Catalog 1308242 Issued 3-03 (PDF Revised 9-12) P&B 600 series 15 Amp Sensitive PC Board Relay File E55708 File LR48569 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength • Low power sensitive coil. Between Open Contacts: 500VAC, 60 Hz., 2 seconds. • 1 Form A, 1 Form B and 1 Form C contact arrangements. Between Coil and Contacts: 1,000VAC, 60 Hz., 2 seconds. • Various contact materials and types for ratings to 15 amps. • Coil assembly rated 130°C, 94V-O. • Applications include sensor and timer controls, emergency lighting, instr- mentation, alarm systems, smoke and fire detectors, business equip- ment and vending machines. Coil Data @ 25°C Rated Voltage: 3 to 48VDC. Contact Data Maximum Voltage @ 85°C: 120% of Rated Voltage. Nominal Power @ 25°C: 110mW for 3A and 5A rated models; Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC) and 1 Form C 240mW for 15A rated models. (SPDT). Maximum Power @ 25°C: 1W. Material and Type: Gold-silver crossbar, silver-cadmium crossbar, palladi- Duty Cycle: Continuous. um crossbar, gold-flashed silver cadmium, silver sadmium oxide, find sil- Initial Insulation Resistance: 10,000 megohms, min., at 25°C, 500VDC ver, gold-flashed coin silver. and 50% rel. humidity. Expected Mechanical Life: 10 million operations, minimum. Expected Electrical Life: 100,000 operations, minimum, at rated load. UL/CSA Ratings @ 25°C Coil Data @ 25°C Code Contact Material Rating DC Resistance in Ohms Must Must B Au Flashed AgCd 75VA@24VAC Pilot Duty§ Nominal ±10% Operate Release 1A@120VAC General Purpose Voltage Voltage Voltage 1.5A@50VDC Resistive VDC 3 A & 5A Types 15A Types VDC VDC 600W@277VAC Gen’l. Purpose SPST-NO Only 3 82 38 2.25 0.3 240W@277VAC Gen’l. Purpose SPST-NC Only 6 327 150 4.5 0.6 480VA@277VAC Pilot Duty SPDT Only 9 736 338 6.75 0.9 480VA@Ballast SPDT Only 12 1,309 600 9.0 1.2 1/10 HP@120VAC 18 2,945 1,350 13.5 1.8 G Au Ag 3A@28VDC Resistive 24 5,236 2,400 18.0 2.4 125VA@120VAC Pilot Duty§ 28 7,127 3,267 21.0 2.8 1/8 HP@120/240 VAC 48 20,945 9,600 36.0 4.8 H AgCdO 15A@150VAC Inductive 0.4 PF NO Only 10A@277VAC Resistive 15A@28VDC Resistive Operate Data @ 25°C TV5@NO Contacts Must Operate Voltage: 75% of nominal. TV2@NC Contacts Must Release Voltage: 10% of nominal. 600W@277VAC Tungsten SPDT-NO Only Operate Time: 10 ms, typ. 240W@277VAC Tungsten SPDT-NC Only Release Time: 10 ms, typ. 480VA@277VAC Pilot Duty SPDT Only § 480VA@277VAC Ballast SPDT Only 1/3 HP@120/240VAC NO 1/6 HP@120/240VAC NC K Au Flashed Coin Ag 5A@240VAC Resistive 5A@28VDC Environmental Data 125VA@240VAC Pilot Duty § Temperature Range: 125VA@125VAC Pilot Duty § Storage: -55°C to +85°C. R Fine Ag 15A@150VAC Resistive Operating: -55°C to +85°C. 15A@28VDC Resistive 10A@277VAC Resistive 480VA@240VAC Pilot Duty TV2@NC Contacts TV4@NO Contacts 480W@120VAC Tungsten NO 240W@120VAC Tungsten NC S Ag Cd 3A@240VAC Resistive Mechanical Data 3A@28VDC Resistive Termination: Printed circuit terminals. V Palladium 2A@28VDC Resistive Enclosures: Unsealed dust cover or sealed plastic case. Weight: 1.6 oz. (45g) approximately. § Only when Code Y Electrical Spacing is specified. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 497 specified. Refer to inside back cover. Catalog 1308242 P&B Issued 3-03 (PDF Revised 9-12) Ordering Information Typical Part Number > 60 3 – 24 VY Q 1. Basic Series Type: 60 = Miniature, PC board relay rated 3A or 5A (Contact Material Code G, S, V or B only) 61 = Miniature, PC board relay rated 15A (Contact Material Code H or R only) 65 = Miniature, PC board relay rated 5A (Contact Material Code K only) 2. Contact Arrangement: 1 = 1 Form A (SPST-NO) 2 = 1 Form B (SPST-NC) 3 = 1 Form C (SPDT) 3. Coil Voltage: 3 = 3VDC 9 = 9VDC 18 = 18VDC 28 = 28VDC 6 = 6VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 4. Contact Material: G = Au Ag crossbar, rated 3A (Only available with Basic Series Type 60). S = Au Cd crossbar, rated 3A (Only available with Basic Series Type 60). V = Pd crossbar, rated 3A (Only available with Basic Series Type 60). B = Au-flashed AgCd crossbar, rated 5A (Only available with Basic Series Type 60). H = AgCdO, rated 15A (Only available with Basic Series Type 61). R = Fine Ag, rated 15A (Only available with Basic Series Type 61). K = Au-flashed coin Ag, rated 5A (Only available with Basic Series Type 65). 5. Electrical Spacing: Leave Blank = 0.125 in (3.175 mm) Clearance and 0.125 in (3.175 mm) Creepage Y = 0.125 in (3.175 mm) Clearance and 0.250 in (6.35 mm) Creepage 6. Enclosure Type Leave Blank = Unsealed dust cover Q = Sealed cover Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. PC Board Layout (Bottom View) Outline Dimensions .546 .775 MAX. (13.9) 1.250 MAX. .273 (19.69) (31.75) (6.93) .067 DIA. TYP. .313 (1.70) (7.95) 1.200 MAX. (30.48) .843 (21.4) .240 (6.1) .297 (7.54) .594 (15.1) Note: On single throw models, only necessary terminals are present. Wiring Diagrams (Bottom Views) Disclaimer 1 Form B 1 Form C 1 Form A While TE has made every reasonable effort to ensure the accuracy of the infor- (SPST-NC) (SPDT) (SPST-NO) mation in this document , TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are sub- ject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. © 2012 Tyco Electronics Corporation a TE Connectivity Ltd. company TE Connectivity (logo) and TE Connectivity are trademarks of the TE Connectivity group of companies and its licensors. Note: On single throw models, only necessary terminals are present. Other logos, product or company names may be trademarks of their respective owners. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 498 specified. Refer to inside back cover.