0 0 3 . 7 8 53 . 6 2 53 . 3 7 5 4 . 0 3 53 . 8 7 53 . 6 2 5 4 . 1 6 04 . 0 0 03 . 7 5 0 4 . 6 6 04 . 5 0 04 . 2 5 0 4 . 7 8 54 . 6 2 54 . 3 7 5 5 . 2 8 55 . 1 2 54 . 8 7 5 5 . 6 6 05 . 5 0 05 . 2 5 0 6 . 5 3 56 . 3 7 56 . 1 2 5 Tail Length .180 [4.57] (DIM “J”) 1 . 0 3 50 . 8 7 50 . 6 2 5 6 1 . 5 3 51 . 3 7 51 . 1 2 5 1 . 7 8 51 . 6 2 51 . 3 7 5 2 . 1 6 02 . 0 0 01 . 7 5 0 2 . 5 3 52 . 3 7 52 . 1 2 5 2 . 7 8 52 . 6 2 52 . 3 7 5 3 . 0 3 52 . 8 7 52 . 6 2 5 3 . 4 1 03 . 2 5 03 . 0 0 0 3 . 7 8 53 . 6 2 53 . 3 7 5 4 . 0 3 53 . 8 7 53 . 6 2 5 4 . 1 6 04 . 0 0 03 . 7 5 0 4 . 6 6 04 . 5 0 04 . 2 5 0 4 . 7 8 54 . 6 2 54 . 3 7 5 5 . 2 8 55 . 1 2 54 . 8 7 5 5 . 6 6 05 . 5 0 05 . 2 5 0 6 . 5 3 56 . 3 7 56 . 1 2 5 142 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 5 5 . 5 81 6 1 . 9 31 6 5 . 9 9 C 7 D 5 0 P F 2 9 0 2 3C 7 D 5 0 P F 2 9 1 4 3C 7 D 5 0 P F 2 9 0 3 35 0 1 3 3 . 3 51 3 9 . 7 01 4 3 . 7 6 C 7 D 4 3 P F 2 9 0 2 3C 7 D 4 3 P F 2 9 1 4 3C 7 D 4 3 P F 2 9 0 3 34 3 1 2 3 . 8 31 3 0 . 1 81 3 4 . 2 4 C 7 D 4 0 P F 2 9 0 2 3C 7 D 4 0 P F 2 9 1 4 3C 7 D 4 0 P F 2 9 0 3 34 0 1 1 1 . 1 31 1 7 . 4 81 2 1 . 5 4 C 7 D 3 6 P F 2 9 0 2 3C 7 D 3 6 P F 2 9 1 4 3C 7 D 3 6 P F 2 9 0 3 33 6 1 0 7 . 9 51 1 4 . 3 01 1 8 . 3 6 C 7 D 3 5 P F 2 9 0 2 3C 7 D 3 5 P F 2 9 1 4 3C 7 D 3 5 P F 2 9 0 3 33 5 9 5 . 2 51 0 1 . 6 01 0 5 . 6 6 C 7 D 3 1 P F 2 9 0 2 3C 7 D 3 1 P F 2 9 1 4 3C 7 D 3 1 P F 2 9 0 3 33 1 9 2 . 0 89 8 . 4 31 0 2 . 4 9 C 7 D 3 0 P F 2 9 0 2 3C 7 D 3 0 P F 2 9 1 4 3C 7 D 3 0 P F 2 9 0 3 33 0 8 5 . 7 39 2 . 0 89 6 . 1 4 C 7 D 2 8 P F 2 9 0 2 3C 7 D 2 8 P F 2 9 1 4 3C 7 D 2 8 P F 2 9 0 3 32 8 7 6 . 2 08 2 . 5 58 6 . 6 1 C 7 D 2 5 P F 2 9 0 2 3C 7 D 2 5 P F 2 9 1 4 3C 7 D 2 5 P F 2 9 0 3 32 5 6 6 . 6 87 3 . 0 37 7 . 0 9 C 7 D 2 2 P F 2 9 0 2 3C 7 D 2 2 P F 2 9 1 4 3C 7 D 2 2 P F 2 9 0 3 32 2 6 0 . 3 36 6 . 6 87 0 . 7 4 C 7 D 2 0 P F 2 9 0 2 3C 7 D 2 0 P F 2 9 1 4 3C 7 D 2 0 P F 2 9 0 3 32 0 5 3 . 9 86 0 . 3 36 4 . 3 9 C 7 D 1 8 P F 2 9 0 2 3C 7 D 1 8 P F 2 9 1 4 3C 7 D 1 8 P F 2 9 0 3 31 8 4 4 . 4 55 0 . 8 05 4 . 8 6 C 7 D 1 5 P F 2 9 0 2 3C 7 D 1 5 P F 2 9 1 4 3C 7 D 1 5 P F 2 9 0 3 31 5 3 4 . 9 34 1 . 2 84 5 . 3 4 C 7 D 1 2 P F 2 9 0 2 3C 7 D 1 2 P F 2 9 1 4 3C 7 D 1 2 P F 2 9 0 3 31 2 2 8 . 5 83 4 . 9 33 8 . 9 9 C 7 D 1 0 P F 2 9 0 2 3C 7 D 1 0 P F 2 9 1 4 3C 7 D 1 0 P F 2 9 0 3 31 0 1 5 . 8 82 2 . 2 32 6 . 2 9 C 7 D 0 6 P F 2 9 0 2 3C 7 D 0 6 P F 2 9 1 4 3C 7 D 0 6 P F 2 9 0 3 3 1 5 5 . 5 81 6 1 . 9 31 6 5 . 9 9 C 7 D 5 0 P F 2 9 0 2 2C 7 D 5 0 P F 2 9 1 4 2C 7 D 5 0 P F 2 9 0 3 25 0 1 3 3 . 3 51 3 9 . 7 01 4 3 . 7 6 C 7 D 4 3 P F 2 9 0 2 2C 7 D 4 3 P F 2 9 1 4 2C 7 D 4 3 P F 2 9 0 3 24 3 1 2 3 . 8 31 3 0 . 1 81 3 4 . 2 4 C 7 D 4 0 P F 2 9 0 2 2C 7 D 4 0 P F 2 9 1 4 2C 7 D 4 0 P F 2 9 0 3 24 0 1 1 1 . 1 31 1 7 . 4 81 2 1 . 5 4 C 7 D 3 6 P F 2 9 0 2 2C 7 D 3 6 P F 2 9 1 4 2C 7 D 3 6 P F 2 9 0 3 23 6 1 0 7 . 9 51 1 4 . 3 01 1 8 . 3 6 C 7 D 3 5 P F 2 9 0 2 2C 7 D 3 5 P F 2 9 1 4 2C 7 D 3 5 P F 2 9 0 3 23 5 9 5 . 2 51 0 1 . 6 01 0 5 . 6 6 C 7 D 3 1 P F 2 9 0 2 2C 7 D 3 1 P F 2 9 1 4 2C 7 D 3 1 P F 2 9 0 3 23 1 9 2 . 0 89 8 . 4 31 0 2 . 4 9 C 7 D 3 0 P F 2 9 0 2 2C 7 D 3 0 P F 2 9 1 4 2C 7 D 3 0 P F 2 9 0 3 23 0 8 5 . 7 39 2 . 0 89 6 . 1 4 C 7 D 2 8 P F 2 9 0 2 2C 7 D 2 8 P F 2 9 1 4 2C 7 D 2 8 P F 2 9 0 3 22 8 7 6 . 2 08 2 . 5 58 6 . 6 1 C 7 D 2 5 P F 2 9 0 2 2C 7 D 2 5 P F 2 9 1 4 2C 7 D 2 5 P F 2 9 0 3 22 5 6 6 . 6 87 3 . 0 37 7 . 0 9 C 7 D 2 2 P F 2 9 0 2 2C 7 D 2 2 P F 2 9 1 4 2C 7 D 2 2 P F 2 9 0 3 22 2 6 0 . 3 36 6 . 6 87 0 . 7 4 C 7 D 2 0 P F 2 9 0 2 2C 7 D 2 0 P F 2 9 1 4 2C 7 D 2 0 P F 2 9 0 3 22 0 5 3 . 9 86 0 . 3 36 4 . 3 9 C 7 D 1 8 P F 2 9 0 2 2C 7 D 1 8 P F 2 9 1 4 2C 7 D 1 8 P F 2 9 0 3 21 8 4 4 . 4 55 0 . 8 05 4 . 8 6 C 7 D 1 5 P F 2 9 0 2 2C 7 D 1 5 P F 2 9 1 4 2C 7 D 1 5 P F 2 9 0 3 21 5 3 4 . 9 34 1 . 2 84 5 . 3 4 C 7 D 1 2 P F 2 9 0 2 2C 7 D 1 2 P F 2 9 1 4 2C 7 D 1 2 P F 2 9 0 3 21 2 2 8 . 5 83 4 . 9 33 8 . 9 9 C 7 D 1 0 P F 2 9 0 2 2C 7 D 1 0 P F 2 9 1 4 2C 7 D 1 0 P F 2 9 0 3 21 0 1 5 . 8 82 2 . 2 32 6 . 2 9 C 7 D 0 6 P F 2 9 0 2 2C 7 D 0 6 P F 2 9 1 4 2C 7 D 0 6 P F 2 9 0 3 2 Card Edge Connectors (Board-to-Board, Wire-to-Board) .125 x .250 [3.18 x 6.35] Centerline with Standoffs Product Facts nRecognized under the Component Program .054 to .071 Accepts Thk. PC Board of Underwriters [1.37 to 1.80] Laboratories Inc., File No. E60980 . 1 2 0±. 0 0 3 [3.05±.25]nCertified .300[7.62]Point ofCard Slot by Canadian .350[8.89]ContactDepth .415[10.54]Standards Association, File No. LR49571 Physical Properties: Insulation Resistance— J 5000 megohms minimum. Contact Retention Into PCB—5 lbs. [356 N] .200 [5.08] Insertion/Withdrawal Force— 8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel A blade. Insulator Body—Glass filled B thermoplastic, UL rating 94V-O Color—Black C Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] .020 Contact Gap nickel underplate with .000030[.51] .365 [0.00076] gold in the mating area, [9.27] tin/lead on tails, .000100 [0.00254] minimum .125 [3.18]Electrical Properties: Operating Voltage—1000 VDC (sea level) Current Rating—3 Amperes Initial Contact Resistance— .550 10 milliohms[13.97] Environmental Properties: Operating Temperature— -55˚C to +125˚C J Temperature Cycling— MIL-STD-202 method 107 Vibration— .125 .025 Sq. Typ. [3.18]MIL-STD-202, method 204[.64] C Application Tooling: Insertion Tool—page 150 Related Product Data: Dim C .040±.003 Daughter Card Edge Pattern—Dia. [1.02±.08] page 57 .250 [6.35] .125 [3.18] Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 143 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .125 [3.18] Centerline /.250 [6.35] Row-to-Row with Standoffs D i m e n s i o n s No. of Dual Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth Tail Length .670 [17.02] (DIM “J”) 1 . 0 3 50 . 8 7 50 . 6 2 5 6 1 . 5 3 51 . 3 7 51 . 1 2 5 1 . 7 8 51 . 6 2 51 . 3 7 5 2 . 1 6 02 . 0 0 01 . 7 5 0 2 . 5 3 52 . 3 7 52 . 1 2 5 2 . 7 8 52 . 6 2 52 . 3 7 5 3 . 0 3 52 . 8 7 52 . 6 2 5 3 . 4 1 03 . 2 5 03 . 0 0 0 3 . 7 8 53 . 6 2 53 . 3 7 5 4 . 0 3 53 . 8 7 53 . 6 2 5 4 . 1 6 04 . 0 0 03 . 7 5 0 4 . 6 6 04 . 5 0 04 . 2 5 0 4 . 7 8 54 . 6 2 54 . 3 7 5 5 . 2 8 55 . 1 2 54 . 8 7 5 5 . 6 6 05 . 5 0 05 . 2 5 0 6 . 5 3 56 . 3 7 56 . 1 2 5 Tail Length .180 [4.57] (DIM “J”) 1 . 0 3 50 . 8 7 50 . 6 2 5 6 1 . 5 3 51 . 3 7 51 . 1 2 5 1 . 7 8 51 . 6 2 51 . 3 7 5 2 . 1 6 02 . 0 0 01 . 7 5 0 2 . 5 3 52 . 3 7 52 . 1 2 5 2 . 7 8 52 . 6 2 52 . 3 7 5 3 . 0 3 52 . 8 7 52 . 6 2 5 3 . 4 1 03 . 2 5 03 . 0 0 0 3 . 7 8 53 . 6 2 53 . 3 7 5 4 . 0 3 53 . 8 7 53 . 6 2 5 4 . 1 6 04 . 0 0 03 . 7 5 0 4 . 6 6 04 . 5 0 04 . 2 5 0 4 . 7 8 54 . 6 2 54 . 3 7 5 5 . 2 8 55 . 1 2 54 . 8 7 5 5 . 6 6 05 . 5 0 05 . 2 5 0 6 . 5 3 56 . 3 7 56 . 1 2 5 NOTE: 144 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Optional stacking designs are available (consult Tyco Electronics). 1 5 5 . 5 81 6 1 . 9 31 6 5 . 9 9 C 7 D 5 0 P F 2 9 0 4 3C 7 D 5 0 P F 2 9 1 3 3C 7 D 5 0 P F 2 9 0 1 35 0 1 3 3 . 3 51 3 9 . 7 01 4 3 . 7 6 C 7 D 4 3 P F 2 9 0 4 3C 7 D 4 3 P F 2 9 1 3 3C 7 D 4 3 P F 2 9 0 1 34 3 1 2 3 . 8 31 3 0 . 1 81 3 4 . 2 4 C 7 D 4 0 P F 2 9 0 4 3C 7 D 4 0 P F 2 9 1 3 3C 7 D 4 0 P F 2 9 0 1 34 0 1 1 1 . 1 31 1 7 . 4 81 2 1 . 5 4 C 7 D 3 6 P F 2 9 0 4 3C 7 D 3 6 P F 2 9 1 3 3C 7 D 3 6 P F 2 9 0 1 33 6 1 0 7 . 9 51 1 4 . 3 01 1 8 . 3 6 C 7 D 3 5 P F 2 9 0 4 3C 7 D 3 5 P F 2 9 1 3 3C 7 D 3 5 P F 2 9 0 1 33 5 9 5 . 2 51 0 1 . 6 01 0 5 . 6 6 C 7 D 3 1 P F 2 9 0 4 3C 7 D 3 1 P F 2 9 1 3 3C 7 D 3 1 P F 2 9 0 1 33 1 9 2 . 0 89 8 . 4 31 0 2 . 4 9 C 7 D 3 0 P F 2 9 0 4 3C 7 D 3 0 P F 2 9 1 3 3C 7 D 3 0 P F 2 9 0 1 33 0 8 5 . 7 39 2 . 0 89 6 . 1 4 C 7 D 2 8 P F 2 9 0 4 3C 7 D 2 8 P F 2 9 1 3 3C 7 D 2 8 P F 2 9 0 1 32 8 7 6 . 2 08 2 . 5 58 6 . 6 1 C 7 D 2 5 P F 2 9 0 4 3C 7 D 2 5 P F 2 9 1 3 3C 7 D 2 5 P F 2 9 0 1 32 5 6 6 . 6 87 3 . 0 37 7 . 0 9 C 7 D 2 2 P F 2 9 0 4 3C 7 D 2 2 P F 2 9 1 3 3C 7 D 2 2 P F 2 9 0 1 32 2 6 0 . 3 36 6 . 6 87 0 . 7 4 C 7 D 2 0 P F 2 9 0 4 3C 7 D 2 0 P F 2 9 1 3 3C 7 D 2 0 P F 2 9 0 1 32 0 5 3 . 9 86 0 . 3 36 4 . 3 9 C 7 D 1 8 P F 2 9 0 4 3C 7 D 1 8 P F 2 9 1 3 3C 7 D 1 8 P F 2 9 0 1 31 8 4 4 . 4 55 0 . 8 05 4 . 8 6 C 7 D 1 5 P F 2 9 0 4 3C 7 D 1 5 P F 2 9 1 3 3C 7 D 1 5 P F 2 9 0 1 31 5 3 4 . 9 34 1 . 2 84 5 . 3 4 C 7 D 1 2 P F 2 9 0 4 3C 7 D 1 2 P F 2 9 1 3 3C 7 D 1 2 P F 2 9 0 1 31 2 2 8 . 5 83 4 . 9 33 8 . 9 9 C 7 D 1 0 P F 2 9 0 4 3C 7 D 1 0 P F 2 9 1 3 3C 7 D 1 0 P F 2 9 0 1 31 0 1 5 . 8 82 2 . 2 32 6 . 2 9 C 7 D 0 6 P F 2 9 0 4 3C 7 D 0 6 P F 2 9 1 3 3C 7 D 0 6 P F 2 9 0 1 3 1 5 5 . 5 81 6 1 . 9 31 6 5 . 9 9 C 7 D 5 0 P F 2 9 0 4 2C 7 D 5 0 P F 2 9 1 3 2C 7 D 5 0 P F 2 9 0 1 25 0 1 3 3 . 3 51 3 9 . 7 01 4 3 . 7 6 C 7 D 4 3 P F 2 9 0 4 2C 7 D 4 3 P F 2 9 1 3 2C 7 D 4 3 P F 2 9 0 1 24 3 1 2 3 . 8 31 3 0 . 1 81 3 4 . 2 4 C 7 D 4 0 P F 2 9 0 4 2C 7 D 4 0 P F 2 9 1 3 2C 7 D 4 0 P F 2 9 0 1 24 0 1 1 1 . 1 31 1 7 . 4 81 2 1 . 5 4 C 7 D 3 6 P F 2 9 0 4 2C 7 D 3 6 P F 2 9 1 3 2C 7 D 3 6 P F 2 9 0 1 23 6 1 0 7 . 9 51 1 4 . 3 01 1 8 . 3 6 C 7 D 3 5 P F 2 9 0 4 2C 7 D 3 5 P F 2 9 1 3 2C 7 D 3 5 P F 2 9 0 1 23 5 9 5 . 2 51 0 1 . 6 01 0 5 . 6 6 C 7 D 3 1 P F 2 9 0 4 2C 7 D 3 1 P F 2 9 1 3 2C 7 D 3 1 P F 2 9 0 1 23 1 9 2 . 0 89 8 . 4 31 0 2 . 4 9 C 7 D 3 0 P F 2 9 0 4 2C 7 D 3 0 P F 2 9 1 3 2C 7 D 3 0 P F 2 9 0 1 23 0 8 5 . 7 39 2 . 0 89 6 . 1 4 C 7 D 2 8 P F 2 9 0 4 2C 7 D 2 8 P F 2 9 1 3 2C 7 D 2 8 P F 2 9 0 1 22 8 7 6 . 2 08 2 . 5 58 6 . 6 1 C 7 D 2 5 P F 2 9 0 4 2C 7 D 2 5 P F 2 9 1 3 2C 7 D 2 5 P F 2 9 0 1 22 5 6 6 . 6 87 3 . 0 37 7 . 0 9 C 7 D 2 2 P F 2 9 0 4 2C 7 D 2 2 P F 2 9 1 3 2C 7 D 2 2 P F 2 9 0 1 22 2 6 0 . 3 36 6 . 6 87 0 . 7 4 C 7 D 2 0 P F 2 9 0 4 2C 7 D 2 0 P F 2 9 1 3 2C 7 D 2 0 P F 2 9 0 1 22 0 5 3 . 9 86 0 . 3 36 4 . 3 9 C 7 D 1 8 P F 2 9 0 4 2C 7 D 1 8 P F 2 9 1 3 2C 7 D 1 8 P F 2 9 0 1 21 8 4 4 . 4 55 0 . 8 05 4 . 8 6 C 7 D 1 5 P F 2 9 0 4 2C 7 D 1 5 P F 2 9 1 3 2C 7 D 1 5 P F 2 9 0 1 21 5 3 4 . 9 34 1 . 2 84 5 . 3 4 C 7 D 1 2 P F 2 9 0 4 2C 7 D 1 2 P F 2 9 1 3 2C 7 D 1 2 P F 2 9 0 1 21 2 2 8 . 5 83 4 . 9 33 8 . 9 9 C 7 D 1 0 P F 2 9 0 4 2C 7 D 1 0 P F 2 9 1 3 2C 7 D 1 0 P F 2 9 0 1 21 0 1 5 . 8 82 2 . 2 32 6 . 2 9 C 7 D 0 6 P F 2 9 0 4 2C 7 D 0 6 P F 2 9 1 3 2C 7 D 0 6 P F 2 9 0 1 2 Card Edge Connectors (Board-to-Board, Wire-to-Board) .156 x .200 [3.18 x 5.08] Centerline without Standoffs Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., File No. E60980 .054 to .071 Accepts Thk. PC Board [1.37 to 1.80] nCertified by Canadian Standards . 1 2 0±. 0 0 3 Association, [3.05±.25] .300[7.62] Point ofCard Slot File No. LR49571 .350[8.89] ContactDepth .415[10.54] Physical Properties: Insulation Resistance— 5000 megohms minimum. Contact Retention Into PCB— 5 lbs. [356 N] J Insertion/Withdrawal Force— 8 oz./2 oz. [35.6 N/ 8.9 N] average contact pair using .0620 [1.57] steel .200 blade. [5.08] Insulator Body—Glass filled thermoplastic, UL rating 94V-O A Color—Black Contacts—High strength copper alloy. B Contact Plating—.000050 [0.00127] nickel underplate with .000030 C [0.00076] gold in the mating area, tin/lead on tails, .000100 [0.00254] .020 minimumContact Gap [.51] .365 Ref. [9.27] Electrical Properties: Operating Voltage—1500 VDC (sea level) .156 [3.96] Current Rating—3 Amperes Initial Contact Resistance— 10 milliohms .550 Environmental Properties: [13.97] Operating Temperature— -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 J Vibration— MIL-STD-202, method 204 .156 .025 Application Tooling:Sq. Typ. [3.96][.64] Insertion Tool—page 150 C Related Product Data: Daughter Card Edge Pattern— page 57 Dim C .040±.003 Dia. [1.02±.08] .200 [5.08] .156 [3.96]Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 145 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .156 [3.18] Centerline/.200 [5.08] Row-to-Row without Standoffs D i m e n s i o n s No. of Dual Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.84] Card Slot Depth .415 [10.54] Card Slot Depth .670 [17.02] Tail Length (DIM “J”) 1 . 2 2 11 . 1 0 00 . 7 8 0 6 1 . 8 4 51 . 7 2 41 . 4 0 4 2 . 1 5 72 . 0 3 61 . 7 1 6 2 . 6 2 52 . 5 0 42 . 1 8 4 3 . 0 9 32 . 9 7 22 . 6 5 2 3 . 4 0 53 . 2 8 42 . 9 6 4 3 . 7 1 73 . 5 9 63 . 2 7 6 4 . 1 8 54 . 0 6 43 . 7 4 4 4 . 6 5 34 . 5 3 24 . 2 1 2 4 . 9 6 54 . 8 4 44 . 5 2 4 5 . 1 2 15 . 0 0 04 . 6 8 0 5 . 7 4 55 . 6 2 45 . 3 0 4 5 . 9 0 15 . 7 8 05 . 4 6 0 6 . 5 2 56 . 4 0 46 . 0 8 5 6 . 9 9 36 . 8 7 26 . 5 5 2 .180 [4.57] Tail Length (DIM “J”) 1 . 2 2 11 . 1 0 00 . 7 8 0 6 1 . 8 4 51 . 7 2 41 . 4 0 4 2 . 1 5 72 . 0 3 61 . 7 1 6 2 . 6 2 52 . 5 0 42 . 1 8 4 3 . 0 9 32 . 9 7 22 . 6 5 2 3 . 4 0 53 . 2 8 42 . 9 6 4 3 . 7 1 73 . 5 9 63 . 2 7 6 4 . 1 8 54 . 0 6 43 . 7 4 4 4 . 6 5 34 . 5 3 24 . 2 1 2 4 . 9 6 54 . 8 4 44 . 5 2 4 5 . 1 2 15 . 0 0 04 . 6 8 0 5 . 7 4 55 . 6 2 45 . 3 0 4 5 . 9 0 15 . 7 8 05 . 4 6 0 6 . 5 2 56 . 4 0 46 . 0 8 5 6 . 9 9 36 . 8 7 26 . 5 5 2 146 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 6 6 . 4 21 7 4 . 5 51 7 7 . 6 2 C 6 D 4 3 P F 2 9 0 2 3C 6 D 4 3 P F 2 9 1 4 3C 6 D 4 3 P F 2 9 0 3 34 3 1 5 4 . 5 61 6 2 . 6 61 6 5 . 7 4 C 6 D 4 0 P F 2 9 0 2 3C 6 D 4 0 P F 2 9 1 4 3C 6 D 4 0 P F 2 9 0 3 34 0 1 3 8 . 6 81 4 6 . 8 11 4 9 . 8 9 C 6 D 3 6 P F 2 9 0 2 3C 6 D 3 6 P F 2 9 1 4 3C 6 D 3 6 P F 2 9 0 3 33 6 1 3 4 . 7 21 4 2 . 8 51 4 5 . 9 2 C 6 D 3 5 P F 2 9 0 2 3C 6 D 3 5 P F 2 9 1 4 3C 6 D 3 5 P F 2 9 0 3 33 5 1 1 8 . 8 71 2 7 . 0 01 3 0 . 0 7 C 6 D 3 1 P F 2 9 0 2 3C 6 D 3 1 P F 2 9 1 4 3C 6 D 3 1 P F 2 9 0 3 33 1 1 1 4 . 9 11 2 3 . 0 41 2 6 . 1 1 C 6 D 3 0 P F 2 9 0 2 3C 6 D 3 0 P F 2 9 1 4 3C 6 D 3 0 P F 2 9 0 3 33 0 1 0 6 . 9 81 1 5 . 1 11 1 8 . 1 9 C 6 D 2 8 P F 2 9 0 2 3C 6 D 2 8 P F 2 9 1 4 3C 6 D 2 8 P F 2 9 0 3 32 8 9 5 . 1 01 0 3 . 2 31 0 6 . 3 0 C 6 D 2 5 P F 2 9 0 2 3C 6 D 2 5 P F 2 9 1 4 3C 6 D 2 5 P F 2 9 0 3 32 5 8 3 . 2 19 1 . 3 49 4 . 4 1 C 6 D 2 2 P F 2 9 0 2 3C 6 D 2 2 P F 2 9 1 4 3C 6 D 2 2 P F 2 9 0 3 32 2 7 5 . 2 98 3 . 4 18 6 . 4 9 C 6 D 2 0 P F 2 9 0 2 3C 6 D 2 0 P F 2 9 1 4 3C 6 D 2 0 P F 2 9 0 3 32 0 6 7 . 3 67 5 . 4 97 8 . 5 6 C 6 D 1 8 P F 2 9 0 2 3C 6 D 1 8 P F 2 9 1 4 3C 6 D 1 8 P F 2 9 0 3 31 8 5 5 . 4 76 3 . 6 06 6 . 6 8 C 6 D 1 5 P F 2 9 0 2 3C 6 D 1 5 P F 2 9 1 4 3C 6 D 1 5 P F 2 9 0 3 31 5 4 3 . 5 95 1 . 7 15 4 . 7 9 C 6 D 1 2 P F 2 9 0 2 3C 6 D 1 2 P F 2 9 1 4 3C 6 D 1 2 P F 2 9 0 3 31 2 3 5 . 6 64 3 . 7 94 6 . 8 6 C 6 D 1 0 P F 2 9 0 2 3C 6 D 1 0 P F 2 9 1 4 3C 6 D 1 0 P F 2 9 0 3 31 0 1 9 . 8 12 7 . 9 43 1 . 0 1 C 6 D 0 6 P F 2 9 0 2 3C 6 D 0 6 P F 2 9 1 4 3C 6 D 0 6 P F 2 9 0 3 3 1 6 6 . 4 21 7 4 . 5 51 7 7 . 6 2 C 6 D 4 3 P F 2 9 0 2 2C 6 D 4 3 P F 2 9 1 4 2C 6 D 4 3 P F 2 9 0 3 24 3 1 5 4 . 5 61 6 2 . 6 61 6 5 . 7 4 C 6 D 4 0 P F 2 9 0 2 2C 6 D 4 0 P F 2 9 1 4 2C 6 D 4 0 P F 2 9 0 3 24 0 1 3 8 . 6 81 4 6 . 8 11 4 9 . 8 9 C 6 D 3 6 P F 2 9 0 2 2C 6 D 3 6 P F 2 9 1 4 2C 6 D 3 6 P F 2 9 0 3 23 6 1 3 4 . 7 21 4 2 . 8 51 4 5 . 9 2 C 6 D 3 5 P F 2 9 0 2 2C 6 D 3 5 P F 2 9 1 4 2C 6 D 3 5 P F 2 9 0 3 23 5 1 1 8 . 8 71 2 7 . 0 01 3 0 . 0 7 C 6 D 3 1 P F 2 9 0 2 2C 6 D 3 1 P F 2 9 1 4 2C 6 D 3 1 P F 2 9 0 3 23 1 1 1 4 . 9 11 2 3 . 0 41 2 6 . 1 1 C 6 D 3 0 P F 2 9 0 2 2C 6 D 3 0 P F 2 9 1 4 2C 6 D 3 0 P F 2 9 0 3 23 0 1 0 6 . 9 81 1 5 . 1 11 1 8 . 1 9 C 6 D 2 8 P F 2 9 0 2 2C 6 D 2 8 P F 2 9 1 4 2C 6 D 2 8 P F 2 9 0 3 22 8 9 5 . 1 01 0 3 . 2 31 0 6 . 3 0 C 6 D 2 5 P F 2 9 0 2 2C 6 D 2 5 P F 2 9 1 4 2C 6 D 2 5 P F 2 9 0 3 22 5 8 3 . 2 19 1 . 3 49 4 . 4 1 C 6 D 2 2 P F 2 9 0 2 2C 6 D 2 2 P F 2 9 1 4 2C 6 D 2 2 P F 2 9 0 3 22 2 7 5 . 2 98 3 . 4 18 6 . 4 9 C 6 D 2 0 P F 2 9 0 2 2C 6 D 2 0 P F 2 9 1 4 2C 6 D 2 0 P F 2 9 0 3 22 0 6 7 . 3 67 5 . 4 97 8 . 5 6 C 6 D 1 8 P F 2 9 0 2 2C 6 D 1 8 P F 2 9 1 4 2C 6 D 1 8 P F 2 9 0 3 21 8 5 5 . 4 76 3 . 6 06 6 . 6 8 C 6 D 1 5 P F 2 9 0 2 2C 6 D 1 5 P F 2 9 1 4 2C 6 D 1 5 P F 2 9 0 3 21 5 4 3 . 5 95 1 . 7 15 4 . 7 9 C 6 D 1 2 P F 2 9 0 2 2C 6 D 1 2 P F 2 9 1 4 2C 6 D 1 2 P F 2 9 0 3 21 2 3 5 . 6 64 3 . 7 94 6 . 8 6 C 6 D 1 0 P F 2 9 0 2 2C 6 D 1 0 P F 2 9 1 4 2C 6 D 1 0 P F 2 9 0 3 21 0 1 9 . 8 12 7 . 9 43 1 . 0 1 C 6 D 0 6 P F 2 9 0 2 2C 6 D 0 6 P F 2 9 1 4 2C 6 D 0 6 P F 2 9 0 3 2 Card Edge Connectors (Board-to-Board, Wire-to-Board) .156 x .200 [3.18 x 5.08] Centerline with Standoffs Product Facts nRecognized under the Component Program of Underwriters Laboratories Inc., .054 to .071 File No. E60980Accepts Thk. PC Board [1.37 to 1.80] nCertified by Canadian . 1 2 0±. 0 0 3 Standards [3.05±.25] Association, .300[7.62] Point ofCard Slot .350[8.89] File No. LR49571ContactDepth .415[10.54] Physical Properties: Insulation Resistance— 5000 megohms minimum. Contact Retention Into PCB—5 lbs. J [356 N] Insertion/Withdrawal Force— 8 oz./2 oz. [35.6 N/ 8.9 N] average .200 contact pair using .0620 [1.57] steel [5.08] blade. Insulator Body—Glass filled thermoplastic, UL rating 94V-O A Color—Black B Contacts—High strength copper alloy. Contact Plating—.000050 [0.00127] C nickel underplate with .000030 [0.00076] gold in the mating area, .020 tin/lead on tails, .000100 [0.00254] Contact Gap [.51] minimum .365 Ref. [9.27] Electrical Properties: Operating Voltage—1500 VDC .156 (sea level)[3.96] Current Rating—3 Amperes Initial Contact Resistance— 10 milliohms .610 Environmental Properties: [15.49] Operating Temperature— -55˚C to +125˚C Temperature Cycling— MIL-STD-202 method 107 J Vibration— MIL-STD-202, method 204 .156 .025 Sq. Typ. [3.96][.64] Application Tooling: C Insertion Tool—page 150 Related Product Data: Daughter Card Edge Pattern— Dim C page 57 .040±.003 Dia. [1.02±.08] .200 [5.08] .156 [3.96]Note: Open ends and open/closed ends are available. Consult Tyco E l e c t r o n i c s . 147 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Ordering Information .156 [3.18] Centerline/.200 [5.08] Row-to-Row with Standoffs D i m e n s i o n s No. of Dual Acquired Part Numbers Readout Positions A B C .300 [7.62] Card Slot Depth .350 [8.89] Card Slot Depth .415 [10.54] Card Slot Depth .670 [17.02] Tail Length (DIM “J”) 1 . 2 2 11 . 1 0 00 . 7 8 0 6 1 . 8 4 51 . 7 2 41 . 4 0 4 2 . 1 5 72 . 0 3 61 . 7 1 6 2 . 6 2 52 . 5 0 42 . 1 8 4 3 . 0 9 32 . 9 7 22 . 6 5 2 3 . 4 0 53 . 2 8 42 . 9 6 4 3 . 7 1 73 . 5 9 63 . 2 7 6 4 . 1 8 54 . 0 6 43 . 7 4 4 4 . 6 5 34 . 5 3 24 . 2 1 2 4 . 9 6 54 . 8 4 44 . 5 2 4 5 . 1 2 15 . 0 0 04 . 6 8 0 5 . 7 4 55 . 6 2 45 . 3 0 4 5 . 9 0 15 . 7 8 05 . 4 6 0 6 . 5 2 56 . 4 0 46 . 0 8 5 6 . 9 9 36 . 8 7 26 . 5 5 2 .180 [4.57] Tail Length (DIM “J”) 1 . 2 2 11 . 1 0 00 . 7 8 0 6 1 . 8 4 51 . 7 2 41 . 4 0 4 2 . 1 5 72 . 0 3 61 . 7 1 6 2 . 6 2 52 . 5 0 42 . 1 8 4 3 . 0 9 32 . 9 7 22 . 6 5 2 3 . 4 0 53 . 2 8 42 . 9 6 4 3 . 7 1 73 . 5 9 63 . 2 7 6 4 . 1 8 54 . 0 6 43 . 7 4 4 4 . 6 5 34 . 5 3 24 . 2 1 2 4 . 9 6 54 . 8 4 44 . 5 2 4 5 . 1 2 15 . 0 0 04 . 6 8 0 5 . 7 4 55 . 6 2 45 . 3 0 4 5 . 9 0 15 . 7 8 05 . 4 6 0 6 . 5 2 56 . 4 0 46 . 0 8 5 6 . 9 9 36 . 8 7 26 . 5 5 2 148 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 6 6 . 4 21 7 4 . 5 51 7 7 . 6 2 C 6 D 4 3 P F 2 9 0 4 3C 6 D 4 3 P F 2 9 1 3 3C 6 D 4 3 P F 2 9 0 1 34 3 1 5 4 . 5 61 6 2 . 6 61 6 5 . 7 4 C 6 D 4 0 P F 2 9 0 4 3C 6 D 4 0 P F 2 9 1 3 3C 6 D 4 0 P F 2 9 0 1 34 0 1 3 8 . 6 81 4 6 . 8 11 4 9 . 8 9 C 6 D 3 6 P F 2 9 0 4 3C 6 D 3 6 P F 2 9 1 3 3C 6 D 3 6 P F 2 9 0 1 33 6 1 3 4 . 7 21 4 2 . 8 51 4 5 . 9 2 C 6 D 3 5 P F 2 9 0 4 3C 6 D 3 5 P F 2 9 1 3 3C 6 D 3 5 P F 2 9 0 1 33 5 1 1 8 . 8 71 2 7 . 0 01 3 0 . 0 7 C 6 D 3 1 P F 2 9 0 4 3C 6 D 3 1 P F 2 9 1 3 3C 6 D 3 1 P F 2 9 0 1 33 1 1 1 4 . 9 11 2 3 . 0 41 2 6 . 1 1 C 6 D 3 0 P F 2 9 0 4 3C 6 D 3 0 P F 2 9 1 3 3C 6 D 3 0 P F 2 9 0 1 33 0 1 0 6 . 9 81 1 5 . 1 11 1 8 . 1 9 C 6 D 2 8 P F 2 9 0 4 3C 6 D 2 8 P F 2 9 1 3 3C 6 D 2 8 P F 2 9 0 1 32 8 9 5 . 1 01 0 3 . 2 31 0 6 . 3 0 C 6 D 2 5 P F 2 9 0 4 3C 6 D 2 5 P F 2 9 1 3 3C 6 D 2 5 P F 2 9 0 1 32 5 8 3 . 2 19 1 . 3 49 4 . 4 1 C 6 D 2 2 P F 2 9 0 4 3C 6 D 2 2 P F 2 9 1 3 3C 6 D 2 2 P F 2 9 0 1 32 2 7 5 . 2 98 3 . 4 18 6 . 4 9 C 6 D 2 0 P F 2 9 0 4 3C 6 D 2 0 P F 2 9 1 3 3C 6 D 2 0 P F 2 9 0 1 32 0 6 7 . 3 67 5 . 4 97 8 . 5 6 C 6 D 1 8 P F 2 9 0 4 3C 6 D 1 8 P F 2 9 1 3 3C 6 D 1 8 P F 2 9 0 1 31 8 5 5 . 4 76 3 . 6 06 6 . 6 8 C 6 D 1 5 P F 2 9 0 4 3C 6 D 1 5 P F 2 9 1 3 3C 6 D 1 5 P F 2 9 0 1 31 5 4 3 . 5 95 1 . 7 15 4 . 7 9 C 6 D 1 2 P F 2 9 0 4 3C 6 D 1 2 P F 2 9 1 3 3C 6 D 1 2 P F 2 9 0 1 31 2 3 5 . 6 64 3 . 7 94 6 . 8 6 C 6 D 1 0 P F 2 9 0 4 3C 6 D 1 0 P F 2 9 1 3 3C 6 D 1 0 P F 2 9 0 1 31 0 1 9 . 8 12 7 . 9 43 1 . 0 1 C 6 D 0 6 P F 2 9 0 4 3C 6 D 0 6 P F 2 9 1 3 3C 6 D 0 6 P F 2 9 0 1 3 1 6 6 . 4 21 7 4 . 5 51 7 7 . 6 2 C 6 D 4 3 P F 2 9 0 4 2C 6 D 4 3 P F 2 9 1 3 2C 6 D 4 3 P F 2 9 0 1 24 3 1 5 4 . 5 61 6 2 . 6 61 6 5 . 7 4 C 6 D 4 0 P F 2 9 0 4 2C 6 D 4 0 P F 2 9 1 3 2C 6 D 4 0 P F 2 9 0 1 24 0 1 3 8 . 6 81 4 6 . 8 11 4 9 . 8 9 C 6 D 3 6 P F 2 9 0 4 2C 6 D 3 6 P F 2 9 1 3 2C 6 D 3 6 P F 2 9 0 1 23 6 1 3 4 . 7 21 4 2 . 8 51 4 5 . 9 2 C 6 D 3 5 P F 2 9 0 4 2C 6 D 3 5 P F 2 9 1 3 2C 6 D 3 5 P F 2 9 0 1 23 5 1 1 8 . 8 71 2 7 . 0 01 3 0 . 0 7 C 6 D 3 1 P F 2 9 0 4 2C 6 D 3 1 P F 2 9 1 3 2C 6 D 3 1 P F 2 9 0 1 23 1 1 1 4 . 9 11 2 3 . 0 41 2 6 . 1 1 C 6 D 3 0 P F 2 9 0 4 2C 6 D 3 0 P F 2 9 1 3 2C 6 D 3 0 P F 2 9 0 1 23 0 1 0 6 . 9 81 1 5 . 1 11 1 8 . 1 9 C 6 D 2 8 P F 2 9 0 4 2C 6 D 2 8 P F 2 9 1 3 2C 6 D 2 8 P F 2 9 0 1 22 8 9 5 . 1 01 0 3 . 2 31 0 6 . 3 0 C 6 D 2 5 P F 2 9 0 4 2C 6 D 2 5 P F 2 9 1 3 2C 6 D 2 5 P F 2 9 0 1 22 5 8 3 . 2 19 1 . 3 49 4 . 4 1 C 6 D 2 2 P F 2 9 0 4 2C 6 D 2 2 P F 2 9 1 3 2C 6 D 2 2 P F 2 9 0 1 22 2 7 5 . 2 98 3 . 4 18 6 . 4 9 C 6 D 2 0 P F 2 9 0 4 2C 6 D 2 0 P F 2 9 1 3 2C 6 D 2 0 P F 2 9 0 1 2 2 0 6 7 . 3 67 5 . 4 97 8 . 5 6 C 6 D 1 8 P F 2 9 0 4 2C 6 D 1 8 P F 2 9 1 3 2C 6 D 1 8 P F 2 9 0 1 21 8 5 5 . 4 76 3 . 6 06 6 . 6 8 C 6 D 1 5 P F 2 9 0 4 2C 6 D 1 5 P F 2 9 1 3 2C 6 D 1 5 P F 2 9 0 1 21 5 4 3 . 5 95 1 . 7 15 4 . 7 9 C 6 D 1 2 P F 2 9 0 4 2C 6 D 1 2 P F 2 9 1 3 2C 6 D 1 2 P F 2 9 0 1 21 2 3 5 . 6 64 3 . 7 94 6 . 8 6 C 6 D 1 0 P F 2 9 0 4 2C 6 D 1 0 P F 2 9 1 3 2C 6 D 1 0 P F 2 9 0 1 21 0 1 9 . 8 12 7 . 9 43 1 . 0 1 C 6 D 0 6 P F 2 9 0 4 2C 6 D 0 6 P F 2 9 1 3 2C 6 D 0 6 P F 2 9 0 1 2 Card Edge Connectors (Board-to-Board, Wire-to-Board) Press-Fit Application Tooling Tyco Electronics offers a BMEP 1K/2K Servo Electric complete line of servo-elec- Press tric driven presses for the • 1000 or 2000 lb force [4.5 application of press-fit con- or 9 kN] nectors. Each system fea- • 12” [305 mm] throat depth tures a PC controlled servo electric drive for precise • Compact footprint – 16” x application and monitoring 24” [406 x 610 mm] of force, speed, and press • Force resolution of height. The entire process approximately 1 lb [4.4 N] is data driven to provide for delicate press applica- flexible programming and tions. automatic set-up. SPC analysis is provided for each connector pressed to assure the quality of every application. BMEP 3T/5T Benchtop Electric Servo Press • 3 or 5 tons force [27 or 44 kN] • 18” x 24” [460 x 610 mm] PCB capacity • Compact footprint – 24” x 48” [610 x 1220 mm] • Midrange force and board size capacity in a bench- top unit. MEP 6T/12 T Manual Electric Servo Press • 6 or 12 tons force [53 or 107 kN] • 24” x 36” [610 x 914 mm] PCB capacity • Self-contained, portable unit • Compact, manual unit capable of handling large boards and high force applications. Automatic Pick, Place and Press (AP3) • 8 tons force [71 kN] • 18” x 30” [457 x 762 mm] PCB capacity • SMEMA compatible unit for automatic pick, place and press of connectors and odd-from compo- nents. • Vision system for pin inspection prior to place- ment. 149 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Press-Fit Card Edge Insertion Tools Ordering Information Tool Part Replacement Blade Center-to Connector Max. No. Of Number Part Number Center Prefix Positions Acquired P/N TYCO Acquired P/N Tyco .100 x .100 C170983363-1437266-5982931437274-1 2.54 x 2.54 .100 x .100 C110098341—982931437274-1 2.54 x 2.54 .156 x .200 C643982311-1437266-1982061437266-8 3.96 x 5.08 .125 x .250 C750982301-1437266-0982061437266-8 3.18 x 6.35 .100 x .200 C870982241-1437266-9982061437266-8 2.54 x 5.08 .100 x .200 2.54 x 5.08W870982361-1490560-1982381490563-1 (Full Scoop) .100 x .200 2.54 x 5.08W835982361-1490560-2982381490563-1 (Full Scoop) 150 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Press-Fit Card Edge Removal Tool Kits Description Removal tool kits include: impact tools, removal tips for tail lengths ranging from .180 in. [4.57] to .680 in. [17.27] Kits for .100" x .200" [2.54 x 5.08] Series Card Edge connectors include the insertion tip. Ordering Information Acquired Tyco Center x Row Prefix Kit Number Kit Number .156 x .200 C698180021437266-3 3.96 x 5.08 .125 x .250 C798180021437266-3 3.18 x 6.35 .100 x .200 C898180021437266-3 2.54 x 5.08 .100 x .100 C198180041437266-4 2.54 x 2.54 .100 x .200 2.54 x 5.08W898180051437266-5 Wide Full Scoop Ordering Information R e p l a c e m e n tT y c o Applies to Kit No. I t e m D e s c r i p t i o nP a r tP a r t N o . 9 8 1 8 0 0 19 8 1 8 0 0 19 8 1 8 0 0 39 8 1 8 0 0 49 8 1 8 0 0 5 N u m b e rN u m b e r 1Impact ToolÖÖÖÖÖ 2ÖÖÖÖÖ 3Removal Tip - . 3 7 8 / . 4 7 5 ÖÖÖÖ 4Removal Tip - . 6 7 0 / . 6 8 0 ÖÖÖÖ— 6Ö Removal Tip - . 5 5 0 / . 6 2 5 Ö Ö Ö 151 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 3 7 2 6 0 - 79 8 3 6 7 0 2Insertion Tip - W8 Series PF1 2 1 4 3 7 2 6 0 - 69 8 3 6 3 0 1Insertion Tip - C1 Series PF1 1 1 3 . 9 7 / 1 5 . 8 8 1 4 3 7 2 6 0 - 59 8 2 0 3 0 5 T a i l1 0 3 - 1 4 3 7 2 6 6 - 99 8 3 6 7 0 1Insertion Tip - C6, 7 & 8 PF 1 7 . 0 2 / 1 7 . 2 7 9 8 2 0 3 0 3 T a i l 9 . 6 0 / 1 2 . 0 7 1 4 3 7 2 6 0 - 49 8 2 0 3 0 2 T a i l 1 4 3 7 2 6 6 - 69 8 2 0 3 0 1Removal Tip - .180 [4.57] Tail 1 4 3 7 2 6 6 - 79 8 2 0 4 0 1 Card Edge Connectors (Board-to-Board, Wire-to-Board) Wire-to-Board Connectors Except for DUO-TYNE flag Crimp Snap Twin Leaf High Current Connectors DUO-TYNE Flag Connectors connectors, which are Connectors (Pages 173-176) (Pages 177-180) exclusively for wire-to-board (Pages 154-163) Designed for a current These economical connec- application, the connectors These connectors are capability of up to 30 tors are designed to meet presented in this section designed for high density amperes, these connectors the quality and reliability are primarily wire-to-board wire-to-board applications are an economical answer requirements of industries connectors, but do have and feature bifurcated, to the costly problem of such as appliance controls, some board-to-board capa- crimp and solder eyelet interconnecting high current vending machine subasem- bilities. These connectors contacts on .100 [2.54] and printed circuitry. Styles are blies, television, stereo, are available in a wide .125 [3.18] centers. Design available for wire-to-board business machines and range of styles to suit flexibility allows the cus- and board-to-board appli- other areas with similar con- almost any wire-to-board tomer to save by purchas- cations. Contacts are on trol needs. The right-angle application. This versatile ing only enough contacts .312 [7.92] centers. design of the connector connector family features for his circuit design permits close-quarter snap-in contacts of various requirements. Contact cabling. Contacts are configurations including styles include crimp, solder doubly locked in when crimp, post, eyelet and eyelet and vertical and a PC board is inserted. solder types. right-angle posts, in a variety of sizes. Wire-to-board crimp, snap-in contacts are easily AMP-LEAF Connectors inserted into the connector (Pages 164-172) housing and are furnished These connectors are for in reel-fed strip form for single- or double-sided automatic machine applica- printed circuit boards. tion and loose piece for Snap-in contacts lock in hand tool termination. The place on .156 [3.96] cen- Wire-to-Board Printed ters, maintaining constant Circuit Board Connector pressure on circuit paths. family includes: Contact options are avail- able for precision crimped terminations and solder dip applications. 152 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Wire-to-Board Connector Selection Guide Crimp Snap AMP-LEAF Twin Leaf Connectors Connectors (Pages 154-163) (Pages 164-172) .175 .350[8.89].340[8.64] [4.45].437[11.10].350[8.89] .360[9.14] .375[9.53].087 .437[11.10][2.21] .485[12.32] .750 .700 [19.05] [17.78] .405 .375 [10.29][9.53] Centerlines .100 [2.54]X .125 [3.18]X .156 [3.96]X X .197 [5.00] .260 [6.60] .312 [7.92] Styles CrimpX X Right-Angle PostX X Wrap-Type PostX X Solder EyeletX X Solder TailX X Double SidedX X Single SidedX X High Current DUO-TYNE Flag Connectors Connectors (Pages 173-176) (Pages 177-180) .437 [11.10].578 [14.68].375 [9.53] .200 [5.08] .012 .967[0.30] [24.56].500 [12.70].567 [14.40] .240 [6.10]Centerlines .100 [2.54] .125 [3.18] .156 [3.96]X .197 [5.00] .260 [6.60] .312 [7.92]X Styles CrimpX X Right-Angle Post Wrap-Type Post Solder Eyelet Solder TailX Double SidedX X* Single Sided *Double-sided board; single readout. 153 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors Product Facts nCrimp snap-in, solder eye- let, .025 [0.64] square posted and right angle contacts on .100 [2.54], .125 [3.18] or .156 [3.96] centers nCustomer buys only enough contacts to meet circuit and retention requirements nContacts bifurcated for redundancy nSingle leaf version avail- able for higher contact normal forces nLow insertion forces nAccommodates AWG 16-28 2 [1.4-0.08 mm ] wire range and insulation diameters .035-.105 [0.89-2.67] nLarge variety of connector sizes nCavity identification on face of card slot and wire entry nHigh speed automatic machine terminations provide uniform reliability at lowest applied cost nRecognized under the The Crimp Snap Twin Leaf Design flexibility allows the Performance Specifications Component Program of Connector is designed customer to save by pur- Underwriters Contact Rating*: 5 amperes, especially for high density chasing only enough Laboratories Inc. continuous 3 amperes, max. (for .025 wire-to-board applications. contacts for the circuit File No. E28476 [0.64] posted contacts) Termination styles include requirements. Easy replace- Contact Resistance:nCertified by Canadian crimp, solder, posted and ability of each contact cuts 10 milliohms, max. Standards right angle, in a variety of repair cost in the event of Association Insulation Resistance: s i z e s . contact or wire damage. File No. LR 7189 5000 megohms (initial) 1000 megohms Voltage Rating: .100 [2.54] Centerline-1000 Vrms .125 [3.18] Centerline-1500 Vrms .156 [3.96] Centerline-1800 Vrms Insertion Force (per pair): Twin Leaf-10 oz. [2.78 N], max.; 7.6 oz. [2.11 N], avg. Non-Bifurcated Contacts- 20 oz. [5.57 N], max. Extraction Force (per pair): Twin Leaf-0.7 oz. [0.195 N], min.; 1.2 oz. [0.334 N], avg. Operating Temperature: -55°C to +105°C *Consult Tyco Electronics engi- neering when paralleling con- tacts for power applications. 154 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors (Continued) .104 Crimp, Snap-In Contacts[2.64].705 .060 [17.91][1.52] Material and Finish: Phosphor bronze, plated .000030 .705 [0.00076] nickel on entire contact, with [17.91] the addition of one of the following .030 [0.76]platings: Plating A—.000030 [0.00076] gold in Wire SizeC o n t a c t Applicator for Applicator for Contact Part Numbers C o n n e c t o rI n s u l a t i o nC o l o rH a n d R a n g eF i n i s hA M P - O - L E C T R I CS t r i p p e r / C r i m p e r mating area C e n t e r l i n e Dia. RangeC o d eT o o l 2 Loose Piece Strip Form A W G / m m( P l a t i n g )M a c h i n e *M a c h i n e Plating B—.000015 [0.00038] gold in A 583616-4 583616-2 mating area 28-24 .035-.055 B 583616-5 583616-3 466577-4 466912-1 Orange 90268-1 Plating C—.000050 [0.00127] gold in 0.08-0.2 0.89-1.40 C 583616-9 583616-8 mating area, with gold flash on remain- D 1-583616-1 1-583616-0 .100 der of contact 2.54 A 583853-5 583853-3 24-20 .048-.060 B 583853-4 583853-2 Plating D—.000015 [0.00038] gold in 466622-2 466919-1 Green 91535-1 0.2-0.6 1.22-1.52 C 583853-9 583853-8 mating area, with gold flash on remain- D 1-583853-1 1-583853-0 der of contact A 583616-4 583616-2 Note: Tin plating is available upon28-24 .035-.055 B 583616-5 583616-3 466577-4 466912-1 Orange 90268-1 request.0.08-0.2 0.89-1.40 C 583616-9 583616-8 D 1-583853-1 1-583853-0 A 583853-5 583853-3 24-20 .048-.060 B 583853-4 583853-2 Related Product Data: 466622-2 466919-1 Green 91535-1 .125 0.2-0.6 1.22-1.52 C 583853-9 583853-8 3.18 D 1-583853-1 1-583853-0 Performance Specifications— page 154 A 583649-6 583649-3 22-18 .049-.095 B 583649-5 583649-2 466713-2 466928-1 Violet 90264-1 0.3-0.9 1.24-2.41 Application Tooling—pages 184,185 C 583649-7 583649-4 Connector Housings—pages 157, 20-16 .073-.090 A 583875-6 583875-5 687775-2 — White 90285-1 0.6-1.4 1.85-2.29 C 583875-3 583875-2 159, 161 A 583616-4 583616-2 28-24 .035-.055 B 583616-5 583616-3 466577-4 466912-1 Orange 90268-1 0.08-0.2 0.89-1.40 C 583616-9 583616-8 Technical Documents: D 1-583616-1 1-583616-0 (pages 186, 187): A 583853-5 583853-3 24-20 .048-.060 B 583853-4 583853-2 Product Specification 466622-2 466919-1 Green 91535-1 0.2-0.6 1.22-1.52 C 583853-9 583853-8 108-9031 D 1-583853-1 1-583853-0 .156 3.96 Application Specification A 583649-6 583649-3 22-18 .049-.095 B 583649-5 583649-2 466713-2 466928-1 Violet 90264-1 114-9004 0.3-0.9 1.24-2.41 C 583649-7 583649-4 Instruction Sheets .073-.090 A 583875-6 583875-5 687775-2 — 408-7527, 408-7529, 408-7531, 1.85-2.29 C 583875-3 583875-2 20-16 White 90285-1 408-7551, 408-7556, 408-7583 0.6-1.4 .085-.105 B 583875-3 — — — Note:Only loose piece contacts2.16-2.67 vvv manufactured and supplied by Tyco Electronics are to be used with the.104 .705[2.64]hand tools listed on this page. No.060 [17.91] attempt should be made to produce[1.52] loose piece parts from a strip since special cutoff tooling is required to assure a properly functioning part. .705 .030[17.91] [0.76] Crimp, Snap-In Contacts, Wire SizeC o n t a c t Applicator for Applicator for Contact Part Numbers C o n n e c t o rI n s u l a t i o nC o l o rH a n d R a n g eF i n i s hA M P - O - L E C T R I CS t r i p p e r / C r i m p e r Non-Bifurcated C e n t e r l i n e Dia. RangeC o d eT o o l Loose Piece Strip Form 2 A W G / m m( P l a t i n g )M a c h i n e *M a c h i n e 28-24 .035-.055 A 531476-5 531476-4 466577-4 466912-1 Orange 90268-1 0.08-0.2 0.89-1.40 .100 Material and Finish: 2.54 24-20 .048-.060 A 531477-5 531477-4 466622-2 466919-1 Green 91535-1 Phosphor bronze, plated .000030 0.2-0.6 1.22-1.52 B 531477-4 531477-2 [0.00076] nickel on entire contact, with 28-24 .035-.055 A 531476-5 531476-4 466577-4 466912-1 Orange 90268-1 the addition of one of the following 0.08-0.2 0.89-1.40 platings: .125 24-20 .048-060 A 531477-5 531477-4 466622-2 466919-1 Green 91535-1 3.18 0.2-0.6 1.22-1.52 B 531477-3 531477-2 Plating A—.000030 [0.00076] gold in 22-18 .045-.095 mating area A — 531478-4 466713-2 466928-1 Violet 90264-1 0.3-0.9 1.14-2.41 Plating B—.000015 [0.00038] gold in 28-24 .035-.055 A 531476-5 531476-4 mating area 466577-4 466912-1 Orange 90268-1 0.08-0.2 0.89-1.40 B 531477-5 — Note:Tin plating is available upon .156 24-20 .048-.060 A 531477-5 531477-4request.466622-2 466919-1 Green 91535-1 3.96 0.2-0.6 1.22-1.52 B 531477-3 531477-2 22-18 .045-.095 A — 531478-4 466713-2 466928-1 Violet — 0.3-0.9 1.14-2.41 Related Product Data: (See above)*Applicators are for AMP-O-LECTRIC Model “K” machines. Consult Tyco Electronics for applicators for other bench machines and lead-making machines. 155 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors (Continued) Snap-In Solder Eyelet Contacts .060 Material and Finish: [1.52] Phosphor bronze, plated .000030 [0.00076] nickel on entire contact, with the addition of one of the following platings: Plating A—.000030 [0.00076] gold in mating area Plating B—.000015 [0.00038] gold in mating area .104 Solder eyelet portion is tin plated. .030[2.64] [0.76]Note:Tin plating of entire contact is available upon request. Contact Connector Part Related Product Data: Finish Centerline Numbers (Plating) Performance Specifications— .100A583854-3 page 154 2.54B583854-5 Connector Housings—pages 157, .125 A530245-3 159, 1613.18 Technical Documents (pages 186, 187): Product Specification 108-9031 Application Specification 114-9004 Instruction Sheets 408-7527, 408-7529 Snap-In Wrap Post .025 [0.64] Square Contacts Material and Finish: L Contact—Phosphor bronze, plated .000015 [0.00038] gold in mating area, with entire contact underplated .000030 Connector [0.00076] nickel Dimension Part Centerline L Numbers Post—Phosphor bronze, tin-plated Spacing Note:Tin plated contacts are avail-.451 583879-1 able upon request.11.46.100 2.54.535 583879-4 13.59 .125 .525 Related Product Data: 583884-1 3.1813.34 Performance Specifications— .156 .525 583884-1 page 1543.9613.34 Connector Housings—pages 157, 159, 161 Contact Extraction Tool Hand Tool Technical Documents: (pages 186, 187): Product Specification 108-9031 Application Specification 114-9004 Instruction Sheets 408-7527, 408-7529 156 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors, .100 [2.54] Centerline With Mounting Ears Without Mounting Ears H o u s i n g s Fit forFit for .128 .055-.070 .300 .055-.070 .100 .100[3.25][1.40-1.78][7.62][1.40-1.78]Material: Black glass-filled polyester, .100 .100 [2.54][2.54]Dia.PC BoardPC Board[2.54][2.54]94V-O rated 2 Holes Related Product Data: A .175 A Performance Specifications— .350 .350 D[4.45][8.89]page 154[8.89] Contacts—pages 155, 156 Accessories—page 162* PCB Edge Pattern—page 163 .400 E .550 B[10.16] [13.97]B Technical Documents: .750 .750 (pages 186, 187):[19.05] [19.05] .345 Product Specification [8.76] 108-9031 C .250 C Application Specification [6.35] 114-9004 Instruction Sheet 408-7527 Part Numbers No. of Dimensions Dual Without With A B C D E Positions Mounting Ears Mounting Ears ——2-583717-1— .700 .900 .720 61.175 1.430 17.7822.8618.29—1-583861-5 29.8536.32 .800 1.000 .820 7——2-583717-3— 20.3225.420.83 .900 1.100 .920 8——3-583717-9— 22.8627.9423.36 1.700 2.100 583717-1583718-1 43.1853.341-1-1.100 1.300 1.120 10 27.9433.0228.491.575 1.830 —583861-7 40.0146.481- 1.200 1.400 1.600 13——3-583717-3— 30.4835.5640.64 1.500 1.700 1.520 14——2-583717-7— 38.143.1638.61 2.200 2.600 583717-3583718-3 55.8866.041-1-1.600 1.800 1.620 15 40.6445.7241.152.075 2.330 —583861-9 52.7159.181- 1.800 2.000 1.820 2.400 2.800 171-583717-51-583861-1 45.7250.846.3060.9671.12 1.900 2.100 1.920 18——1-583717-7— 48.2653.3448.76 2.100 2.300 2.120 20——3-583717-1— 53.3458.4253.84 2.300 2.500 2.320 2.900 3.300 22583717-9583718-9 58.4263.5058.9373.6683.821-1- 2.600 2.800 2.620 3.200 3.600251-583717-11-583718-1 66.0471.1266.5581.2891.44 3.700 4.100 1-583717-31-583718-3 93.98104.143.100 3.300 3.120 30 78.7483.8279.253.575 3.830 —583861-1 90.8197.281- 3.300 3.500 3.320 3.900 4.300 32—2-583718-7 83.8288.9084.3399.06190.22 3.700 3.900 3.720 4.175 4.430 36—2-583861-5 93.9893.0694.49106.04112.52 4.700 5.100 —1-583718-5 119.38129.544.100 4.300 4 .120 40 104.14109.22104.654.575 4.830 —583861-3 116.21122.681- 5.700 6.100 1-583717-91-583718-7 144.78154.945.100 5.300 5.120 50 129.54134.62130.055.575 5.830 —2-583861-1 141.61148.08 Note: Other connector sizes can be made available, consult Tyco Electronics. 157 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors, .100 [2.54] Centerline (Continued) Fit for With Mounting Ears Housings Preloaded with .055-.070 Without Mounting Ears [1.40-1.78]A A Right-Angle Posts .350PC Board [8.89].128 .300Dia. [3.25][7.62] Typ.Material and Finish: .350 Housing—Black glass-filled polyester,[8.89] 94V-O rated Contacts—Phosphor bronze, plated .100 .100Intercontact .000015 [0.00038] gold in mating area, .100[2.54]Typ.[2.54]Keying Slot Typ. [2.54].100 with entire contact underplated .000030 Typ. [2.54] [0.00076] nickel Posts—Phosphor bronze, tin plated .750 B[19.05] B .550 .400 .345 Related Product Data:[13.97][10.16][8.76] Performance Specifications— .250 page 154[6.35] Asccessories—page 162* .750 [19.05] PCB Edge Pattern and Hole Layout—page 163 .170 .125 [4.32] [3.17] G Technical Documents: .025 C[.064](pages 186, 187): Square Post C Product SpecificationTin-Plated .150 F 108-9031 [3.81]EMin. Application Specification D 114-9004 Instruction Sheet 408-7527 D .128 EDia. [3.25] (2 Plcs.) C B Connector Centerline Spacing.038Dia. Typ. [0.97] A Type II Recommended PC Board Hole Layout Type I Posted Assembly Part Numbers No. of D i m e n s i o n s Right-Angle Post Right-Angle Post D u a l With Mounting Ears W i t h o u t A B C D E F G P o s . Mounting Ears Type I Type II 1.100 1.300 1.120 1.575 1.830 10———1-583900-5— 27.9433.0228.4940.0146.48 1.800 2.000 1.820 .090 .150 17————1-530218-5 45.7250.8046.232.293.81 2.300 2.500 2.320 2.900 3.300 .090 .150 22—1-583900-31-530218-9 58.4263.5058.9373.6683.822.293.81 2.600 2.800 2.620 3.200 3.600 .090 .150 25583900-1—1-530218-1 66.0471.1266.5581.2891.442.293.81 2.900 3.100 2.920 3.375 3.630 .090 .150 28—2-583900-6— 73.6678.7474.1685.7292.202.293.81 3.100 3.200 3.120 3.700 4.100 .090 .150 30—1-583900-41-530218-6 78.7481.2879.2593.98104.142.293.81 5.100 5.300 5.120 5.575 5.830 50——583900-3—— 129.54134.62130.05141.61148.08 Note:Other connector sizes can be made available, consult Tyco Electronics. 158 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors, .125 [3.18] Centerline With Mounting Ears Housings Without Mounting Ears .125Material: Black glass-filled polyesterFit forFit for[3.18].12894V-O rated.055-.070Dia..055-.070.125[3.25] [1.40-1.78][1.40-1.78].125[3.18].1252 HolesPC BoardPC Board[3.18][3.18] Related Product Data: .300.437.437Performance Specifications— [7.62][11.10][11.10] page 154 Contacts—pages 155, 156 .218Accessories—page 162AA.300 [5.54] [7.62]PCB Edge Pattern—page 163 D Technical Documents: (pages 186, 187): Product Specification 108-9031 EApplication Specification 114-9004 B.455.550B Instruction Sheet 408-7527[11.56][13.97] .345.345 [8.76][8.76] .750 [19.05] .750 [19.05] C.250C [6.35] Part NumbersNo. ofDimensions DualWithoutWith ABCDE PositionsMounting EarsMounting Ears .8751.035.8451.2951.555 6583873-11-583864-1 22.2326.2921.4632.8939.501- 1.3751.5351.3451.7952.055 10—1-583864-3 34.9338.9934.1645.5952.20 2.0002.1601.9702.4202.680 15583873-5— 50.8054.8650.0461.4768.071- 2.8753.0352.8453.2953.555 22583873-91-583864-9 73.0377.0972.2683.6990.301- 3.2503.4103.2203.6703.930 25—— 82.5586.6181.7993.2299.82 3.6253.7853.5954.0454.305 28—1-583864-3 92.0896.1491.31102.74109.35 3.8754.0353.8454.2954.555 30—2-583864-1 98.43102.4947.66109.09115.70 5.1255.2855.0955.5455.805 40—1-583864-7 130.17134.23129.41140.84147.44 5.6255.7855.5956.0456.305 441-583873-9— 142.88146.94142.11153.54160.15 Note: Other connector sizes can be made available, consult Tyco Electronics. 159 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors, .125 [3.18] Centerline (Continued) Housings Preloaded with With Mounting Ears Right-Angle PostsFit for .055-.070 [1.40-1.78] PC BoardMaterial and Finish:3.875 .128.125[98.43] Dia.Housing—Black glass-filled[3.25] [3.18] polyester, 94V-O ratedTyp. Contacts—Phosphor bronze, plated ±.007.437 .000030 [0.00076] gold in mating area,±0.18[11.10] with entire contact underplated .000030 [0.00076] nickel .300 [7.62]Posts—Phosphor bronze, tin-plated Related Product Data: .550 [13.97] Performance Specifications— .128Dia. page 154[3.25] .345 Accessories—page 162.750[8.76] .100[19.05]PCB Edge Pattern and Hole [2.54] .170 Layout—page 163 .125[4.32] [3.18] .025 .250 [0.64] [6.35] Square Post 4.035.150Tin-Plated [102.49]Technical Documents:[3.81] .180Min.(pages 186, 187): [4.57] Product Specification 108-9031 Application Specification 114-90044.555 [115.70] Instruction Sheet 408-75274.295 [109.09] .125Typ. [3.18]3.845 [97.66] 30 Dual Positions, Part No. 530238-8 160 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors, .156 [3.96] Centerline Housings With Mounting Ears Material: Black glass-filled poly- ester, 94V-O rated Fit for .128.055 - .070Dia. [3.25].160.156[1.40-1.78] Related Product Data: 2 Holes[4.06][3.96]PC Board Performance Specifications— page 154 .325.437 [8.26][11.10]Contacts—pages 155, 156 Accessories—page 162 PCB Edge Pattern—page 163.162A [4.11] D Technical Documents: (pages 186, 187): Product Specification .345108-9031 E [8.76] Application SpecificationB 114-9004 Instruction Sheet 408-7527 .455 [11.56] .750 [19.05] .250 [6.35] C Part NumbersNo. of Dimensions DualMounting ABCDEPositionsEars 1.1001.264.9761.5351.785 61-583859-3 27.9432.1124.7938.9945.34 1.4121.5761.2881.8472.097 82-583859-1 35.8640.0332.7246.9153.26 1.7241.8881.6002.1592.409 101-583859-9 43.7947.9640.6454.8461.19 2.0362.2001.9122.4712.721 121-583859-5 51.7155.8848.5662.7669.11 2.5042.6682.3802.9393.189 151-583859-7 63.6067.7760.4574.6581.00 2.9723.1362.8483.4073.657 181-583859-5 75.4979.5572.3486.5492.89 3.5963.7603.4724.0314.281 221-583859-3 91.3495.5088.19102.39108.74 4.5324.6964.4084.9675.217 281-583859-1 115.11119.28111.96126.16132.51 5.7805.9445.6566.2156.465 362-583859-3 146.81150.96143.66157.86164.21 Note: Other connector sizes can be made available, consult Tyco Electronics. 161 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Accessories for Crimp Snap Twin Leaf Connectors Related Product Data: Dummy Contacts The dummy contact is used in sparsely Material: Phosphor bronze loaded housings to balance contact pressure. For specific recommendations, consult Tyco Electronincs. Tin Plated — Part No. 583857-5 .000030 [0.00076] Nickel Plated — Part No. 583857-6 Technical Documents Gold Flash-Over-Nickel Plate— Part No. 583857-7 (pages 186, 187): Instruction Sheet 408-7527 Related Product Data: Retaining Spring Retaining springs are used for single Material: Stainless steel sided PC board applications. Use one spring per 6 empty cavities. Technical Documents Unplated— Part No. 583691-2 (pages 186, 187): Gold Flash-Over-Nickel Plate— Part No. 583691-3 Instruction Sheet 408-7527 Technical Documents Keying Plugs (pages 186, 187): Instruction Sheet 408-7527 On-Contact PlugIntercontact Plug Natural Nylon— Part No. 583764-1Natural Nylon— Part No. 583274-1 Glass-Filled Polyester— Part No. 583274-3 Locking Key Material: Nylon On-Contact Clip Part No. 530213-1 .062Kit Part No. 531250-4 Mounting BlockDia. [1.57] Each kit includes 2 mounting blocks Roll Pin Material: Natural color nylon 2 self tapping screws,Card Extender #5 x .437 [11.10] #5 Self Housing Ref.2 roll pinsTapping .075 x .250 [1.57 x 6.35]Screws Mounting Block .062 [1.57] PC Board Ref. 162 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 C o n n e c t o r Card Edge Connectors (Board-to-Board, Wire-to-Board) Crimp Snap Twin Leaf Connectors (Continued) Recommended PC Board Hole for Edge Pattern Locking Key .420 [10.67] .078 .062 [1.98] 45°Chamfer[1.57] B.015 Min.[0.38] A45°Chamfer ConnectorDimensions Centerline ABSpacing .100.093.052 2.542.361.32 .125.118.078 3.183.001.98 .156.153.094 3.963.892.39 Recommended PC Board D Hole Layout E .128Dia. [3.25] (2 Plcs.) C B Connector Centerline Spacing.038Dia. Typ. [0.97] A Connector Centerline Spacing: .100 [2.54] No. ofDimensions Dual ABCDEPositions .900.625.4751.575.400 10 22.8615.8812.0740.0110.16 1.600 17———— 40.64 1.900.625.3752.575.337 20 48.2615.889.5365.418.56 2.100.6254.752.900.337 22 53.3415.8812.0773.668.56 2.400.625.4753.200.400 25 60.9615.8812.0781.2810.16 2.9003.700.400 30—— 73.6693.9810.16 4.900.525.3755.575.337 50 124.4613.349.53141.618.56 Connector Centerline Spacing: .125 [3.18] No. ofDimensions Dual ABCDEPositions 3.6254.295.350 30—— 92.08109.098.89 163 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors Product Facts nContacts on .156 [3.96] centers nGlass-filled polyester, phenolic or diallyl phthalate housings nClosed card entry design helps prevent overstressing of contacts nGold-over-nickel plated contacts nLocking lance permits easy contact replacement nKeying nContacts maintain exact pressures on the circuit paths, despite repeated insertions and extractions nRecognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 nCertified by Canadian Standards Association**, File No. LR 7189 **CSA certification pending for certain products, as noted.AMP-LEAF Connectors are Right-angle posted connec- available with crimp, snap-in tors are supplied in various contacts or preloaded with sizes, with preloaded con- Performance Specifications right-angle posted contacts. tacts on one or both sides. Contact Current Rating*: The solder-type posts are The crimp type printed cir- 5.0 amperes, max. formed 90° from the housing cuit connector is supplied Contact Engaging Force: to permit right-angle inter- with the housing unloaded— 16 oz. [4.4 N], max. facing between mother and the user buys only enough daughter boards. Contact Separation Force: contacts to satisfy circuit 2 oz. [0.6 N], min. requirements. This feature, Vibration: when coupled with the Tyco MIL-STD-202, Method 201 Electronics matched tooling, contributes substantially to Operating Temperature: Contacts –40°C to +85°C lower installed costs. Storage Temperature: –40°C to +85°C Housings: Glass-Filled Polyester, –55°C to +105°C Glass-Filled Phenolic, –65°C to +125°C Diallyl Phthalate, –65°C to +125°C *Consult Tyco Electronics engi- neering when paralleling con- tacts for power applications. 164 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors (Continued) Crimp, Snap-In Contacts Material and Finish: Phosphor bronze, plated as follows: Plating A—.000100-.000200 Wire Barrel Crimp[0.00254-0.00508] tin (lubricant must Insulation Supportbe used) Plating B—.000030 [0.00076] min. gold in mating area, gold flash on remainder of contact, with entire contact underplated .000050 [0.00127] min. nickel Plating C—.000015 [0.00038] min. Terminal Stopgold in mating area, gold flash on Locking Lance remainder of contact, with entire contact underplated .000050 [0.00127] min. nickel Insulation RangeApplicator forPart NumbersPlating D—.000030 [0.00076] min. gold over .000050 [0.00127] min. nickel2 in mating area, remainder of contact 583990-3583204-2Bgold flash over .000015 [0.00038] min.26-22.050-.064 —466366-290028-3 0.12-0.41.27-1.63—343371-1Dnickel Plating E—.000030 [0.00076] min.—583361-2A gold in mating area, with entire contact583989-3583361-3B .12090017-3 (1 #22-20) 22-18.055-.080 underplated .000050 [0.00127] min.3.05583989-4583361-4C466367-290028-3 (2 #22) 0.3-0.91.40-2.03 90101-3 (1 #20)Max.nickel—583555-4E Plating F—.000015 [0.00038] min.—583555-6F gold in mating area, with entire contact16.108.080-.16090031-8 (2 #18) underplated .000050 [0.00127] min.1.25-1.402.742.03-4.06583991-360151-6B466368-290101-3 (2 #20) Max.90101-3 (1 #16)nickel *Applicators are for AMP-O-LECTRIC Model “K” machines. Consult Tyco Electronics for applicators for other bench machines and lead-making machines. Related Product Data: Notes:1.Shorting contacts are available, consult Tyco Electronics. Notes:2.Contacts and housings to accommodate .093 [2.36] thick PC boards can be made available, consult TycoPerformance Specifications— Electronics. page 164 Connector Housings— pages 167-169 Application Tooling— pages 184, 185 Hand Crimping Tool Contact Extraction ToolExtraction Used with Tool Housings Number Technical Documents: 480110-2, -5 (pages 186, 187):480142-2, -3 582140-5 Product Specifications582147-5 582264-2108-9013, 108-9043 582500-2 Application Specification582963-2 114-9003583167-3 465195-1583280-1 Instruction Sheets 583617-1 408-6591, 408-7045, 408-7622,583680-1 583685-1408-7623, 408-7624, 408-7625, 583722-1 408-7626 583723-1 Crimp Inspection Sheet583724-1 583725-1CI 8050-33 583726-1 465195-2480133-2 Plain Finish—Dummy Contact Part No. 66084-1 Tin Finish— Part No. 66084-2Material: Gold Finish— Phosphor bronzePart No. 66084-3 Technical Documents: (pages 186, 187): Instruction Sheet 408-7037 165 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 F o r mP i e c e W i r eW i r e M a c h i n e *A W G / m m T o o lF i n i s hS t r i pL o o s e D o u b l eS i n g l e A M P - O - L E C T R I CR a n g e H a n dC o n t a c t W i r e C o n t a c t Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors (Continued) .030 Solder Eyelet Contact[0.76] .120Contact Material and Finish:[3.05]Surfaces Phosphor bronze, plated .000015 [0.00038] min. gold in contact area, gold flash on remainder of contact, with.100 Locking Lance[2.54]entire contact underplated .000050.280 [7.11][0.00127] min. nickel Standard Eyelet Type Contact Part No. 66067-5 (For .055-.070 [1.4-1.78] Thick PC Boards) Note:Solder tab will accommodate a maxi- 2mum of two 16 AWG [1.25-1.4 mm] solid wires, or two 18 AWG [0.8-0.9 2mm] stranded wires. Post Type Contacts .185 [4.70] Material and Finish: Phosphor bronze, plated .000015 Contact [0.00038] min. gold in contact area, tinSurfaces on post, with entire contact underplated .000050 [0.00127] min. nickel LockingL Lance Loose Piece PostContact Part No. Length(.045 x .045 L[1.14 x 1.14] Post) .960 1-582355-3 24.38 .560 1-582355-5 14.22 Note:Post type contacts are for .055-.070 [1.4-1.78] thick PC boards. Solder Dip Contacts For .052[1.32] Material and Finish:Dia. Hole Phosphor bronze, plated .000015 Contact [0.00038] min. gold in contact area or,Surfaces plated .000030 [0.00076] min. gold in contact area, tin on post, with entire.120 [3.05]contact underplated .000050 [0.00127]Locking Lancemin. nickel Solder Dip Contact Part No. 583294-2 (.000015) Part No. 583294-1 (.000030) (For .062 [1.57] Thick PCBoard) 166 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors, .156 [3.96] Centerline Glass-Filled Polyester A Housings B Material: Glass-filled polyester .156 [3.96]FRelated Product Data: Card Guide Assembly—page 171 PC Board Thickness—.055-.070 [1.40-1.78] Performance Specifications— .325Card Slot page 164[8.26] Depth Contacts—pages 165, 166 C Accessories—page 171 PC Board Layout—page 172 G.700H [17.78] Technical Documents: (pages 186, 187): D Product Specifications 108-9013, 108-9043 Application Specification 114-9003 Instruction Sheet 408-7037 KJ EDia. (2 Holes) No. ofHousingDimensions DualPart ABCDEFGHJKPositionsNumbers 1.7851.5351.264.976.1251.100.456.250.300.350 6583722-1 45.3438.9932.1124.793.1827.9411.586.357.628.89 2.4092.1591.8881.600.1251.724.456.250.300.350 10583723-1 61.1954.8447.9640.643.1843.7911.586.357.628.89 2.7212.4712.2001.912.1252.036.456.250.300.350 12*583724-1* 69.1162.7655.8848.563.1851.7111.586.357.628.89 3.1892.9392.6682.380.1282.504.456.250.300.350 15583680-1 81.0074.6567.7760.453.2563.6011.586.357.628.89 3.6573.4073.1362.848.1252.972.456.250.300.350 18583725-1 92.8986.5479.6572.343.1875.4911.586.357.628.89 3.6573.4073.1362.848.1562.972.456.250.300.350 18583725-3 92.8986.5479.6572.343.9675.4911.586.357.628.89 4.2814.0313.7603.472.1253.596.456.250.300.350 22583617-1 108.74102.3995.5088.193.1891.3411.586.357.628.89 4.2814.0313.7603.472.1563.596.456.250.300.350 22583617-3 108.74102.3995.5088.193.9691.3411.586.357.628.89 4.7494.4994.2283.940.1254.064.456.250.300.350 25583726-1 120.62114.27107.39100.013.18103.2311.586.357.628.89 5.5295.2795.0084.720.1254.844.456.250.300.350 30583685-1 140.44134.09127.20119.893.18123.0411.586.357.628.89 7.0156.5785.9425.722.1565.782.455.290.325.437 36583552-1 178.18167.08150.92145.333.96146.8611.557.368.2511.10 *CSA certification pending. Note:Other connector sizes can be made available, consult Tyco Electronics. 167 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors, .156 [3.96] Centerline (Continued) Glass-Filled Phenolic Housings A Material: Glass-filled phenolic B per MIL-M-14F F Related Product Data:.156JDia. D[3.96](2 Holes) Card Guide Assembly—page 171 Performance Specifications— page 164 Contacts—pages 165, 166 Accessories—page 171 PC Board Layout—page 172 Technical Documents: (pages 186, 187): Product Specifications 108-9013, 108-9043C Application Specification 114-9003 .700H G [17.78]Instruction Sheet 408-7037 E No. ofHousingDimensionsBoard DualPart ThicknessABCDEFGHJPositionsNumbers 1.9821.7671.5501.4101.288.340.250.458.125.055-.070 8582140-5 50.3444.8839.3735.8132.728.646.3511.633.181.40-1.78 2.4072.1571.8661.7221.598.360.250.456.128.055-.070 10582963-2* 61.1454.7947.9043.7440.599.146.3511.583.251.40-1.78 1.8861.7221.598.360.055-.070 110—————583280-1 47.9043.7440.599.141.40-1.78 3.1822.8542.6212.5062.376.350.250.466.187.055-.070 15480110-5 80.8272.4966.5763.6560.358.896.3511.844.751.40-1.78 3.1822.8542.6212.5062.376.350.250.466.125.055-.070 151-582147-5* 80.8272.4966.5763.6560.358.896.3511.843.181.40-1.78 3.1822.9332.6212.5062.376.350.250.466.128.055-.070 151-582500-5 80.8274.4966.5763.6560.358.896.3511.843.251.40-1.78 3.6503.4003.0882.9482.843.375.155.406.156.055-.070 18480133-5 92.7186.3678.4374.8772.219.523.9310.313.961.40-1.78 4.2744.0253.7543.5913.466.350.250.456.125.055-.070 22480142-3 108.56102.2495.3591.2188.048.896.3511.583.181.40-1.78 4.7414.4934.2214.0583.933.350.250.456.125.055-.070 25583167-3* 120.42114.12107.21103.0799.908.896.3511.583.181.40-1.78 6.3655.9285.2925.1325.072.485.290.455.187.084-.1042,332582264-2 161.67150.57134.42130.35128.8312.327.3711.564.752.13-2.64 *CSA certification pending. 1Housing without mounting ears. 2Housing does not accommodate intercontact keying plug. 3For .086 to .104 [2.18 to 2.64] thick PC boards (special contacts required). Note:Other connector sizes can be made available, consult Tyco Electronics. 168 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors, .156 [3.96] Centerline (Continued) Diallyl Phthalate Housings A Material: Diallyl phthalate BF per MIL-M-14F Related Product Data:JDia. D(2 Holes) .156Card Guide Assembly—page 171 [3.96] Performance Specifications— page 164 Contacts—pages 165, 166 Accessories—page 171 PC Board Layout—page 172 Technical Documents: (pages 186, 187): Product Specifications 108-9013, 108-9043C Application Specification 114-9003 .700HG [17.78]Instruction Sheet 408-7037 E Single Slot Housing No. ofHousingDimensionsBoard DualPart ThicknessABCDEFGHJPositionsNumbers 3.1872.8592.6252.5102.380.350.250.466.187.055-.070 15480110-2 80.9572.6266.6863.7560.458.896.3511.844.151.40-1.78 3.1872.9382.6252.5102.380.350.250.466.128.055-.070 15582500-2 80.9574.6366.6863.7560.458.896.3511.843.251.40-1.78 3.6563.4063.0932.9532.848.375.155.406.156.055-.070 18480133-2 92.8686.5178.5675.0172.349.533.9410.313.961.40-1.78 4.2814.0313.7603.5963.472.350.250.456.125.055-.070 22480142-2 108.74102.3995.9091.3488.198.896.3511.583.181.40-1.78 Note:Other connector sizes can be made available, consult Tyco Electronics. 169 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connectors, .156 [3.96] Centerline (Continued) Housings Preloaded with Right-Angle Post Contacts A Material and Finish:F Housing—See chart below Contacts—Phosphor bronze, plated .156.000015 [0.00038] min. gold in mating [3.96]D area, with entire contact underplated .000050 [0.00127] min. nickel Post—Phosphor bronze, tin plated Retaining Spring—Stainless steel.125B [3.18] C Related Product Data: J HG Card Guide Assembly—page 171 Performance Specifications—.125 page 164[3.18] Dia. Accessories—page 171E (2 Holes) PC Board Layout—page 172 Technical Documents: (pages 186, 187): Product SpecificationPost Contact .022 x .036[0.56 x 0.91]Phosphor Bronze108-9013 Phosphor BronzeSelective Gold Plate Tin Platedin Contact Area .000015 [0.00038] Gold .090 [2.29] Min. .325 [8.26].150 [3.81] .156 [3.96] No. ofDimensionsPartHousing Dual NumbersMaterialABCDEFGHJPositions 2.4072.1571.8861.7221.598.360.700.250.456 10583599-1* 61.1454.7947.943.7440.599.1417.786.3511.58 3.1822.9332.6212.5062.376.350.700.250.466Glass-Filled 15583545-1* 80.8274.566.5763.6560.358.8917.786.3511.84Phenolic 3.6503.4003.0882.9482.843.375.700.250.406 583544-1* 92.7186.3678.4474.8872.219.5317.786.3510.31 18 3.6573.4573.1362.9722.848.350.700.250.456Glass-Filled 530851-1* 92.8986.5479.6575.4972.348.8917.786.3511.58Polyester 4.2744.0253.7543.5913.466.350.700.250.456Glass-Filled 583458-2* 108.56102.2495.3591.2188.048.8917.786.3511.58Phenolic 22 4.2814.0313.7603.5963.472.350.700.250.456Glass-Filled 583975-1* 108.74102.3995.5091.3488.198.8917.786.3511.58Polyester 5.2704.9614.6804.5274.402.350.700.250.456Glass-Filled 28530061-1* 133.86126.01118.87114.99111.818.8917.786.3511.58Phenolic *CSA certification pending. Notes:1.Other connector sizes can be made available, consult Tyco Electronics. 2.Finished hole size is .048-.054 [1.22-1.37] diameter. 170 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connector Accessories On-Contact Keying Plug Intercontact Keying Plugs Keying Plugs Material: Nylon Technical Documents: .040 [1.02] Wide—Part No. 582501-1 (pages 186, 187): .025 [0.64] Wide—Part No. 583274-1 Instruction Sheets 408-7036, 408-7037, 408-7068, 408-7339 .055-.070[1.4-1.78] Board Thickness—Part No. 480143-1 Commoning Springs .055-.070 [1.4-1.78] thk. PC Material and Finish: board—Part No. 66092-1 Beryllium copper, gold plated .055-.070 [1.4-1.78] and .084-.104 [2.13-2.64] thk. PC Technical Documents: board with locking latches— (pages 186, 187):Part No. 583454-1 Instruction Sheet 408-7419 Retaining Springs Material: Stainless steel Technical Documents: (pages 186, 187):Nickel Finish—Part No. 42973-1 Plain Finish—Part No. 42973-2 Instruction Sheets 408-7035, Gold Finish—Part No. 42973-3 408-7037 Card Guides.187 [4.75] Material: Glass-filled nylon, black .093 Dia.Technical Documents: [2.36] .135.245(pages 186, 187): [3.43][6.22] Instruction Sheets 408-7557,.545 Ref. 408-7565[13.84] .250.076 [6.35][1.93] 4.000 [101.6] .200 [5.08] .240 [6.1] .375Connector (Ref.) [9.52] Card Guide Part Number 583760-1 Note:Card guides may be used with all connector housings having mounting ears. 171 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 [ 7 . 8 2 ] . 3 0 8 Card Edge Connectors (Board-to-Board, Wire-to-Board) AMP-LEAF Connector PC Board Layouts Recommended PC Board Layouts Technical Documents: (pages 186, 187):.330 [8.38] Instruction Sheet 408-7037 Min. B .050 Min..156 [1.27] .031[3.96] Max. [0.79] A Base Line Note:Slot for intercontact keying may be located between any two pads (except the first two and last two pads). No. ofHousingDimensions PositionsMaterialAB 1.396.152 8P 35.463.86 1.709.151 10P 43.403.84 2.491.153 DP 63.273.89 15 2.487.152 P 63.173.86 2.940.144 18DP 74.683.66 3.583.153 DP 91.003.89 22 3.578.151 P 90.883.84 4.043.150 25P 102.693.81 5.117.140 32P 129.973.56 DP = Diallyl Phthalate P = Phenolic Note:Board thickness .055-.070[1.4-1.78] all posi- tions except 32 position–.084-.104[2.13-2.64]. 172 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) High Current Connectors Product Facts nHigh current capability up to 30 amperes* nUL rated 94V-0 glass-filled thermoplastic housings nChoice of wire-to-board and board-to-board (solder tail) connector configurations in 3, 4, 8, 9, 10 and 12 contact sizes nHeavy duty contacts made of high conductivity copper alloy with tin-over-nickel plating nContacts on .312 [7.92] centers nLarge redundant areas of contact provide excellent electrical continuity nConnectors available for mating with .062 [1.57], .093 [2.36] and .125 [3.18] thick double-sided PC boards nContacts furnished in strip form for automatic machine termination and loose form for hand tool application nRecognized under the Component Program of AMP High Current Edge Wire-to-board housings are Performance Specifications Underwriters Connectors are an economi- available with and without Contact Current Rating*: Laboratories Inc. cal answer to the costly mounting ears and with 30 amperes, max. File No. E28476 issue of interconnecting capabilities of mating with Dielectric Withstanding Voltage high current printed circuit- .062 [1.57], .093 [2.36] andnCertified by Canadian (Sea Level): ry. Designed for a current .125 [3.18] thick double- Standards 1800 VAC capability of up to 30 sided daughter boards. Association Operating Voltage: amperes*, these connectors These housings are File No. LR 7189 250 VAC, max. feature UL rated 94V-0, designed to accept crimp, Insulation Resistance: rugged glass-filled thermo- snap-in contacts which can 1000 megohms, min. plastic housings and high accommodate a wire size conductivity copper alloy range of 16-10 AWG [1.25-6 Contact Resistance @ 30 amperes: 2 2 milliohms, max. contacts with bright tin-over-m m ]. Contacts are fur- nickel plating. Contacts are nished in strip form for auto- Operating Temperature: on .312 [7.92] centers. matic machine termination –40°C to +95°C and in loose form for hand Connectors are available in Contact Engagement Force: tool application. 40 oz. [11.12 N], max. 3, 4, 8, 9, 10 and 12 contact positions and in a choice of While the basic contact is two styles for board-to- designed to carry 30 board and wire-to-board amperes* of current, the *When used with a .180 [4.57] a p p l i c a t i o n s . actual number of contacts in wide double-sided PC board with a connector carrying 30 The board-to-board connec- 5 oz. [0.14 Kg] min. copper each amperes is limited by the tors are supplied preloaded side. Consult Tyco Electronics “T” rise of the connector and with solder tail contacts and engineering when paralleling the PC board. contacts for power applications. are designed to mate with .062 [1.57] thick double- sided daughter boards. 173 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) High Current Connectors (Continued) Crimp, Snap-In Contacts Material and Finish: A—Copper alloy CDA-195 plated .000150 [0.00381] bright tin over.195 [±.020 B[4.95].000030 [0.00076] nickel[±0.51] B—Copper alloy CDA-195 platedC .000150 [0.00381] silver all over .325A Related Product Data:[8.26] .150 Performance Specifications—.390 [3.81] [9.91]page 173 Connector Housings—page 175 Application Tooling—pages 184, 185 Technical Documents: (pages 186, 187): Product Specification 108-9045 ABCApplication Specification2 114-9005 A Instruction Sheets 408-7782, 408-7783, 408-7802A B— A— *Applicators are for AMP-O-LECTRIC Model “K” machines. Consult Tyco Electronics for applicators for other bench machines and lead-making machines. Hand Crimping ToolExtraction Tool 69710-191116-1 174 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 2 . 3 68 . 8 13 1 . 2 44 . 8 34 . 0 6 - 5 . 3 3 9 0 3 3 2 - 14 6 6 4 3 8 - 25 3 1 3 7 3 - 23 - 61 2 - 1 0 . 0 9 3. 3 4 71 . 2 3 0. 1 9 0. 1 6 0 - . 2 1 0 1 . 5 77 . 2 43 1 . 2 44 . 8 34 . 0 6 - 5 . 3 3 9 0 3 3 2 - 14 6 6 4 3 8 - 25 3 0 5 1 9 - 33 - 61 2 - 1 0 . 0 6 2. 2 8 51 . 2 3 0. 1 9 0. 1 6 0 - . 2 1 0 1 . 5 77 . 2 43 1 . 2 44 . 8 34 . 0 6 - 5 . 3 3 9 0 3 3 2 - 14 6 6 4 3 8 - 25 3 0 5 1 9 - 25 3 0 5 2 0 - 13 - 61 2 - 1 0 . 0 6 2. 2 8 51 . 2 3 0. 1 9 0. 1 6 0 - . 2 1 0 1 . 5 77 . 2 42 9 . 4 66 . 6 02 . 2 9 - 3 . 6 8 9 0 3 3 3 - 14 6 6 4 3 9 - 25 3 0 5 1 7 - 25 3 0 5 1 8 - 11 . 2 5 - 21 6 - 1 4 . 0 6 2. 2 8 51 . 1 6 0. 2 6 0. 0 9 0 - . 1 4 5 m mA W G Die InsertM a c h i n eT h i c k n e s s Strip FormLoose Piece R a n g e 6 9 7 1 0 - 1A M P - O - L E C T R I CDaughter Board R a n g e P l a t i n g Ins. Dia. Contact Part NumbersD i m e n s i o n s Hand ToolApplicator forM a t e a b l e Wire Size Card Edge Connectors (Board-to-Board, Wire-to-Board) High Current Connectors, .312 [7.92] Centerline With Mounting Ears Housings Material: White glass-filled polyester, 94V-0 rated A .312B [7.92] Related Product Data: [±.010*Performance Specifications—G[±0.25] .156page 173Dia. [3.96] [±.007Contacts—page 174*E[±0.18] [±.015*F[±0.38] Technical Documents: (pages 186, 187): Product Specification 108-9045 Instruction Sheet 408-9123 X, Y PC Board Thickness C ±.010.750 ±0.25[19.05] .400 [10.16] Board Slot Depth ±.0101.400 .300±0.25[35.56] [7.62] Void Coring [±.010*DOptional[±0.25] Housing Part Numbers No.DimensionsX = .062 [1.57]Y = .093 [2.36] of ABCDEFGWithWithPos. Mtg. EarsMtg. Ears 1.024.6241.1641.1141.5381.972.500 3—531370-2 26.0115.8529.5728.339.0750.0912.70 1.336.9361.4761.4261.8502.284.437 4530521-3— 33.9323.7737.4936.2246.9958.0111.10 2.5842.1842.7242.6743.0983.532.437 8530521-6— 65.6355.4769.1967.9278.6989.7111.10 2.8962.4963.0362.9863.4103.844.437 9530521-7— 73.5663.4077.1175.8486.6197.6411.10 3.8323.4323.9723.9224.3464.780.437 12530521-9— 97.3387.1710.8999.62110.39121.4111.10 Notes:1.XHousings designed to accept .055-.070[1.4-1.78] thick daughter boards; use intercontact Keying Plug No. 530533-1. Notes:2.YHousings designed to accept .084-.102[2.13-2.59] thick daughter boards; use intercontact Keying Plug No. 531369-1. + Contact 531373-2. 4.Other connector sizes can be made available, consult Tyco Electronics. 175 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Use Extraction Tool No. 91116-1 to remove contacts. (Refer to Instruction Sheet 408-7782).3 .N o t e s : Card Edge Connectors (Board-to-Board, Wire-to-Board) High Current Connectors .312 [7.92] Centerline (Continued) [±.007 Housings Preloaded withB[±0.18] .312 Solder Tail Contacts [7.92] ±.010.437* ±0.25[11.1] Material and Finish: EHousing—White glass-filled polyester,.218D.156 Dia.94V-0 rated[5.54] [3.96] Fit forContacts— .062 A—Copper alloy CDA-195 plated [±.010[1.57] C.000150 [0.00381] bright tin[±0.25]PC Board over .000030 [0.00076] nickel B—Copper alloy CDA-195 plated .000150 [0.00381] silver plate.300.937 over .000030 [0.00076] thk. nickel[7.62][23.8].400 [10.16] C—Copper alloy CDA-195 plated Board Slot .000030 [0.00076] gold in contact area,Depth .000150 [0.00381] tin-lead solder post, over .000030 [0.00076] nickel.030 [0.76] F Related Product Data: [±.015Performance Specifications—A[±0.38] page 173 Technical Documents: (pages 186, 187): Void Coring OptionalProduct Specification 108-9045 ±.003±.003.130.130±.002±.002.104.104 Dia.Dia.Dia.Dia.±0.08±0.08[3.3[3.3] ] ±0.05±0.05[2.64[2.64] ] .375.375.539.539 EE [9.52][9.52][13.69][13.69] BB PC Board Thickness: .062[1.57] Recommended PC Board Hole Layout *May go to .020[0.51] over nominal at top center of housing. No. ofDimensionsPlatingConnector PositionsABCDEFPart Numbers 1.9721.5381.1641.024.624.180 3A531353-2 50.0939.0729.5726.0115.854.57 2.2841.8501.4761.336.936.180 4A531353-3 58.0146.9937.4933.9323.774.57 2.5932.1621.7881.6481.248.180 5A531353-4 65.8654.9145.4241.8631.704.57 2.9082.4742.1001.9601.560.180 6A531353-5 73.8662.8453.3549.7839.624.57 A531353-6.180 4.57B145116-33.5323.0982.7242.5842.184 8 89.7178.6969.1966.6355.47.283 B146912-2 7.19 3.8443.4103.0362.8962.496.180 9A531353-7 97.6486.6177.1173.5663.404.57 A531353-8.180 4.57B145116-14.1563.7223.3483.2082.808 10 105.5694.5485.0481.4871.32.283 B146912-3 7.19 A531353-9 .180 B145116-2 4.57 4.7804.3463.9723.8323.432C645200-312 121.41110.39100.8997.3387.17 .283 B146912-1 7.19 Notes:A 176 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Other connector sizes can be made available, consult Tyco Electronics.2 . [1.57] thick dummy PC board should be inserted into the connector during soldering to a mother board.. 0 6 21 . Card Edge Connectors (Board-to-Board, Wire-to-Board) DUO-TYNE Flag Connectors Product Facts nRight angle design permits cabling in close quarters nRecessed contacts help prevent arcing nSizes and configurations available with or without mounting ears nLowest installed costs achieved through high- speed compression crimp- ing with AMP matched tooling nMeets quality and reliability requirements for appliance controls, vending machine subassemblies and business machines nRecognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 nCertified by Canadian Standards Association File No. LR 7189 This flag-type connector is the keyed housing to the Performance Specifications designed to meet the quali- card cutout and double Contact Rating*: ty and reliability of such locking of the contacts 5 amperes equipment as appliance when a PC board is High Potential: controls, vending machine inserted. In addition, con- 2200 VAC, rms subassemblies, television, tacts are recessed to pre- Operating Temperature: stereo, business machines vent arcing. All sizes and –40°C to +105°C and other applications with configurations are available Vibration: similar control needs. with or without mounting 10 to 55 cps per MIL-STD-1344, ears. Added to low initial Among its assembly-saving Method 202 cost, lowest installed costs features is a right-angle are achieved through high- design which permits speed compression crimp- cabling in close quarters, ing with Tyco Electronics where it does not require matched tooling. frame mounting to attach *Consult Tyco Electronics engi- neering when paralleling con- tacts for power applications. 177 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) DUO-TYNE Flag Connectors (Continued) T a p e r e d Beam Crimp, Snap-In Contacts Material and Finish: Beryllium copper or phosphor bronze (see chart) plated as follows: Plating A—.000030 [0.00076] gold in mating area, with entire contact under- plated .000050 [0.00127] nickel Plating B—.000015 [0.00127] gold in mating area, with entire contact under- plated .000050 [0.00127] nickel Plating C—.000150 [0.00381] tin Related Product Data: Performance Specifications— page 177 Connector Housings—page 179 Contact Applicator for Wire Size Range Contact Part Numbers Insulation Finish Material AMP-O-LECTRIC Hand Tool Application Tooling—pages 184, 185 2 Dia. Range AWG mm Loose Piece Strip Form (Plating) Machine* A530005-3530004-6.035-.055Beryllium26-22 466586-290094-4Technical Documents:0.89-1.40CopperB—530004-7 (pages 186, 187):B—530002-7 PhosphorC—530002-5Product Specification Bronze A—530002-3108-9038 .060-.090 22-18-C—530006-5466424-290027-4Application Specification1.52-2.29 A—530006-6114-9002Beryllium CopperB530007-3—Instruction Sheets 408-7047, C—530006-2408-7780, 408-7848, 408-7849 .090-.130Phosphor 18-16-C—530505-5466413-2— 2.29-3.30Bronze *Applicators are for AMP-O-LECTRIC Model “K” machines. Consult Tyco Electronics for applicators for other bench machines and lead-making machines. Contact Extraction Tool Hand Crimping Tool 810992-1 178 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 . 40 . 8 0 . 90 . 3 0 . 40.12- Card Edge Connectors (Board-to-Board, Wire-to-Board) DUO-TYNE Flag Connectors (Continued) Housings, With and Without Mounting Ears A .100 [2.54]Material: Natural nylon Related Product Data: Performance Specifications— page 177 Contacts—page 178 .156 PC Board Layout—page 181.265[3.96] [6.73]Dia. 2 Holes.500 .375.060.090[12.70]Technical Documents:B[9.53][1.52][2.29].095 (pages 186, 187): [2.41] Product Specification 108-9038 .590Application Specification [14.99] 114-9002 Instruction Sheet 408-7047Fit for .055-.070 [1.40-1.78] .295 PCBoard [7.49]On-Contact Keying Plug .156 [3.96] .380 [9.65]Material: Nylon C .190 [4.83] D Part Number 583661-1 Technical Documents: (pages 186, 187): Part Numbers With Mounting EarsWithout Mounting EarsInstruction Sheet 408-7486No. Dimensions ofs.Inro F s.Inro F s.Inro Fs.Inro F ABCDPos.egnaR. aiDegnaR. aiDegnaR. aiDegnaR. aiD 1.384.414.6241.004 3582380-9——— 35.1510.5215.8525.50 .736.936 5————582370-9530853-2 22.4027.74 1.852.8821.0921.472 6582382-9530509-1582371-9530853-3 47.0422.4027.7437.39 2.3201.3501.5601.940 9582383-9530509-2582375-9— 58.9334.2939.6249.28 2.7881.8182.0282.408 12582384-9530509-6582376-9530853-5 70.8246.1851.5161.16 3.1002.1302.3402.720 14582385-9530509-7582372-9530853-6 78.7454.1059.4469.09 3.2562.2862.4962.876 15582386-9530509-3582377-9— 82.7058.0663.4073.05 3.7242.7542.9643.344 18582387-9530509-8582378-9530853-8 94.5969.9575.2984.94 4.3483.3783.5883.968 22582388-9530509-9582379-9— 110.4485.8091.14100.79 Note: 179 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Other connector sizes can be made available, consult Tyco Electronics. [ 2 . 2 9 - 3 . 3 0 ][ 0 . 8 9 - 2 . 2 9 ][ 2 . 2 9 - 3 . 3 0 ][ 0 . 8 9 - 2 . 2 9 ] . 0 9 0 - . 1 3 0. 0 3 5 - . 0 9 0. 0 9 0 - . 1 3 0. 0 3 5 - . 0 9 0 Card Edge Connectors (Board-to-Board, Wire-to-Board) DUO-TYNE Flag Connectors (Continued) Recommended PC Board Layouts Related PC Board Data: ±.003.014/.016A Recommended Board Thickness—[±0.08][0.36/0.41] .055-.070 [1.40-1.78] ±.005.044 Recommended Chamfer of Mating±0.13][1.12 ±.005.062 Edge of Boards—.015 [0.38] x 45° ±0.13][1.57±.005.156 Recommended Pad Plating—Tin±0.13][3.96 .000150-.000400 [0.00381-0.01016] thick ±.008.280 ±0.13] Contact Pads Contact Pads.148[3.76] R. Retaining Dimples (Optional) ±.003±.005.115.070 Min.A [±0.08]±0.13][2.92][1.78 No. ofDimension PositionsA .400 3 10.16 .712 5 18.09 .868 6 22.05 1.337 9 33.96 1.805 12 45.85 2.117 14 53.77 2.272 15 57.71 2.741 18 69.62 3.365 22 85.47 180 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 [ 7 . 1 1 Card Edge Connectors (Board-to-Board, Wire-to-Board) Printed Circuit Board Connector Hood Assemblies Product Facts nCan be used with the highly versatile AMP-LEAF and Crimp Snap Twin Leaf printed circuit edge connectors nClamping capabilities for wire bundles to .550 [13.97] maximum diameter nAvailable with 90° or 180° cable outlet nAll plastic construction— thermoplastic material UL rated 94V-0 for electrical and mechanical applica- tions up to + 105°C nThermoplastic material has excellent resistance to common commercial cleaners when used at moderate temperatures nSeparate hood assembly halves permit easy cable dressing nFurnished in convenient kit form—each kit includes four cable clamp sizes For use with the following connectors: Crimp Snap Twin Leaf Connectors (Pages 154-163) AMP-LEAF Connectors (Pages 164-172) 181 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors (Board-to-Board, Wire-to-Board) Specific Product Name_12 Hel. Con. (Continued)_9pt Helvetica Lt Condensed 90° Cable Outlet Material: Natural color thermoplastic .240.260 .350 [6.10].440Related Product Data:[6.60] [8.89] [11.18]#5 x 3/8[9.52] Crimp Snap Twin LeafThread Forming Screw (3)Connectors—pages 154-163 1.500AMP-LEAF Connectors— [38.10] pages 164-172 1.150 [29.21] Technical Documents: (pages 186, 187): Instruction Sheet 408-7719 .170 .625 [4.32] [15.88] 1.797 [45.64] #5 x 5/8[15.88] Thread Forming.375 Screw (2)[9.52] hitdWro tcennoC0[x.aM ]5743 .hitdW[ro tcennoC]eiz SrotecnnoC AMPHoodAMP Hood L Dim. No. ofContactMtg. HoleLengthConnectorAssemblyConnector (Max.)Pos.CentersCenters(Max.)*rmeub NtiK*rmeub NtiK 1.563.4063.6853.826 18AMP-LEAF530088-3—— 3.9686.5193.6097.18 .1564.0314.2964.451Crimp Snap 22——1-530088-4 3.96102.39109.12113.06Twin Leaf Note: 182 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Other hood sizes can be made available, consult Tyco Electronics. *All screws and four sizes of cable clamps are supplied with each kit. F a m i l yF a m i l y A s s e m b l y H o o d 1 1 . 1 09 . 6. 3 8 Card Edge Connectors (Board-to-Board, Wire-to-Board) Printed Circuit Board Connector Hood Assemblies (Continued) 180° Cable Outlet .440.350 [11.18][8.89] Material: Natural color thermoplastic .625 [15.88] .260 Related Product Data: [6.60] AMP-LEAF Connectors— 1.500 pages 164-172[38.10] .170 [4.32]1.875 [47.62] Technical Documents: .240 (pages 186, 187): [6.10] Instruction Sheet 408-7719 1.150 [29.21] #5 x 3/8[9.52] Thread Forming Screw (2)#5 x 5/8[15.88] Thread Forming.563 Screw (2)[14.30] Connector SizeHoodConnector Width .380 [9.65] Max. No. ofL Dim.ContactMtg. HoleLengthAMPConnectorHood Assembly Pos. CentersCenters(Max.)(Max.)*ermubN iKt .1564.0314.3214.451 22AMP-LEAF530087-4 3.96102.39109.76113.06 Note: 183 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Other hood sizes can be made available, consult Tyco Electronics. *All screws and four sizes of cable clamps are supplied with each kit. F a m i l y Card Edge Connectors Application Tooling for Wire Crimp Contacts Tooling shown on this page is designed to terminate wire crimp contacts used in various wire-to-board connectors. AMP-O-LECTRIC Model “G” Terminating Machine (Shown with Optional Crimp Quality Monitor) automatic precision adjust The AMP-O-LECTRIC Model and machine-mounted sen- “G” is a semi-automatic sors, or with manual preci- bench-top machine for ter- sion adjust with or without minating wire using reeled sensors. All versions will terminals and contacts. It accept existing T y c o features a quiet and reliable E l e c t r o n i c s ministyle appli- direct motor drive, micro- cators with minor modifica- processor controls for ease tions. of setup and operation, and guarding and lighting For further details, request designed for operator con- Tyco Electronics Catalog venience and safety. Three 65828. versions are available: with AMP-O-MATIC Model II Stripper/Crimper Machine (Shown with Optional Crimp Quality Monitor) This machine also strips wire, and is therefore used to terminate jacketed cable. It features manual precision adjust, keyed strip blades for faster, more accurate setups, and an efficient scrap removal system. Applicators are inter- changeable. All adjust- ments can be made from the front of the machine without special tools. Entry Level Terminator (ELT), 1338600-(x) Semiautomatic Bench but the highest crimp force Terminator for side- and applications. Optional end-feed reeled terminals equipment is also available and contacts. The ELT uses to meet your specific appli- a DC motor with gear box cation requirements. drive. The result is a small- For more information, footprint design that is fast request catalog 1308382. and quiet. Cycle time is less than 0.400 sec. with an operation sound level of 76dBa. With a crimp force capacity of 3,000 pounds, the ELT is available for all Optional Stripping Module for the ELT and AMP-O-LECTRIC Model G of damaging wire conduc- The combination of the tors during handling or stor- Stripping Module with the age. Once the wire is fed AMP-O-LECTRIC Model G into the start sensor the Terminator or the Entry Stripping Module does the Level Terminator provides rest, improving placement an economical, proficient accuracy. method of stripping wire and crimping terminals on For more information, the same machine. Wires request catalog 1309085. are stripped moments before crimping, meaning there is virtually no chance 184 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Application Tooling for Wire Crimp Contacts (Continued) AMPOMATOR CLS IV+ Lead-Making Machines, 356500-1, -2 Fully-automatic machines wire runout and splice that measure, cut, strip and detection, and motorized terminate single leads. pre-feed with wire straight- Microprocessor-controlled, ener. Crimp quality monitor- and programmed and oper- ing is also available. ated using an easy-to-fol- For more information, low, menu-driven request catalog 124324. touchscreen. Features include direct-drive termi- nating units with precision crimp height adjustment, fully programmable setups, Crimp Quality Monitor (CQM), 1320420-1, -2 This unique system pro- AMP-O-LECTRIC Model “G” vides 100% on-the-fly crimp Termination Machines, the inspection. It measures the monitor is mounted to the crimp height of each termi- machine. When used with nation, and evaluates the AMPOMATOR CLS IV Lead- quality of each crimp. If a Making Machines, it is inte- crimp is questionable, the grated into the machine’s monitor alerts the operator operating system. with both visual and audible For more information, alarms. It also provides request catalog 82275. ports for printing and net- working. When used with CERTI-CRIMP Straight Action Hand Tools (SAHT) For more information, Premium grade hand tools. request catalog 65780. Feature ratchet control to provide complete crimp cycle. Die sets close in a straight line. Include a con- tact locator and wire stop, plus an insulation crimp adjustment lever, when applicable. Approximate weight 1.3 lb [0.59 kg]. 626 Pneumatic Tool System control available to provide Lightweight, air-operated complete crimp cycle. modular tooling system. Accepts a wide variety of For more information, interchangeable heads for request catalog 124208. crimping various types of contacts, terminals and splices onto wires ranging 2 6-26 AWG [13-0.12 mm ], plus coaxial and fiber optic cable. Available with either hand- or foot-actuation switch. Optional ratchet 185 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Technical Documents 114-26003 Linear ZIF PC Board Edge Connector, The following is a list of technical documents covering .100 [2.54] Centerline the application, performance and maintenance of the AMP Card Edge Connectors presented in this catalog. Instruction Sheets: 408-2665 Linear ZIF, Carrier Removal Tool Series Product Specifications describe technical performance char- 265924 acteristics and verification tests. They are intended for the 408-2995 Linear ZIF, Housing Wing Removal and Design, Component and Quality Engineer. Replacement Tool 266233-1 Application Specifications describe requirements for using 408-2999 Linear ZIF, T-Bar Insertion Tool Series 266267 the product in its intended application and/or crimping 408-6915 Linear ZIF, Housing Assembly Insertion Tool information. They are intended for the Packaging and Series 313136 Design Engineer and the Setup person. 408-6916 Linear ZIF, T-Bar Insertion Tool Series 313139 Instruction Sheets provide instructions for assembling Press-Fit Board-to-Board Connectors or applying the product. They are intended for the Manufacturing Assembler or Operator. AMP PACE Connectors Product Specifications: Solder Type Board-to-Board Connectors 108-14019 AMP PACE Connector, .125 x .250 [3.18 x 6.35] Standard Edge .050 Series PCI Connectors Centerline Product Specification: 108-26003 ACTION PIN Contacts 108-14034 Standard Edge .050 Series PCI Connector Application Specification: Application Specification: 114-26002 AMP PACE Connector 114-26012 Standard Edge .050 Series PCI Connector Instruction Sheets: Standard Edge .050 Series Connectors 408-2933 Contact Replacement Tool .100 x .200 [2.54 x 5.08] and .125 x .250 [3.18 x 6.35], Product Specification: AMP PACE Connector 108-14034 Standard Edge .050 Series Connector 408-2978 Seating Tool Ground Module, Application Specification: AMP PACE Connector 114-26012 Standard Edge .050 Series Connector 408-2979 Seating Tool Power Module, AMP PACE Connector Standard Edge II Connectors 408-6726 Seating Tool, .156 x .200 [3.96 x 5.08] Product Specification: Part No. 59955, AMP PACE Connector 108-9039 Standard Edge II Connector 408-6727 Seating Tool, .125 x .125 [3.18 x 3.18] Low Profile Connectors Part No. 59953, AMP PACE Connector 408-6881 Contact Replacement Tool Product Specification: .100 x .100 [2.54 x 2.54] with and without Scoops 108-9044 Low Profile Edge Connector AMP PACE Connector Instruction Sheet: 408-9058 Seating Tool .100 x .200 [2.54 x 5.08] with Card 408-7772 Contact Replacement, Low Profile Edge Connector Scoops, Part No. 58150, AMP PACE Connector 408-9063 Seating Tool .125 x .250 [3.18 x 6.35] Twin Leaf Mother Board Connectors Part No. 58142, AMP PACE Connector Product Specification: 408-9067 Seating Tool .100 x .200 [2.54 x 5.08] 108-9027 Twin Leaf Mother Board Connector Part No. 58140, AMP PACE Connector Instruction Sheets: 408-9091 Accessories and Tooling, .100 x .200 408-7479 Keying Plugs, Twin Leaf Mother Board Connector [2.54 x 5.08] AMP PACE Connector 408-7498 Connector Layout, Twin Leaf Mother Board 408-9119 Seating Tool, .125 x .250 [3.18 x 6.35] with Card Connector Scoops, Part No. 58184, AMP PACE Connector 408-7506 Card Guides, Twin Leaf Mother Board Connector 408-9186 Contact Replacement Tool; .100 x .200 [2.54 x 5.08], Rotary Cam ZIF Connectors .125 x .125 [3.18 x 3.18], Product Specification: .125 x .250 [3.18 x 6.35] with Scoops, 108-9048 Rotary Cam PC Board Edge Connector .156 x .200 [3.96 x 5.08], AMP PACE Connector Instruction Sheet: 408-9188 Seating Tool .100 x .100 [2.54 x 2.54] 408-7911 Rotary Cam ZIF Connectors Part No. 58200, AMP PACE Connector Linear ZIF Connectors ECONOMATE Connectors Product Specifications: Product Specification: 108-14015 Linear ZIF PC Board Edge Connector, 108-26002 ECONOMATE Connector .100 [2.54] Centerline 108-26003 ACTION PIN Contacts Instruction Sheet: 408-9091 Accessories and Tooling, .100 x .200 [2.54 x 5.08] Application Specification: AMP PACE Connector 186 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Technical Documents (Continued) Wire-to-Board Connectors High Current Connectors Crimp Snap Twin Leaf Connectors Product Specification: 108-9045 High Current Edge Connector Product Specification: 108-9031 Crimp Snap Twin Leaf Connector Application Specification: (Bifurcated Contacts) 114-9005 Contact, High Current Edge Connector Application Specification: Instruction Sheets: 114-9004 Contact, Twin Leaf Connector 408-7782 Extraction Tool 91116-1, High Current Connector Instruction Sheets: 408-7783 Die Inserts 90332-1 and 90332-2 408-7527 Accessories and Contacts, Crimp Snap Twin 408-7802 Die Inserts 90333-1 and 90333-2 Leaf Connector 408-9123 High Current Connectors 408-7529 Extraction Tool 91073-1 408-7531 Hand Tool 90268-1, Single Crimp, 28-24 AWG DUO-TYNE Flag Connectors 2 [0.08-0.2 mm ] Wire Product Specification: 408-7551 Hand Tool 90264-1, Double Crimp, 22-20 AWG 108-9038 DUO-TYNE Flag Connector, 2 2 [0.3-0.6 mm ] and 18 AWG [0.8-0.9 mm ] Wire Tapered Beam Contact 408-7583 Hand Tool 90285-1, Double Crimp, 20-18 AWG Application Specification: 2 2 [0.5-0.9 mm ] and 16 AWG [1.25-1.4 mm ] Wire 114-9002 Contact, DUO-TYNE Flag Connector 408-8547 CERTI-CRIMP II Straight Action Hand Tools Instruction Sheets: AMP-LEAF Connectors 408-7047 DUO-TYNE Flag Right-Angle Connector Product Specifications: 408-7486 On-Contact Keying Plug 583661 108-9013 AMP-LEAF Connector 408-7780 Hand Tool 90335-1, 18-16 AWG 108-9043 AMP-LEAF Connector, Tin Plated Contacts 2 [0.8-1.4 mm ] Wire Application Specification: 408-7848 Hand Tool 90027-4, 22-18 AWG 2 114-9003 Contact, AMP-LEAF Connector [0.3-0.9 mm ] Wire 408-7849 Hand Tool 90094-4, 26-22 AWG Instruction Sheets: 2 [0.12-0.4 mm ] Wire 408-6951 Lubricant for tin plating, fretting, corrosion 408-7035 Retaining Spring 42973 Printed Circuit Board Connector Hood Assemblies 408-7036 On-Contact Keying Plugs 480143 and 582756 Instruction Sheet: 408-7037 Accessories and Contacts, 408-7719 Printed Circuit Board Connector Hood Assemblies AMP-LEAF Connector 408-7045 Extraction Tool 465195 408-7068 Intercontact Keying Plug 582501 408-7339 Intercontact Keying Plug 583274 408-7419 Commoning Springs 2 408-7622 Hand Tool 90017-3, 22-20 AWG [0.3-0.6 mm ], 2 Two 22 AWG [0.3-0.4 mm ] or One 18 AWG 2 [0.8-0.9 mm ] Wire 2 408-7623 Hand Tool 90028-3, 26-22 AWG [0.12-0.4 mm ], 2 Two 22 AWG [0.3-0.4 mm ] Wires 408-7624 Hand Tool 90031-8, Two 18 AWG 2 [0.8-0.9 mm ] Wires 2 408-7626 Hand Tool 90101-3, 20 AWG [0.5-0.6 mm ] or 2 Two 20 AWG [0.5-0.6 mm ] Wires 187 Catalog 1654080 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Part Number Cross Reference—Tyco Part Number to Acquired Part Number Tyco A c q u i r e d Tyco A c q u i r e d All Tyco Electronic Part Numbers without a P a g eP a g e Part Part Part Part N u m b e rN u m b e r corresponding acquired Part Number are listed as N u m b e rN u m b e rN u m b e rN u m b e r base part numbers only. Complete part numbers 119726—103480110—165,168, (with prefixes and/or suffixes) are shown on the 119734—101169page(s) indicated. 119736—101480133—165,168, 119738—103169 119790—110480142—165,168, Tyco A c q u i r e d P a g e119791—103169Part Part N u m b e r N u m b e rN u m b e r119802—100,102,480143—171 11299—9104,106,530002—178 42973—171108,110,530004—178 58084—117111,120530005—178 58140—115119822—107530006—178 58142—115119831—101530007—178 58143—115119840—107530030—72 58150—115119841—107530061—170 58184—115119853—104530087—183 58200—115119880—105530088—182 58210—115119950—93530213—162 58218—115145031—14530218—158 59881—112145089—23530238—160 60151—165145098—9530245—156 66067—166145113—8530265—72 66084—165145116—176530267—72 66092—171145154—9530268—72 69710—174145165—10530270—72 90017—165145166—8530278—72 90027—174145167—9530282—72 90028—165145168—10530286—72 90031—165145169—8530290—72 90094—174145246—10530291—72 90101—165146912—176530292—66 90264—155147400—85530384—22 90268—155147668—129530396—21 90285—155176137—17530505—178 90332—174176139—25530509—179 90333—174265868—126530517—174 91081—72265871—95,115,530518—174 91088—72126530519—174 91116—174,175265879—126530520—174 91535—155265881—126530521—175 98014—57265902—126530533—175 98341—150265904—126530654—62 117169—112,122265905—126530655—62 117249—124,126265906—126530656—62 117269—124,126265910—126530657—62 117272—126265911—126530659—60 117285—121,126265912—126530662—60 117296—121,126265924—95,126530663—60 117311—123265931—126530664—60 117793—126265937—126530666—62 117795—120,126265962—126530667—62 117796—126266129—126530668—62 117798—120,126266220—115530669—62 117879—126266233—95,186530671—60 117880—126266235—95530672—60 118243—123266264—95530673—60 118778—121266267—95530674—60 118951—120313136—95530677—62 118982—100,102, 313139—95530678—62 104,105,313256—95530689—62 106,108,343371—165530825—21 110,111,350396—21530826—22 120,121356500—185530841—20 119136—123465195—165530842—20 119163—103466366—165530843—17 119196—88466367—165530844—18 119200—107466368—165530851—170 119202—107466413—178530853—179 119216—103466424—178531004—80 119216—103466438—174531007—78 119237—101466439—174531019—74 119254—110466577—155531020—74 119256—110466586—178531021—74 119311—88466622—155531023—77 119341—112466713—155531024—77 119413—101466912—155531025—78 119552—105466919—155531026—78 119677—103466928—155531250—22,162 188 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 a v a i l a b l e . Contact Engineering if no corresponding Tyco Number is Card Edge Connectors Part Number Cross Reference—Tyco Part Number to Acquired Part Number Tyco A c q u i r e d Tyco A c q u i r e d Tyco A c q u i r e d P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r 531341—20583723—165,1670-1437261-2C8D50PF29023138 531353—176583724—165,1670-1437261-5C8D50PF29033138 531369—175583725—165,1670-1437261-6C8D50PF29043140 531370—175583726—165,1670-1437262-4C6D06PF29013148 531373—174,175583752—720-1437262-5C6D06PF29043148 531395—75583753—720-1437262-6C6D10PF29022146 531395—75583754—720-1437262-7C6D10PF29043148 531396—75583755—720-1437262-9C6D15PF29022146 531414—76583760—1710-1437263-7C7D06PF29023142 531433—62583764—1620-1437263-8C7D06PF29043144 531476—155583853—1550-1437264-3C1D18PF29015131 531477—155583854—1560-1437264-6C1D20PF29015131 531478—155583857—1620-1437264-7C1D20PF29043131 531534—66583859—1610-1437264-9C1D25PF29013131 531863—79583861—1570-1437267-5A6D06DS29A354 532563—79583864—1590-1437267-6A6D10DS29A254 532600—23583873—1590-1437267-7A6D10DS29C254 536128—25583875—1550-1437267-8A6D10DS29C354 582140—165,168583879—1560-1437267-9A6D10RA29A56 582147—165,168583884—1560-1437268-4A7D06DS29C249 582264—165,168583900—1580-1437268-5A7D06RA29C52 582355—166583975—1700-1437268-6A7D06RA29E52 582370—179583989—1650-1437268-7A7D10DS29C249 582371—179583990—1650-1437268-8A7D10RA29AM23151 582372—179583991—1650-1437268-9A7D10WW29A349 582375—179645115—870-1437270-1A8D31DS29B343 582376—179645116—910-1437270-2A8D31DS29C243 582377—179645135—840-1437270-3A8D31DS29D243 582378—179645142—920-1437270-4A8D31RA29A46 582379—179645145—850-1437270-6A8D31RA29C46 582380—179645146—890-1437270-7A8D31RA29CM23347 582382—179645147—860-1437270-8A8D31RA29E46 582383—179645149—900-1437270-9A8D31RA29F46 582384—179645155—660-1437274-3C7D06DS29C136 582385—179645169—250-1437274-5C7D15DS29C136 582386—179645200—1760-1437274-7C7D15DS29C336 582387—179645235—240-1437274-8C7D18DS29C336 582388—179645293—80,820-1437274-9C7D22DS29C136 582500—165,168,645384—230-1437276-2C8D31DS29A332 169645394—1050-1437276-3C8D31DS29C131 582501—171650025—17,18,0-1437276-5C8D31DS29C231 582963—165,16820,21,0-1437276-6C8D31DS29C332 583167—165,16822,23,0-1437276-8C8D31DS29D131 583204—16524,25,0-1437276-9C8D31DS29D332 583274—162,171631-1437260-4C8D06PF29013140 583280—165,168650059—1091-1437260-5C8D06PF29043140 583294—166650083—791-1437261-1C8D60PF29023138 583361—165650090—121-1437262-0C6D15PF29023146 583407—66,72650091—131-1437262-3C6D18PF29013148 583425—71650092—121-1437262-4C6D18PF29023146 583454—171650118—231-1437262-8C6D22PF29013148 583458—170650122—1031-1437262-9C6D22PF29023146 583485—66,72650123—1031-1437263-4C7D18PF29012144 583486—66,72650124—1031-1437263-5C7D18PF29013144 583533—66,72650148—1171-1437263-6C7D18PF29022142 583544—170650149—1171-1437263-7C7D18PF29023142 583545—170650150—1171-1437263-8C7D18PF29043144 583552—167650181—121-1437263-9C7D20PF29012144 583555—165650187—231-1437264-0C1D25PF29015131 583599—170650207—181-1437264-5C1D35PF29013131 583616—155650263—171-1437264-6C1D35PF29015131 583617—165,167650281—1171-1437265-0W8D18PF29063136 583649—155650297—1031-1437265-2W8D22PF29043134 583660—68,72650616—251-1437265-3W8D25PF29013134 583661—179650718—201-1437265-4W8D25PF29063136 583671—70650719—141-1437265-5W8D25PF29093136 583679—68,72650728—191-1437265-6W8D28PF29013134 583680—165,167678034—1071-1437265-7W8D28PF29093136 583685—165,167678035—1111-1437266-098230150 583691—162687775—1551-1437266-198231150 583692—68,72810992—1781-1437266-698236150 583694—661320420—1851-1437266-898238150 583714—721338600—1841-1437267-0A6D10RA29AM23356 583715—68,721437266—1511-1437267-1A6D10RA29C56 583717—1571490560—1501-1437267-2A6D10RA29E56 583718—1571490563—1501-1437267-3A6D10WW29A354 583722—165,1671571235—1091-1437267-4A6D12DS29C254 189 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Part Number Cross Reference—Tyco Part Number to Acquired Part Number Tyco A c q u i r e d Tyco A c q u i r e d Tyco A c q u i r e d P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r 1-1437267-5A6D12RA29A542-1437263-8C7D28PF290131443-1437260-8C8D22PF29013140 1-1437267-6A6D12WW29A3542-1437263-9C7D28PF290231423-1437262-3C6D36PF29013148 1-1437267-7A6D15DS29A2542-1437264-2C1D50PF290131313-1437262-4C6D36PF29023146 1-1437267-9A6D15DS29C2542-1437264-3C1D50PF290151313-1437262-6C6D43PF29013148 1-1437268-1A7D15DS29A2492-1437264-4C1D50PF290171323-1437262-8C6D43PF29022146 1-1437268-2A7D15DS29C2492-1437265-0W8D30PF290131343-1437262-9C6D43PF29023146 1-1437268-3A7D15RA29C522-1437265-1W8D30PF290431343-1437263-1C7D30PF29013144 1-1437268-4A7D15RA29E522-1437265-3W8D35PF290131343-1437263-2C7D30PF29023142 1-1437268-5A7D15WW29A3492-1437265-5W8D35PF290631363-1437263-3C7D30PF29043144 1-1437268-6A7D18DS29A2492-1437265-6W8D36PF290131343-1437263-9C7D35PF29012144 1-1437268-7A7D18DS29B2492-1437265-7W8D36PF290431343-1437264-3C6D36DS29C339 1-1437268-8A7D18WW29A3492-1437265-8W8D36PF290931363-1437264-4C9D020PF60048129 1-1437268-9A7D22DS29C2492-1437267-0A6D15RA29E563-1437264-5C9D030PF60048129 1-1437269-9A8D10DS29A2432-1437267-1A6D15WW29A3543-1437264-6C9D060PF60048129 1-1437270-0A8D31WW29A3442-1437267-2A6D18DS29A2543-1437265-0W8D40PF29013134 1-1437270-2A8D35DS29A2432-1437267-3A6D18DS29C2543-1437265-4W8D50PF29012134 1-1437270-3A8D35DS29C2432-1437267-4A6D18RA29A563-1437265-5W8D50PF29013134 1-1437270-4A8D35RA29C462-1437267-5A6D18WW29A3543-1437265-6W8D50PF29043134 1-1437270-5A8D35WW29A3442-1437267-7A6D22DS29A2543-1437265-7W8D50PF29062136 1-1437270-6A8D36DS29A2432-1437267-8A6D22DS29B2543-1437265-9W8D60PF29013134 1-1437270-7A8D36DS29B3432-1437267-9A6D22DS29C2543-1437266-598336150 1-1437270-8A8D36DS29C2432-1437268-1A7D25DS29A2493-1437266-99836701151 1-1437270-9A8D36DS29C3432-1437268-2A7D25RA29FM232513-1437267-0A6D22RA29A56 1-1437273-3C6D06DS29A1392-1437268-3A7D28DS29A2493-1437267-1A6D22RA29C56 1-1437273-4C6D06DS29C1392-1437268-4A7D28DS29B2493-1437267-2A6D22WW29A354 1-1437273-5C6D06DS29C3392-1437268-5A7D28DS29C2493-1437267-4A6D25DS29C254 1-1437273-6C6D06DS29D1392-1437268-8A7D28RA29AM231513-1437267-5A6D28DS29A254 1-1437273-7C6D06DS29D3392-1437268-9A7D28RA29C523-1437267-6A6D28DS29C254 1-1437273-8C6D06DS29D4402-1437269-0A8D10DS29C2433-1437267-7A6D28RA29A56 1-1437273-9C6D10DS29A1392-1437269-1A8D10RA29A463-1437267-8A6D28RA29C56 1-1437274-0C7D22DS29D3362-1437269-2A8D10RA29C463-1437267-9A6D28RA29E56 1-1437274-1C7D25DS29C1362-1437269-3A8D10RA29CM233473-1437268-0A7D28RA29CM23251 1-1437274-3C7D28DS29A1362-1437269-4A8D10RA29E463-1437268-1A7D28RA29E52 1-1437274-4C7D28DS29A3362-1437269-5A8D10WW29A3443-1437268-2A7D28RA29EM23151 1-1437274-6C7D28DS29B3362-1437269-7A8D12DS29A2433-1437268-3A7D28WW29A349 1-1437274-7C7D28DS29C1362-1437269-8A8D12DS29C2433-1437268-4A7D30DS29A249 1-1437274-8C7D28DS29C3362-1437269-9A8D12RA29C463-1437268-5A7D30DS29C249 1-1437274-9C7D28DS29D1362-1437270-0A8D36RA29A463-1437268-6A7D30RA29AM23151 1-1437276-0C8D35DS29A1312-1437270-1A8D36RA29C463-1437268-7A7D30WW29A349 1-1437276-1C8D35DS29A3322-1437270-2A8D36RA29E463-1437268-8A7D35DS29A249 1-1437276-3C8D35DS29C3322-1437270-3A8D36RA29EM233473-1437268-9A7D35DS29C249 1-1437276-4C8D35DS29E3322-1437270-4A8D36WW29A3443-1437269-0A8D12RA29E46 1-1437276-5C8D36DS29A3322-1437270-6A8D40DS29A3433-1437269-1A8D12RA29EM23347 1-1437276-6C8D36DS29C1312-1437270-7A8D40DS29C2433-1437269-2A8D12WW29A344 1-1437276-8C8D36DS29C2312-1437270-8A8D40RA29E463-1437269-8A8D15DS29A243 1-1437276-9C8D36DS29C3322-1437270-9A8D40WW29A3443-1437269-9A8D15DS29C243 1437260-498203021512-1437273-0C6D10DS29B3393-1437270-0A8D43DS29C243 1437260-598203051512-1437273-1C6D10DS29C1393-1437270-1A8D43RA29A46 1437260-698363011512-1437273-2C6D10DS29C4403-1437270-2A8D43RA29C46 1437260-798367021512-1437273-3C6D12DS29A4403-1437270-3A8D43RA29E46 1437266-398180021512-1437273-4C6D12DS29C1393-1437270-4A8D43WW29A344 1437266-498180041512-1437273-5C6D12DS29C3393-1437270-5A8D44DS29A243 1437266-598180051512-1437273-6C6D15DS29A1393-1437270-6A8D44DS29C243 1437266-698203011512-1437273-7C6D15DS29B3393-1437270-7A8D44DS29C344 1437266-798204011512-1437273-8C6D15DS29C1393-1437270-8A8D44RA29CM23347 1437266-8982061502-1437273-9C6D15DS29C3393-1437270-9A8D50DS29A243 1437266-9982241502-1437274-0C7D28DS29D3363-1437273-0C6D15DS29D139 1437274-1982931502-1437274-2C7D28DS29E3363-1437273-1C6D15DS29D339 2-1437260-0C8D10PF290131402-1437274-3C7D28PF290321423-1437273-2C6D18DS29A139 2-1437260-2C8D10PF290231382-1437274-4C7D30DS29A3363-1437273-3C6D18DS29A339 2-1437260-3C8D10PF290431402-1437274-5C7D30DS29C3363-1437273-4C6D18DS29C139 2-1437260-4C8D12PF290131402-1437274-6C7D30DS29C4373-1437273-5C6D22DS29A139 2-1437260-5C8D12PF290231382-1437274-7C7D30PF290321423-1437273-6C6D22DS29A339 2-1437260-6C8D12PF290431402-1437274-8C7D31DS29A3363-1437273-7C6D22DS29B440 2-1437260-7C8D15PF290131402-1437274-9C7D31DS29C3363-1437273-8C6D22DS29C139 2-1437260-9C8D15PF290231382-1437275-9C8D06DS29C1313-1437273-9C6D22DS29D139 2-1437262-0C6D22PF290431482-1437276-0C8D36DS29D1313-1437274-0C7D31DS29D336 2-1437262-4C6D28PF290131482-1437276-1C8D36DS29D2313-1437274-1C7D35DS29C136 2-1437262-6C6D28PF290231462-1437276-2C8D36DS29D3323-1437274-2C7D36DS29C136 2-1437262-7C6D28PF290331462-1437276-3C8D36DS29E3323-1437274-3C7D36DS29C336 2-1437262-8C6D28PF290431482-1437276-5C8D40DS29A1313-1437274-4C7D36DS29D336 2-1437262-9C6D30PF290231462-1437276-6C8D40DS29A3323-1437274-6C7D40DS29C136 2-1437263-0C7D20PF290131442-1437276-7C8D40DS29C1313-1437274-7C7D40DS29C336 2-1437263-1C7D20PF290231422-1437276-9C8D40DS29C3323-1437274-8C7D40DS29D336 2-1437263-3C7D22PF290131443-1437260-0C8D15PF290431403-1437274-9C7D43DS29C136 2-1437263-4C7D22PF290231423-1437260-5C8D20PF290231383-1437275-0C8D06DS29C231 2-1437263-7C7D28PF290121443-1437260-6C8D20PF290431403-1437275-1C8D06DS29C332 190 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Part Number Cross Reference—Tyco Part Number to Acquired Part Number Tyco A c q u i r e d Tyco A c q u i r e d Tyco A c q u i r e d P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r 3-1437275-2C8D06DS29E1314-1437274-8C7D50DS29D3366-1437260-9C8D31PF29133140 3-1437275-5C8D10DS29A3324-1437275-0C8D10DS29D1316-1437268-0A7D50RA29A52 3-1437275-6C8D10DS29C1314-1437275-1C8D10DS29D3326-1437268-1A7D50WW29A349 3-1437275-8C8D10DS29C2314-1437275-5C8D12DS29C1316-1437268-2A7D50WW29B349 3-1437275-9C8D10DS29C3324-1437275-7C8D12DS29C3326-1437269-0A8D20WW29A344 3-1437276-0C8D40DS29D1314-1437275-8C8D12DS29D1316-1437269-1A8D22DS29A243 3-1437276-1C8D40DS29D3324-1437276-0C8D50DS29C1316-1437269-2A8D22DS29C243 3-1437276-2C8D43DS29C1314-1437276-2C8D50DS29C3326-1437269-4A8D22RA29A46 3-1437276-3C8D43DS29C3324-1437276-3C8D50DS29D1316-1437269-5A8D22RA29C46 3-1437276-4C8D43DS29D3324-1437276-6C8D52DS29C1M191296-1437269-6A8D22RA29E46 3-1437276-5C8D43DS29E1314-1437276-7C8D52DS29C1M195296-1437269-7A8D22RA29EM23347 3-1437276-8C8D50DS29A1315-1437260-5C8D28PF290231386-1437269-8A8D22WW29A344 3-1437276-9C8D50DS29A3325-1437260-6C8D30PF290131406-1437269-9A8D25DS29A243 4-1437260-0C8D22PF290231385-1437260-8C8D30PF290231386-1437270-0A8D65DS29D243 4-1437260-1C8D22PF290431405-1437263-0C7D43PF290131446-1437270-6A8D28RA29C46 4-1437260-5C8D25PF290131405-1437263-1C7D50DS29B3366-1437273-0C6D43DS29A440 4-1437260-8C8D25PF290231385-1437263-2C7D50PF290131446-1437273-1C6D43DS29B139 4-1437260-9C8D25PF290331385-1437263-3C7D50PF290331426-1437273-2C6D43DS29C139 4-1437262-0C6D43PF290431485-1437263-4C7D50PF290431446-1437273-4C6D43DS29C339 4-1437263-0C7D35PF290131445-1437263-7C7D50PF291431426-1437273-6C6D43DS29D339 4-1437263-1C7D36PF290121445-1437267-0A6D43DS29C3546-1437275-1C8D18DS29C332 4-1437263-2C7D36PF290131445-1437267-1A6D43RA29AM233566-1437275-2C8D18DS29D131 4-1437263-3C7D36PF290331425-1437267-2A6D43RA29C566-1437275-3C8D18DS29D332 4-1437263-4C7D40PF290121445-1437267-3A6D43RA29E566-1437275-4C8D18DS29E131 4-1437263-5C7D40PF290131445-1437267-4A6D43WW29A3546-1437275-6C8D20DS29C131 4-1437263-6C7D40PF290231425-1437268-0A7D40WW29B3496-1437275-8C8D20DS29C332 4-1437263-7C7D40PF290321425-1437268-2A7D43DS29A2496-1437275-9C8D20DS29D131 4-1437263-8C7D40PF290431445-1437268-3A7D43DS29C2497-1437260-3C8D35PF29023138 4-1437267-0A6D28RA29EM233565-1437268-4A7D43WW29A3497-1437260-7C8D36PF29013140 4-1437267-1A6D28WW29A3545-1437268-5A7D50DS29A2497-1437260-9C8D36PF29022138 4-1437267-2A6D36DS29A2545-1437268-6A7D50DS29C2497-1437269-0A8D25DS29B243 4-1437267-3A6D36DS29A3545-1437268-8A7D50DS29D2497-1437269-1A8D25DS29C243 4-1437267-4A6D36DS29C2545-1437269-0A8D18DS29C3437-1437269-2A8D25DS29C343 4-1437267-5A6D36RA29E565-1437269-1A8D18RA29C467-1437269-3A8D25RA29A46 4-1437267-6A6D36WW29A3545-1437269-2A8D18RA29CM233477-1437269-4A8D25RA29AM23347 4-1437267-7A6D43DS29A2545-1437269-3A8D18RA29FM233477-1437269-5A8D25RA29C46 4-1437267-8A6D43DS29A3545-1437269-4A8D18WW29A3447-1437269-6A8D25RA29CM23347 4-1437267-9A6D43DS29C2545-1437269-6A8D20DS29B2437-1437269-7A8D25RA29E46 4-1437268-0A7D35RA29A525-1437269-7A8D20DS29C2437-1437269-8A8D25RA29FM23347 4-1437268-1A7D36DS29A2495-1437269-8A8D20RA29C467-1437269-9A8D25WW29A344 4-1437268-2A7D36DS29C2495-1437269-9A8D20RA29E467-1437275-0C8D20DS29D332 4-1437268-3A7D36RA29AM232515-1437270-1A8D60DS29A2437-1437275-1C8D22DS29A131 4-1437268-4A7D36WW29A3495-1437270-2A8D60DS29C2437-1437275-2C8D22DS29A332 4-1437268-6A7D40DS29C2495-1437270-3A8D60DS29C3447-1437275-3C8D22DS29B131 4-1437268-8A7D40RA29E525-1437270-5A8D60RA29A467-1437275-4C8D22DS29C131 4-1437268-9A7D40WW29A3495-1437270-6A8D60WW29A3447-1437275-6C8D22DS29C332 4-1437269-0A8D15DS29D2435-1437270-9A8D65DS29C2437-1437275-7C8D22DS29D131 4-1437269-1A8D15RA29C465-1437273-0C6D30DS29D3397-1437275-8C8D25DS29A131 4-1437269-2A8D15RA29CM233475-1437273-1C6D30DS29D4407-1437275-9C8D25DS29A332 4-1437269-3A8D15RA29E465-1437273-2C6D31DS29A1398-1437260-0C8D36PF29023138 4-1437269-4A8D15RA29EM233475-1437273-3C6D36DS29A3398-1437260-1C8D36PF29033138 4-1437269-5A8D15RA29FM233475-1437273-4C6D36DS29C1398-1437260-2C8D36PF29043140 4-1437269-6A8D15WW29A3445-1437273-5C6D36DS29D1398-1437260-4C8D40PF29023138 4-1437269-8A8D18DS29A2435-1437273-6C6D36DS29D4408-1437260-6C8D40PF29043140 4-1437269-9A8D18DS29C2435-1437273-7C6D36DS29E4408-1437260-9C8D43PF29012140 4-1437270-0A8D50DS29C2435-1437273-8C6D40DS29B3398-1437269-1A8D28DS29A243 4-1437270-1A8D50DS29C3445-1437273-9C6D43DS29A1398-1437269-2A8D28DS29C243 4-1437270-2A8D50DS29D2435-1437274-0C7D50DS29E1368-1437269-3A8D28RA29E46 4-1437270-4A8D50RA29C465-1437274-1C8D12DS29E1318-1437269-5A8D30DS29A243 4-1437270-5A8D50RA29E465-1437275-1C8D15DS29B3328-1437269-6A8D30DS29B243 4-1437270-6A8D50RA29F465-1437275-2C8D15DS29C1318-1437269-7A8D30DS29C243 4-1437270-7A8D50WW29A3445-1437275-4C8D15DS29C3328-1437269-9A8D30DS29C343 4-1437273-0C6D22DS29D3395-1437275-5C8D15DS29D1318-1437275-0C8D25DS29C131 4-1437273-1C6D25DS29A3395-1437275-6C8D15DS29D2318-1437275-2C8D25DS29C332 4-1437273-2C6D25DS29C3395-1437275-9C8D18DS29C1318-1437275-3C8D25DS29D131 4-1437273-3C6D25DS29D1395-1437276-1C8D60DS29A1318-1437275-4C8D25DS29D332 4-1437273-4C6D28DS29C1395-1437276-2C8D60DS29A3328-1437275-5C8D28DS29C131 4-1437273-6C6D28DS29C3395-1437276-3C8D60DS29B3328-1437275-8C8D28DS29C332 4-1437273-7C6D28DS29D1395-1437276-4C8D60DS29C1318-1437275-9C8D28DS29D131 4-1437273-8C6D30DS29C1395-1437276-7C8D60DS29D1319-1437260-0C8D43PF29013140 4-1437273-9C6D30DS29C3395-1437276-8C8D60PF290131409-1437260-2C8D43PF29022138 4-1437274-0C7D43DS29C3366-1437260-1C8D30PF290431409-1437260-3C8D43PF29023138 4-1437274-1C7D43DS29D4376-1437260-4C8D30PF291331409-1437260-9C8D50PF29013140 4-1437274-3C7D50DS29A3366-1437260-5C8D31PF290131409-1437269-0A8D30DS29D243 4-1437274-4C7D50DS29C1366-1437260-6C8D31PF290231389-1437269-1A8D30DS29D243 4-1437274-5C7D50DS29C3366-1437260-7C8D31PF290431409-1437269-2A8D30RA29C46 4-1437274-6C7D50DS29C4376-1437260-8C8D31PF291321409-1437269-3A8D30RA29E46 191 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Part Number Cross Reference—Tyco Part Number to Acquired Part Number Tyco A c q u i r e d P a g e Part Part N u m b e r N u m b e rN u m b e r 9-1437269-4A8D30WW29A344 9-1437269-5A8D30WW29B344 9-1437269-8A8D31DS29A243 9-1437269-9A8D31DS29A343 9-1437275-0C8D28DS29D332 9-1437275-1C8D28PF29012140 9-1437275-3C8D30DS29C131 9-1437275-5C8D30DS29C332 9-1437275-6C8D30DS29D131 9-1437275-7C8D30DS29D332 9-1437275-8C8D30DS29E131 9-1437275-9C8D30DS29E332 AP3—149 BMEP 1K/2K—149 BMEP 3T/5T—149 MEP 6T/12T—149 Model G—184 SAHT—185 192 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired T y c o Acquired T y c o Acquired T y c o P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r —— — — — — —— — — —— —— ——— —— — —— — —— — —— — —— — —— ——— —— ——— ——— —— ——— ——— ——— ——— ——— —— —— ——— ——— —— —— ——— ——— —— —— —— —— — ——— —— ——— — ——— ——— — ——— —— —— —— ——— ——— —— — ——— ——— —— ——— —— —— —— —— — ——— —— ——— —— ——— ——— ——— —— ——— ——— ——— —— ——— — —— —— 193 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 4 91 - 1 4 3 7 2 6 8 - 8A 7 D 1 8 W W 2 9 A 35 4A 6 D 4 3 D S 2 9 B 25 4A 6 D 1 8 D S 2 9 B 2 5 1A 7 D 1 8 R A 2 9 F M 2 3 25 44 - 1 4 3 7 2 6 7 - 8A 6 D 4 3 D S 2 9 A 35 4A 6 D 1 8 D S 2 9 A 3 5 1A 7 D 1 8 R A 2 9 F M 2 3 15 44 - 1 4 3 7 2 6 7 - 7A 6 D 4 3 D S 2 9 A 25 42 - 1 4 3 7 2 6 7 - 2A 6 D 1 8 D S 2 9 A 2 5 2A 7 D 1 8 R A 2 9 F5 6A 6 D 4 0 R A 2 9 F M 2 3 35 4A 6 D 1 5 W W 2 9 B 3 5 1A 7 D 1 8 R A 2 9 E M 2 3 25 6A 6 D 4 0 R A 2 9 F5 42 - 1 4 3 7 2 6 7 - 1A 6 D 1 5 W W 2 9 A 3 5 1A 7 D 1 8 R A 2 9 E M 2 3 15 6A 6 D 4 0 R A 2 9 E M 2 3 35 6A 6 D 1 5 R A 2 9 F M 2 3 3 5 2A 7 D 1 8 R A 2 9 E5 6A 6 D 4 0 R A 2 9 E5 6A 6 D 1 5 R A 2 9 F 5 1A 7 D 1 8 R A 2 9 C M 2 3 25 6A 6 D 4 0 R A 2 9 C M 2 3 35 6A 6 D 1 5 R A 2 9 E M 2 3 3 5 1A 7 D 1 8 R A 2 9 C M 2 3 15 6A 6 D 4 0 R A 2 9 C5 62 - 1 4 3 7 2 6 7 - 0A 6 D 1 5 R A 2 9 E 5 2A 7 D 1 8 R A 2 9 C5 6A 6 D 4 0 R A 2 9 A M 2 3 35 6A 6 D 1 5 R A 2 9 C M 2 3 3 5 1A 7 D 1 8 R A 2 9 A M 2 3 25 6A 6 D 4 0 R A 2 9 A5 6A 6 D 1 5 R A 2 9 C 5 1A 7 D 1 8 R A 2 9 A M 2 3 15 4A 6 D 3 6 W W 2 9 B 35 6A 6 D 1 5 R A 2 9 A M 2 3 3 5 2A 7 D 1 8 R A 2 9 A5 44 - 1 4 3 7 2 6 7 - 6A 6 D 3 6 W W 2 9 A 35 6A 6 D 1 5 R A 2 9 A 4 9A 7 D 1 8 D S 2 9 E 25 6A 6 D 3 6 R A 2 9 F M 2 3 35 4A 6 D 1 5 D S 2 9 C 3 4 9A 7 D 1 8 D S 2 9 D 25 6A 6 D 3 6 R A 2 9 F5 41 - 1 4 3 7 2 6 7 - 9A 6 D 1 5 D S 2 9 C 2 4 9A 7 D 1 8 D S 2 9 C 25 6A 6 D 3 6 R A 2 9 E M 2 3 35 4A 6 D 1 5 D S 2 9 B 3 4 91 - 1 4 3 7 2 6 8 - 7A 7 D 1 8 D S 2 9 B 25 64 - 1 4 3 7 2 6 7 - 5A 6 D 3 6 R A 2 9 E5 4A 6 D 1 5 D S 2 9 B 2 4 91 - 1 4 3 7 2 6 8 - 6A 7 D 1 8 D S 2 9 A 25 6A 6 D 3 6 R A 2 9 C M 2 3 35 4A 6 D 1 5 D S 2 9 A 3 4 9A 7 D 1 5 W W 2 9 B 35 6A 6 D 3 6 R A 2 9 C5 41 - 1 4 3 7 2 6 7 - 7A 6 D 1 5 D S 2 9 A 2 4 91 - 1 4 3 7 2 6 8 - 5A 7 D 1 5 W W 2 9 A 35 6A 6 D 3 6 R A 2 9 A M 2 3 35 4A 6 D 1 2 W W 2 9 B 3 5 1A 7 D 1 5 R A 2 9 F M 2 3 25 6A 6 D 3 6 R A 2 9 A5 41 - 1 4 3 7 2 6 7 - 6A 6 D 1 2 W W 2 9 A 3 5 1A 7 D 1 5 R A 2 9 F M 2 3 15 4A 6 D 3 6 D S 2 9 C 35 6A 6 D 1 2 R A 2 9 F M 2 3 3 5 2A 7 D 1 5 R A 2 9 F5 44 - 1 4 3 7 2 6 7 - 4A 6 D 3 6 D S 2 9 C 25 6A 6 D 1 2 R A 2 9 F 5 1A 7 D 1 5 R A 2 9 E M 2 3 25 4A 6 D 3 6 D S 2 9 B 35 6A 6 D 1 2 R A 2 9 E M 2 3 3 5 1A 7 D 1 5 R A 2 9 E M 2 3 15 4A 6 D 3 6 D S 2 9 B 25 6A 6 D 1 2 R A 2 9 E 5 21 - 1 4 3 7 2 6 8 - 4A 7 D 1 5 R A 2 9 E5 44 - 1 4 3 7 2 6 7 - 3A 6 D 3 6 D S 2 9 A 35 6A 6 D 1 2 R A 2 9 C M 2 3 3 5 1A 7 D 1 5 R A 2 9 C M 2 3 25 44 - 1 4 3 7 2 6 7 - 2A 6 D 3 6 D S 2 9 A 25 6A 6 D 1 2 R A 2 9 C 5 1A 7 D 1 5 R A 2 9 C M 2 3 15 4A 6 D 2 8 W W 2 9 B 35 6A 6 D 1 2 R A 2 9 A M 2 3 3 5 21 - 1 4 3 7 2 6 8 - 3A 7 D 1 5 R A 2 9 C5 44 - 1 4 3 7 2 6 7 - 1A 6 D 2 8 W W 2 9 A 35 41 - 1 4 3 7 2 6 7 - 5A 6 D 1 2 R A 2 9 A 5 1A 7 D 1 5 R A 2 9 A M 2 3 25 6A 6 D 2 8 R A 2 9 F M 2 3 35 4A 6 D 1 2 D S 2 9 C 3 5 1A 7 D 1 5 R A 2 9 A M 2 3 15 6A 6 D 2 8 R A 2 9 F5 41 - 1 4 3 7 2 6 7 - 4A 6 D 1 2 D S 2 9 C 2 5 2A 7 D 1 5 R A 2 9 A5 64 - 1 4 3 7 2 6 7 - 0A 6 D 2 8 R A 2 9 E M 2 3 35 4A 6 D 1 2 D S 2 9 B 3 4 9A 7 D 1 5 D S 2 9 E 25 63 - 1 4 3 7 2 6 7 - 9A 6 D 2 8 R A 2 9 E5 4A 6 D 1 2 D S 2 9 B 2 4 9A 7 D 1 5 D S 2 9 D 25 6A 6 D 2 8 R A 2 9 C M 2 3 35 4A 6 D 1 2 D S 2 9 A 3 4 91 - 1 4 3 7 2 6 8 - 2A 7 D 1 5 D S 2 9 C 25 63 - 1 4 3 7 2 6 7 - 8A 6 D 2 8 R A 2 9 C5 4A 6 D 1 2 D S 2 9 A 2 4 9A 7 D 1 5 D S 2 9 B 25 6A 6 D 2 8 R A 2 9 A M 2 3 35 4A 6 D 1 0 W W 2 9 B 3 4 91 - 1 4 3 7 2 6 8 - 1A 7 D 1 5 D S 2 9 A 25 63 - 1 4 3 7 2 6 7 - 7A 6 D 2 8 R A 2 9 A5 41 - 1 4 3 7 2 6 7 - 3A 6 D 1 0 W W 2 9 A 3 4 9A 7 D 1 0 W W 2 9 B 35 4A 6 D 2 8 D S 2 9 C 35 6A 6 D 1 0 R A 2 9 F M 2 3 3 4 90 - 1 4 3 7 2 6 8 - 9A 7 D 1 0 W W 2 9 A 35 43 - 1 4 3 7 2 6 7 - 6A 6 D 2 8 D S 2 9 C 25 6A 6 D 1 0 R A 2 9 F 5 1A 7 D 1 0 R A 2 9 F M 2 3 25 4A 6 D 2 8 D S 2 9 B 35 6A 6 D 1 0 R A 2 9 E M 2 3 3 5 1A 7 D 1 0 R A 2 9 F M 2 3 15 4A 6 D 2 8 D S 2 9 B 25 61 - 1 4 3 7 2 6 7 - 2A 6 D 1 0 R A 2 9 E 5 2A 7 D 1 0 R A 2 9 F5 4A 6 D 2 8 D S 2 9 A 35 6A 6 D 1 0 R A 2 9 C M 2 3 3 5 1A 7 D 1 0 R A 2 9 E M 2 3 25 43 - 1 4 3 7 2 6 7 - 5A 6 D 2 8 D S 2 9 A 25 61 - 1 4 3 7 2 6 7 - 1A 6 D 1 0 R A 2 9 C 5 1A 7 D 1 0 R A 2 9 E M 2 3 15 4A 6 D 2 5 W W 2 9 B 35 61 - 1 4 3 7 2 6 7 - 0A 6 D 1 0 R A 2 9 A M 2 3 3 5 2A 7 D 1 0 R A 2 9 E5 4A 6 D 2 5 W W 2 9 A 35 60 - 1 4 3 7 2 6 7 - 9A 6 D 1 0 R A 2 9 A 5 1A 7 D 1 0 R A 2 9 C M 2 3 25 6A 6 D 2 5 R A 2 9 F M 2 3 35 40 - 1 4 3 7 2 6 7 - 8A 6 D 1 0 D S 2 9 C 3 5 1A 7 D 1 0 R A 2 9 C M 2 3 15 6A 6 D 2 5 R A 2 9 F5 40 - 1 4 3 7 2 6 7 - 7A 6 D 1 0 D S 2 9 C 2 5 2A 7 D 1 0 R A 2 9 C5 6A 6 D 2 5 R A 2 9 E M 2 3 35 4A 6 D 1 0 D S 2 9 B 3 5 1A 7 D 1 0 R A 2 9 A M 2 3 25 6A 6 D 2 5 R A 2 9 E5 4A 6 D 1 0 D S 2 9 B 2 5 10 - 1 4 3 7 2 6 8 - 8A 7 D 1 0 R A 2 9 A M 2 3 15 6A 6 D 2 5 R A 2 9 C M 2 3 35 4A 6 D 1 0 D S 2 9 A 3 5 2A 7 D 1 0 R A 2 9 A5 6A 6 D 2 5 R A 2 9 C5 40 - 1 4 3 7 2 6 7 - 6A 6 D 1 0 D S 2 9 A 2 4 9A 7 D 1 0 D S 2 9 E 25 6A 6 D 2 5 R A 2 9 A M 2 3 35 4A 6 D 0 6 W W 2 9 B 3 4 9A 7 D 1 0 D S 2 9 D 25 6A 6 D 2 5 R A 2 9 A5 4A 6 D 0 6 W W 2 9 A 3 4 90 - 1 4 3 7 2 6 8 - 7A 7 D 1 0 D S 2 9 C 25 4A 6 D 2 5 D S 2 9 C 35 6A 6 D 0 6 R A 2 9 F M 2 3 3 4 9A 7 D 1 0 D S 2 9 B 25 43 - 1 4 3 7 2 6 7 - 4A 6 D 2 5 D S 2 9 C 25 6A 6 D 0 6 R A 2 9 F 4 9A 7 D 1 0 D S 2 9 A 25 4A 6 D 2 5 D S 2 9 B 35 6A 6 D 0 6 R A 2 9 E M 2 3 3 4 9A 7 D 0 6 W W 2 9 B 35 4A 6 D 2 5 D S 2 9 B 25 6A 6 D 0 6 R A 2 9 E 4 9A 7 D 0 6 W W 2 9 A 35 4A 6 D 2 5 D S 2 9 A 35 6A 6 D 0 6 R A 2 9 C M 2 3 3 5 1A 7 D 0 6 R A 2 9 F M 2 3 25 4A 6 D 2 5 D S 2 9 A 25 6A 6 D 0 6 R A 2 9 C 5 1A 7 D 0 6 R A 2 9 F M 2 3 15 4A 6 D 2 2 W W 2 9 B 35 6A 6 D 0 6 R A 2 9 A M 2 3 3 5 2A 7 D 0 6 R A 2 9 F5 43 - 1 4 3 7 2 6 7 - 2A 6 D 2 2 W W 2 9 A 35 6A 6 D 0 6 R A 2 9 A 5 1A 7 D 0 6 R A 2 9 E M 2 3 25 6A 6 D 2 2 R A 2 9 F M 2 3 35 4A 6 D 0 6 D S 2 9 C 3 5 1A 7 D 0 6 R A 2 9 E M 2 3 15 6A 6 D 2 2 R A 2 9 F5 4A 6 D 0 6 D S 2 9 C 2 5 20 - 1 4 3 7 2 6 8 - 6A 7 D 0 6 R A 2 9 E5 6A 6 D 2 2 R A 2 9 E M 2 3 35 4A 6 D 0 6 D S 2 9 B 3 5 1A 7 D 0 6 R A 2 9 C M 2 3 25 6A 6 D 2 2 R A 2 9 E5 4A 6 D 0 6 D S 2 9 B 2 5 1A 7 D 0 6 R A 2 9 C M 2 3 15 6A 6 D 2 2 R A 2 9 C M 2 3 35 40 - 1 4 3 7 2 6 7 - 5A 6 D 0 6 D S 2 9 A 3 5 20 - 1 4 3 7 2 6 8 - 5A 7 D 0 6 R A 2 9 C5 63 - 1 4 3 7 2 6 7 - 1A 6 D 2 2 R A 2 9 C5 4A 6 D 0 6 D S 2 9 A 2 5 1A 7 D 0 6 R A 2 9 A M 2 3 25 6A 6 D 2 2 R A 2 9 A M 2 3 31 5 11 4 3 7 2 6 0 - 79 8 3 6 7 0 2 5 1A 7 D 0 6 R A 2 9 A M 2 3 15 63 - 1 4 3 7 2 6 7 - 0A 6 D 2 2 R A 2 9 A1 5 13 - 1 4 3 7 2 6 6 - 99 8 3 6 7 0 1 5 2A 7 D 0 6 R A 2 9 A5 4A 6 D 2 2 D S 2 9 C 31 5 11 4 3 7 2 6 0 - 69 8 3 6 3 0 1 4 9A 7 D 0 6 D S 2 9 E 25 42 - 1 4 3 7 2 6 7 - 9A 6 D 2 2 D S 2 9 C 21 5 11 4 3 7 2 6 6 - 79 8 2 0 4 0 1 4 9A 7 D 0 6 D S 2 9 D 25 4A 6 D 2 2 D S 2 9 B 31 5 11 4 3 7 2 6 0 - 59 8 2 0 3 0 5 4 90 - 1 4 3 7 2 6 8 - 4A 7 D 0 6 D S 2 9 C 25 42 - 1 4 3 7 2 6 7 - 8A 6 D 2 2 D S 2 9 B 21 5 19 8 2 0 3 0 3 4 9A 7 D 0 6 D S 2 9 B 25 4A 6 D 2 2 D S 2 9 A 31 5 11 4 3 7 2 6 0 - 49 8 2 0 3 0 2 4 9A 7 D 0 6 D S 2 9 A 25 42 - 1 4 3 7 2 6 7 - 7A 6 D 2 2 D S 2 9 A 21 5 11 4 3 7 2 6 6 - 69 8 2 0 3 0 1 5 4A 6 D 4 3 W W 2 9 B 35 4A 6 D 1 8 W W 2 9 B 31 5 11 4 3 7 2 6 6 - 59 8 1 8 0 0 5 5 45 - 1 4 3 7 2 6 7 - 4A 6 D 4 3 W W 2 9 A 35 42 - 1 4 3 7 2 6 7 - 5A 6 D 1 8 W W 2 9 A 31 5 11 4 3 7 2 6 6 - 49 8 1 8 0 0 4 5 6A 6 D 4 3 R A 2 9 F M 2 3 35 6A 6 D 1 8 R A 2 9 F M 2 3 31 5 19 8 1 8 0 0 3 5 6A 6 D 4 3 R A 2 9 F5 6A 6 D 1 8 R A 2 9 F1 5 11 4 3 7 2 6 6 - 39 8 1 8 0 0 2 5 6A 6 D 4 3 R A 2 9 E M 2 3 35 6A 6 D 1 8 R A 2 9 E M 2 3 31 5 19 8 1 8 0 0 1 5 65 - 1 4 3 7 2 6 7 - 3A 6 D 4 3 R A 2 9 E5 6A 6 D 1 8 R A 2 9 E1 5 03 - 1 4 3 7 2 6 6 - 59 8 3 3 6 5 6A 6 D 4 3 R A 2 9 C M 2 3 35 6A 6 D 1 8 R A 2 9 C M 2 3 31 5 01 4 3 7 2 7 4 - 19 8 2 9 3 5 65 - 1 4 3 7 2 6 7 - 2A 6 D 4 3 R A 2 9 C5 6A 6 D 1 8 R A 2 9 C1 5 01 - 1 4 3 7 2 6 6 - 89 8 2 3 8 5 65 - 1 4 3 7 2 6 7 - 1A 6 D 4 3 R A 2 9 A M 2 3 35 6A 6 D 1 8 R A 2 9 A M 2 3 31 5 01 - 1 4 3 7 2 6 6 - 69 8 2 3 6 5 6A 6 D 4 3 R A 2 9 A5 62 - 1 4 3 7 2 6 7 - 4A 6 D 1 8 R A 2 9 A1 5 01 - 1 4 3 7 2 6 6 - 19 8 2 3 1 5 45 - 1 4 3 7 2 6 7 - 0A 6 D 4 3 D S 2 9 C 35 4A 6 D 1 8 D S 2 9 C 31 5 01 - 1 4 3 7 2 6 6 - 09 8 2 3 0 5 44 - 1 4 3 7 2 6 7 - 9A 6 D 4 3 D S 2 9 C 25 42 - 1 4 3 7 2 6 7 - 3A 6 D 1 8 D S 2 9 C 21 5 01 4 3 7 2 6 6 - 99 8 2 2 4 5 4A 6 D 4 3 D S 2 9 B 35 4A 6 D 1 8 D S 2 9 B 31 5 01 4 3 7 2 6 6 - 89 8 2 0 6 Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired T y c o Acquired T y c o Acquired T y c o P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r ——— ——— — —— — ——— ——— —— —— ——— ——— ——— —— ——— —— —— —— —— — ——— ——— —— —— ——— —— ——— ——— ——— —— ——— —— —— —— —— — — — —— —— ——— —— —— — ——— —— —— —— ——— ——— —— — —— —— —— — ——— —— ——— — ——— —— ——— ——— ——— —— ——— —— ——— — — — —— ——— —— ——— —— ——— —— ——— — —— — —— — ——— 194 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 4 3A 8 D 2 5 D S 2 9 A 34 7A 8 D 1 0 R A 2 9 E M 2 3 35 1A 7 D 3 5 R A 2 9 F M 2 3 2 4 36 - 1 4 3 7 2 6 9 - 9A 8 D 2 5 D S 2 9 A 24 62 - 1 4 3 7 2 6 9 - 4A 8 D 1 0 R A 2 9 E5 1A 7 D 3 5 R A 2 9 F M 2 3 1 4 4A 8 D 2 2 W W 2 9 B 34 72 - 1 4 3 7 2 6 9 - 3A 8 D 1 0 R A 2 9 C M 2 3 35 2A 7 D 3 5 R A 2 9 F 4 46 - 1 4 3 7 2 6 9 - 8A 8 D 2 2 W W 2 9 A 34 62 - 1 4 3 7 2 6 9 - 2A 8 D 1 0 R A 2 9 C5 1A 7 D 3 5 R A 2 9 E M 2 3 2 4 76 - 1 4 3 7 2 6 9 - 7A 8 D 2 2 R A 2 9 E M 2 3 34 7A 8 D 1 0 R A 2 9 A M 2 3 35 1A 7 D 3 5 R A 2 9 E M 2 3 1 4 66 - 1 4 3 7 2 6 9 - 6A 8 D 2 2 R A 2 9 E4 62 - 1 4 3 7 2 6 9 - 1A 8 D 1 0 R A 2 9 A5 2A 7 D 3 5 R A 2 9 E 4 7A 8 D 2 2 R A 2 9 C M 2 3 34 3A 8 D 1 0 D S 2 9 E 35 1A 7 D 3 5 R A 2 9 C M 2 3 2 4 66 - 1 4 3 7 2 6 9 - 5A 8 D 2 2 R A 2 9 C4 3A 8 D 1 0 D S 2 9 E 25 1A 7 D 3 5 R A 2 9 C M 2 3 1 4 7A 8 D 2 2 R A 2 9 A M 2 3 34 3A 8 D 1 0 D S 2 9 D 35 2A 7 D 3 5 R A 2 9 C 4 66 - 1 4 3 7 2 6 9 - 4A 8 D 2 2 R A 2 9 A4 3A 8 D 1 0 D S 2 9 D 25 1A 7 D 3 5 R A 2 9 A M 2 3 2 4 3A 8 D 2 2 D S 2 9 C 34 3A 8 D 1 0 D S 2 9 C 35 1A 7 D 3 5 R A 2 9 A M 2 3 1 4 36 - 1 4 3 7 2 6 9 - 2A 8 D 2 2 D S 2 9 C 24 32 - 1 4 3 7 2 6 9 - 0A 8 D 1 0 D S 2 9 C 25 24 - 1 4 3 7 2 6 8 - 0A 7 D 3 5 R A 2 9 A 4 3A 8 D 2 2 D S 2 9 B 34 3A 8 D 1 0 D S 2 9 B 34 93 - 1 4 3 7 2 6 8 - 9A 7 D 3 5 D S 2 9 C 2 4 3A 8 D 2 2 D S 2 9 B 24 3A 8 D 1 0 D S 2 9 B 24 9A 7 D 3 5 D S 2 9 B 2 4 3A 8 D 2 2 D S 2 9 A 34 3A 8 D 1 0 D S 2 9 A 34 93 - 1 4 3 7 2 6 8 - 8A 7 D 3 5 D S 2 9 A 2 4 36 - 1 4 3 7 2 6 9 - 1A 8 D 2 2 D S 2 9 A 24 31 - 1 4 3 7 2 6 9 - 9A 8 D 1 0 D S 2 9 A 24 9A 7 D 3 0 W W 2 9 B 3 4 4A 8 D 2 0 W W 2 9 B 34 96 - 1 4 3 7 2 6 8 - 2A 7 D 5 0 W W 2 9 B 34 93 - 1 4 3 7 2 6 8 - 7A 7 D 3 0 W W 2 9 A 3 4 46 - 1 4 3 7 2 6 9 - 0A 8 D 2 0 W W 2 9 A 34 96 - 1 4 3 7 2 6 8 - 1A 7 D 5 0 W W 2 9 A 35 1A 7 D 3 0 R A 2 9 F M 2 3 2 4 7A 8 D 2 0 R A 2 9 E M 2 3 35 1A 7 D 5 0 R A 2 9 F M 2 3 25 1A 7 D 3 0 R A 2 9 F M 2 3 1 4 65 - 1 4 3 7 2 6 9 - 9A 8 D 2 0 R A 2 9 E5 1A 7 D 5 0 R A 2 9 F M 2 3 15 2A 7 D 3 0 R A 2 9 F 4 7A 8 D 2 0 R A 2 9 C M 2 3 35 2A 7 D 5 0 R A 2 9 F5 1A 7 D 3 0 R A 2 9 E M 2 3 2 4 65 - 1 4 3 7 2 6 9 - 8A 8 D 2 0 R A 2 9 C5 1A 7 D 5 0 R A 2 9 E M 2 3 25 1A 7 D 3 0 R A 2 9 E M 2 3 1 4 7A 8 D 2 0 R A 2 9 A M 2 3 35 1A 7 D 5 0 R A 2 9 E M 2 3 15 2A 7 D 3 0 R A 2 9 E 4 6A 8 D 2 0 R A 2 9 A5 2A 7 D 5 0 R A 2 9 E5 1A 7 D 3 0 R A 2 9 C M 2 3 2 4 3A 8 D 2 0 D S 2 9 C 35 1A 7 D 5 0 R A 2 9 C M 2 3 25 1A 7 D 3 0 R A 2 9 C M 2 3 1 4 35 - 1 4 3 7 2 6 9 - 7A 8 D 2 0 D S 2 9 C 25 1A 7 D 5 0 R A 2 9 C M 2 3 15 2A 7 D 3 0 R A 2 9 C 4 3A 8 D 2 0 D S 2 9 B 35 2A 7 D 5 0 R A 2 9 C5 1A 7 D 3 0 R A 2 9 A M 2 3 2 4 35 - 1 4 3 7 2 6 9 - 6A 8 D 2 0 D S 2 9 B 25 1A 7 D 5 0 R A 2 9 A M 2 3 25 13 - 1 4 3 7 2 6 8 - 6A 7 D 3 0 R A 2 9 A M 2 3 1 4 3A 8 D 2 0 D S 2 9 A 35 1A 7 D 5 0 R A 2 9 A M 2 3 15 2A 7 D 3 0 R A 2 9 A 4 3A 8 D 2 0 D S 2 9 A 25 26 - 1 4 3 7 2 6 8 - 0A 7 D 5 0 R A 2 9 A4 9A 7 D 3 0 D S 2 9 E 2 4 4A 8 D 1 8 W W 2 9 B 34 9A 7 D 5 0 D S 2 9 E 24 9A 7 D 3 0 D S 2 9 D 2 4 45 - 1 4 3 7 2 6 9 - 4A 8 D 1 8 W W 2 9 A 34 95 - 1 4 3 7 2 6 8 - 8A 7 D 5 0 D S 2 9 D 24 93 - 1 4 3 7 2 6 8 - 5A 7 D 3 0 D S 2 9 C 2 4 75 - 1 4 3 7 2 6 9 - 3A 8 D 1 8 R A 2 9 F M 2 3 34 95 - 1 4 3 7 2 6 8 - 6A 7 D 5 0 D S 2 9 C 24 9A 7 D 3 0 D S 2 9 B 2 4 6A 8 D 1 8 R A 2 9 F4 9A 7 D 5 0 D S 2 9 B 24 93 - 1 4 3 7 2 6 8 - 4A 7 D 3 0 D S 2 9 A 2 4 7A 8 D 1 8 R A 2 9 E M 2 3 34 95 - 1 4 3 7 2 6 8 - 5A 7 D 5 0 D S 2 9 A 24 9A 7 D 2 8 W W 2 9 B 3 4 6A 8 D 1 8 R A 2 9 E4 9A 7 D 4 3 W W 2 9 B 34 93 - 1 4 3 7 2 6 8 - 3A 7 D 2 8 W W 2 9 A 3 4 75 - 1 4 3 7 2 6 9 - 2A 8 D 1 8 R A 2 9 C M 2 3 34 95 - 1 4 3 7 2 6 8 - 4A 7 D 4 3 W W 2 9 A 35 1A 7 D 2 8 R A 2 9 F M 2 3 2 4 65 - 1 4 3 7 2 6 9 - 1A 8 D 1 8 R A 2 9 C5 1A 7 D 4 3 R A 2 9 F M 2 3 25 1A 7 D 2 8 R A 2 9 F M 2 3 1 4 7A 8 D 1 8 R A 2 9 A M 2 3 35 1A 7 D 4 3 R A 2 9 F M 2 3 15 2A 7 D 2 8 R A 2 9 F 4 6A 8 D 1 8 R A 2 9 A5 2A 7 D 4 3 R A 2 9 F5 1A 7 D 2 8 R A 2 9 E M 2 3 2 4 3A 8 D 1 8 D S 2 9 E 35 1A 7 D 4 3 R A 2 9 E M 2 3 25 13 - 1 4 3 7 2 6 8 - 2A 7 D 2 8 R A 2 9 E M 2 3 1 4 3A 8 D 1 8 D S 2 9 E 25 1A 7 D 4 3 R A 2 9 E M 2 3 15 23 - 1 4 3 7 2 6 8 - 1A 7 D 2 8 R A 2 9 E 4 3A 8 D 1 8 D S 2 9 D 35 2A 7 D 4 3 R A 2 9 E5 13 - 1 4 3 7 2 6 8 - 0A 7 D 2 8 R A 2 9 C M 2 3 2 4 3A 8 D 1 8 D S 2 9 D 25 1A 7 D 4 3 R A 2 9 C M 2 3 25 1A 7 D 2 8 R A 2 9 C M 2 3 1 4 35 - 1 4 3 7 2 6 9 - 0A 8 D 1 8 D S 2 9 C 35 1A 7 D 4 3 R A 2 9 C M 2 3 15 22 - 1 4 3 7 2 6 8 - 9A 7 D 2 8 R A 2 9 C 4 34 - 1 4 3 7 2 6 9 - 9A 8 D 1 8 D S 2 9 C 25 2A 7 D 4 3 R A 2 9 C5 1A 7 D 2 8 R A 2 9 A M 2 3 2 4 3A 8 D 1 8 D S 2 9 B 35 1A 7 D 4 3 R A 2 9 A M 2 3 25 12 - 1 4 3 7 2 6 8 - 8A 7 D 2 8 R A 2 9 A M 2 3 1 4 3A 8 D 1 8 D S 2 9 B 25 1A 7 D 4 3 R A 2 9 A M 2 3 15 2A 7 D 2 8 R A 2 9 A 4 3A 8 D 1 8 D S 2 9 A 35 2A 7 D 4 3 R A 2 9 A4 92 - 1 4 3 7 2 6 8 - 5A 7 D 2 8 D S 2 9 C 2 4 34 - 1 4 3 7 2 6 9 - 8A 8 D 1 8 D S 2 9 A 24 95 - 1 4 3 7 2 6 8 - 3A 7 D 4 3 D S 2 9 C 24 92 - 1 4 3 7 2 6 8 - 4A 7 D 2 8 D S 2 9 B 2 4 4A 8 D 1 5 W W 2 9 B 34 9A 7 D 4 3 D S 2 9 B 24 92 - 1 4 3 7 2 6 8 - 3A 7 D 2 8 D S 2 9 A 2 4 44 - 1 4 3 7 2 6 9 - 6A 8 D 1 5 W W 2 9 A 34 95 - 1 4 3 7 2 6 8 - 2A 7 D 4 3 D S 2 9 A 24 9A 7 D 2 5 W W 2 9 B 3 4 74 - 1 4 3 7 2 6 9 - 5A 8 D 1 5 R A 2 9 F M 2 3 34 95 - 1 4 3 7 2 6 8 - 0A 7 D 4 0 W W 2 9 B 34 9A 7 D 2 5 W W 2 9 A 3 4 6A 8 D 1 5 R A 2 9 F4 94 - 1 4 3 7 2 6 8 - 9A 7 D 4 0 W W 2 9 A 35 12 - 1 4 3 7 2 6 8 - 2A 7 D 2 5 R A 2 9 F M 2 3 2 4 74 - 1 4 3 7 2 6 9 - 4A 8 D 1 5 R A 2 9 E M 2 3 35 1A 7 D 4 0 R A 2 9 F M 2 3 25 1A 7 D 2 5 R A 2 9 F M 2 3 1 4 64 - 1 4 3 7 2 6 9 - 3A 8 D 1 5 R A 2 9 E5 1A 7 D 4 0 R A 2 9 F M 2 3 15 2A 7 D 2 5 R A 2 9 F 4 74 - 1 4 3 7 2 6 9 - 2A 8 D 1 5 R A 2 9 C M 2 3 35 2A 7 D 4 0 R A 2 9 F5 1A 7 D 2 5 R A 2 9 E M 2 3 2 4 64 - 1 4 3 7 2 6 9 - 1A 8 D 1 5 R A 2 9 C5 1A 7 D 4 0 R A 2 9 E M 2 3 25 1A 7 D 2 5 R A 2 9 E M 2 3 1 4 7A 8 D 1 5 R A 2 9 A M 2 3 35 1A 7 D 4 0 R A 2 9 E M 2 3 15 2A 7 D 2 5 R A 2 9 E 4 6A 8 D 1 5 R A 2 9 A5 24 - 1 4 3 7 2 6 8 - 8A 7 D 4 0 R A 2 9 E5 1A 7 D 2 5 R A 2 9 C M 2 3 2 4 3A 8 D 1 5 D S 2 9 E 35 1A 7 D 4 0 R A 2 9 C M 2 3 25 1A 7 D 2 5 R A 2 9 C M 2 3 1 4 3A 8 D 1 5 D S 2 9 E 25 1A 7 D 4 0 R A 2 9 C M 2 3 15 2A 7 D 2 5 R A 2 9 C 4 3A 8 D 1 5 D S 2 9 D 35 2A 7 D 4 0 R A 2 9 C5 1A 7 D 2 5 R A 2 9 A M 2 3 2 4 34 - 1 4 3 7 2 6 9 - 0A 8 D 1 5 D S 2 9 D 25 1A 7 D 4 0 R A 2 9 A M 2 3 25 1A 7 D 2 5 R A 2 9 A M 2 3 1 4 3A 8 D 1 5 D S 2 9 C 35 1A 7 D 4 0 R A 2 9 A M 2 3 15 2A 7 D 2 5 R A 2 9 A 4 33 - 1 4 3 7 2 6 9 - 9A 8 D 1 5 D S 2 9 C 25 2A 7 D 4 0 R A 2 9 A4 9A 7 D 2 5 D S 2 9 E 2 4 3A 8 D 1 5 D S 2 9 B 34 94 - 1 4 3 7 2 6 8 - 6A 7 D 4 0 D S 2 9 C 24 9A 7 D 2 5 D S 2 9 D 2 4 3A 8 D 1 5 D S 2 9 B 24 9A 7 D 4 0 D S 2 9 B 24 9A 7 D 2 5 D S 2 9 C 2 4 3A 8 D 1 5 D S 2 9 A 34 9A 7 D 4 0 D S 2 9 A 24 9A 7 D 2 5 D S 2 9 B 2 4 33 - 1 4 3 7 2 6 9 - 8A 8 D 1 5 D S 2 9 A 24 9A 7 D 3 6 W W 2 9 B 34 92 - 1 4 3 7 2 6 8 - 1A 7 D 2 5 D S 2 9 A 2 4 4A 8 D 1 2 W W 2 9 B 34 94 - 1 4 3 7 2 6 8 - 4A 7 D 3 6 W W 2 9 A 34 9A 7 D 2 2 W W 2 9 B 3 4 43 - 1 4 3 7 2 6 9 - 2A 8 D 1 2 W W 2 9 A 35 1A 7 D 3 6 R A 2 9 F M 2 3 24 9A 7 D 2 2 W W 2 9 A 3 4 73 - 1 4 3 7 2 6 9 - 1A 8 D 1 2 R A 2 9 E M 2 3 35 1A 7 D 3 6 R A 2 9 F M 2 3 15 1A 7 D 2 2 R A 2 9 F M 2 3 2 4 63 - 1 4 3 7 2 6 9 - 0A 8 D 1 2 R A 2 9 E5 2A 7 D 3 6 R A 2 9 F5 1A 7 D 2 2 R A 2 9 F M 2 3 1 4 7A 8 D 1 2 R A 2 9 C M 2 3 35 1A 7 D 3 6 R A 2 9 E M 2 3 25 2A 7 D 2 2 R A 2 9 F 4 62 - 1 4 3 7 2 6 9 - 9A 8 D 1 2 R A 2 9 C5 1A 7 D 3 6 R A 2 9 E M 2 3 15 1A 7 D 2 2 R A 2 9 E M 2 3 2 4 7A 8 D 1 2 R A 2 9 A M 2 3 35 2A 7 D 3 6 R A 2 9 E5 1A 7 D 2 2 R A 2 9 E M 2 3 1 4 6A 8 D 1 2 R A 2 9 A5 1A 7 D 3 6 R A 2 9 C M 2 3 25 2A 7 D 2 2 R A 2 9 E 4 3A 8 D 1 2 D S 2 9 C 35 1A 7 D 3 6 R A 2 9 C M 2 3 15 1A 7 D 2 2 R A 2 9 C M 2 3 2 4 32 - 1 4 3 7 2 6 9 - 8A 8 D 1 2 D S 2 9 C 25 2A 7 D 3 6 R A 2 9 C5 1A 7 D 2 2 R A 2 9 C M 2 3 1 4 3A 8 D 1 2 D S 2 9 B 35 14 - 1 4 3 7 2 6 8 - 3A 7 D 3 6 R A 2 9 A M 2 3 25 2A 7 D 2 2 R A 2 9 C 4 3A 8 D 1 2 D S 2 9 B 25 1A 7 D 3 6 R A 2 9 A M 2 3 15 1A 7 D 2 2 R A 2 9 A M 2 3 2 4 3A 8 D 1 2 D S 2 9 A 35 2A 7 D 3 6 R A 2 9 A5 1A 7 D 2 2 R A 2 9 A M 2 3 1 4 32 - 1 4 3 7 2 6 9 - 7A 8 D 1 2 D S 2 9 A 24 94 - 1 4 3 7 2 6 8 - 2A 7 D 3 6 D S 2 9 C 25 2A 7 D 2 2 R A 2 9 A 4 4A 8 D 1 0 W W 2 9 B 34 9A 7 D 3 6 D S 2 9 B 24 91 - 1 4 3 7 2 6 8 - 9A 7 D 2 2 D S 2 9 C 2 4 42 - 1 4 3 7 2 6 9 - 5A 8 D 1 0 W W 2 9 A 34 94 - 1 4 3 7 2 6 8 - 1A 7 D 3 6 D S 2 9 A 24 9A 7 D 2 2 D S 2 9 B 2 4 7A 8 D 1 0 R A 2 9 F M 2 3 34 9A 7 D 3 5 W W 2 9 B 34 9A 7 D 2 2 D S 2 9 A 2 4 6A 8 D 1 0 R A 2 9 F4 9A 7 D 3 5 W W 2 9 A 34 9A 7 D 1 8 W W 2 9 B 3 Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired T y c o Acquired T y c o Acquired T y c o P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r —— ——— — — —— — ——— — —— — — — —— ——— —— —— —— —— —— ——— ——— ——— — —— ——— —— —— ——— —— ——— ——— — —— — —— —— —— — —— — ——— —— ——— ——— ——— — —— —— —— —— —— —— —— —— —— —— —— —— ——— — —— —— ——— —— ——— —— —— — ——— — ——— — ——— — ——— — —— —— ——— —— —— — ——— ——— ——— —— ——— — 195 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 3 1C 1 D 3 6 P F 2 9 0 4 34 45 - 1 4 3 7 2 7 0 - 6A 8 D 6 0 W W 2 9 A 34 31 - 1 4 3 7 2 7 0 - 6A 8 D 3 6 D S 2 9 A 2 1 3 2C 1 D 3 6 P F 2 9 0 1 74 7A 8 D 6 0 R A 2 9 E M 2 3 34 4A 8 D 3 5 W W 2 9 B 3 1 3 1C 1 D 3 6 P F 2 9 0 1 54 6A 8 D 6 0 R A 2 9 E4 41 - 1 4 3 7 2 7 0 - 5A 8 D 3 5 W W 2 9 A 3 1 3 1C 1 D 3 6 P F 2 9 0 1 34 7A 8 D 6 0 R A 2 9 C M 2 3 34 7A 8 D 3 5 R A 2 9 E M 2 3 3 1 3 2C 1 D 3 5 P F 2 9 1 3 74 6A 8 D 6 0 R A 2 9 C4 6A 8 D 3 5 R A 2 9 E 1 3 1C 1 D 3 5 P F 2 9 1 3 54 7A 8 D 6 0 R A 2 9 A M 2 3 34 7A 8 D 3 5 R A 2 9 C M 2 3 3 1 3 1C 1 D 3 5 P F 2 9 1 3 34 65 - 1 4 3 7 2 7 0 - 5A 8 D 6 0 R A 2 9 A4 61 - 1 4 3 7 2 7 0 - 4A 8 D 3 5 R A 2 9 C 1 3 2C 1 D 3 5 P F 2 9 0 4 74 45 - 1 4 3 7 2 7 0 - 3A 8 D 6 0 D S 2 9 C 34 7A 8 D 3 5 R A 2 9 A M 2 3 3 1 3 1C 1 D 3 5 P F 2 9 0 4 54 35 - 1 4 3 7 2 7 0 - 2A 8 D 6 0 D S 2 9 C 24 6A 8 D 3 5 R A 2 9 A 1 3 1C 1 D 3 5 P F 2 9 0 4 34 4A 8 D 6 0 D S 2 9 B 34 3A 8 D 3 5 D S 2 9 C 3 1 3 2C 1 D 3 5 P F 2 9 0 1 74 3A 8 D 6 0 D S 2 9 B 24 31 - 1 4 3 7 2 7 0 - 3A 8 D 3 5 D S 2 9 C 2 1 3 11 - 1 4 3 7 2 6 4 - 6C 1 D 3 5 P F 2 9 0 1 54 4A 8 D 6 0 D S 2 9 A 34 3A 8 D 3 5 D S 2 9 B 3 1 3 11 - 1 4 3 7 2 6 4 - 5C 1 D 3 5 P F 2 9 0 1 34 35 - 1 4 3 7 2 7 0 - 1A 8 D 6 0 D S 2 9 A 24 3A 8 D 3 5 D S 2 9 B 2 1 3 2C 1 D 3 0 P F 2 9 1 3 74 4A 8 D 5 0 W W 2 9 B 34 3A 8 D 3 5 D S 2 9 A 3 1 3 1C 1 D 3 0 P F 2 9 1 3 54 44 - 1 4 3 7 2 7 0 - 7A 8 D 5 0 W W 2 9 A 34 31 - 1 4 3 7 2 7 0 - 2A 8 D 3 5 D S 2 9 A 2 1 3 1C 1 D 3 0 P F 2 9 1 3 34 7A 8 D 5 0 R A 2 9 F M 2 3 34 4A 8 D 3 1 W W 2 9 B 3 1 3 2C 1 D 3 0 P F 2 9 0 4 74 64 - 1 4 3 7 2 7 0 - 6A 8 D 5 0 R A 2 9 F4 41 - 1 4 3 7 2 7 0 - 0A 8 D 3 1 W W 2 9 A 3 1 3 1C 1 D 3 0 P F 2 9 0 4 54 7A 8 D 5 0 R A 2 9 E M 2 3 34 7A 8 D 3 1 R A 2 9 F M 2 3 3 1 3 1C 1 D 3 0 P F 2 9 0 4 34 64 - 1 4 3 7 2 7 0 - 5A 8 D 5 0 R A 2 9 E4 60 - 1 4 3 7 2 7 0 - 9A 8 D 3 1 R A 2 9 F 1 3 2C 1 D 3 0 P F 2 9 0 1 74 7A 8 D 5 0 R A 2 9 C M 2 3 34 7A 8 D 3 1 R A 2 9 E M 2 3 3 1 3 1C 1 D 3 0 P F 2 9 0 1 54 64 - 1 4 3 7 2 7 0 - 4A 8 D 5 0 R A 2 9 C4 60 - 1 4 3 7 2 7 0 - 8A 8 D 3 1 R A 2 9 E 1 3 1C 1 D 3 0 P F 2 9 0 1 34 7A 8 D 5 0 R A 2 9 A M 2 3 34 70 - 1 4 3 7 2 7 0 - 7A 8 D 3 1 R A 2 9 C M 2 3 3 1 3 2C 1 D 2 8 P F 2 9 1 3 74 6A 8 D 5 0 R A 2 9 A4 60 - 1 4 3 7 2 7 0 - 6A 8 D 3 1 R A 2 9 C 1 3 1C 1 D 2 8 P F 2 9 1 3 54 4A 8 D 5 0 D S 2 9 E 34 7A 8 D 3 1 R A 2 9 A M 2 3 3 1 3 1C 1 D 2 8 P F 2 9 1 3 34 3A 8 D 5 0 D S 2 9 E 24 60 - 1 4 3 7 2 7 0 - 4A 8 D 3 1 R A 2 9 A 1 3 2C 1 D 2 8 P F 2 9 0 4 74 4A 8 D 5 0 D S 2 9 D 34 3A 8 D 3 1 D S 2 9 E 3 1 3 1C 1 D 2 8 P F 2 9 0 4 54 34 - 1 4 3 7 2 7 0 - 2A 8 D 5 0 D S 2 9 D 24 3A 8 D 3 1 D S 2 9 E 2 1 3 1C 1 D 2 8 P F 2 9 0 4 34 44 - 1 4 3 7 2 7 0 - 1A 8 D 5 0 D S 2 9 C 34 3A 8 D 3 1 D S 2 9 D 3 1 3 2C 1 D 2 8 P F 2 9 0 1 74 34 - 1 4 3 7 2 7 0 - 0A 8 D 5 0 D S 2 9 C 24 30 - 1 4 3 7 2 7 0 - 3A 8 D 3 1 D S 2 9 D 2 1 3 1C 1 D 2 8 P F 2 9 0 1 54 4A 8 D 5 0 D S 2 9 B 34 3A 8 D 3 1 D S 2 9 C 3 1 3 1C 1 D 2 8 P F 2 9 0 1 34 3A 8 D 5 0 D S 2 9 B 24 30 - 1 4 3 7 2 7 0 - 2A 8 D 3 1 D S 2 9 C 2 1 3 2C 1 D 2 5 P F 2 9 1 3 74 4A 8 D 5 0 D S 2 9 A 34 30 - 1 4 3 7 2 7 0 - 1A 8 D 3 1 D S 2 9 B 3 1 3 1C 1 D 2 5 P F 2 9 1 3 54 33 - 1 4 3 7 2 7 0 - 9A 8 D 5 0 D S 2 9 A 24 3A 8 D 3 1 D S 2 9 B 2 1 3 1C 1 D 2 5 P F 2 9 1 3 34 4A 8 D 4 4 W W 2 9 B 34 39 - 1 4 3 7 2 6 9 - 9A 8 D 3 1 D S 2 9 A 3 1 3 2C 1 D 2 5 P F 2 9 0 4 74 4A 8 D 4 4 W W 2 9 A 34 39 - 1 4 3 7 2 6 9 - 8A 8 D 3 1 D S 2 9 A 2 1 3 1C 1 D 2 5 P F 2 9 0 4 54 7A 8 D 4 4 R A 2 9 E M 2 3 34 49 - 1 4 3 7 2 6 9 - 5A 8 D 3 0 W W 2 9 B 3 1 3 1C 1 D 2 5 P F 2 9 0 4 34 6A 8 D 4 4 R A 2 9 E4 49 - 1 4 3 7 2 6 9 - 4A 8 D 3 0 W W 2 9 A 3 1 3 2C 1 D 2 5 P F 2 9 0 1 74 73 - 1 4 3 7 2 7 0 - 8A 8 D 4 4 R A 2 9 C M 2 3 34 7A 8 D 3 0 R A 2 9 F M 2 3 3 1 3 11 - 1 4 3 7 2 6 4 - 0C 1 D 2 5 P F 2 9 0 1 54 6A 8 D 4 4 R A 2 9 C4 6A 8 D 3 0 R A 2 9 F 1 3 10 - 1 4 3 7 2 6 4 - 9C 1 D 2 5 P F 2 9 0 1 34 7A 8 D 4 4 R A 2 9 A M 2 3 34 7A 8 D 3 0 R A 2 9 E M 2 3 3 1 3 2C 1 D 2 2 P F 2 9 1 3 74 6A 8 D 4 4 R A 2 9 A4 69 - 1 4 3 7 2 6 9 - 3A 8 D 3 0 R A 2 9 E 1 3 1C 1 D 2 2 P F 2 9 1 3 54 43 - 1 4 3 7 2 7 0 - 7A 8 D 4 4 D S 2 9 C 34 7A 8 D 3 0 R A 2 9 C M 2 3 3 1 3 1C 1 D 2 2 P F 2 9 1 3 34 33 - 1 4 3 7 2 7 0 - 6A 8 D 4 4 D S 2 9 C 24 69 - 1 4 3 7 2 6 9 - 2A 8 D 3 0 R A 2 9 C 1 3 2C 1 D 2 2 P F 2 9 0 4 74 4A 8 D 4 4 D S 2 9 B 34 7A 8 D 3 0 R A 2 9 A M 2 3 3 1 3 1C 1 D 2 2 P F 2 9 0 4 54 3A 8 D 4 4 D S 2 9 B 24 6A 8 D 3 0 R A 2 9 A 1 3 1C 1 D 2 2 P F 2 9 0 4 34 4A 8 D 4 4 D S 2 9 A 34 3A 8 D 3 0 D S 2 9 E 3 1 3 2C 1 D 2 2 P F 2 9 0 1 74 33 - 1 4 3 7 2 7 0 - 5A 8 D 4 4 D S 2 9 A 24 3A 8 D 3 0 D S 2 9 E 2 1 3 1C 1 D 2 2 P F 2 9 0 1 54 4A 8 D 4 3 W W 2 9 B 34 3A 8 D 3 0 D S 2 9 D 3 1 3 1C 1 D 2 2 P F 2 9 0 1 34 43 - 1 4 3 7 2 7 0 - 4A 8 D 4 3 W W 2 9 A 34 39 - 1 4 3 7 2 6 9 - 1A 8 D 3 0 D S 2 9 D 2 1 3 2C 1 D 2 0 P F 2 9 1 3 74 7A 8 D 4 3 R A 2 9 E M 2 3 34 39 - 1 4 3 7 2 6 9 - 0A 8 D 3 0 D S 2 9 D 2 1 3 1C 1 D 2 0 P F 2 9 1 3 54 63 - 1 4 3 7 2 7 0 - 3A 8 D 4 3 R A 2 9 E4 38 - 1 4 3 7 2 6 9 - 9A 8 D 3 0 D S 2 9 C 3 1 3 1C 1 D 2 0 P F 2 9 1 3 34 7A 8 D 4 3 R A 2 9 C M 2 3 34 38 - 1 4 3 7 2 6 9 - 7A 8 D 3 0 D S 2 9 C 2 1 3 2C 1 D 2 0 P F 2 9 0 4 74 63 - 1 4 3 7 2 7 0 - 2A 8 D 4 3 R A 2 9 C4 3A 8 D 3 0 D S 2 9 B 3 1 3 1C 1 D 2 0 P F 2 9 0 4 54 7A 8 D 4 3 R A 2 9 A M 2 3 34 38 - 1 4 3 7 2 6 9 - 6A 8 D 3 0 D S 2 9 B 2 1 3 10 - 1 4 3 7 2 6 4 - 7C 1 D 2 0 P F 2 9 0 4 34 63 - 1 4 3 7 2 7 0 - 1A 8 D 4 3 R A 2 9 A4 3A 8 D 3 0 D S 2 9 A 3 1 3 2C 1 D 2 0 P F 2 9 0 1 74 3A 8 D 4 3 D S 2 9 C 34 38 - 1 4 3 7 2 6 9 - 5A 8 D 3 0 D S 2 9 A 2 1 3 10 - 1 4 3 7 2 6 4 - 6C 1 D 2 0 P F 2 9 0 1 54 33 - 1 4 3 7 2 7 0 - 0A 8 D 4 3 D S 2 9 C 24 4A 8 D 2 8 W W 2 9 B 3 1 3 1C 1 D 2 0 P F 2 9 0 1 34 3A 8 D 4 3 D S 2 9 B 34 4A 8 D 2 8 W W 2 9 A 3 1 3 2C 1 D 1 8 P F 2 9 1 3 74 3A 8 D 4 3 D S 2 9 B 24 7A 8 D 2 8 R A 2 9 E M 2 3 3 1 3 1C 1 D 1 8 P F 2 9 1 3 54 3A 8 D 4 3 D S 2 9 A 34 68 - 1 4 3 7 2 6 9 - 3A 8 D 2 8 R A 2 9 E 1 3 1C 1 D 1 8 P F 2 9 1 3 34 3A 8 D 4 3 D S 2 9 A 24 7A 8 D 2 8 R A 2 9 C M 2 3 3 1 3 2C 1 D 1 8 P F 2 9 0 4 74 4A 8 D 4 0 W W 2 9 B 34 66 - 1 4 3 7 2 7 0 - 6A 8 D 2 8 R A 2 9 C 1 3 1C 1 D 1 8 P F 2 9 0 4 54 42 - 1 4 3 7 2 7 0 - 9A 8 D 4 0 W W 2 9 A 34 7A 8 D 2 8 R A 2 9 A M 2 3 3 1 3 1C 1 D 1 8 P F 2 9 0 4 34 7A 8 D 4 0 R A 2 9 E M 2 3 34 6A 8 D 2 8 R A 2 9 A 1 3 2C 1 D 1 8 P F 2 9 0 1 74 62 - 1 4 3 7 2 7 0 - 8A 8 D 4 0 R A 2 9 E4 3A 8 D 2 8 D S 2 9 C 3 1 3 10 - 1 4 3 7 2 6 4 - 3C 1 D 1 8 P F 2 9 0 1 54 7A 8 D 4 0 R A 2 9 C M 2 3 34 38 - 1 4 3 7 2 6 9 - 2A 8 D 2 8 D S 2 9 C 2 1 3 1C 1 D 1 8 P F 2 9 0 1 34 6A 8 D 4 0 R A 2 9 C4 3A 8 D 2 8 D S 2 9 B 3 4 4A 8 D 6 5 W W 2 9 B 34 7A 8 D 4 0 R A 2 9 A M 2 3 34 3A 8 D 2 8 D S 2 9 B 2 4 4A 8 D 6 5 W W 2 9 A 34 6A 8 D 4 0 R A 2 9 A4 3A 8 D 2 8 D S 2 9 A 3 4 7A 8 D 6 5 R A 2 9 F M 2 3 34 3A 8 D 4 0 D S 2 9 C 34 38 - 1 4 3 7 2 6 9 - 1A 8 D 2 8 D S 2 9 A 2 4 6A 8 D 6 5 R A 2 9 F4 32 - 1 4 3 7 2 7 0 - 7A 8 D 4 0 D S 2 9 C 24 4A 8 D 2 5 W W 2 9 B 3 4 7A 8 D 6 5 R A 2 9 E M 2 3 34 3A 8 D 4 0 D S 2 9 B 34 47 - 1 4 3 7 2 6 9 - 9A 8 D 2 5 W W 2 9 A 3 4 6A 8 D 6 5 R A 2 9 E4 3A 8 D 4 0 D S 2 9 B 24 77 - 1 4 3 7 2 6 9 - 8A 8 D 2 5 R A 2 9 F M 2 3 3 4 7A 8 D 6 5 R A 2 9 C M 2 3 34 32 - 1 4 3 7 2 7 0 - 6A 8 D 4 0 D S 2 9 A 34 6A 8 D 2 5 R A 2 9 F 4 6A 8 D 6 5 R A 2 9 C4 3A 8 D 4 0 D S 2 9 A 24 7A 8 D 2 5 R A 2 9 E M 2 3 3 4 7A 8 D 6 5 R A 2 9 A M 2 3 34 4A 8 D 3 6 W W 2 9 B 34 67 - 1 4 3 7 2 6 9 - 7A 8 D 2 5 R A 2 9 E 4 6A 8 D 6 5 R A 2 9 A4 42 - 1 4 3 7 2 7 0 - 4A 8 D 3 6 W W 2 9 A 34 77 - 1 4 3 7 2 6 9 - 6A 8 D 2 5 R A 2 9 C M 2 3 3 4 4A 8 D 6 5 D S 2 9 E 34 72 - 1 4 3 7 2 7 0 - 3A 8 D 3 6 R A 2 9 E M 2 3 34 67 - 1 4 3 7 2 6 9 - 5A 8 D 2 5 R A 2 9 C 4 3A 8 D 6 5 D S 2 9 E 24 62 - 1 4 3 7 2 7 0 - 2A 8 D 3 6 R A 2 9 E4 77 - 1 4 3 7 2 6 9 - 4A 8 D 2 5 R A 2 9 A M 2 3 3 4 4A 8 D 6 5 D S 2 9 D 34 7A 8 D 3 6 R A 2 9 C M 2 3 34 67 - 1 4 3 7 2 6 9 - 3A 8 D 2 5 R A 2 9 A 4 36 - 1 4 3 7 2 7 0 - 0A 8 D 6 5 D S 2 9 D 24 62 - 1 4 3 7 2 7 0 - 1A 8 D 3 6 R A 2 9 C4 3A 8 D 2 5 D S 2 9 E 3 4 4A 8 D 6 5 D S 2 9 C 34 7A 8 D 3 6 R A 2 9 A M 2 3 34 3A 8 D 2 5 D S 2 9 E 2 4 35 - 1 4 3 7 2 7 0 - 9A 8 D 6 5 D S 2 9 C 24 62 - 1 4 3 7 2 7 0 - 0A 8 D 3 6 R A 2 9 A4 3A 8 D 2 5 D S 2 9 D 3 4 4A 8 D 6 5 D S 2 9 B 34 31 - 1 4 3 7 2 7 0 - 9A 8 D 3 6 D S 2 9 C 34 3A 8 D 2 5 D S 2 9 D 2 4 3A 8 D 6 5 D S 2 9 B 24 31 - 1 4 3 7 2 7 0 - 8A 8 D 3 6 D S 2 9 C 24 37 - 1 4 3 7 2 6 9 - 2A 8 D 2 5 D S 2 9 C 3 4 4A 8 D 6 5 D S 2 9 A 34 31 - 1 4 3 7 2 7 0 - 7A 8 D 3 6 D S 2 9 B 34 37 - 1 4 3 7 2 6 9 - 1A 8 D 2 5 D S 2 9 C 2 4 3A 8 D 6 5 D S 2 9 A 24 3A 8 D 3 6 D S 2 9 B 24 3A 8 D 2 5 D S 2 9 B 3 4 4A 8 D 6 0 W W 2 9 B 34 3A 8 D 3 6 D S 2 9 A 34 37 - 1 4 3 7 2 6 9 - 0A 8 D 2 5 D S 2 9 B 2 Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired T y c o Acquired T y c o Acquired T y c o P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r —— ——— ——— ——— ——— ——— —— ——— ——— ——— ——— —— ——— ——— ——— ——— ——— ——— —— ——— ——— ——— —— —— ——— ——— ——— ——— ——— ——— ——— ——— —— —— —— ——— —— —— ——— ——— ——— —— —— —— ——— —— —— —— ——— —— — ——— — —— —— ——— —— —— —— —— — — ——— ——— —— ——— —— ——— ——— ——— — —— — ——— ——— ——— —— —— ——— ——— ——— —— ——— —— ——— —— —— ——— 196 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 8C 6 D 2 5 P F 2 9 1 3 31 4 6C 6 D 1 8 P F 2 9 0 2 23 9C 6 D 1 0 D S 2 9 D 3 1 4 8C 6 D 2 5 P F 2 9 1 3 21 4 81 - 1 4 3 7 2 6 2 - 3C 6 D 1 8 P F 2 9 0 1 33 9C 6 D 1 0 D S 2 9 D 1 1 4 8C 6 D 2 5 P F 2 9 0 4 31 4 8C 6 D 1 8 P F 2 9 0 1 24 02 - 1 4 3 7 2 7 3 - 2C 6 D 1 0 D S 2 9 C 4 1 4 8C 6 D 2 5 P F 2 9 0 4 24 0C 6 D 1 8 D S 2 9 E 43 9C 6 D 1 0 D S 2 9 C 3 1 4 6C 6 D 2 5 P F 2 9 0 3 33 9C 6 D 1 8 D S 2 9 E 33 92 - 1 4 3 7 2 7 3 - 1C 6 D 1 0 D S 2 9 C 1 1 4 6C 6 D 2 5 P F 2 9 0 3 23 9C 6 D 1 8 D S 2 9 E 14 0C 6 D 1 0 D S 2 9 B 4 1 4 6C 6 D 2 5 P F 2 9 0 2 34 0C 6 D 1 8 D S 2 9 D 43 92 - 1 4 3 7 2 7 3 - 0C 6 D 1 0 D S 2 9 B 3 1 4 6C 6 D 2 5 P F 2 9 0 2 23 9C 6 D 1 8 D S 2 9 D 33 9C 6 D 1 0 D S 2 9 B 1 1 4 8C 6 D 2 5 P F 2 9 0 1 33 9C 6 D 1 8 D S 2 9 D 14 0C 6 D 1 0 D S 2 9 A 4 1 4 8C 6 D 2 5 P F 2 9 0 1 24 0C 6 D 1 8 D S 2 9 C 43 9C 6 D 1 0 D S 2 9 A 3 4 0C 6 D 2 5 D S 2 9 E 43 9C 6 D 1 8 D S 2 9 C 33 91 - 1 4 3 7 2 7 3 - 9C 6 D 1 0 D S 2 9 A 1 3 9C 6 D 2 5 D S 2 9 E 33 93 - 1 4 3 7 2 7 3 - 4C 6 D 1 8 D S 2 9 C 11 4 6C 6 D 0 6 P F 2 9 1 4 3 3 9C 6 D 2 5 D S 2 9 E 14 0C 6 D 1 8 D S 2 9 B 41 4 6C 6 D 0 6 P F 2 9 1 4 2 4 0C 6 D 2 5 D S 2 9 D 43 9C 6 D 1 8 D S 2 9 B 31 4 8C 6 D 0 6 P F 2 9 1 3 3 3 9C 6 D 2 5 D S 2 9 D 33 9C 6 D 1 8 D S 2 9 B 11 4 8C 6 D 0 6 P F 2 9 1 3 2 3 94 - 1 4 3 7 2 7 3 - 3C 6 D 2 5 D S 2 9 D 14 0C 6 D 1 8 D S 2 9 A 41 4 80 - 1 4 3 7 2 6 2 - 5C 6 D 0 6 P F 2 9 0 4 3 4 0C 6 D 2 5 D S 2 9 C 43 93 - 1 4 3 7 2 7 3 - 3C 6 D 1 8 D S 2 9 A 31 4 8C 6 D 0 6 P F 2 9 0 4 2 3 94 - 1 4 3 7 2 7 3 - 2C 6 D 2 5 D S 2 9 C 33 93 - 1 4 3 7 2 7 3 - 2C 6 D 1 8 D S 2 9 A 11 4 6C 6 D 0 6 P F 2 9 0 3 3 3 9C 6 D 2 5 D S 2 9 C 11 4 6C 6 D 1 5 P F 2 9 1 4 31 4 6C 6 D 0 6 P F 2 9 0 3 2 4 0C 6 D 2 5 D S 2 9 B 41 4 6C 6 D 1 5 P F 2 9 1 4 21 4 6C 6 D 0 6 P F 2 9 0 2 3 3 9C 6 D 2 5 D S 2 9 B 31 4 8C 6 D 1 5 P F 2 9 1 3 31 4 6C 6 D 0 6 P F 2 9 0 2 2 3 9C 6 D 2 5 D S 2 9 B 11 4 8C 6 D 1 5 P F 2 9 1 3 21 4 80 - 1 4 3 7 2 6 2 - 4C 6 D 0 6 P F 2 9 0 1 3 4 0C 6 D 2 5 D S 2 9 A 41 4 8C 6 D 1 5 P F 2 9 0 4 31 4 8C 6 D 0 6 P F 2 9 0 1 2 3 94 - 1 4 3 7 2 7 3 - 1C 6 D 2 5 D S 2 9 A 31 4 8C 6 D 1 5 P F 2 9 0 4 24 0C 6 D 0 6 D S 2 9 E 4 3 9C 6 D 2 5 D S 2 9 A 11 4 6C 6 D 1 5 P F 2 9 0 3 33 9C 6 D 0 6 D S 2 9 E 3 1 4 6C 6 D 2 2 P F 2 9 1 4 31 4 6C 6 D 1 5 P F 2 9 0 3 23 9C 6 D 0 6 D S 2 9 E 1 1 4 6C 6 D 2 2 P F 2 9 1 4 21 4 61 - 1 4 3 7 2 6 2 - 0C 6 D 1 5 P F 2 9 0 2 34 01 - 1 4 3 7 2 7 3 - 8C 6 D 0 6 D S 2 9 D 4 1 4 8C 6 D 2 2 P F 2 9 1 3 31 4 60 - 1 4 3 7 2 6 2 - 9C 6 D 1 5 P F 2 9 0 2 23 91 - 1 4 3 7 2 7 3 - 7C 6 D 0 6 D S 2 9 D 3 1 4 8C 6 D 2 2 P F 2 9 1 3 21 4 8C 6 D 1 5 P F 2 9 0 1 33 91 - 1 4 3 7 2 7 3 - 6C 6 D 0 6 D S 2 9 D 1 1 4 82 - 1 4 3 7 2 6 2 - 0C 6 D 2 2 P F 2 9 0 4 31 4 8C 6 D 1 5 P F 2 9 0 1 24 0C 6 D 0 6 D S 2 9 C 4 1 4 8C 6 D 2 2 P F 2 9 0 4 24 0C 6 D 1 5 D S 2 9 E 43 91 - 1 4 3 7 2 7 3 - 5C 6 D 0 6 D S 2 9 C 3 1 4 6C 6 D 2 2 P F 2 9 0 3 33 9C 6 D 1 5 D S 2 9 E 33 91 - 1 4 3 7 2 7 3 - 4C 6 D 0 6 D S 2 9 C 1 1 4 6C 6 D 2 2 P F 2 9 0 3 23 9C 6 D 1 5 D S 2 9 E 14 0C 6 D 0 6 D S 2 9 B 4 1 4 61 - 1 4 3 7 2 6 2 - 9C 6 D 2 2 P F 2 9 0 2 34 0C 6 D 1 5 D S 2 9 D 43 9C 6 D 0 6 D S 2 9 B 3 1 4 6C 6 D 2 2 P F 2 9 0 2 23 93 - 1 4 3 7 2 7 3 - 1C 6 D 1 5 D S 2 9 D 33 9C 6 D 0 6 D S 2 9 B 1 1 4 81 - 1 4 3 7 2 6 2 - 8C 6 D 2 2 P F 2 9 0 1 33 93 - 1 4 3 7 2 7 3 - 0C 6 D 1 5 D S 2 9 D 14 0C 6 D 0 6 D S 2 9 A 4 1 4 8C 6 D 2 2 P F 2 9 0 1 24 0C 6 D 1 5 D S 2 9 C 43 9C 6 D 0 6 D S 2 9 A 3 4 0C 6 D 2 2 D S 2 9 E 43 92 - 1 4 3 7 2 7 3 - 9C 6 D 1 5 D S 2 9 C 33 91 - 1 4 3 7 2 7 3 - 3C 6 D 0 6 D S 2 9 A 1 3 9C 6 D 2 2 D S 2 9 E 33 92 - 1 4 3 7 2 7 3 - 8C 6 D 1 5 D S 2 9 C 11 3 2C 1 D 6 0 P F 2 9 1 3 7 3 9C 6 D 2 2 D S 2 9 E 14 0C 6 D 1 5 D S 2 9 B 41 3 1C 1 D 6 0 P F 2 9 1 3 5 4 0C 6 D 2 2 D S 2 9 D 43 92 - 1 4 3 7 2 7 3 - 7C 6 D 1 5 D S 2 9 B 31 3 1C 1 D 6 0 P F 2 9 1 3 3 3 94 - 1 4 3 7 2 7 3 - 0C 6 D 2 2 D S 2 9 D 33 9C 6 D 1 5 D S 2 9 B 11 3 2C 1 D 6 0 P F 2 9 0 4 7 3 93 - 1 4 3 7 2 7 3 - 9C 6 D 2 2 D S 2 9 D 14 0C 6 D 1 5 D S 2 9 A 41 3 1C 1 D 6 0 P F 2 9 0 4 5 4 0C 6 D 2 2 D S 2 9 C 43 9C 6 D 1 5 D S 2 9 A 31 3 1C 1 D 6 0 P F 2 9 0 4 3 3 9C 6 D 2 2 D S 2 9 C 33 92 - 1 4 3 7 2 7 3 - 6C 6 D 1 5 D S 2 9 A 11 3 2C 1 D 6 0 P F 2 9 0 1 7 3 93 - 1 4 3 7 2 7 3 - 8C 6 D 2 2 D S 2 9 C 11 4 6C 6 D 1 2 P F 2 9 1 4 31 3 1C 1 D 6 0 P F 2 9 0 1 5 4 03 - 1 4 3 7 2 7 3 - 7C 6 D 2 2 D S 2 9 B 41 4 6C 6 D 1 2 P F 2 9 1 4 21 3 1C 1 D 6 0 P F 2 9 0 1 3 3 9C 6 D 2 2 D S 2 9 B 31 4 8C 6 D 1 2 P F 2 9 1 3 31 3 2C 1 D 5 0 P F 2 9 1 3 7 3 9C 6 D 2 2 D S 2 9 B 11 4 8C 6 D 1 2 P F 2 9 1 3 21 3 1C 1 D 5 0 P F 2 9 1 3 5 4 0C 6 D 2 2 D S 2 9 A 41 4 8C 6 D 1 2 P F 2 9 0 4 31 3 1C 1 D 5 0 P F 2 9 1 3 3 3 93 - 1 4 3 7 2 7 3 - 6C 6 D 2 2 D S 2 9 A 31 4 8C 6 D 1 2 P F 2 9 0 4 21 3 2C 1 D 5 0 P F 2 9 0 4 7 3 93 - 1 4 3 7 2 7 3 - 5C 6 D 2 2 D S 2 9 A 11 4 6C 6 D 1 2 P F 2 9 0 3 31 3 1C 1 D 5 0 P F 2 9 0 4 5 1 4 6C 6 D 2 0 P F 2 9 1 4 31 4 6C 6 D 1 2 P F 2 9 0 3 21 3 1C 1 D 5 0 P F 2 9 0 4 3 1 4 6C 6 D 2 0 P F 2 9 1 4 21 4 6C 6 D 1 2 P F 2 9 0 2 31 3 22 - 1 4 3 7 2 6 4 - 4C 1 D 5 0 P F 2 9 0 1 7 1 4 8C 6 D 2 0 P F 2 9 1 3 31 4 6C 6 D 1 2 P F 2 9 0 2 21 3 12 - 1 4 3 7 2 6 4 - 3C 1 D 5 0 P F 2 9 0 1 5 1 4 8C 6 D 2 0 P F 2 9 1 3 21 4 8C 6 D 1 2 P F 2 9 0 1 31 3 12 - 1 4 3 7 2 6 4 - 2C 1 D 5 0 P F 2 9 0 1 3 1 4 8C 6 D 2 0 P F 2 9 0 4 31 4 8C 6 D 1 2 P F 2 9 0 1 21 3 2C 1 D 4 5 P F 2 9 1 3 7 1 4 8C 6 D 2 0 P F 2 9 0 4 24 0C 6 D 1 2 D S 2 9 E 41 3 1C 1 D 4 5 P F 2 9 1 3 5 1 4 6C 6 D 2 0 P F 2 9 0 3 33 9C 6 D 1 2 D S 2 9 E 31 3 1C 1 D 4 5 P F 2 9 1 3 3 1 4 6C 6 D 2 0 P F 2 9 0 3 23 9C 6 D 1 2 D S 2 9 E 11 3 2C 1 D 4 5 P F 2 9 0 4 7 1 4 6C 6 D 2 0 P F 2 9 0 2 34 0C 6 D 1 2 D S 2 9 D 41 3 1C 1 D 4 5 P F 2 9 0 4 5 1 4 6C 6 D 2 0 P F 2 9 0 2 23 9C 6 D 1 2 D S 2 9 D 31 3 1C 1 D 4 5 P F 2 9 0 4 3 1 4 8C 6 D 2 0 P F 2 9 0 1 33 9C 6 D 1 2 D S 2 9 D 11 3 2C 1 D 4 5 P F 2 9 0 1 7 1 4 8C 6 D 2 0 P F 2 9 0 1 24 0C 6 D 1 2 D S 2 9 C 41 3 1C 1 D 4 5 P F 2 9 0 1 5 4 0C 6 D 2 0 D S 2 9 E 43 92 - 1 4 3 7 2 7 3 - 5C 6 D 1 2 D S 2 9 C 31 3 1C 1 D 4 5 P F 2 9 0 1 3 3 9C 6 D 2 0 D S 2 9 E 33 92 - 1 4 3 7 2 7 3 - 4C 6 D 1 2 D S 2 9 C 11 3 2C 1 D 4 3 P F 2 9 1 3 7 3 9C 6 D 2 0 D S 2 9 E 14 0C 6 D 1 2 D S 2 9 B 41 3 1C 1 D 4 3 P F 2 9 1 3 5 4 0C 6 D 2 0 D S 2 9 D 43 9C 6 D 1 2 D S 2 9 B 31 3 1C 1 D 4 3 P F 2 9 1 3 3 3 9C 6 D 2 0 D S 2 9 D 33 9C 6 D 1 2 D S 2 9 B 11 3 2C 1 D 4 3 P F 2 9 0 4 7 3 9C 6 D 2 0 D S 2 9 D 14 02 - 1 4 3 7 2 7 3 - 3C 6 D 1 2 D S 2 9 A 41 3 1C 1 D 4 3 P F 2 9 0 4 5 4 0C 6 D 2 0 D S 2 9 C 43 9C 6 D 1 2 D S 2 9 A 31 3 1C 1 D 4 3 P F 2 9 0 4 3 3 9C 6 D 2 0 D S 2 9 C 33 9C 6 D 1 2 D S 2 9 A 11 3 2C 1 D 4 3 P F 2 9 0 1 7 3 9C 6 D 2 0 D S 2 9 C 11 4 6C 6 D 1 0 P F 2 9 1 4 31 3 1C 1 D 4 3 P F 2 9 0 1 5 4 0C 6 D 2 0 D S 2 9 B 41 4 6C 6 D 1 0 P F 2 9 1 4 21 3 1C 1 D 4 3 P F 2 9 0 1 3 3 9C 6 D 2 0 D S 2 9 B 31 4 8C 6 D 1 0 P F 2 9 1 3 31 3 2C 1 D 4 0 P F 2 9 1 3 7 3 9C 6 D 2 0 D S 2 9 B 11 4 8C 6 D 1 0 P F 2 9 1 3 21 3 1C 1 D 4 0 P F 2 9 1 3 5 4 0C 6 D 2 0 D S 2 9 A 41 4 80 - 1 4 3 7 2 6 2 - 7C 6 D 1 0 P F 2 9 0 4 31 3 1C 1 D 4 0 P F 2 9 1 3 3 3 9C 6 D 2 0 D S 2 9 A 31 4 8C 6 D 1 0 P F 2 9 0 4 21 3 2C 1 D 4 0 P F 2 9 0 4 7 3 9C 6 D 2 0 D S 2 9 A 11 4 6C 6 D 1 0 P F 2 9 0 3 31 3 1C 1 D 4 0 P F 2 9 0 4 5 1 4 6C 6 D 1 8 P F 2 9 1 4 31 4 6C 6 D 1 0 P F 2 9 0 3 21 3 1C 1 D 4 0 P F 2 9 0 4 3 1 4 6C 6 D 1 8 P F 2 9 1 4 21 4 6C 6 D 1 0 P F 2 9 0 2 31 3 2C 1 D 4 0 P F 2 9 0 1 7 1 4 8C 6 D 1 8 P F 2 9 1 3 31 4 60 - 1 4 3 7 2 6 2 - 6C 6 D 1 0 P F 2 9 0 2 21 3 1C 1 D 4 0 P F 2 9 0 1 5 1 4 8C 6 D 1 8 P F 2 9 1 3 21 4 8C 6 D 1 0 P F 2 9 0 1 31 3 1C 1 D 4 0 P F 2 9 0 1 3 1 4 8C 6 D 1 8 P F 2 9 0 4 31 4 8C 6 D 1 0 P F 2 9 0 1 21 3 2C 1 D 3 6 P F 2 9 1 3 7 1 4 8C 6 D 1 8 P F 2 9 0 4 24 0C 6 D 1 0 D S 2 9 E 41 3 1C 1 D 3 6 P F 2 9 1 3 5 1 4 6C 6 D 1 8 P F 2 9 0 3 33 9C 6 D 1 0 D S 2 9 E 31 3 1C 1 D 3 6 P F 2 9 1 3 3 1 4 6C 6 D 1 8 P F 2 9 0 3 23 9C 6 D 1 0 D S 2 9 E 11 3 2C 1 D 3 6 P F 2 9 0 4 7 1 4 61 - 1 4 3 7 2 6 2 - 4C 6 D 1 8 P F 2 9 0 2 34 0C 6 D 1 0 D S 2 9 D 41 3 1C 1 D 3 6 P F 2 9 0 4 5 Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired T y c o Acquired T y c o Acquired T y c o P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r ——— ——— ——— ——— —— —— —— ——— —— —— —— —— ——— ——— ——— ——— ——— ——— —— ——— —— ——— —— —— —— ——— ——— ——— —— —— ——— —— ——— —— ——— —— ——— —— —— — ——— ——— ——— ——— ——— ——— —— —— ——— ——— ——— —— —— ——— ——— —— ——— ——— ——— ——— ——— ——— ——— ——— ——— ——— ——— ——— ——— ——— ——— ——— ——— ——— ——— —— ——— —— —— ——— ——— —— —— ——— ——— —— ——— 197 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 4 2C 7 D 1 2 P F 2 9 0 2 34 0C 6 D 4 3 D S 2 9 D 43 9C 6 D 3 5 D S 2 9 B 3 1 4 2C 7 D 1 2 P F 2 9 0 2 23 96 - 1 4 3 7 2 7 3 - 6C 6 D 4 3 D S 2 9 D 33 9C 6 D 3 5 D S 2 9 B 1 1 4 4C 7 D 1 2 P F 2 9 0 1 33 9C 6 D 4 3 D S 2 9 D 14 0C 6 D 3 5 D S 2 9 A 4 1 4 4C 7 D 1 2 P F 2 9 0 1 24 0C 6 D 4 3 D S 2 9 C 43 9C 6 D 3 5 D S 2 9 A 3 1 4 2C 7 D 1 0 P F 2 9 1 4 33 96 - 1 4 3 7 2 7 3 - 4C 6 D 4 3 D S 2 9 C 33 9C 6 D 3 5 D S 2 9 A 1 1 4 2C 7 D 1 0 P F 2 9 1 4 23 96 - 1 4 3 7 2 7 3 - 2C 6 D 4 3 D S 2 9 C 11 4 6C 6 D 3 1 P F 2 9 1 4 3 1 4 4C 7 D 1 0 P F 2 9 1 3 34 0C 6 D 4 3 D S 2 9 B 41 4 6C 6 D 3 1 P F 2 9 1 4 2 1 4 4C 7 D 1 0 P F 2 9 1 3 23 9C 6 D 4 3 D S 2 9 B 31 4 8C 6 D 3 1 P F 2 9 1 3 3 1 4 4C 7 D 1 0 P F 2 9 0 4 33 96 - 1 4 3 7 2 7 3 - 1C 6 D 4 3 D S 2 9 B 11 4 8C 6 D 3 1 P F 2 9 1 3 2 1 4 4C 7 D 1 0 P F 2 9 0 4 24 06 - 1 4 3 7 2 7 3 - 0C 6 D 4 3 D S 2 9 A 41 4 8C 6 D 3 1 P F 2 9 0 4 3 1 4 2C 7 D 1 0 P F 2 9 0 3 33 9C 6 D 4 3 D S 2 9 A 31 4 8C 6 D 3 1 P F 2 9 0 4 2 1 4 2C 7 D 1 0 P F 2 9 0 3 23 95 - 1 4 3 7 2 7 3 - 9C 6 D 4 3 D S 2 9 A 11 4 6C 6 D 3 1 P F 2 9 0 3 3 1 4 2C 7 D 1 0 P F 2 9 0 2 31 4 6C 6 D 4 0 P F 2 9 1 4 31 4 6C 6 D 3 1 P F 2 9 0 3 2 1 4 2C 7 D 1 0 P F 2 9 0 2 21 4 6C 6 D 4 0 P F 2 9 1 4 21 4 6C 6 D 3 1 P F 2 9 0 2 3 1 4 4C 7 D 1 0 P F 2 9 0 1 31 4 8C 6 D 4 0 P F 2 9 1 3 31 4 6C 6 D 3 1 P F 2 9 0 2 2 1 4 4C 7 D 1 0 P F 2 9 0 1 21 4 8C 6 D 4 0 P F 2 9 1 3 21 4 8C 6 D 3 1 P F 2 9 0 1 3 3 7C 7 D 1 0 D S 2 9 E 41 4 8C 6 D 4 0 P F 2 9 0 4 31 4 8C 6 D 3 1 P F 2 9 0 1 2 3 6C 7 D 1 0 D S 2 9 E 31 4 8C 6 D 4 0 P F 2 9 0 4 24 0C 6 D 3 1 D S 2 9 E 4 3 6C 7 D 1 0 D S 2 9 E 11 4 6C 6 D 4 0 P F 2 9 0 3 33 9C 6 D 3 1 D S 2 9 E 3 3 7C 7 D 1 0 D S 2 9 D 41 4 6C 6 D 4 0 P F 2 9 0 3 23 9C 6 D 3 1 D S 2 9 E 1 3 6C 7 D 1 0 D S 2 9 D 31 4 6C 6 D 4 0 P F 2 9 0 2 34 0C 6 D 3 1 D S 2 9 D 4 3 6C 7 D 1 0 D S 2 9 D 11 4 6C 6 D 4 0 P F 2 9 0 2 23 9C 6 D 3 1 D S 2 9 D 3 3 7C 7 D 1 0 D S 2 9 C 41 4 8C 6 D 4 0 P F 2 9 0 1 33 9C 6 D 3 1 D S 2 9 D 1 3 6C 7 D 1 0 D S 2 9 C 31 4 8C 6 D 4 0 P F 2 9 0 1 24 0C 6 D 3 1 D S 2 9 C 4 3 6C 7 D 1 0 D S 2 9 C 14 0C 6 D 4 0 D S 2 9 E 43 9C 6 D 3 1 D S 2 9 C 3 3 7C 7 D 1 0 D S 2 9 B 43 9C 6 D 4 0 D S 2 9 E 33 9C 6 D 3 1 D S 2 9 C 1 3 6C 7 D 1 0 D S 2 9 B 33 9C 6 D 4 0 D S 2 9 E 14 0C 6 D 3 1 D S 2 9 B 4 3 6C 7 D 1 0 D S 2 9 B 14 0C 6 D 4 0 D S 2 9 D 43 9C 6 D 3 1 D S 2 9 B 3 3 7C 7 D 1 0 D S 2 9 A 43 9C 6 D 4 0 D S 2 9 D 33 9C 6 D 3 1 D S 2 9 B 1 3 6C 7 D 1 0 D S 2 9 A 33 9C 6 D 4 0 D S 2 9 D 14 0C 6 D 3 1 D S 2 9 A 4 3 6C 7 D 1 0 D S 2 9 A 14 0C 6 D 4 0 D S 2 9 C 43 9C 6 D 3 1 D S 2 9 A 3 1 4 2C 7 D 0 6 P F 2 9 1 4 33 9C 6 D 4 0 D S 2 9 C 33 95 - 1 4 3 7 2 7 3 - 2C 6 D 3 1 D S 2 9 A 1 1 4 2C 7 D 0 6 P F 2 9 1 4 23 9C 6 D 4 0 D S 2 9 C 11 4 6C 6 D 3 0 P F 2 9 1 4 3 1 4 4C 7 D 0 6 P F 2 9 1 3 34 0C 6 D 4 0 D S 2 9 B 41 4 6C 6 D 3 0 P F 2 9 1 4 2 1 4 4C 7 D 0 6 P F 2 9 1 3 23 95 - 1 4 3 7 2 7 3 - 8C 6 D 4 0 D S 2 9 B 31 4 8C 6 D 3 0 P F 2 9 1 3 3 1 4 40 - 1 4 3 7 2 6 3 - 8C 7 D 0 6 P F 2 9 0 4 33 9C 6 D 4 0 D S 2 9 B 11 4 8C 6 D 3 0 P F 2 9 1 3 2 1 4 4C 7 D 0 6 P F 2 9 0 4 24 0C 6 D 4 0 D S 2 9 A 41 4 8C 6 D 3 0 P F 2 9 0 4 3 1 4 2C 7 D 0 6 P F 2 9 0 3 33 9C 6 D 4 0 D S 2 9 A 31 4 8C 6 D 3 0 P F 2 9 0 4 2 1 4 2C 7 D 0 6 P F 2 9 0 3 23 9C 6 D 4 0 D S 2 9 A 11 4 6C 6 D 3 0 P F 2 9 0 3 3 1 4 20 - 1 4 3 7 2 6 3 - 7C 7 D 0 6 P F 2 9 0 2 31 4 6C 6 D 3 6 P F 2 9 1 4 31 4 6C 6 D 3 0 P F 2 9 0 3 2 1 4 2C 7 D 0 6 P F 2 9 0 2 21 4 6C 6 D 3 6 P F 2 9 1 4 21 4 62 - 1 4 3 7 2 6 2 - 9C 6 D 3 0 P F 2 9 0 2 3 1 4 4C 7 D 0 6 P F 2 9 0 1 31 4 8C 6 D 3 6 P F 2 9 1 3 31 4 6C 6 D 3 0 P F 2 9 0 2 2 1 4 4C 7 D 0 6 P F 2 9 0 1 21 4 8C 6 D 3 6 P F 2 9 1 3 21 4 8C 6 D 3 0 P F 2 9 0 1 3 3 7C 7 D 0 6 D S 2 9 E 41 4 8C 6 D 3 6 P F 2 9 0 4 31 4 8C 6 D 3 0 P F 2 9 0 1 2 3 6C 7 D 0 6 D S 2 9 E 31 4 8C 6 D 3 6 P F 2 9 0 4 24 0C 6 D 3 0 D S 2 9 E 4 3 6C 7 D 0 6 D S 2 9 E 11 4 6C 6 D 3 6 P F 2 9 0 3 33 9C 6 D 3 0 D S 2 9 E 3 3 7C 7 D 0 6 D S 2 9 D 41 4 6C 6 D 3 6 P F 2 9 0 3 23 9C 6 D 3 0 D S 2 9 E 1 3 6C 7 D 0 6 D S 2 9 D 31 4 63 - 1 4 3 7 2 6 2 - 4C 6 D 3 6 P F 2 9 0 2 34 05 - 1 4 3 7 2 7 3 - 1C 6 D 3 0 D S 2 9 D 4 3 6C 7 D 0 6 D S 2 9 D 11 4 6C 6 D 3 6 P F 2 9 0 2 23 95 - 1 4 3 7 2 7 3 - 0C 6 D 3 0 D S 2 9 D 3 3 7C 7 D 0 6 D S 2 9 C 41 4 83 - 1 4 3 7 2 6 2 - 3C 6 D 3 6 P F 2 9 0 1 33 9C 6 D 3 0 D S 2 9 D 1 3 6C 7 D 0 6 D S 2 9 C 31 4 8C 6 D 3 6 P F 2 9 0 1 24 0C 6 D 3 0 D S 2 9 C 4 3 60 - 1 4 3 7 2 7 4 - 3C 7 D 0 6 D S 2 9 C 14 05 - 1 4 3 7 2 7 3 - 7C 6 D 3 6 D S 2 9 E 43 94 - 1 4 3 7 2 7 3 - 9C 6 D 3 0 D S 2 9 C 3 3 7C 7 D 0 6 D S 2 9 B 43 9C 6 D 3 6 D S 2 9 E 33 94 - 1 4 3 7 2 7 3 - 8C 6 D 3 0 D S 2 9 C 1 3 6C 7 D 0 6 D S 2 9 B 33 9C 6 D 3 6 D S 2 9 E 14 0C 6 D 3 0 D S 2 9 B 4 3 6C 7 D 0 6 D S 2 9 B 14 05 - 1 4 3 7 2 7 3 - 6C 6 D 3 6 D S 2 9 D 43 9C 6 D 3 0 D S 2 9 B 3 3 7C 7 D 0 6 D S 2 9 A 43 9C 6 D 3 6 D S 2 9 D 33 9C 6 D 3 0 D S 2 9 B 1 3 6C 7 D 0 6 D S 2 9 A 33 95 - 1 4 3 7 2 7 3 - 5C 6 D 3 6 D S 2 9 D 14 0C 6 D 3 0 D S 2 9 A 4 3 6C 7 D 0 6 D S 2 9 A 14 0C 6 D 3 6 D S 2 9 C 43 9C 6 D 3 0 D S 2 9 A 3 4 0C 6 D 5 0 D S 2 9 E 43 93 - 1 4 3 7 2 6 4 - 3C 6 D 3 6 D S 2 9 C 33 9C 6 D 3 0 D S 2 9 A 1 3 9C 6 D 5 0 D S 2 9 E 33 95 - 1 4 3 7 2 7 3 - 4C 6 D 3 6 D S 2 9 C 11 4 6C 6 D 2 8 P F 2 9 1 4 3 3 9C 6 D 5 0 D S 2 9 E 14 0C 6 D 3 6 D S 2 9 B 41 4 6C 6 D 2 8 P F 2 9 1 4 2 4 0C 6 D 5 0 D S 2 9 D 43 9C 6 D 3 6 D S 2 9 B 31 4 8C 6 D 2 8 P F 2 9 1 3 3 3 9C 6 D 5 0 D S 2 9 D 33 9C 6 D 3 6 D S 2 9 B 11 4 8C 6 D 2 8 P F 2 9 1 3 2 3 9C 6 D 5 0 D S 2 9 D 14 0C 6 D 3 6 D S 2 9 A 41 4 82 - 1 4 3 7 2 6 2 - 8C 6 D 2 8 P F 2 9 0 4 3 4 0C 6 D 5 0 D S 2 9 C 43 95 - 1 4 3 7 2 7 3 - 3C 6 D 3 6 D S 2 9 A 31 4 8C 6 D 2 8 P F 2 9 0 4 2 3 9C 6 D 5 0 D S 2 9 C 33 9C 6 D 3 6 D S 2 9 A 11 4 62 - 1 4 3 7 2 6 2 - 7C 6 D 2 8 P F 2 9 0 3 3 3 9C 6 D 5 0 D S 2 9 C 11 4 6C 6 D 3 5 P F 2 9 1 4 31 4 6C 6 D 2 8 P F 2 9 0 3 2 4 0C 6 D 5 0 D S 2 9 B 41 4 6C 6 D 3 5 P F 2 9 1 4 21 4 62 - 1 4 3 7 2 6 2 - 6C 6 D 2 8 P F 2 9 0 2 3 3 9C 6 D 5 0 D S 2 9 B 31 4 8C 6 D 3 5 P F 2 9 1 3 31 4 6C 6 D 2 8 P F 2 9 0 2 2 3 9C 6 D 5 0 D S 2 9 B 11 4 8C 6 D 3 5 P F 2 9 1 3 21 4 82 - 1 4 3 7 2 6 2 - 4C 6 D 2 8 P F 2 9 0 1 3 4 0C 6 D 5 0 D S 2 9 A 41 4 8C 6 D 3 5 P F 2 9 0 4 31 4 8C 6 D 2 8 P F 2 9 0 1 2 3 9C 6 D 5 0 D S 2 9 A 31 4 8C 6 D 3 5 P F 2 9 0 4 24 0C 6 D 2 8 D S 2 9 E 4 3 9C 6 D 5 0 D S 2 9 A 11 4 6C 6 D 3 5 P F 2 9 0 3 33 9C 6 D 2 8 D S 2 9 E 3 1 4 6C 6 D 4 3 P F 2 9 1 4 31 4 6C 6 D 3 5 P F 2 9 0 3 23 9C 6 D 2 8 D S 2 9 E 1 1 4 6C 6 D 4 3 P F 2 9 1 4 21 4 6C 6 D 3 5 P F 2 9 0 2 34 0C 6 D 2 8 D S 2 9 D 4 1 4 8C 6 D 4 3 P F 2 9 1 3 31 4 6C 6 D 3 5 P F 2 9 0 2 23 9C 6 D 2 8 D S 2 9 D 3 1 4 8C 6 D 4 3 P F 2 9 1 3 21 4 8C 6 D 3 5 P F 2 9 0 1 33 94 - 1 4 3 7 2 7 3 - 7C 6 D 2 8 D S 2 9 D 1 1 4 84 - 1 4 3 7 2 6 2 - 0C 6 D 4 3 P F 2 9 0 4 31 4 8C 6 D 3 5 P F 2 9 0 1 24 0C 6 D 2 8 D S 2 9 C 4 1 4 8C 6 D 4 3 P F 2 9 0 4 24 0C 6 D 3 5 D S 2 9 E 43 94 - 1 4 3 7 2 7 3 - 6C 6 D 2 8 D S 2 9 C 3 1 4 6C 6 D 4 3 P F 2 9 0 3 33 9C 6 D 3 5 D S 2 9 E 33 94 - 1 4 3 7 2 7 3 - 4C 6 D 2 8 D S 2 9 C 1 1 4 6C 6 D 4 3 P F 2 9 0 3 23 9C 6 D 3 5 D S 2 9 E 14 0C 6 D 2 8 D S 2 9 B 4 1 4 63 - 1 4 3 7 2 6 2 - 9C 6 D 4 3 P F 2 9 0 2 34 0C 6 D 3 5 D S 2 9 D 43 9C 6 D 2 8 D S 2 9 B 3 1 4 63 - 1 4 3 7 2 6 2 - 8C 6 D 4 3 P F 2 9 0 2 23 9C 6 D 3 5 D S 2 9 D 33 9C 6 D 2 8 D S 2 9 B 1 1 4 83 - 1 4 3 7 2 6 2 - 6C 6 D 4 3 P F 2 9 0 1 33 9C 6 D 3 5 D S 2 9 D 14 0C 6 D 2 8 D S 2 9 A 4 1 4 8C 6 D 4 3 P F 2 9 0 1 24 0C 6 D 3 5 D S 2 9 C 43 9C 6 D 2 8 D S 2 9 A 3 4 0C 6 D 4 3 D S 2 9 E 43 9C 6 D 3 5 D S 2 9 C 33 9C 6 D 2 8 D S 2 9 A 1 3 9C 6 D 4 3 D S 2 9 E 33 9C 6 D 3 5 D S 2 9 C 11 4 6C 6 D 2 5 P F 2 9 1 4 3 3 9C 6 D 4 3 D S 2 9 E 14 0C 6 D 3 5 D S 2 9 B 41 4 6C 6 D 2 5 P F 2 9 1 4 2 Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired T y c o Acquired T y c o Acquired T y c o P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r ——— —— —— ——— —— ——— ——— —— ——— ——— ——— ——— ——— —— —— —— —— ——— ——— —— ——— ——— ——— ——— ——— ——— —— ——— ——— ——— —— ——— ——— ——— ——— ——— ——— ——— ——— —— —— —— —— ——— —— ——— —— —— —— — — —— —— — ——— —— —— —— —— —— ——— ——— —— —— ——— —— —— —— —— ——— —— ——— ——— ——— —— — —— ——— ——— ——— — ——— ——— —— —— —— —— ——— 198 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 3 6C 7 D 4 0 D S 2 9 A 11 4 2C 7 D 3 0 P F 2 9 0 3 33 6C 7 D 2 2 D S 2 9 E 3 1 4 2C 7 D 3 6 P F 2 9 1 4 31 4 22 - 1 4 3 7 2 7 4 - 7C 7 D 3 0 P F 2 9 0 3 23 6C 7 D 2 2 D S 2 9 E 1 1 4 2C 7 D 3 6 P F 2 9 1 4 21 4 23 - 1 4 3 7 2 6 3 - 2C 7 D 3 0 P F 2 9 0 2 33 7C 7 D 2 2 D S 2 9 D 4 1 4 4C 7 D 3 6 P F 2 9 1 3 31 4 2C 7 D 3 0 P F 2 9 0 2 23 61 - 1 4 3 7 2 7 4 - 0C 7 D 2 2 D S 2 9 D 3 1 4 4C 7 D 3 6 P F 2 9 1 3 21 4 43 - 1 4 3 7 2 6 3 - 1C 7 D 3 0 P F 2 9 0 1 33 6C 7 D 2 2 D S 2 9 D 1 1 4 4C 7 D 3 6 P F 2 9 0 4 31 4 4C 7 D 3 0 P F 2 9 0 1 23 7C 7 D 2 2 D S 2 9 C 4 1 4 4C 7 D 3 6 P F 2 9 0 4 23 7C 7 D 3 0 D S 2 9 E 43 6C 7 D 2 2 D S 2 9 C 3 1 4 24 - 1 4 3 7 2 6 3 - 3C 7 D 3 6 P F 2 9 0 3 33 6C 7 D 3 0 D S 2 9 E 33 60 - 1 4 3 7 2 7 4 - 9C 7 D 2 2 D S 2 9 C 1 1 4 2C 7 D 3 6 P F 2 9 0 3 23 6C 7 D 3 0 D S 2 9 E 13 7C 7 D 2 2 D S 2 9 B 4 1 4 2C 7 D 3 6 P F 2 9 0 2 33 7C 7 D 3 0 D S 2 9 D 43 6C 7 D 2 2 D S 2 9 B 3 1 4 2C 7 D 3 6 P F 2 9 0 2 23 6C 7 D 3 0 D S 2 9 D 33 6C 7 D 2 2 D S 2 9 B 1 1 4 44 - 1 4 3 7 2 6 3 - 2C 7 D 3 6 P F 2 9 0 1 33 6C 7 D 3 0 D S 2 9 D 13 7C 7 D 2 2 D S 2 9 A 4 1 4 44 - 1 4 3 7 2 6 3 - 1C 7 D 3 6 P F 2 9 0 1 23 72 - 1 4 3 7 2 7 4 - 6C 7 D 3 0 D S 2 9 C 43 6C 7 D 2 2 D S 2 9 A 3 3 7C 7 D 3 6 D S 2 9 E 43 62 - 1 4 3 7 2 7 4 - 5C 7 D 3 0 D S 2 9 C 33 6C 7 D 2 2 D S 2 9 A 1 3 6C 7 D 3 6 D S 2 9 E 33 6C 7 D 3 0 D S 2 9 C 11 4 2C 7 D 2 0 P F 2 9 1 4 3 3 6C 7 D 3 6 D S 2 9 E 13 7C 7 D 3 0 D S 2 9 B 41 4 2C 7 D 2 0 P F 2 9 1 4 2 3 7C 7 D 3 6 D S 2 9 D 43 6C 7 D 3 0 D S 2 9 B 31 4 4C 7 D 2 0 P F 2 9 1 3 3 3 63 - 1 4 3 7 2 7 4 - 4C 7 D 3 6 D S 2 9 D 33 6C 7 D 3 0 D S 2 9 B 11 4 4C 7 D 2 0 P F 2 9 1 3 2 3 6C 7 D 3 6 D S 2 9 D 13 7C 7 D 3 0 D S 2 9 A 41 4 4C 7 D 2 0 P F 2 9 0 4 3 3 7C 7 D 3 6 D S 2 9 C 43 62 - 1 4 3 7 2 7 4 - 4C 7 D 3 0 D S 2 9 A 31 4 4C 7 D 2 0 P F 2 9 0 4 2 3 63 - 1 4 3 7 2 7 4 - 3C 7 D 3 6 D S 2 9 C 33 6C 7 D 3 0 D S 2 9 A 11 4 2C 7 D 2 0 P F 2 9 0 3 3 3 63 - 1 4 3 7 2 7 4 - 2C 7 D 3 6 D S 2 9 C 11 4 2C 7 D 2 8 P F 2 9 1 4 31 4 2C 7 D 2 0 P F 2 9 0 3 2 3 7C 7 D 3 6 D S 2 9 B 41 4 2C 7 D 2 8 P F 2 9 1 4 21 4 22 - 1 4 3 7 2 6 3 - 1C 7 D 2 0 P F 2 9 0 2 3 3 6C 7 D 3 6 D S 2 9 B 31 4 4C 7 D 2 8 P F 2 9 1 3 31 4 2C 7 D 2 0 P F 2 9 0 2 2 3 6C 7 D 3 6 D S 2 9 B 11 4 4C 7 D 2 8 P F 2 9 1 3 21 4 42 - 1 4 3 7 2 6 3 - 0C 7 D 2 0 P F 2 9 0 1 3 3 7C 7 D 3 6 D S 2 9 A 41 4 4C 7 D 2 8 P F 2 9 0 4 31 4 41 - 1 4 3 7 2 6 3 - 9C 7 D 2 0 P F 2 9 0 1 2 3 6C 7 D 3 6 D S 2 9 A 31 4 4C 7 D 2 8 P F 2 9 0 4 21 4 2C 7 D 1 8 P F 2 9 1 4 3 3 6C 7 D 3 6 D S 2 9 A 11 4 2C 7 D 2 8 P F 2 9 0 3 31 4 2C 7 D 1 8 P F 2 9 1 4 2 1 4 2C 7 D 3 5 P F 2 9 1 4 31 4 22 - 1 4 3 7 2 7 4 - 3C 7 D 2 8 P F 2 9 0 3 21 4 4C 7 D 1 8 P F 2 9 1 3 3 1 4 2C 7 D 3 5 P F 2 9 1 4 21 4 22 - 1 4 3 7 2 6 3 - 9C 7 D 2 8 P F 2 9 0 2 31 4 4C 7 D 1 8 P F 2 9 1 3 2 1 4 4C 7 D 3 5 P F 2 9 1 3 31 4 2C 7 D 2 8 P F 2 9 0 2 21 4 41 - 1 4 3 7 2 6 3 - 8C 7 D 1 8 P F 2 9 0 4 3 1 4 4C 7 D 3 5 P F 2 9 1 3 21 4 42 - 1 4 3 7 2 6 3 - 8C 7 D 2 8 P F 2 9 0 1 31 4 4C 7 D 1 8 P F 2 9 0 4 2 1 4 4C 7 D 3 5 P F 2 9 0 4 31 4 42 - 1 4 3 7 2 6 3 - 7C 7 D 2 8 P F 2 9 0 1 21 4 2C 7 D 1 8 P F 2 9 0 3 3 1 4 4C 7 D 3 5 P F 2 9 0 4 23 7C 7 D 2 8 D S 2 9 E 41 4 2C 7 D 1 8 P F 2 9 0 3 2 1 4 2C 7 D 3 5 P F 2 9 0 3 33 62 - 1 4 3 7 2 7 4 - 2C 7 D 2 8 D S 2 9 E 31 4 21 - 1 4 3 7 2 6 3 - 7C 7 D 1 8 P F 2 9 0 2 3 1 4 2C 7 D 3 5 P F 2 9 0 3 23 6C 7 D 2 8 D S 2 9 E 11 4 21 - 1 4 3 7 2 6 3 - 6C 7 D 1 8 P F 2 9 0 2 2 1 4 2C 7 D 3 5 P F 2 9 0 2 33 7C 7 D 2 8 D S 2 9 D 41 4 41 - 1 4 3 7 2 6 3 - 5C 7 D 1 8 P F 2 9 0 1 3 1 4 2C 7 D 3 5 P F 2 9 0 2 23 62 - 1 4 3 7 2 7 4 - 0C 7 D 2 8 D S 2 9 D 31 4 41 - 1 4 3 7 2 6 3 - 4C 7 D 1 8 P F 2 9 0 1 2 1 4 44 - 1 4 3 7 2 6 3 - 0C 7 D 3 5 P F 2 9 0 1 33 61 - 1 4 3 7 2 7 4 - 9C 7 D 2 8 D S 2 9 D 13 7C 7 D 1 8 D S 2 9 E 4 1 4 43 - 1 4 3 7 2 6 3 - 9C 7 D 3 5 P F 2 9 0 1 23 7C 7 D 2 8 D S 2 9 C 43 6C 7 D 1 8 D S 2 9 E 3 3 7C 7 D 3 5 D S 2 9 E 43 61 - 1 4 3 7 2 7 4 - 8C 7 D 2 8 D S 2 9 C 33 6C 7 D 1 8 D S 2 9 E 1 3 6C 7 D 3 5 D S 2 9 E 33 61 - 1 4 3 7 2 7 4 - 7C 7 D 2 8 D S 2 9 C 13 7C 7 D 1 8 D S 2 9 D 4 3 6C 7 D 3 5 D S 2 9 E 13 7C 7 D 2 8 D S 2 9 B 43 6C 7 D 1 8 D S 2 9 D 3 3 7C 7 D 3 5 D S 2 9 D 43 61 - 1 4 3 7 2 7 4 - 6C 7 D 2 8 D S 2 9 B 33 6C 7 D 1 8 D S 2 9 D 1 3 6C 7 D 3 5 D S 2 9 D 33 6C 7 D 2 8 D S 2 9 B 13 7C 7 D 1 8 D S 2 9 C 4 3 6C 7 D 3 5 D S 2 9 D 13 7C 7 D 2 8 D S 2 9 A 43 60 - 1 4 3 7 2 7 4 - 8C 7 D 1 8 D S 2 9 C 3 3 7C 7 D 3 5 D S 2 9 C 43 61 - 1 4 3 7 2 7 4 - 4C 7 D 2 8 D S 2 9 A 33 6C 7 D 1 8 D S 2 9 C 1 3 6C 7 D 3 5 D S 2 9 C 33 61 - 1 4 3 7 2 7 4 - 3C 7 D 2 8 D S 2 9 A 13 7C 7 D 1 8 D S 2 9 B 4 3 63 - 1 4 3 7 2 7 4 - 1C 7 D 3 5 D S 2 9 C 11 4 2C 7 D 2 5 P F 2 9 1 4 33 6C 7 D 1 8 D S 2 9 B 3 3 7C 7 D 3 5 D S 2 9 B 41 4 2C 7 D 2 5 P F 2 9 1 4 23 6C 7 D 1 8 D S 2 9 B 1 3 6C 7 D 3 5 D S 2 9 B 31 4 4C 7 D 2 5 P F 2 9 1 3 33 7C 7 D 1 8 D S 2 9 A 4 3 6C 7 D 3 5 D S 2 9 B 11 4 4C 7 D 2 5 P F 2 9 1 3 23 6C 7 D 1 8 D S 2 9 A 3 3 7C 7 D 3 5 D S 2 9 A 41 4 4C 7 D 2 5 P F 2 9 0 4 33 6C 7 D 1 8 D S 2 9 A 1 3 6C 7 D 3 5 D S 2 9 A 31 4 4C 7 D 2 5 P F 2 9 0 4 21 4 2C 7 D 1 5 P F 2 9 1 4 3 3 6C 7 D 3 5 D S 2 9 A 11 4 2C 7 D 2 5 P F 2 9 0 3 31 4 2C 7 D 1 5 P F 2 9 1 4 2 1 4 2C 7 D 3 1 P F 2 9 1 4 31 4 2C 7 D 2 5 P F 2 9 0 3 21 4 4C 7 D 1 5 P F 2 9 1 3 3 1 4 2C 7 D 3 1 P F 2 9 1 4 21 4 2C 7 D 2 5 P F 2 9 0 2 31 4 4C 7 D 1 5 P F 2 9 1 3 2 1 4 4C 7 D 3 1 P F 2 9 1 3 31 4 2C 7 D 2 5 P F 2 9 0 2 21 4 4C 7 D 1 5 P F 2 9 0 4 3 1 4 4C 7 D 3 1 P F 2 9 1 3 21 4 4C 7 D 2 5 P F 2 9 0 1 31 4 4C 7 D 1 5 P F 2 9 0 4 2 1 4 4C 7 D 3 1 P F 2 9 0 4 31 4 4C 7 D 2 5 P F 2 9 0 1 21 4 2C 7 D 1 5 P F 2 9 0 3 3 1 4 4C 7 D 3 1 P F 2 9 0 4 23 7C 7 D 2 5 D S 2 9 E 41 4 2C 7 D 1 5 P F 2 9 0 3 2 1 4 2C 7 D 3 1 P F 2 9 0 3 33 6C 7 D 2 5 D S 2 9 E 31 4 2C 7 D 1 5 P F 2 9 0 2 3 1 4 2C 7 D 3 1 P F 2 9 0 3 23 6C 7 D 2 5 D S 2 9 E 11 4 2C 7 D 1 5 P F 2 9 0 2 2 1 4 2C 7 D 3 1 P F 2 9 0 2 33 7C 7 D 2 5 D S 2 9 D 41 4 4C 7 D 1 5 P F 2 9 0 1 3 1 4 2C 7 D 3 1 P F 2 9 0 2 23 6C 7 D 2 5 D S 2 9 D 31 4 4C 7 D 1 5 P F 2 9 0 1 2 1 4 4C 7 D 3 1 P F 2 9 0 1 33 6C 7 D 2 5 D S 2 9 D 13 7C 7 D 1 5 D S 2 9 E 4 1 4 4C 7 D 3 1 P F 2 9 0 1 23 7C 7 D 2 5 D S 2 9 C 43 6C 7 D 1 5 D S 2 9 E 3 3 7C 7 D 3 1 D S 2 9 E 43 6C 7 D 2 5 D S 2 9 C 33 6C 7 D 1 5 D S 2 9 E 1 3 6C 7 D 3 1 D S 2 9 E 33 61 - 1 4 3 7 2 7 4 - 1C 7 D 2 5 D S 2 9 C 13 7C 7 D 1 5 D S 2 9 D 4 3 6C 7 D 3 1 D S 2 9 E 13 7C 7 D 2 5 D S 2 9 B 43 6C 7 D 1 5 D S 2 9 D 3 3 7C 7 D 3 1 D S 2 9 D 43 6C 7 D 2 5 D S 2 9 B 33 6C 7 D 1 5 D S 2 9 D 1 3 63 - 1 4 3 7 2 7 4 - 0C 7 D 3 1 D S 2 9 D 33 6C 7 D 2 5 D S 2 9 B 13 7C 7 D 1 5 D S 2 9 C 4 3 6C 7 D 3 1 D S 2 9 D 13 7C 7 D 2 5 D S 2 9 A 43 60 - 1 4 3 7 2 7 4 - 7C 7 D 1 5 D S 2 9 C 3 3 7C 7 D 3 1 D S 2 9 C 43 6C 7 D 2 5 D S 2 9 A 33 60 - 1 4 3 7 2 7 4 - 5C 7 D 1 5 D S 2 9 C 1 3 62 - 1 4 3 7 2 7 4 - 9C 7 D 3 1 D S 2 9 C 33 6C 7 D 2 5 D S 2 9 A 13 7C 7 D 1 5 D S 2 9 B 4 3 6C 7 D 3 1 D S 2 9 C 11 4 2C 7 D 2 2 P F 2 9 1 4 33 6C 7 D 1 5 D S 2 9 B 3 3 7C 7 D 3 1 D S 2 9 B 41 4 2C 7 D 2 2 P F 2 9 1 4 23 6C 7 D 1 5 D S 2 9 B 1 3 6C 7 D 3 1 D S 2 9 B 31 4 4C 7 D 2 2 P F 2 9 1 3 33 7C 7 D 1 5 D S 2 9 A 4 3 6C 7 D 3 1 D S 2 9 B 11 4 4C 7 D 2 2 P F 2 9 1 3 23 6C 7 D 1 5 D S 2 9 A 3 3 7C 7 D 3 1 D S 2 9 A 41 4 4C 7 D 2 2 P F 2 9 0 4 33 6C 7 D 1 5 D S 2 9 A 1 3 62 - 1 4 3 7 2 7 4 - 8C 7 D 3 1 D S 2 9 A 31 4 4C 7 D 2 2 P F 2 9 0 4 21 4 2C 7 D 1 2 P F 2 9 1 4 3 3 6C 7 D 3 1 D S 2 9 A 11 4 2C 7 D 2 2 P F 2 9 0 3 31 4 2C 7 D 1 2 P F 2 9 1 4 2 1 4 2C 7 D 3 0 P F 2 9 1 4 31 4 2C 7 D 2 2 P F 2 9 0 3 21 4 4C 7 D 1 2 P F 2 9 1 3 3 1 4 2C 7 D 3 0 P F 2 9 1 4 21 4 22 - 1 4 3 7 2 6 3 - 4C 7 D 2 2 P F 2 9 0 2 31 4 4C 7 D 1 2 P F 2 9 1 3 2 1 4 4C 7 D 3 0 P F 2 9 1 3 31 4 2C 7 D 2 2 P F 2 9 0 2 21 4 4C 7 D 1 2 P F 2 9 0 4 3 1 4 4C 7 D 3 0 P F 2 9 1 3 21 4 42 - 1 4 3 7 2 6 3 - 3C 7 D 2 2 P F 2 9 0 1 31 4 4C 7 D 1 2 P F 2 9 0 4 2 1 4 43 - 1 4 3 7 2 6 3 - 3C 7 D 3 0 P F 2 9 0 4 31 4 4C 7 D 2 2 P F 2 9 0 1 21 4 2C 7 D 1 2 P F 2 9 0 3 3 1 4 4C 7 D 3 0 P F 2 9 0 4 23 7C 7 D 2 2 D S 2 9 E 41 4 2C 7 D 1 2 P F 2 9 0 3 2 Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired T y c o Acquired T y c o Acquired T y c o P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r —— —— ——— —— —— —— —— —— —— —— ——— ——— ——— ——— — —— ——— —— — ——— —— ——— —— —— —— —— —— —— ——— —— ——— —— — ——— — —— — —— ——— ——— —— —— ——— ——— —— ——— ——— ——— —— ——— ——— —— ——— —— —— — —— —— — —— — — —— —— ——— ——— —— —— —— ——— —— —— ——— —— —— ——— —— — ——— — —— — ——— ——— —— — 199 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 3 18 - 1 4 3 7 2 7 5 - 0C 8 D 2 5 D S 2 9 C 13 2C 8 D 1 5 D S 2 9 E 33 13 - 1 4 3 7 2 7 5 - 0C 8 D 0 6 D S 2 9 C 2 3 2C 8 D 2 5 D S 2 9 B 33 1C 8 D 1 5 D S 2 9 E 23 12 - 1 4 3 7 2 7 5 - 9C 8 D 0 6 D S 2 9 C 1 3 1C 8 D 2 5 D S 2 9 B 23 1C 8 D 1 5 D S 2 9 E 13 2C 8 D 0 6 D S 2 9 B 3 3 1C 8 D 2 5 D S 2 9 B 13 2C 8 D 1 5 D S 2 9 D 33 1C 8 D 0 6 D S 2 9 B 2 3 27 - 1 4 3 7 2 7 5 - 9C 8 D 2 5 D S 2 9 A 33 15 - 1 4 3 7 2 7 5 - 6C 8 D 1 5 D S 2 9 D 23 1C 8 D 0 6 D S 2 9 B 1 3 1C 8 D 2 5 D S 2 9 A 23 15 - 1 4 3 7 2 7 5 - 5C 8 D 1 5 D S 2 9 D 13 2C 8 D 0 6 D S 2 9 A 3 3 17 - 1 4 3 7 2 7 5 - 8C 8 D 2 5 D S 2 9 A 13 25 - 1 4 3 7 2 7 5 - 4C 8 D 1 5 D S 2 9 C 33 1C 8 D 0 6 D S 2 9 A 2 1 3 8C 8 D 2 2 P F 2 9 1 4 33 1C 8 D 1 5 D S 2 9 C 23 1C 8 D 0 6 D S 2 9 A 1 1 3 8C 8 D 2 2 P F 2 9 1 4 23 15 - 1 4 3 7 2 7 5 - 2C 8 D 1 5 D S 2 9 C 11 4 25 - 1 4 3 7 2 6 3 - 7C 7 D 5 0 P F 2 9 1 4 3 1 4 0C 8 D 2 2 P F 2 9 1 3 33 25 - 1 4 3 7 2 7 5 - 1C 8 D 1 5 D S 2 9 B 31 4 2C 7 D 5 0 P F 2 9 1 4 2 1 4 0C 8 D 2 2 P F 2 9 1 3 23 1C 8 D 1 5 D S 2 9 B 21 4 4C 7 D 5 0 P F 2 9 1 3 3 1 4 04 - 1 4 3 7 2 6 0 - 1C 8 D 2 2 P F 2 9 0 4 33 1C 8 D 1 5 D S 2 9 B 11 4 4C 7 D 5 0 P F 2 9 1 3 2 1 4 0C 8 D 2 2 P F 2 9 0 4 23 2C 8 D 1 5 D S 2 9 A 31 4 45 - 1 4 3 7 2 6 3 - 4C 7 D 5 0 P F 2 9 0 4 3 1 3 8C 8 D 2 2 P F 2 9 0 3 33 1C 8 D 1 5 D S 2 9 A 21 4 4C 7 D 5 0 P F 2 9 0 4 2 1 3 8C 8 D 2 2 P F 2 9 0 3 23 1C 8 D 1 5 D S 2 9 A 11 4 25 - 1 4 3 7 2 6 3 - 3C 7 D 5 0 P F 2 9 0 3 3 1 3 84 - 1 4 3 7 2 6 0 - 0C 8 D 2 2 P F 2 9 0 2 31 3 8C 8 D 1 2 P F 2 9 1 4 31 4 2C 7 D 5 0 P F 2 9 0 3 2 1 3 8C 8 D 2 2 P F 2 9 0 2 21 3 8C 8 D 1 2 P F 2 9 1 4 21 4 2C 7 D 5 0 P F 2 9 0 2 3 1 4 03 - 1 4 3 7 2 6 0 - 8C 8 D 2 2 P F 2 9 0 1 31 4 0C 8 D 1 2 P F 2 9 1 3 31 4 2C 7 D 5 0 P F 2 9 0 2 2 1 4 0C 8 D 2 2 P F 2 9 0 1 21 4 0C 8 D 1 2 P F 2 9 1 3 21 4 45 - 1 4 3 7 2 6 3 - 2C 7 D 5 0 P F 2 9 0 1 3 3 2C 8 D 2 2 D S 2 9 E 31 4 02 - 1 4 3 7 2 6 0 - 6C 8 D 1 2 P F 2 9 0 4 31 4 4C 7 D 5 0 P F 2 9 0 1 2 3 1C 8 D 2 2 D S 2 9 E 21 4 0C 8 D 1 2 P F 2 9 0 4 23 7C 7 D 5 0 D S 2 9 E 4 3 1C 8 D 2 2 D S 2 9 E 11 3 8C 8 D 1 2 P F 2 9 0 3 33 6C 7 D 5 0 D S 2 9 E 3 3 2C 8 D 2 2 D S 2 9 D 31 3 8C 8 D 1 2 P F 2 9 0 3 23 65 - 1 4 3 7 2 7 4 - 0C 7 D 5 0 D S 2 9 E 1 3 1C 8 D 2 2 D S 2 9 D 21 3 82 - 1 4 3 7 2 6 0 - 5C 8 D 1 2 P F 2 9 0 2 33 7C 7 D 5 0 D S 2 9 D 4 3 17 - 1 4 3 7 2 7 5 - 7C 8 D 2 2 D S 2 9 D 11 3 8C 8 D 1 2 P F 2 9 0 2 23 64 - 1 4 3 7 2 7 4 - 8C 7 D 5 0 D S 2 9 D 3 3 27 - 1 4 3 7 2 7 5 - 6C 8 D 2 2 D S 2 9 C 31 4 02 - 1 4 3 7 2 6 0 - 4C 8 D 1 2 P F 2 9 0 1 33 6C 7 D 5 0 D S 2 9 D 1 3 1C 8 D 2 2 D S 2 9 C 21 4 0C 8 D 1 2 P F 2 9 0 1 23 74 - 1 4 3 7 2 7 4 - 6C 7 D 5 0 D S 2 9 C 4 3 17 - 1 4 3 7 2 7 5 - 4C 8 D 2 2 D S 2 9 C 13 2C 8 D 1 2 D S 2 9 E 33 64 - 1 4 3 7 2 7 4 - 5C 7 D 5 0 D S 2 9 C 3 3 2C 8 D 2 2 D S 2 9 B 33 1C 8 D 1 2 D S 2 9 E 23 64 - 1 4 3 7 2 7 4 - 4C 7 D 5 0 D S 2 9 C 1 3 1C 8 D 2 2 D S 2 9 B 23 15 - 1 4 3 7 2 7 4 - 1C 8 D 1 2 D S 2 9 E 13 7C 7 D 5 0 D S 2 9 B 4 3 17 - 1 4 3 7 2 7 5 - 3C 8 D 2 2 D S 2 9 B 13 2C 8 D 1 2 D S 2 9 D 33 65 - 1 4 3 7 2 6 3 - 1C 7 D 5 0 D S 2 9 B 3 3 27 - 1 4 3 7 2 7 5 - 2C 8 D 2 2 D S 2 9 A 33 1C 8 D 1 2 D S 2 9 D 23 6C 7 D 5 0 D S 2 9 B 1 3 1C 8 D 2 2 D S 2 9 A 23 14 - 1 4 3 7 2 7 5 - 8C 8 D 1 2 D S 2 9 D 13 7C 7 D 5 0 D S 2 9 A 4 3 17 - 1 4 3 7 2 7 5 - 1C 8 D 2 2 D S 2 9 A 13 24 - 1 4 3 7 2 7 5 - 7C 8 D 1 2 D S 2 9 C 33 64 - 1 4 3 7 2 7 4 - 3C 7 D 5 0 D S 2 9 A 3 1 3 8C 8 D 2 0 P F 2 9 1 4 33 1C 8 D 1 2 D S 2 9 C 23 6C 7 D 5 0 D S 2 9 A 1 1 3 8C 8 D 2 0 P F 2 9 1 4 23 14 - 1 4 3 7 2 7 5 - 5C 8 D 1 2 D S 2 9 C 11 4 2C 7 D 4 3 P F 2 9 1 4 3 1 4 0C 8 D 2 0 P F 2 9 1 3 33 2C 8 D 1 2 D S 2 9 B 31 4 2C 7 D 4 3 P F 2 9 1 4 2 1 4 0C 8 D 2 0 P F 2 9 1 3 23 1C 8 D 1 2 D S 2 9 B 21 4 4C 7 D 4 3 P F 2 9 1 3 3 1 4 03 - 1 4 3 7 2 6 0 - 6C 8 D 2 0 P F 2 9 0 4 33 1C 8 D 1 2 D S 2 9 B 11 4 4C 7 D 4 3 P F 2 9 1 3 2 1 4 0C 8 D 2 0 P F 2 9 0 4 23 2C 8 D 1 2 D S 2 9 A 31 4 4C 7 D 4 3 P F 2 9 0 4 3 1 3 8C 8 D 2 0 P F 2 9 0 3 33 1C 8 D 1 2 D S 2 9 A 21 4 4C 7 D 4 3 P F 2 9 0 4 2 1 3 8C 8 D 2 0 P F 2 9 0 3 23 1C 8 D 1 2 D S 2 9 A 11 4 2C 7 D 4 3 P F 2 9 0 3 3 1 3 83 - 1 4 3 7 2 6 0 - 5C 8 D 2 0 P F 2 9 0 2 31 3 8C 8 D 1 0 P F 2 9 1 4 31 4 2C 7 D 4 3 P F 2 9 0 3 2 1 3 8C 8 D 2 0 P F 2 9 0 2 21 3 8C 8 D 1 0 P F 2 9 1 4 21 4 2C 7 D 4 3 P F 2 9 0 2 3 1 4 0C 8 D 2 0 P F 2 9 0 1 31 4 0C 8 D 1 0 P F 2 9 1 3 31 4 2C 7 D 4 3 P F 2 9 0 2 2 1 4 0C 8 D 2 0 P F 2 9 0 1 21 4 0C 8 D 1 0 P F 2 9 1 3 21 4 45 - 1 4 3 7 2 6 3 - 0C 7 D 4 3 P F 2 9 0 1 3 3 2C 8 D 2 0 D S 2 9 E 31 4 02 - 1 4 3 7 2 6 0 - 3C 8 D 1 0 P F 2 9 0 4 31 4 4C 7 D 4 3 P F 2 9 0 1 2 3 1C 8 D 2 0 D S 2 9 E 21 4 0C 8 D 1 0 P F 2 9 0 4 23 7C 7 D 4 3 D S 2 9 E 4 3 1C 8 D 2 0 D S 2 9 E 11 3 8C 8 D 1 0 P F 2 9 0 3 33 6C 7 D 4 3 D S 2 9 E 3 3 27 - 1 4 3 7 2 7 5 - 0C 8 D 2 0 D S 2 9 D 31 3 8C 8 D 1 0 P F 2 9 0 3 23 6C 7 D 4 3 D S 2 9 E 1 3 1C 8 D 2 0 D S 2 9 D 21 3 82 - 1 4 3 7 2 6 0 - 2C 8 D 1 0 P F 2 9 0 2 33 74 - 1 4 3 7 2 7 4 - 1C 7 D 4 3 D S 2 9 D 4 3 16 - 1 4 3 7 2 7 5 - 9C 8 D 2 0 D S 2 9 D 11 3 8C 8 D 1 0 P F 2 9 0 2 23 6C 7 D 4 3 D S 2 9 D 3 3 26 - 1 4 3 7 2 7 5 - 8C 8 D 2 0 D S 2 9 C 31 4 02 - 1 4 3 7 2 6 0 - 0C 8 D 1 0 P F 2 9 0 1 33 6C 7 D 4 3 D S 2 9 D 1 3 1C 8 D 2 0 D S 2 9 C 21 4 0C 8 D 1 0 P F 2 9 0 1 23 7C 7 D 4 3 D S 2 9 C 4 3 16 - 1 4 3 7 2 7 5 - 6C 8 D 2 0 D S 2 9 C 13 2C 8 D 1 0 D S 2 9 E 33 64 - 1 4 3 7 2 7 4 - 0C 7 D 4 3 D S 2 9 C 3 3 2C 8 D 2 0 D S 2 9 B 33 1C 8 D 1 0 D S 2 9 E 23 63 - 1 4 3 7 2 7 4 - 9C 7 D 4 3 D S 2 9 C 1 3 1C 8 D 2 0 D S 2 9 B 23 1C 8 D 1 0 D S 2 9 E 13 7C 7 D 4 3 D S 2 9 B 4 3 1C 8 D 2 0 D S 2 9 B 13 24 - 1 4 3 7 2 7 5 - 1C 8 D 1 0 D S 2 9 D 33 6C 7 D 4 3 D S 2 9 B 3 3 2C 8 D 2 0 D S 2 9 A 33 1C 8 D 1 0 D S 2 9 D 23 6C 7 D 4 3 D S 2 9 B 1 3 1C 8 D 2 0 D S 2 9 A 23 14 - 1 4 3 7 2 7 5 - 0C 8 D 1 0 D S 2 9 D 13 7C 7 D 4 3 D S 2 9 A 4 3 1C 8 D 2 0 D S 2 9 A 13 23 - 1 4 3 7 2 7 5 - 9C 8 D 1 0 D S 2 9 C 33 6C 7 D 4 3 D S 2 9 A 3 3 2C 8 D 1 8 D S 2 9 E 33 13 - 1 4 3 7 2 7 5 - 8C 8 D 1 0 D S 2 9 C 23 6C 7 D 4 3 D S 2 9 A 1 3 1C 8 D 1 8 D S 2 9 E 23 13 - 1 4 3 7 2 7 5 - 6C 8 D 1 0 D S 2 9 C 11 4 2C 7 D 4 0 P F 2 9 1 4 3 3 16 - 1 4 3 7 2 7 5 - 4C 8 D 1 8 D S 2 9 E 13 2C 8 D 1 0 D S 2 9 B 31 4 2C 7 D 4 0 P F 2 9 1 4 2 3 26 - 1 4 3 7 2 7 5 - 3C 8 D 1 8 D S 2 9 D 33 1C 8 D 1 0 D S 2 9 B 21 4 4C 7 D 4 0 P F 2 9 1 3 3 3 1C 8 D 1 8 D S 2 9 D 23 1C 8 D 1 0 D S 2 9 B 11 4 4C 7 D 4 0 P F 2 9 1 3 2 3 16 - 1 4 3 7 2 7 5 - 2C 8 D 1 8 D S 2 9 D 13 23 - 1 4 3 7 2 7 5 - 5C 8 D 1 0 D S 2 9 A 31 4 44 - 1 4 3 7 2 6 3 - 8C 7 D 4 0 P F 2 9 0 4 3 3 26 - 1 4 3 7 2 7 5 - 1C 8 D 1 8 D S 2 9 C 33 1C 8 D 1 0 D S 2 9 A 21 4 4C 7 D 4 0 P F 2 9 0 4 2 3 1C 8 D 1 8 D S 2 9 C 23 1C 8 D 1 0 D S 2 9 A 11 4 2C 7 D 4 0 P F 2 9 0 3 3 3 15 - 1 4 3 7 2 7 5 - 9C 8 D 1 8 D S 2 9 C 11 3 8C 8 D 0 6 P F 2 9 1 4 31 4 24 - 1 4 3 7 2 6 3 - 7C 7 D 4 0 P F 2 9 0 3 2 3 2C 8 D 1 8 D S 2 9 B 31 3 8C 8 D 0 6 P F 2 9 1 4 21 4 24 - 1 4 3 7 2 6 3 - 6C 7 D 4 0 P F 2 9 0 2 3 3 1C 8 D 1 8 D S 2 9 B 21 4 0C 8 D 0 6 P F 2 9 1 3 31 4 2C 7 D 4 0 P F 2 9 0 2 2 3 1C 8 D 1 8 D S 2 9 B 11 4 0C 8 D 0 6 P F 2 9 1 3 21 4 44 - 1 4 3 7 2 6 3 - 5C 7 D 4 0 P F 2 9 0 1 3 3 2C 8 D 1 8 D S 2 9 A 31 4 01 - 1 4 3 7 2 6 0 - 5C 8 D 0 6 P F 2 9 0 4 31 4 44 - 1 4 3 7 2 6 3 - 4C 7 D 4 0 P F 2 9 0 1 2 3 1C 8 D 1 8 D S 2 9 A 21 4 0C 8 D 0 6 P F 2 9 0 4 23 7C 7 D 4 0 D S 2 9 E 4 3 1C 8 D 1 8 D S 2 9 A 11 3 8C 8 D 0 6 P F 2 9 0 3 33 6C 7 D 4 0 D S 2 9 E 3 1 3 8C 8 D 1 5 P F 2 9 1 4 31 3 8C 8 D 0 6 P F 2 9 0 3 23 6C 7 D 4 0 D S 2 9 E 1 1 3 8C 8 D 1 5 P F 2 9 1 4 21 3 8C 8 D 0 6 P F 2 9 0 2 33 7C 7 D 4 0 D S 2 9 D 4 1 4 0C 8 D 1 5 P F 2 9 1 3 31 3 8C 8 D 0 6 P F 2 9 0 2 23 63 - 1 4 3 7 2 7 4 - 8C 7 D 4 0 D S 2 9 D 3 1 4 0C 8 D 1 5 P F 2 9 1 3 21 4 01 - 1 4 3 7 2 6 0 - 4C 8 D 0 6 P F 2 9 0 1 33 6C 7 D 4 0 D S 2 9 D 1 1 4 03 - 1 4 3 7 2 6 0 - 0C 8 D 1 5 P F 2 9 0 4 31 4 0C 8 D 0 6 P F 2 9 0 1 23 7C 7 D 4 0 D S 2 9 C 4 1 4 0C 8 D 1 5 P F 2 9 0 4 23 2C 8 D 0 6 D S 2 9 E 33 63 - 1 4 3 7 2 7 4 - 7C 7 D 4 0 D S 2 9 C 3 1 3 8C 8 D 1 5 P F 2 9 0 3 33 1C 8 D 0 6 D S 2 9 E 23 63 - 1 4 3 7 2 7 4 - 6C 7 D 4 0 D S 2 9 C 1 1 3 8C 8 D 1 5 P F 2 9 0 3 23 13 - 1 4 3 7 2 7 5 - 2C 8 D 0 6 D S 2 9 E 13 7C 7 D 4 0 D S 2 9 B 4 1 3 82 - 1 4 3 7 2 6 0 - 9C 8 D 1 5 P F 2 9 0 2 33 2C 8 D 0 6 D S 2 9 D 33 6C 7 D 4 0 D S 2 9 B 3 1 3 8C 8 D 1 5 P F 2 9 0 2 23 1C 8 D 0 6 D S 2 9 D 23 6C 7 D 4 0 D S 2 9 B 1 1 4 02 - 1 4 3 7 2 6 0 - 7C 8 D 1 5 P F 2 9 0 1 33 1C 8 D 0 6 D S 2 9 D 13 7C 7 D 4 0 D S 2 9 A 4 1 4 0C 8 D 1 5 P F 2 9 0 1 23 23 - 1 4 3 7 2 7 5 - 1C 8 D 0 6 D S 2 9 C 33 6C 7 D 4 0 D S 2 9 A 3 Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired T y c o Acquired T y c o Acquired T y c o P a g eP a g eP a g e Part Part Part Part Part Part N u m b e rN u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e rN u m b e rN u m b e r ——— — — ——— — ——— ——— ——— —— — —— —— —— — —— —— ——— —— —— ——— ——— — —— —— —— ——— —— —— —— —— ——— — ——— —— ——— — ——— ——— —— —— ——— —— — ——— ——— ——— —— —— —— — —— — ——— — —— — — —— — —— — — — —— —— —— ——— — —— — ——— — ——— —— ——— —— — ——— — ——— — —— —— —— ——— — ——— ——— 200 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 1 3 8C 8 D 6 0 P F 2 9 1 4 21 3 8C 8 D 4 0 P F 2 9 0 3 33 1C 8 D 3 1 D S 2 9 E 2 1 4 0C 8 D 6 0 P F 2 9 1 3 31 3 8C 8 D 4 0 P F 2 9 0 3 23 1C 8 D 3 1 D S 2 9 E 1 1 4 0C 8 D 6 0 P F 2 9 1 3 21 3 88 - 1 4 3 7 2 6 0 - 4C 8 D 4 0 P F 2 9 0 2 33 20 - 1 4 3 7 2 7 6 - 9C 8 D 3 1 D S 2 9 D 3 1 4 0C 8 D 6 0 P F 2 9 0 4 31 3 8C 8 D 4 0 P F 2 9 0 2 23 1C 8 D 3 1 D S 2 9 D 2 1 4 0C 8 D 6 0 P F 2 9 0 4 21 4 0C 8 D 4 0 P F 2 9 0 1 33 10 - 1 4 3 7 2 7 6 - 8C 8 D 3 1 D S 2 9 D 1 1 3 8C 8 D 6 0 P F 2 9 0 3 31 4 0C 8 D 4 0 P F 2 9 0 1 23 20 - 1 4 3 7 2 7 6 - 6C 8 D 3 1 D S 2 9 C 3 1 3 8C 8 D 6 0 P F 2 9 0 3 23 2C 8 D 4 0 D S 2 9 E 33 10 - 1 4 3 7 2 7 6 - 5C 8 D 3 1 D S 2 9 C 2 1 3 81 - 1 4 3 7 2 6 1 - 1C 8 D 6 0 P F 2 9 0 2 33 1C 8 D 4 0 D S 2 9 E 23 10 - 1 4 3 7 2 7 6 - 3C 8 D 3 1 D S 2 9 C 1 1 3 8C 8 D 6 0 P F 2 9 0 2 23 1C 8 D 4 0 D S 2 9 E 13 2C 8 D 3 1 D S 2 9 B 3 1 4 05 - 1 4 3 7 2 7 6 - 8C 8 D 6 0 P F 2 9 0 1 33 23 - 1 4 3 7 2 7 6 - 1C 8 D 4 0 D S 2 9 D 33 1C 8 D 3 1 D S 2 9 B 2 1 4 0C 8 D 6 0 P F 2 9 0 1 23 1C 8 D 4 0 D S 2 9 D 23 1C 8 D 3 1 D S 2 9 B 1 3 2C 8 D 6 0 D S 2 9 E 33 13 - 1 4 3 7 2 7 6 - 0C 8 D 4 0 D S 2 9 D 13 20 - 1 4 3 7 2 7 6 - 2C 8 D 3 1 D S 2 9 A 3 3 2C 8 D 6 0 D S 2 9 E 23 22 - 1 4 3 7 2 7 6 - 9C 8 D 4 0 D S 2 9 C 33 1C 8 D 3 1 D S 2 9 A 2 3 1C 8 D 6 0 D S 2 9 E 13 1C 8 D 4 0 D S 2 9 C 23 1C 8 D 3 1 D S 2 9 A 1 3 2C 8 D 6 0 D S 2 9 D 33 12 - 1 4 3 7 2 7 6 - 7C 8 D 4 0 D S 2 9 C 11 3 8C 8 D 3 0 P F 2 9 1 4 3 3 2C 8 D 6 0 D S 2 9 D 23 2C 8 D 4 0 D S 2 9 B 31 3 8C 8 D 3 0 P F 2 9 1 4 2 3 15 - 1 4 3 7 2 7 6 - 7C 8 D 6 0 D S 2 9 D 13 1C 8 D 4 0 D S 2 9 B 21 4 06 - 1 4 3 7 2 6 0 - 4C 8 D 3 0 P F 2 9 1 3 3 3 2C 8 D 6 0 D S 2 9 C 33 1C 8 D 4 0 D S 2 9 B 11 4 0C 8 D 3 0 P F 2 9 1 3 2 3 2C 8 D 6 0 D S 2 9 C 23 22 - 1 4 3 7 2 7 6 - 6C 8 D 4 0 D S 2 9 A 31 4 06 - 1 4 3 7 2 6 0 - 1C 8 D 3 0 P F 2 9 0 4 3 3 15 - 1 4 3 7 2 7 6 - 4C 8 D 6 0 D S 2 9 C 13 1C 8 D 4 0 D S 2 9 A 21 4 0C 8 D 3 0 P F 2 9 0 4 2 3 25 - 1 4 3 7 2 7 6 - 3C 8 D 6 0 D S 2 9 B 33 12 - 1 4 3 7 2 7 6 - 5C 8 D 4 0 D S 2 9 A 11 3 8C 8 D 3 0 P F 2 9 0 3 3 3 2C 8 D 6 0 D S 2 9 B 21 3 8C 8 D 3 6 P F 2 9 1 4 31 3 8C 8 D 3 0 P F 2 9 0 3 2 3 1C 8 D 6 0 D S 2 9 B 11 3 8C 8 D 3 6 P F 2 9 1 4 21 3 85 - 1 4 3 7 2 6 0 - 8C 8 D 3 0 P F 2 9 0 2 3 3 25 - 1 4 3 7 2 7 6 - 2C 8 D 6 0 D S 2 9 A 31 4 0C 8 D 3 6 P F 2 9 1 3 31 3 8C 8 D 3 0 P F 2 9 0 2 2 3 2C 8 D 6 0 D S 2 9 A 21 4 0C 8 D 3 6 P F 2 9 1 3 21 4 05 - 1 4 3 7 2 6 0 - 6C 8 D 3 0 P F 2 9 0 1 3 3 15 - 1 4 3 7 2 7 6 - 1C 8 D 6 0 D S 2 9 A 11 4 08 - 1 4 3 7 2 6 0 - 2C 8 D 3 6 P F 2 9 0 4 31 4 0C 8 D 3 0 P F 2 9 0 1 2 2 94 - 1 4 3 7 2 7 6 - 7C 8 D 5 2 D S 2 9 C 1 M 1 9 51 4 0C 8 D 3 6 P F 2 9 0 4 23 29 - 1 4 3 7 2 7 5 - 9C 8 D 3 0 D S 2 9 E 3 2 94 - 1 4 3 7 2 7 6 - 6C 8 D 5 2 D S 2 9 C 1 M 1 9 11 3 88 - 1 4 3 7 2 6 0 - 1C 8 D 3 6 P F 2 9 0 3 33 1C 8 D 3 0 D S 2 9 E 2 1 3 8C 8 D 5 0 P F 2 9 1 4 31 3 8C 8 D 3 6 P F 2 9 0 3 23 19 - 1 4 3 7 2 7 5 - 8C 8 D 3 0 D S 2 9 E 1 1 3 8C 8 D 5 0 P F 2 9 1 4 21 3 88 - 1 4 3 7 2 6 0 - 0C 8 D 3 6 P F 2 9 0 2 33 29 - 1 4 3 7 2 7 5 - 7C 8 D 3 0 D S 2 9 D 3 1 4 0C 8 D 5 0 P F 2 9 1 3 31 3 87 - 1 4 3 7 2 6 0 - 9C 8 D 3 6 P F 2 9 0 2 23 1C 8 D 3 0 D S 2 9 D 2 1 4 0C 8 D 5 0 P F 2 9 1 3 21 4 07 - 1 4 3 7 2 6 0 - 7C 8 D 3 6 P F 2 9 0 1 33 19 - 1 4 3 7 2 7 5 - 6C 8 D 3 0 D S 2 9 D 1 1 4 00 - 1 4 3 7 2 6 1 - 6C 8 D 5 0 P F 2 9 0 4 31 4 0C 8 D 3 6 P F 2 9 0 1 23 29 - 1 4 3 7 2 7 5 - 5C 8 D 3 0 D S 2 9 C 3 1 4 0C 8 D 5 0 P F 2 9 0 4 23 22 - 1 4 3 7 2 7 6 - 3C 8 D 3 6 D S 2 9 E 33 1C 8 D 3 0 D S 2 9 C 2 1 3 80 - 1 4 3 7 2 6 1 - 5C 8 D 5 0 P F 2 9 0 3 33 1C 8 D 3 6 D S 2 9 E 23 19 - 1 4 3 7 2 7 5 - 3C 8 D 3 0 D S 2 9 C 1 1 3 8C 8 D 5 0 P F 2 9 0 3 23 1C 8 D 3 6 D S 2 9 E 13 2C 8 D 3 0 D S 2 9 B 3 1 3 80 - 1 4 3 7 2 6 1 - 2C 8 D 5 0 P F 2 9 0 2 33 22 - 1 4 3 7 2 7 6 - 2C 8 D 3 6 D S 2 9 D 33 1C 8 D 3 0 D S 2 9 B 2 1 3 8C 8 D 5 0 P F 2 9 0 2 23 12 - 1 4 3 7 2 7 6 - 1C 8 D 3 6 D S 2 9 D 23 1C 8 D 3 0 D S 2 9 B 1 1 4 09 - 1 4 3 7 2 6 0 - 9C 8 D 5 0 P F 2 9 0 1 33 12 - 1 4 3 7 2 7 6 - 0C 8 D 3 6 D S 2 9 D 13 2C 8 D 3 0 D S 2 9 A 3 1 4 0C 8 D 5 0 P F 2 9 0 1 23 21 - 1 4 3 7 2 7 6 - 9C 8 D 3 6 D S 2 9 C 33 1C 8 D 3 0 D S 2 9 A 2 3 2C 8 D 5 0 D S 2 9 E 33 11 - 1 4 3 7 2 7 6 - 8C 8 D 3 6 D S 2 9 C 23 1C 8 D 3 0 D S 2 9 A 1 3 2C 8 D 5 0 D S 2 9 E 23 11 - 1 4 3 7 2 7 6 - 6C 8 D 3 6 D S 2 9 C 11 3 8C 8 D 2 8 P F 2 9 1 4 3 3 1C 8 D 5 0 D S 2 9 E 13 2C 8 D 3 6 D S 2 9 B 31 3 8C 8 D 2 8 P F 2 9 1 4 2 3 2C 8 D 5 0 D S 2 9 D 33 1C 8 D 3 6 D S 2 9 B 21 4 0C 8 D 2 8 P F 2 9 1 3 3 3 2C 8 D 5 0 D S 2 9 D 23 1C 8 D 3 6 D S 2 9 B 11 4 0C 8 D 2 8 P F 2 9 1 3 2 3 14 - 1 4 3 7 2 7 6 - 3C 8 D 5 0 D S 2 9 D 13 21 - 1 4 3 7 2 7 6 - 5C 8 D 3 6 D S 2 9 A 31 4 0C 8 D 2 8 P F 2 9 0 4 3 3 24 - 1 4 3 7 2 7 6 - 2C 8 D 5 0 D S 2 9 C 33 1C 8 D 3 6 D S 2 9 A 21 4 0C 8 D 2 8 P F 2 9 0 4 2 3 2C 8 D 5 0 D S 2 9 C 23 1C 8 D 3 6 D S 2 9 A 11 3 8C 8 D 2 8 P F 2 9 0 3 3 3 14 - 1 4 3 7 2 7 6 - 0C 8 D 5 0 D S 2 9 C 11 3 8C 8 D 3 5 P F 2 9 1 4 31 3 8C 8 D 2 8 P F 2 9 0 3 2 3 2C 8 D 5 0 D S 2 9 B 31 3 8C 8 D 3 5 P F 2 9 1 4 21 3 85 - 1 4 3 7 2 6 0 - 5C 8 D 2 8 P F 2 9 0 2 3 3 2C 8 D 5 0 D S 2 9 B 21 4 0C 8 D 3 5 P F 2 9 1 3 31 3 8C 8 D 2 8 P F 2 9 0 2 2 3 1C 8 D 5 0 D S 2 9 B 11 4 0C 8 D 3 5 P F 2 9 1 3 21 4 0C 8 D 2 8 P F 2 9 0 1 3 3 23 - 1 4 3 7 2 7 6 - 9C 8 D 5 0 D S 2 9 A 31 4 0C 8 D 3 5 P F 2 9 0 4 31 4 09 - 1 4 3 7 2 7 5 - 1C 8 D 2 8 P F 2 9 0 1 2 3 2C 8 D 5 0 D S 2 9 A 21 4 0C 8 D 3 5 P F 2 9 0 4 23 2C 8 D 2 8 D S 2 9 E 3 3 13 - 1 4 3 7 2 7 6 - 8C 8 D 5 0 D S 2 9 A 11 3 8C 8 D 3 5 P F 2 9 0 3 33 1C 8 D 2 8 D S 2 9 E 2 1 3 8C 8 D 4 3 P F 2 9 1 4 31 3 8C 8 D 3 5 P F 2 9 0 3 23 1C 8 D 2 8 D S 2 9 E 1 1 3 8C 8 D 4 3 P F 2 9 1 4 21 3 87 - 1 4 3 7 2 6 0 - 3C 8 D 3 5 P F 2 9 0 2 33 29 - 1 4 3 7 2 7 5 - 0C 8 D 2 8 D S 2 9 D 3 1 4 0C 8 D 4 3 P F 2 9 1 3 31 3 8C 8 D 3 5 P F 2 9 0 2 23 1C 8 D 2 8 D S 2 9 D 2 1 4 0C 8 D 4 3 P F 2 9 1 3 21 4 0C 8 D 3 5 P F 2 9 0 1 33 18 - 1 4 3 7 2 7 5 - 9C 8 D 2 8 D S 2 9 D 1 1 4 0C 8 D 4 3 P F 2 9 0 4 31 4 0C 8 D 3 5 P F 2 9 0 1 23 28 - 1 4 3 7 2 7 5 - 8C 8 D 2 8 D S 2 9 C 3 1 4 0C 8 D 4 3 P F 2 9 0 4 23 21 - 1 4 3 7 2 7 6 - 4C 8 D 3 5 D S 2 9 E 33 1C 8 D 2 8 D S 2 9 C 2 1 3 8C 8 D 4 3 P F 2 9 0 3 33 1C 8 D 3 5 D S 2 9 E 23 18 - 1 4 3 7 2 7 5 - 5C 8 D 2 8 D S 2 9 C 1 1 3 8C 8 D 4 3 P F 2 9 0 3 23 1C 8 D 3 5 D S 2 9 E 13 2C 8 D 2 8 D S 2 9 B 3 1 3 89 - 1 4 3 7 2 6 0 - 3C 8 D 4 3 P F 2 9 0 2 33 2C 8 D 3 5 D S 2 9 D 33 1C 8 D 2 8 D S 2 9 B 2 1 3 89 - 1 4 3 7 2 6 0 - 2C 8 D 4 3 P F 2 9 0 2 23 1C 8 D 3 5 D S 2 9 D 23 1C 8 D 2 8 D S 2 9 B 1 1 4 09 - 1 4 3 7 2 6 0 - 0C 8 D 4 3 P F 2 9 0 1 33 1C 8 D 3 5 D S 2 9 D 13 2C 8 D 2 8 D S 2 9 A 3 1 4 08 - 1 4 3 7 2 6 0 - 9C 8 D 4 3 P F 2 9 0 1 23 21 - 1 4 3 7 2 7 6 - 3C 8 D 3 5 D S 2 9 C 33 1C 8 D 2 8 D S 2 9 A 2 3 2C 8 D 4 3 D S 2 9 E 33 1C 8 D 3 5 D S 2 9 C 23 1C 8 D 2 8 D S 2 9 A 1 3 1C 8 D 4 3 D S 2 9 E 23 1C 8 D 3 5 D S 2 9 C 11 3 8C 8 D 2 5 P F 2 9 1 4 3 3 13 - 1 4 3 7 2 7 6 - 5C 8 D 4 3 D S 2 9 E 13 2C 8 D 3 5 D S 2 9 B 31 3 8C 8 D 2 5 P F 2 9 1 4 2 3 23 - 1 4 3 7 2 7 6 - 4C 8 D 4 3 D S 2 9 D 33 1C 8 D 3 5 D S 2 9 B 21 4 0C 8 D 2 5 P F 2 9 1 3 3 3 1C 8 D 4 3 D S 2 9 D 23 1C 8 D 3 5 D S 2 9 B 11 4 0C 8 D 2 5 P F 2 9 1 3 2 3 1C 8 D 4 3 D S 2 9 D 13 21 - 1 4 3 7 2 7 6 - 1C 8 D 3 5 D S 2 9 A 31 4 0C 8 D 2 5 P F 2 9 0 4 3 3 23 - 1 4 3 7 2 7 6 - 3C 8 D 4 3 D S 2 9 C 33 1C 8 D 3 5 D S 2 9 A 21 4 0C 8 D 2 5 P F 2 9 0 4 2 3 1C 8 D 4 3 D S 2 9 C 23 11 - 1 4 3 7 2 7 6 - 0C 8 D 3 5 D S 2 9 A 11 3 84 - 1 4 3 7 2 6 0 - 9C 8 D 2 5 P F 2 9 0 3 3 3 13 - 1 4 3 7 2 7 6 - 2C 8 D 4 3 D S 2 9 C 11 3 8C 8 D 3 1 P F 2 9 1 4 31 3 8C 8 D 2 5 P F 2 9 0 3 2 3 2C 8 D 4 3 D S 2 9 B 31 3 8C 8 D 3 1 P F 2 9 1 4 21 3 84 - 1 4 3 7 2 6 0 - 8C 8 D 2 5 P F 2 9 0 2 3 3 1C 8 D 4 3 D S 2 9 B 21 4 06 - 1 4 3 7 2 6 0 - 9C 8 D 3 1 P F 2 9 1 3 31 3 8C 8 D 2 5 P F 2 9 0 2 2 3 1C 8 D 4 3 D S 2 9 B 11 4 06 - 1 4 3 7 2 6 0 - 8C 8 D 3 1 P F 2 9 1 3 21 4 04 - 1 4 3 7 2 6 0 - 5C 8 D 2 5 P F 2 9 0 1 3 3 2C 8 D 4 3 D S 2 9 A 31 4 06 - 1 4 3 7 2 6 0 - 7C 8 D 3 1 P F 2 9 0 4 31 4 0C 8 D 2 5 P F 2 9 0 1 2 3 1C 8 D 4 3 D S 2 9 A 21 4 0C 8 D 3 1 P F 2 9 0 4 23 2C 8 D 2 5 D S 2 9 E 3 3 1C 8 D 4 3 D S 2 9 A 11 3 8C 8 D 3 1 P F 2 9 0 3 33 1C 8 D 2 5 D S 2 9 E 2 1 3 8C 8 D 4 0 P F 2 9 1 4 31 3 8C 8 D 3 1 P F 2 9 0 3 23 1C 8 D 2 5 D S 2 9 E 1 1 3 8C 8 D 4 0 P F 2 9 1 4 21 3 86 - 1 4 3 7 2 6 0 - 6C 8 D 3 1 P F 2 9 0 2 33 28 - 1 4 3 7 2 7 5 - 4C 8 D 2 5 D S 2 9 D 3 1 4 0C 8 D 4 0 P F 2 9 1 3 31 3 8C 8 D 3 1 P F 2 9 0 2 23 1C 8 D 2 5 D S 2 9 D 2 1 4 0C 8 D 4 0 P F 2 9 1 3 21 4 06 - 1 4 3 7 2 6 0 - 5C 8 D 3 1 P F 2 9 0 1 33 18 - 1 4 3 7 2 7 5 - 3C 8 D 2 5 D S 2 9 D 1 1 4 08 - 1 4 3 7 2 6 0 - 6C 8 D 4 0 P F 2 9 0 4 31 4 0C 8 D 3 1 P F 2 9 0 1 23 28 - 1 4 3 7 2 7 5 - 2C 8 D 2 5 D S 2 9 C 3 1 4 0C 8 D 4 0 P F 2 9 0 4 23 2C 8 D 3 1 D S 2 9 E 33 1C 8 D 2 5 D S 2 9 C 2 Card Edge Connectors Part Number Cross Reference—Acquired Part Number to Tyco Part Number Acquired T y c o Acquired T y c o P a g eP a g e Part Part Part Part N u m b e rN u m b e r N u m b e rN u m b e rN u m b e rN u m b e r —— — —— —— — —— —— —— —— —— —— —— — —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— — —— — — —— —— —— —— — —— — —— — —— — —— —— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 201 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 3 4W 8 D 4 0 D S 2 9 0 9 3 3 4W 8 D 4 0 D S 2 9 0 6 3 1 3 62 - 1 4 3 7 2 6 5 - 8W 8 D 3 6 P F 2 9 0 9 3 1 3 6W 8 D 3 6 P F 2 9 0 9 2 1 3 6W 8 D 3 6 P F 2 9 0 6 3 1 3 6W 8 D 3 6 P F 2 9 0 6 2 1 3 42 - 1 4 3 7 2 6 5 - 7W 8 D 3 6 P F 2 9 0 4 3 1 3 4W 8 D 3 6 P F 2 9 0 4 2 1 3 42 - 1 4 3 7 2 6 5 - 6W 8 D 3 6 P F 2 9 0 1 3 1 3 4W 8 D 3 6 P F 2 9 0 1 2 3 4W 8 D 3 6 D S 2 9 0 9 3 3 4W 8 D 3 6 D S 2 9 0 6 3 1 3 6W 8 D 3 5 P F 2 9 0 9 3 1 3 6W 8 D 3 5 P F 2 9 0 9 2 1 3 62 - 1 4 3 7 2 6 5 - 5W 8 D 3 5 P F 2 9 0 6 3 1 3 6W 8 D 3 5 P F 2 9 0 6 2 1 3 4W 8 D 3 5 P F 2 9 0 4 3 1 3 4W 8 D 3 5 P F 2 9 0 4 2 1 3 42 - 1 4 3 7 2 6 5 - 3W 8 D 3 5 P F 2 9 0 1 3 1 3 4W 8 D 3 5 P F 2 9 0 1 2 3 4W 8 D 3 5 D S 2 9 0 9 3 3 4W 8 D 3 5 D S 2 9 0 6 3 1 3 6W 8 D 3 0 P F 2 9 0 9 3 1 3 6W 8 D 3 0 P F 2 9 0 9 2 1 3 6W 8 D 3 0 P F 2 9 0 6 3 1 3 6W 8 D 3 0 P F 2 9 0 6 2 1 3 42 - 1 4 3 7 2 6 5 - 1W 8 D 3 0 P F 2 9 0 4 3 1 3 4W 8 D 3 0 P F 2 9 0 4 2 1 3 42 - 1 4 3 7 2 6 5 - 0W 8 D 3 0 P F 2 9 0 1 3 1 3 4W 8 D 3 0 P F 2 9 0 1 2 3 4W 8 D 3 0 D S 2 9 0 9 3 3 4W 8 D 3 0 D S 2 9 0 6 3 1 3 61 - 1 4 3 7 2 6 5 - 7W 8 D 2 8 P F 2 9 0 9 3 1 3 6W 8 D 2 8 P F 2 9 0 9 2 1 3 6W 8 D 2 8 P F 2 9 0 6 3 1 3 6W 8 D 2 8 P F 2 9 0 6 2 1 3 4W 8 D 2 8 P F 2 9 0 4 3 1 3 4W 8 D 2 8 P F 2 9 0 4 2 1 3 41 - 1 4 3 7 2 6 5 - 6W 8 D 2 8 P F 2 9 0 1 3 1 3 4W 8 D 2 8 P F 2 9 0 1 2 1 3 6W 8 D 6 0 P F 2 9 0 9 33 4W 8 D 2 8 D S 2 9 0 9 3 1 3 6W 8 D 6 0 P F 2 9 0 9 23 4W 8 D 2 8 D S 2 9 0 6 3 1 3 6W 8 D 6 0 P F 2 9 0 6 31 3 61 - 1 4 3 7 2 6 5 - 5W 8 D 2 5 P F 2 9 0 9 3 1 3 6W 8 D 6 0 P F 2 9 0 6 21 3 6W 8 D 2 5 P F 2 9 0 9 2 1 3 4W 8 D 6 0 P F 2 9 0 4 31 3 61 - 1 4 3 7 2 6 5 - 4W 8 D 2 5 P F 2 9 0 6 3 1 3 4W 8 D 6 0 P F 2 9 0 4 21 3 6W 8 D 2 5 P F 2 9 0 6 2 1 3 43 - 1 4 3 7 2 6 5 - 9W 8 D 6 0 P F 2 9 0 1 31 3 4W 8 D 2 5 P F 2 9 0 4 3 1 3 4W 8 D 6 0 P F 2 9 0 1 21 3 4W 8 D 2 5 P F 2 9 0 4 2 3 4W 8 D 6 0 D S 2 9 0 9 31 3 41 - 1 4 3 7 2 6 5 - 3W 8 D 2 5 P F 2 9 0 1 3 3 4W 8 D 6 0 D S 2 9 0 6 31 3 4W 8 D 2 5 P F 2 9 0 1 2 1 3 6W 8 D 5 0 P F 2 9 0 9 33 4W 8 D 2 5 D S 2 9 0 9 3 1 3 6W 8 D 5 0 P F 2 9 0 9 23 4W 8 D 2 5 D S 2 9 0 6 3 1 3 6W 8 D 5 0 P F 2 9 0 6 31 3 6W 8 D 2 2 P F 2 9 0 9 3 1 3 63 - 1 4 3 7 2 6 5 - 7W 8 D 5 0 P F 2 9 0 6 21 3 6W 8 D 2 2 P F 2 9 0 9 2 1 3 43 - 1 4 3 7 2 6 5 - 6W 8 D 5 0 P F 2 9 0 4 31 3 6W 8 D 2 2 P F 2 9 0 6 3 1 3 4W 8 D 5 0 P F 2 9 0 4 21 3 6W 8 D 2 2 P F 2 9 0 6 2 1 3 43 - 1 4 3 7 2 6 5 - 5W 8 D 5 0 P F 2 9 0 1 31 3 41 - 1 4 3 7 2 6 5 - 2W 8 D 2 2 P F 2 9 0 4 3 1 3 43 - 1 4 3 7 2 6 5 - 4W 8 D 5 0 P F 2 9 0 1 21 3 4W 8 D 2 2 P F 2 9 0 4 2 3 4W 8 D 5 0 D S 2 9 0 9 31 3 4W 8 D 2 2 P F 2 9 0 1 3 3 4W 8 D 5 0 D S 2 9 0 6 31 3 4W 8 D 2 2 P F 2 9 0 1 2 1 3 6W 8 D 4 5 P F 2 9 0 9 33 4W 8 D 2 2 D S 2 9 0 9 3 1 3 6W 8 D 4 5 P F 2 9 0 9 23 4W 8 D 2 2 D S 2 9 0 6 3 1 3 6W 8 D 4 5 P F 2 9 0 6 31 3 6W 8 D 2 0 P F 2 9 0 9 3 1 3 6W 8 D 4 5 P F 2 9 0 6 21 3 6W 8 D 2 0 P F 2 9 0 9 2 1 3 4W 8 D 4 5 P F 2 9 0 4 31 3 6W 8 D 2 0 P F 2 9 0 6 3 1 3 4W 8 D 4 5 P F 2 9 0 4 21 3 6W 8 D 2 0 P F 2 9 0 6 2 1 3 4W 8 D 4 5 P F 2 9 0 1 31 3 4W 8 D 2 0 P F 2 9 0 4 3 1 3 4W 8 D 4 5 P F 2 9 0 1 21 3 4W 8 D 2 0 P F 2 9 0 4 2 3 4W 8 D 4 5 D S 2 9 0 9 31 3 4W 8 D 2 0 P F 2 9 0 1 3 3 4W 8 D 4 5 D S 2 9 0 6 31 3 4W 8 D 2 0 P F 2 9 0 1 2 1 3 6W 8 D 4 3 P F 2 9 0 9 33 4W 8 D 2 0 D S 2 9 0 9 3 1 3 6W 8 D 4 3 P F 2 9 0 9 23 4W 8 D 2 0 D S 2 9 0 6 3 1 3 6W 8 D 4 3 P F 2 9 0 6 31 3 6W 8 D 1 8 P F 2 9 0 9 3 1 3 6W 8 D 4 3 P F 2 9 0 6 21 3 6W 8 D 1 8 P F 2 9 0 9 2 1 3 4W 8 D 4 3 P F 2 9 0 4 31 3 61 - 1 4 3 7 2 6 5 - 0W 8 D 1 8 P F 2 9 0 6 3 1 3 4W 8 D 4 3 P F 2 9 0 4 21 3 6W 8 D 1 8 P F 2 9 0 6 2 1 3 4W 8 D 4 3 P F 2 9 0 1 31 3 4W 8 D 1 8 P F 2 9 0 4 3 1 3 4W 8 D 4 3 P F 2 9 0 1 21 3 4W 8 D 1 8 P F 2 9 0 4 2 3 4W 8 D 4 3 D S 2 9 0 9 31 3 4W 8 D 1 8 P F 2 9 0 1 3 3 4W 8 D 4 3 D S 2 9 0 6 31 3 4W 8 D 1 8 P F 2 9 0 1 2 1 3 6W 8 D 4 0 P F 2 9 0 9 33 4W 8 D 1 8 D S 2 9 0 9 3 1 3 6W 8 D 4 0 P F 2 9 0 9 23 4W 8 D 1 8 D S 2 9 0 6 3 1 3 6W 8 D 4 0 P F 2 9 0 6 31 2 93 - 1 4 3 7 2 6 4 - 6C 9 D 0 6 0 P F 6 0 0 4 8 1 3 6W 8 D 4 0 P F 2 9 0 6 21 2 9C 9 D 0 5 0 P F 6 0 0 4 8 1 3 4W 8 D 4 0 P F 2 9 0 4 31 2 9C 9 D 0 4 0 P F 6 0 0 4 8 1 3 4W 8 D 4 0 P F 2 9 0 4 21 2 93 - 1 4 3 7 2 6 4 - 5C 9 D 0 3 0 P F 6 0 0 4 8 1 3 43 - 1 4 3 7 2 6 5 - 0W 8 D 4 0 P F 2 9 0 1 31 2 93 - 1 4 3 7 2 6 4 - 4C 9 D 0 2 0 P F 6 0 0 4 8 1 3 4W 8 D 4 0 P F 2 9 0 1 21 3 8C 8 D 6 0 P F 2 9 1 4 3 Card Edge Connectors Related Product Information For additional component solutions for Industrial Machinery, Instrumentation, Security, and related appli- cations, request the follow- ing brochures: Brochure No. 889439 – Industrial Machinery Brochure No. 1307285 – Instrumentation Brochure No. 1308325 – Security These brochures list cata- log sources for connectors, switches, terminal blocks, relays, timers, circuit break- ers, and cable assemblies available from Tyco Electronics. 202 Catalog 1654080 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 7-03 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in bold Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are imperial equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Global Contacts Americas Argentina – Buenos Aires Canada – Markham Mexico – Mexico City For Latin/South American Phone: +54-11-4733-2200 Phone: +905-475-6222 Phone: +52-55-5-729-0425 Countries not shown Fax: +54-11-4733-2250 Fax: +905-474-5520 Fax: +52-55-5-398-1430 Phone: +57-1-240-9396 Product Information Center: Fax: +57-1-660-0206 Brasil – São Paulo (Technical Support) United States – Harrisburg, PA Phone: +55-11-3611-1311 Phone: +905-470-4425 Phone: +717-564-0100 Fax: +55-11-3611-0397 Fax: +905-474-5525 Fax: +717-986-7575 Product Information Center: Colombia – Bogota (Technical Support) Phone: +57-1-240-9396 Phone: +800-522-6752 Fax: +57-1-660-0206 Fax: +717-986-7575 Asia/Pacific Australia – Sydney Japan – Kawasaki, Kanagawa New Zealand – Auckland Singapore – Singapore Phone: +61-2-9840-8200 Phone: +81-44-844-8079 Phone: +64-9-634-4580 Phone: +65-482-0311 Fax: +61-2-9899-5649 Fax: +81-44-844-8733 Fax: +64-9-634-4586 Fax: +65-482-1012 Product Information Center: Product Information Center: Raychem Products (Technical Support) (Technical Support) Philippines – Makati City Phone: +65-486-6151 Phone: +61-2-9554-2600 Phone: +81-44-844-8013 Phone: +632-867-8641 Fax: +65-654-5514 Fax: +61-2-9502-2556 Fax: +81-44-812-3200 Fax: +632-867-8661 Raychem Products Taiwan – Taipei India – Bangalore Phone: +81-44-900-5102 People’s Republic of China Phone: +886-2-2664-9977 Phone: +91-80-841-0200 Fax: +81-44-5025-5027 Hong Kong Fax: +886-2-2664-9900 Fax: +91-80-841-0210 Phone: +852-2735-1628 Korea – Seoul Fax: +852-2735-0243 Thailand – Bangkok Indonesia – Jakarta Phone: +82-2-3274-0535 Phone: +66-2-955-0500 Phone: +6221-526-7852 Fax: +82-2-3274-0524/0531 Fax: +66-2-955-0505 Shanghai Fax: +6221-526-7856 Phone: +86-21-6485-0602 Malaysia – Selangor Fax: +86-21-6485-0728 Vietnam – Ho Chi Minh City Phone: +60-3-7053055 Phone: +84-8-8232-546/7 Fax: +60-3-7053066 Shunde Fax: +84-8-8221-443 Phone: +86-765-775-1368 Fax: +86-765-775-2823 Europe/Middle East/Africa Spain – Barcelona Austria – Vienna Germany – Bensheim Italy – Collegno (Torino) Phone: +34-93-291-0330 Phone: +43-190-560-0 Phone: +49-6251-133-0 Phone: +39-011-4012-111 Fax: +34-93-201-7879 Fax: +43-190-560-1333 Fax: +49-6251-133-1600 Fax: +39-011-4031-116 Product Information Center: Product Information Center: Lithuania – Vilnius (Technical Support): (Technical Support) Belgium – Kessel-Lo Phone: +370-5-21-31-402 Phone: +34-93-291-0330 Phone: +49-6251-133-1999 Phone: +32-16-352-300 Fax: +370-5-21-31-403 Fax: +34-93-200-3779 Fax: +49-6251-133-1988 Fax: +32-16-352-352 Netherlands – ’s-Hertogenbosch Sweden – Upplands Väsby Germany – Langen Bulgaria – Sofia Phone: +31-73-6246-246 Phone: +46-8-50-72-50-00 Phone: +49-6103-709-0 Phone: +359-2-971-2152 Fax: +31-73-6212-365 Fax: +46-8-50-72-50-01 Fax: +49-6103-709-1223 Fax: +359-2-971-2153 Product Information Center: (Technical Support) Germany – Speyer Switzerland – Steinach Phone: +31-73-6246-999 Czech Republic – Kurim Phone: +49-6232-30-0 Phone: +41-71-447-0447 Fax: +31-73-6246-998 Phone: +420-5-41-162-111 Fax: +49-6232-30-2243 Fax: +41-71-447-0444 Fax: +420-5-41-162-223 Norway – Nesbru Phone: +47-66-77-88-99 Turkey – Istanbul Germany Denmark – Viby J Fax: +47-66-77-88-55 Phone: +90-212-281-8181…3 HTS Division – Neunkirchen Phone: +45-70-15-52-00 +90-212-282-5130/5430 Phone: +49-2247-305-0 Fax: +45-86-29-51-33 Poland – Warsaw Fax: +90-212-281-8184 Fax: +49-2247-305-122 Phone: +48-22-5490-888 Egypt – Cairo Fax: +48-22-5490-880 Ukraine – Kiev Great Britain – Phone: +20-2-417-76-47 Phone: +38-044-238-6908 Stanmore Middlesex Romania – Bucharest Fax: +20-2-419-23-34 Fax: +38-044-568-5740 Phone: +44-181-954-2356 Phone: +40-1-311-3479+3596 Fax: +44-181-954-6234 Fax: +40-1-312-0574 Estonia – Tallinn Product Information Center: Phone: +372-65-05-474 (Technical Support) Russia – Moscow Fax: +372-65-05-470 Freephone GB: 0800-267-666 Phone: +7-095-926-55-06…09 Phone: +44-141 810 8967…69 Fax: +7-095-926-55-05 Finland – Helsinki Fax: +44-141 810 8971 Russia – St. Petersburg Phone: +358-95-12-34-20 Great Britain – Dorcan, Swindon Phone: +7-812-325-30-83 Fax: +358-95-12-34-250 Raychem Products Fax: +7-812-325-32-88 Phone: +44-1793-528171 Fax: +44-1793-572516 France – Cergy-Pontoise Scotland – Dundee Phone: +33-1-3420-8888 Greece – Athens Madison Cable Products Fax: +33-1-3420-8600 Phone: +30-1-9370-396/397 Phone: +44-1382-508080 Product Information Center: Fax: +30-1-9370-655 Fax: +44-1382-505060 (Technical Support) Phone: +33-1-3420-8943 Slovakia – Banská Bystrica Hungary – Budapest Fax: +33-1-3420-8623 Phone: +421-48-415-20-11/12 Phone: +36-1-289-1000 Fax: +421-48-415-20-13 Fax: +36-1-289-1010 France Ireland – Dublin Tyco Electronics Export – Slovenia – Ljubljana Phone: +353-1-820-3000 St Ouen L’Aumone Phone: +386-1561-3270 Fax: +353-1-820-9790 Phone: +33-1-3440-7200 Fax: +386-1561-3240 Fax: +33-1-3440-7220 or Israel – Yokneam +33-1-3440-7230 South Africa – Port Elizabeth Phone: +972-4-959-0508 Phone: +27-41-405-4500 Fax: +972-4-959-0506 Fax: +27-41-486-1314 203 1654080–7.5M–SK–CAD–7-03–0G3B Tyco Electronics Corporation Printed in U.S.A. www.tycoelectronics.com TYCO ELECTRONICS CORPORATION WWW.TYCOELECTRONICS.COM